Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 11/02/2011, à 16:03

Niltugor

Problème NX Capabilities et écran noir après installation

Bonjour,

J'ai récemment acheté un netbook (http://www.packardbell.fr/pb/fr/FR/cont … .BK102.011) et demandé au constructeur de me rembourser windows. Je me retrouve donc, tout joyeux, avec un ordinateur nu.

J'ai tout d'abord installé Ubuntu Netbook Edition grâce à une LiveUSB. Tout s'est bien passé pendant l'installation, mais au redémarrage, j'arrive en mode console, l'ordinateur me demande mes identifiants puis me dit

 Your CPU appears to be lacking expected security protections.
Please check your BIOS settings, or for more information, run :
/usr/bin/check-bios-nx --verbose

Après m'être renseigné sur ce problème, j'ai cru comprendre que ce n'était pas grave et que ça ne devrait pas empêcher l'ordinateur de démarrer (ceci dit je ne trouve pas l'option à changer dans le BIOS, puisque dans l'onglet Security je n'ai que des mot de passe d'utilisateur à entrer et je ne trouve nulle part l'option non-execute ou execute-disable à activer...).

Si j'attends un peu, j'arrive sur un écran noir, et là je ne peux rien faire à part appuyer sur le bouton d'arrêt de l'ordinateur, qui l'éteint tout à faire normalement...
J'ai essayé d'installer Ubuntu 10.10 desktop et le problème est exactement le même.

Bref, je ne sais pas trop quoi faire... J'ai cherché sur internet mais je n'ai rien trouvé qui m'a aidé et je ne comprends pas trop d'où vient le problème. Quelqu'un pourrait-il m'aider ?

Merci d'avance !

Hors ligne

#2 Le 11/02/2011, à 23:30

Niltugor

Re : Problème NX Capabilities et écran noir après installation

Je ne sais pas si ça peut aider, mais avant que l'écran noir arrive, j'ai quelques lignes qui s'affichent :

i915: gave up waiting for init of module intel_agp
i915: Unknow symbol intel_agp_enabled (err -16)
i915: gave up waiting for init of module intel_agp
i915: Unknow symbol intel_max_stolen (err -16)

Mais je ne sais même pas si ça a un rapport avec mon problème...

Hors ligne

#3 Le 11/02/2011, à 23:50

R_Ouellette

Re : Problème NX Capabilities et écran noir après installation

Ce fil de discussion (en anglais) donne une demi solution : http://ubuntuforums.org/showthread.php?t=1481459.

Une traduction rapide indique que l'option n'est pas toujours évidente à trouver dans le BIOS; si on ne trouve pas l'option, alors le plus simple est d'enlever la commande qui fait cette vérification de la façon suivante :

sudo rm /etc/update-motd.d/20-cpu-checker

Hors ligne

#4 Le 11/02/2011, à 23:59

Niltugor

Re : Problème NX Capabilities et écran noir après installation

Merci pour ta réponse. Je viens d'essayer cette commande et, effectivement, il ne m'affiche plus le message.
Cependant j'arrive toujours sur un écran noir après quelques secondes. J'ai essayé d'appuyer sur ctrl+alt+f1 et ça ne fait rien. La commande startx ne fait qu'afficher l'écran noir plus vite...

Hors ligne

#5 Le 12/02/2011, à 19:30

Niltugor

Re : Problème NX Capabilities et écran noir après installation

Pas d'idée ? :'(

Hors ligne

#6 Le 12/02/2011, à 19:30

R_Ouellette

Re : Problème NX Capabilities et écran noir après installation

Niltugor a écrit :

Je ne sais pas si ça peut aider, mais avant que l'écran noir arrive, j'ai quelques lignes qui s'affichent :

i915: gave up waiting for init of module intel_agp
i915: Unknow symbol intel_agp_enabled (err -16)
i915: gave up waiting for init of module intel_agp
i915: Unknow symbol intel_max_stolen (err -16)

Mais je ne sais même pas si ça a un rapport avec mon problème...

agp c'est le type de connexion de la carte graphique. La carte graphique ne semble donc pas reconnue d'où l'écran noir... Est-ce la même chose avec un liveCD ou une clé USB ? Si l'affichage fonctionne avec un système lancé en mémoire vive, je copierais le fichier

/var/log/Xorg*.log

vers une clé USB ainsi que le contenu de la commande dmesg

dmesg > /chemin/de/la/clé/USB

On y trouverara sûrement des directives concernant la carte vidéo.

Bonne chance !

Hors ligne

#7 Le 13/02/2011, à 21:32

Niltugor

Re : Problème NX Capabilities et écran noir après installation

Avec une clé USB ça marche très bien en fait (à part le son mais c'est déjà beaucoup moins gênant !)

Alors voici le fichier /var/log/Xorg*.log

[   214.814] 
X.Org X Server 1.9.0
Release Date: 2010-08-20
[   214.814] X Protocol Version 11, Revision 0
[   214.814] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[   214.814] Current Operating System: Linux ubuntu 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 i686
[   214.814] Kernel command line: noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-netbook.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[   214.814] Build Date: 16 September 2010  05:39:22PM
[   214.814] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support) 
[   214.815] Current version of pixman: 0.18.4
[   214.815]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   214.815] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   214.815] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 13 18:46:32 2011
[   214.816] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   214.817] (==) No Layout section.  Using the first Screen section.
[   214.817] (==) No screen section available. Using defaults.
[   214.817] (**) |-->Screen "Default Screen Section" (0)
[   214.817] (**) |   |-->Monitor "<default monitor>"
[   214.818] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   214.818] (==) Automatically adding devices
[   214.818] (==) Automatically enabling devices
[   214.818] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   214.818]     Entry deleted from font path.
[   214.819] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
[   214.819] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[   214.819] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   214.819] (II) Loader magic: 0x81f8e00
[   214.819] (II) Module ABI versions:
[   214.819]     X.Org ANSI C Emulation: 0.4
[   214.819]     X.Org Video Driver: 8.0
[   214.819]     X.Org XInput driver : 11.0
[   214.819]     X.Org Server Extension : 4.0
[   214.821] (--) PCI:*(0:0:2:0) 8086:0046:1025:0428 rev 2, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00003050/8
[   214.821] (II) Open ACPI successful (/var/run/acpid.socket)
[   214.821] (II) LoadModule: "extmod"
[   214.822] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   214.823] (II) Module extmod: vendor="X.Org Foundation"
[   214.823]     compiled for 1.9.0, module version = 1.0.0
[   214.823]     Module class: X.Org Server Extension
[   214.823]     ABI class: X.Org Server Extension, version 4.0
[   214.823] (II) Loading extension MIT-SCREEN-SAVER
[   214.823] (II) Loading extension XFree86-VidModeExtension
[   214.823] (II) Loading extension XFree86-DGA
[   214.823] (II) Loading extension DPMS
[   214.823] (II) Loading extension XVideo
[   214.823] (II) Loading extension XVideo-MotionCompensation
[   214.823] (II) Loading extension X-Resource
[   214.823] (II) LoadModule: "dbe"
[   214.824] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   214.824] (II) Module dbe: vendor="X.Org Foundation"
[   214.824]     compiled for 1.9.0, module version = 1.0.0
[   214.824]     Module class: X.Org Server Extension
[   214.824]     ABI class: X.Org Server Extension, version 4.0
[   214.824] (II) Loading extension DOUBLE-BUFFER
[   214.824] (II) LoadModule: "glx"
[   214.825] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   214.825] (II) Module glx: vendor="X.Org Foundation"
[   214.825]     compiled for 1.9.0, module version = 1.0.0
[   214.825]     ABI class: X.Org Server Extension, version 4.0
[   214.825] (==) AIGLX enabled
[   214.825] (II) Loading extension GLX
[   214.825] (II) LoadModule: "record"
[   214.826] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   214.826] (II) Module record: vendor="X.Org Foundation"
[   214.826]     compiled for 1.9.0, module version = 1.13.0
[   214.826]     Module class: X.Org Server Extension
[   214.826]     ABI class: X.Org Server Extension, version 4.0
[   214.826] (II) Loading extension RECORD
[   214.826] (II) LoadModule: "dri"
[   214.827] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   214.827] (II) Module dri: vendor="X.Org Foundation"
[   214.828]     compiled for 1.9.0, module version = 1.0.0
[   214.828]     ABI class: X.Org Server Extension, version 4.0
[   214.828] (II) Loading extension XFree86-DRI
[   214.828] (II) LoadModule: "dri2"
[   214.828] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   214.829] (II) Module dri2: vendor="X.Org Foundation"
[   214.829]     compiled for 1.9.0, module version = 1.2.0
[   214.829]     ABI class: X.Org Server Extension, version 4.0
[   214.829] (II) Loading extension DRI2
[   214.829] (==) Matched intel as autoconfigured driver 0
[   214.829] (==) Matched vesa as autoconfigured driver 1
[   214.829] (==) Matched fbdev as autoconfigured driver 2
[   214.829] (==) Assigned the driver to the xf86ConfigLayout
[   214.829] (II) LoadModule: "intel"
[   214.829] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   214.830] (II) Module intel: vendor="X.Org Foundation"
[   214.830]     compiled for 1.9.0, module version = 2.12.0
[   214.830]     Module class: X.Org Video Driver
[   214.830]     ABI class: X.Org Video Driver, version 8.0
[   214.830] (II) LoadModule: "vesa"
[   214.830] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   214.831] (II) Module vesa: vendor="X.Org Foundation"
[   214.831]     compiled for 1.8.99.905, module version = 2.3.0
[   214.831]     Module class: X.Org Video Driver
[   214.831]     ABI class: X.Org Video Driver, version 8.0
[   214.831] (II) LoadModule: "fbdev"
[   214.831] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   214.831] (II) Module fbdev: vendor="X.Org Foundation"
[   214.831]     compiled for 1.8.99.905, module version = 0.4.2
[   214.831]     ABI class: X.Org Video Driver, version 8.0
[   214.832] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
[   214.833] (II) VESA: driver for VESA chipsets: vesa
[   214.833] (II) FBDEV: driver for framebuffer: fbdev
[   214.833] (++) using VT number 7

