Pages : 1
#1 Le 25/09/2010, à 18:27
- jee-el
modem 56k trendnet/agere system
bonjour les pros!
impossible d'activer ce modem TFM-560 U sur prise USB malgré les tutos suivis...
grrr!
une liste de pilote sympa est sous
http://forum.ubuntu-fr.org/viewtopic.php?pid=2805490
mais c'est pour ADSL, pas 56K
sur le site officiel de trendnet, il y a incompatibilité avec GNU/Linux. mais des pilotes standards, ça existe peut-être.
il y a une base "Lucent"
d'autant que
ls sub
me donne
Bus 001 Device 004: ID 047e:2892 Agere Systems, Inc. (Lucent) Systems Soft Modem
une piste?
merci d'avance
jee-el, Grand-Père Plex!
C-mère Gigabyte H87-HD3
C Graphique NVIDIA GTX 760
multiboot Ubuntu-Voyager 20.04 64bits / Win10-2004
Hors ligne
#3 Le 26/09/2010, à 14:58
- jee-el
Re : modem 56k trendnet/agere system
bonjour guy!
scan mode chargé hier et effectué me donne pour "scan out":
bus=001
SLOT="Bus 001 Device 004:"
NAME="Agere Systems, Inc. (Lucent) Systems Soft Modem"
USBmodemID=047e:2892
IDENT=agrsm
Driver=agrsm
te le problème justement , c'est que jusque là je me heurte à cette phrase sur le site évoqué
http://linmodems.technion.ac.il/resources.html#lucent :
Modems based on Lucent/Agere digital signal processing (DSP) chipsets [b](but NOT Agere soft modems[/b]).
but not for soft modem...
avec mes meilleures salutations!
jee-el, Grand-Père Plex!
C-mère Gigabyte H87-HD3
C Graphique NVIDIA GTX 760
multiboot Ubuntu-Voyager 20.04 64bits / Win10-2004
Hors ligne
#4 Le 26/09/2010, à 18:08
- gl38
Re : modem 56k trendnet/agere system
Il semble quand même que scanmodem dit d'utiliser le driver agrsm et qu'il y en a sur le site de linmodem : ça ne coûte pas grand chose d'essayer !
Cordialement,
Guy
Hors ligne
#5 Le 02/10/2010, à 05:47
- jee-el
Re : modem 56k trendnet/agere system
bonjour guy!
j'ai récupéré ce qui semblait possible, le agrsm-11c11040-, mais le modem n'est pas détecté par G-PPP malgré ça, ce qui correspond à ce que j'ai pu lire jusque là.. le drame c'est que je maîtrise pas vraiment les tuto en anglais... ce qui n'aide pas non plus
ben on va continuer de zapper sur XP en faisant des essais de temps en temps!
merci en tout cas!
jee-el, Grand-Père Plex!
C-mère Gigabyte H87-HD3
C Graphique NVIDIA GTX 760
multiboot Ubuntu-Voyager 20.04 64bits / Win10-2004
Hors ligne
#6 Le 02/10/2010, à 11:52
- gl38
Re : modem 56k trendnet/agere system
Dans cette page, tu en es où ?
Note bien, qu'il y a des choses à faire avec ALSA, sinon on a le modem qui marche mais on a perdu le son, ce qui est agaçant, juste pour entendre des crachouillis quand on se branche !
Pour ce qui concerne gppp, ce n'est pas évident de le faire fonctionner, mais comme wvdial marche parfaitement, j'ai laissé tomber.
Cordialement,
Guy
Hors ligne
#7 Le 02/10/2010, à 16:22
- jee-el
Re : modem 56k trendnet/agere system
je bute déjà au pt 2. je n'ai pas le fichier" /hda_codec.c" dans le dossier hda. seulement un fichier "Makefile" et "Kconfig"
Kconfig :
menuconfig SND_HDA_INTEL
tristate "Intel HD Audio"
select SND_PCM
select SND_VMASTER
help
Say Y here to include support for Intel "High Definition
Audio" (Azalia) and its compatible devices.
This option enables the HD-audio controller. Don't forget
to choose the appropriate codec options below.
