Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 27/08/2010, à 20:24

Shlipak

Problème avec X après une maj

Salut à tous!

J'ai lancé un upgrade de ma version d'Ubuntu (j'en étais à la version 9.04...), et X ne se lance plus au démarrage. J'ai comme erreur:

"nvidia module not found"

puis

"Fatal server error:
no screens found"

J'ai testé toutes les solutions trouvées sur google (dpkg -reconfigure -phigh xserver-corg, apt-get upgrade...) plus d'autres un peu plus..farfelue (comme remplacer le X11 de ma partition par celui d'un live CD), mais sans succès.

J'ai pas tellement envie de tout réinstaller, ayant passer pas mal de temps à configurer mon ancienne version...

Quelqu'un aurait-il une idée de solution?

Merci d'avance!

Hors ligne

#2 Le 27/08/2010, à 21:36

chopinhauer

Re : Problème avec X après une maj

Shlipak a écrit :

Quelqu'un aurait-il une idée de solution?

Installe le paquet nvidia-current:

sudo apt-get install nvidia-current

sinon bouge le fichier de configuration de X pour que les valeurs par défaut soient prises en compte:

sudo mv /etc/X11/xorg.conf{,.backup}

ou 'sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup' pour les moins paresseux.

Pensez à donner un bon titre à vos sujets : cela permettra d'aider d'autres utilisateurs dans votre même situation. Ce n'est pas qu'en donnant des solutions qu'on aide, mais aussi en posant des bonnes questions et… facilement trouvables.

Hors ligne

#3 Le 27/08/2010, à 21:50

Shlipak

Re : Problème avec X après une maj

Merci pour ta réponse!

sudo apt-get install nvidia-current:
Ca me donne une erreur "couln't find package"... J'ai pourtant fait un apt-get update.

sudo mv /etc/X11/xorg.conf{,.backup}:
Plus d'erreur, mais un bel écran noir quand je lance X.

Hors ligne

#4 Le 27/08/2010, à 22:05

chopinhauer

Re : Problème avec X après une maj

Shlipak a écrit :

Plus d'erreur, mais un bel écran noir quand je lance X.

Écran noir avec curseur, ou écran noir avec un pointeur de souris? En tout cas la fin du fichier /var/log/Xorg.0.log pourra t'en dire plus.

Pensez à donner un bon titre à vos sujets : cela permettra d'aider d'autres utilisateurs dans votre même situation. Ce n'est pas qu'en donnant des solutions qu'on aide, mais aussi en posant des bonnes questions et… facilement trouvables.

Hors ligne

#5 Le 27/08/2010, à 22:07

Shlipak

Re : Problème avec X après une maj

Ecran noir noir: ni curseur, ni prompt...Je vais regarder ce log.

Hors ligne

#6 Le 27/08/2010, à 22:57

Shlipak

Re : Problème avec X après une maj

Voici mon log:

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
Current Operating System: Linux adrien-linux 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686
Kernel command line: root=UUID=967c2879-456d-4ea5-b096-670df4db982e ro  single
Build Date: 06 May 2010  09:30:46PM
xorg-server 2:1.6.4-2ubuntu4.3 (buildd@)
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 27 21:43:39 2010
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 2

