Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 21/07/2006, à 18:13

Aldarone

[Resolu] Problème de Rafraichissement (pour changer...)

Bon c'est un problème récurrent ici et je suis dans une situation un peu complexe... J'ai du éplucher tous (ou presque...) les sujets d'ici, du wiki anglais, des modelines,... mais c'est toujours pas résolu...

Je voudrai bien pouvoir utiliser mon PC sans être malade au bout d'une heure... Donc pour ça il faut monter mon taux de rafraichissement au moins a 75Hz... Sauf que X est pas d'accord (enfin si... en 1024*768... mais c'est pas très confortable comme résolution...)

L'idéal serait du 1280*960 en 85Hz (officiellement non supportée par mon écran mais sous windows j'ai pu le pousser jusque là) mais au moins du 1280*960 en 75Hz...
J'ai une GeForce6600GT avec un Iiyama Vision Master Pro 411

Voila mon petit xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Mon May 15 13:23:42 PDT 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbVariant" "latin9"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"

	# V-freq: 85.00 Hz  // h-freq: 85.99 KHz
    Identifier     "IIYAMA"
    VendorName     "IIYAMA"
    ModelName      "Vision Master Pro 411"
    HorizSync       30.0 - 86.0
    VertRefresh     50.0 - 180.0
    ModeLine       "1280x960@85" 171.0 1280 1312 1960 1992 960 978 991 1009
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
    Driver         "nvidia"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
    Monitor        "IIYAMA"
    DefaultDepth    24
    SubSection     "Display"
        Depth       1
        Modes      "1280x960@85"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1280x960@85"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1280x960@85"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1280x960@85"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x960@85"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x960@85"
    EndSubSection
EndSection

ainsi que mon dernier xorg.0.log (des fois que ça serve...) :