[   214.834] (WW) Falling back to old probe method for vesa
[   214.834] (WW) Falling back to old probe method for fbdev
[   214.834] (II) Loading sub module "fbdevhw"
[   214.834] (II) LoadModule: "fbdevhw"
[   214.835] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   214.835] (II) Module fbdevhw: vendor="X.Org Foundation"
[   214.835]     compiled for 1.9.0, module version = 0.0.2
[   214.835]     ABI class: X.Org Video Driver, version 8.0
[   214.838] drmOpenDevice: node name is /dev/dri/card0
[   214.838] drmOpenDevice: open result is 9, (OK)
[   214.839] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[   214.839] drmOpenDevice: node name is /dev/dri/card0
[   214.839] drmOpenDevice: open result is 9, (OK)
[   214.839] drmOpenByBusid: drmOpenMinor returns 9
[   214.839] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[   214.839] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[   214.839] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   214.839] (==) intel(0): RGB weight 888
[   214.839] (==) intel(0): Default visual is TrueColor
[   214.839] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[   214.839] (--) intel(0): Chipset: "Arrandale"
[   214.839] (==) intel(0): video overlay key set to 0x101fe
[   214.856] (II) intel(0): Output VGA1 has no monitor section
[   214.857] (II) intel(0): Output LVDS1 has no monitor section
[   214.857] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   214.869] (II) intel(0): Output HDMI1 has no monitor section
[   214.874] (II) intel(0): Output DP1 has no monitor section
[   214.891] (II) intel(0): EDID for output VGA1
[   214.891] (II) intel(0): EDID for output LVDS1
[   214.891] (II) intel(0): Manufacturer: AUO  Model: 205c  Serial#: 0
[   214.891] (II) intel(0): Year: 2008  Week: 1
[   214.891] (II) intel(0): EDID Version: 1.3
[   214.891] (II) intel(0): Digital Display Input
[   214.891] (II) intel(0): Max Image Size [cm]: horiz.: 26  vert.: 14
[   214.891] (II) intel(0): Gamma: 2.20
[   214.891] (II) intel(0): No DPMS capabilities specified
[   214.892] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   214.892] (II) intel(0): First detailed timing is preferred mode
[   214.892] (II) intel(0): redX: 0.584 redY: 0.333   greenX: 0.338 greenY: 0.571
[   214.892] (II) intel(0): blueX: 0.158 blueY: 0.133   whiteX: 0.313 whiteY: 0.329
[   214.892] (II) intel(0): Manufacturer's mask: 0
[   214.892] (II) intel(0): Supported detailed timing:
[   214.892] (II) intel(0): clock: 65.5 MHz   Image Size:  256 x 144 mm
[   214.892] (II) intel(0): h_active: 1366  h_sync: 1390  h_sync_end 1406 h_blank_end 1406 h_border: 0
[   214.892] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 774 v_blanking: 776 v_border: 0
[   214.892] (II) intel(0): Unknown vendor-specific block f
[   214.892] (II) intel(0):  AUO
[   214.892] (II) intel(0):  B116XW02 V0
[   214.892] (II) intel(0): EDID (in hex):
[   214.892] (II) intel(0):     00ffffffffffff0006af5c2000000000
[   214.892] (II) intel(0):     01120103801a0e780a99859555569228
[   214.892] (II) intel(0):     22505400000001010101010101010101
[   214.892] (II) intel(0):     01010101010196195628500008301810
[   214.892] (II) intel(0):     24000090100000180000000f00000000
[   214.892] (II) intel(0):     00000000000000000020000000fe0041
[   214.892] (II) intel(0):     554f0a202020202020202020000000fe
[   214.892] (II) intel(0):     004231313658573032205630200a00f8
[   214.893] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[   214.893] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   214.893] (II) intel(0): Printing probed modes for output LVDS1
[   214.893] (II) intel(0): Modeline "1366x768"x60.0   65.50  1366 1390 1406 1406  768 770 774 776 -hsync -vsync (46.6 kHz)
[   214.893] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[   214.893] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz)
[   214.893] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   214.893] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   214.893] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   214.893] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   214.903] (II) intel(0): EDID for output HDMI1
[   214.908] (II) intel(0): EDID for output DP1
[   214.908] (II) intel(0): Output VGA1 disconnected
[   214.908] (II) intel(0): Output LVDS1 connected
[   214.908] (II) intel(0): Output HDMI1 disconnected
[   214.908] (II) intel(0): Output DP1 disconnected
[   214.908] (II) intel(0): Using exact sizes for initial modes
[   214.908] (II) intel(0): Output LVDS1 using initial mode 1366x768
[   214.908] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   214.908] (II) intel(0): Kernel page flipping support detected, but forcibly disabled.
[   214.908] (==) intel(0): DPI set to (96, 96)
[   214.908] (II) Loading sub module "fb"
[   214.908] (II) LoadModule: "fb"
[   214.909] (II) Loading /usr/lib/xorg/modules/libfb.so
[   214.910] (II) Module fb: vendor="X.Org Foundation"
[   214.910]     compiled for 1.9.0, module version = 1.0.0
[   214.910]     ABI class: X.Org ANSI C Emulation, version 0.4
[   214.910] (II) UnloadModule: "vesa"
[   214.910] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   214.910] (II) UnloadModule: "fbdev"
[   214.910] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   214.910] (II) UnloadModule: "fbdevhw"
[   214.910] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
[   214.910] (==) Depth 24 pixmap format is 32 bpp
[   214.910] (II) intel(0): [DRI2] Setup complete
[   214.910] (II) intel(0): [DRI2]   DRI driver: i965
[   214.910] (**) intel(0): Tiling enabled
[   214.910] (**) intel(0): SwapBuffers wait enabled
[   214.910] (==) intel(0): VideoRam: 262144 KB
[   214.910] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[   214.925] (II) UXA(0): Driver registered support for the following operations:
[   214.925] (II)         solid
[   214.925] (II)         copy
[   214.925] (II)         composite (RENDER acceleration)
[   214.926] (II)         put_image
[   214.926] (II)         get_image
[   214.926] (==) intel(0): Backing store disabled
[   214.926] (==) intel(0): Silken mouse enabled
[   214.926] (II) intel(0): Initializing HW Cursor
[   214.984] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   214.996] (==) intel(0): DPMS enabled
[   214.996] (==) intel(0): Intel XvMC decoder enabled
[   214.996] (II) intel(0): Set up textured video
[   214.996] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   214.996] (II) intel(0): direct rendering: DRI2 Enabled
[   214.997] (--) RandR disabled
[   214.997] (II) Initializing built-in extension Generic Event Extension
[   214.997] (II) Initializing built-in extension SHAPE
[   214.997] (II) Initializing built-in extension MIT-SHM
[   214.997] (II) Initializing built-in extension XInputExtension
[   214.997] (II) Initializing built-in extension XTEST
[   214.997] (II) Initializing built-in extension BIG-REQUESTS
[   214.997] (II) Initializing built-in extension SYNC
[   214.997] (II) Initializing built-in extension XKEYBOARD
[   214.997] (II) Initializing built-in extension XC-MISC
[   214.997] (II) Initializing built-in extension SECURITY
