Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 09/11/2006, à 08:10

Dayoflayo

Plantage de linux apres ouverture de beryl manager sous XGL

Bonjour, j'ai installé les pilotes propriétaire de ati, beryl et xgl, mais une fois le serveur sgl demaré, quand je lance beryl-manager, l'ordi plante et je dois faire un reset.
Quelqu'un aurait une idée svp ?
Je suis debutant en ce qui concerne Ubuntu lol
Merci

Dernière modification par Dayoflayo (Le 12/11/2006, à 16:34)

Hors ligne

#2 Le 09/11/2006, à 09:07

Astidiel

Re : Plantage de linux apres ouverture de beryl manager sous XGL

Il faudrait un peu plus d'information sur ton probleme:

Quelle carte graphique a tu?
Que renvoie la commande fglrxinfo ?
Quel version de Ubuntu?
Quel tuto tu a suivi?

Celui qui reçoit une idée de moi reçoit un savoir sans diminuer le mien, tout comme celui qui allume sa bougie à la mienne reçoit la lumière sans me plonger dans la pénombre. Thomas Jefferson

Hors ligne

#3 Le 11/11/2006, à 02:34

Sleeper

Re : Plantage de linux apres ouverture de beryl manager sous XGL

Chez moi j'ai un bug avec Beryl quand je le lance au démarrage.

J'ai remarqué qu'il fallait que j'ouvre une fenêtre avant de lancer Beryl pour qu'il se lance... hmm

Donc j'ouvre ma session, j'ouvre un terminal puis je lance beryl-manager et c'est ok.

Intel Core i5 750 : 4Go DDR : HD 2To : ATI HD4850 1Go DDR3 : SyncMaster 226bw
Pourquoi choisir GNU/Linux ? : Les commandes de base
Openbox : sur Ubuntu ou Debian, le tout en un script.

Hors ligne

#4 Le 11/11/2006, à 12:39

freddybidouille

Re : Plantage de linux apres ouverture de beryl manager sous XGL

Moi aussi j'ai un probleme dans le genre :
- Quand je fais fglrxinfo, ça dure deux secondes puis je me retrouve sur la fenêtre de connexion
- lsmod | grep agp ne renvoie rien du tout.
- Beryl Manager fais la même chose que fglrxinfo
- Quand je tapes beryl il me marque qu'il ne trouve pas de drivers et qu'il utilise AIGLX

Mais pourtant beryl fonctionne (sans le logo dans la barre) j'ai les effets et tout... Mais souvent, ça saccade et j'aimerais pouvoir graçe à beryl-manager pouvoir basculer vers mon bureau gnome normal de temps à autre...
Tous ces problemes sont (à mon avis, hein!!) du à mon xorg.backup pas optimisé du tout que j'ai du remettre puisque avec le bon Xorg modifié avec le tuto "ati" puis le tuto "beryl" ça me faisais Parse error

Voir plus bas ...

Hors ligne

#5 Le 11/11/2006, à 12:40

freddybidouille

Re : Plantage de linux apres ouverture de beryl manager sous XGL

xorg.backup (=xorg.conf actuel)

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
	FontPath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. RV350 AP [Radeon 9600]"
	Driver		"ati"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	HorizSync	30-70
	VertRefresh	50-150
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. RV350 AP [Radeon 9600]"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
	Mode	0666
EndSection

Mon Xorg optimisé (celui qui plante) : 

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load	"dbe"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection




Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Generic Monitor"
	HorizSync    30.0 - 70.0
	VertRefresh  50.0 - 150.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
	Driver      "ati"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

 Section "Device"
#       Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
        Option "AccelDFS"    "0" # mettez à 0 si vous avez une carte AGP
        Option 	"AGPMode" "4" # Décommentez si vous avez une carte AGP
        Option "AGPSize" "256" # Décommentez si vous avec une carte AGP AGP aperture size
        Option "GARTSize" "64"
        Option "RingSize" "8"
        Option "BufferSize" "2"
#       Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
        Option "ColorTiling" "1"
        Option "EnableDepthMoves" "yes"
        Option "UseFBDev" "false"
#        Option "RenderAccel" "true" # Enable the hardware render acceleration
        Option "mtrr" "on"
        Option	"SubPixelOrder" "none"
EndSection  C'EST A CETTE LIGNE LA QUE L'ON ME DIT PRASE ERROR

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
	Monitor    "Generic Monitor"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
	Option "Composite" "disable"
EndSection

mon /etc/modules

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp
rtc
fglrx
amd64-agp
nvidia-agp

Hors ligne

#6 Le 11/11/2006, à 21:11

freddybidouille

Re : Plantage de linux apres ouverture de beryl manager sous XGL

Up!!!

Hors ligne

#7 Le 12/11/2006, à 16:38

Dayoflayo

Re : Plantage de linux apres ouverture de beryl manager sous XGL

Alors enfaite la je lance xgl puis dès que je veux ouvrir un terminal ca freeze :s
Pour repondre à Astidiel

Quelle carte graphique a tu? => Ati xpress 200m
Que renvoie la commande fglrxinfo ?

display: :0.: screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON XPRESS Series Generic
OpenGL version string: 2.0.611 (8.28.8)

Quel version de Ubuntu? => la 6.10
Quel tuto tu a suivi? => http://lhansen.blogspot.com/2006/10/3d- … -edgy.html

Merci

Hors ligne

Pages : 1