Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 02/07/2005, à 00:29

LR

Carte graphique : installeur ATI : erreurs

Salut,

Je viens de lancer l'installer que j'ai téléchargé sur le site de ATI pour ma Radeon 9200 SE : ati-driver-installer-8.14.13.run

J'ai suivi la procédure d'installation et un nouveau xorg.conf a été généré.

Lorsque j'ai redémarré le serveur X, j'ai eu un écran bleu avec des erreurs que je n'ai pas comprises.

Est-ce que quelqu'un serait assez bon pour jeter un coup d'oeil à ce fichier et me dire ce qu'il y a d'anormal ?

Merci d'avance
Lilian

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
#   sudo dpkg-reconfigure xserver-xorg

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"type1"
	Load	"vbe"
EndSection

Section "Extensions"
   Option "RENDER" "Enable"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"ch"
	Option		"XkbOptions"	"fr"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon 9200 SE (RV280)"
	Driver		"radeon"
	BusID		"PCI:1:0:0"
	Option         "AGPMode" "4"
	Option         "AGPSize" "64" # default: 8
	Option         "RingSize" "8"
	Option         "BufferSize" "2"
	Option         "EnablePageFlip" "true"
	Option         "EnableDepthMoves" "true"
	Option         "RenderAccel" "true"
EndSection

Section "Monitor"
	Identifier	"Écran générique"
	Option		"DPMS"
	HorizSync	30-65
	VertRefresh	50-75
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon 9200 SE (RV280)"
	Monitor		"Écran générique"
	DefaultDepth	24	
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

#2 Le 02/07/2005, à 00:40

Stemp

Re : Carte graphique : installeur ATI : erreurs

J'ai suivi la procédure d'installation et un nouveau xorg.conf a été généré.

Ton xorg utilise le driver radeon et pas le driver fglrx, c'est très étrange si tu as généré un nouveau xorg.conf hmm


«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

Hors ligne

#3 Le 03/07/2005, à 01:37

LR

Re : Carte graphique : installeur ATI : erreurs

Oups désolé, je me suis trompé de fichier...
Voici le fichier généré :

# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:

#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc101"
    Option "XkbLayout"	"fr_CH"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver "mouse"
    Option "Protocol"   "MouseManPlusPS/2"
    Option "Device"     "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31.5 - 80.5
    VertRefresh 60 - 75
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode 
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


Section "Monitor"
    Identifier  "Monitor1"
    HorizSync   31.5 - 80.5
    VertRefresh 60 - 75
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode 
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000200" 
    Option "MonitorLayout"              "TMDS, CRT"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "31.5 - 80.5" 
    Option "VRefresh2"                  "60 - 75" 
    Option "ScreenOverlap"              "0" 
# === TV-out Management ===
    Option "NoTV"                       "no"     
    Option "TVStandard"                 "PAL-B"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=5964
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

#4 Le 03/07/2005, à 10:21

Stemp

Re : Carte graphique : installeur ATI : erreurs

J'avoue ne pas voir d'erreur, essaie plutôt de regarder du côté des erreurs dans la log :
/var/log/Xorg.0.log


«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

Hors ligne

#5 Le 03/07/2005, à 11:20

LR

Re : Carte graphique : installeur ATI : erreurs

Merci pour ton aide,

Ci-dessous le fichier Xorg.0.log généré lors d'une tentative de démarrage du serveur X avec le driver ATI.

J'ai remarqué les dernières lignes et plus particulièrement :

(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work

J'ai trouvé http://wiki.ubuntu-fr.org/materiel/ati une "explication" et j'ai tenté la commande sudo apt-get install linux-restricted-modules-$(uname -r) mais en retour j'ai eu :

linux-restricted-modules-2.6.10-5-amd64-generic est déjà la plus récente version disponible.

J'espère que quelqu'un pourra m'aider à regler ce problème car avec le driver "radeon", l'image est bonne mais certains économiseurs d'écran en 3D, l'animation est saccadée et avec Enemy Territory c'est encore pire.

