Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 20/08/2011, à 16:57

lambertine

resolu scanner epson pw710 ne fonctionne pas sous 11.04

Bonjour,

le suis sous ubuntu 11.04 et j'ai une imprimante epson pw710. L'imprimante fonctionne bien mais le scanner n'est pas reconnu.
J'ai essayer la methode 2 de la doc
mais sans resultat

catherine@athena:~$ lsusb
Bus 002 Device 005: ID 04b8:0852 Seiko Epson Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
catherine@athena:~$ sane-find-scanner

found USB scanner (vendor=0x04b8, product=0x0852) at libusb:002:005

j'ai fait la modif sur le fichier

catherine@athena:~$ cat /etc/sane.d/epson.conf
# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
scsi EPSON
# for the GT-6500:
scsi "EPSON SC"
#
# Parallel port scanner:
#pio 0x278
#pio 0x378
#pio 0x3BC
#
# USB scanner:
# There are two different methods of configuring a USB scanner: libusb and the kernel module
# For any system with libusb support (which is pretty much any recent Linux distribution) the
# following line is sufficient. This however assumes that the connected scanner (or to be more
# accurate, it's device ID) is known to the backend. 
usb
# For libusb support for unknown scanners use the following command
# usb <product ID> <device ID>
# e.g.:
# usb 0x4b8 0x110
# And for the scanner module, use the following configuration:
#usb /dev/usbscanner0
#usb /dev/usb/scanner0
usb 0x04b8 0x0852

et meme sur /etc/sane.d/epson2.conf.

catherine@athena:~$ cat /etc/sane.d/epson2.conf
# epson2.conf
#
# here are some examples for how to configure the EPSON2 backend

# SCSI
scsi EPSON
# for the GT-6500:
#scsi "EPSON SC"

# Parallel port
#pio 0x278
#pio 0x378
#pio 0x3BC

# USB
usb

# For libusb support for unknown scanners use the following command
# usb <product ID> <device ID>
# e.g.:
# usb 0x4b8 0x110
usb 0x04b8 0x0852

# Network
# 
# net 192.168.1.123
net autodiscovery

le premier fichier  explique comment configuerer mais je comprends pas l'anglais informatique ni l'autre d'ailleurs

Dernière modification par lambertine (Le 20/08/2011, à 17:25)

Hors ligne

#2 Le 20/08/2011, à 17:09

adhara

Re : resolu scanner epson pw710 ne fonctionne pas sous 11.04

Bonjour Lambertine,

Peut être aller voir sur ce lien: http://doc.ubuntu-fr.org/scanner_epson



Acer Aspire 5535
Ubuntu 10.04 LTS


MSI CX 61 2PC-802FR Ubuntu 22.04.4 LTS Lenovo  22.04.4 LTS
https://cercll.wordpress.com/ 
Soutenez l'April http://april.org
Mettez votre événement sur l'Agenda du Libre : http://www.agendadulibre.org/

Hors ligne

#3 Le 20/08/2011, à 17:17

lambertine

Re : resolu scanner epson pw710 ne fonctionne pas sous 11.04

oui c'est de la que j'ai tirer la methode 2
je n'ai pas essaye la trois c'est vrai

Hors ligne

#4 Le 20/08/2011, à 17:25

lambertine

Re : resolu scanner epson pw710 ne fonctionne pas sous 11.04

en recherchant dans mes message http://forum.ubuntu-fr.org/viewtopic.php?id=389824
j'ai vu que j'avais eu le meme probleme sur la derniere version ubuntu .
je marque donc resolu pour l'instant et je ferai la manip apres

Hors ligne