Assistance sur un multiécran, avec une 8800 GTS et un écran cathodique

neoguardian · Le 24/09/2011, à 20:14

Bonjour,

Je viens en ces lieux demander de l'aide car je dois avouer que je coince un peu maintenant ^^'.
Voila quelques temps, j'ai acquis un écran à tube cathodique (un 17'' iiyama). Étant passé à Linux (Ubuntu 10.10) pour certaines raisons, j'ai donc essayé de faire comme sur le Windows qui doit trainer sur mon disque dur, avoir un multi-écran: mon plasma en 1440*900 et mon cathodique en 1024*768 mini.

Mon problème est simple (enfin, si on veut): mon écran cathodique est reconnu en 640*480 quoi qu'il arrive, j'ai donc tenté de faire les manipulations trouvés sur le wiki (plus quelques unes trouvés sur Internet), mais malheureusement, je n'ai toujours pas réussi: soit mon second écran n'est pas reconnu (pas d'image), soit il est forcement en 640x480.

J'ai même désinstallé et réinstallé les drivers NVidia afin de retrouver une installation 'claire et nette'.

En esperant que vous pourrez m'aider,
Cordialement
NeoGuardian

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 260.19.06  (buildd@palmer)  Mon Oct  4 16:01:38 UTC 2010

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 260.19.06  (buildmeister@builder101)  Mon Sep 13 07:06:38 PDT 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "CRT-0"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"

# Removed Option "TwinView" "true"
# Removed Option "MetaModes" "1280x1024, 1280x1024; 1024x768, 1024x768"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTS"
    Option         "SecondMonitorHorizSync" "65-85"
    Option         "SecondMonitorVertRefresh" "50-160"
    Option         "TwinViewOrientation" "RightOf"
EndSection

Section "Screen"

# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0, DFP: nvidia-auto-select +640+0"
# Removed Option "TwinView" "True"
# Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
# Removed Option "TwinView" "True"
# Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
# Removed Option "TwinViewXineramaInfoOrder" "DFP-0"
# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0, DFP: 1440x900 +640+0"
# Removed Option "metamodes" "CRT: 640x480_60 +0+0, DFP: 1440x900 +640+0"
# Removed Option "metamodes" "CRT: nvidia-auto-select @1280x768 +0+0, DFP: 1440x900 +1280+0"
# Removed Option "metamodes" "CRT: 1064x728 @1280x768 +0+0, DFP: 1440x900 +1280+0"
# Removed Option "metamodes" "CRT: 640x480 @1280x768 +0+0, DFP: 1440x900 +1280+0"
# Removed Option "metamodes" "CRT: 640x480 +0+0, DFP: 1440x900 +1280+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "NoLogo" "True"
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "CRT: 640x480 +0+0, DFP: 1440x900 +640+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Dernière modification par neoguardian (Le 24/09/2011, à 20:45)

wido · Le 24/09/2011, à 21:39

Bonjour,

tu ne peux pas paramétrer tes deux écrans via cette commande:

sudo nvidia-settings

SaTurNin · Le 24/09/2011, à 22:07

tu a une option metamode qui stipule 640x480 :

    Option         "metamodes" "CRT: 640x480 +0+0, DFP: 1440x900 +640+0"

essai de modifier en :

    Option         "metamodes" "CRT: 1024x768 +0+0, DFP: 1440x900 +1024+0"

mais l'utilisation de nvidia-seting serais plus judicieu surement, car si la résolution n'est pas reconnu sa risque de planté.

neoguardian · Le 25/09/2011, à 00:04

Justement, j'ai essayé de passer par le nvidia-setting, malheureusement, celui-ci ne connait que la résolution 640*480 (ou la 320*240).. pourtant, je sais que les autres résolutions sont possible (vu que sur l'autre OS, je les ai).

