Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 11/07/2005, à 09:57

dudie

Sortie tv

Bonjour.
J'ai trouver grace a vous de activer ma sortie TV avec une carte graphique ATI Radeon 9700.
Quand je lance un film sur l'écran de la tv, j'ai des ligne vertes sur l'écran de mon pc, la le problème a été résoulu. Mais maintenant que j'ai du configurer le xorg pour avoir une image sur ma télé, mon pc ne démarre plus sans. Je présise, Quand mon cable S-video est branché mon pc démarre normallement, mais quand je démarre mon portable autrepart mais sans le S-video branché, j'ai un signal que mon xserver est mal configuré.

Ma question est comment configuré mon xorg pour je peux regarder des film sur la télé mais quand le cable S-video n'est pas branché que mon pc démarre normalement.

Merci d'avance
dudie

#2 Le 11/07/2005, à 21:10

dudie

Re : Sortie tv

je présise,

quand j'allume mon pc avec la tv brancher c'est nicel
mais quand j'allume mon pc sans la tv c'est pas bien du tout.
Dans l'ereure que j'optiends, c'est que xorg ne retrouve pas mon deuxième écran.


fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!

Hors ligne

#3 Le 11/07/2005, à 21:38

ShaLouZa

Re : Sortie tv

dudie a écrit :

J'ai trouver grace a vous de activer ma sortie TV avec une carte graphique ATI Radeon 9700.

Salut

Tu peux me dire quels drivers tu utilises et comment tu as activé la sortie s-vidéo stp ? smile


«D'abord ils vous ignorent, puis ils rient de vous, puis ils vous combattent, puis vous gagnez.» Gandhi

Hors ligne

#4 Le 12/07/2005, à 08:10

dudie

Re : Sortie tv

http://forum.ubuntu-fr.org/viewtopic.php?id=3902

voilà le topic que j'ai suivi pour faire appareitre un écran sur la tv.


fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!

Hors ligne

#5 Le 12/07/2005, à 08:14

dudie

Re : Sortie tv

J'ai utiliser fglrx. pour les driver ati. Je les ai installer via Synaptic
J'éspère que je tes aidé.
a+


fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!

Hors ligne

#6 Le 12/07/2005, à 08:45

dudie

Re : Sortie tv

n'existe-t-il pas de commande au démarrage pour dire si on veut activer la sortie tv ou pas.


fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!

Hors ligne

#7 Le 12/07/2005, à 08:48

dudie

Re : Sortie tv

Pour ceux quil veut activer la sortie tv. (S-video)
je vous donne mon xorg

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
#   sudo dpkg-reconfigure xserver-xorg

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
#	Load	"extmod"
	SubSection "extmod"
		Option "omit xfree86-dga"
	EndSubSection
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"be"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection
Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option		"HorizScrollDelta"	"0"
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
	Driver		"fglrx"
	BusID		"PCI:1:0:0"
	Option        "NoTV" "no"
# === disable/enable XAA/DRI ===
    	Option        "no_accel" "no"
    	Option        "no_dri" "no"
# === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    	Option        "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    	Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    	Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    	Option "PseudoColorVisuals"         "off"
# === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
# === FSAA Management ===
        Option "FSAAEnable"                 "no"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "no"
        Option "ForceGenericCPU"            "no"
        Option "mtrr"                       "off"
#
    screen 0
EndSection

Section "Device"
    Identifier    "ATI_tvout"
    Driver        "fglrx"
    Option        "VideoOverlay" "on"
    BusID        "PCI:1:0:0"
    Option        "NoTV" "no"
    screen 1
Option "DesktopSetup" "0x00000000"
    # === disable/enable XAA/DRI ===
        Option "no_accel"                   "no"
        Option "no_dri"                     "no"
    # === TV-out Management ===
        Option "NoTV"                       "no"     
    #Option "CursorShadow" "1"
    Option "TVStandard" "PAL-N"
    Option "ConnectedMonitor" "TV"
    Option "TVOutFormat" "Composite"
    Option "TVHSizeAdj"                 "-10"     
        Option "TVVSizeAdj"                 "20"     
        Option "TVHPosAdj"                  "15"     
        Option "TVVPosAdj"                  "0"
    #Option "VideoOverlay" "on"     
        Option "TVHStartAdj"                "0"     
        Option "TVColorAdj"                 "0"     
        Option "GammaCorrectionI"           "0x06419064"
        Option "GammaCorrectionII"          "0x06419064"
    # === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
    # === Video Overlay for the Xv extension ===
        Option "VideoOverlay"               "on"
    # === OpenGL Overlay ===
    # Note: When OpenGL Overlay is enabled, Video Overlay
    #       will be disabled automatically
        Option "OpenGLOverlay"              "off"
    # === Center Mode (Laptops only) ===
        Option "CenterMode"                 "off"
    # === Pseudo Color Visuals (8-bit visuals) ===
        Option "PseudoColorVisuals"         "off"
    # === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
    # === FSAA Management ===
        Option "FSAAEnable"                 "no"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
    # === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "no"
        Option "ForceGenericCPU"            "no"
        Option "mtrr"                       "off"
EndSection