X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.15.7 i686
Current Operating System: Linux aldarone-desktop 2.6.15-26-386 #1 PREEMPT Mon Jul 17 19:52:53 UTC 2006 i686
Build Date: 16 March 2006
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 21 18:57:56 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "IIYAMA"
(**) |   |-->Device "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to "/usr/share/X11/fonts/misc,/usr/share/X11/fonts/100dpi/:unscaled,/usr/share/X11/fonts/75dpi/:unscaled,/usr/share/X11/fonts/Type1,/usr/share/X11/fonts/100dpi,/usr/share/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.8
	X.Org XInput driver : 0.5
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 0000,0000 rev a2 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 10de,0c17 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 10de,0c17 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 10de,0c17 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 10de,0c17 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 10de,0c17 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 10de,0c11 rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 10de,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 10de,0c11 rev a3 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 10de,0c11 rev a3 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 10de,0c11 rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 10de,0c11 rev a1 class 02,00,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 10de,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 01:07:0: chip 1102,0002 card 1102,8027 rev 08 class 04,01,00 hdr 80
(II) PCI: 01:07:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 hdr 80
(II) PCI: 01:08:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:0b:0: chip 13f6,0111 card 270f,f462 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:00:0: chip 10de,00f1 card 107d,2011 rev a2 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000c000 - 0x0000cfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xe7000000 - 0xe8ffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0x50000000 - 0x500fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xe4000000 - 0xe6ffffff (0x3000000) MX[b]
(II) Bus 2 prefetchable memory range:
	[0] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(--) PCI:*(2:0:0) nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] rev 162, Mem @ 0xe4000000/24, 0xd0000000/28, 0xe5000000/24
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xe8000000 - 0xe80000ff (0x100) MX[b]
	[1] -1	0	0xe9000000 - 0xe9000fff (0x1000) MX[b]
	[2] -1	0	0xe9005000 - 0xe90050ff (0x100) MX[b]
	[3] -1	0	0xe9004000 - 0xe9004fff (0x1000) MX[b]
	[4] -1	0	0xe9003000 - 0xe9003fff (0x1000) MX[b]
	[5] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[6] -1	0	0xe5000000 - 0xe5ffffff (0x1000000) MX[b](B)
	[7] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
	[8] -1	0	0xe4000000 - 0xe4ffffff (0x1000000) MX[b](B)
	[9] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
	[10] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[11] -1	0	0x0000c400 - 0x0000c407 (0x8) IX[b]
	[12] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[b]
	[13] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[b]
	[14] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[b]
	[15] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[b]
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xe8000000 - 0xe80000ff (0x100) MX[b]
	[1] -1	0	0xe9000000 - 0xe9000fff (0x1000) MX[b]
	[2] -1	0	0xe9005000 - 0xe90050ff (0x100) MX[b]
	[3] -1	0	0xe9004000 - 0xe9004fff (0x1000) MX[b]
	[4] -1	0	0xe9003000 - 0xe9003fff (0x1000) MX[b]
	[5] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[6] -1	0	0xe5000000 - 0xe5ffffff (0x1000000) MX[b](B)
	[7] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
	[8] -1	0	0xe4000000 - 0xe4ffffff (0x1000000) MX[b](B)
	[9] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
	[10] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[11] -1	0	0x0000c400 - 0x0000c407 (0x8) IX[b]
	[12] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[b]
	[13] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[b]
	[14] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[b]
	[15] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xe8000000 - 0xe80000ff (0x100) MX[b]
	[5] -1	0	0xe9000000 - 0xe9000fff (0x1000) MX[b]
	[6] -1	0	0xe9005000 - 0xe90050ff (0x100) MX[b]
	[7] -1	0	0xe9004000 - 0xe9004fff (0x1000) MX[b]
	[8] -1	0	0xe9003000 - 0xe9003fff (0x1000) MX[b]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[10] -1	0	0xe5000000 - 0xe5ffffff (0x1000000) MX[b](B)
	[11] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
	[12] -1	0	0xe4000000 - 0xe4ffffff (0x1000000) MX[b](B)
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[15] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
	[16] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[17] -1	0	0x0000c400 - 0x0000c407 (0x8) IX[b]
	[18] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[b]
	[19] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[b]
	[20] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[b]
	[21] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[b]
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 7.0.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.8762
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.1.0
	ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.8762
	Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.0.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.0.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.5
(II) Wacom driver level: 47-0.7.2 $
(II) NVIDIA X Driver  1.0-8762  Mon May 15 13:09:21 PDT 2006
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 02:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 7.0.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.8
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xe8000000 - 0xe80000ff (0x100) MX[b]
	[5] -1	0	0xe9000000 - 0xe9000fff (0x1000) MX[b]
	[6] -1	0	0xe9005000 - 0xe90050ff (0x100) MX[b]
	[7] -1	0	0xe9004000 - 0xe9004fff (0x1000) MX[b]
	[8] -1	0	0xe9003000 - 0xe9003fff (0x1000) MX[b]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[10] -1	0	0xe5000000 - 0xe5ffffff (0x1000000) MX[b](B)
	[11] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
	[12] -1	0	0xe4000000 - 0xe4ffffff (0x1000000) MX[b](B)
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[15] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
	[16] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[17] -1	0	0x0000c400 - 0x0000c407 (0x8) IX[b]
	[18] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[b]
	[19] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[b]
	[20] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[b]
	[21] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[b]
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xe8000000 - 0xe80000ff (0x100) MX[b]
	[5] -1	0	0xe9000000 - 0xe9000fff (0x1000) MX[b]
	[6] -1	0	0xe9005000 - 0xe90050ff (0x100) MX[b]
	[7] -1	0	0xe9004000 - 0xe9004fff (0x1000) MX[b]
	[8] -1	0	0xe9003000 - 0xe9003fff (0x1000) MX[b]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[10] -1	0	0xe5000000 - 0xe5ffffff (0x1000000) MX[b](B)
	[11] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
	[12] -1	0	0xe4000000 - 0xe4ffffff (0x1000000) MX[b](B)
	[13] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b]
	[14] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b]
	[15] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b]
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[18] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
	[19] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[20] -1	0	0x0000c400 - 0x0000c407 (0x8) IX[b]
	[21] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[b]
	[22] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[b]
	[23] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[b]
	[24] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[b]
	[25] 0	0	0xe60003b0 - 0xe60003bb (0xc) IS[b]
	[26] 0	0	0xe60003c0 - 0xe60003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT at PCI:2:0:0
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.43.02.46.68
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6600 GT at PCI:2:0:0:
(--) NVIDIA(0):     Iiyama (CRT-0)
(--) NVIDIA(0): Iiyama (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): No valid modes for "1280x960@85"; removing.
(WW) NVIDIA(0): 
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0):     "nvidia-auto-select".
(WW) NVIDIA(0): 
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot compute
(WW) NVIDIA(0):     DPI from EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xe5000000 - 0xe5ffffff (0x1000000) MX[b]
	[1] 0	0	0xd0000000 - 0xdfffffff (0x10000000) MX[b]
	[2] 0	0	0xe4000000 - 0xe4ffffff (0x1000000) MX[b]
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[7] -1	0	0xe8000000 - 0xe80000ff (0x100) MX[b]
	[8] -1	0	0xe9000000 - 0xe9000fff (0x1000) MX[b]
	[9] -1	0	0xe9005000 - 0xe90050ff (0x100) MX[b]
	[10] -1	0	0xe9004000 - 0xe9004fff (0x1000) MX[b]
	[11] -1	0	0xe9003000 - 0xe9003fff (0x1000) MX[b]
	[12] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[13] -1	0	0xe5000000 - 0xe5ffffff (0x1000000) MX[b](B)
	[14] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
	[15] -1	0	0xe4000000 - 0xe4ffffff (0x1000000) MX[b](B)
	[16] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
	[17] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
	[18] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[21] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
	[22] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[23] -1	0	0x0000c400 - 0x0000c407 (0x8) IX[b]
	[24] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[b]
	[25] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[b]
	[26] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[b]
	[27] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[b]
	[28] 0	0	0xe60003b0 - 0xe60003bb (0xc) IS[b]
	[29] 0	0	0xe60003c0 - 0xe60003df (0x20) IS[b]
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
error opening security policy file /etc/X11/xserver/SecurityPolicy
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "XkbVariant" "latin9"
(**) Generic Keyboard: XkbVariant: "latin9"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
	No such file or directory.
Error opening /dev/wacom : No such file or directory
(II) Configured Mouse: ps2EnableDataReporting: succeeded