Par contre, j'ai un message qui m'annonce que xserver ne gère pas les nouvelles résolutions..

chibbata · Le 25/09/2011, à 00:21

salut
lis le chapitre 4 de ce lien http://doc.ubuntu-fr.org/configurer_son_ecran_old

neoguardian · Le 25/09/2011, à 19:12

Bonsoir, merci pour vos réponse

J'ai essayé ce tuto, mais il marche pas.. (au moins pour mon soucis)

Tout d'abord, voila le contenu lorsque je fais "cat /var/log/Xorg.0.log | more"

[  5306.413] 
X.Org X Server 1.9.0
Release Date: 2010-08-20
[  5306.413] X Protocol Version 11, Revision 0
[  5306.413] Build Operating System: Linux 2.6.24-28-server i686 Ubuntu
[  5306.413] Current Operating System: Linux neoguardian-fix 2.6.35-30-generic-pae #59-Ubuntu SMP Tue Aug 30 16:16:14 UTC 2011 i686
[  5306.413] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-30-generic-pae root=UUID=d90bbc76-b314-4266-90f5-8feeecfc2588 ro quiet splash
[  5306.413] Build Date: 09 January 2011  12:14:58PM
[  5306.413] xorg-server 2:1.9.0-0ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) 
[  5306.413] Current version of pixman: 0.18.4
[  5306.413]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  5306.413] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  5306.414] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 25 18:59:21 2011
[  5306.414] (==) Using config file: "/etc/X11/xorg.conf"
[  5306.414] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  5306.415] (==) ServerLayout "Layout0"
[  5306.415] (**) |-->Screen "Screen0" (0)
[  5306.415] (**) |   |-->Monitor "Monitor0"
[  5306.415] (**) |   |-->Device "Device0"
[  5306.415] (**) |-->Input Device "Keyboard0"
[  5306.415] (**) |-->Input Device "Mouse0"
[  5306.415] (**) Option "Xinerama" "0"
[  5306.415] (==) Automatically adding devices
[  5306.415] (==) Automatically enabling devices
[  5306.416] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  5306.416]     Entry deleted from font path.
[  5306.416] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
[  5306.416] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[  5306.416] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  5306.416] (WW) Disabling Keyboard0
[  5306.416] (WW) Disabling Mouse0
[  5306.416] (II) Loader magic: 0x81f9b00
[  5306.416] (II) Module ABI versions:
[  5306.416]     X.Org ANSI C Emulation: 0.4
[  5306.416]     X.Org Video Driver: 8.0
[  5306.416]     X.Org XInput driver : 11.0
[  5306.416]     X.Org Server Extension : 4.0
[  5306.418] (--) PCI: (0:1:9:0) 14f1:8800:107d:6f2b rev 5, Mem @ 0xf9000000/16777216
[  5306.418] (--) PCI:*(0:2:0:0) 10de:0193:107d:20be rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[  5306.419] (II) Open ACPI successful (/var/run/acpid.socket)
[  5306.419] (II) "extmod" will be loaded by default.
[  5306.419] (II) "dbe" will be loaded by default.
[  5306.419] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  5306.419] (II) "record" will be loaded by default.
[  5306.419] (II) "dri" will be loaded by default.
[  5306.419] (II) "dri2" will be loaded by default.
[  5306.419] (II) LoadModule: "glx"
[  5306.420] (II) Loading /usr/lib/xorg/extra-modules/libglx.so
[  5306.439] (II) Module glx: vendor="NVIDIA Corporation"
[  5306.439]     compiled for 4.0.2, module version = 1.0.0
[  5306.439]     Module class: X.Org Server Extension
[  5306.439] (II) NVIDIA GLX Module  260.19.06  Mon Sep 13 07:01:31 PDT 2010
[  5306.439] (II) Loading extension GLX
[  5306.439] (II) LoadModule: "extmod"
[  5306.439] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  5306.440] (II) Module extmod: vendor="X.Org Foundation"
[  5306.440]     compiled for 1.9.0, module version = 1.0.0
[  5306.440]     Module class: X.Org Server Extension
[  5306.440]     ABI class: X.Org Server Extension, version 4.0
[  5306.440] (II) Loading extension MIT-SCREEN-SAVER
[  5306.440] (II) Loading extension XFree86-VidModeExtension
[  5306.440] (II) Loading extension XFree86-DGA
[  5306.440] (II) Loading extension DPMS
[  5306.440] (II) Loading extension XVideo
[  5306.440] (II) Loading extension XVideo-MotionCompensation
[  5306.440] (II) Loading extension X-Resource
[  5306.440] (II) LoadModule: "dbe"
[  5306.440] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  5306.440] (II) Module dbe: vendor="X.Org Foundation"
[  5306.440]     compiled for 1.9.0, module version = 1.0.0
[  5306.440]     Module class: X.Org Server Extension
[  5306.440]     ABI class: X.Org Server Extension, version 4.0
[  5306.440] (II) Loading extension DOUBLE-BUFFER
[  5306.440] (II) LoadModule: "record"
[  5306.440] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  5306.440] (II) Module record: vendor="X.Org Foundation"
[  5306.440]     compiled for 1.9.0, module version = 1.13.0
[  5306.440]     Module class: X.Org Server Extension
[  5306.440]     ABI class: X.Org Server Extension, version 4.0
[  5306.440] (II) Loading extension RECORD
[  5306.440] (II) LoadModule: "dri"
[  5306.440] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  5306.440] (II) Module dri: vendor="X.Org Foundation"
[  5306.440]     compiled for 1.9.0, module version = 1.0.0
[  5306.440]     ABI class: X.Org Server Extension, version 4.0
[  5306.440] (II) Loading extension XFree86-DRI
[  5306.440] (II) LoadModule: "dri2"
[  5306.440] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  5306.440] (II) Module dri2: vendor="X.Org Foundation"
[  5306.440]     compiled for 1.9.0, module version = 1.2.0
[  5306.440]     ABI class: X.Org Server Extension, version 4.0
[  5306.440] (II) Loading extension DRI2
[  5306.440] (II) LoadModule: "nvidia"
[  5306.440] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[  5306.441] (II) Module nvidia: vendor="NVIDIA Corporation"
[  5306.441]     compiled for 4.0.2, module version = 1.0.0
[  5306.441]     Module class: X.Org Video Driver
[  5306.441] (II) NVIDIA dlloader X Driver  260.19.06  Mon Sep 13 06:37:13 PDT 2010
[  5306.441] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  5306.441] (--) using VT number 8

