#1 Le 18/07/2006, à 11:11
- Xavos
Comment créer un dual screen ou desktop
bon voilà mon xorg.conf :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV36 [GeForce FX 5700LE]"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "17'' LCD"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV36 [GeForce FX 5700LE]"
Monitor "17'' LCD"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Je voudrait rajouter un écran compaq S710 :
Hrefresh 30.0-70
Vrefresh50.0-160.0
à gauche de mon écran par défaut poour faire un dual screen ou dual desktop.
Il faut le mieux (que ce soit compatible XGL)
Sachant que je ne veut pas que mon affichage soit étaller sur les duex moniteur.
Autrement dit pas de xinerama !
Hors ligne
#2 Le 18/07/2006, à 13:25
- Xavos
Re : Comment créer un dual screen ou desktop
Up !
Hors ligne
#3 Le 18/07/2006, à 17:05
- zouzou67
Re : Comment créer un dual screen ou desktop
Voici mon xorg j ai une 6600. Mon écran de pc reste tout a fait normal j ai juste une extention de bureau vers la gauche. Ce n est pas un écran mais une télé cepandant ça ne change rien
http://faul.pierre.free.fr/bureau/bureau8.jpg
http://faul.pierre.free.fr/bureau/bureau9.jpg
Section "Device"
Identifier "NVIDIA Corporation NV43 [GeForce Go 6600]"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "TwinView" "true"
Option "TwinViewOrientation" "RightOf"
Option "TVOutFormat" "COMPOSITE"
Option "TVStandard" "PAL-B"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1440x900,1024x768;1024x768,1024x768;800x600,800x600;640x480,640x480;512x384,512x384"
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-72
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV43 [GeForce Go 6600]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900"
EndSubSection
EndSection
pense a modifier le TwinWieworientation (man xorg) et a changer la liste des résolution d écran... prend modéle sur mon xorg ça à marcher du premier coup
au passage oubli pas non plus un
cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
Tiens nous au courant!
Hors ligne
#4 Le 18/07/2006, à 17:37
- Xavos
Re : Comment créer un dual screen ou desktop
Désolé j'obtiens la même chose qu'en employant le tuto présent dans le wiki :
Mon bureau est étalé sur les deux écran à la fois...
Je veut juste un extension à gauche ou un dual desktop
Hors ligne
#5 Le 18/07/2006, à 19:35
- zouzou67
Re : Comment créer un dual screen ou desktop
poste une impression d ecran de ce que tu as et met STP ton xorg aussi
Normalement y a si tu a reprit le meme xorg que moi ça devrai le faire. si il y a un probléme de sintillement d image essai avec PAL-N aussi moi j ai mis PAL-B parce que ça passai mieu sur ma télé
@ Plus
Hors ligne
#6 Le 18/07/2006, à 22:26
- Xavos
Re : Comment créer un dual screen ou desktop
Je n'utilise pas de TV mais un CRT Compaq S710 branché avec un adaptateur DVI-VGA.
Quand à la capture d'écran celle-ci correspond à un bureau normal.
j'était en 1280x1024 sur un écran et acev ces réglage jai du 1600 *1200 étalé sur les deux écran
Hors ligne
#7 Le 25/07/2006, à 12:16
- Xavos
Re : Comment créer un dual screen ou desktop
Up !
Hors ligne
#8 Le 25/07/2006, à 12:36
- michel2652
Re : Comment créer un dual screen ou desktop
Up !
Voici mon xorg.conf, bi-écran PC+TV
A adapter avec tes fréquences et résolutions.
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV34 [GeForce FX 5500]"
Driver "nvidia"
# Option "NoLogo"
#Option "NoDCC"
#Option "VideoOverlay" "on"
#Option "OpenGLOverlay" "on"
#Option "UseInternalAGPGART" "no"
Option "NvAGP" "3"
# Option "AllowGLXWithComposite" "True"
#Option "RenderAccel" "true"
#Option "Coolbits" "1"
VideoRam 131072
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV34 [GeForce FX 5500]1"
Driver "nvidia"
# Option "NoLogo"
#Option "NoDCC"
#Option "VideoOverlay" "on"
#Option "OpenGLOverlay" "on"
#Option "UseInternalAGPGART" "no"
Option "NvAGP" "3"
# Option "AllowGLXWithComposite" "True"
#Option "RenderAccel" "true"
#Option "Coolbits" "1"
VideoRam 131072
BusID "PCI:1:0:0"
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-N"
Option "ConnectedMonitor" "TV"
Screen 1
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "Hyundai L72S"
HorizSync 31-80
VertRefresh 56-75
Modeline "1280x1024_70.00" 128.94 1280 1368 1504 1728 1024 1025 1028 1066
EndSection
Section "Monitor"
Identifier "TV_Monitor"
VendorName "Samsung"
ModelName "PAL TV"
HorizSync 30.0 - 50.0
VertRefresh 60.0 - 60.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV34 [GeForce FX 5500]"
Monitor "Écran générique"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "TV"
Device "NVIDIA Corporation NV34 [GeForce FX 5500]1"
Monitor "TV_Monitor"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen"
Screen 1 "TV" RightOf "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
A+
#9 Le 25/07/2006, à 21:30
- Xavos
Re : Comment créer un dual screen ou desktop
Bon ! Première config qui ne fais pas planter X mais mon écran reste désepérément noir pourtant tout semble configuré ...:(
Voilà mon adaptation :