(--) PCI:*(0:1:0:0) 10de:0407:1028:01f1 nVidia Corporation G84 [GeForce 8600M GT] rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
    Section "Device"
        Identifier    "Builtin Default nv Device 0"
        Driver    "nv"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default nv Screen 0"
        Device    "Builtin Default nv Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default vesa Device 0"
        Driver    "vesa"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default vesa Screen 0"
        Device    "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default fbdev Device 0"
        Driver    "fbdev"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default fbdev Screen 0"
        Device    "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
        Identifier    "Builtin Default Layout"
        Screen    "Builtin Default nv Screen 0"
        Screen    "Builtin Default vesa Screen 0"
        Screen    "Builtin Default fbdev Screen 0"
    EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default nv Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default nv Device 0"
(==) No monitor specified for screen "Builtin Default nv Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
(II) NVIDIA GLX Module  185.18.36  Fri Aug 14 17:50:12 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.1.14
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.4.0
    ABI class: X.Org Video Driver, version 5.0
(II) NV: driver for NVIDIA chipsets:  RIVA 128,  RIVA TNT,  RIVA TNT2,
     RIVA TNT2 Ultra,  Unknown TNT2,  Vanta,  RIVA TNT2 Model 64,
     GeForce 6800 Ultra,  GeForce 6800,  GeForce 6800 LE,
     GeForce 6800 XE,  GeForce 6800 XT,  GeForce 6800 GT,
     GeForce 6800 GT,  GeForce 6800 GS,  GeForce 6800 XT,
     Quadro FX 4000,  GeForce 7800 GTX,  GeForce 7800 GTX,
     GeForce 7800 GT,  GeForce 7800 GS,  GeForce 7800 SLI,
     GeForce Go 7800,  GeForce Go 7800 GTX,  Quadro FX 4500,
     Aladdin TNT2,  GeForce 6800 GS,  GeForce 6800,  GeForce 6800 LE,
     GeForce 6800 XT,  GeForce Go 6800,  GeForce Go 6800 Ultra,
     Quadro FX Go1400,  Quadro FX 3450/4000 SDI,  Quadro FX 1400,
     GeForce 256,  GeForce DDR,  Quadro,  GeForce2 MX/MX 400,
     GeForce2 MX 100/200,  GeForce2 Go,  Quadro2 MXR/EX/Go,
     GeForce 6600 GT,  GeForce 6600,  GeForce 6600 LE,  GeForce 6600 VE,
     GeForce Go 6600,  GeForce 6610 XL,  GeForce Go 6600 TE/6200 TE,
     GeForce 6700 XL,  GeForce Go 6600,  GeForce Go 6600 GT,
     Quadro NVS 440,  Quadro FX 550,  Quadro FX 550,  Quadro FX 540,
     GeForce 6200,  GeForce2 GTS,  GeForce2 Ti,  GeForce2 Ultra,
     Quadro2 Pro,  GeForce 6500,  GeForce 6200 TurboCache(TM),
     GeForce 6200SE TurboCache(TM),  GeForce 6200 LE,  GeForce Go 6200,
     Quadro NVS 285,  GeForce Go 6400,  GeForce Go 6200,
     GeForce Go 6400,  GeForce 6250,  GeForce 7100 GS,  GeForce4 MX 460,
     GeForce4 MX 440,  GeForce4 MX 420,  GeForce4 MX 440-SE,
     GeForce4 440 Go,  GeForce4 420 Go,  GeForce4 420 Go 32M,
     GeForce4 460 Go,  Quadro4 550 XGL,  GeForce4 440 Go 64M,
     Quadro NVS,  Quadro4 500 GoGL,  GeForce4 410 Go 16M,
     GeForce4 MX 440 with AGP8X,  GeForce4 MX 440SE with AGP8X,
     GeForce4 MX 420 with AGP8X,  GeForce4 MX 4000,  GeForce4 448 Go,
     GeForce4 488 Go,  Quadro4 580 XGL,  Quadro4 NVS 280 SD,
     Quadro4 380 XGL,  Quadro NVS 50 PCI,  GeForce4 448 Go,