[  5306.455] (II) Loading sub module "fb"
[  5306.455] (II) LoadModule: "fb"
[  5306.455] (II) Loading /usr/lib/xorg/modules/libfb.so
[  5306.455] (II) Module fb: vendor="X.Org Foundation"
[  5306.455]     compiled for 1.9.0, module version = 1.0.0
[  5306.455]     ABI class: X.Org ANSI C Emulation, version 0.4
[  5306.455] (II) Loading sub module "wfb"
[  5306.455] (II) LoadModule: "wfb"
[  5306.456] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  5306.456] (II) Module wfb: vendor="X.Org Foundation"
[  5306.456]     compiled for 1.9.0, module version = 1.0.0
[  5306.456]     ABI class: X.Org ANSI C Emulation, version 0.4
[  5306.456] (II) Loading sub module "ramdac"
[  5306.456] (II) LoadModule: "ramdac"
[  5306.456] (II) Module "ramdac" already built-in
[  5306.456] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[  5306.456] (==) NVIDIA(0): RGB weight 888
[  5306.456] (==) NVIDIA(0): Default visual is TrueColor
[  5306.456] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  5306.456] (**) NVIDIA(0): Option "NoLogo" "True"
[  5306.456] (**) NVIDIA(0): Option "TwinView" "1"
[  5306.456] (**) NVIDIA(0): Option "TwinViewOrientation" "RightOf"
[  5306.456] (**) NVIDIA(0): Option "SecondMonitorHorizSync" "65-85"
[  5306.456] (**) NVIDIA(0): Option "SecondMonitorVertRefresh" "50-160"
[  5306.456] (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +0+0, DFP: 1440x900 +1024+0"
[  5306.456] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-1"
[  5306.456] (**) NVIDIA(0): Enabling RENDER acceleration
[  5306.456] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[  5306.456] (II) NVIDIA(0):     enabled.
[  5306.924] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[  5306.994] (II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTS (G80) at PCI:2:0:0 (GPU-0)
[  5306.994] (--) NVIDIA(0): Memory: 327680 kBytes
[  5306.994] (--) NVIDIA(0): VideoBIOS: 60.80.18.00.68
[  5306.994] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  5306.994] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[  5306.994] (--) NVIDIA(0): Connected display device(s) on GeForce 8800 GTS at PCI:2:0:0
[  5306.994] (--) NVIDIA(0):     CRT-0
[  5306.994] (--) NVIDIA(0):     Samsung SyncMaster (DFP-1)
[  5306.994] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[  5306.994] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): 330.0 MHz maximum pixel clock
[  5306.994] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal Dual Link TMDS
[  5306.996] (**) NVIDIA(0): TwinView enabled
[  5306.996] (II) NVIDIA(0): Display Devices found referenced in MetaMode: CRT-0, DFP-1
[  5307.008] (II) NVIDIA(0): Assigned Display Devices: CRT-0, DFP-1
[  5307.009] (II) NVIDIA(0): Validated modes:
[  5307.009] (II) NVIDIA(0):     "CRT:nvidia-auto-select+0+0,DFP:1440x900+1024+0"
[  5307.009] (II) NVIDIA(0): Virtual screen size determined to be 2464 x 900
[  5307.042] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[  5307.042] (WW) NVIDIA(0):     from CRT-0's EDID.
[  5307.042] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[  5307.042] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[  5307.042] (--) Depth 24 pixmap format is 32 bpp
[  5307.042] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[  5307.043] (II) NVIDIA(0): Initialized GPU GART.
[  5307.048] (II) NVIDIA(0): Setting mode "CRT:nvidia-auto-select+0+0,DFP:1440x900+1024+0"
