#1 Le 19/06/2006, à 23:42
- Seb "enfin libre"
Ipod impossible à connecter en firewire sous dapper
Bonjour,
j'ai eu beau essayer les différentes méthodes trouvées sur le forum, impossible de monter ou auto monter mon ipod (2ème génération => uniquement en firewire) sous dapper ... Une idée ?
PS : avant j'y arrivais sous breezy mais je n'avais pas de disque S-ATA ... (disque qui occupe désormais l'emplacement sda2 utilisait par mon ipod sous breezy)
Hors ligne
#2 Le 20/06/2006, à 02:10
- 109
Re : Ipod impossible à connecter en firewire sous dapper
Que donne la commande dmesg après avoir branché ton iPod ?
Lorsque vous avez la solution, n'oubliez pas de passer votre sujet en [Résolu]
Dernier blogbutiement : Brad Sucks sur Jamendo !
Hors ligne
#3 Le 20/06/2006, à 19:10
- Seb "enfin libre"
Re : Ipod impossible à connecter en firewire sous dapper
voici ce que donne un dmesg :
[17179569.184000] Linux version 2.6.15-25-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Wed Jun 14 11:25:49 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f5350
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia ) @ 0x000f6dd0
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
[17179569.184000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7d80
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7d00
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:15 APIC version 16
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:90000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2211.586 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.296000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.296000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179569.316000] Memory: 1028816k/1048512k available (1976k kernel code, 18932k reserved, 606k data, 288k init, 131008k highmem)
[17179569.316000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.396000] Calibrating delay using timer specific routine.. 4427.46 BogoMIPS (lpj=8854923)
[17179569.396000] Security Framework v1.0.0 initialized
[17179569.396000] SELinux: Disabled at boot.
[17179569.396000] Mount-cache hash table entries: 512
[17179569.396000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179569.396000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179569.396000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.396000] CPU: L2 Cache: 512K (64 bytes/line)
[17179569.396000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179569.396000] mtrr: v2.0 (20020519)
[17179569.396000] CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 02
[17179569.396000] Enabling fast FPU save and restore... done.
[17179569.396000] Enabling unmasked SIMD FPU exception support... done.
[17179569.396000] Checking 'hlt' instruction... OK.
[17179569.412000] checking if image is initramfs... it is
[17179569.848000] Freeing initrd memory: 6613k freed
[17179569.856000] ACPI: Looking for DSDT ... not found!
[17179569.860000] ENABLING IO-APIC IRQs
[17179569.860000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179570.004000] NET: Registered protocol family 16
[17179570.004000] EISA bus registered
[17179570.004000] ACPI: bus type pci registered
[17179570.004000] PCI: PCI BIOS revision 3.00 entry at 0xfb6e0, last bus=5
[17179570.004000] PCI: Using MMCONFIG
[17179570.004000] ACPI: Subsystem revision 20051216
[17179570.012000] ACPI: Interpreter enabled
[17179570.012000] ACPI: Using IOAPIC for interrupt routing
[17179570.012000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.012000] PCI: Probing PCI hardware (bus 00)
[17179570.012000] PCI: Transparent bridge - 0000:00:09.0
[17179570.012000] Boot video device is 0000:05:00.0
[17179570.012000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.064000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179570.068000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179570.068000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179570.068000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179570.068000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179570.068000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179570.068000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179570.068000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179570.068000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[17179570.068000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[17179570.068000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179570.068000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[17179570.068000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[17179570.068000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179570.068000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179570.068000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[17179570.072000] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[17179570.072000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[17179570.076000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[17179570.076000] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[17179570.076000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.076000] pnp: PnP ACPI init
[17179570.080000] pnp: PnP ACPI: found 14 devices
[17179570.080000] PnPBIOS: Disabled by ACPI PNP
[17179570.080000] PCI: Using ACPI for IRQ routing
[17179570.080000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.104000] pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
[17179570.104000] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
[17179570.104000] pnp: 00:00: ioport range 0x1400-0x147f has been reserved
[17179570.104000] pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
[17179570.104000] pnp: 00:00: ioport range 0x1800-0x187f has been reserved
[17179570.104000] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
[17179570.104000] PCI: Bridge: 0000:00:09.0
[17179570.104000] IO window: disabled.
