Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 17/10/2006, à 13:07

Hamtaro

Beryl et ati radeon 9550

Coucou tout le monde

Voila quelques semaines que j'essaie d'installer correctement béryl...mais sans succès, au démarrage de ma session, il prefere tujours utiliser metacity... Je suis sous Ubuntu Dapper.

J'ai pourtant bien suivi  ce tuto : Installer beryl/ubntu/dapper/xgl

Mais sans succès...je suis un êu déçu, c'est au moins le 5ème tuto que j'essaie (ceux du forum icompris) mais sans résultats. Je me suis dit que cela venait sans doute de ma carte graphique puisque que je trouve nulle part de personnes ayant ma carte et ayant beryl....
C'est pour ça que je lance un appel sur ce forum ! lol

Voici mon lspci :

hamtaro@Sadida:~$ lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:0b.0 Multimedia audio controller: Creative Labs SB Audigy LS
0000:00:0c.0 Multimedia controller: Philips Semiconductors SAA7134 Video Broadcast Decoder (rev 01)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AS [Radeon 9550]
0000:01:00.1 Display controller: ATI Technologies Inc RV350 ?? [Radeon 9550] (Secondary)
hamtaro@Sadida:~$ glxinfo | grep direct
direct rendering: Yes
hamtaro@Sadida:~$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9550 Generic
OpenGL version string: 2.0.5814 (8.25.18)

Mon etc/module

agpgart
amd-k7-agp.ko
fglrx
lp
psmouse

Je ne sais pas si ma carte est AGP ou PCI, y a t'il un moyen de le savoir en tapant une ligne de commande?

hamtaro@Sadida:~$ lsmod | grep agp
via_agp                10560  1
agpgart                37072  2 fglrx,via_agp

Mon fichier xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "latin9"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
	Option	    "Buttons" "7"
	Option	    "ButtonMapping" "1 2 3 6 7"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "L1715S"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "Generic Video Card"
	Driver      "vesa"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
	Option	    "DesktopSetup" "single"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	Option	    "TVFormat" "PAL-N"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "Generic Video Card"
	Monitor    "L1715S"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Tcho et merci a ceux qui m'apporteront leur aide, je veux Beryl, je le veux  ! lol

Dernière modification par Hamtaro (Le 17/10/2006, à 13:11)

Hors ligne

#2 Le 17/10/2006, à 16:31

Hamtaro

Re : Beryl et ati radeon 9550

je ne sais pas a quoi j'ai touché mais au redémarrage...Ca ne voulait plus démarrer !

J'ai enlevé un truc mis dans le tuto dans le /etc/gdm/gdm.conf-custom pour pouvoir démrrer ma session normalement

L'erreur affichée était : no matching device section for instance(PCI:0:1:0)found.

Au secours s'il vous plait, j'aimerais repartir sur des bases saines.

C'est a dire installer correctement ma carte graphique, installer xgl convenablement et ensuite beryl !!

Ma carte semble bien installé mais c'est xgl qui bug. Mais j'aimerais désinstaller tout ce que j'ai fait a propos de beryl et xgl mais je ne vois pas comment faire?

Un coup de papatte?

Tcho

Hors ligne

#3 Le 17/10/2006, à 16:50

Blurg

Re : Beryl et ati radeon 9550

Deja pour ta carte graphique je te conseille d'utiliser le driver "radeon", donc pas de XGL mais AIGLX. Driver "radeon" : http://forum.ubuntu-fr.org/viewtopic.php?id=3803

Ensuite essaye dattendre Edgy, AIGLX est integré, tu auras juste a mettre le driver "radeon" dans ton xorg.conf, puis as installé Beryl, chez moi tt marche avec une RADEON 9600 .


