Ubuntu-fr

ghimli

[Résolu][Edgy-AMD64]Carte son qui n'est plus reconnue

Bonsoir à tous, je me retrouve comme un idiot car je n'ai brusquement plus de son sous Edgy, alors que ce matin encore je l'avais... J'ai juste essayé d'installer la 3D suivant les tutos du site, et j'ai enlevés 4 paquets qu'apt-get me conseillait d'enlever à chaque fois (apt-get autoremove je crois)
Comme dit dans la doc, je joints le résultat de la commande aplay :

~$ aplay ~/up.wav
ALSA lib confmisc.c:670:(snd_func_card_driver) cannot find card '0'
ALSA lib conf.c:3479:(_snd_config_evaluate) function snd_func_card_driver returned error: Aucun périphérique de ce type
ALSA lib confmisc.c:391:(snd_func_concat) error evaluating strings
ALSA lib conf.c:3479:(_snd_config_evaluate) function snd_func_concat returned error: Aucun périphérique de ce type
ALSA lib confmisc.c:1070:(snd_func_refer) error evaluating name
ALSA lib conf.c:3479:(_snd_config_evaluate) function snd_func_refer returned error: Aucun périphérique de ce type
ALSA lib conf.c:3947:(snd_config_expand) Evaluate error: Aucun périphérique de ce type
ALSA lib pcm.c:2146:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:547: Erreur d'ouverture audio: Aucun périphérique de ce type

un lsmod | grep snd :

~$ lsmod | grep snd
snd_pcm_oss            57344  0 
snd_mixer_oss          22784  1 snd_pcm_oss
snd_pcm               108168  1 snd_pcm_oss
snd_timer              31112  1 snd_pcm
snd                    79016  4 snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore              14112  1 snd
snd_page_alloc         13200  1 snd_pcm

Pour le type de carte son, je trouve ça dans le lspci :

00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)

Quand je clique sur le controlleur de volume dans le systray, j'ai une erreur qui me parle de greffons gstreamer, mais j'ai bien les paquets gstreamer-alsa et gstreamer-esd d'installés...
J'ai essayé de réinstaller alsa-base, mais sans succès... Que se passe-t-il ?

Dernière modification par ghimli (Le 07/11/2006, à 17:05)

---

Ghimli, Ubuntu addicted

Desintegr

Re : [Résolu][Edgy-AMD64]Carte son qui n'est plus reconnue

Je viens d'apprendre qu'ATI faisait des chips audio.

Bon, essaye de charger le module : snd-atiixp
« sudo modprobe snd-atiixp »
Puis fais quelques tests audio.

Si ça ne fonctionne pas,  donne ce que raconte « dmesg » et « cat /proc/asound/pcm »

Dernière modification par Desintegr (Le 02/11/2006, à 01:33)

---

Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr

ghimli

Re : [Résolu][Edgy-AMD64]Carte son qui n'est plus reconnue

Salut, tout d'abords merci de m'aider
voila le résultat :

sudo modprobe snd-atiixp
Password:
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.17-10-generic/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_atiixp (/lib/modules/2.6.17-10-generic/kernel/sound/pci/snd-atiixp.ko): Unknown symbol in module, or unknown parameter (see dmesg)

On me dit d'aller voir le dmesg, donc voilà :
edit : vu que le dmesg est un peu grand, j'ai fait un dmesg | grep snd car c'est ça je suppose qui vous interesse ? J'ai quand même laissé le dmesg ensuite.