To compile this driver as a module, choose M here: the module
will be called snd-hda-intel.
if SND_HDA_INTEL
config SND_HDA_HWDEP
bool "Build hwdep interface for HD-audio driver"
select SND_HWDEP
help
Say Y here to build a hwdep interface for HD-audio driver.
This interface can be used for out-of-band communication
with codecs for debugging purposes.
config SND_HDA_RECONFIG
bool "Allow dynamic codec reconfiguration (EXPERIMENTAL)"
depends on SND_HDA_HWDEP && EXPERIMENTAL
help
Say Y here to enable the HD-audio codec re-configuration feature.
This adds the sysfs interfaces to allow user to clear the whole
codec configuration, change the codec setup, add extra verbs,
and re-configure the codec dynamically.
config SND_HDA_INPUT_BEEP
bool "Support digital beep via input layer"
depends on INPUT=y || INPUT=SND_HDA_INTEL
help
Say Y here to build a digital beep interface for HD-audio
driver. This interface is used to generate digital beeps.
config SND_HDA_INPUT_JACK
bool "Support jack plugging notification via input layer"
depends on INPUT=y || INPUT=SND_HDA_INTEL
select SND_JACK
help
Say Y here to enable the jack plugging notification via
input layer.
config SND_HDA_PATCH_LOADER
bool "Support initialization patch loading for HD-audio"
depends on EXPERIMENTAL
select FW_LOADER
select SND_HDA_HWDEP
select SND_HDA_RECONFIG
help
Say Y here to allow the HD-audio driver to load a pseudo
firmware file ("patch") for overriding the BIOS setup at
start up. The "patch" file can be specified via patch module
option, such as patch=hda-init.
This option turns on hwdep and reconfig features automatically.
config SND_HDA_CODEC_REALTEK
bool "Build Realtek HD-audio codec support"
default y
help
Say Y here to include Realtek HD-audio codec support in
snd-hda-intel driver, such as ALC880.
When the HD-audio driver is built as a module, the codec
support code is also built as another module,
snd-hda-codec-realtek.
This module is automatically loaded at probing.
config SND_HDA_CODEC_ANALOG
bool "Build Analog Device HD-audio codec support"
default y
help
Say Y here to include Analog Device HD-audio codec support in
snd-hda-intel driver, such as AD1986A.
When the HD-audio driver is built as a module, the codec
support code is also built as another module,
snd-hda-codec-analog.
This module is automatically loaded at probing.
config SND_HDA_CODEC_SIGMATEL
bool "Build IDT/Sigmatel HD-audio codec support"
default y
help
Say Y here to include IDT (Sigmatel) HD-audio codec support in
snd-hda-intel driver, such as STAC9200.
When the HD-audio driver is built as a module, the codec
support code is also built as another module,
snd-hda-codec-idt.
This module is automatically loaded at probing.
config SND_HDA_CODEC_VIA
bool "Build VIA HD-audio codec support"
default y
help
Say Y here to include VIA HD-audio codec support in
snd-hda-intel driver, such as VT1708.
When the HD-audio driver is built as a module, the codec
support code is also built as another module,
snd-hda-codec-via.
This module is automatically loaded at probing.
config SND_HDA_CODEC_ATIHDMI
bool "Build ATI HDMI HD-audio codec support"
default y
help
Say Y here to include ATI HDMI HD-audio codec support in
snd-hda-intel driver, such as ATI RS600 HDMI.
When the HD-audio driver is built as a module, the codec
support code is also built as another module,
snd-hda-codec-atihdmi.
This module is automatically loaded at probing.
config SND_HDA_CODEC_NVHDMI
bool "Build NVIDIA HDMI HD-audio codec support"
default y
help
Say Y here to include NVIDIA HDMI HD-audio codec support in
snd-hda-intel driver, such as NVIDIA MCP78 HDMI.
When the HD-audio driver is built as a module, the codec
support code is also built as another module,
snd-hda-codec-nvhdmi.
This module is automatically loaded at probing.
config SND_HDA_CODEC_INTELHDMI
bool "Build INTEL HDMI HD-audio codec support"
default y
help
Say Y here to include INTEL HDMI HD-audio codec support in
snd-hda-intel driver, such as Eaglelake integrated HDMI.
