#1 Le 31/08/2011, à 12:15
- louize
Perte de données après une mauvaise installation d'ubuntu 11.04
Bonjour,
en voulant installer unbuntu 11.04 j'ai fait une énorme boulette, c'est à dire que j'ai installé ubuntu sur un disque dynamique. Sachant que je voulais installer en dual boot avec win7
Les problèmes suivant s'offrent à moi:
-au démarrage inscription suivante : Missing operating system puis rien ne se passe
-pas de proposition de démarre sous ubuntu
-ma seule possibilité de démarage est live usb
-quand je démarre avec live usb impossibilité de retrouvé mes données qui étaient sur une autre partition de mon disque dur
-en fait impossibilité de retrouver la partition avec mes données
la question est : Ai je perdu mes données? Quelles solutions s'offrent à moi pour résoudre ces problèmes?Suis-je dans la bonne rubrique?
PS: j'ai déjà posté mon problème dans la rubrique "installation d'ubuntu" http://forum.ubuntu-fr.org/viewtopic.ph … 1#p5980371 , on m'a conseillé de poster ici
PS1: je met mon lien de discussion dans le post spécial récupération de données.
Hors ligne
#2 Le 31/08/2011, à 12:33
- louize
Re : Perte de données après une mauvaise installation d'ubuntu 11.04
Voici le résultat du bootinfoscript, désolé pour le pâté
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Windows is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda2
and looks at sector 34042400 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos3)/boot/grub on this drive.
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda3: __________________________________________________________________________
File system: vfat
Boot sector type: Unknown
Boot sector info: According to the info in the boot sector, sda3 starts
at sector 81922048. But according to the info from
fdisk, sda3 starts at sector 206848. According to the
info in the boot sector, sda3 has 40957952 sectors..
But according to the info from the partition table, it
has 81715199 sectors.
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: vfat
Boot sector type: Unknown
Boot sector info: According to the info in the boot sector, sda4 starts
at sector 122882048. But according to the info from
fdisk, sda4 starts at sector 81922048. According to
the info in the boot sector, sda4 has 2048000
sectors.. But according to the info from the partition
table, it has 406473071 sectors.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 6178606 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the I:\syslinux
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 2,047 1,985 42 SFS
/dev/sda2 * 2,048 206,847 204,800 82 Linux swap / Solaris
/dev/sda3 206,848 81,922,047 81,715,200 83 Linux
/dev/sda4 81,922,048 488,395,119 406,473,072 42 SFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 4105 MB, 4105175040 bytes
32 heads, 63 sectors/track, 3977 cylinders, total 8017920 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 7,826,111 7,826,049 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 ab5f8446-6a25-48e8-9815-de2d116b8e2e swap
/dev/sda2 2552f584-99f1-4545-ba7a-3305de8a4277 ext4
/dev/sda3 16A0-2D6B vfat
/dev/sda4 D0FE-04BA vfat
/dev/sdb1 41AF-37DA vfat NOLIMIT
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root 2552f584-99f1-4545-ba7a-3305de8a4277
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root 2552f584-99f1-4545-ba7a-3305de8a4277
set locale_dir=($root)/boot/grub/locale
set lang=fr_FR
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root 2552f584-99f1-4545-ba7a-3305de8a4277
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=2552f584-99f1-4545-ba7a-3305de8a4277 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, avec Linux 2.6.38-8-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root 2552f584-99f1-4545-ba7a-3305de8a4277