Merci d'avance
Lilian

X Window System Version 6.8.2 (Ubuntu 6.8.2-10 20050405154247 root@)
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.10 x86_64 [ELF] 
Current Operating System: Linux lilian 2.6.10-5-amd64-generic #1 Fri Jun 24 16:54:18 UTC 2005 x86_64
Build Date: 05 April 2005
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.10-5-amd64-generic (buildd@yellow) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 Fri Jun 24 16:54:18 UTC 2005 
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul  3 11:06:55 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.7
	X.Org XInput driver : 0.4
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0282 card 1043,80a3 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1282 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2282 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3282 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4282 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7282 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,3044 card 1043,808a rev 80 class 0c,00,10 hdr 00
(II) PCI: 00:08:0: chip 105a,3373 card 1043,80f5 rev 02 class 01,04,00 hdr 00
(II) PCI: 00:0a:0: chip 11ab,4320 card 1043,811a rev 13 class 02,00,00 hdr 00
(II) PCI: 00:0c:0: chip 1131,7134 card 11bd,002b rev 01 class 04,80,00 hdr 00
(II) PCI: 00:0d:0: chip 12b9,1007 card 12b9,00c4 rev 00 class 07,80,00 hdr 00
(II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1043,80ed rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1043,80ed rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1043,812a rev 60 class 04,01,00 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,5964 card 17af,2012 rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5d44 card 17af,2013 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:0:1), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:0:2), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:0:3), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:0:4), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:0:7), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000e000 - 0x0000efff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xfbd00000 - 0xfbffffff (0x300000) MX[b]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xe8000000 - 0xfaffffff (0x13000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:0), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:1), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:2), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:3), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5964) rev 1, Mem @ 0xe8000000/27, 0xfbe00000/16, I/O @ 0xe000/8, BIOS @ 0xfbd00000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x5d44) rev 1, Mem @ 0xf0000000/27, 0xfbf00000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[b]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[b](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xfbc00000 - 0xfbc000ff (0x100) MX[b]
	[1] -1	0	0xe7d00000 - 0xe7d07fff (0x8000) MX[b]
	[2] -1	0	0xe7e00000 - 0xe7e0ffff (0x10000) MX[b]
	[3] -1	0	0xe7f00000 - 0xe7f0003f (0x40) MX[b]
	[4] -1	0	0xfba00000 - 0xfba003ff (0x400) MX[b]
	[5] -1	0	0xfb900000 - 0xfb903fff (0x4000) MX[b]
	[6] -1	0	0xfb600000 - 0xfb61ffff (0x20000) MX[b]
	[7] -1	0	0xfb700000 - 0xfb700fff (0x1000) MX[b]
	[8] -1	0	0xfb500000 - 0xfb5007ff (0x800) MX[b]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[10] -1	0	0xfbf00000 - 0xfbf0ffff (0x10000) MX[b](B)
	[11] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
	[12] -1	0	0xfbd00000 - 0xfbd1ffff (0x20000) MX[b](B)
	[13] -1	0	0xfbe00000 - 0xfbe0ffff (0x10000) MX[b](B)
	[14] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
	[15] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[b]
	[16] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[b]
	[17] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[b]
	[18] -1	0	0x0000c800 - 0x0000c81f (0x20) IX[b]
	[19] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[b]
	[20] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[21] -1	0	0x0000a400 - 0x0000a4ff (0x100) IX[b]
	[22] -1	0	0x0000a800 - 0x0000a80f (0x10) IX[b]
	[23] -1	0	0x0000b000 - 0x0000b003 (0x4) IX[b]
	[24] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[25] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[26] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[b]
	[27] -1	0	0x0000a000 - 0x0000a03f (0x40) IX[b]
	[28] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[29] -1	0	0x00008800 - 0x0000887f (0x80) IX[b]
	[30] -1	0	0x00009000 - 0x0000900f (0x10) IX[b]
	[31] -1	0	0x00009400 - 0x0000943f (0x40) IX[b]
	[32] -1	0	0x00008400 - 0x0000847f (0x80) IX[b]
	[33] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xfbc00000 - 0xfbc000ff (0x100) MX[b]
	[1] -1	0	0xe7d00000 - 0xe7d07fff (0x8000) MX[b]
	[2] -1	0	0xe7e00000 - 0xe7e0ffff (0x10000) MX[b]
	[3] -1	0	0xe7f00000 - 0xe7f0003f (0x40) MX[b]
	[4] -1	0	0xfba00000 - 0xfba003ff (0x400) MX[b]
	[5] -1	0	0xfb900000 - 0xfb903fff (0x4000) MX[b]
	[6] -1	0	0xfb600000 - 0xfb61ffff (0x20000) MX[b]
	[7] -1	0	0xfb700000 - 0xfb700fff (0x1000) MX[b]
	[8] -1	0	0xfb500000 - 0xfb5007ff (0x800) MX[b]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[10] -1	0	0xfbf00000 - 0xfbf0ffff (0x10000) MX[b](B)
	[11] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
	[12] -1	0	0xfbd00000 - 0xfbd1ffff (0x20000) MX[b](B)
	[13] -1	0	0xfbe00000 - 0xfbe0ffff (0x10000) MX[b](B)
	[14] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
	[15] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[b]
	[16] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[b]
	[17] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[b]
	[18] -1	0	0x0000c800 - 0x0000c81f (0x20) IX[b]
	[19] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[b]
	[20] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[21] -1	0	0x0000a400 - 0x0000a4ff (0x100) IX[b]
	[22] -1	0	0x0000a800 - 0x0000a80f (0x10) IX[b]
	[23] -1	0	0x0000b000 - 0x0000b003 (0x4) IX[b]
	[24] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[25] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[26] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[b]
	[27] -1	0	0x0000a000 - 0x0000a03f (0x40) IX[b]
	[28] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[29] -1	0	0x00008800 - 0x0000887f (0x80) IX[b]
	[30] -1	0	0x00009000 - 0x0000900f (0x10) IX[b]
	[31] -1	0	0x00009400 - 0x0000943f (0x40) IX[b]
	[32] -1	0	0x00008400 - 0x0000847f (0x80) IX[b]
	[33] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[b](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]