When the HD-audio driver is built as a module, the codec
support code is also built as another module,
snd-hda-codec-intelhdmi.
This module is automatically loaded at probing.
config SND_HDA_ELD
def_bool y
depends on SND_HDA_CODEC_INTELHDMI
config SND_HDA_CODEC_CIRRUS
bool "Build Cirrus Logic codec support"
depends on SND_HDA_INTEL
default y
help
Say Y here to include Cirrus Logic codec support in
snd-hda-intel driver, such as CS4206.
When the HD-audio driver is built as a module, the codec
support code is also built as another module,
snd-hda-codec-cirrus.
This module is automatically loaded at probing.
config SND_HDA_CODEC_CONEXANT
bool "Build Conexant HD-audio codec support"
default y
help
Say Y here to include Conexant HD-audio codec support in
snd-hda-intel driver, such as CX20549.
When the HD-audio driver is built as a module, the codec
support code is also built as another module,
snd-hda-codec-conexant.
This module is automatically loaded at probing.
config SND_HDA_CODEC_CA0110
bool "Build Creative CA0110-IBG codec support"
depends on SND_HDA_INTEL
default y
help
Say Y here to include Creative CA0110-IBG codec support in
snd-hda-intel driver, found on some Creative X-Fi cards.
When the HD-audio driver is built as a module, the codec
support code is also built as another module,
snd-hda-codec-ca0110.
This module is automatically loaded at probing.
config SND_HDA_CODEC_CMEDIA
bool "Build C-Media HD-audio codec support"
default y
help
Say Y here to include C-Media HD-audio codec support in
snd-hda-intel driver, such as CMI9880.
When the HD-audio driver is built as a module, the codec
support code is also built as another module,
snd-hda-codec-cmedia.
This module is automatically loaded at probing.
config SND_HDA_CODEC_SI3054
bool "Build Silicon Labs 3054 HD-modem codec support"
default y
help
Say Y here to include Silicon Labs 3054 HD-modem codec
(and compatibles) support in snd-hda-intel driver.
When the HD-audio driver is built as a module, the codec
support code is also built as another module,
snd-hda-codec-si3054.
This module is automatically loaded at probing.
config SND_HDA_GENERIC
bool "Enable generic HD-audio codec parser"
default y
help
Say Y here to enable the generic HD-audio codec parser
in snd-hda-intel driver.
config SND_HDA_POWER_SAVE
bool "Aggressive power-saving on HD-audio"
help
Say Y here to enable more aggressive power-saving mode on
HD-audio driver. The power-saving timeout can be configured
via power_save option or over sysfs on-the-fly.
config SND_HDA_POWER_SAVE_DEFAULT
int "Default time-out for HD-audio power-save mode"
depends on SND_HDA_POWER_SAVE
default 0
help
The default time-out value in seconds for HD-audio automatic
power-save mode. 0 means to disable the power-save mode.
endif
Makefile:
snd-hda-intel-objs := hda_intel.o
snd-hda-codec-y := hda_codec.o
snd-hda-codec-$(CONFIG_SND_HDA_GENERIC) += hda_generic.o
snd-hda-codec-$(CONFIG_PROC_FS) += hda_proc.o
# snd-hda-codec-$(CONFIG_SND_HDA_ELD) += hda_eld.o
snd-hda-codec-$(CONFIG_SND_HDA_HWDEP) += hda_hwdep.o
snd-hda-codec-$(CONFIG_SND_HDA_INPUT_BEEP) += hda_beep.o
snd-hda-codec-realtek-objs := patch_realtek.o
snd-hda-codec-cmedia-objs := patch_cmedia.o
snd-hda-codec-analog-objs := patch_analog.o
snd-hda-codec-idt-objs := patch_sigmatel.o
snd-hda-codec-si3054-objs := patch_si3054.o
snd-hda-codec-atihdmi-objs := patch_atihdmi.o
snd-hda-codec-cirrus-objs := patch_cirrus.o