En fait j'ai l'impression qu'il demande directement a mon moniteur ce dont il est capable plutot que se baser sur le xorg.conf en ce qui concerne la résolution (pourtant j'ai désactivé le module dcc...)

Merci a tous ceux qui se donneront la peine de lire ^^

Dernière modification par Aldarone (Le 21/07/2006, à 18:55)

Hors ligne

#2 Le 21/07/2006, à 18:24

PhilippeP

Re : [Resolu] Problème de Rafraichissement (pour changer...)

Ta carte est pas le probleme c'est ton moniteur qui supporte pas ton modeline :

(II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT at PCI:2:0:0
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.43.02.46.68
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6600 GT at PCI:2:0:0:
(--) NVIDIA(0):     Iiyama (CRT-0)
(--) NVIDIA(0): Iiyama (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): No valid modes for "1280x960@85"; removing.
(WW) NVIDIA(0): 
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0):     "nvidia-auto-select".
(WW) NVIDIA(0): 
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot compute
(WW) NVIDIA(0):     DPI from EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default

donc il retourne dans le mode par defaut ...
tu dois trouver le bon modeline en fonction des caracteristiques (voir doc) de ton moniteur ... je suppose que tu a trouvé des sites pour calculer le modeline


Attention, je suis loin d'être un Goubunturou ...
Il m'arrive de me tromper (si si...)
Desktop Kubuntu 12.04 KDE 4.9 SC - Lenovo Ideapad S10 3T Kubuntu 12.04 KDE 4.8 SC

Hors ligne

#3 Le 21/07/2006, à 18:26

traaf

Re : [Resolu] Problème de Rafraichissement (pour changer...)

mince, je croyais tomber sur un topic parlant de la canicule cool

ok ---> []


Vault106, musique libre, enjoy it /!\

Hors ligne

#4 Le 21/07/2006, à 18:28

Aldarone

Re : [Resolu] Problème de Rafraichissement (pour changer...)

HorizSync       30.0 - 86.0
VertRefresh     50.0 - 180.0

Ceux là son tirés du manuel de mon écran. Je les ai rentré dans le générateur de modeline... Il faudrait donc que j'en essaye plusieurs différents ?

Hors ligne

#5 Le 21/07/2006, à 18:35

PhilippeP

Re : [Resolu] Problème de Rafraichissement (pour changer...)

et la resolution max de l'ecran ??

normalement le generateur te donne toute une liste de resolution possible ...


Attention, je suis loin d'être un Goubunturou ...
Il m'arrive de me tromper (si si...)
Desktop Kubuntu 12.04 KDE 4.9 SC - Lenovo Ideapad S10 3T Kubuntu 12.04 KDE 4.8 SC

Hors ligne

#6 Le 21/07/2006, à 18:54

Aldarone

Re : [Resolu] Problème de Rafraichissement (pour changer...)

Le générateur m'indique 1432x1074 comme résolution max a 60Hz alors que dans le manuel c'est écrit 1600x1200 a 60Hz... Je me suis basé sur la bande passante maximum indiquée dans la doc qui est de 130Mhz et du coup j'ai un modeline 1280*960 à 75Hz qui fonctionne... mais ça me chagrine pour mon petit 85Hz qui était si agréable à mes yeux sensibles...

En bref, conclusion: Pensez à la bande passante, la fréquence horizontale ne suffit pas ^^

Et merci PhilippeP

EDIT: pour ceux que ça intéresse, c'est ce générateur qui m'a sorti du pétrin: http://koala.ilog.fr/cgi-bin/nph-colas-modelines-fr

Dernière modification par Aldarone (Le 21/07/2006, à 19:09)

Hors ligne

#7 Le 21/07/2006, à 19:05

PhilippeP

Re : [Resolu] Problème de Rafraichissement (pour changer...)