(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[b](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[5] -1	0	0xfbc00000 - 0xfbc000ff (0x100) MX[b]
	[6] -1	0	0xe7d00000 - 0xe7d07fff (0x8000) MX[b]
	[7] -1	0	0xe7e00000 - 0xe7e0ffff (0x10000) MX[b]
	[8] -1	0	0xe7f00000 - 0xe7f0003f (0x40) MX[b]
	[9] -1	0	0xfba00000 - 0xfba003ff (0x400) MX[b]
	[10] -1	0	0xfb900000 - 0xfb903fff (0x4000) MX[b]
	[11] -1	0	0xfb600000 - 0xfb61ffff (0x20000) MX[b]
	[12] -1	0	0xfb700000 - 0xfb700fff (0x1000) MX[b]
	[13] -1	0	0xfb500000 - 0xfb5007ff (0x800) MX[b]
	[14] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[15] -1	0	0xfbf00000 - 0xfbf0ffff (0x10000) MX[b](B)
	[16] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
	[17] -1	0	0xfbd00000 - 0xfbd1ffff (0x20000) MX[b](B)
	[18] -1	0	0xfbe00000 - 0xfbe0ffff (0x10000) MX[b](B)
	[19] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[21] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[22] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[b]
	[23] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[b]
	[24] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[b]
	[25] -1	0	0x0000c800 - 0x0000c81f (0x20) IX[b]
	[26] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[b]
	[27] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[28] -1	0	0x0000a400 - 0x0000a4ff (0x100) IX[b]
	[29] -1	0	0x0000a800 - 0x0000a80f (0x10) IX[b]
	[30] -1	0	0x0000b000 - 0x0000b003 (0x4) IX[b]
	[31] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[32] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[33] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[b]
	[34] -1	0	0x0000a000 - 0x0000a03f (0x40) IX[b]
	[35] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[36] -1	0	0x00008800 - 0x0000887f (0x80) IX[b]
	[37] -1	0	0x00009000 - 0x0000900f (0x10) IX[b]
	[38] -1	0	0x00009400 - 0x0000943f (0x40) IX[b]
	[39] -1	0	0x00008400 - 0x0000847f (0x80) IX[b]
	[40] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.8.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  No symbols found
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 6.8.0, module version = 8.14.13
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
	RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
	MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
	RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
	RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
	MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
	FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
	RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
	RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
	RADEON 9600 PRO (RV360 4152),
	MOBILITY RADEON 9600/9700 (M10/M11 4E50), RADEON 9500 (R300 4144),
	RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
	RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
	RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
	RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
	FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
	RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
	FireGL X2-256/X2-256t (R350 4E4B),
	MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
	RADEON X600 (RV380 5B62), FireGL V3100 (RV370 5B64),
	MOBILITY RADEON X300 (M22 5460), MOBILITY FireGL V3100 (M22 5464),
	RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
	MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
	MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
	RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
	RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
	FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
	RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
	RADEON X800 PRO (R423 5549),
	RADEON X800 XT Platinum Edition (R423 554A),
	RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
	FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
	MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
	RADEON X800 XL (R430 554D), RADEON X800 (R430 554F),
	RADEON X850 XT Platinum Edition (R480 5D4D),
	RADEON X850 PRO (R480 5D4F), RADEON X850 XT (R480 5D52),
	MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
	FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
	RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
	RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
	RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
	MOBILITY RADEON X700 (M26 5653), RADEON 9100 IGP (RS300 5834),
	RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
	MOBILITY RADEON 9000/9100 IGP (RS300M 5835)
(II) Primary Device is: PCI 01:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON 9200 SE (RV280 5964) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[b](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[5] -1	0	0xfbc00000 - 0xfbc000ff (0x100) MX[b]
	[6] -1	0	0xe7d00000 - 0xe7d07fff (0x8000) MX[b]
	[7] -1	0	0xe7e00000 - 0xe7e0ffff (0x10000) MX[b]
	[8] -1	0	0xe7f00000 - 0xe7f0003f (0x40) MX[b]