     GeForce 8800 GTX,  GeForce 8800 GTS,  GeForce 8800 Ultra,
     Quadro FX 5600,  Quadro FX 4600,  GeForce2 Integrated GPU,
     GeForce 7350 LE,  GeForce 7300 LE,  GeForce 7300 SE,
     GeForce Go 7200,  GeForce Go 7300,  GeForce Go 7400,
     GeForce Go 7400 GS,  Quadro NVS 110M,  Quadro NVS 120M,
     Quadro FX 350M,  GeForce 7500 LE,  Quadro FX 350,  GeForce 7300 GS,
     GeForce4 MX Integrated GPU,  GeForce3,  GeForce3 Ti 200,
     GeForce3 Ti 500,  Quadro DCC,  GeForce 6800,  GeForce 6800 LE,
     GeForce 6800 GT,  GeForce 6800 XT,  GeForce 6200,
     GeForce 6200 A-LE,  GeForce 6150,  GeForce 6150 LE,  GeForce 6100,
     GeForce Go 6150,  Quadro NVS 210S / NVIDIA GeForce 6150LE,
     GeForce Go 6100,  GeForce4 Ti 4600,  GeForce4 Ti 4400,
     GeForce4 Ti 4200,  Quadro4 900 XGL,  Quadro4 750 XGL,
     Quadro4 700 XGL,  GeForce4 Ti 4800,  GeForce4 Ti 4200 with AGP8X,
     GeForce4 Ti 4800 SE,  GeForce4 4200 Go,  Quadro4 980 XGL,
     Quadro4 780 XGL,  Quadro4 700 GoGL,  GeForce 7900 GTX,
     GeForce 7900 GT,  GeForce 7900 GS,  GeForce 7950 GX2,
     GeForce 7950 GX2,  GeForce 7950 GT},  GeForce Go 7950 GTX,
     GeForce Go 7900 GS,  GeForce Go 7900 GTX,  Quadro FX 2500M,
     Quadro FX 1500M,  Quadro FX 5500,  Quadro FX 3500,  Quadro FX 1500,
     Quadro FX 4500 X2,  GeForce FX 5800 Ultra,  GeForce FX 5800,
     Quadro FX 2000,  Quadro FX 1000,  GeForce FX 5600 Ultra,
     GeForce FX 5600,  GeForce FX 560T,  GeForce FX Go5600,
     GeForce FX Go5650,  Quadro FX Go700,  GeForce FX 5200,
     GeForce FX 5200 Ultra,  GeForce FX 5200,  GeForce FX 5200LE,
     GeForce FX Go5200,  GeForce FX Go5250,  GeForce FX 5500,
     GeForce FX 5100,  GeForce FX Go5200 32M/64M,  Quadro NVS 55/280 PCI,
     Quadro FX 500/600 PCI,  GeForce FX Go53xx Series,
     GeForce FX Go5100,  GeForce FX 5900 Ultra,  GeForce FX 5900,
     GeForce FX 590T,  GeForce FX 5950 Ultra,  GeForce FX 5900ZT,
     Quadro FX 3000,  Quadro FX 700,  GeForce FX 5700 Ultra,
     GeForce FX 5700,  GeForce FX 5700LE,  GeForce FX 5700VE,
     GeForce FX Go5700,  GeForce FX Go5700,  Quadro FX Go1000,
     Quadro FX 1100,  GeForce 7650 GS,  GeForce 7600 GT,
     GeForce 7600 GS,  GeForce 7300 GT,  GeForce 7600 LE,
     GeForce 7300 GT,  GeForce Go 7700,  GeForce Go 7600,
     GeForce Go 7600 GT},  Quadro NVS 300M,  GeForce Go 7900 SE,
     Quadro FX 550M,  Quadro FX 560,  GeForce 6150SE,
     GeForce 6100 nForce 405,  GeForce 6100 nForce 400,
     GeForce 6100 nForce 420,  GeForce 8600 GTS,  GeForce 8600 GT,
     GeForce 8600 GT,  GeForce 8600 GS,  GeForce 8400 GS,
     GeForce 9500M GS,  GeForce 8600M GT,  GeForce 9650M GS,
     GeForce 8700M GT,  Quadro FX 370,  Quadro NVS 320M,  Quadro FX 570M,
     Quadro FX 1600M,  Quadro FX 570,  Quadro FX 1700,  GeForce 8400 SE,
     GeForce 8500 GT,  GeForce 8400 GS,  GeForce 8300 GS,
     GeForce 8400 GS,  GeForce 8600M GS,  GeForce 8400M GT,
     GeForce 8400M GS,  GeForce 8400M G,  Quadro NVS 140M,
     Quadro NVS 130M,  Quadro NVS 135M,  GeForce 9400 GT,
     Quadro FX 360M,  GeForce 9300M G,  Quadro NVS 290,  GeForce GTX 295,
     GeForce GTX 280,  GeForce GTX 260,  GeForce GTX 285,  GeForce 7050,
     GeForce 7025,  Quadro CX,  Quadro FX 5800,  Quadro FX 4800,
     Quadro FX 3800,  GeForce 8800 GTS 512,  GeForce 9800 GT,
     GeForce 8800 GT,  GeForce 9800 GX2,  GeForce 9800 GT,
     GeForce 8800 GS,  GeForce 9800M GTX,  GeForce 8800M GTS,