$ dmesg | grep snd
[   35.507456] snd_ac97_codec: Unknown symbol ac97_bus_type
[   35.735659] snd_atiixp_modem: Unknown symbol snd_ac97_resume
[   35.765378] snd_atiixp_modem: Unknown symbol snd_ac97_mixer
[   35.794213] snd_atiixp_modem: Unknown symbol snd_ac97_bus
[   35.822385] snd_atiixp_modem: Unknown symbol snd_ac97_suspend
[   35.850512] snd_atiixp_modem: Unknown symbol snd_ac97_write
[   36.106671] snd_ac97_codec: Unknown symbol ac97_bus_type
[   36.134708] snd_atiixp: Unknown symbol snd_ac97_pcm_close
[   36.160909] snd_atiixp: Unknown symbol snd_ac97_resume
[   36.186842] snd_atiixp: Unknown symbol snd_ac97_pcm_open
[   36.212326] snd_atiixp: Unknown symbol snd_ac97_update_bits
[   36.237459] snd_atiixp: Unknown symbol snd_ac97_mixer
[   36.261891] snd_atiixp: Unknown symbol snd_ac97_bus
[   36.285925] snd_atiixp: Unknown symbol snd_ac97_suspend
[   36.310038] snd_atiixp: Unknown symbol snd_ac97_get_short_name
[   36.333506] snd_atiixp: Unknown symbol snd_ac97_pcm_assign
[   36.356459] snd_atiixp: Unknown symbol snd_ac97_tune_hardware
[ 1436.033657] snd_ac97_codec: Unknown symbol ac97_bus_type
[ 1436.034482] snd_atiixp: Unknown symbol snd_ac97_pcm_close
[ 1436.034534] snd_atiixp: Unknown symbol snd_ac97_resume
[ 1436.034820] snd_atiixp: Unknown symbol snd_ac97_pcm_open
[ 1436.034955] snd_atiixp: Unknown symbol snd_ac97_update_bits
[ 1436.035000] snd_atiixp: Unknown symbol snd_ac97_mixer
[ 1436.035057] snd_atiixp: Unknown symbol snd_ac97_bus
[ 1436.035183] snd_atiixp: Unknown symbol snd_ac97_suspend
[ 1436.035474] snd_atiixp: Unknown symbol snd_ac97_get_short_name
[ 1436.035548] snd_atiixp: Unknown symbol snd_ac97_pcm_assign
[ 1436.035759] snd_atiixp: Unknown symbol snd_ac97_tune_hardware

le dmesg :

