Pages : 1
#1 Le 07/01/2007, à 14:23
- Patapouf POuf
Problème d'extinction / deconnection PC
Bonjour,
J'ai réinstallé Ubuntu 6.06.1 Dapper Drake après un bref passage sous Ubuntu 6.10 Edgy Eft.
J'en suis totalement satisfait, à part un problème assez embêtant ( même problème qui m'avait poussé à faire un upgrade vers Edgy ) : Lorsque j'arrête mon ordinateur via Système -> Quitter ou l'icône d'extinction située en haut à gauche de l'écran oub ien que je me déconnecte, la procédure commence, puis l'écran devient noir, que ce soit pour une extinction ou une deconnection. Malgré celà, le bouton Power de ma tour reste allumée.Je dois alors finir l'arrêt de mon oridnateur par un appui prolongé et manuel de ce même bouton pour que ma tour soit effectivement "Hors Ligne". Pour la deconnection, je ne peux donc plus me déconnecter ou faire un switch d'user sans passer par ce même appui prolongé du bouton "Power". Celà est comme vous vous le doutez très gênant. J'ai le même problème avec le kernel pour i386 ou bien le kernel optimisé k7 ( j'ai un AMD Sempron ) .
Nota: Ma tour est une Compaq Presario SR1802FR.
Ma "config":
( Prise lorsque j'étais encore sous Windows il y a quelques mois, et je n'y ai pas touché depuis [Config d'origine] . )
2006-08-26 13:52:29 CEST
------------------------------------------------------------------------------
*Information sur le modèle*
------------------------------------------------------------------------------
*Nom du modèle*SR1802FR
*Numéro du produit*ES071AA-ABF
*Numéro de série*CNH61503FF
*Version du logiciel*62FRheREA2
*Nomenclature du matériel*0nF041100
*Nomenclature des logiciels*FR62
*ID du service*071-806
------------------------------------------------------------------------------
*Système d'exploitation*
------------------------------------------------------------------------------
*Nom*Microsoft Windows XP Home Edition
*Paquet de service*Service Pack 2
*Numéro de production*2600
*Version DirectX*9.0c (4.09.00.0904)
------------------------------------------------------------------------------
*Informations du système*
------------------------------------------------------------------------------
*Fabricant du système*Compaq Presario 061
*Modèle*ES071AA-ABF SR1802FR FR620
*Numéro de série du système*CNH61503FF
*Nombre total d'UCs logiques*1
*Mémoire physique totale*446 MB
*Nombre total de lecteurs optiques*1
*Nombre total de disques durs*1
*Nombre total de cartes vidéo*1
*Nom du système*GUEG
------------------------------------------------------------------------------
*Ouverture de session*
------------------------------------------------------------------------------
*Nom*Compaq_Propriétaire
------------------------------------------------------------------------------
*Carte mère*
------------------------------------------------------------------------------*Carte de système**Puce*ATI RS480
*Pont sud*ATI SB400
*Fabricant*ASUSTek Computer INC.