snd-hda-codec-ca0110-objs := patch_ca0110.o
snd-hda-codec-conexant-objs := patch_conexant.o
snd-hda-codec-via-objs := patch_via.o
snd-hda-codec-nvhdmi-objs := patch_nvhdmi.o
snd-hda-codec-intelhdmi-objs := patch_intelhdmi.o hda_eld.o
# common driver
obj-$(CONFIG_SND_HDA_INTEL) := snd-hda-codec.o
# codec drivers (note: CONFIG_SND_HDA_CODEC_XXX are booleans)
ifdef CONFIG_SND_HDA_CODEC_REALTEK
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-realtek.o
endif
ifdef CONFIG_SND_HDA_CODEC_CMEDIA
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-cmedia.o
endif
ifdef CONFIG_SND_HDA_CODEC_ANALOG
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-analog.o
endif
ifdef CONFIG_SND_HDA_CODEC_SIGMATEL
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-idt.o
endif
ifdef CONFIG_SND_HDA_CODEC_SI3054
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-si3054.o
endif
ifdef CONFIG_SND_HDA_CODEC_ATIHDMI
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-atihdmi.o
endif
ifdef CONFIG_SND_HDA_CODEC_CIRRUS
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-cirrus.o
endif
ifdef CONFIG_SND_HDA_CODEC_CA0110
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-ca0110.o
endif
ifdef CONFIG_SND_HDA_CODEC_CONEXANT
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-conexant.o
endif
ifdef CONFIG_SND_HDA_CODEC_VIA
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-via.o
endif
ifdef CONFIG_SND_HDA_CODEC_NVHDMI
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-nvhdmi.o
endif
ifdef CONFIG_SND_HDA_CODEC_INTELHDMI
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-intelhdmi.o
endif
# this must be the last entry after codec drivers;
# otherwise the codec patches won't be hooked before the PCI probe
# when built in kernel
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-intel.o
ah lala!
jee-el, Grand-Père Plex!
C-mère Gigabyte H87-HD3
C Graphique NVIDIA GTX 760
multiboot Ubuntu-Voyager 20.04 64bits / Win10-2004
Hors ligne
#8 Le 03/10/2010, à 08:27
- gl38
Re : modem 56k trendnet/agere system
Le fichier hda_codec.c est dans la paquet linux-source de la version de ton noyau. Le paquet contient les sources pour recompiler le noyau et les modules, c'est gros, 63 Mo dans mon cas.
Cordialement,
Guy
Hors ligne
#9 Le 03/10/2010, à 18:02
- jee-el
Re : modem 56k trendnet/agere system
du hda_codec.h, oui, mais ça fait qu'une poignée de ko
jlm@jlm-desktop:~$ whereis hda_codec
hda_codec: /usr/src/agrsm-11c11040-2.1.80/hda_codec.h
mais une recherche via nautilus fait choux blanc relativement hda_codec.c dans "système de fichier" et précisément dans
/usr/src/linux-header-2.6.32-25
quid?
jee-el, Grand-Père Plex!
C-mère Gigabyte H87-HD3
C Graphique NVIDIA GTX 760
multiboot Ubuntu-Voyager 20.04 64bits / Win10-2004
Hors ligne
#10 Le 03/10/2010, à 21:46
- gl38
Re : modem 56k trendnet/agere system
Pour avoir hda_codec.c il faut installer le paquet des sources linux-source-2.6???
où les ? correspondent à ton noyau. Çà va copier dans /usr/src un gros fichier du genre
linux-source-2.6.31.tar.bz2
on peut voir qu'il y a ce qu'on cherche dedans avec
tar jtvf linux-source-2.6.31.tar.bz2 | grep hda_codec
et déployer l'archive sur le disque avec
tar jxvf linux-source-2.6.31.tar.bz2
en étant pour les deux commandes dans /usr/src pour que tar ait une chance de trouver l'archive.
On peut alors faire le point 2 !! et passer au point suivant...
C'est vrai que c'est mieux quand le module arrive tout compilé, prêt à l'emploi.