~$ dmesg
[    0.000000] Bootdata ok (command line is root=UUID=cad9d379-5fca-406e-b068-c1e8e6f7afcd ro splash vga=792)
[    0.000000] Linux version 2.6.17-10-generic (root@crested) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 15:34:39 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000037ea0000 (usable)
[    0.000000]  BIOS-e820: 0000000037ea0000 - 0000000037eac000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000037eac000 - 0000000037f00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f7c20
[    0.000000] ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x0000000037ea4598
[    0.000000] ACPI: FADT (v001 HP     Piranha  0x06040000 ATI  0x000f4240) @ 0x0000000037eabe3b
[    0.000000] ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x0000000037eabeaf
[    0.000000] ACPI: MADT (v001 PTLTD    APIC   0x06040000  LTP 0x00000000) @ 0x0000000037eabf7e
[    0.000000] ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x0000000037eabfc4
[    0.000000] ACPI: DSDT (v001     HP     309B 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of nodes 1
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000037ea0000
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Using node hash shift of 63
[    0.000000] Bootmem setup node 0 0000000000000000-0000000037ea0000
[    0.000000] On node 0 totalpages: 224445
[    0.000000]   DMA zone: 2592 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 221853 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:4 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] Checking aperture...
[    0.000000] CPU 0: aperture @ 0 size 32 MB
[    0.000000] No AGP bridge found
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Built 1 zonelists
[    0.000000] Kernel command line: root=UUID=cad9d379-5fca-406e-b068-c1e8e6f7afcd ro splash vga=792
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[    0.000000] time.c: Detected 1794.846 MHz processor.
[   13.442239] Console: colour dummy device 80x25
[   13.443278] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   13.444909] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   13.457967] Memory: 888884k/916096k available (2129k kernel code, 26824k reserved, 1424k data, 188k init)
[   13.536120] Calibrating delay using timer specific routine.. 3593.33 BogoMIPS (lpj=7186678)
[   13.536189] Security Framework v1.0.0 initialized
[   13.536198] SELinux:  Disabled at boot.
[   13.536223] Mount-cache hash table entries: 256
[   13.536405] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   13.536410] CPU: L2 Cache: 512K (64 bytes/line)
[   13.536415] CPU 0/0(1) -> Node 0 -> Core 0
[   13.536434] SMP alternatives: switching to UP code
[   13.536666] Freeing SMP alternatives: 20k freed
[   13.536820] checking if image is initramfs... it is
[   14.210254] Freeing initrd memory: 7236k freed
[   14.217918] ACPI: Core revision 20060707
[   14.218194] ACPI: Looking for DSDT ... not found!
[   14.895856] Using local APIC timer interrupts.
[   14.951525] result 12464218
[   14.951528] Detected 12.464 MHz APIC timer.
[   14.954921] Brought up 1 CPUs
[   14.954957] testing NMI watchdog ... OK.
[   14.995008] migration_cost=0
[   14.995295] NET: Registered protocol family 16
[   14.995327] ACPI: bus type pci registered
[   14.999493] PCI: Using MMCONFIG at e0000000
[   14.999542] PCI: No mmconfig possible on device 0:18
[   15.002214] ACPI: Interpreter enabled
[   15.002220] ACPI: Using IOAPIC for interrupt routing
[   15.002731] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   15.002737] PCI: Probing PCI hardware (bus 00)
[   15.023334] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[   15.023697] Boot video device is 0000:01:05.0
[   15.024393] PCI: Transparent bridge - 0000:00:14.4
[   15.024488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   15.026551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[   15.027524] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[   15.027769] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[   15.028013] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[   15.028253] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[   15.028493] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[   15.028734] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[   15.028974] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[   15.029214] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[   15.029773] ACPI: Embedded Controller [EC0] (gpe 26) interrupt mode.
[   15.074862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[   15.075143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[   15.075645] Linux Plug and Play Support v0.97 (c) Adam Belay
[   15.075664] pnp: PnP ACPI init
[   15.098785] pnp: PnP ACPI: found 10 devices
[   15.098838] PCI: Using ACPI for IRQ routing
[   15.098843] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   15.098855] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[   15.098859] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[   15.099018] PCI-DMA: Disabling IOMMU.
[   15.099193] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[   15.099198] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[   15.099203] pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved
[   15.099207] pnp: 00:08: ioport range 0x4d6-0x4d6 has been reserved
[   15.099212] pnp: 00:08: ioport range 0x870-0x87f has been reserved
[   15.099400] PCI: Bridge: 0000:00:01.0
[   15.099405]   IO window: 9000-9fff
[   15.099409]   MEM window: b0100000-b01fffff
[   15.099414]   PREFETCH window: c0000000-cfffffff
[   15.099418] PCI: Bridge: 0000:00:05.0
[   15.099421]   IO window: disabled.
[   15.099424]   MEM window: disabled.
[   15.099427]   PREFETCH window: disabled.
[   15.099434] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[   15.099438]   IO window: 0000a400-0000a4ff
[   15.099445]   IO window: 0000a800-0000a8ff
[   15.099452]   PREFETCH window: 50000000-51ffffff
[   15.099460]   MEM window: 52000000-53ffffff
[   15.099467] PCI: Bridge: 0000:00:14.4
[   15.099472]   IO window: a000-afff
[   15.099479]   MEM window: b0200000-b02fffff
[   15.099486]   PREFETCH window: 50000000-51ffffff
[   15.099504] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   15.099531] GSI 16 sharing vector 0xB1 and IRQ 16
[   15.099536] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) -> IRQ 177
[   15.099611] NET: Registered protocol family 2
[   15.134776] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   15.135107] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[   15.137214] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   15.138279] TCP: Hash tables configured (established 131072 bind 65536)
[   15.138290] TCP reno registered
[   15.138735] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[   15.139119] audit: initializing netlink socket (disabled)
[   15.139134] audit(1162424942.704:1): initialized
[   15.139311] VFS: Disk quotas dquot_6.5.1
[   15.139337] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   15.139393] Initializing Cryptographic API
[   15.139399] io scheduler noop registered
[   15.139408] io scheduler anticipatory registered
[   15.139417] io scheduler deadline registered
[   15.139438] io scheduler cfq registered (default)
[   15.140014] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   15.140019] pcie_portdrv_probe->Dev[5a37:1002] has invalid IRQ. Check vendor BIOS
[   15.140041] assign_interrupt_mode Found MSI capability
[   15.140083] Allocate Port Service[0000:00:05.0:pcie00]
[   15.140117] Allocate Port Service[0000:00:05.0:pcie01]
[   15.162153] Real Time Clock Driver v1.12ac
[   15.162204] Linux agpgart interface v0.101 (c) Dave Jones
[   15.162209] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   15.162801] GSI 17 sharing vector 0xC9 and IRQ 17
[   15.162809] ACPI: PCI Interrupt 0000:00:14.6[b] -> GSI 17 (level, low) -> IRQ 201
[   15.162820] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[   15.162880] mice: PS/2 mouse device common for all mice
[   15.163413] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   15.163641] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   15.163648] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   15.163934] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[   15.181890] i8042.c: Detected active multiplexing controller, rev 1.1.
[   15.196211] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   15.198312] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   15.200443] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   15.202438] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   15.204468] serio: i8042 KBD port at 0x60,0x64 irq 1
[   15.204730] TCP bic registered
[   15.204741] NET: Registered protocol family 1
[   15.204750] NET: Registered protocol family 8
[   15.204754] NET: Registered protocol family 20
[   15.211330] ACPI: (supports S0 S3 S4 S5)
[   15.211377] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   15.211399] Freeing unused kernel memory: 188k freed
[   15.272391] input: AT Translated Set 2 keyboard as /class/input/input0
[   15.294015] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 4608k, total 262144k
[   15.294030] vesafb: mode is 1024x768x24, linelength=3072, pages=112
[   15.294035] vesafb: scrolling: redraw
[   15.294039] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   15.442156] Console: switching to colour frame buffer device 128x48
[   15.443031] fb0: VESA VGA frame buffer device
[   16.631441] Capability LSM initialized
[   16.699870] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   16.699879] ACPI: Processor [CPU0] (supports 8 throttling states)
[   16.710616] ACPI Exception (acpi_thermal-0417): AE_NOT_FOUND, Invalid active threshold [0] [20060707]
[   16.717295] ACPI: Thermal Zone [THRM] (0 C)
[   17.178261] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[   17.178283] GSI 18 sharing vector 0xD1 and IRQ 18
[   17.178287] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 209
[   17.178299] ATIIXP: chipset revision 0
[   17.178301] ATIIXP: not 100% native mode: will probe irqs later
[   17.178311]     ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[   17.178325]     ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[   17.178333] Probing IDE interface ide0...
[   17.465030] hda: ST9100825A, ATA DISK drive
[   18.184323] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   18.259149] Probing IDE interface ide1...