[   214.997] (II) Initializing built-in extension XINERAMA
[   214.997] (II) Initializing built-in extension XFIXES
[   214.997] (II) Initializing built-in extension RENDER
[   214.997] (II) Initializing built-in extension RANDR
[   214.997] (II) Initializing built-in extension COMPOSITE
[   214.997] (II) Initializing built-in extension DAMAGE
[   214.997] (II) Initializing built-in extension GESTURE
[   215.030] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   215.030] (II) AIGLX: enabled GLX_INTEL_swap_event
[   215.030] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   215.030] (II) AIGLX: enabled GLX_SGI_make_current_read
[   215.030] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   215.030] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[   215.030] (II) GLX: Initialized DRI2 GL provider for screen 0
[   215.031] (II) intel(0): Setting screen physical size to 361 x 203
[   215.065] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[   215.082] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   215.082] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   215.083] (II) LoadModule: "evdev"
[   215.083] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   215.084] (II) Module evdev: vendor="X.Org Foundation"
[   215.084]     compiled for 1.9.0, module version = 2.3.2
[   215.084]     Module class: X.Org XInput Driver
[   215.084]     ABI class: X.Org XInput driver, version 11.0
[   215.084] (**) Power Button: always reports core events
[   215.084] (**) Power Button: Device: "/dev/input/event2"
[   215.096] (II) Power Button: Found keys
[   215.096] (II) Power Button: Configuring as keyboard
[   215.096] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   215.096] (**) Option "xkb_rules" "evdev"
[   215.096] (**) Option "xkb_model" "evdev"
[   215.096] (**) Option "xkb_layout" "fr"
[   215.096] (**) Option "xkb_variant" "oss"
[   215.102] (II) XKB: generating xkmfile /var/lib/xkb/server-03B9BA61C8A1BA78B8E8368594E484A532C88FC7.xkm
[   215.152] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   215.152] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   215.153] (**) Video Bus: always reports core events
[   215.153] (**) Video Bus: Device: "/dev/input/event4"
[   215.164] (II) Video Bus: Found keys
[   215.164] (II) Video Bus: Configuring as keyboard
[   215.164] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[   215.164] (**) Option "xkb_rules" "evdev"
[   215.164] (**) Option "xkb_model" "evdev"
[   215.164] (**) Option "xkb_layout" "fr"
[   215.164] (**) Option "xkb_variant" "oss"
[   215.169] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   215.170] (II) No input driver/identifier specified (ignoring)
[   215.170] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[   215.170] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   215.170] (**) Sleep Button: always reports core events
[   215.170] (**) Sleep Button: Device: "/dev/input/event0"
[   215.184] (II) Sleep Button: Found keys
[   215.184] (II) Sleep Button: Configuring as keyboard
[   215.184] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[   215.184] (**) Option "xkb_rules" "evdev"
[   215.184] (**) Option "xkb_model" "evdev"
[   215.184] (**) Option "xkb_layout" "fr"
[   215.184] (**) Option "xkb_variant" "oss"
[   215.193] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event5)
[   215.193] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[   215.193] (**) 1.3M WebCam: always reports core events
[   215.194] (**) 1.3M WebCam: Device: "/dev/input/event5"
[   215.204] (II) 1.3M WebCam: Found keys
[   215.204] (II) 1.3M WebCam: Configuring as keyboard
[   215.204] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD)
[   215.204] (**) Option "xkb_rules" "evdev"
[   215.204] (**) Option "xkb_model" "evdev"
[   215.204] (**) Option "xkb_layout" "fr"
[   215.204] (**) Option "xkb_variant" "oss"
[   215.209] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[   215.209] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   215.210] (**) AT Translated Set 2 keyboard: always reports core events
[   215.210] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[   215.220] (II) AT Translated Set 2 keyboard: Found keys
[   215.220] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   215.220] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[   215.220] (**) Option "xkb_rules" "evdev"
[   215.220] (**) Option "xkb_model" "evdev"
[   215.220] (**) Option "xkb_layout" "fr"
[   215.220] (**) Option "xkb_variant" "oss"
[   215.221] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6)
[   215.221] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[   215.221] (**) PS/2 Generic Mouse: always reports core events
[   215.221] (**) PS/2 Generic Mouse: Device: "/dev/input/event6"
[   215.236] (II) PS/2 Generic Mouse: Found 3 mouse buttons
[   215.236] (II) PS/2 Generic Mouse: Found relative axes
[   215.236] (II) PS/2 Generic Mouse: Found x and y relative axes
[   215.236] (II) PS/2 Generic Mouse: Configuring as mouse
[   215.236] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[   215.236] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   215.236] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
[   215.236] (II) PS/2 Generic Mouse: initialized for relative axes.
[   215.237] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[   215.237] (II) No input driver/identifier specified (ignoring)
[   216.107] (II) intel(0): EDID vendor "AUO", prod id 8284
[   216.107] (II) intel(0): Printing DDC gathered Modelines:
[   216.107] (II) intel(0): Modeline "1366x768"x0.0   65.50  1366 1390 1406 1406  768 770 774 776 -hsync -vsync (46.6 kHz)
[   216.144] (II) intel(0): EDID vendor "AUO", prod id 8284
[   216.144] (II) intel(0): Printing DDC gathered Modelines:
[   216.144] (II) intel(0): Modeline "1366x768"x0.0   65.50  1366 1390 1406 1406  768 770 774 776 -hsync -vsync (46.6 kHz)
[   216.190] (II) intel(0): EDID vendor "AUO", prod id 8284
[   216.190] (II) intel(0): Printing DDC gathered Modelines:
[   216.190] (II) intel(0): Modeline "1366x768"x0.0   65.50  1366 1390 1406 1406  768 770 774 776 -hsync -vsync (46.6 kHz)
[   216.224] (II) intel(0): EDID vendor "AUO", prod id 8284
[   216.224] (II) intel(0): Printing DDC gathered Modelines:
[   216.224] (II) intel(0): Modeline "1366x768"x0.0   65.50  1366 1390 1406 1406  768 770 774 776 -hsync -vsync (46.6 kHz)
[   216.444] (II) intel(0): EDID vendor "AUO", prod id 8284
[   216.444] (II) intel(0): Printing DDC gathered Modelines:
[   216.444] (II) intel(0): Modeline "1366x768"x0.0   65.50  1366 1390 1406 1406  768 770 774 776 -hsync -vsync (46.6 kHz)
[   221.824] (II) intel(0): EDID vendor "AUO", prod id 8284
[   221.825] (II) intel(0): Printing DDC gathered Modelines:
[   221.825] (II) intel(0): Modeline "1366x768"x0.0   65.50  1366 1390 1406 1406  768 770 774 776 -hsync -vsync (46.6 kHz)
[   515.302] (II) intel(0): EDID vendor "AUO", prod id 8284
[   515.302] (II) intel(0): Printing DDC gathered Modelines:
[   515.302] (II) intel(0): Modeline "1366x768"x0.0   65.50  1366 1390 1406 1406  768 770 774 776 -hsync -vsync (46.6 kHz)

