Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 10/11/2010, à 08:53

iAlexy

[AIDE] Problème de ventilateur avec Ubuntu 10.10

Bonjour à tous,
J'ai un petit problème assez gênant depuis que je suis passé à Karmic. Sur Ubuntu 10.04 LTS je n'avais pas ce problème. Enfaite, du démarrage jusqu'à l'extinction de mon PC le ventilateur tourne plein pot sans s'arrêter, c'est plutôt bruyant.
Sur Windows XP, je ne rencontre pas ce problème, et quand j'étais sur ubuntu 10.04, je n'avais pas ce problème aussi, mais depuis que j'ai mis la version 10.10, ca n'arrête pas. Auriez vous une solution ?

Merci d'avance, iAlexy smile

Hors ligne

#2 Le 10/11/2010, à 11:49

Climenole

Re : [AIDE] Problème de ventilateur avec Ubuntu 10.10

Salut iAlexy smile

Peut-être cet article pourrait de donner des pistes: Ubuntu: températures, ventilateurs et s.m.a.r.t. – comment faire

smile


Claude LaFrenière  :-)
Profil & Contact: http://www.google.com/profiles/climenole

Hors ligne

#3 Le 10/11/2010, à 14:56

pharos5588

Re : [AIDE] Problème de ventilateur avec Ubuntu 10.10

Bonjour j'ai le même problème tous mais ventilo tourne a fond et je n'arrive pas a les régler avec "pwmconfig", Je commence tous juste UBUNTU eet je ne suis pas très douer avec la  commande et avec l'anglais d'ailleurs.

Je vais donc vous mettre se que je fais si quelque peut m'aider sa serait cool.


Deja la commande sensors

lheveder@lheveder-MS-7309:~$ sensors
f71882fg-isa-0a00
Adapter: ISA adapter
+3.3V:       +3.46 V
in1:         +1.40 V  (max =  +2.04 V)   
in2:         +0.98 V
in3:         +0.96 V
in4:         +0.96 V
in5:         +1.11 V
in6:         +0.92 V
3VSB:        +3.46 V
Vbat:        +3.17 V
fan1:       2879 RPM
fan2:       1986 RPM
fan3:          0 RPM  ALARM
fan4:          0 RPM  ALARM
temp1:       +20.0°C  (high = +70.0°C, hyst = +66.0°C) 
                      (crit = +70.0°C, hyst = +66.0°C)  sensor = transistor
temp2:       +24.0°C  (high = +85.0°C, hyst = +81.0°C) 
                      (crit = +100.0°C, hyst = +96.0°C)  sensor = transistor
temp3:         FAULT  (high = +70.0°C, hyst = +68.0°C) 
                      (crit = +85.0°C, hyst = +83.0°C)  sensor = transistor

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:  +26.0°C                                   
Core1 Temp:  +26.0°C


Puis PWMCONFIG

lheveder@lheveder-MS-7309:~$ sudo pwmconfig
# pwmconfig revision 5770 (2009-09-16)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

Found the following devices:
   hwmon0/device is f71882fg
   hwmon1/device is k8temp

Found the following PWM controls:
   hwmon0/device/pwm1
   hwmon0/device/pwm2
hwmon0/device/pwm2 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) n
   hwmon0/device/pwm3
hwmon0/device/pwm3 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) n
   hwmon0/device/pwm4
hwmon0/device/pwm4 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) n

Giving the fans some time to reach full speed...
Found the following fan sensors:
   hwmon0/device/fan1_input     current speed: 2868 RPM
   hwmon0/device/fan2_input     current speed: 1976 RPM
   hwmon0/device/fan3_input     current speed: 0 ... skipping!
   hwmon0/device/fan4_input     current speed: 0 ... skipping!

Warning!!! This program will stop your fans, one at a time,
for approximately 5 seconds each!!!
This may cause your processor temperature to rise!!!
If you do not want to do this hit control-C now!!!
Hit return to continue:

Testing pwm control hwmon0/device/pwm1 ...
  hwmon0/device/fan1_input ... speed was 2868 now 2912
    no correlation
  hwmon0/device/fan2_input ... speed was 1976 now 1971
    no correlation

No correlations were detected.
There is either no fan connected to the output of hwmon0/device/pwm1,
or the connected fan has no rpm-signal connected to one of
the tested fan sensors. (Note: not all motherboards have
the pwm outputs connected to the fan connectors,
check out the hardware database on http://www.almico.com/forumindex.php)

Did you see/hear a fan stopping during the above test (n)? n

Testing is complete.
Please verify that all fans have returned to their normal speed.