[   18.995652] hdc: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
[   19.331829] ide1 at 0x170-0x177,0x376 on irq 15
[   19.343676] hda: max request size: 128KiB
[   19.344248] hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[   19.347497] hda: cache flushes supported
[   19.348105]  hda: hda1 hda2 < hda5 hda6 hda7 > hda3 hda4
[   19.473056] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
[   19.474263] Uniform CD-ROM driver Revision: 3.20
[   19.994058] usbcore: registered new driver usbfs
[   19.994745] usbcore: registered new driver hub
[   19.996251] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[   19.996285] GSI 19 sharing vector 0xD9 and IRQ 19
[   19.996945] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 217
[   19.998158] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   20.060233] ieee1394: Initialized config rom entry `ip1394'
[   20.066214] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[   20.067295] ohci_hcd 0000:00:13.0: irq 217, io mem 0xb0000000
[   20.142509] usb usb1: configuration #1 chosen from 1 choice
[   20.158533] hub 1-0:1.0: USB hub found
[   20.174769] hub 1-0:1.0: 4 ports detected
[   20.294230] GSI 20 sharing vector 0xE1 and IRQ 20
[   20.311268] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 23 (level, low) -> IRQ 225
[   20.379887] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[225]  MMIO=[b0209000-b02097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   20.421214] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 217
[   20.443200] ehci_hcd 0000:00:13.2: EHCI Host Controller
[   20.465742] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[   20.488905] ehci_hcd 0000:00:13.2: irq 217, io mem 0xb0002000
[   20.512307] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   20.536623] usb usb2: configuration #1 chosen from 1 choice
[   20.561445] hub 2-0:1.0: USB hub found
[   20.586489] hub 2-0:1.0: 8 ports detected
[   20.713849] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 217
[   20.740540] ohci_hcd 0000:00:13.1: OHCI Host Controller
[   20.767833] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[   20.795737] ohci_hcd 0000:00:13.1: irq 217, io mem 0xb0001000
[   20.881701] usb usb3: configuration #1 chosen from 1 choice
[   20.910570] hub 3-0:1.0: USB hub found
[   20.939617] hub 3-0:1.0: 4 ports detected
[   20.968918] Losing some ticks... checking if CPU frequency changed.
[   21.305427] kjournald starting.  Commit interval 5 seconds
[   21.335136] EXT3-fs: mounted filesystem with ordered data mode.
[   21.389079] usb 3-2: new low speed USB device using ohci_hcd and address 2
[   21.585353] usb 3-2: configuration #1 chosen from 1 choice
[   21.697031] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[653f02009b77407d]
[   34.533546] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   34.627593] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   35.507456] snd_ac97_codec: Unknown symbol ac97_bus_type
[   35.735659] snd_atiixp_modem: Unknown symbol snd_ac97_resume
[   35.765378] snd_atiixp_modem: Unknown symbol snd_ac97_mixer
[   35.794213] snd_atiixp_modem: Unknown symbol snd_ac97_bus
[   35.822385] snd_atiixp_modem: Unknown symbol snd_ac97_suspend
[   35.850512] snd_atiixp_modem: Unknown symbol snd_ac97_write
[   35.892145] input: PC Speaker as /class/input/input1
[   35.938909] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) -> IRQ 177
[   35.966745] Yenta: CardBus bridge found at 0000:06:04.0 [103c:30a4]
[   35.994974] Yenta: Enabling burst memory read transactions
[   36.023235] Yenta: Using INTVAL to route CSC interrupts to PCI
[   36.051308] Yenta: Routing CardBus interrupts to ISA
[   36.078497] Yenta TI: socket 0000:06:04.0, mfunc 0x00a61b22, devctl 0x64
[   36.106671] snd_ac97_codec: Unknown symbol ac97_bus_type
[   36.134708] snd_atiixp: Unknown symbol snd_ac97_pcm_close
[   36.160909] snd_atiixp: Unknown symbol snd_ac97_resume
[   36.186842] snd_atiixp: Unknown symbol snd_ac97_pcm_open
[   36.212326] snd_atiixp: Unknown symbol snd_ac97_update_bits
[   36.237459] snd_atiixp: Unknown symbol snd_ac97_mixer
[   36.261891] snd_atiixp: Unknown symbol snd_ac97_bus
[   36.285925] snd_atiixp: Unknown symbol snd_ac97_suspend
[   36.310038] snd_atiixp: Unknown symbol snd_ac97_get_short_name
[   36.333506] snd_atiixp: Unknown symbol snd_ac97_pcm_assign
[   36.356459] snd_atiixp: Unknown symbol snd_ac97_tune_hardware
[   36.469927] 8139too Fast Ethernet driver 0.9.27
[   36.504330] Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
[   36.526807] Socket status: 30000006
[   36.550057] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[   36.573401] pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
[   36.597093] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
[   36.675536] ACPI: PCI Interrupt 0000:06:04.3[b] -> GSI 23 (level, low) -> IRQ 225
[   36.700061] GSI 21 sharing vector 0xE9 and IRQ 21
[   36.722930] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 233
[   36.749133] eth0: RealTek RTL8139 at 0xffffc20010082400, 00:16:d4:07:60:48, IRQ 233
[   36.772705] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   36.782605] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[   36.876845] usbcore: registered new driver hiddev
