Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 28/06/2006, à 08:09

kryss

Re : installation d un deuxieme disque dur de donnees

dmesg

[17179569.184000] Linux version 2.6.15-25-k7 (buildd@terranova) (gcc version 4.0 .3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Wed Jun 14 11:43:20 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 255MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 65520
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 61424 pages, LIFO batch:15
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 VIA694                                ) @ 0x0 00f73f0
[17179569.184000] ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @  0x0fff3000
[17179569.184000] ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @  0x0fff3040
[17179569.184000] ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @  0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 10000000:e fff0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/mapper/Ubuntu-root ro quiet spl ash
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (01282000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[17179569.184000] Detected 1300.245 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.920000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes )
[17179571.920000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.932000] Memory: 248308k/262080k available (2094k kernel code, 13212k r eserved, 597k data, 332k init, 0k highmem)
[17179571.932000] Checking if this processor honours the WP bit even in supervis or mode... Ok.
[17179572.012000] Calibrating delay using timer specific routine.. 2603.06 BogoM IPS (lpj=5206132)
[17179572.012000] Security Framework v1.0.0 initialized
[17179572.012000] SELinux:  Disabled at boot.
[17179572.012000] Mount-cache hash table entries: 512
[17179572.012000] CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
[17179572.012000] CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 0 0000000 00000000 00000000 00000000
[17179572.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/li ne)
[17179572.012000] CPU: L2 Cache: 64K (64 bytes/line)
[17179572.012000] CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 0000042 0 00000000 00000000 00000000
[17179572.012000] mtrr: v2.0 (20020519)
[17179572.012000] Enabling fast FPU save and restore... done.
[17179572.012000] Enabling unmasked SIMD FPU exception support... done.
[17179572.012000] Checking 'hlt' instruction... OK.
[17179572.028000] SMP alternatives: switching to UP code
[17179572.028000] checking if image is initramfs... it is
[17179572.852000] Freeing initrd memory: 6761k freed
[17179572.904000] ACPI: Looking for DSDT ... not found!
[17179572.908000] ACPI: setting ELCR to 0200 (from 1a20)
[17179572.936000] CPU0: AMD Duron(tm) processor stepping 01
[17179572.936000] SMP motherboard not detected.
[17179572.936000] Local APIC not detected. Using dummy APIC emulation.
[17179572.936000] Brought up 1 CPUs
[17179572.936000] NET: Registered protocol family 16
[17179572.936000] EISA bus registered
[17179572.936000] ACPI: bus type pci registered
[17179572.972000] PCI: PCI BIOS revision 2.10 entry at 0xfb0d0, last bus=1
[17179572.972000] PCI: Using configuration type 1
[17179572.972000] ACPI: Subsystem revision 20051216
[17179573.012000] ACPI: Interpreter enabled
[17179573.012000] ACPI: Using PIC for interrupt routing
[17179573.012000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.012000] PCI: Probing PCI hardware (bus 00)
[17179573.012000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179573.016000] Boot video device is 0000:01:00.0
[17179573.016000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.036000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14  15)
[17179573.036000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179573.036000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14  15)
[17179573.036000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14  15)
[17179573.044000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.044000] pnp: PnP ACPI init
[17179573.048000] pnp: PnP ACPI: found 13 devices
[17179573.048000] PnPBIOS: Disabled by ACPI PNP
[17179573.048000] PCI: Using ACPI for IRQ routing
[17179573.048000] PCI: If a device doesn't work, try "pci=routeirq".  If it help s, post a report
[17179573.072000] PCI: Bridge: 0000:00:01.0
[17179573.072000]   IO window: disabled.
[17179573.072000]   MEM window: ec000000-edffffff
[17179573.072000]   PREFETCH window: e0000000-e7ffffff
[17179573.072000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179573.072000] audit: initializing netlink socket (disabled)
[17179573.072000] audit(1151476221.068:1): initialized
[17179573.072000] VFS: Disk quotas dquot_6.5.1
[17179573.072000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.072000] Initializing Cryptographic API
[17179573.072000] io scheduler noop registered
[17179573.072000] io scheduler anticipatory registered
[17179573.072000] io scheduler deadline registered
[17179573.072000] io scheduler cfq registered
[17179573.072000] isapnp: Scanning for PnP cards...
[17179573.428000] isapnp: No Plug & Play device found