     GeForce 9800M GT,  GeForce 8800M GTX,  GeForce 8800 GS,
     GeForce 9600 GSO,  GeForce 8800 GT,  GeForce 9800 GTX,
     GeForce 9800 GTX+,  GeForce 9800 GT,  GeForce GTS 250,
     GeForce 9800M GTX,  Quadro FX 3700,  Quadro FX 3600M,
     Quadro FX 3700M,  GeForce 9600 GT,  GeForce 9600 GS,
     GeForce 9600 GSO 512,  GeForce GT 130,  GeForce GT 140,
     GeForce 9800M GTS,  GeForce 9700M GTS,  GeForce 9800M GS,
     GeForce 9800M GTS,  Quadro FX 1800,  Quadro FX 2700M,
     GeForce 9500 GT,  GeForce 9400 GT,  GeForce 9500 GT,
     GeForce GT 120,  GeForce 9600M GT,  GeForce 9600M GS,
     GeForce 9600M GT,  GeForce 9700M GT,  GeForce 9500M G,
     GeForce 9650M GT,  GeForce 9500 GT,  Quadro FX 380,  Quadro FX 580,
     Quadro FX 770M,  GeForce 9300 GE,  GeForce 9300 GS,
     GeForce 8400 GS,  GeForce 9300M GS,  GeForce G100,
     GeForce 9200M GS,  GeForce 9300M GS,  Quadro NVS 150M,
     Quadro NVS 160M,  Quadro NVS 420,  Quadro FX 370 LP,
     Quadro NVS 450,  Quadro NVS 295
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01@00:00:0
(--) NV: Found NVIDIA  GeForce 8600M GT at 01@00:00:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 0.0.2
    ABI class: X.Org Video Driver, version 5.0
(EE) open /dev/fb0: No such file or directory
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Console is VGA mode 0x3
(II) NV(0): Creating default Display subsection in Screen section
    "Builtin Default nv Screen 0" for depth/fbbpp 24/32
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using hardware cursor
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): MMIO registers mapped at 0xb598f000
(--) NV(0): Total video RAM: 256.0 MB
(--) NV(0):       BAR1 size: 256.0 MB
(--) NV(0):   Mapped memory: 255.0 MB
(II) NV(0): Linear framebuffer mapped at 0xa5a8f000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) NV(0): Connector map:
(--) NV(0):   Bus 3 -> SOR0 (LVDS)
(--) NV(0):   Bus 0 -> DAC1
(--) NV(0): Load detection: 279
(II) NV(0): I2C bus "I2C0" initialized.
(II) NV(0): Output VGA1 has no monitor section
(II) NV(0): LVDS native size 1280x800
(II) NV(0): Output LVDS has no monitor section
(II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
(II) NV(0): Probing for EDID on I2C bus 0...
(II) NV(0): I2C device "I2C0:E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
(II) NV(0):   ... none found
(--) NV(0): Trying load detection on VGA1 ... nothing.
(II) NV(0): EDID for output VGA1
(II) NV(0): Probing for EDID on I2C bus 3...
(II) NV(0): I2C device "I2C3 (LVDS):E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: LPL  Model: 301  Serial#: 0
(II) NV(0): Year: 2007  Week: 0
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) NV(0): Gamma: 2.20
(II) NV(0): No DPMS capabilities specified
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.600 redY: 0.351   greenX: 0.324 greenY: 0.554
(II) NV(0): blueX: 0.153 blueY: 0.145   whiteX: 0.312 whiteY: 0.328
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 72.2 MHz   Image Size:  331 x 207 mm
(II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1464 h_border: 0
(II) NV(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 72.2 MHz   Image Size:  331 x 207 mm
(II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1464 h_border: 0
(II) NV(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
(II) NV(0):  XU235154W01
(II) NV(0):  $2=Eh‹§ÿ
(II) NV(0): EDID (in hex):