[  5307.074] (II) Loading extension NV-GLX
[  5307.116] (II) NVIDIA(0): Initialized OpenGL Acceleration
[  5307.116] (==) NVIDIA(0): Disabling shared memory pixmaps
[  5307.116] (II) NVIDIA(0): Initialized X Rendering Acceleration
[  5307.116] (==) NVIDIA(0): Backing store disabled
[  5307.116] (==) NVIDIA(0): Silken mouse enabled
[  5307.137] (**) NVIDIA(0): DPMS enabled
[  5307.137] (II) Loading extension NV-CONTROL
[  5307.137] (II) Loading extension XINERAMA
[  5307.137] (II) Loading sub module "dri2"
[  5307.137] (II) LoadModule: "dri2"
[  5307.137] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[  5307.137] (II) NVIDIA(0): [DRI2] Setup complete
[  5307.137] (==) RandR enabled
[  5307.137] (II) Initializing built-in extension Generic Event Extension
[  5307.137] (II) Initializing built-in extension SHAPE
[  5307.137] (II) Initializing built-in extension MIT-SHM
[  5307.137] (II) Initializing built-in extension XInputExtension
[  5307.137] (II) Initializing built-in extension XTEST
[  5307.137] (II) Initializing built-in extension BIG-REQUESTS
[  5307.137] (II) Initializing built-in extension SYNC
[  5307.137] (II) Initializing built-in extension XKEYBOARD
[  5307.137] (II) Initializing built-in extension XC-MISC
[  5307.137] (II) Initializing built-in extension SECURITY
[  5307.137] (II) Initializing built-in extension XINERAMA
[  5307.137] (II) Initializing built-in extension XFIXES
[  5307.137] (II) Initializing built-in extension RENDER
[  5307.137] (II) Initializing built-in extension RANDR
[  5307.137] (II) Initializing built-in extension COMPOSITE
[  5307.137] (II) Initializing built-in extension DAMAGE
[  5307.137] (II) Initializing built-in extension GESTURE
[  5307.137] (II) Initializing extension GLX
[  5307.164] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[  5307.170] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  5307.170] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  5307.170] (II) LoadModule: "evdev"
[  5307.170] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  5307.171] (II) Module evdev: vendor="X.Org Foundation"
[  5307.171]     compiled for 1.9.0, module version = 2.3.2
[  5307.171]     Module class: X.Org XInput Driver
[  5307.171]     ABI class: X.Org XInput driver, version 11.0
[  5307.171] (**) Power Button: always reports core events
[  5307.171] (**) Power Button: Device: "/dev/input/event1"
[  5307.184] (II) Power Button: Found keys
[  5307.184] (II) Power Button: Configuring as keyboard
[  5307.184] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  5307.184] (**) Option "xkb_rules" "evdev"
[  5307.184] (**) Option "xkb_model" "evdev"
[  5307.184] (**) Option "xkb_layout" "fr"
[  5307.184] (**) Option "xkb_variant" "oss"
[  5307.187] (II) XKB: reuse xkmfile /var/lib/xkb/server-03B9BA61C8A1BA78B8E8368594E484A532C88FC7.xkm
[  5307.188] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[  5307.189] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  5307.189] (**) Power Button: always reports core events
[  5307.189] (**) Power Button: Device: "/dev/input/event0"
[  5307.200] (II) Power Button: Found keys
[  5307.200] (II) Power Button: Configuring as keyboard
[  5307.200] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  5307.200] (**) Option "xkb_rules" "evdev"
[  5307.200] (**) Option "xkb_model" "evdev"
[  5307.200] (**) Option "xkb_layout" "fr"