et le résultat de la commande dmesg :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35-22-generic (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[    0.000000]  BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000006f63f000 (usable)
[    0.000000]  BIOS-e820: 000000006f63f000 - 000000006f6bf000 (reserved)
[    0.000000]  BIOS-e820: 000000006f6bf000 - 000000006f7bf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006f7bf000 - 000000006f7ff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000006f7ff000 - 000000006f800000 (usable)
[    0.000000]  BIOS-e820: 000000006f800000 - 000000007c000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI 2.6 present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x6f800 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 040000000 mask FC0000000 write-back
[    0.000000]   3 base 070000000 mask FF0000000 uncachable
[    0.000000]   4 base 06F800000 mask FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (reserved)
[    0.000000]  modified: 0000000000001000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009d000 (usable)
[    0.000000]  modified: 000000000009d000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000006f63f000 (usable)
[    0.000000]  modified: 000000006f63f000 - 000000006f6bf000 (reserved)
[    0.000000]  modified: 000000006f6bf000 - 000000006f7bf000 (ACPI NVS)
[    0.000000]  modified: 000000006f7bf000 - 000000006f7ff000 (ACPI data)
[    0.000000]  modified: 000000006f7ff000 - 000000006f800000 (usable)
[    0.000000]  modified: 000000006f800000 - 000000007c000000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000feb00000 - 00000000feb04000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  modified: 00000000fed1b000 - 00000000fed20000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[    0.000000] RAMDISK: 6eb5e000 - 6f63f000
[    0.000000] Allocated new RAMDISK: 009a5000 - 01485121
[    0.000000] Move RAMDISK from 000000006eb5e000 - 000000006f63e120 to 009a5000 - 01485120
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 6f7fe120 00074 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 6f7fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 6f7ea000 0EB16 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 6f76e000 00040
[    0.000000] ACPI: ASF! 6f7fd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: HPET 6f7fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 6f7fa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 6f7f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC 6f7e9000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 6f7e5000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: ASPT 6f7e2000 00034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: WDAT 6f7e1000 00224 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SSDT 6f7e0000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 896MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000001 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0006f800
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000001 -> 0x00000002
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0006f63f
[    0.000000]     0: 0x0006f7ff -> 0x0006f800
[    0.000000] On node 0 totalpages: 456142
[    0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map c1487020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1793 pages used for memmap
[    0.000000]   HighMem zone: 227137 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36416 r0 d20928 u524288
[    0.000000] pcpu-alloc: s36416 r0 d20928 u524288 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] early_res array is doubled to 128 at [16800 - 177ff]
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 452573
[    0.000000] Kernel command line: noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-netbook.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 9134060 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Subtract (59 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0000100000 - 00009a0adc]   TEXT DATA BSS
[    0.000000]   #3 [000009d000 - 0000100000]   BIOS reserved
[    0.000000]   #4 [00009a1000 - 00009a42a2]             BRK
[    0.000000]   #5 [0000010000 - 0000011000]      TRAMPOLINE
[    0.000000]   #6 [0000011000 - 0000015000]     ACPI WAKEUP
[    0.000000]   #7 [0000015000 - 0000016000]         PGTABLE
[    0.000000]   #8 [00009a5000 - 0001486000]     NEW RAMDISK
[    0.000000]   #9 [0001486000 - 0001487000]         BOOTMEM
[    0.000000]   #10 [0001487000 - 0002277000]         BOOTMEM
[    0.000000]   #11 [0002277000 - 0002277004]         BOOTMEM
[    0.000000]   #12 [0002277040 - 0002277100]         BOOTMEM
[    0.000000]   #13 [0002277100 - 0002277154]         BOOTMEM
[    0.000000]   #14 [0002277180 - 000227a180]         BOOTMEM
[    0.000000]   #15 [000227a180 - 000227a1d8]         BOOTMEM
[    0.000000]   #16 [000227a200 - 000227d200]         BOOTMEM
[    0.000000]   #17 [000227d200 - 000227d225]         BOOTMEM
[    0.000000]   #18 [000227d240 - 000227d267]         BOOTMEM
[    0.000000]   #19 [000227d280 - 000227d4b0]         BOOTMEM
[    0.000000]   #20 [000227d4c0 - 000227d500]         BOOTMEM
[    0.000000]   #21 [000227d500 - 000227d540]         BOOTMEM
[    0.000000]   #22 [000227d540 - 000227d580]         BOOTMEM
[    0.000000]   #23 [000227d580 - 000227d5c0]         BOOTMEM
[    0.000000]   #24 [000227d5c0 - 000227d600]         BOOTMEM
[    0.000000]   #25 [000227d600 - 000227d640]         BOOTMEM
[    0.000000]   #26 [000227d640 - 000227d680]         BOOTMEM
[    0.000000]   #27 [000227d680 - 000227d6c0]         BOOTMEM
[    0.000000]   #28 [000227d6c0 - 000227d700]         BOOTMEM
[    0.000000]   #29 [000227d700 - 000227d740]         BOOTMEM
[    0.000000]   #30 [000227d740 - 000227d780]         BOOTMEM
[    0.000000]   #31 [000227d780 - 000227d7c0]         BOOTMEM
[    0.000000]   #32 [000227d7c0 - 000227d800]         BOOTMEM
[    0.000000]   #33 [000227d800 - 000227d840]         BOOTMEM
[    0.000000]   #34 [000227d840 - 000227d880]         BOOTMEM
[    0.000000]   #35 [000227d880 - 000227d8c0]         BOOTMEM
[    0.000000]   #36 [000227d8c0 - 000227d900]         BOOTMEM
[    0.000000]   #37 [000227d900 - 000227d910]         BOOTMEM
[    0.000000]   #38 [000227d940 - 000227d950]         BOOTMEM
[    0.000000]   #39 [000227d980 - 000227da1a]         BOOTMEM
[    0.000000]   #40 [000227da40 - 000227dada]         BOOTMEM
[    0.000000]   #41 [0002400000 - 000240e000]         BOOTMEM
[    0.000000]   #42 [0002480000 - 000248e000]         BOOTMEM
[    0.000000]   #43 [0002500000 - 000250e000]         BOOTMEM
[    0.000000]   #44 [0002580000 - 000258e000]         BOOTMEM
[    0.000000]   #45 [0002600000 - 000260e000]         BOOTMEM
[    0.000000]   #46 [0002680000 - 000268e000]         BOOTMEM
[    0.000000]   #47 [0002700000 - 000270e000]         BOOTMEM
[    0.000000]   #48 [0002780000 - 000278e000]         BOOTMEM
[    0.000000]   #49 [000227fb00 - 000227fb04]         BOOTMEM
[    0.000000]   #50 [000227fb40 - 000227fb44]         BOOTMEM
[    0.000000]   #51 [000227fb80 - 000227fba0]         BOOTMEM
[    0.000000]   #52 [000227fbc0 - 000227fbe0]         BOOTMEM
[    0.000000]   #53 [000227fc00 - 000227fc98]         BOOTMEM
[    0.000000]   #54 [000227fcc0 - 000227fcf8]         BOOTMEM
[    0.000000]   #55 [000227fd00 - 0002283d00]         BOOTMEM
[    0.000000]   #56 [0002283d00 - 0002303d00]         BOOTMEM
[    0.000000]   #57 [0002303d00 - 0002343d00]         BOOTMEM
[    0.000000]   #58 [000278e000 - 0003043fec]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (000377fe:0006f800)
[    0.000000] Memory: 1780088k/1826816k available (4928k kernel code, 44480k reserved, 2336k data, 684k init, 915720k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc0819000 - 0xc08c4000   ( 684 kB)
[    0.000000]       .data : 0xc05d029e - 0xc0818668   (2336 kB)
[    0.000000]       .text : 0xc0100000 - 0xc05d029e   (4928 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU-based detection of stalled CPUs is disabled.
[    0.000000]     Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 1064.203 MHz processor.
[    0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 2128.40 BogoMIPS (lpj=4256812)
[    0.000015] pid_max: default: 32768 minimum: 301
[    0.000047] Security Framework initialized
[    0.000070] AppArmor: AppArmor initialized
[    0.000073] Yama: becoming mindful.
[    0.000162] Mount-cache hash table entries: 512
[    0.000355] Initializing cgroup subsys ns
[    0.000361] Initializing cgroup subsys cpuacct
[    0.000370] Initializing cgroup subsys memory
[    0.000384] Initializing cgroup subsys devices
[    0.000387] Initializing cgroup subsys freezer
[    0.000391] Initializing cgroup subsys net_cls
[    0.000429] CPU: Physical Processor ID: 0
[    0.000432] CPU: Processor Core ID: 0
[    0.000441] mce: CPU supports 9 MCE banks
[    0.000462] CPU0: Thermal monitoring enabled (TM1)
[    0.000474] using mwait in idle threads.
[    0.000483] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.000498] ... version:                3
[    0.000500] ... bit width:              48
[    0.000503] ... generic registers:      4