[17179573.448000] Real Time Clock Driver v1.12
[17179573.448000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179573.448000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179573.452000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.452000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.452000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ shar ing enabled
[17179573.452000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.452000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.456000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.456000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.456000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 b locksize
[17179573.456000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.456000] ide: Assuming 33MHz system bus speed for PIO modes; override w ith idebus=xx
[17179573.456000] mice: PS/2 mouse device common for all mice
[17179573.456000] EISA: Probing bus 0 at eisa.0
[17179573.456000] Cannot allocate resource for EISA slot 4
[17179573.456000] EISA: Detected 0 cards.
[17179573.456000] NET: Registered protocol family 2
[17179573.496000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes )
[17179573.496000] TCP established hash table entries: 16384 (order: 5, 196608 by tes)
[17179573.496000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[17179573.496000] TCP: Hash tables configured (established 16384 bind 16384)
[17179573.496000] TCP reno registered
[17179573.496000] TCP bic registered
[17179573.496000] NET: Registered protocol family 1
[17179573.496000] NET: Registered protocol family 8
[17179573.496000] NET: Registered protocol family 20
[17179573.496000] Using IPI No-Shortcut mode
[17179573.496000] ACPI wakeup devices:
[17179573.496000] SLPB PCI0 USB0 USB1 AC97 MC97 LAN0 UAR1 ECP1
[17179573.496000] ACPI: (supports S0 S1 S4 S5)
[17179573.496000] Freeing unused kernel memory: 332k freed
[17179573.584000] vga16fb: initializing
[17179573.584000] vga16fb: mapped to 0xc00a0000
[17179573.708000] Console: switching to colour frame buffer device 80x25
[17179573.708000] fb0: VGA16 VGA frame buffer device
[17179573.764000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.832000] Capability LSM initialized
[17179574.892000] ACPI: Fan [FAN] (on)
[17179574.896000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[17179574.896000] ACPI: Processor [CPU0] (supports 2 throttling states)
[17179574.900000] ACPI: Thermal Zone [THRM] (40 C)
[17179576.048000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[17179576.048000] **** SET: Misaligned resource pointer: ceb69ce2 Type 07 Len 0
[17179576.048000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[17179576.048000] PCI: setting IRQ 11 as level-triggered
[17179576.048000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 ( level, low) -> IRQ 11
[17179576.048000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 11
[17179576.048000] VP_IDE: chipset revision 6
[17179576.048000] VP_IDE: not 100% native mode: will probe irqs later
[17179576.048000] VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000 :00:11.1
[17179576.048000]     ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb :DMA
[17179576.048000]     ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd :DMA
[17179576.048000] Probing IDE interface ide0...
[17179576.464000] hda: ST320410A, ATA DISK drive
[17179576.912000] hdb: HL-DT-ST DVDRAM GSA-4082B, ATAPI CD/DVD-ROM drive
[17179576.972000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.980000] Probing IDE interface ide1...
[17179577.620000] hdd: ST320414A, ATA DISK drive
[17179577.676000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.688000] hda: max request size: 128KiB
[17179577.712000] hda: 39851760 sectors (20404 MB) w/2048KiB Cache, CHS=39535/16 /63, UDMA(100)
[17179577.712000] hda: cache flushes not supported
[17179577.712000]  hda: hda1 hda2 < hda5 >
[17179577.764000] hdd: max request size: 128KiB
[17179577.764000] hdd: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16 /63, UDMA(100)
[17179577.764000] hdd: cache flushes not supported
[17179577.764000]  hdd:<6>hdb: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB  Cache, UDMA(33)
[17179577.764000] Uniform CD-ROM driver Revision: 3.20
[17179577.772000]  hdd1
[17179578.224000] usbcore: registered new driver usbfs
[17179578.228000] usbcore: registered new driver hub
[17179578.228000] USB Universal Host Controller Interface driver v2.3
[17179578.228000] **** SET: Misaligned resource pointer: ceb69922 Type 07 Len 0
[17179578.232000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[17179578.232000] PCI: setting IRQ 5 as level-triggered
[17179578.232000] ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 5 (l evel, low) -> IRQ 5
[17179578.232000] uhci_hcd 0000:00:11.2: UHCI Host Controller
[17179578.232000] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus nu mber 1
[17179578.232000] uhci_hcd 0000:00:11.2: irq 5, io base 0x0000d800
[17179578.232000] hub 1-0:1.0: USB hub found
[17179578.232000] hub 1-0:1.0: 2 ports detected
[17179578.336000] ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 5 (l evel, low) -> IRQ 5