Section "Monitor"
	Identifier	"Intel"
	Option		"DPMS"
EndSection
Section "Monitor"
    Identifier "MaTv"
    HorizSync 30.0-50.0
    VertRefresh 50.0-60.0
EndSection

Section "Screen"
	Identifier	"ecran_principal"
	Device		"ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
	Monitor		"Intel"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1400x1050"
	EndSubSection
EndSection
Section "Screen"
    Identifier "ecran_TV"
    Device "ATI_tvout"
    Monitor "MaTv"
    DefaultColorDepth 24
    Subsection "Display"
        Modes "800x600" "Interlace"
        Depth 24
    EndSubsection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"ecran_principal"
	Screen		"ecran_TV" RightOf "ecran_principal"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice	"Synaptics Touchpad"
EndSection

Section "DRI"
	Mode	0666
EndSection

Dernière modification par dudie (Le 02/08/2005, à 16:09)


fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!

Hors ligne

#8 Le 30/07/2005, à 23:28

alta_ir

Re : Sortie tv

Bonjour,

ma sortie TV (sur ati radeon 9200se) est activée et fonctionne.

Le seul pb c'est que je n'arrive pas à regarder un film sur la tv, l'image s'affiche sur mon ecran mais sur la tv j ai une image noir...

Pour palier à ce pb lors du fglrxconfig je definnissais ma tv en primary screen et ça fonctionnait.
Mais Je ne sais pas pourquoi maintenant ce ne marche plus :
         je n'ai plus d'écran normal.
         Les films donnent aussi une image noir sur la TV bien qu elle soit en primary.

Je ne comprends pas ce qui c'est passé.

Si vous avez une idee?

ps :j'ai installé le driver 8.14.13 du site d'ati

Hors ligne

#9 Le 31/07/2005, à 09:21

dudie

Re : Sortie tv

salut alta_ir, tu pourrais me donné ton xorg, stp

Moi, je peux regarder mes film sur la tv quand je veux maintenant.
Quand je travaille avec mon pc portable uniquement, le server x me mais un problème. Alors la je fais un
sudo cp -r /home/dudie/xorg/one/xorg.conf /etc/X11/xorg.conf
Cette commande me copie mon xorg.conf que j'ai fais pour un pc uni, dans son répertoire. Après plus de problème.
Quand je démarre avec ma tv branché, j'ai un écran sur les deux.
A ce moment la, je longue le curseur de la souris sur l'autre écran et fait un clic droit. Ouvrir un terminal et tape vlc
je sélectionne mon film et up c'est parti.

PS: Désoller pour mon français!


fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!

Hors ligne

#10 Le 31/07/2005, à 11:58

alta_ir

Re : Sortie tv

Je suis en mode clone.

Voici mon xorg.
j'ai déjà essayé de bidouiller en prenant des éléments du tien, mais c vraiment trop hasardeux pour moi...

# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xorg"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"	"xorg"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"fr"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31.5 - 60.0
    VertRefresh 60 - 75
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode 
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


Section "Monitor"
    Identifier  "Monitor1"
    HorizSync   31.5 - 60.0
    VertRefresh 60 - 75
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode 
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000100" 
    Option "MonitorLayout"              "CRT, STV"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "31.5 - 60.0" 
    Option "VRefresh2"                  "60 - 75" 
    Option "ScreenOverlap"              "0" 
# === TV-out Management ===
    Option "NoTV"                       "no"     
    Option "TVStandard"                 "PAL-N"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:2:0:0"    # vendor=1002, device=5964
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

Dernière modification par alta_ir (Le 19/08/2005, à 12:33)

Hors ligne

#11 Le 31/07/2005, à 12:02

alta_ir

Re : Sortie tv

c est mon xorg qd mon ecran est defini en principal ds fglrxconfig et ma tv en secondaire en mode clone.

Mais les films ne passent que sur mon ecran principal pas sur la TV.

Hors ligne

#12 Le 31/07/2005, à 21:40

dudie

Re : Sortie tv

bisarre ça, alors moi je préfère avoir deux écrans diff.
un du pc et l'autre de la tv que je lance vlc dans un terminal.


fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!

Hors ligne

#13 Le 31/07/2005, à 23:25

alta_ir

Re : Sortie tv

Tu utilises le mode dual donc?

Moi je n'ai jamais réussi à le faire fonctionner... j'obtiens deux ecrans noirs... sad
C'est klr que ce mode la est plus intéressant puisqu'on peut travailler à côté.