[    0.000506] ... value mask:             0000ffffffffffff
[    0.000509] ... max period:             000000007fffffff
[    0.000512] ... fixed-purpose events:   3
[    0.000515] ... event mask:             000000070000000f
[    0.005462] ACPI: Core revision 20100428
[    0.063456] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.063464] ftrace: allocating 21758 entries in 43 pages
[    0.077542] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.077978] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.117658] CPU0: Intel(R) Celeron(R) CPU        U3400  @ 1.07GHz stepping 05
[    0.223311] Booting Node   0, Processors  #1
[    0.233536] Initializing CPU#1
[    0.331189] Brought up 2 CPUs
[    0.331193] Total of 2 processors activated (4256.37 BogoMIPS).
[    0.332220] devtmpfs: initialized
[    0.334500] regulator: core version 0.5
[    0.334537] Time: 18:42:57  Date: 02/13/11
[    0.334607] NET: Registered protocol family 16
[    0.334733] Trying to unpack rootfs image as initramfs...
[    0.334806] EISA bus registered
[    0.334819] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.334824] ACPI: bus type pci registered
[    0.334945] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.334951] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.334954] PCI: Using MMCONFIG for extended config space
[    0.334958] PCI: Using configuration type 1 for base access
[    1.330985] bio: create slab <bio-0> at 0
[    1.337198] ACPI: EC: Look up EC in DSDT
[    1.343461] ACPI: Executed 1 blocks of module-level executable AML code
[    1.356881] ACPI: BIOS _OSI(Linux) query ignored
[    1.360982] ACPI: SSDT 6f691c98 00222 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    1.362626] ACPI: Dynamic OEM Table Load:
[    1.362632] ACPI: SSDT (null) 00222 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    1.363516] ACPI: SSDT 6f68f018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    1.365113] ACPI: Dynamic OEM Table Load:
[    1.365118] ACPI: SSDT (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    1.366449] ACPI: SSDT 6f690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    1.368216] ACPI: Dynamic OEM Table Load:
[    1.368222] ACPI: SSDT (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    1.368707] ACPI: SSDT 6f68ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    1.370373] ACPI: Dynamic OEM Table Load:
[    1.370378] ACPI: SSDT (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    1.397613] ACPI: Interpreter enabled
[    1.397621] ACPI: (supports S0 S3 S4 S5)
[    1.397693] ACPI: Using IOAPIC for interrupt routing
[    1.427567] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.428192] ACPI: No dock devices found.
[    1.428199] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.430054] \_SB_.PCI0:_OSC invalid UUID
[    1.430057] _OSC request data:1 8 1f 
[    1.430066] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.432741] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.432747] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.432752] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.432759] pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfeafffff]
[    1.432858] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[    1.432870] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[    1.432877] pci 0000:00:02.0: reg 20: [io  0x3050-0x3057]
[    1.433018] pci 0000:00:16.0: reg 10: [mem 0x94406100-0x9440610f 64bit]
[    1.433118] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.433126] pci 0000:00:16.0: PME# disabled
[    1.433221] pci 0000:00:1a.0: reg 10: [mem 0x94405c00-0x94405fff]
[    1.433325] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.433333] pci 0000:00:1a.0: PME# disabled
[    1.433405] pci 0000:00:1b.0: reg 10: [mem 0x94400000-0x94403fff 64bit]
[    1.433497] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.433504] pci 0000:00:1b.0: PME# disabled
[    1.433651] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.433659] pci 0000:00:1c.0: PME# disabled
[    1.433806] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.433814] pci 0000:00:1c.1: PME# disabled
[    1.433909] pci 0000:00:1d.0: reg 10: [mem 0x94405800-0x94405bff]
[    1.434013] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.434021] pci 0000:00:1d.0: PME# disabled
[    1.434336] pci 0000:00:1f.2: reg 10: [io  0x3048-0x304f]
[    1.434348] pci 0000:00:1f.2: reg 14: [io  0x305c-0x305f]
[    1.434360] pci 0000:00:1f.2: reg 18: [io  0x3040-0x3047]
[    1.434372] pci 0000:00:1f.2: reg 1c: [io  0x3058-0x305b]
[    1.434384] pci 0000:00:1f.2: reg 20: [io  0x3020-0x303f]
[    1.434396] pci 0000:00:1f.2: reg 24: [mem 0x94405000-0x944057ff]
[    1.434468] pci 0000:00:1f.2: PME# supported from D3hot
[    1.434475] pci 0000:00:1f.2: PME# disabled
[    1.434538] pci 0000:00:1f.3: reg 10: [mem 0x94406000-0x944060ff 64bit]
[    1.434568] pci 0000:00:1f.3: reg 20: [io  0x3000-0x301f]
[    1.434664] pci 0000:00:1f.6: reg 10: [mem 0x94404000-0x94404fff 64bit]
[    1.434918] pci 0000:01:00.0: reg 10: [mem 0x93400000-0x9343ffff 64bit]
[    1.434932] pci 0000:01:00.0: reg 18: [io  0x2000-0x207f]
[    1.435043] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.435052] pci 0000:01:00.0: PME# disabled
[    1.435091] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    1.435099] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.435108] pci 0000:00:1c.0:   bridge window [mem 0x93400000-0x943fffff]
[    1.435121] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x913fffff 64bit pref]
[    1.435261] pci 0000:02:00.0: reg 10: [mem 0x92400000-0x9240ffff 64bit]
[    1.435369] pci 0000:02:00.0: supports D1
[    1.435372] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    1.435380] pci 0000:02:00.0: PME# disabled
[    1.435417] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.435422] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    1.435430] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    1.435438] pci 0000:00:1c.1:   bridge window [mem 0x92400000-0x933fffff]
[    1.435451] pci 0000:00:1c.1:   bridge window [mem 0x91400000-0x923fffff 64bit pref]
[    1.435572] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    1.435581] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.435589] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.435602] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.435607] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.435612] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.435616] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.435621] pci 0000:00:1e.0:   bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
[    1.435653] pci_bus 0000:00: on NUMA node 0
[    1.435670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.436253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.436696] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.436932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.437550] \_SB_.PCI0:_OSC invalid UUID
[    1.437553] _OSC request data:1 19 1f 
[    1.474363] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    1.474867] pci_bus 0000:ff: on NUMA node 0
[    1.475527] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.475848] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.476162] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.476476] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    1.476789] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.477104] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.477418] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.477731] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.477877] HEST: Table is not found!
[    1.478005] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.478026] vgaarb: loaded
[    1.478289] SCSI subsystem initialized
[    1.478398] libata version 3.00 loaded.
[    1.478483] usbcore: registered new interface driver usbfs
[    1.478503] usbcore: registered new interface driver hub
[    1.478537] usbcore: registered new device driver usb
[    1.479436] ACPI: WMI: Skipping duplicate GUID 05901221-D566-11D1-B2F0-00A0C9062910
[    1.479944] ACPI: WMI: Mapper loaded
[    1.479948] PCI: Using ACPI for IRQ routing
[    1.479952] PCI: pci_cache_line_size set to 64 bytes
[    1.480079] reserve RAM buffer: 0000000000002000 - 000000000000ffff 
[    1.480084] reserve RAM buffer: 000000000009d000 - 000000000009ffff 
[    1.480088] reserve RAM buffer: 000000006f63f000 - 000000006fffffff 
[    1.480093] reserve RAM buffer: 000000006f800000 - 000000006fffffff 
[    1.480238] NetLabel: Initializing
[    1.480241] NetLabel:  domain hash size = 128
[    1.480243] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.480263] NetLabel:  unlabeled traffic allowed by default
[    1.480323] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.480336] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.482368] Switching to clocksource tsc
[    4.596566] AppArmor: AppArmor Filesystem Enabled
[    4.596593] pnp: PnP ACPI init
[    4.596626] ACPI: bus type pnp registered
[    4.599597] pnp 00:05: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io  0x1000-0x1fff]
