Ubuntu-fr

zara

dual-screen

Bonjour à tous.

J'ai fait le tour des forums sans trouver de solution à mon problème alors je me resoud à poster.
Donc le problème c'est que je n'arrive pas à faire du dual screen.
J'ai une carte graphique ATI radeon 9600 xt, avec une sortie vga vers mon ecran plat 19" (écran 0) et une sortie DVI convertie en VGA sur laquelle je voudrais brancher mon écran plat 15" (ecran 1).
J'ai installé les drivers ATI sans problemes.

1.  Au départ j'ai ce fichier xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "aticonfig-Screen[0]" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

    # path to defoma fonts
    FontPath     "/usr/share/X11/fonts/misc"
    FontPath     "/usr/share/X11/fonts/cyrillic"
    FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath     "/usr/share/X11/fonts/Type1"
    FontPath     "/usr/share/X11/fonts/100dpi"
    FontPath     "/usr/share/X11/fonts/75dpi"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load  "i2c"
    Load  "bitmap"
    Load  "ddc"
    Load  "dri"
    Load  "extmod"
    Load  "freetype"
    Load  "glx"
    Load  "int10"
    Load  "type1"
    Load  "vbe"
EndSection

Section "InputDevice"
    Identifier  "Generic Keyboard"
    Driver      "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules" "xorg"
    Option        "XkbModel" "pc105"
    Option        "XkbLayout" "fr"
    Option        "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier  "Configured Mouse"
    Driver      "mouse"
    Option        "CorePointer"
    Option        "Device" "/dev/input/mice"
    Option        "Protocol" "ExplorerPS/2"
    Option        "ZAxisMapping" "4 5"
    Option        "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier  "stylus"
    Driver      "wacom"
    Option        "Device" "/dev/wacom"          # Change to
    Option        "Type" "stylus"
    Option        "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier  "eraser"
    Driver      "wacom"
    Option        "Device" "/dev/wacom"          # Change to
    Option        "Type" "eraser"
    Option        "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier  "cursor"
    Driver      "wacom"
    Option        "Device" "/dev/wacom"          # Change to
    Option        "Type" "cursor"
    Option        "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier   "19''"
    Option        "DPMS"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "Generic Video Card"
    Driver      "vesa"
    BusID       "PCI:1:0:0"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]"
    Driver      "fglrx"
EndSection

Section "Screen"
    Identifier "Default Screen"
    Device     "Generic Video Card"
    Monitor    "19''"
    DefaultDepth     24
    SubSection "Display"
        Depth     1
        Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     4
        Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     8
        Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device     "aticonfig-Device[0]"
    Monitor    "aticonfig-Monitor[0]"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

Section "Extensions"
    Option "Composite" "disable"
EndSection

Quan seul l'ecran 0 est branché, ubuntu se lance sans probleme. Si en revanche je branche les deux ecrans : ecran 0 sur sortie vga et ecran 1 sur la sortie dvi convertie en vga, ubuntu ne se lance pas, mes deux ecrans sont tout noirs, et sur l'ecran 0 j'ai un message : "pas de signal d'entrée".

2. Dans le terminal, j'ai tapé :
sudo aticonfig --initial=dual-head

et j'obtiens le xorg.conf suivant :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "aticonfig-Screen[0]" 0 0
    Screen         "aticonfig-Screen[1]" RightOf "aticonfig-Screen[0]"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

    # path to defoma fonts
    FontPath     "/usr/share/X11/fonts/misc"
    FontPath     "/usr/share/X11/fonts/cyrillic"
    FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath     "/usr/share/X11/fonts/Type1"
    FontPath     "/usr/share/X11/fonts/100dpi"
    FontPath     "/usr/share/X11/fonts/75dpi"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load  "i2c"
    Load  "bitmap"
    Load  "ddc"
    Load  "dri"
    Load  "extmod"
    Load  "freetype"
    Load  "glx"
    Load  "int10"
    Load  "type1"
    Load  "vbe"
EndSection

Section "InputDevice"
    Identifier  "Generic Keyboard"
    Driver      "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules" "xorg"
    Option        "XkbModel" "pc105"
    Option        "XkbLayout" "fr"
    Option        "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier  "Configured Mouse"
    Driver      "mouse"
    Option        "CorePointer"
    Option        "Device" "/dev/input/mice"
    Option        "Protocol" "ExplorerPS/2"
    Option        "ZAxisMapping" "4 5"
    Option        "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier  "stylus"
    Driver      "wacom"
    Option        "Device" "/dev/wacom"          # Change to
    Option        "Type" "stylus"
    Option        "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier  "eraser"
    Driver      "wacom"
    Option        "Device" "/dev/wacom"          # Change to
    Option        "Type" "eraser"
    Option        "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier  "cursor"
    Driver      "wacom"
    Option        "Device" "/dev/wacom"          # Change to
    Option        "Type" "cursor"
    Option        "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier   "19''"
    Option        "DPMS"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[1]"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "Generic Video Card"
    Driver      "vesa"
    BusID       "PCI:1:0:0"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]"
    Driver      "fglrx"
    BusID       "PCI:1:0:0"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[1]"
    Driver      "fglrx"
    BusID       "PCI:1:0:0"
    Screen      1
EndSection

Section "Screen"
    Identifier "Default Screen"
    Device     "Generic Video Card"
    Monitor    "19''"
    DefaultDepth     24
    SubSection "Display"
        Depth     1
        Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     4
        Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     8
        Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device     "aticonfig-Device[0]"
    Monitor    "aticonfig-Monitor[0]"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[1]"
    Device     "aticonfig-Device[1]"
    Monitor    "aticonfig-Monitor[1]"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

Section "Extensions"
    Option        "Composite" "disable"
EndSection

Pareil qu'en 1. si seul l'ecran 0 est branché ubuntu se lance sans probleme, si les deux sont branchés --> écrans tout noirs, "pas de signal d'entrée".