[17179578.336000] uhci_hcd 0000:00:11.3: UHCI Host Controller
[17179578.336000] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus nu mber 2
[17179578.336000] uhci_hcd 0000:00:11.3: irq 5, io base 0x0000dc00
[17179578.336000] hub 2-0:1.0: USB hub found
[17179578.336000] hub 2-0:1.0: 2 ports detected
[17179578.552000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@ redhat.com
[17179578.704000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[17179579.132000] usbcore: registered new driver hiddev
[17179579.152000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
[17179579.152000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] o n usb-0000:00:11.2-2
[17179579.152000] usbcore: registered new driver usbhid
[17179579.152000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179579.224000] Attempting manual resume
[17179579.304000] EXT3-fs: mounted filesystem with ordered data mode.
[17179579.332000] kjournald starting.  Commit interval 5 seconds
[17179593.652000] ts: Compaq touchscreen protocol output
[17179596.744000] irda_init()
[17179596.744000] NET: Registered protocol family 23
[17179596.780000] Linux agpgart interface v0.101 (c) Dave Jones
[17179596.800000] agpgart: Detected VIA KT266/KY266x/KT333 chipset
[17179596.804000] agpgart: AGP aperture is 64M @ 0xe8000000
[17179597.416000] input: PC Speaker as /class/input/input2
[17179597.796000] **** SET: Misaligned resource pointer: ce407342 Type 07 Len 0
[17179597.796000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
[17179597.796000] PCI: setting IRQ 12 as level-triggered
[17179597.796000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 12 ( level, low) -> IRQ 12
[17179597.796000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179597.816000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179597.856000] Floppy drive(s): fd0 is 1.44M
[17179597.872000] FDC 0 is a post-1991 82077
[17179597.880000] 8139too Fast Ethernet driver 0.9.27
[17179597.880000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 ( level, low) -> IRQ 11
[17179597.880000] eth0: RealTek RTL8139 at 0xd099a000, 00:50:fc:9f:29:53, IRQ 11
[17179597.880000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[17179597.976000] parport: PnPBIOS parport detected.
[17179597.976000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRIST ATE,COMPAT,ECP,DMA]
[17179598.328000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179598.376000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179598.768000] nvidia: module license 'NVIDIA' taints kernel.
[17179598.776000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 ( level, low) -> IRQ 11
[17179598.780000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7174  Tue Mar 22 06:44:39 PST 2005
[17179599.108000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179599.236000] Intel ISA PCIC probe: not found.
[17179599.460000] lp0: using parport0 (interrupt-driven).
[17179599.564000] fuse init (API version 7.3)
[17179599.684000] Adding 765944k swap on /dev/mapper/Ubuntu-swap_1.  Priority:-1  extents:1 across:765944k
[17179599.864000] EXT3 FS on dm-0, internal journal
[17179600.148000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179600.148000] md: bitmap version 4.39
[17179600.152000] NET: Registered protocol family 17
[17179602.704000] NET: Registered protocol family 10
[17179602.704000] lo: Disabled Privacy Extensions
[17179602.708000] IPv6 over IPv4 tunneling driver
[17179603.600000] kjournald starting.  Commit interval 5 seconds
[17179603.600000] EXT3 FS on hda1, internal journal
[17179603.600000] EXT3-fs: mounted filesystem with ordered data mode.
[17179603.612000] kjournald starting.  Commit interval 5 seconds
[17179603.612000] EXT3 FS on hdd1, internal journal
[17179603.612000] EXT3-fs: mounted filesystem with ordered data mode.
[17179605.240000] ACPI: Power Button (FF) [PWRF]
[17179605.240000] ACPI: Power Button (CM) [PWRB]
[17179605.240000] ACPI: Sleep Button (CM) [SLPB]
[17179605.408000] ibm_acpi: ec object not found
[17179605.456000] pcc_acpi: loading...
[17179613.704000] eth0: no IPv6 routers present
[17179614.592000] ppdev: user-space parallel port driver
[17179618.040000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179618.040000] apm: overridden by ACPI.
[17179618.632000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[17179618.632000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[17179618.632000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[17179619.040000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[17179619.044000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[17179619.044000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[17179619.296000] Bluetooth: Core ver 2.8
[17179619.296000] NET: Registered protocol family 31
[17179619.296000] Bluetooth: HCI device and connection manager initialized
[17179619.296000] Bluetooth: HCI socket layer initialized
[17179619.564000] Bluetooth: L2CAP ver 2.8
[17179619.564000] Bluetooth: L2CAP socket layer initialized
[17179619.612000] Bluetooth: RFCOMM socket layer initialized
[17179619.612000] Bluetooth: RFCOMM TTY layer initialized
[17179619.612000] Bluetooth: RFCOMM ver 1.7