[    4.602689] pnp: PnP ACPI: found 11 devices
[    4.602694] ACPI: ACPI bus type pnp unregistered
[    4.602700] PnPBIOS: Disabled by ACPI PNP
[    4.602725] system 00:05: [io  0x0680-0x069f] has been reserved
[    4.602730] system 00:05: [io  0x0800-0x080f] has been reserved
[    4.602735] system 00:05: [io  0xffff] has been reserved
[    4.602740] system 00:05: [io  0xffff] has been reserved
[    4.602744] system 00:05: [io  0x0400-0x047f] has been reserved
[    4.602749] system 00:05: [io  0x0500-0x057f] has been reserved
[    4.602762] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    4.602768] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    4.602773] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    4.602778] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    4.602784] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    4.602789] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    4.602794] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    4.602799] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    4.602804] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    4.602809] system 00:09: [mem 0x7c000000-0x7c000fff] has been reserved
[    4.639774] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    4.639784] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    4.639795] pci 0000:00:1c.0:   bridge window [mem 0x93400000-0x943fffff]
[    4.639804] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x913fffff 64bit pref]
[    4.639816] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    4.639822] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    4.639832] pci 0000:00:1c.1:   bridge window [mem 0x92400000-0x933fffff]
[    4.639841] pci 0000:00:1c.1:   bridge window [mem 0x91400000-0x923fffff 64bit pref]
[    4.639854] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    4.639857] pci 0000:00:1e.0:   bridge window [io  disabled]
[    4.639866] pci 0000:00:1e.0:   bridge window [mem disabled]
[    4.639874] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    4.639908]   alloc irq_desc for 17 on node -1
[    4.639911]   alloc kstat_irqs on node -1
[    4.639923] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.639933] pci 0000:00:1c.0: setting latency timer to 64
[    4.639950]   alloc irq_desc for 16 on node -1
[    4.639953]   alloc kstat_irqs on node -1
[    4.639960] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    4.639968] pci 0000:00:1c.1: setting latency timer to 64
[    4.639982] pci 0000:00:1e.0: setting latency timer to 64
[    4.639990] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    4.639994] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    4.639999] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    4.640003] pci_bus 0000:00: resource 7 [mem 0x7c000000-0xfeafffff]
[    4.640007] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    4.640011] pci_bus 0000:01: resource 1 [mem 0x93400000-0x943fffff]
[    4.640016] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
[    4.640020] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    4.640024] pci_bus 0000:02: resource 1 [mem 0x92400000-0x933fffff]
[    4.640029] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
[    4.640033] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    4.640037] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    4.640041] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    4.640045] pci_bus 0000:03: resource 7 [mem 0x7c000000-0xfeafffff]
[    4.640109] NET: Registered protocol family 2
[    4.640211] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    4.640534] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    4.641067] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    4.641306] TCP: Hash tables configured (established 131072 bind 65536)
[    4.641310] TCP reno registered
[    4.641315] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    4.641327] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    4.641494] NET: Registered protocol family 1
[    4.641521] pci 0000:00:02.0: Boot video device
[    4.670940] PCI: CLS 64 bytes, default 64
[    4.670980] Simple Boot Flag at 0x44 set to 0x1
[    4.671289] cpufreq-nforce2: No nForce2 chipset.
[    4.671336] Scanning for low memory corruption every 60 seconds
[    4.671551] audit: initializing netlink socket (disabled)
[    4.671568] type=2000 audit(1297622581.524:1): initialized
[    4.692877] highmem bounce pool size: 64 pages
[    4.692887] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    4.695376] VFS: Disk quotas dquot_6.5.2
[    4.695481] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    4.696475] fuse init (API version 7.14)
[    4.696624] msgmni has been set to 1688
[    4.703884] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    4.703890] io scheduler noop registered
[    4.703894] io scheduler deadline registered
[    4.703918] io scheduler cfq registered (default)
[    4.704092] pcieport 0000:00:1c.0: setting latency timer to 64
[    4.704166]   alloc irq_desc for 40 on node -1
[    4.704169]   alloc kstat_irqs on node -1
[    4.704188] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    4.704333] pcieport 0000:00:1c.1: setting latency timer to 64
[    4.704401]   alloc irq_desc for 41 on node -1
[    4.704404]   alloc kstat_irqs on node -1
[    4.704418] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    4.704579] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.704877] \_SB_.PCI0:_OSC invalid UUID
[    4.704880] _OSC request data:1 0 1f 
[    4.705162] \_SB_.PCI0:_OSC invalid UUID
[    4.705165] _OSC request data:1 0 1f 
[    4.705464] \_SB_.PCI0:_OSC invalid UUID
[    4.705467] _OSC request data:1 0 1f 
[    4.705739] \_SB_.PCI0:_OSC invalid UUID
[    4.705742] _OSC request data:1 0 1f 
[    4.705802] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.705935] intel_idle: MWAIT substates: 0x1120
[    4.705938] intel_idle: v0.4 model 0x25
[    4.705941] intel_idle: lapic_timer_reliable_states 0xffffffff
[    4.707452] ACPI: AC Adapter [ADP1] (off-line)
[    4.707615] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    4.707631] ACPI: Sleep Button [SLPB]
[    4.707699] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    4.709278] ACPI: Lid Switch [LID0]
[    4.709366] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    4.709372] ACPI: Power Button [PWRF]
[    4.710979] ACPI: acpi_idle yielding to intel_idle
[    5.172707] Freeing initrd memory: 11140k freed
[    5.178236] thermal LNXTHERM:01: registered as thermal_zone0
[    5.178254] ACPI: Thermal Zone [TZS0] (28 C)
[    5.184657] thermal LNXTHERM:02: registered as thermal_zone1
[    5.184670] ACPI: Thermal Zone [TZS1] (30 C)
[    5.184815] ERST: Table is not found!
[    5.185054] isapnp: Scanning for PnP cards...
[    5.191658] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    5.194037] brd: module loaded
[    5.194945] loop: module loaded
[    5.195693] Fixed MDIO Bus: probed
[    5.195747] PPP generic driver version 2.4.2
[    5.195804] tun: Universal TUN/TAP device driver, 1.6
[    5.195807] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    5.195924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.195960] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.195979] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    5.195985] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    5.196035] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    5.196080] ehci_hcd 0000:00:1a.0: debug port 2
[    5.199996] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    5.200041] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x94405c00
[    5.218504] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    5.218695] hub 1-0:1.0: USB hub found
[    5.218703] hub 1-0:1.0: 3 ports detected
[    5.218809]   alloc irq_desc for 23 on node -1
[    5.218813]   alloc kstat_irqs on node -1
[    5.218823] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    5.218841] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.218847] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    5.218898] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.218935] ehci_hcd 0000:00:1d.0: debug port 2
[    5.222842] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    5.222873] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x94405800
[    5.242498] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    5.242658] hub 2-0:1.0: USB hub found
[    5.242665] hub 2-0:1.0: 3 ports detected
[    5.242760] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.242780] uhci_hcd: USB Universal Host Controller Interface driver
[    5.242911] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    5.257868] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.257878] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.257972] mice: PS/2 mouse device common for all mice
[    5.258157] rtc_cmos 00:06: RTC can wake from S4
[    5.258216] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    5.258254] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    5.258421] device-mapper: uevent: version 1.0.3