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV36 [GeForce FX 5700LE]"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV36 [GeForce FX 5700LE]"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-N"
Option "ConnectedMonitor" "CRT"
Screen 1
EndSection
Section "Monitor"
identifier "17'' LCD"
vendorname "Generic"
modelname "1280x1024 @ 76 Hz"
HorizSync 31.5-82
VertRefresh 50-90
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1152x768@54" 64.995 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
modeline "1280x854" 80.0 1280 1309 1460 1636 854 857 864 896 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
gamma 1.0
EndSection
Section "monitor" #
identifier "S710"
vendorname "Compaq"
modelname "Compaq S710 Color Monitor"
HorizSync 30.0-70.0
VertRefresh 50.0-160.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1152x768@54" 64.995 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
modeline "1280x854" 80.0 1280 1309 1460 1636 854 857 864 896 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV36 [GeForce FX 5700LE]"
Monitor "17'' LCD"
DefaultDepth 24
SubSection "Display"
depth 24
modes "1280x1024@75" "1280x960@60" "1280x854" "1280x1024@60" "1152x768@54" "1280x960@75" "1152x864@75" "1400x1050@60" "1024x768@43" "1400x1050@75" "1024x768@60" "1600x1200@65" "1024x768@70" "1600x1200@60" "1024x768@75" "1024x768@85" "832x624@75" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "Screen"
Identifier "S710"
Device "NVIDIA Corporation NV36 [GeForce FX 5700LE]"
Monitor "S710"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen"
Screen 1 "S710" Leftof "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
EndSection
Hors ligne
#10 Le 25/07/2006, à 21:39
- XioNoX
Re : Comment créer un dual screen ou desktop
donne des identifier différents entre tes 2 device
Dernière modification par XioNoX (Le 25/07/2006, à 21:42)
Hors ligne
#11 Le 25/07/2006, à 21:44
- michel2652
Re : Comment créer un dual screen ou desktop
Re, il faut différencier les CG (j'ai rajouter un 1 au nom de la 2ème dans le 2ème device et le 2ème screen.
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV36 [GeForce FX 5700LE]"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV36 [GeForce FX 5700LE]1" #OK rajouter le 1 pour 2ème CG
Driver "nvidia"
BusID "PCI:1:0:0"
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-N"
Option "ConnectedMonitor" "CRT"
Screen 1
EndSection
Section "Monitor"
identifier "17'' LCD"
vendorname "Generic"
modelname "1280x1024 @ 76 Hz"
HorizSync 31.5-82
VertRefresh 50-90
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1152x768@54" 64.995 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
modeline "1280x854" 80.0 1280 1309 1460 1636 854 857 864 896 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
gamma 1.0
EndSection
Section "monitor" #
identifier "S710"
vendorname "Compaq"
modelname "Compaq S710 Color Monitor"
HorizSync 30.0-70.0
VertRefresh 50.0-160.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1152x768@54" 64.995 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
modeline "1280x854" 80.0 1280 1309 1460 1636 854 857 864 896 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV36 [GeForce FX 5700LE]"
Monitor "17'' LCD"
DefaultDepth 24
SubSection "Display"
depth 24
modes "1280x1024@75" "1280x960@60" "1280x854" "1280x1024@60" "1152x768@54" "1280x960@75" "1152x864@75" "1400x1050@60" "1024x768@43" "1400x1050@75" "1024x768@60" "1600x1200@65" "1024x768@70" "1600x1200@60" "1024x768@75" "1024x768@85" "832x624@75" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "Screen"
Identifier "S710"
Device "NVIDIA Corporation NV36 [GeForce FX 5700LE]1" # rajouter le 1 pour 2ème CG
Monitor "S710"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen"
Screen 1 "S710" Leftof "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
EndSection
Beaucoup de Modelines ... Nécessaires ?
A+
#12 Le 28/07/2006, à 20:15
- Xavos
Re : Comment créer un dual screen ou desktop
Oui modelines nécéssaire pour le premier écran surtout PK ?
sinon j'ai rien compris ...:/
Dernière modification par Xavos (Le 28/07/2006, à 20:17)
Hors ligne
#13 Le 30/07/2006, à 20:03
- Xavos
Re : Comment créer un dual screen ou desktop
Up !
J'ai pas compris
j'ai rajouter un 1 au nom de la 2ème dans le 2ème device et le 2ème screen.
...:rolleyes:
Hors ligne
#14 Le 30/07/2006, à 20:53
- Xavos
Re : Comment créer un dual screen ou desktop
Si c'est bon g comris j'avais lu "Il faut rajouter" au lieu de "j'ai rajouté"
Bon désormais mon second écran est reconnu !
Mais il ya rien dessus il reste noir.
Lorsque je passe la souris sur celui-ci j'ai juste un curseur en forme de X (curseur de X)
Comment y mette un bureau ?
Hors ligne
#15 Le 30/07/2006, à 23:12
- Xavos
Re : Comment créer un dual screen ou desktop
Apprament le dual desktop fonctionnerais bien c'est xgl qui fout la merde.
Sur ma session normal sa fonctionne sauf le curseur quei reste bizzare "Certain paramètre visuel de gnome n'ont pu être chargé"
Encore une merde de xgl je pense ...
Hors ligne