Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 29/07/2006, à 15:02

darta

Acceleration 3d et changement d'utilisateur

Bonjour,

Je ne sais pas si ce probleme a deja trouvé sa réponse, mais je ne l'ai pas trouvé sur ce forum.
Je possède une carte ATI Radeon 9550 et l'acceleration 3d est installée et fonctionnelle avec le driver téléchargé sur le site d'ATI.

Mon problème est le suivant : Lorsque je change d'utilisateur (ouverture d'une nouvelle session x et nouveau serveur x) je n'ai l'acceleration 3d que sur le premier utilisateur (ctrl+alt+f7) et non sur le deuxieme (ctrl+alt+f8).

Voici mon fichier xorg.conf
Je suis sous dapper.

Merci pour votre aide


# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen         "Default Screen" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "latin9"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Écran générique"
	HorizSync    30.0 - 115.0
	VertRefresh  50.0 - 160.0
	Option	    "DPMS"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
	Driver      "fglrx"
	Option	    "UseFBDev" "true"
	Option	    "DesktopSetup" "single"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	Option	    "TVFormat" "PAL-N"
	BusID       "PCI:3:0:0"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
	Monitor    "Écran générique"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Hors ligne

#2 Le 29/07/2006, à 15:39

mr_pouit

Re : Acceleration 3d et changement d'utilisateur

Le deuxième utilisateur est bien dans le groupe "video" ?

Mais je ne suis pas sûr que les pilotes fglrx supportent l'accélération graphique sur 2 serveurs graphiques en parallèle. hmm

Hors ligne

#3 Le 29/07/2006, à 15:58

kezar

Re : Acceleration 3d et changement d'utilisateur

Dans les propriétés du deuxième utilisateur il ne faut pas oublier de lui permettre d'utiliser l'accélération 3D (cocher "Utiliser l'accélération vidéo" dans l'onglet Privilèges utilisateur du gestionnaire d'utilisateurs pour l'utilisateur concerné - ça fait beaucoup d' "utilisateur" :S ).

Hors ligne

#4 Le 29/07/2006, à 16:19

darta

Re : Acceleration 3d et changement d'utilisateur

L'utilisateur en question fait bien parti du groupe video et l'acceleration video est cochée pour le 2eme utilisateur... donc pas de resultat de ce coté

Hors ligne

#5 Le 29/07/2006, à 16:24

darta

Re : Acceleration 3d et changement d'utilisateur

Pour info, si je tape :
fglrxinfo

J'obtiens :

Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

Error: unable to open display :0

Hors ligne

#6 Le 29/07/2006, à 20:32

kezar

Re : Acceleration 3d et changement d'utilisateur

C'est sur le display 1 qu'il doit aller. Je sais pas trop où modifier le bordel de tête, mais à mon humble avis le soucis vient de là : il essaye de lancer l'affichage sur le display 0 (ctrl+alt+f7), ce qui lui est refusé par le X qui tourne déjà dessus. Donc il faut trouver le moyen de tout rediriger vers le display 1. Il y a peut-être quelque chose à exploiter dans les tutos de xgl et de compiz, il a souvent été question de redirection de display pour jouer à des jeux sans passer par xgl.

Hors ligne

#7 Le 30/07/2006, à 00:24

darta

Re : Acceleration 3d et changement d'utilisateur

Merci je cherche cependant tjs pas resolu

Hors ligne

#8 Le 31/07/2006, à 13:05

darta

Re : Acceleration 3d et changement d'utilisateur

Je n'ai toujours pas trouver réponse a mon probleme quelqu'un a til une idée ?

Hors ligne

#9 Le 21/08/2006, à 18:54

Zic0

Re : Acceleration 3d et changement d'utilisateur

Bonjour à tous,

Je poste mon message ici car aprés une petite recherche, mon problème à l'air d'être similaire à celui ci.

Je viens juste de passer à Ubuntu Draper. L'installation est vraiment facile. J'ai réussi à installer du 1ier coup ma carte Wifi et ma carte ATI radeon 9600 en suivant ce tuto http://doc.ubuntu-fr.org/materiel/ati.:lol:

Le problème c'est qu'il semble y avoir un effet de bord génant à l'installation de la carte graphique : Dés que je veux veux ouvrir une session suplémentaire (changer d'utilisateur), l'affichage plante:mad: et le system avec...