[   36.905883] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input2
[   36.930637] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.1-2
[   36.956387] usbcore: registered new driver usbhid
[   36.982032] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   37.012271] sdhci: Secure Digital Host Controller Interface driver, 0.12
[   37.038291] sdhci: Copyright(c) Pierre Ossman
[   37.064311] sdhci: SDHCI controller found at 0000:06:04.4 [104c:8034] (rev 0)
[   37.091035] ACPI: PCI Interrupt 0000:06:04.4[A] -> GSI 20 (level, low) -> IRQ 177
[   37.118612] mmc0: SDHCI at 0xb020a000 irq 177 DMA
[   37.146185] mmc1: SDHCI at 0xb0209c00 irq 177 DMA
[   37.173165] mmc2: SDHCI at 0xb0209800 irq 177 DMA
[   37.352670] ts: Compaq touchscreen protocol output
[   37.503556] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[   37.545122] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   37.625378] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[   37.972873] lp: driver loaded but no devices found
[   38.108897] SCSI subsystem initialized
[   38.160374] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[   38.189494] ieee1394: sbp2: Try serialize_io=0 for better performance
[   38.275184] Adding 522040k swap on /dev/disk/by-uuid/62fa5b70-d1f7-49c6-aed4-f16d100657c9.  Priority:-1 extents:1 across:522040k
[   38.639140] NET: Registered protocol family 17
[   38.640788] EXT3 FS on hda4, internal journal
[   38.811523] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[   38.811527] md: bitmap version 4.39
[   38.968579] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[   41.677888] NET: Registered protocol family 10
[   41.677997] lo: Disabled Privacy Extensions
[   41.678147] IPv6 over IPv4 tunneling driver
[   51.321746] NTFS driver 2.1.27 [Flags: R/O MODULE].
[   51.376141] NTFS volume version 3.1.
[   51.432166] NTFS volume version 3.1.
[   52.185449] eth0: no IPv6 routers present
[   55.031657] ndiswrapper version 1.22 loaded (preempt=no,smp=yes)
[   55.108133] ndiswrapper (load_pe_images:573): fixing KI_USER_SHARED_DATA address in the driver
[   55.109298] ndiswrapper: driver bcmwl5 (Broadcom,02/11/2005, 3.100.64.0) loaded
[   55.109592] GSI 22 sharing vector 0x32 and IRQ 22
[   55.109597] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 50
[   55.117155] ndiswrapper (NdisWriteErrorLogEntry:241): log: 2E4A99B0, count: 1, return_address: ffffffff8837613e
[   55.181042] ndiswrapper (NdisWriteErrorLogEntry:244): code: 267
[   55.213293] ndiswrapper (miniport_init:264): couldn't initialize device: C0000001
[   55.213302] ndiswrapper (pnp_start_device:428): Windows driver couldn't initialize the device (C0000001)
[   55.213324] ndiswrapper (miniport_halt:327): device ffff810036d70500 is not initialized - not halting
[   55.213337] ndiswrapper: device eth%d removed
[   55.213347] unregister_netdevice: device eth%d/ffff810036d70000 never was registered
[   55.213364] ACPI: PCI interrupt for device 0000:06:02.0 disabled
[   55.213372] ndiswrapper: probe of 0000:06:02.0 failed with error -22
[   59.052076] ACPI: AC Adapter [ACAD] (on-line)
[   59.123248] ACPI: Battery Slot [BAT1] (battery absent)
[   59.137357] ACPI: Power Button (FF) [PWRF]
[   59.137377] ACPI: Sleep Button (FF) [SLPF]
[   59.137391] ACPI: Lid Switch [LID]
[   59.137396] ACPI: Power Button (CM) [PWRB]
[   59.283601] ibm_acpi: ec object not found
[   59.314854] pcc_acpi: loading...
[   59.362987] wmi_add device=ffff810037d37000
[   59.362991] calling WQBA
[   59.407023] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   59.660086] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[   59.666202] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x4 (1450 mV)
[   59.666206] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x6 (1400 mV)
[   59.666210] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
[   59.666215] cpu_init done, current fid 0xa, vid 0x2
[   59.667469] powernow-k8: ph2 null fid transition 0xa
[   66.825613] Bluetooth: Core ver 2.8
[   66.825618] NET: Registered protocol family 31
[   66.825620] Bluetooth: HCI device and connection manager initialized
[   66.825638] Bluetooth: HCI socket layer initialized
[   66.838695] Bluetooth: L2CAP ver 2.8
[   66.838699] Bluetooth: L2CAP socket layer initialized
[   66.879663] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1
[   66.894570] Bluetooth: RFCOMM socket layer initialized
[   66.894590] Bluetooth: RFCOMM TTY layer initialized
[   66.894592] Bluetooth: RFCOMM ver 1.7
[   74.648860] eth0: no IPv6 routers present
[ 1436.033657] snd_ac97_codec: Unknown symbol ac97_bus_type
[ 1436.034482] snd_atiixp: Unknown symbol snd_ac97_pcm_close
[ 1436.034534] snd_atiixp: Unknown symbol snd_ac97_resume
[ 1436.034820] snd_atiixp: Unknown symbol snd_ac97_pcm_open
[ 1436.034955] snd_atiixp: Unknown symbol snd_ac97_update_bits
[ 1436.035000] snd_atiixp: Unknown symbol snd_ac97_mixer
[ 1436.035057] snd_atiixp: Unknown symbol snd_ac97_bus
[ 1436.035183] snd_atiixp: Unknown symbol snd_ac97_suspend
[ 1436.035474] snd_atiixp: Unknown symbol snd_ac97_get_short_name
[ 1436.035548] snd_atiixp: Unknown symbol snd_ac97_pcm_assign
[ 1436.035759] snd_atiixp: Unknown symbol snd_ac97_tune_hardware