*Nom du produit*Amberine M*BIOS**Fournisseur*ÿÿPhoenix Technologies, LTD
*Date de sortie*01/17/2006
*Version*3.14
*Taille de ROM*512 KB*AMD Sempron(tm) Processor 3000+ CPU:0**Spécification*AMD Sempron(tm) Processor 3000+
*Vitesse actuelle (SMBIOS)*1800 MHz
*Cache L1*128 KB
*Cache L2*128 KB
------------------------------------------------------------------------------
*Mémoire*
------------------------------------------------------------------------------*Mémoire de système**Capacité de mémoire maximale (Supportée)*2048 MB
*Mémoire physique totale*446 MB
*Mémoire physique disponible*11 MB
*Mémoire virtuelle totale*2047 MB
*Mémoire virtuelle disponible*2007 MB
*Espace du fichier page*1053 MB
*Fichier page*c:\pagefile.sys
*Nombre total de puces de mémoire*1*512 MB DDR-SDRAM (PC3200 / 400 MHz)**Taille de mémoire*512 MB
*Type de mémoire*DDR-SDRAM (PC3200 / 400 MHz)
*Fabricant de mémoire*Hyundai Electronics
*Date de fabrication de la mémoire*Semaine 9, Année 2006
*Numéro de la pièce de mémoire*HYMD564 646BP8JD43
*Code de révision de mémoire*4141
------------------------------------------------------------------------------
*Répertoires*
------------------------------------------------------------------------------
*Répertoire de Windows*C:\WINDOWS
*Répertoire du système*C:\WINDOWS\system32
------------------------------------------------------------------------------
*Disque local*
------------------------------------------------------------------------------*Disque dur - WDC WD2000JS-60NCB1**Révision du firmware*Secondary Controller - Master drive
*Numéro de modèle*WDC WD2000JS-60NCB1
*Numéro de série*WD-WCANL1300876
*Température*46 C
*Taille du tampon*8192 KB
*Version du contrôleur*10.02E02
*Pilote*c:\windows\system32\drivers\disk.sys
*Version*5.1.2535.0, 7-1-2001*PRESARIO**Lettre du lecteur*C
*Capacité disponible du disque dur*180.97 GB
*Espace utilisé du disque dur*37.58 GB
*Espace inutilisé du disque dur*143.39 GB
*Système de fichiers*NTFS
*Longueur maximale du nom de fichier*255 Caractères*PRESARIO_RP**Lettre du lecteur*D
*Capacité disponible du disque dur*5.32 GB
*Espace utilisé du disque dur*4.73 GB
*Espace inutilisé du disque dur*601.68 MB
*Système de fichiers*FAT32
*Longueur maximale du nom de fichier*255 Caractères
------------------------------------------------------------------------------
*Lecteur CD-ROM*
------------------------------------------------------------------------------*HL-DT-ST DVDRRW GCA-4164B**Version du contrôleur*Master
*Lettre du lecteur*E
*Niveau de révision du produit*H.I0
*Support lisible*CD, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+R DL, DVD+RW
*Support eneregistrable*CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+R DL, DVD+RW
*Pilote*c:\windows\system32\drivers\cdrom.sys
*Version*5.1.2535.0, 7-1-2001
*Strategie d'écriture*TAO SAO RAW-MS RAW
------------------------------------------------------------------------------
*Affichage*
------------------------------------------------------------------------------*Écran Plug-and-Play**Mode*1280 x 1024 (32-bit) (60 Hz)
*Date de fabrication*Semaine 32, Année 2002
*Type du signal*Analogue
------------------------------------------------------------------------------
*Carte vidéo*
------------------------------------------------------------------------------*ATI RADEON XPRESS 200 Series**Fabricant*ATI Technologies Inc.