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=2552f584-99f1-4545-ba7a-3305de8a4277 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root 2552f584-99f1-4545-ba7a-3305de8a4277
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root 2552f584-99f1-4545-ba7a-3305de8a4277
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda3 / ext4 errors=remount-ro 0 1
/dev/sda2 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
16.135051727 = 17.324879872 boot/grub/core.img 1
16.135063171 = 17.324892160 boot/grub/grub.cfg 1
1.571289062 = 1.687158784 boot/initrd.img-2.6.38-8-generic 2
16.133281708 = 17.322979328 boot/vmlinuz-2.6.38-8-generic 1
1.571289062 = 1.687158784 initrd.img 2
16.133281708 = 17.322979328 vmlinuz 1
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda3
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 20 ec 11 |.X.MSDOS5.0.. ..|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 e2 04 |........?.......|
00000020 00 f8 70 02 0a 27 00 00 00 00 00 00 02 00 00 00 |..p..'..........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 00 29 6b 2d a0 16 4e 4f 20 4e 41 4d 45 20 20 |..)k-..NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 4e 02 8a 56 40 b4 41 |{......|.N..V@.A|
00000070 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a f6 c1 01 |..U..r...U.u....|
00000080 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd 13 73 05 |t..F..-.V@....s.|
00000090 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 d1 80 e2 |.....f...@f.....|
000000a0 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 66 f7 e1 |?.......Af...f..|
000000b0 66 89 46 f8 83 7e 16 00 75 38 83 7e 2a 00 77 32 |f.F..~..u8.~*.w2|
000000c0 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 00 e8 2b |f.F.f..........+|
000000d0 00 e9 2c 03 a0 fa 7d b4 7d 8b f0 ac 84 c0 74 17 |..,...}.}.....t.|
000000e0 3c ff 74 09 b4 0e bb 07 00 cd 10 eb ee a0 fb 7d |<.t............}|
000000f0 eb e5 a0 f9 7d eb e0 98 cd 16 cd 19 66 60 80 7e |....}.......f`.~|
00000100 02 00 0f 84 20 00 66 6a 00 66 50 06 53 66 68 10 |.... .fj.fP.Sfh.|
00000110 00 01 00 b4 42 8a 56 40 8b f4 cd 13 66 58 66 58 |....B.V@....fXfX|
00000120 66 58 66 58 eb 33 66 3b 46 f8 72 03 f9 eb 2a 66 |fXfX.3f;F.r...*f|
00000130 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 8a ca 66 8b |3.f..N.f......f.|
00000140 d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 40 8a e8 c0 |.f....v....V@...|
00000150 e4 06 0a cc b8 01 02 cd 13 66 61 0f 82 75 ff 81 |.........fa..u..|
00000160 c3 00 02 66 40 49 75 94 c3 42 4f 4f 54 4d 47 52 |...f@Iu..BOOTMGR|
00000170 20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 | ............|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 52 65 |..............Re|
000001b0 6d 6f 76 65 20 64 69 73 6b 73 20 6f 72 20 6f 74 |move disks or ot|
000001c0 68 65 72 20 6d 65 64 69 61 2e ff 0d 0a 44 69 73 |her media....Dis|
000001d0 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 20 |k error...Press |
000001e0 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 61 |any key to resta|
000001f0 72 74 0d 0a 00 00 00 00 00 ac cb d8 00 00 55 aa |rt............U.|
00000200
Unknown BootLoader on sda4
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 6e 10 |.X.MSDOS5.0...n.|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 53 07 |........?.....S.|
00000020 00 40 1f 00 c9 07 00 00 00 00 00 00 02 00 00 00 |.@..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 00 29 ba 04 fe d0 4e 4f 20 4e 41 4d 45 20 20 |..)....NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 4e 02 8a 56 40 b4 41 |{......|.N..V@.A|