[    5.258588] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    5.258680] device-mapper: multipath: version 1.1.1 loaded
[    5.258684] device-mapper: multipath round-robin: version 1.0.0 loaded
[    5.258856] EISA: Probing bus 0 at eisa.0
[    5.258860] EISA: Cannot allocate resource for mainboard
[    5.258864] Cannot allocate resource for EISA slot 1
[    5.258867] Cannot allocate resource for EISA slot 2
[    5.258870] Cannot allocate resource for EISA slot 3
[    5.258873] Cannot allocate resource for EISA slot 4
[    5.258876] Cannot allocate resource for EISA slot 5
[    5.258879] Cannot allocate resource for EISA slot 6
[    5.258882] Cannot allocate resource for EISA slot 7
[    5.258885] Cannot allocate resource for EISA slot 8
[    5.258888] EISA: Detected 0 cards.
[    5.259084] cpuidle: using governor ladder
[    5.259240] cpuidle: using governor menu
[    5.259710] TCP cubic registered
[    5.259936] NET: Registered protocol family 10
[    5.260523] lo: Disabled Privacy Extensions
[    5.260865] NET: Registered protocol family 17
[    5.262362] Using IPI No-Shortcut mode
[    5.262517] PM: Resume from disk failed.
[    5.262535] registered taskstats version 1
[    5.263003]   Magic number: 15:544:746
[    5.263111] rtc_cmos 00:06: setting system clock to 2011-02-13 18:43:02 UTC (1297622582)
[    5.263116] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    5.263118] EDD information not available.
[    5.288624] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    5.554659] isapnp: No Plug & Play device found
[    5.554818] Freeing unused kernel memory: 684k freed
[    5.555265] Write protecting the kernel text: 4932k
[    5.555355] Write protecting the kernel read-only data: 1976k
[    5.578705] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    5.592235] udev[81]: starting version 163
[    5.711309] hub 1-1:1.0: USB hub found
[    5.711379] hub 1-1:1.0: 6 ports detected
[    5.810166] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.810184] atl1c 0000:01:00.0: setting latency timer to 64
[    5.815359] Linux agpgart interface v0.103
[    5.822666] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    5.851942] ACPI: Battery Slot [BAT0] (battery present)
[    5.855131] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    5.856353] agpgart-intel 0000:00:00.0: detected 131068K stolen memory, trimming to 32768K
[    5.957226] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    5.957269] ahci 0000:00:1f.2: version 3.0
[    5.957293]   alloc irq_desc for 19 on node -1
[    5.957297]   alloc kstat_irqs on node -1
[    5.957309] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.957369]   alloc irq_desc for 42 on node -1
[    5.957372]   alloc kstat_irqs on node -1
[    5.957387] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    5.957475] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[    5.957482] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst 
[    5.957491] ahci 0000:00:1f.2: setting latency timer to 64
[    5.957668] scsi0 : ahci
[    5.957972] scsi1 : ahci
[    5.958083] scsi2 : ahci
[    5.958189] scsi3 : ahci
[    5.958271] ata1: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405100 irq 42
[    5.958275] ata2: DUMMY
[    5.958277] ata3: DUMMY
[    5.958279] ata4: DUMMY
[    5.979515] atl1c 0000:01:00.0: version 1.0.0.2-NAPI
[    5.987631] hub 2-1:1.0: USB hub found
[    5.987759] hub 2-1:1.0: 8 ports detected
[    6.013345] [drm] Initialized drm 1.1.0 20060810
[    6.058673] usb 1-1.6: new high speed USB device using ehci_hcd and address 3
[    6.180996] Initializing USB Mass Storage driver...
[    6.181134] scsi4 : usb-storage 1-1.6:1.0
[    6.181262] usbcore: registered new interface driver usb-storage
[    6.181265] USB Mass Storage support registered.
[    6.262464] usb 2-1.2: new high speed USB device using ehci_hcd and address 3
[    6.274359] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    6.358003] scsi5 : usb-storage 2-1.2:1.0
[    6.430595] usb 2-1.5: new high speed USB device using ehci_hcd and address 4
[    7.181749] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    7.183820] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    7.189864] sd 4:0:0:0: [sda] Attached SCSI removable disk
[    7.359718] scsi 5:0:0:0: Direct-Access     Sony     Storage Media    1.00 PQ: 0 ANSI: 2
[    7.361063] sd 5:0:0:0: Attached scsi generic sg1 type 0
[    7.361774] sd 5:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[    7.362472] sd 5:0:0:0: [sdb] Write Protect is off
[    7.362478] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    7.362482] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    7.365218] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    7.365230]  sdb: sdb1
[    7.367442] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    7.367449] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[    7.507003] ata1.00: ATA-8: WDC WD3200BEVT-22A23T0, 01.01A01, max UDMA/133
[    7.507010] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    7.508946] ata1.00: configured for UDMA/133
[    7.522792] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-2 01.0 PQ: 0 ANSI: 5
[    7.523070] sd 0:0:0:0: Attached scsi generic sg2 type 0
[    7.523218] sd 0:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    7.524049] sd 0:0:0:0: [sdc] Write Protect is off
[    7.524060] sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    7.524410] sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.524676]  sdc: sdc1 sdc2 < sdc5 >
[    7.586526] sd 0:0:0:0: [sdc] Attached SCSI disk
[    7.632907] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.632916] i915 0000:00:02.0: setting latency timer to 64
[    7.671646] [drm] detected 127M stolen memory, trimming to 32M
[    7.672168]   alloc irq_desc for 43 on node -1
[    7.672173]   alloc kstat_irqs on node -1
[    7.672187] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    7.672203] [drm] set up 32M of stolen space
[    7.794559] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.165595] Skipping EDID probe due to cached edid
[    8.668171] Console: switching to colour frame buffer device 170x48
[    8.675978] fb0: inteldrmfb frame buffer device
[    8.675981] drm: registered panic notifier
[    8.675985] Slow work thread pool: Starting up
[    8.676223] Slow work thread pool: Ready
[    8.712013] acpi device:01: registered as cooling_device2
[    8.713531] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    8.713596] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.713642] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.925936] Skipping EDID probe due to cached edid
[    9.153477] Btrfs loaded
[    9.162793] xor: automatically using best checksumming function: pIII_sse
[    9.181581]    pIII_sse  :  3997.000 MB/sec
[    9.181585] xor: using function: pIII_sse (3997.000 MB/sec)
[    9.186686] device-mapper: dm-raid45: initialized v0.2594b
[    9.412296] aufs 2-standalone.tree-35-rcN-20100705
[    9.434491] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   14.986935] EXT3-fs: barriers not enabled
[   14.989030] kjournald starting.  Commit interval 5 seconds
[   14.989832] EXT3-fs (loop1): using internal journal
[   14.989884] EXT3-fs (loop1): mounted filesystem with ordered data mode
[   15.000080] aufs test_add:252:exe[737]: uid/gid/perm //filesystem.squashfs 0/0/0755, 1000/1000/0755
[   30.178781] Adding 6142972k swap on /dev/sdc5.  Priority:-1 extents:1 across:6142972k 
[   30.446912] udev[2549]: starting version 163
[   30.794729] intel ips 0000:00:1f.6: No CPUID match found.
[   30.794741] BUG: unable to handle kernel NULL pointer dereference at 00000008
[   30.794748] IP: [<f8072452>] ips_detect_cpu+0x62/0x180 [intel_ips]
[   30.794760] *pde = 6cb84067 
[   30.794765] Oops: 0000 [#1] SMP 
[   30.794770] last sysfs file: /sys/devices/platform/i8042/serio0/input/input3/name
[   30.794775] Modules linked in: intel_ips(+) snd_page_alloc squashfs aufs nls_iso8859_1 nls_cp437 vfat fat dm_raid45 xor btrfs zlib_deflate crc32c libcrc32c i915 drm_kms_helper usb_storage drm ahci libahci intel_agp atl1c i2c_algo_bit video agpgart output
[   30.794810] 
[   30.794816] Pid: 2659, comm: modprobe Not tainted 2.6.35-22-generic #33-Ubuntu Base Board Product Name/dot u
[   30.794822] EIP: 0060:[<f8072452>] EFLAGS: 00010286 CPU: 1
[   30.794828] EIP is at ips_detect_cpu+0x62/0x180 [intel_ips]
[   30.794833] EAX: 00580058 EBX: 00000000 ECX: 00580058 EDX: 00000000
[   30.794837] ESI: f4a5fe04 EDI: f490cb00 EBP: f4a5fe14 ESP: f4a5fde4
[   30.794841]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[   30.794845] Process modprobe (pid: 2659, ti=f4a5e000 task=f4a032c0 task.ti=f4a5e000)
[   30.794849] Stack:
[   30.794851]  f8073efc f8073e9e f7187710 f4a5fe14 c020c441 f4a5fe08 c05c7979 f8072eef
[   30.794861] <0> 00000000 f490cb00 f71d0800 fffffff4 f4a5fe4c f8072f2a c027165d f4a5fe4c
[   30.794871] <0> c0270c07 f4a5fe4c c027100a f4a5fe38 f71d0800 f71d0860 c036bb1e f71d0800
[   30.794883] Call Trace:
[   30.794897]  [<c020c441>] ? kmem_cache_alloc_notrace+0x91/0xb0
[   30.794908]  [<c05c7979>] ? mutex_lock+0x19/0x40
[   30.794915]  [<f8072eef>] ? ips_probe+0x1f/0x690 [intel_ips]