[17179570.104000] MEM window: f3000000-f30fffff
[17179570.104000] PREFETCH window: disabled.
[17179570.104000] PCI: Bridge: 0000:00:0b.0
[17179570.104000] IO window: a000-afff
[17179570.104000] MEM window: disabled.
[17179570.104000] PREFETCH window: disabled.
[17179570.104000] PCI: Bridge: 0000:00:0c.0
[17179570.104000] IO window: 9000-9fff
[17179570.104000] MEM window: disabled.
[17179570.104000] PREFETCH window: disabled.
[17179570.104000] PCI: Bridge: 0000:00:0d.0
[17179570.104000] IO window: 8000-8fff
[17179570.104000] MEM window: disabled.
[17179570.104000] PREFETCH window: disabled.
[17179570.104000] PCI: Bridge: 0000:00:0e.0
[17179570.104000] IO window: disabled.
[17179570.104000] MEM window: f0000000-f2ffffff
[17179570.104000] PREFETCH window: e0000000-efffffff
[17179570.104000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[17179570.104000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[17179570.104000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[17179570.104000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[17179570.104000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[17179570.104000] audit: initializing netlink socket (disabled)
[17179570.104000] audit(1150822766.104:1): initialized
[17179570.104000] highmem bounce pool size: 64 pages
[17179570.104000] VFS: Disk quotas dquot_6.5.1
[17179570.104000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.104000] Initializing Cryptographic API
[17179570.104000] io scheduler noop registered
[17179570.104000] io scheduler anticipatory registered
[17179570.104000] io scheduler deadline registered
[17179570.104000] io scheduler cfq registered
[17179570.104000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[17179570.104000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179570.104000] assign_interrupt_mode Found MSI capability
[17179570.104000] Allocate Port Service[pcie00]
[17179570.104000] Allocate Port Service[pcie03]
[17179570.104000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[17179570.104000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179570.104000] assign_interrupt_mode Found MSI capability
[17179570.104000] Allocate Port Service[pcie00]
[17179570.104000] Allocate Port Service[pcie03]
[17179570.104000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[17179570.104000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179570.104000] assign_interrupt_mode Found MSI capability
[17179570.104000] Allocate Port Service[pcie00]
[17179570.104000] Allocate Port Service[pcie03]
[17179570.104000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[17179570.104000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179570.104000] assign_interrupt_mode Found MSI capability
[17179570.104000] Allocate Port Service[pcie00]
[17179570.104000] Allocate Port Service[pcie03]
[17179570.104000] isapnp: Scanning for PnP cards...
[17179570.460000] isapnp: No Plug & Play device found
[17179570.468000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179570.472000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.472000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.472000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179570.472000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.472000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.472000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.472000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.472000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.472000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.472000] mice: PS/2 mouse device common for all mice
[17179570.472000] EISA: Probing bus 0 at eisa.0
[17179570.472000] Cannot allocate resource for EISA slot 1
[17179570.472000] Cannot allocate resource for EISA slot 8
[17179570.472000] EISA: Detected 0 cards.
[17179570.472000] NET: Registered protocol family 2
[17179570.496000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179570.516000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.516000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179570.516000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.516000] TCP: Hash tables configured (established 262144 bind 65536)
[17179570.516000] TCP reno registered
[17179570.516000] TCP bic registered
[17179570.516000] NET: Registered protocol family 1
[17179570.516000] NET: Registered protocol family 8
[17179570.516000] NET: Registered protocol family 20
[17179570.516000] Using IPI Shortcut mode
[17179570.516000] ACPI wakeup devices:
[17179570.516000] HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1
[17179570.516000] ACPI: (supports S0 S1 S4 S5)
[17179570.516000] Freeing unused kernel memory: 288k freed
[17179570.552000] vga16fb: initializing
[17179570.552000] vga16fb: mapped to 0xc00a0000
[17179570.752000] Console: switching to colour frame buffer device 80x25
[17179570.752000] fb0: VGA16 VGA frame buffer device
[17179571.820000] Capability LSM initialized
[17179572.416000] SCSI subsystem initialized
[17179572.416000] ACPI: bus type scsi registered
[17179572.416000] libata version 1.20 loaded.