	[9] -1	0	0xfba00000 - 0xfba003ff (0x400) MX[b]
	[10] -1	0	0xfb900000 - 0xfb903fff (0x4000) MX[b]
	[11] -1	0	0xfb600000 - 0xfb61ffff (0x20000) MX[b]
	[12] -1	0	0xfb700000 - 0xfb700fff (0x1000) MX[b]
	[13] -1	0	0xfb500000 - 0xfb5007ff (0x800) MX[b]
	[14] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[15] -1	0	0xfbf00000 - 0xfbf0ffff (0x10000) MX[b](B)
	[16] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
	[17] -1	0	0xfbd00000 - 0xfbd1ffff (0x20000) MX[b](B)
	[18] -1	0	0xfbe00000 - 0xfbe0ffff (0x10000) MX[b](B)
	[19] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[21] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[22] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[b]
	[23] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[b]
	[24] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[b]
	[25] -1	0	0x0000c800 - 0x0000c81f (0x20) IX[b]
	[26] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[b]
	[27] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[28] -1	0	0x0000a400 - 0x0000a4ff (0x100) IX[b]
	[29] -1	0	0x0000a800 - 0x0000a80f (0x10) IX[b]
	[30] -1	0	0x0000b000 - 0x0000b003 (0x4) IX[b]
	[31] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[32] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[33] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[b]
	[34] -1	0	0x0000a000 - 0x0000a03f (0x40) IX[b]
	[35] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[36] -1	0	0x00008800 - 0x0000887f (0x80) IX[b]
	[37] -1	0	0x00009000 - 0x0000900f (0x10) IX[b]
	[38] -1	0	0x00009400 - 0x0000943f (0x40) IX[b]
	[39] -1	0	0x00008400 - 0x0000847f (0x80) IX[b]
	[40] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x71a800
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[b](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[5] -1	0	0xfbc00000 - 0xfbc000ff (0x100) MX[b]
	[6] -1	0	0xe7d00000 - 0xe7d07fff (0x8000) MX[b]
	[7] -1	0	0xe7e00000 - 0xe7e0ffff (0x10000) MX[b]
	[8] -1	0	0xe7f00000 - 0xe7f0003f (0x40) MX[b]
	[9] -1	0	0xfba00000 - 0xfba003ff (0x400) MX[b]
	[10] -1	0	0xfb900000 - 0xfb903fff (0x4000) MX[b]
	[11] -1	0	0xfb600000 - 0xfb61ffff (0x20000) MX[b]
	[12] -1	0	0xfb700000 - 0xfb700fff (0x1000) MX[b]
	[13] -1	0	0xfb500000 - 0xfb5007ff (0x800) MX[b]
	[14] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[15] -1	0	0xfbf00000 - 0xfbf0ffff (0x10000) MX[b](B)
	[16] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
	[17] -1	0	0xfbd00000 - 0xfbd1ffff (0x20000) MX[b](B)
	[18] -1	0	0xfbe00000 - 0xfbe0ffff (0x10000) MX[b](B)
	[19] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
	[20] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b]
	[21] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b]
	[22] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b]
	[23] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[24] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[25] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[b]
	[26] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[b]
	[27] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[b]
	[28] -1	0	0x0000c800 - 0x0000c81f (0x20) IX[b]
	[29] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[b]
	[30] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[31] -1	0	0x0000a400 - 0x0000a4ff (0x100) IX[b]
	[32] -1	0	0x0000a800 - 0x0000a80f (0x10) IX[b]
	[33] -1	0	0x0000b000 - 0x0000b003 (0x4) IX[b]
	[34] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[35] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[36] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[b]
	[37] -1	0	0x0000a000 - 0x0000a03f (0x40) IX[b]
	[38] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[39] -1	0	0x00008800 - 0x0000887f (0x80) IX[b]
	[40] -1	0	0x00009000 - 0x0000900f (0x10) IX[b]
	[41] -1	0	0x00009400 - 0x0000943f (0x40) IX[b]
	[42] -1	0	0x00008400 - 0x0000847f (0x80) IX[b]
	[43] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b](B)
	[44] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b]
	[45] 0	0	0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000200"
(**) fglrx(0): Option "MonitorLayout" "TMDS, CRT"
(**) fglrx(0): Option "HSync2" "31.5 - 80.5"
(**) fglrx(0): Option "VRefresh2" "60 - 75"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "no"
(**) fglrx(0): Option "TVStandard" "PAL-B"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9200 SE (RV280 5964)" (Chipset = 0x5964)
(--) fglrx(0): (PciSubVendor = 0x17af, PciSubDevice = 0x2012)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe8000000
(--) fglrx(0): MMIO registers at 0xfbe00000
(--) fglrx(0): ROM-BIOS at 0xfbd00000
(--) fglrx(0): ChipExtRevID = 0x01
(--) fglrx(0): ChipIntRevID = 0x00
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit DDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS -------- 
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(**) fglrx(0): MonitorLayout Option: 
	Monitor1--Type TMDS, Monitor2--Type CRT

