Ubuntu-fr

PhiX

Erreur Gravure CDRW K3B

Bonjour à tous,

Après une mise-à-jour, la gravure de CD est devenue impossible.
D'après la sortie de k3b ci-dessous, Il y aurait un problème de droits qui empêche la gravure.

System
-----------------------
K3b Version: 0.12.14

KDE Version: 3.5.2
QT Version:  3.3.6
Kernel:      2.6.15-26-386
Devices
-----------------------
TOSHIBA ODD-DVD SD-R6372 1030 (/dev/hdc, ) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R96R; Restricted Overwrite]

Used versions
-----------------------
cdrecord: 2.1.1a01

cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.15-26-386
/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
/usr/bin/X11/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/X11/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'TOSHIBA '
Identifikation : 'ODD-DVD SD-R6372'
Revision       : '1030'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0010 
Profile: 0x0008 
Profile: 0x0009 
Profile: 0x000A (current)
Profile: 0x0011 
Profile: 0x0013 
Profile: 0x0014 
Profile: 0x001A 
Profile: 0x001B 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1407600 = 1374 KB
FIFO size      : 4194304 = 4096 KB
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
Track 01: data   697 MB        
Total size:      801 MB (79:23.96) = 357297 sectors
Lout start:      801 MB (79:25/72) = 357297 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 0
  Reference speed: 0
  Is not unrestricted
  Is erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11075 (97:34/25)
  ATIP start of lead out: 359849 (79:59/74)
  2T speed low:  6 2T speed high:  0 (reserved val  9)
  power mult factor: 0 0
  recommended erase/write power: 0
  A1 values: 00 00 80
  A2 values: 39 80 00
  A3 values: 04 C4 B8
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 2552
Starting to write CD/DVD at speed 10 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
/usr/bin/X11/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
/usr/bin/X11/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 08 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x08 (cannot write - application code mismatch) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.000s timeout 200s
/usr/bin/X11/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 08 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x08 (cannot write - application code mismatch) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.000s timeout 200s
/usr/bin/X11/cdrecord: A write error occured.
/usr/bin/X11/cdrecord: Please properly read the error message above.
Sending CUE sheet...
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1374 K BSize: 1374 K
Starting new track at sector: 0
Track 01:    0 of  697 MB written.
write track data: error after 0 bytes
Writing  time:    5.012s
Average write speed 952.1x.
Fixating...
Fixating time:    0.000s
/usr/bin/X11/cdrecord: fifo had 64 puts and 1 gets.
/usr/bin/X11/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=/dev/hdc speed=16 -dao driveropts=burnfree -eject -overburn -data /home/phix/ubuntu-6.06-desktop-i386.iso

[Détails]
Dapper à jour
L'option "Use Burnfree" est cochée et pourtant il ne semble pas activé.
En mode TAO, ça ne grave pas non plus.

ls -la /usr/bin/cdrecord /usr/bin/cdrdao
-rwsrwsrwx 1 root root 133 2006-04-12 09:32 /usr/bin/cdrecord
-rws--x--x 1 root root 549072 2005-12-10 23:19 /usr/bin/cdrdao

Myster

Re : Erreur Gravure CDRW K3B

sudo dpkg-reconfigure cdrecord

Et tu mets oui à la question suid root.
Ca c'est reglé mais ca ne marche pas mieu pour graver apres.

---

Il y a rien de plus beau que le Tux

PhiX

Re : Erreur Gravure CDRW K3B

je n'avais pas pensé à dpkg-reconfigure, merci.

Ceci dit, ça ne grave toujours pas.

A write error has occured
unable to fixate the disc

Myster

Re : Erreur Gravure CDRW K3B

Dans /etc/mtab ton graveur est bien indiqué parce que moi aussi j'ai des problemes avec tous les cds.
Parce que le mien était en lecteur cd vu que c'est un combo alors...gnome-volume-manager le detecte comme un lecteur cd faut que je change ca.
Voila a+

---

Il y a rien de plus beau que le Tux