[17179572.416000] sata_nv 0000:00:07.0: version 0.8
[17179572.416000] **** SET: Misaligned resource pointer: df882a02 Type 07 Len 0
[17179572.416000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[17179572.416000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
[17179572.416000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[17179572.416000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 217
[17179572.416000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 217
[17179572.620000] ata1: no device found (phy stat 00000000)
[17179572.620000] scsi0 : sata_nv
[17179572.988000] ata2: dev 0 cfg 00:0040 49:2f00 82:7c6b 83:7f09 84:4773 85:7c68 86:3e01 87:4763 88:407f 93:0000
[17179572.988000] ata2: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48
[17179572.988000] sata_get_dev_handle: SATA dev addr=0x70000, handle=0xdffea420
[17179572.996000] nv_sata: Primary device added
[17179572.996000] nv_sata: Primary device removed
[17179572.996000] nv_sata: Secondary device added
[17179572.996000] nv_sata: Secondary device removed
[17179572.996000] ata2: dev 0 configured for UDMA/133
[17179572.996000] sata_get_dev_handle: SATA dev addr=0x70000, handle=0xdffea420
[17179573.004000] scsi1 : sata_nv
[17179573.004000] Vendor: ATA Model: Maxtor 6V200E0 Rev: VA11
[17179573.004000] Type: Direct-Access ANSI SCSI revision: 05
[17179573.004000] **** SET: Misaligned resource pointer: df882802 Type 07 Len 0
[17179573.004000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[17179573.004000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225
[17179573.004000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[17179573.004000] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xE800 irq 225
[17179573.004000] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xE808 irq 225
[17179573.008000] Driver 'sd' needs updating - please use bus_type methods
[17179573.008000] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
[17179573.008000] SCSI device sda: drive cache: write back
[17179573.012000] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
[17179573.012000] SCSI device sda: drive cache: write back
[17179573.012000] sda: sda1 sda2 sda3
[17179573.040000] sd 1:0:0:0: Attached scsi disk sda
[17179573.208000] ata3: no device found (phy stat 00000000)
[17179573.208000] scsi2 : sata_nv
[17179573.412000] ata4: no device found (phy stat 00000000)
[17179573.412000] scsi3 : sata_nv
[17179573.412000] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[17179573.412000] NFORCE-CK804: chipset revision 242
[17179573.412000] NFORCE-CK804: not 100% native mode: will probe irqs later
[17179573.412000] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
[17179573.412000] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
[17179573.412000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[17179573.412000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[17179573.412000] Probing IDE interface ide0...
[17179574.148000] hda: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive
[17179574.932000] hdb: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
[17179574.988000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.000000] Probing IDE interface ide1...
[17179575.288000] hdc: Maxtor 6L160P0, ATA DISK drive
[17179575.964000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.000000] hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
[17179576.000000] Uniform CD-ROM driver Revision: 3.20
[17179576.000000] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
[17179576.020000] hdc: max request size: 1024KiB
[17179576.020000] hdc: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133)
[17179576.024000] hdc: cache flushes supported
[17179576.024000] hdc: hdc1 hdc2 < hdc5 hdc6 >
[17179576.308000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48.