[  5307.200] (**) Option "xkb_variant" "oss"
[  5307.202] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2)
[  5307.202] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  5307.202] (**) Logitech USB Keyboard: always reports core events
[  5307.202] (**) Logitech USB Keyboard: Device: "/dev/input/event2"
[  5307.216] (II) Logitech USB Keyboard: Found keys
[  5307.216] (II) Logitech USB Keyboard: Configuring as keyboard
[  5307.216] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD)
[  5307.216] (**) Option "xkb_rules" "evdev"
[  5307.216] (**) Option "xkb_model" "evdev"
[  5307.216] (**) Option "xkb_layout" "fr"
[  5307.216] (**) Option "xkb_variant" "oss"
[  5307.218] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event3)
[  5307.218] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  5307.218] (**) Logitech USB Keyboard: always reports core events
[  5307.218] (**) Logitech USB Keyboard: Device: "/dev/input/event3"
[  5307.232] (II) Logitech USB Keyboard: Found absolute axes
[  5307.232] (II) evdev-grail: failed to open grail, no gesture support
[  5307.232] (II) Logitech USB Keyboard: Found keys
[  5307.232] (II) Logitech USB Keyboard: Configuring as mouse
[  5307.232] (II) Logitech USB Keyboard: Configuring as keyboard
[  5307.232] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD)
[  5307.232] (**) Option "xkb_rules" "evdev"
[  5307.232] (**) Option "xkb_model" "evdev"
[  5307.232] (**) Option "xkb_layout" "fr"
[  5307.232] (**) Option "xkb_variant" "oss"
[  5307.233] (II) Logitech USB Keyboard: initialized for absolute axes.
[  5307.237] (II) config/udev: Adding input device Logitech USB Trackball (/dev/input/event4)
[  5307.237] (**) Logitech USB Trackball: Applying InputClass "evdev pointer catchall"
[  5307.237] (**) Logitech USB Trackball: always reports core events
[  5307.237] (**) Logitech USB Trackball: Device: "/dev/input/event4"
[  5307.248] (II) Logitech USB Trackball: Found 9 mouse buttons
[  5307.248] (II) Logitech USB Trackball: Found relative axes
[  5307.248] (II) Logitech USB Trackball: Found x and y relative axes
[  5307.248] (II) Logitech USB Trackball: Configuring as mouse
[  5307.248] (**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
[  5307.248] (**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  5307.248] (II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
[  5307.248] (II) Logitech USB Trackball: initialized for relative axes.
[  5307.249] (II) config/udev: Adding input device Logitech USB Trackball (/dev/input/mouse0)
[  5307.249] (II) No input driver/identifier specified (ignoring)
[  5307.255] (II) config/udev: Adding input device cx88 IR (WinFast DTV2000 H rev. (/dev/input/event5)
[  5307.255] (**) cx88 IR (WinFast DTV2000 H rev.: Applying InputClass "evdev keyboard catchall"
[  5307.255] (**) cx88 IR (WinFast DTV2000 H rev.: always reports core events
[  5307.256] (**) cx88 IR (WinFast DTV2000 H rev.: Device: "/dev/input/event5"
[  5307.264] (II) cx88 IR (WinFast DTV2000 H rev.: Found keys
[  5307.264] (II) cx88 IR (WinFast DTV2000 H rev.: Configuring as keyboard
[  5307.264] (II) XINPUT: Adding extended input device "cx88 IR (WinFast DTV2000 H rev." (type: KEYBOARD)
[  5307.264] (**) Option "xkb_rules" "evdev"
[  5307.264] (**) Option "xkb_model" "evdev"
[  5307.264] (**) Option "xkb_layout" "fr"
[  5307.264] (**) Option "xkb_variant" "oss"