[   30.794922]  [<f8072f2a>] ? ips_probe+0x5a/0x690 [intel_ips]
[   30.794931]  [<c027165d>] ? sysfs_add_one+0x1d/0x110
[   30.794937]  [<c0270c07>] ? sysfs_new_dirent+0x67/0x100
[   30.794943]  [<c027100a>] ? sysfs_addrm_finish+0x1a/0xb0
[   30.794953]  [<c036bb1e>] ? pci_match_device+0xbe/0xd0
[   30.794960]  [<c036b9b3>] ? local_pci_probe+0x13/0x20
[   30.794965]  [<c036c968>] ? pci_device_probe+0x68/0x90
[   30.794972]  [<c0400550>] ? really_probe+0x50/0x150
[   30.794978]  [<c0407bc7>] ? pm_runtime_barrier+0x57/0xb0
[   30.794984]  [<c040068c>] ? driver_probe_device+0x3c/0x60
[   30.794990]  [<c0400731>] ? __driver_attach+0x81/0x90
[   30.794995]  [<c03ffb53>] ? bus_for_each_dev+0x53/0x80
[   30.795000]  [<c040041e>] ? driver_attach+0x1e/0x20
[   30.795005]  [<c04006b0>] ? __driver_attach+0x0/0x90
[   30.795011]  [<c03ffde5>] ? bus_add_driver+0xd5/0x280
[   30.795017]  [<c036c8a0>] ? pci_device_remove+0x0/0x40
[   30.795022]  [<c0400a2a>] ? driver_register+0x6a/0x130
[   30.795028]  [<c036cba5>] ? __pci_register_driver+0x45/0xb0
[   30.795035]  [<f8052017>] ? ips_init+0x17/0x19 [intel_ips]
[   30.795042]  [<c0101132>] ? do_one_initcall+0x32/0x1a0
[   30.795048]  [<f8052000>] ? ips_init+0x0/0x19 [intel_ips]
[   30.795058]  [<c0180c2b>] ? sys_init_module+0x9b/0x1e0
[   30.795067]  [<c0218fa2>] ? sys_write+0x42/0x70
[   30.795073]  [<c05c90a4>] ? syscall_call+0x7/0xb
[   30.795076] Code: 9e 0b c8 90 ba f5 3d 07 f8 b8 0c 52 81 c0 e8 86 76 2e c8 bb 80 44 07 f8 85 c0 74 35 b8 ac 01 00 00 89 f2 e8 b1 9e 0b c8 90 89 c1 <8b> 53 08 c1 e1 12 c1 e9 15 69 c1 e8 03 00 00 39 c2 75 75 89 d8 
[   30.795136] EIP: [<f8072452>] ips_detect_cpu+0x62/0x180 [intel_ips] SS:ESP 0068:f4a5fde4
[   30.795145] CR2: 0000000000000008
[   30.795150] ---[ end trace 13c1c6d39f0169b8 ]---
[   31.200567] cfg80211: Calling CRDA to update world regulatory domain
[   31.236085] acer-wmi: Acer Laptop ACPI-WMI Extras
[   31.245489] acer-wmi: Brightness must be controlled by generic video driver
[   31.272306] psmouse serio1: ID: 73 02 64
[   31.347369] Linux video capture interface: v2.00
[   31.381945] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[   31.392259] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5
[   31.392367] usbcore: registered new interface driver uvcvideo
[   31.392371] USB Video Class driver (v0.1.0)
[   31.598637] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   31.598657] ath9k 0000:02:00.0: setting latency timer to 64
[   31.719865]   alloc irq_desc for 44 on node -1
[   31.719874]   alloc kstat_irqs on node -1
[   31.719898] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
[   31.721185] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.795796] cfg80211: World regulatory domain updated:
[   31.795804]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   31.795809]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   31.795814]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   31.795819]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   31.795823]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   31.795827]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   32.044893] ath: EEPROM regdomain: 0x65
[   32.044899] ath: EEPROM indicates we should expect a direct regpair map
[   32.044905] ath: Country alpha2 being used: 00
[   32.044909] ath: Regpair used: 0x65
[   32.120129] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
[   32.233472] phy0: Selected rate control algorithm 'ath9k_rate_control'
[   32.234489] Registered led device: ath9k-phy0::radio
[   32.234523] Registered led device: ath9k-phy0::assoc
[   32.234551] Registered led device: ath9k-phy0::tx
[   32.234578] Registered led device: ath9k-phy0::rx
[   32.234589] phy0: Atheros AR9280 Rev:2 mem=0xf83a0000, irq=17
[   32.447050] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   34.579722] Skipping EDID probe due to cached edid
[   34.624442] Skipping EDID probe due to cached edid
[   38.313665] Skipping EDID probe due to cached edid
[   38.355611] Skipping EDID probe due to cached edid
[   38.399158] Skipping EDID probe due to cached edid
[   38.433767] Skipping EDID probe due to cached edid
[  210.599049] lp: driver loaded but no devices found
[  210.638685] ppdev: user-space parallel port driver
[  211.286446] Skipping EDID probe due to cached edid
[  214.954974] Skipping EDID probe due to cached edid
[  214.989670] Skipping EDID probe due to cached edid
[  216.204647] Skipping EDID probe due to cached edid
[  216.242489] Skipping EDID probe due to cached edid
[  216.287846] Skipping EDID probe due to cached edid
[  216.322129] Skipping EDID probe due to cached edid
[  216.541719] Skipping EDID probe due to cached edid
[  221.921224] Skipping EDID probe due to cached edid
[  515.330935] Skipping EDID probe due to cached edid
[  880.576403] usb 2-1.1: new high speed USB device using ehci_hcd and address 5
[  880.672397] scsi6 : usb-storage 2-1.1:1.0
[  881.673478] scsi 6:0:0:0: Direct-Access     G & T    USB Flash Drive  5.00 PQ: 0 ANSI: 2
[  881.674722] sd 6:0:0:0: Attached scsi generic sg3 type 0
[  881.675603] sd 6:0:0:0: [sdd] 7782400 512-byte logical blocks: (3.98 GB/3.71 GiB)
[  881.676971] sd 6:0:0:0: [sdd] Write Protect is off
[  881.676982] sd 6:0:0:0: [sdd] Mode Sense: 0b 00 00 08
[  881.676989] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[  881.680447] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[  881.680458]  sdd: sdd1
[  881.684321] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[  881.684331] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 1007.080121] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 1282.561284] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1303.497015] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 1764.485798] usb 2-1.1: USB disconnect, address 5
[ 1769.034885] usb 2-1.1: new high speed USB device using ehci_hcd and address 6
[ 1769.129764] scsi7 : usb-storage 2-1.1:1.0
[ 1770.132015] scsi 7:0:0:0: Direct-Access     G & T    USB Flash Drive  5.00 PQ: 0 ANSI: 2
[ 1770.133652] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 1770.134376] sd 7:0:0:0: [sdd] 7782400 512-byte logical blocks: (3.98 GB/3.71 GiB)
[ 1770.139480] sd 7:0:0:0: [sdd] Write Protect is off
[ 1770.139493] sd 7:0:0:0: [sdd] Mode Sense: 0b 00 00 08
[ 1770.139500] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 1770.141854] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 1770.141867]  sdd: sdd1
[ 1770.148351] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 1770.148360] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 1822.595975] wlan0: authenticate with 0e:58:1c:e3:d7:b8 (try 1)
[ 1822.598660] wlan0: authenticated
[ 1822.608433] wlan0: associate with 0e:58:1c:e3:d7:b8 (try 1)
[ 1822.630078] wlan0: RX AssocResp from 0e:58:1c:e3:d7:b8 (capab=0x411 status=0 aid=2)
[ 1822.630087] wlan0: associated
[ 1822.630598] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1833.372051] wlan0: no IPv6 routers present
[ 1838.438577] usb 2-1.1: USB disconnect, address 6
[ 1869.627931] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1869.713048] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 1869.716901] SGI XFS Quota Management subsystem
[ 1871.923182] NTFS driver 2.1.29 [Flags: R/O MODULE].
[ 1871.979712] QNX4 filesystem 0.2.3 registered.
[ 1872.448573] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 1894.219388] Adding 6142972k swap on /dev/sdc5.  Priority:-1 extents:1 across:6142972k 
[ 1979.374186] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 2434.097195] usb 2-1.1: new high speed USB device using ehci_hcd and address 7
[ 2434.201545] scsi8 : usb-storage 2-1.1:1.0
[ 2435.205659] scsi 8:0:0:0: Direct-Access     G & T    USB Flash Drive  5.00 PQ: 0 ANSI: 2
[ 2435.207282] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 2435.207950] sd 8:0:0:0: [sdd] 7782400 512-byte logical blocks: (3.98 GB/3.71 GiB)
[ 2435.208735] sd 8:0:0:0: [sdd] Write Protect is off
[ 2435.208742] sd 8:0:0:0: [sdd] Mode Sense: 0b 00 00 08
[ 2435.208747] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 2435.215213] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 2435.215225]  sdd: sdd1
[ 2435.218691] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 2435.218699] sd 8:0:0:0: [sdd] Attached SCSI removable disk

C'est très long, j'espère que tu sais où chercher (personnellement je n'y comprends rien).
En tout cas merci de bien vouloir m'aider, c'est gentil smile

Hors ligne

#8 Le 14/02/2011, à 13:52

Niltugor

Re : Problème NX Capabilities et écran noir après installation

Je me permets un petit up pour ne pas tomber dans l'oubli neutral

Hors ligne

#9 Le 22/04/2011, à 18:05

ahlan

Re : Problème NX Capabilities et écran noir après installation

Bonjour,

J'ai le même probleme suite à un passage du ubuntu 32bit à 64bit (mon ardinateurs est compatible 64 Bit) et lors de la partition j'ai coché  la case de formatage. Je pense que j'ai effacé tout les drivers. Je cherche encore si vous avez trouvé une solution aidez moi SVP. Merci.

Un lien pour problème similaire: http://www.commentcamarche.net/forum/af … #newanswer

Hors ligne