(II) NV(0):     00ffffffffffff00320c010300000000
(II) NV(0):     00110103802115780ab3409959538d27
(II) NV(0):     25505400000001010101010101010101
(II) NV(0):     010101010101391c00b8502017303020
(II) NV(0):     36004bcf10000019391c00b850201730
(II) NV(0):     302036004bcf10000000000000fe0058
(II) NV(0):     55323335813135345730310a000000fe
(II) NV(0):     0024323d45688ba7ff01010a202000d4
(II) NV(0): EDID for output LVDS
(II) NV(0): Manufacturer: LPL  Model: 301  Serial#: 0
(II) NV(0): Year: 2007  Week: 0
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) NV(0): Gamma: 2.20
(II) NV(0): No DPMS capabilities specified
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.600 redY: 0.351   greenX: 0.324 greenY: 0.554
(II) NV(0): blueX: 0.153 blueY: 0.145   whiteX: 0.312 whiteY: 0.328
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 72.2 MHz   Image Size:  331 x 207 mm
(II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1464 h_border: 0
(II) NV(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 72.2 MHz   Image Size:  331 x 207 mm
(II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1464 h_border: 0
(II) NV(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
(II) NV(0):  XU235154W01
(II) NV(0):  $2=Eh‹§ÿ
(II) NV(0): EDID (in hex):
(II) NV(0):     00ffffffffffff00320c010300000000
(II) NV(0):     00110103802115780ab3409959538d27
(II) NV(0):     25505400000001010101010101010101
(II) NV(0):     010101010101391c00b8502017303020
(II) NV(0):     36004bcf10000019391c00b850201730
(II) NV(0):     302036004bcf10000000000000fe0058
(II) NV(0):     55323335813135345730310a000000fe
(II) NV(0):     0024323d45688ba7ff01010a202000d4
(II) NV(0): EDID vendor "LPL", prod id 769
(II) NV(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
(II) NV(0): Printing probed modes for output LVDS
(II) NV(0): Modeline "1280x800"x60.0   72.25  1280 1328 1360 1464  800 803 809 823 -hsync -vsync (49.4 kHz)
(II) NV(0): Output VGA1 disconnected
(II) NV(0): Output LVDS connected
(II) NV(0): Using exact sizes for initial modes
(II) NV(0): Output LVDS using initial mode 1280x800
(--) NV(0): Virtual size is 1280x1280 (pitch 1280)
(**) NV(0):  Driver mode "1280x800": 72.2 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x800"x60.0   72.25  1280 1328 1360 1464  800 803 809 823 -hsync -vsync (49.4 kHz)
(==) NV(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(--) NV(0): 153.75 MB available for offscreen pixmaps
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
        32 128x128 slots
        32 256x256 slots
        16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(II) NV(0): DPMS enabled
(II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
(II) NV(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device Microsoft  Compact Optical Mouse 500
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) Microsoft  Compact Optical Mouse 500: always reports core events
(**) Microsoft  Compact Optical Mouse 500: Device: "/dev/event2"
(II) Microsoft  Compact Optical Mouse 500: Found 3 mouse buttons
(II) Microsoft  Compact Optical Mouse 500: Found x and y relative axes
(II) Microsoft  Compact Optical Mouse 500: Found scroll wheel(s)
(II) Microsoft  Compact Optical Mouse 500: Configuring as mouse
(**) Microsoft  Compact Optical Mouse 500: YAxisMapping: buttons 4 and 5
(**) Microsoft  Compact Optical Mouse 500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft  Compact Optical Mouse 500" (type: MOUSE)