La session active disparait, puis sur un écran type console, il y a cela (je me suis tout palucher à la main) :

* Setting up per-VC fonts...
* /dev/tty2
* /dev/tty3
* /dev/tty4
* /dev/tty5
* /dev/tty6

* Starting GNOME Display Manager                               ...[OK]
* Starting HPLinux Printing and Imaging System              ...[OK]
* Starting Comon Unix Printing System : cupsd               ...[OK]
* Starting System message bus dbus                            ...[OK]
* Starting Hardware Abstraction Layer hald                    ...[OK]
dumpkeycodes : No Such Device

* Starting powernowd                                                ...[OK]
* CPU frequency scaling not supported                          ...[OK]
* Starting Bluetooth services hcid sdpd                         ...[OK]
* Starting RAID monitoring services                               ...[OK]
* Starting amac(h)ronistic crom : anacron                      ...[OK]
* Starting deferred execution scheduler                         ...[OK]
* Starting peridic command scheduler                            ...[OK]
* checking battery state                                             ...[OK]
* Running Local boot script (/etc/rc.local)                      ...[OK]

Et la on est bloqué ; rien à faire (Ctrl Alt F7 / F8)  !!!

Donc j'ai rebooté, puis j'ai recharger mon ancien xorg.conf (avant l'installation de l'accélération 3D)
J'ai rebooté, et je peut rechanger d'utilisateur.

Voici mes 2 xorg
2D only origine :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"latin9"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. RV350 AP [Radeon 9600]"
	Driver		"ati"
	BusID		"PCI:3:0:0"
EndSection

Section "Monitor"
	Identifier	"VE150m"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. RV350 AP [Radeon 9600]"
	Monitor		"VE150m"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

3D new :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "latin9"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "VE150m"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
	Driver      "ati"
	BusID       "PCI:3:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
	Monitor    "VE150m"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Voilà, si un guru du direct rending pouvait nous aider, merci d'avance smile

#10 Le 25/08/2006, à 17:57

Zic0

Re : Acceleration 3d et changement d'utilisateur

J'ai fait des autres manips :

Aprés être loguer, j'ouvre une console txt (ctr alt F2)
Je me logue avec un autre utilisateur, puis je lance X sous une autre session (startx -- :1)

Et là, c'est le drame:

* Setting up per-VC fonts...
* /dev/tty2
* /dev/tty3
* /dev/tty4
* /dev/tty5
* /dev/tty6

* Starting GNOME Display Manager                               ...[OK]
* Starting HPLinux Printing and Imaging System              ...[OK]
* Starting Comon Unix Printing System : cupsd               ...[OK]
* Starting System message bus dbus                            ...[OK]
* Starting Hardware Abstraction Layer hald                    ...[OK]
dumpkeycodes : No Such Device

* Starting powernowd                                                ...[OK]
* CPU frequency scaling not supported                          ...[OK]
* Starting Bluetooth services hcid sdpd                         ...[OK]
* Starting RAID monitoring services                               ...[OK]
* Starting amac(h)ronistic crom : anacron                      ...[OK]
* Starting deferred execution scheduler                         ...[OK]
* Starting peridic command scheduler                            ...[OK]
* checking battery state                                             ...[OK]
* Running Local boot script (/etc/rc.local)                      ...[OK]

J'ai aussi essayé la simple déconnexion ca plantge aussi. L'invite de commande pour se loguer ne s'affiche pas.


Est ce qu'il y a des fichier log à regarder pour résoudre cePB ?

Merci d'avance smile

#11 Le 26/08/2006, à 12:58

eskopek

Re : Acceleration 3d et changement d'utilisateur

Si j'ai bien compris, tu ne peux pas utiliser Xgl sur un autre utilisateur que celui de départ, soit, celui sous lequel tu as tapé tes commandes à l'installation d'Xgl?
Il faut nous indiquer quel procédure tu as utilisée pour installer Xgl.
Soit le choix de session (avec un menu qui permet de choisir Xgl).
Soit directement en lancant ta session.
Pour ma part, Xgl s'est mis à focntionner sous un autre user sans que je lui demande... puis il a disparu de ce user...