Et voici mon fichier xorg.conf

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 260.19.06  (buildd@palmer)  Mon Oct  4 16:01:38 UTC 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    Option         "DPMS"
    VendorName     "Unknown"
    ModelName      "CRT-0"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Modeline "1024x768_60.00"  64.11  1024 1080 1184 1344  768 769 772 795  -HSync +Vsync
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTS"
    Option         "SecondMonitorHorizSync" "65-85"
    Option         "SecondMonitorVertRefresh" "50-160"
    Option         "TwinViewOrientation" "RightOf"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "NoLogo" "True"
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "CRT: nvidia-auto-select +0+0, DFP: 1440x900 +1024+0"
    SubSection "Display"
        Depth        24
        Modes        "1680x1050_75.00" "1280x1024" "1024x768"
    EndSubSection

EndSection

Je dois avouer que je sèche.. à moins qu'Ubuntu (ou mes drivers tout simplement) ne gère pas ce genre de configuration ? (écran plat + écran cathodique, en mode Twinview)

Dernière modification par neoguardian (Le 25/09/2011, à 19:12)

wido · Le 26/09/2011, à 08:52

Va dans sudo nvidia-settings sélectionne ton GPU et va dans le paramètre de ton écran cathodique tu auras en bas de la fenêtre Acquire EDID
enregistre le dans le dossier /etc/X11/ sous le nom edid.bin

ensuite

tu ajoutes la ligne dans la section Device

    Option      "CustomEDID" "CRT-0:/etc/X11/edid.bin"

en éditant le fichier xorg.conf.

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTS"
    Option         "SecondMonitorHorizSync" "65-85"
    Option         "SecondMonitorVertRefresh" "50-160"
    Option         "TwinViewOrientation" "RightOf"
    Option      "CustomEDID" "CRT-0:/etc/X11/edid.bin"
EndSection

redémarre et vois si ça le refait.

vu sur:

http://forums.fedoraforum.org/showthread.php?t=228786 et http://ubuntuforums.org/showthread.php?t=992869

si ça ne fonctionne pas à tester aussi: http://forums.opensuse.org/english/get- … ost1923697

neoguardian · Le 27/09/2011, à 21:41

Désolé, je n'ai pas pu faire les manipulations avant. Je vais tenter de suite, et je donne la réponse le plus rapidement possible.
EDIT: Je viens de regarder, je n'ai pas Acquire EDID dans la section concernée. J'ai regardé au bon endroit (au taff, on a aussi Ubuntu, et j'ai pu comparer) mais la, il n'y a pas le bouton.

Merci pour vos réponses en tout cas.

Dernière modification par neoguardian (Le 27/09/2011, à 21:45)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 24/09/2011, à 20:14

Assistance sur un multiécran, avec une 8800 GTS et un écran cathodique

#2 Le 24/09/2011, à 21:39

Re : Assistance sur un multiécran, avec une 8800 GTS et un écran cathodique

#3 Le 24/09/2011, à 22:07

Re : Assistance sur un multiécran, avec une 8800 GTS et un écran cathodique

#4 Le 25/09/2011, à 00:04

Re : Assistance sur un multiécran, avec une 8800 GTS et un écran cathodique

#5 Le 25/09/2011, à 00:21

Re : Assistance sur un multiécran, avec une 8800 GTS et un écran cathodique

#6 Le 25/09/2011, à 19:12

Re : Assistance sur un multiécran, avec une 8800 GTS et un écran cathodique

#7 Le 26/09/2011, à 08:52

Re : Assistance sur un multiécran, avec une 8800 GTS et un écran cathodique

#8 Le 27/09/2011, à 21:41

Re : Assistance sur un multiécran, avec une 8800 GTS et un écran cathodique

Pied de page des forums