(**) Microsoft  Compact Optical Mouse 500: (accel) keeping acceleration scheme 1
(**) Microsoft  Compact Optical Mouse 500: (accel) filter chain progression: 2.00
(**) Microsoft  Compact Optical Mouse 500: (accel) filter stage 0: 20.00 ms
(**) Microsoft  Compact Optical Mouse 500: (accel) set acceleration profile 0
(II) Microsoft  Compact Optical Mouse 500: initialized for relative axes.
(II) config/hal: Adding input device Broadcom Corp
(**) Broadcom Corp: always reports core events
(**) Broadcom Corp: Device: "/dev/event3"
(II) Broadcom Corp: Found keys
(II) Broadcom Corp: Configuring as keyboard
(II) XINPUT: Adding extended input device "Broadcom Corp" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/event9"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Sleep Button (CM)
(**) Sleep Button (CM): always reports core events
(**) Sleep Button (CM): Device: "/dev/event7"
(II) Sleep Button (CM): Found keys
(II) Sleep Button (CM): Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button (CM)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Power Button (CM)
(**) Power Button (CM): always reports core events
(**) Power Button (CM): Device: "/dev/event6"
(II) Power Button (CM): Found keys
(II) Power Button (CM): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/event10"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.1.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
SynPS/2 Synaptics TouchPad The /dev/input/event* device nodes seem to be missing
(**) Option "Device" "/dev/event12"
Query no Synaptics: 000000
(--) SynPS/2 Synaptics TouchPad: no supported touchpad found
(EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
(II) UnloadModule: "synaptics"
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Broadcom Corp
(**) Broadcom Corp: always reports core events
(**) Broadcom Corp: Device: "/dev/event4"
(II) Broadcom Corp: Found 3 mouse buttons
(II) Broadcom Corp: Found x and y relative axes
(II) Broadcom Corp: Configuring as mouse
(**) Broadcom Corp: YAxisMapping: buttons 4 and 5
(**) Broadcom Corp: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Broadcom Corp" (type: MOUSE)
(**) Broadcom Corp: (accel) keeping acceleration scheme 1
(**) Broadcom Corp: (accel) filter chain progression: 2.00
(**) Broadcom Corp: (accel) filter stage 0: 20.00 ms
(**) Broadcom Corp: (accel) set acceleration profile 0
(II) Broadcom Corp: initialized for relative axes.

Hors ligne

#7 Le 27/08/2010, à 23:20

chopinhauer

Re : Problème avec X après une maj

Tu dois avoir ton pilote NVidia installé à moitié. Est-ce que t'as activé le dépôt restricted? Dans le fichier /etc/apt/sources.list tu devrais avoir une ligne comme:

deb http://ftp.crihan.fr/ubuntu/ lucid main restricted

Après un 'apt-get update' tu devrais pouvoir installer 'nvidia-current'.

Pensez à donner un bon titre à vos sujets : cela permettra d'aider d'autres utilisateurs dans votre même situation. Ce n'est pas qu'en donnant des solutions qu'on aide, mais aussi en posant des bonnes questions et… facilement trouvables.

Hors ligne

#8 Le 28/08/2010, à 01:16

Shlipak

Re : Problème avec X après une maj

J'ai pu installer nvidia-current après l'ajout de cette ligne, mais ça me fait toujours la même erreur. J'ai donc mis à jour tout le système, mais sans succès. je ne sais vraiment plus trop quoi faire...

Hors ligne

Pages : 1