Cordialement,
Guy
Hors ligne
#11 Le 06/10/2010, à 17:46
- jee-el
Re : modem 56k trendnet/agere system
BON!
quelle patience, guy!
on continue
root@jlm-desktop:/home/jlm# tar jxvf linux-source-2.6.31.tar.bz2
tar: linux-source-2.6.31.tar.bz2 : la fonction open a échoué: Aucun fichier ou dossier de ce type
tar: Erreur non récupérable : arrêt du traitement
tar: Child returned status 2
tar: Arrêt avec code d'échec à cause des erreurs précédentes
et pourtant ce .tar.bz2 est bien dans /usr/src
j'ai essayé un autre moyen
root@jlm-desktop:/home/jlm# sudo cp -r '/usr/src/linux-source-2.6.32.tar.bz2'
cp: opérande du fichier cible manquant après «/usr/src/linux-source-2.6.32.tar.bz2»
Saisissez « cp --help » pour plus d'informations.
ce que j'ai fait, mais je peine. est-ce là ce qu'il faut ajouter?
Par défaut, les fichiers SOURCES dispersés sont détectés par le biais
d'une heuristique grossière et le fichier CIBLE correspondant est aussi
construit de façon dispersée. Il s'agit d'un comportement sélectionné
par l'option --sparse=auto. Spécifiez --sparse=always pour créer un fichier
CIBLE dispersé lorsque le fichier SOURCE contient une assez longue séquence
d'octets de valeur zéro.
Utilisez [b]--sparse=never[/b] pour inhiber la création de fichiers dispersés.
jee-el, Grand-Père Plex!
C-mère Gigabyte H87-HD3
C Graphique NVIDIA GTX 760
multiboot Ubuntu-Voyager 20.04 64bits / Win10-2004
Hors ligne
#12 Le 06/10/2010, à 17:48
- jee-el
Re : modem 56k trendnet/agere system
" --sparse=never" je voulais le mettre en gras via B comme bold...
jee-el, Grand-Père Plex!
C-mère Gigabyte H87-HD3
C Graphique NVIDIA GTX 760
multiboot Ubuntu-Voyager 20.04 64bits / Win10-2004
Hors ligne
#13 Le 06/10/2010, à 18:48
- gl38
Re : modem 56k trendnet/agere system
Avant de faire le tar jxvf...
il faut aller dans le dossier où le fichier par
cd /usr/src
Cordialement,
Guy
Hors ligne
#14 Le 07/10/2010, à 20:09
- jee-el
Re : modem 56k trendnet/agere system
bonsoir guy!
ben ça change rien...
root@jlm-desktop:/home/jlm# cd /usr/src
root@jlm-desktop:/usr/src# tar jxvf linux-source-2.6.31.tar.bz2
tar: linux-source-2.6.31.tar.bz2 : la fonction open a échoué: Aucun fichier ou dossier de ce type
tar: Erreur non récupérable : arrêt du traitement
tar: Child returned status 2
tar: Arrêt avec code d'échec à cause des erreurs précédentes
root@jlm-desktop:/usr/src#
j'aborde la chose différemment:
root@jlm-desktop:/usr/src# tar jxvf '/usr/src/linux-source-2.6.32.tar.bz2'
résultat, avec "enter", le gest d'archive s'ouvre, j'essaie d'extraire depuis là, mais me heurte à l'impossibilité "non root". je ferme ces stupides fenêtres, réentre "enter" dans le terminal et
miracle, une ribambelle de ligne apparaît. dans nautilus, le fichier source est là!!!
y compris hda_codec.c
j'apprends un tas de chose, merci guy!
jee-el, Grand-Père Plex!
C-mère Gigabyte H87-HD3
C Graphique NVIDIA GTX 760
multiboot Ubuntu-Voyager 20.04 64bits / Win10-2004
Hors ligne
#15 Le 07/10/2010, à 20:32
- jee-el
Re : modem 56k trendnet/agere system
ensuite, pour suivre la page HOWTO agrsm point 2, j'ai fait ceci sur une copie du hda_codec.c (pour pas faire de bêtise)
...
#include "hda_local.h"
#include <sound/hda_hwdep.h>
EXPORT_SYMBOL(snd_hda_codec_read)
EXPORT_SYMBOL(snd_hda_codec_write)
/*
* vendor / preset table
...
j'en reste là pour ce soir, c'est déjà une victoire!
merci guy!
jee-el, Grand-Père Plex!
C-mère Gigabyte H87-HD3
C Graphique NVIDIA GTX 760
multiboot Ubuntu-Voyager 20.04 64bits / Win10-2004
Hors ligne
Pages : 1