3. J'ai essayé ce tuto : http://doc.ubuntu-fr.org/materiel/multi-ecran, sans plus de résultats.

Quelqu'u a-t-il une idée ? Ai-je fait une mauvaise manip ?

Merci de m'aider

ledocdoc

Re : dual-screen

tu as quelle version des drivers ati?

Dernière modification par ledocdoc (Le 13/11/2006, à 11:59)

zara

Re : dual-screen

J'ai installé les pilotes propriétaires des dépots selon cette méthode :
http://doc.ubuntu-fr.org/materiel/ati

ledocdoc

Re : dual-screen

je te conseil de réinstaller les pilotes en suivant ce lien:

http://doc.ubuntu-fr.org/materiel/ati_proprietaire

remplace juste cette ligne:

./ati-driver-installer-8.30.3.run --buildpkg Ubuntu/dapper

par

./ati-driver-installer-8.30.3.run --buildpkg Ubuntu/6.10

et apres tu fais:

sudo fireglcontrolpanel

et tu choisis big desktop, tu reboot X et... ca devrait (peut etre) marcher:d

zara

Re : dual-screen

Bon comme d'hab, si ya que l'ecran principal de branché, ubuntu se lance nickel, si les deux sont branchés, j'obtiens deux ecrans noirs... pfff

ledocdoc

Re : dual-screen

voila mon xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen         "Default Screen" 0 0
        InputDevice    "Generic Keyboard"
        InputDevice    "Configured Mouse"
        InputDevice    "Synaptics Touchpad"
        InputDevice    "MX 1000"
EndSection

Section "Files"

        # path to defoma fonts
        FontPath     "/usr/share/X11/fonts/misc"
        FontPath     "/usr/share/X11/fonts/cyrillic"
        FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath     "/usr/share/X11/fonts/Type1"
        FontPath     "/usr/share/X11/fonts/100dpi"
        FontPath     "/usr/share/X11/fonts/75dpi"
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load  "bitmap"
        Load  "dbe"
        Load  "ddc"
        Load  "dri"
        Load  "extmod"
        Load  "freetype"
        Load  "glx"
        Load  "int10"
        Load  "type1"
        Load  "vbe"
EndSection

Section "InputDevice"
        Identifier  "Generic Keyboard"
        Driver      "kbd"
        Option      "CoreKeyboard"
        Option      "XkbRules" "xorg"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "fr"
        Option      "XkbVariant" "latin9"
EndSection

Section "InputDevice"
        Identifier  "Configured Mouse"
        Driver      "mouse"
        Option      "CorePointer"
        Option      "Device" "/dev/input/mice"
        Option      "Protocol" "ImPS/2"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "true"
        Option      "EmulateWheel" "true"
        Option      "EmulateWheelButton" "2"
EndSection

Section "InputDevice"
        Identifier  "MX 1000"
        Driver      "mouse"
        Option      "CorePointer"
        Option      "Protocol" "evdev"
        Option      "Dev Name" "Logitech USB RECEIVER"
        Option      "Dev Phys" "usb-*/input0"
        Option      "Device" "/dev/input/event3"
        Option      "Buttons" "12"
        Option      "ZAxisMapping" "4 5 7 6"
EndSection

Section "InputDevice"
        Identifier  "Synaptics Touchpad"
        Driver      "synaptics"
        Option      "SendCoreEvents" "true"
        Option      "Device" "/dev/psaux"
        Option      "Protocol" "auto-dev"
        Option      "HorizScrollDelta" "0"
EndSection

Section "Monitor"
        Identifier   "ecran generique"
        Option      "DPMS"
EndSection

Section "Monitor"
        Identifier   "aticonfig Monitor 1"
EndSection

Section "Device"
        Identifier  "ATI Technologies, Inc. M24 1T [FireGL M24 GL]"
        Driver      "fglrx"
        Option      "(null)"
        Option      "DesktopSetup" "horizontal"
        Option      "OverlayOnCRTC2" "1"
        Option      "UseInternalAGPGART" "no"
        Option      "KernelModuleParm" "agplock=0"
        Option      "VideoOverlay" "on"
        Option      "OpenGLOverlay" "off"
        Option      "UseFastTLS" "2"
        Option      "RenderAccel" "true" # Enable the hardware render acceleration
        BusID       "PCI:1:0:0"
EndSection

Section "Device"
        Identifier  "ATI Graphics Adapter 1"
        Driver      "fglrx"
        BusID       "PCI:1:0:0"
        Screen      1
EndSection

Section "Screen"
        Identifier "Default Screen"
        Device     "ATI Technologies, Inc. M24 1T [FireGL M24 GL]"
        Monitor    "ecran generique"
        DefaultDepth     24
        SubSection "Display"
                Depth     24
                Modes    "1600x1200" "1280x1024"
        EndSubSection
        SubSection "Display"
                Depth     4
                Modes    "1600x1200"
        EndSubSection
        SubSection "Display"
                Depth     8
                Modes    "1600x1200"
        EndSubSection
        SubSection "Display"
                Depth     15
                Modes    "1600x1200"
        EndSubSection
        SubSection "Display"
                Depth     16
                Modes    "1600x1200"
        EndSubSection
        SubSection "Display"
                Depth     24
                Modes    "1600x1200"
        EndSubSection
EndSection

Section "Screen"
        Identifier "aticonfig Screen 1"
        Device     "ATI Graphics Adapter 1"
        Monitor    "aticonfig Monitor 1"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "DRI"
        Mode         0666
EndSection

Section "Extensions"
        Option      "Composite" "disable"
EndSection