La commande cat/proc/asound/pcm ne renvoie absolument rien, comme cat /proc/asound/modules et par contre :

/proc/asound$ cat cards
--- no soundcards ---

Comment ça je suis in the ***** ?
Je précise que ma carte son n'est pas grillée (j'ai testé sous win pour me rassurer => ouf)

Dernière modification par ghimli (Le 02/11/2006, à 01:49)

---

Ghimli, Ubuntu addicted

Desintegr

Re : [Résolu][Edgy-AMD64]Carte son qui n'est plus reconnue

Que renvoie :
« md5sum /lib/modules/2.6.17-10-generic/kernel/sound/pci/snd-atiixp.ko »
« md5sum /lib/modules/2.6.17-10-generic/kernel/sound/pci/ac97/snd-ac97-codec.ko »
« md5sum /lib/modules/2.6.17-10-generic/modules.symbols »

Quels sont les paquets enlevés ?

Le paquet du noyau est bien « linux-image-2.6.17-10-generic_2.6.17-10.33_amd64.deb » ?

---

Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr

ghimli

Re : [Résolu][Edgy-AMD64]Carte son qui n'est plus reconnue

Alors voilà :
$ md5sum /lib/modules/2.6.17-10-generic/kernel/sound/pci/snd-atiixp.ko
b88350e4e202692d4dbc876a45043b9c  /lib/modules/2.6.17-10-generic/kernel/sound/pci/snd-atiixp.ko
$ md5sum /lib/modules/2.6.17-10-generic/kernel/sound/pci/ac97/snd-ac97-codec.ko
877e061608d046439a9eccdd1e9e2b93  /lib/modules/2.6.17-10-generic/kernel/sound/pci/ac97/snd-ac97-codec.ko
$ md5sum /lib/modules/2.6.17-10-generic/modules.symbols
1913c9e0e71fc1b6f02b54696c996102  /lib/modules/2.6.17-10-generic/modules.symbols

Par contre, je ne me souviens pas les paquets que j'ai enlevés, sinon je les aurais réinstallés pour tester... J'ai bien vu que dans synaptic il y avait un historique, mais je les ai enlevés en ligne de commande et du coup ça n'apparaît pas dans synaptic.
J'ai bien le noyau dont tu parles (même si je ne sais pas où trouver le fichier, je vois qu'il est installé dans synaptic)

edit : j'ai trouvé dans dpkg.log : il s'agit de libtiff-tools, groff, preview-latex-style et xdg-utils