00000070 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a f6 c1 01 |..U..r...U.u....|
00000080 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd 13 73 05 |t..F..-.V@....s.|
00000090 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 d1 80 e2 |.....f...@f.....|
000000a0 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 66 f7 e1 |?.......Af...f..|
000000b0 66 89 46 f8 83 7e 16 00 75 38 83 7e 2a 00 77 32 |f.F..~..u8.~*.w2|
000000c0 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 00 e8 2b |f.F.f..........+|
000000d0 00 e9 2c 03 a0 fa 7d b4 7d 8b f0 ac 84 c0 74 17 |..,...}.}.....t.|
000000e0 3c ff 74 09 b4 0e bb 07 00 cd 10 eb ee a0 fb 7d |<.t............}|
000000f0 eb e5 a0 f9 7d eb e0 98 cd 16 cd 19 66 60 80 7e |....}.......f`.~|
00000100 02 00 0f 84 20 00 66 6a 00 66 50 06 53 66 68 10 |.... .fj.fP.Sfh.|
00000110 00 01 00 b4 42 8a 56 40 8b f4 cd 13 66 58 66 58 |....B.V@....fXfX|
00000120 66 58 66 58 eb 33 66 3b 46 f8 72 03 f9 eb 2a 66 |fXfX.3f;F.r...*f|
00000130 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 8a ca 66 8b |3.f..N.f......f.|
00000140 d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 40 8a e8 c0 |.f....v....V@...|
00000150 e4 06 0a cc b8 01 02 cd 13 66 61 0f 82 75 ff 81 |.........fa..u..|
00000160 c3 00 02 66 40 49 75 94 c3 42 4f 4f 54 4d 47 52 |...f@Iu..BOOTMGR|
00000170 20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 | ............|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 52 65 |..............Re|
000001b0 74 69 72 65 7a 20 6c 65 20 64 69 73 71 75 65 ff |tirez le disque.|
000001c0 0d 0a 45 72 72 2e 20 64 69 73 71 75 65 ff 0d 0a |..Err. disque...|
000001d0 50 72 65 73 73 65 7a 20 75 6e 65 20 74 6f 75 63 |Pressez une touc|
000001e0 68 65 20 70 6f 75 72 20 72 65 64 82 6d 61 72 72 |he pour red.marr|
000001f0 65 72 0d 0a 00 00 00 00 00 ac c0 ce 00 00 55 aa |er............U.|
00000200
=============================== StdErr Messages: ===============================
unlzma: Decoder error
edit: modération, ajout des balises "code" pour la lisibilité
Dernière modification par tshirtman (Le 31/08/2011, à 13:13)
Hors ligne
#3 Le 31/08/2011, à 13:12
- jilucorg
Re : Perte de données après une mauvaise installation d'ubuntu 11.04
Voici le résultat du bootinfoscript, désolé pour le pâté
Il te suffit de modifier ton message et de mettre ça entre les balises code (les <> bleus en haut de la fenêtre de composition).
jiluc.
––
Pour soutenir concrètement le logiciel libre : l'April ! http://www.april.org
Hors ligne
#4 Le 01/09/2011, à 13:19
- rmy
Re : Perte de données après une mauvaise installation d'ubuntu 11.04
Peux-tu donner un peux plus de détails sur "disque dynamique" : as-tu créé cela depuis windows7, si oui avais-u un partitionnement spécifique avant la conversion en dynamique ? Y avait-il des assemblages farfelus (LVM, raid ?)
Tes données se trouvaient-elles sur une partition NTFS, ext4 ? Je ne comprends pas bien dans quel ordre tu as procédé et à quel moment s'est produit ta perte de données…
En même temps, peux-tu, depuis ton live-usb, donner le retour de
sudo sfdisk -luS
et le résultat de testdisk (scan initial, quicksearch et deepersearch). Pas de WRITE avec testdisk pour l'instant.
Es-tu utilisateur gnu/linux averti qui a voulu tenter un truc avec Win7 ou un nouvel utilisateur qui a voulu rajouter du gnu à côté de son windows ? Es-tu déjà à l'aise avec les outils de récupération de donnée ?
récupération de données: vrac–topic unique–mon site pro pour les particuliers : www.diskcard.fr– Je recycle volontiers tous vos disques durs HS (ou pas).
Le site pro pour les pros, spécialiste recupération de données RAID, NAS et serveurs: www.vodata.fr
Hors ligne