Mais je ne sais le faire fonctionner.

Hors ligne

#14 Le 01/08/2005, à 09:50

dudie

Re : Sortie tv

oui alta_ir fait le même xorg comme moi,
alors tu aura un ecran à droite de ton écran pc.
Tu bouge ton curseur de ta souris juste quand il n'apparait plus sur ton écran pc et normallement tu verras, le curseur son ta tv.
enfin chez moi

PS: ton xorg trop complex avec des ajout de commantères.

Change le tiens avec les section devices,monitor,screen,... mais ne change pas les section input devices.

Moi pour arriver a mon xorg actuelle, j'ai suivi un autre topic sur le forum


fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!

Hors ligne

#15 Le 01/08/2005, à 12:12

alta_ir

Re : Sortie tv

j'ai essayé de suivre l'autre topic, mais je n'y suis pas arrivé...

J'avais même copié ton xorg à la place du mien. mais j'au eu un écran bleu lol...

Hors ligne

#16 Le 01/08/2005, à 12:37

briisovan

Re : Sortie tv

Hum, j'ai tout comme vous installé les fglrx "and Co". J'ai remanié le xorg.conf. Etc...
Essayez, pour afficher vos films sur vos téléviseurs, de lancer VLC ainsi :
"Applications"->"Lancer une application..."  Dans le champ, mettez ceci :
vlc --alsadev hw:1,0 --vout x11 --x11-display :0.1 --fullscreen --no-wxwin-embed
Ensuite, glisser le film voulu dans la fenêtre VLC. Si votre configuration est bonne, vous devriez avoir le film, en plein écran, uniquement sur la télévision.
On ne sait jamais, cela ne venait peut-être que de cela. smile


Ozos.


sudo dpkg-reconfigure alsa-source, and say no to PnP, yes to debug, and choose the ca0106 driver
"Le paquet « alsa-source, » n'est pas installé et aucune information n'est disponible.
[...]
/usr/sbin/dpkg-reconfigure: alsa-source, n'est pas installé".  ^^

Hors ligne

#17 Le 01/08/2005, à 12:46

sksbir

Re : Sortie tv

Attention, cette derniere commande ne fonctionne qu'avec le mode "dual display" : Deux fenetres X11.

Pour tester, lancer un client X11 basique:
xclock (par exemple)
fermez l'horloge , puis
xclock -display :0.1
là, l'horloge doit apparaitre sur le 2eme écran.
Si ça n'est pas le cas, c'est qu'il n'y a qu'un écran X11 défini : vous etes en mode clone , ou peut-etre en mode xinerama...

Hors ligne

#18 Le 01/08/2005, à 12:57

briisovan

Re : Sortie tv

Oups, merci de m'avoir corrigé smile


sudo dpkg-reconfigure alsa-source, and say no to PnP, yes to debug, and choose the ca0106 driver
"Le paquet « alsa-source, » n'est pas installé et aucune information n'est disponible.
[...]
/usr/sbin/dpkg-reconfigure: alsa-source, n'est pas installé".  ^^

Hors ligne

#19 Le 01/08/2005, à 13:51

dudie

Re : Sortie tv

oui sksbir tu avais fait un post avec la commande vlc
moi je clic droit sur l'écrand de la tv
j'ouvre vlc en terminal, s'électionne mon film mais en plein écran, et la pas de problème. Content comme ça

alta_ir as-tu copier totallement mon xorg?
copie simplement les données a copier

tiens je t'aide:

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
#	Load	"extmod"
	SubSection "extmod"
	Option	"omit xfree86-dga"
	EndSubSection
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"type1"
	Load	"vbe"
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
	Driver		"fglrx"
	Option "UseInternalAGPGART" "no"
	BusID		"PCI:1:0:0"
  Option        "NoTV" "no"
# === disable/enable XAA/DRI ===
    Option        "no_accel" "no"
    Option        "no_dri" "no"
# === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option        "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
# === FSAA Management ===
        Option "FSAAEnable"                 "no"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "no"
        Option "ForceGenericCPU"            "no"
        Option "mtrr"                       "off"
#
    screen 0
EndSection
Section "Device"
    Identifier    "ATI_tvout"
    Driver        "fglrx"
    Option        "VideoOverlay" "on"
    BusID        "PCI:1:0:0"
    Option        "NoTV" "no"
    screen 1
Option "DesktopSetup" "0x00000000"
    # === disable/enable XAA/DRI ===
        Option "no_accel"                   "no"
        Option "no_dri"                     "no"
    # === TV-out Management ===
        Option "NoTV"                       "no"     
    #Option "CursorShadow" "1"
    Option "TVStandard" "PAL-N"
    Option "ConnectedMonitor" "TV"
    Option "TVOutFormat" "Composite"
    Option "TVHSizeAdj"                 "-10"     
        Option "TVVSizeAdj"                 "20"     
        Option "TVHPosAdj"                  "15"     
        Option "TVVPosAdj"                  "0"
    #Option "VideoOverlay" "on"     
        Option "TVHStartAdj"                "0"     
        Option "TVColorAdj"                 "0"     
        Option "GammaCorrectionI"           "0x06419064"
        Option "GammaCorrectionII"          "0x06419064"
    # === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
    # === Video Overlay for the Xv extension ===
        Option "VideoOverlay"               "on"
    # === OpenGL Overlay ===
    # Note: When OpenGL Overlay is enabled, Video Overlay
    #       will be disabled automatically
        Option "OpenGLOverlay"              "off"
    # === Center Mode (Laptops only) ===
        Option "CenterMode"                 "off"
    # === Pseudo Color Visuals (8-bit visuals) ===
        Option "PseudoColorVisuals"         "off"
    # === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
    # === FSAA Management ===
        Option "FSAAEnable"                 "no"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
    # === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "no"
        Option "ForceGenericCPU"            "no"
        Option "mtrr"                       "off"
EndSection