[17179576.308000] **** SET: Misaligned resource pointer: dfa7cac2 Type 07 Len 0
[17179576.308000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[17179576.308000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 233
[17179576.308000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[17179576.364000] ieee1394: Initialized config rom entry `ip1394'
[17179576.380000] usbcore: registered new driver usbfs
[17179576.384000] usbcore: registered new driver hub
[17179576.384000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179576.384000] **** SET: Misaligned resource pointer: dfa7c4c2 Type 07 Len 0
[17179576.384000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[17179576.384000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 50
[17179576.384000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179576.384000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179576.384000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179576.384000] ohci_hcd 0000:00:02.0: irq 50, io mem 0xf3102000
[17179576.440000] hub 1-0:1.0: USB hub found
[17179576.440000] hub 1-0:1.0: 10 ports detected
[17179576.544000] **** SET: Misaligned resource pointer: dfa7c1c2 Type 07 Len 0
[17179576.544000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[17179576.544000] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 217
[17179576.544000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179576.544000] ehci_hcd 0000:00:02.1: EHCI Host Controller
[17179576.544000] ehci_hcd 0000:00:02.1: debug port 1
[17179576.544000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[17179576.544000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[17179576.544000] ehci_hcd 0000:00:02.1: irq 217, io mem 0xfeb00000
[17179576.544000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.544000] hub 2-0:1.0: USB hub found
[17179576.544000] hub 2-0:1.0: 10 ports detected
[17179576.832000] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0[17179576.832000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[17179576.832000] **** SET: Misaligned resource pointer: dfb1ce02 Type 07 Len 0
[17179576.832000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[17179576.832000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 58
[17179576.880000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[58] MMIO=[f3004000-f30047ff] Max Packet=[4096]
[17179576.960000] Attempting manual resume
[17179576.972000] kjournald starting. Commit interval 5 seconds
[17179576.972000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.192000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0016e65600b1b044]
[17179583.744000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[17179584.884000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179584.896000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179585.128000] Real Time Clock Driver v1.12
[17179585.132000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[17179585.132000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[17179585.432000] input: PC Speaker as /class/input/input1
[17179585.484000] Floppy drive(s): fd0 is 1.44M
[17179585.504000] Linux agpgart interface v0.101 (c) Dave Jones
[17179585.520000] nvidia: module license 'NVIDIA' taints kernel.
[17179585.520000] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 58
[17179585.520000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[17179585.520000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15 13:06:38 PDT 2006
[17179585.724000] logips2pp: Detected unknown logitech mouse model 85
[17179585.780000] FDC 0 is a post-1991 82077
[17179585.796000] **** SET: Misaligned resource pointer: f7e804c2 Type 07 Len 0
[17179585.800000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[17179585.800000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225
[17179585.800000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179585.808000] irda_init()
[17179585.808000] NET: Registered protocol family 23
[17179585.812000] NET: Registered protocol family 17
[17179586.120000] intel8x0_measure_ac97_clock: measured 54741 usecs
[17179586.120000] intel8x0: clocking to 46921
[17179586.236000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[17179586.276000] ts: Compaq touchscreen protocol output
[17179586.408000] parport: PnPBIOS parport detected.
[17179586.408000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[17179586.840000] lp0: using parport0 (interrupt-driven).
[17179586.864000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179586.864000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179586.864000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179586.912000] Adding 1044216k swap on /dev/sda2. Priority:-1 extents:1 across:1044216k
[17179587.064000] EXT3 FS on sda1, internal journal
[17179587.196000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179587.196000] md: bitmap version 4.39
[17179587.968000] NET: Registered protocol family 10
[17179587.968000] lo: Disabled Privacy Extensions
[17179587.968000] IPv6 over IPv4 tunneling driver
[17179588.056000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179588.416000] cdrom: open failed.
[17179588.780000] cdrom: open failed.
[17179588.796000] cdrom: open failed.
[17179589.268000] kjournald starting. Commit interval 5 seconds
[17179589.268000] EXT3 FS on sda3, internal journal
[17179589.268000] EXT3-fs: mounted filesystem with ordered data mode.
[17179589.284000] kjournald starting. Commit interval 5 seconds
[17179589.284000] EXT3 FS on hdc6, internal journal
[17179589.284000] EXT3-fs: mounted filesystem with ordered data mode.