Bah 75 c'est deja pas mal du tout .... il y a pas si longtemps , on depassait pas trop le 60 ....
Ravi d'avoir pu t'aider ...  smile

Dernière modification par PhilippeP (Le 21/07/2006, à 19:10)


Attention, je suis loin d'être un Goubunturou ...
Il m'arrive de me tromper (si si...)
Desktop Kubuntu 12.04 KDE 4.9 SC - Lenovo Ideapad S10 3T Kubuntu 12.04 KDE 4.8 SC

Hors ligne

#8 Le 21/07/2006, à 20:27

tonyB

Re : [Resolu] Problème de Rafraichissement (pour changer...)

Bonsoir

je pense que tes sections

SubSection     "Display"
        Depth       24
        Modes      "1280x960@85"
    EndSubSection

ne sont pas bonnes, il ne faut pas mettre le @85


j'ai un peu le même problème mais dans mon cas je souhaite baisser le taux de rafraichissement à 60Hz au lieu des 75hz qui me sont imposés ( mon écran plat fonctionne beaucoup mieux à 60 )

j'ai lancé sous un terminal : xrandr
cela me donne les résolutions supportés par le moniteur :
*0   1280 x 1024   ( 342mm x 271mm )  *75
1   1024 x 768    ( 342mm x 271mm )   75
2    800 x 600    ( 342mm x 271mm )   75
3    640 x 480    ( 342mm x 271mm )   75

je n'ai effectivement pas de 60 dans la premiere ligne comme j'ai pu voir sur certains posts

en utilisant sous un terminal : gtf 1280 1024 60
je crée un modeline que j'ajoute dans la section Monitor, mais il n'en tient pas compte

un extrait de xorg.conf

Section "Device"
    Identifier    "NVIDIA Corporation NV36.2 [GeForce FX 5700]"
    Driver        "nvidia"
    BusID        "PCI:1:0:0"
EndSection

Section "Monitor"
    Identifier    "Écran générique"
    Option        "DPMS"
    HorizSync    30-83
    VertRefresh    56-76
    Modeline "1280x1024_60.00"  108.88  1280 1360 1496 1712  1024 1025 1028 1060
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "NVIDIA Corporation NV36.2 [GeForce FX 5700]"
    Monitor        "Écran générique"
    DefaultDepth    24
    SubSection "Display"
        Depth        1
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

j'ai récupéré  HorizSync    30-83      et VertRefresh    56-76 dans le manuel de l'écran

je précise que juste avant j'utilisais le driver nv au lieu de nvidia
et là j'avais la possibilité de choisir 60 dans le menu Resolution de l'écran sous Système/Préférence

si quelqu'un a une idée !
merci

#9 Le 21/07/2006, à 21:10

tonyB

Re : [Resolu] Problème de Rafraichissement (pour changer...)

re

je me réponds  à moi même car maintenant cela fonctionne
et j'ai utilisé le même type de config que Aldarone

donc en fait le label indiqué dans le modeline doit être le label repris dans la resolution pour Mode

=> ce qui donne chez moi

Section "Device"
	Identifier	"NVIDIA Corporation NV36.2 [GeForce FX 5700]"
	Driver		"nvidia"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Écran générique"
	Option		"DPMS"
	HorizSync	30-83
	VertRefresh	56-76
	Modeline "1280x1024@60"  108.88  1280 1360 1496 1712  1024 1025 1028 1060 -HSync +Vsync
	Modeline "1024x768@60"  64.11  1024 1080 1184 1344  768 769 772 795  -HSync +Vsync
	Modeline "800x600@60"  38.22  800 832 912 1024  600 601 604 622  -HSync +Vsync
	Modeline "640x480@60"  23.86  640 656 720 800  480 481 484 497  -HSync +Vsync
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"NVIDIA Corporation NV36.2 [GeForce FX 5700]"
	Monitor		"Écran générique"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024@60" "1024x768@60" "800x600@60" "640x480@60"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024@60" "1024x768@60" "800x600@60" "640x480@60"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024@60" "1024x768@60" "800x600@60" "640x480@60"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024@60" "1024x768@60" "800x600@60" "640x480@60"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024@60" "1024x768@60" "800x600@60" "640x480@60"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024@60" "1024x768@60" "800x600@60" "640x480@60"
	EndSubSection
EndSection

j'ai maintenant la bonne résolution et le bon taux
pour Aldarone, à mon avis essaye de repartir avec une section sans modeline
puis lance xrandr dans un terminal pour voir les possibilités par défaut.
et utilise gtf pour générer les modelines que tu souhaites utiliser.

j'espère que cela t'aidera car gràce à ton post j'ai résolu mon problème

merci