(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1
(II) fglrx(0): Primary head:
 Monitor   -- TMDS
 Connector -- DVI-I
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- Internal
 DDC Type  -- DVI_DDC
(II) fglrx(0): Secondary head:
 Monitor   -- CRT
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) fglrx(0): EDID data from the display on Secondary head ---------------------------
(II) fglrx(0): Manufacturer: BNQ  Model: 763f  Serial#: 215
(II) fglrx(0): Year: 2003  Week: 53
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync:  Separate  Composite
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) fglrx(0): Gamma: 2.22
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) fglrx(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) fglrx(0): #3: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Monitor name: BenQ FP791
(II) fglrx(0): Serial No: 
(II) fglrx(0): Ranges: V min: 56  V max: 75 Hz, H min: 31  H max: 81 kHz, PixClock max 140 MHz
(II) fglrx(0): 
(**) fglrx(0):  Screen Overlap 0 pixel
(II) fglrx(0): DesktopSetup 0x0002
(**) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Overlay disabled
(==) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Validating mode for clone (secondary) head ------------
(II) fglrx(0): Total 1 valid mode(s) found.
(--) fglrx(0): Virtual size is 640x480 (pitch 640)
(**) fglrx(0): *Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(II) fglrx(0): Valid Clone Mode: 640x480
(II) fglrx(0): Total of 1 clone modes found ------------