Dernière modification par ghimli (Le 02/11/2006, à 09:42)

---

Ghimli, Ubuntu addicted

david breizh

Re : [Résolu][Edgy-AMD64]Carte son qui n'est plus reconnue

j'ai exactement le même soucis mais moi c'est en faisant l'installation d'un stick pinnacle hybride pro mais c'est exactement pareil au niveau de la carte son et je n'arrive pas à trouver de réponse, donc je suis intéressé aussi!

---

ah ! du fin fond de la bretagne grâce au libre on se sent moins seul!
Vive le libre et toutes les distributions qui m'ont fait découvrir le monde de linux!

Desintegr

Re : [Résolu][Edgy-AMD64]Carte son qui n'est plus reconnue

Voici ce que j'ai :

b88350e4e202692d4dbc876a45043b9c  /lib/modules/2.6.17-10-generic/kernel/sound/pci/snd-atiixp.ko
877e061608d046439a9eccdd1e9e2b93  /lib/modules/2.6.17-10-generic/kernel/sound/pci/ac97/snd-ac97-codec.ko
52aba6f0f9ce848033b90bcff7eddad0 /lib/modules/2.6.17-10-generic/modules.symbols

Le fichier « modules.symbols » a été modifié sur ton système. C'est sûrement ce qui a provoqué l'erreur. Normalement, ce fichier ne devrait pas être modifié.

Essaye de réinstaller ton noyau : « apt-get install --reinstall linux-image-2.6.17-10-generic » puis reboote.

Dernière modification par Desintegr (Le 02/11/2006, à 10:41)

---

Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr

ghimli

Re : [Résolu][Edgy-AMD64]Carte son qui n'est plus reconnue

Très bien je vais essayer ça ce soir. Merci de ton aide ! Pour ma culture, car j'aime bien comprendre pour après aider les autres si je le peux, quel est ce fichier module-symbols ? Pourquoi as-tu pensé à celui là et à quoi sert-il ?

---

Ghimli, Ubuntu addicted

Desintegr

Re : [Résolu][Edgy-AMD64]Carte son qui n'est plus reconnue

Le fichier « module.symbols » indique à quel module appartient tels symboles. Les symboles sont en quelque sorte les fonctions utilisables par le noyau.

Ton fichier a été modifié, des symboles ont été supprimés de la liste : le noyau ne savait plus dans quels modules étaient ces symboles. C'est la raison pour laquelle tu as des « Unknown symbol ».

Ce que je ne comprends pas, c'est pourquoi il a été modifié.

Pour david breizh, c'est sûrement le même problème. L'installation de son stick a, je pense, modifié cette liste.

---

Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr

ghimli

Re : [Résolu][Edgy-AMD64]Carte son qui n'est plus reconnue

Ahhhhhhhh ok tout devient clair ! Et bien en plus c'est ce que je pensais aussi : quand je voyais les messages d'erreur j'ai vu que quelquechose manquait dans le module ("unknow symbole in module"), alors j'ai essayé d'éditer le fichier .ko, mais il est illisible, donc je ne savais pas quoi faire ! Maintenant je saurais. Merci de ces éclaircissements !

---

Ghimli, Ubuntu addicted

Desintegr

Re : [Résolu][Edgy-AMD64]Carte son qui n'est plus reconnue

Un fichier .ko, c'est du binaire, c'est impossible de modifier à la main.

Si tu veux voir la liste des symboles d'un module : « objdump -t module.ko ». (paquet « binutils »)

---

Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr

synergy5853

Re : [Résolu][Edgy-AMD64]Carte son qui n'est plus reconnue

Pour le probleme greffon....Gstreamer, le probleme vient du fait que tu n'a pas le bon pilote, enfin ce n'est pas très pro mais, tenet de changer de pilote dans "configuration" materiel, ensuite ca devrais toujours pas marcher et tu remet celui d'avant et la pour ma part ca a marche!!! :):)