ls -alR  /media/windows

/media/windows:
total 24
drwxr-xr-x 3 root root  4096 2006-06-20 09:51 .
drwxr-xr-x 6 root root  4096 2006-06-27 00:41 ..
drwx------ 2 root root 16384 2006-06-20 09:51 lost+found
ls: /media/windows/lost+found: Permission non accordée

df -mT  /media/windows

Sys. de fich. Type   1M-blocs       Occupé Disponible Capacité Monté sur
/dev/hdd1     ext3       18786       129     17704   1% /media/windows

il me dit que j ai pas les permissions necessaires quand j essaie de voir sur "lost+found". Si j ai utilisé Gpart, c est prce que je pensais que pour avoir les droits en ecriture sur une partition il fallait qu elle soit en ext3...:(

Hors ligne

#27 Le 28/06/2006, à 08:22

cep_

Re : installation d un deuxieme disque dur de donnees

Et bien ton disque est monté.

Maintenant pour avoir les droits sur ce disque :
sudo chown -R ton_user:ton_user /media/windows

Tu aurais du mettre dmesg entre les balises code smile

Bonne continuation.
cep

#28 Le 28/06/2006, à 08:34

kryss

Re : installation d un deuxieme disque dur de donnees

ah!
je peux enfin lire et ecrire sur mon disque.
par contre j avais des mp3 dessus et j arrive pas a les retrouver... il me dit qu il y a 17Go de libre et ca me parait un peu bizare... tu crois que les donnees ont disparues quand j ai utilisé Gparted?
et sinon merci pour tout cep_, c est vraiment sympa...

Hors ligne

#29 Le 28/06/2006, à 08:45

cep_

Re : installation d un deuxieme disque dur de donnees

De rien smile

ok pour gparted. Dans ton autre poste, tu disais avoir utilisé gpart, d'ou ma question.

Si tu as modifié le système de fichiers, tes données on disparu.
Voir d'ailleurs le résultat de df plus haut, qui donne l'espace libre et le % d'espace utilisé (espace réservé à root entre autre).

Bonne continuation.
cep

#30 Le 28/06/2006, à 08:48

kryss

Re : installation d un deuxieme disque dur de donnees

bah pas grave pour ma collection mp3...
j imagine que c etait un des sacrifices a faire pour me mettre sur ubuntu.
mais j en suis content maintenant
en tout cas merci encore!

Hors ligne