>>CODYPACK Feisty Fawn !<<  [Icônes, Thèmes, Wallpapers, Skydomes, Guide pour débutant, etc]

DeviantArt
MySpace

Hors ligne

#4 Le 17/10/2006, à 17:35

Hamtaro

Re : Beryl et ati radeon 9550

J'ai fait ce que di le tuto pour remplacer les drivers que j'avaient avant, j'ai viré les paquets fglrx et mon fichier xorg.conf ressemble a ca :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "aticonfig-Screen[0]" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

    # path to defoma fonts
    FontPath     "/usr/share/X11/fonts/misc"
    FontPath     "/usr/share/X11/fonts/cyrillic"
    FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath     "/usr/share/X11/fonts/Type1"
    FontPath     "/usr/share/X11/fonts/100dpi"
    FontPath     "/usr/share/X11/fonts/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load  "i2c"
    Load  "bitmap"
    Load  "ddc"
    Load  "dri"
    Load  "extmod"
    Load  "freetype"
    Load  "glx"
    Load  "int10"
    Load  "type1"
    Load  "vbe"
EndSection

Section "Extensions"
 Option "RENDER" "Enable" 
EndSection

Section "InputDevice"
    Identifier  "Generic Keyboard"
    Driver      "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules" "xorg"
    Option        "XkbModel" "pc105"
    Option        "XkbLayout" "fr"
    Option        "XkbVariant" "latin9"
EndSection

Section "InputDevice"
    Identifier  "Configured Mouse"
    Driver      "mouse"
    Option        "CorePointer"
    Option        "Device" "/dev/input/mice"
    Option        "Protocol" "ExplorerPS/2"
    Option        "ZAxisMapping" "4 5"
    Option        "Emulate3Buttons" "true"
    Option        "Buttons" "7"
    Option        "ButtonMapping" "1 2 3 6 7"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier  "stylus"
    Driver      "wacom"
    Option        "Device" "/dev/wacom"          # Change to 
    Option        "Type" "stylus"
    Option        "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier  "eraser"
    Driver      "wacom"
    Option        "Device" "/dev/wacom"          # Change to 
    Option        "Type" "eraser"
    Option        "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier  "cursor"
    Driver      "wacom"
    Option        "Device" "/dev/wacom"          # Change to 
    Option        "Type" "cursor"
    Option        "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier   "L1715S"
    Option        "DPMS"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "Generic Video Card"
    Driver      "vesa"
    BusID       "PCI:1:0:0"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]"
    Driver           "radeon"
Option          "AGPMode" "4"
Option         "AGPSize" "64" # default: 8
Option         "RingSize" "8"
Option         "BufferSize" "2"
Option         "EnablePageFlip" "true"
Option         "EnableDepthMoves" "true"
Option         "RenderAccel" "true"
EndSection

Section "Screen"
    Identifier "Default Screen"
    Device     "Generic Video Card"
    Monitor    "L1715S"
    DefaultDepth     24
    SubSection "Display"
        Depth     1
        Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     4
        Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     8
        Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device     "aticonfig-Device[0]"
    Monitor    "aticonfig-Monitor[0]"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

Mais j'ai un message me disant sue la gestion alim d'écran n'est plus faite ou un truc comme ca et l'écran s'éteind....
Pourtant, j'ai bien la session de lancée, j'entends les tamtam derrière ^^
^Ausecours ! lol

TCho

Hors ligne

#5 Le 17/10/2006, à 18:16

G-rom

Re : Beryl et ati radeon 9550

Blurg le pilote radeon ne prend pas encore en charge l'accel 3D pour les 9500 9700 et 9800.

@Hamtaro: bizarre selon ton premier post tout à l'air correct. Je pencherai plutot pour une source de probleme venant d'un processeur 64bit. En effet tout n est pas rose en 64bit va voir dans cette section du forum s'il y a des problemes comme le tien.

sinon au démarrage un ptit ctrl+alt+f1 ou f2 pour te retrouver en mode console et remet ati comme driver le temps de tout réinstaller propre avec fglrx.


Quand tu ne sais pas (cherche puis) demande, quand tu sais partage.