(II) fglrx(0): Validating modes on Primary head ---------
(II) fglrx(0): Monitor0: Using hsync range of 31.50-80.50 kHz
(II) fglrx(0): Monitor0: Using vrefresh range of 60.00-75.00 Hz
(II) fglrx(0): Clock range:  20.00 to 165.00 MHz
(II) fglrx(0): Not using default mode "640x350" (vrefresh out of range)
(II) fglrx(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "640x400" (vrefresh out of range)
(II) fglrx(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "720x400" (vrefresh out of range)
(II) fglrx(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "640x480" (vrefresh out of range)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "800x600" (vrefresh out of range)
(II) fglrx(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "800x600" (vrefresh out of range)
(II) fglrx(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1024x768" (vrefresh out of range)
(II) fglrx(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1280x960" (hsync out of range)
(II) fglrx(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1280x1024" (hsync out of range)
(II) fglrx(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1152x768" (vrefresh out of range)
(II) fglrx(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1152x864" (vrefresh out of range)
(II) fglrx(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1400x1050" (hsync out of range)
(II) fglrx(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1440x900" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1280x960" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1280x800" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1152x864" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1280x768" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1024x768" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1024x768" (width too large for virtual size)
(II) fglrx(0): Not using default mode "1024x768" (width too large for virtual size)
(II) fglrx(0): Not using default mode "832x624" (width too large for virtual size)
(II) fglrx(0): Not using default mode "800x600" (width too large for virtual size)
(II) fglrx(0): Not using default mode "800x600" (width too large for virtual size)
(II) fglrx(0): Not using default mode "800x600" (width too large for virtual size)
(--) fglrx(0): Virtual size is 1280x480 (pitch 1280)
(**) fglrx(0): *Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(==) fglrx(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
Skipping "/usr/X11R6/lib/modules/libfb.a:fbmmx.o":  No symbols found
(II) Module fb: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 6.8.0, module version = 8.14.13
	ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000001f
(**) fglrx(0): cpuSpeedMHz: 0x0000070a
(==) fglrx(0): OpenGL ClientDriverName: "atiogl_a_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xfbe00000 - 0xfbe0ffff (0x10000) MX[b]
	[1] 0	0	0xe8000000 - 0xefffffff (0x8000000) MX[b]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[b](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[7] -1	0	0xfbc00000 - 0xfbc000ff (0x100) MX[b]
	[8] -1	0	0xe7d00000 - 0xe7d07fff (0x8000) MX[b]
	[9] -1	0	0xe7e00000 - 0xe7e0ffff (0x10000) MX[b]
	[10] -1	0	0xe7f00000 - 0xe7f0003f (0x40) MX[b]
	[11] -1	0	0xfba00000 - 0xfba003ff (0x400) MX[b]
	[12] -1	0	0xfb900000 - 0xfb903fff (0x4000) MX[b]
	[13] -1	0	0xfb600000 - 0xfb61ffff (0x20000) MX[b]
	[14] -1	0	0xfb700000 - 0xfb700fff (0x1000) MX[b]
	[15] -1	0	0xfb500000 - 0xfb5007ff (0x800) MX[b]