Section "Monitor"
	Identifier	"Écran générique"
	Option		"DPMS"
EndSection
Section "Monitor"
    Identifier "MaTv"
    HorizSync 30.0-50.0
    VertRefresh 50.0-60.0
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
	Monitor		"Écran générique"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1400x1050"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1400x1050"
	EndSubSection
EndSection
Section "Screen"
    Identifier "ecran_TV"
    Device "ATI_tvout"
    Monitor "MaTv"
    DefaultColorDepth 24
    Subsection "Display"
        Modes "800x600" "Interlace"
        Depth 24
    EndSubsection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	Screen		"ecran_TV" Below "Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice	"Generic Mouse"
	InputDevice	"Synaptics Touchpad"
EndSection

Section "DRI"
	Mode	0666
EndSection

mais ce qu'il ne faut pas oublier, c'est de regarder la résolution du pc!!
moi je suis sur un portable, ma résolution est diff que sur un desktop

ne change pas les metamodes de ton pc avec les metamodes de mon portables!!
salut

Dernière modification par dudie (Le 02/08/2005, à 16:08)


fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!

Hors ligne

#20 Le 01/08/2005, à 14:13

sksbir

Re : Sortie tv

@dudie : si tu pouvais rééditer tes réponses en encadrant tes exemples de fichiers xorg avec les balises [ code] et [ /code] (sans mettre d'espaces  entre le crochet et le c de code), ça rendrait le topic beaucoups plus lisible smile

Meme remarque pour alta_ir : utilise la balise CODE, plutot que la balide QUOTE...


Sinon, pour VLC, c'est comme ça que j'ai fait... au début hein, parce que choisir le film dans nautilus sur l'écran de la TV relevait de l'exploit sportif...( c'est carrément illisible sur une TV.. me demande comment tu fais tongue)

Dernière modification par sksbir (Le 01/08/2005, à 14:17)

Hors ligne

#21 Le 02/08/2005, à 08:03

dudie

Re : Sortie tv

merci sksbir, je voulais savoir comment on fesait ça, mais je ne le savait pas. merci


fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!

Hors ligne

#22 Le 02/08/2005, à 14:05

sksbir

Re : Sortie tv

dudie a écrit :

merci sksbir, je voulais savoir comment on fesait ça, mais je ne le savait pas. merci

Pas de quoi.... .. donc, yapuka!

Clique sur le bouton "modifier" en bas de tes messages, et fait la modif proposée...  wink

Hors ligne

#23 Le 02/08/2005, à 16:10

dudie

Re : Sortie tv

voilà a vaut ordres mon seigneur?

J'adore apprendre


fait gaffe !!! parce-que linux fracas
et Ubuntu ? Ça tue !!

Hors ligne

#24 Le 11/08/2005, à 21:47

alta_ir

Re : Sortie tv

dudie a écrit :

alta_ir as-tu copier totallement mon xorg?
copie simplement les données a copier

bon je viens juste de faire les modifs je redemarre et je vois ce que ca donne.
j 'ai bien modifie la resolution.

Hors ligne

#25 Le 12/08/2005, à 17:52

alta_ir

Re : Sortie tv

bon ca fonctionne pas...

en plus Je ne comprends pas pourquoi en mode clone, quand je lance une video, sur mon ecran principal j ai le film et sur la tv j 'ai un ecran noir... la video ne s affiche pas.

La je viens de tout reinstaller, je configure mon xorg avec fglrxconfig en mode clone et je mets la tv en primary screen et cette fois ca marche...par contre j'ai la video qui ne s affiche pas sur l ecran principal (j'ai un ecran noir)

Dernière modification par alta_ir (Le 12/08/2005, à 20:07)

Hors ligne