Hors ligne

#6 Le 17/10/2006, à 18:50

Hamtaro

Re : Beryl et ati radeon 9550

J'ai donc remis les paquets fglrx et mon ficier xorg.conf ressemble a ca maintenant :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "latin9"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
	Option	    "Buttons" "7"
	Option	    "ButtonMapping" "1 2 3 6 7"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "L1715S"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "Generic Video Card"
	Driver      "vesa"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver           "fglrx"
	Option          "AGPMode" "4"
	Option         "AGPSize" "64" # default: 8
	Option         "RingSize" "8"
	Option         "BufferSize" "2"
	Option         "EnablePageFlip" "true"
	Option         "EnableDepthMoves" "true"
	Option         "RenderAccel" "true"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "Generic Video Card"
	Monitor    "L1715S"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

J'ai gardé les réglages option du tuot pour le driver radeon...dois je remettre mes anciens ou les rajouter a la suite? Je comprend rien a ma carte graphique !

Bon maintenant que tout remarce, comment je fais pour installer propremet béryl, ou xorg avant?

Merci

TCho

Hors ligne

#7 Le 17/10/2006, à 18:59

Blurg

Re : Beryl et ati radeon 9550

G-rom a écrit :

Blurg le pilote radeon ne prend pas encore en charge l'accel 3D pour les 9500 9700 et 9800.

@Hamtaro: bizarre selon ton premier post tout à l'air correct. Je pencherai plutot pour une source de probleme venant d'un processeur 64bit. En effet tout n est pas rose en 64bit va voir dans cette section du forum s'il y a des problemes comme le tien.

sinon au démarrage un ptit ctrl+alt+f1 ou f2 pour te retrouver en mode console et remet ati comme driver le temps de tout réinstaller propre avec fglrx.

Ok je savais pas, bizar quand même que ca marche pour la 9600 et pas pour la 9550.


>>CODYPACK Feisty Fawn !<<  [Icônes, Thèmes, Wallpapers, Skydomes, Guide pour débutant, etc]

DeviantArt
MySpace

Hors ligne

#8 Le 17/10/2006, à 19:05

Hamtaro

Re : Beryl et ati radeon 9550

Et pour instaler beryl ? une soluce ? lol

Quitte a passer sous Edgy, je suis partant, ca me permettra de la tester ^^
Mais j'ai parcouru le forum et le passage de dapper a edgy est pas très clair... Existe t il aussi un noyau pour mon processeur? (actuellement k7)

Tcho

Hors ligne

#9 Le 17/10/2006, à 20:43

G-rom

Re : Beryl et ati radeon 9550

évite de vouloir aller trop vite si déjà tu sais pas config un xorg.conf wink

est ce que tu as direct rendering = yes avc glxinfo | grep direct ??

Sinon pas la peine d'aller plus loin.
Si oui installe XGL et beryl comme dans les tutos.


Quand tu ne sais pas (cherche puis) demande, quand tu sais partage.

Hors ligne

#10 Le 17/10/2006, à 21:17

Hamtaro

Re : Beryl et ati radeon 9550

j'ai bien le yes en question ^^

Mais malgré ça et l'application de divers tuto, beryl foire dans l'install, je suis tout le temps sous metacity...(clignotement de l'écran puis rien...)

Peux tu m'indiquer des tutos et voir avec moi? Merci

Tcho

Hors ligne

#11 Le 17/10/2006, à 21:21

G-rom

Re : Beryl et ati radeon 9550

nan dsl je n'utilise pas moi meme XGL et beryl donc je ne peux que te proposer les tutos du forums ou du site beryl ou de la doc ici meme.


Quand tu ne sais pas (cherche puis) demande, quand tu sais partage.

Hors ligne

#12 Le 17/10/2006, à 22:17

Hamtaro

Re : Beryl et ati radeon 9550

oki je patienterais donc jusqu'au 26 octobre pour edgy qui semble mieux gérer tout cela !

Tcho

Hors ligne

#13 Le 18/10/2006, à 06:13

G-rom

Re : Beryl et ati radeon 9550

euh avec edgy y a juste AIGLX d'intégré c est tout, mais comme tu ne peux pas utiliser le driver radeon ça ne changera rien pour toi. Si tu veux du plus simple en fait il faut que tu attendes plutot un nouveau radeon ou carrement un meilleur driver proprio ATI.


Quand tu ne sais pas (cherche puis) demande, quand tu sais partage.

Hors ligne