Hors ligne

#12 Le 28/08/2006, à 08:44

Zic0

Re : Acceleration 3d et changement d'utilisateur

eskopek a écrit :

Si j'ai bien compris, tu ne peux pas utiliser Xgl sur un autre utilisateur que celui de départ, ...

Certes je ne peut plus changer de d'utilisateur, ni même me déconnecter.

eskopek a écrit :

soit, celui sous lequel tu as tapé tes commandes à l'installation d'Xgl?
Il faut nous indiquer quel procédure tu as utilisée pour installer Xgl.

J'ai rien fait de special pour installer Xgl. J'ai installé Ubuntu Dapper Drake, puis j'ai installé le driver ATI fglrx http://doc.ubuntu-fr.org/materiel/ati.
Cela installe automatiquement Xgl ? Qui dit accéleration graphique dit Xgl ?

eskopek a écrit :

Soit le choix de session (avec un menu qui permet de choisir Xgl).

Je ne savais pas que l'on pouvait choisir. donc j'ai rien fait de special.

eskopek a écrit :

Pour ma part, Xgl s'est mis à focntionner sous un autre user sans que je lui demande... puis il a disparu de ce user...

On m'avait pourtant juré, que l'informatique n'avait rien de magique... smile

#13 Le 28/08/2006, à 09:58

lse34

Re : Acceleration 3d et changement d'utilisateur

Bonjour à tous,

C'est mon 1er post ici malgre le fait que je suis sous ubuntu depuis que la Dapper est sortie, avant j'etais sur mandrake 10.1.

Grace a ce forum j'ai pu resoudre tous mes pb jusqu'a present.
Et depuis que j'ai installé les drivers proprio ATI (9800 pro) j'ai egalement ce pb d'ecran noir des que je ferme la session ou change d'utilisateur. Alt f1 f2 fn ne font rien et le ctrl alt backspace fait rebooter la machine.
J'ai lu qq part une astuce au niveau de gdm que je n'ai pas encore essayé mais d'autre l'on fait sans succes et donc je prends les devant en postant ici.
Je vous remercie par avance de votre contribution pour que le chmilblic avance.

Hors ligne

#14 Le 29/08/2006, à 08:29

lse34

Re : Acceleration 3d et changement d'utilisateur

Je confirme que l'astuce au niveau de GDM fonctionne et a bien resolue tous ces pb de changement utilisateur et fin de session.
Pour rappel :
Un contournement qui fonctionne généralement pour les gels du système à la fermeture de session à cause des pilotes fglrx : édite le fichier /etc/gdm/gdm.conf-custom, ajoute AlwaysRestartServer=true sous la section [daemon], et redémarre gdm : sudo /etc/init.d/gdm restart

Hors ligne

#15 Le 30/08/2006, à 22:30

Zic0

Re : Acceleration 3d et changement d'utilisateur

lse34 a écrit :

Je confirme que l'astuce au niveau de GDM fonctionne et a bien resolue tous ces pb de changement utilisateur et fin de session.
Pour rappel :
Un contournement qui fonctionne généralement pour les gels du système à la fermeture de session à cause des pilotes fglrx : édite le fichier /etc/gdm/gdm.conf-custom, ajoute AlwaysRestartServer=true sous la section [daemon], et redémarre gdm : sudo /etc/init.d/gdm restart

Pas chez moi sad
Celà résout le pb de deconnection, mais c'est toujours impossible de changer de d'utilisateur.

Je vais peut être aussi creuser sur la configuration de GDM.

#16 Le 12/11/2006, à 15:23

gazanova

Re : Acceleration 3d et changement d'utilisateur

Bonjour,

J'ai le même souci avec une Edgy et  une ATI radeon 9600

Pas de 3D pour le deuxieme utilisateur qui se connecte alors que le premier a bien la 3D. avec en bonus des plantages de temps en temps à la connexion du deuxieme utilisateur (tout est bloqué + écran noir).

L'astuce du AlwaysRestartServer=true ne fonctionne pas dans mon cas non plus.

Par ailleurs, je n'ai pas de groupe utilisateur 'video'. Dois-je en créer un et y mettre mes utilisateurs ?

Merci pour les infos

gazanova