Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".

#1 Le 04/07/2005, à 00:37

LR

Enemy territory TRES TRES lent

Salut,

Après quelques périgrinations, j'ai réussi à faire marcher la 3D de ma carte graphique :
ATI Radeon 9200 SE

Lorsque je fais

glxgears

je vois des rouages tourner très vite (ça ralenti quand je met la souris sur la croix pour fermer la fenêtre) et dans la console :

3462 frames in 5.0 seconds = 692.400 FPS
7435 frames in 5.0 seconds = 1487.000 FPS
7521 frames in 5.0 seconds = 1504.200 FPS
3774 frames in 5.0 seconds = 754.800 FPS
3084 frames in 5.0 seconds = 616.800 FPS

Lorsque je fais

fgl_glxgears

je vois les mêmes rouages mais dans un cube qui tourne et dans la console :

796 frames in 5.0 seconds = 159.200 FPS
1173 frames in 5.0 seconds = 234.600 FPS
978 frames in 5.0 seconds = 195.600 FPS
889 frames in 5.0 seconds = 177.800 FPS
1158 frames in 5.0 seconds = 231.600 FPS
1160 frames in 5.0 seconds = 232.000 FPS
1120 frames in 5.0 seconds = 224.000 FPS

Les économiseurs d'écran fonctionnent tous bien.

Lorsque je lance "et", le jeux ne se lance pas et je vois

***********************************************************
 You are using software Mesa (no hardware acceleration)!
 Driver DLL used: libGL.so.1
 If this is intentional, add
       "+set r_allowSoftwareGL 1"
 to the command line when starting the game.
***********************************************************

dans la console...

Lorsque je lance

et +set r_allowSoftwareGL 1

le jeu se lance mais dès que j'arrive dans le menu principal, tout est hyper lent, je dois même m'y reprendre à plusieurs fois pour parvenir à cliquer sur "quitter" tellement le mouvement de la souris est saccadé...

Je suis sur un AMD 64 3000+ et voici mon /etc/X11/xorg.conf,
merci d'avance
Lilian

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
#   sudo dpkg-reconfigure xserver-xorg

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
#	Load	"extmod"
	SubSection "extmod"
		Option	"omit xfree86-dga"	
	EndSubSection
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"type1"
	Load	"vbe"
EndSection

Section "Extensions"
   Option "RENDER" "Enable"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"ch"
	Option		"XkbOptions"	"fr"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon 9200 SE (RV280)"
	Driver		"fglrx"
	Option		"UseInternalAGPGART" "no"
#	Option		"OpenGLOverlay"		"off"
	Option		"VideoOverlay"		"on"
#	Driver		"radeon"
	BusID		"PCI:1:0:0"
	Option         "AGPMode" "4"
	Option         "AGPSize" "64" # default: 8
	Option         "RingSize" "8"
	Option         "BufferSize" "2"
	Option         "EnablePageFlip" "true"
	Option         "EnableDepthMoves" "true"
	Option         "RenderAccel" "true"
EndSection

Section "Monitor"
	Identifier	"Écran générique"
	Option		"DPMS"
	HorizSync	30-65
	VertRefresh	50-75
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon 9200 SE (RV280)"
	Monitor		"Écran générique"
	DefaultDepth	24	
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

Haut de page ↑