	[16] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[17] -1	0	0xfbf00000 - 0xfbf0ffff (0x10000) MX[b](B)
	[18] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
	[19] -1	0	0xfbd00000 - 0xfbd1ffff (0x20000) MX[b](B)
	[20] -1	0	0xfbe00000 - 0xfbe0ffff (0x10000) MX[b](B)
	[21] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
	[22] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b]
	[23] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b]
	[24] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b]
	[25] 0	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[26] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[27] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[28] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[b]
	[29] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[b]
	[30] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[b]
	[31] -1	0	0x0000c800 - 0x0000c81f (0x20) IX[b]
	[32] -1	0	0x0000c400 - 0x0000c41f (0x20) IX[b]
	[33] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[34] -1	0	0x0000a400 - 0x0000a4ff (0x100) IX[b]
	[35] -1	0	0x0000a800 - 0x0000a80f (0x10) IX[b]
	[36] -1	0	0x0000b000 - 0x0000b003 (0x4) IX[b]
	[37] -1	0	0x0000b400 - 0x0000b407 (0x8) IX[b]
	[38] -1	0	0x0000b800 - 0x0000b803 (0x4) IX[b]
	[39] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[b]
	[40] -1	0	0x0000a000 - 0x0000a03f (0x40) IX[b]
	[41] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[42] -1	0	0x00008800 - 0x0000887f (0x80) IX[b]
	[43] -1	0	0x00009000 - 0x0000900f (0x10) IX[b]
	[44] -1	0	0x00009400 - 0x0000943f (0x40) IX[b]
	[45] -1	0	0x00008400 - 0x0000847f (0x80) IX[b]
	[46] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b](B)
	[47] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b]
	[48] 0	0	0x000003c0 - 0x000003df (0x20) IS[b]
(II) fglrx(0): UMM area:     0xe8459000 (size=0x07ba7000)
(II) fglrx(0): driver needs X.org 6.8.x
(II) fglrx(0): detected X.org 6.8.2
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) fglrx(0): [drm] DRM interface version 1.2
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xffffff0000082000
(II) fglrx(0): [drm] mapped SAREA 0xffffff0000082000 to 0x2a9557e000
(II) fglrx(0): [drm] framebuffer handle = 0xe8000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: radeon
(II) fglrx(0):     Version: 1.14.0
(II) fglrx(0):     Date: 20050125
(II) fglrx(0):     Desc: ATI Radeon
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xffffff0000082000 at 0x2a9557e000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xe8000000 FBMappedSize: 0x08000000

Fatal server error:
AddScreen/ScreenInit failed for driver 0


Please consult the The X.Org Foundation support 
	 at http://wiki.X.Org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

#6 Le 03/07/2005, à 11:27

Stemp

Re : Carte graphique : installeur ATI : erreurs

Regarde dans /lib/modules si tu as bien un répertoire fglrx (avec dedans un fichier fglrx.ko)
Ça ca devrait être le bon fichier.


«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

Hors ligne

#7 Le 03/07/2005, à 12:31

LR

Re : Carte graphique : installeur ATI : erreurs

J'ai bien un dossier fglrx mais dedans je n'ai pas de fglrx.ko, seulement un dossier build_mod et make_install.sh...

#8 Le 03/07/2005, à 12:44

Stemp

Re : Carte graphique : installeur ATI : erreurs

Le module n'a pas été compilé sad

Récupére les paquets linux-headers-xxx (xxx a remplacer selon ta version installée) et build-essential

Ensuite sudo sh make_install.sh


«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

Hors ligne