The fancontrol script can automatically respond to temperature changes
of your system by changing fanspeeds.
Do you want to set up its configuration file now (y)? y
What should be the path to your fancontrol config file (/etc/fancontrol)?
Loading configuration from /etc/fancontrol ...

Select fan output to configure, or other action:
1) Change INTERVAL     3) Save and quit
2) Just quit           4) Show configuration
select (1-n):



Voila je fais surement une erreur toute bête mais si quelqu'un pouvait m'aider à calmer le turbo réacteur qui me sert de PC sa serait cool.


Merci d'avance

Hors ligne

#4 Le 10/11/2010, à 16:49

Climenole

Re : [AIDE] Problème de ventilateur avec Ubuntu 10.10

Salut pharos5588 smile

As-tu consulté l'article (en français) donné en lien dans le message précédent? hmm

Pour ce qui est des messages en anglais il y a bien ceci par exemple: Outils linguistiques Google...

smile


Claude LaFrenière  :-)
Profil & Contact: http://www.google.com/profiles/climenole

Hors ligne

#5 Le 11/11/2010, à 09:48

pharos5588

Re : [AIDE] Problème de ventilateur avec Ubuntu 10.10

Donc re bonjour. lol

J'ai essayer de suivre tes conseil et j' ai tous repris au début déjà avec la doc UBUNTU.


Donc comme préconisé j'ai éditer /etc/init.d/fanconttol avec le script proposer

Puis comme expliquer j'ai rendu le script exécutable puis j'ai redémarrez. comme rien ne se passé j'ai également éditer /etc/rc.local en rajoutant "/etc/init.d/fancontrol start"


Toujours rien j'ai donc relancé pwmconfig dans la consol avec mon petit traducteur d'anglais.

Et la il m'a dit:

lheveder@lheveder-MS-7309:~$ sudo pwmconfig
File /var/run/fancontrol.pid exists. This typically means that the
fancontrol deamon is running. You should stop it before running pwmconfig.
If you are certain that fancontrol is not running, then you can delete
/var/run/fancontrol.pid manually.

En gros si j'ai bien compris sa dit:" si rien ne marche supprimer /var/run/fancontrol.pid manuellement

J'ai donc chercher comment faire sa est j'ai supprimer(commande rm si j'ai bien tous compris).


Je relance donc Pwm config et voila se que j'obtiens maintenant:

lheveder@lheveder-MS-7309:~$ sudo pwmconfig
# pwmconfig revision 5770 (2009-09-16)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

Found the following devices:
   hwmon0/device is k8temp
   hwmon1/device is f71882fg

Found the following PWM controls:
   hwmon1/device/pwm1
hwmon1/device/pwm1 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) n
   hwmon1/device/pwm2
hwmon1/device/pwm2 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) n
   hwmon1/device/pwm3
hwmon1/device/pwm3 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) n
   hwmon1/device/pwm4
hwmon1/device/pwm4 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) n
There are no usable PWM outputs.
lheveder@lheveder-MS-7309:~$



Et la si j'ai toujours bien tous compris sa me dit que aucun PWM n'est lier a un ventilateur?????? et pour le moment je suis bloquer.


Bon je continue mais recherche mais si quelque peut m'aider sa serait pas de refus.
Merci d'avance

Hors ligne

#6 Le 11/11/2010, à 21:23

pharos5588

Re : [AIDE] Problème de ventilateur avec Ubuntu 10.10

Bon après quelque réglage dans le bios j'arrive a baisser un peut la vitesse du FAN cpu Mais se n'est pas encore sa.

Il tourne maintenant autour de 2100tr/min

Hors ligne

#7 Le 15/11/2010, à 21:00

iAlexy

Re : [AIDE] Problème de ventilateur avec Ubuntu 10.10

@Climenole : Merci, je vais regarder l'article et je te tiens, au courant, désolé du retard de réponse ^^

Hors ligne