[17179594.716000] ACPI: Power Button (FF) [PWRF]
[17179594.716000] ACPI: Power Button (CM) [PWRB]
[17179594.792000] ibm_acpi: ec object not found
[17179594.816000] pcc_acpi: loading...
[17179595.280000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[17179595.280000] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6 (1400 mV)
[17179595.280000] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[17179595.280000] cpu_init done, current fid 0xe, vid 0x6
[17179598.380000] eth0: no IPv6 routers present
[17179599.116000] ppdev: user-space parallel port driver
[17179599.332000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179599.332000] apm: overridden by ACPI.
[17179601.944000] Bluetooth: Core ver 2.8
[17179601.944000] NET: Registered protocol family 31
[17179601.944000] Bluetooth: HCI device and connection manager initialized
[17179601.944000] Bluetooth: HCI socket layer initialized
[17179601.952000] Bluetooth: L2CAP ver 2.8
[17179601.952000] Bluetooth: L2CAP socket layer initialized
[17179601.964000] Bluetooth: RFCOMM socket layer initialized
[17179601.964000] Bluetooth: RFCOMM TTY layer initialized
[17179601.964000] Bluetooth: RFCOMM ver 1.7Hors ligne
#4 Le 21/06/2006, à 20:59
- Seb "enfin libre"
Re : Ipod impossible à connecter en firewire sous dapper
Pas d'idée ? 
Hors ligne
#5 Le 24/06/2006, à 20:42
- Seb "enfin libre"
Re : Ipod impossible à connecter en firewire sous dapper
up ! 
Hors ligne
#6 Le 26/06/2006, à 11:10
- totof
Re : Ipod impossible à connecter en firewire sous dapper
Salut.
Ca m'a tout l'air d'être le même problème que moi!
http://forum.ubuntu-fr.org/viewtopic.php?id=45161
Pas de réponse pour l'instant.
Cependant, j'ai testé avec d'autres live cd, mon port fonctionne, c'est donc soft...
A plus.
Hors ligne
#7 Le 26/06/2006, à 11:17
- Seb "enfin libre"
Re : Ipod impossible à connecter en firewire sous dapper
totof a écrit :
Salut.
Ca m'a tout l'air d'être le même problème que moi!
http://forum.ubuntu-fr.org/viewtopic.php?id=45161Pas de réponse pour l'instant.
Cependant, j'ai testé avec d'autres live cd, mon port fonctionne, c'est donc soft...
A plus.
Effectivement le pb a l'air similaire, tiens j'essayerai avec le live CD de breezy pour voir ... Histoire d'être sûr que cela vienne pas de ma config matérielle !
Merci
A+
Hors ligne
#8 Le 26/06/2006, à 21:15
- totof
Re : Ipod impossible à connecter en firewire sous dapper
Moi, j'ai pris une knoppix live, et pas des plus récente. Pas de problèmes, ca fonctionne sans problème, en firewire comme en usb.
Hors ligne
#9 Le 16/07/2006, à 19:23
- Seb "enfin libre"
Re : Ipod impossible à connecter en firewire sous dapper
totof a écrit :
Moi, j'ai pris une knoppix live, et pas des plus récente. Pas de problèmes, ca fonctionne sans problème, en firewire comme en usb.
Ben j'ai essayé sous breezy avec un CD Live, et je n'y arrive pas non plus ...
mon pb doit être différent du tien ! (un pb matériel ?)
Hors ligne
#10 Le 29/08/2006, à 18:32
- Seb "enfin libre"
Re : Ipod impossible à connecter en firewire sous dapper
up 
Hors ligne
#11 Le 13/09/2006, à 19:43
- Seb "enfin libre"
Re : Ipod impossible à connecter en firewire sous dapper
Ca y est c'est résolu !
C'était un pb hardware : j'avais une vieille carte PCI Firewire, je l'ai branché, et là mon ipod est reconnu dès que je le branche ...
Pq le port firewire de ma carte mère ne marche pas, lui ? ça c'est une autre histoire !
Hors ligne