*Type de la puce de carte vidéo*ATI RADEON XPRESS 200 Series (0x5954)
*Mémoire de la carte vidéo*256.00 MB
*BIOS de carte vidéo*BK-ATI VER008.043I.008.000
*Pilote*c:\windows\system32\drivers\ati2mtag.sys
*Version*8.17.0.0, 8-13-2005
------------------------------------------------------------------------------
*Carte son*
------------------------------------------------------------------------------*Realtek AC'97 Audio**Fabricant*Realtek
*Pilote*c:\windows\system32\drivers\alcxwdm.sys
*Version*5.10.0.5910, 8-29-2005
------------------------------------------------------------------------------
*Carte réseau*
------------------------------------------------------------------------------*Realtek RTL8139/810x Family Fast Ethernet NIC**Adresse MAC*00:17:31:24:94:40
*Adresse IP*192.168.2.2
*Adresse IP Gateway*192.168.2.1
*Vitesse*100 Megabits par seconde
*Pilote*c:\windows\system32\drivers\rtnicxp.sys
*Version*5.635.923.2005, 12-6-2005
------------------------------------------------------------------------------
*Imprimantes*
------------------------------------------------------------------------------*Microsoft Office Document Image Writer Driver**Modèle*Microsoft Office Document Image Writer Driver
*Chemin*Microsoft Office Document Image Writer*HP PSC 1500 series**Modèle*HP PSC 1500 series
*Chemin*HP PSC 1500 series
------------------------------------------------------------------------------
*Clavier*
------------------------------------------------------------------------------*Enhanced Mulmedia PS/2 Keyboard**Fabricant*HP
*Chemin de pilote*c:\windows\system32\drivers\i8042prt.sys
*Version de Pilote*1.0.2.6, 1-13-2006
------------------------------------------------------------------------------
*Périphérique de pointage*
------------------------------------------------------------------------------*Souris compatible PS/2**Fabricant*Microsoft
*Fournisseur de Pilote*Microsoft
*Chemin de pilote*c:\windows\system32\drivers\i8042prt.sys
*Version de Pilote*5.1.2600.0, 7-1-2001
------------------------------------------------------------------------------
*Contrôleur USB*
------------------------------------------------------------------------------*Contrôleur hôte USB OpenHCD standard**Fabricant*(Contrôleur hôte USB standard)
*Pilote*c:\windows\system32\drivers\usbohci.sys
*Version*5.1.2600.2180, 7-1-2001*Contrôleur hôte USB OpenHCD standard**Fabricant*(Contrôleur hôte USB standard)
*Pilote*c:\windows\system32\drivers\usbohci.sys
*Version*5.1.2600.2180, 7-1-2001*Contrôleur hôte PCI vers USB standard étendu**Fabricant*(Contrôleur hôte USB standard)
*Pilote*c:\windows\system32\drivers\usbehci.sys
*Version*5.1.2600.0, 6-1-2002
Je vous remercie d'avance de me proposer une solution à mon souci,
Patapouf.
Hors ligne
#2 Le 07/01/2007, à 14:59
- houka
Re : Problème d'extinction / deconnection PC
As tu essayé la commande manuelle de reboot:
:Passe en mode console:
tape :
sudo shutdown -halt now
Pour Plus d'info :
man shutdown
Et si ca marche... tu peux faire un script ( c'est moins elegant que d'appuyer sur un bouton... mais bon...
#3 Le 07/01/2007, à 15:05
- Patapouf POuf
Re : Problème d'extinction / deconnection PC
Pourquoi faire un shutdown ? Je veux juste éteindre mon ordinateur correctement !
Hors ligne
#4 Le 07/01/2007, à 15:16
- houka
Re : Problème d'extinction / deconnection PC
Mais c'est ceque fait le shutdown.... il eteint l'ordi mais en ligne de commande.
Le pb que tu dois avoir doit etre dans les runlevel
#5 Le 07/01/2007, à 16:05
- Patapouf POuf
Re : Problème d'extinction / deconnection PC
J'essaie dès que j'ai accès à mon ordi... Merci en tout cas !
Mais c'est vrai que c'est pas hyper pratique... Si quelqu'un a une idée, il est le bienvenu !
Hors ligne
#6 Le 07/01/2007, à 18:39
- Patapouf POuf
Re : Problème d'extinction / deconnection PC
Ça ne marche toujours pas
Hors ligne
#7 Le 07/01/2007, à 20:23
- scorpio810
Re : Problème d'extinction / deconnection PC
dans grub apm=off acpi=force
fais une recherche dans le forum on en a déjà parlé maintes fois
"Le jour où tu découvres le Libre, tu sais que tu ne pourras jamais plus revenir en arrière..."
Hors ligne
#8 Le 08/01/2007, à 17:32
- Patapouf POuf
Re : Problème d'extinction / deconnection PC
Bonjour,
C'est à dire "dans GRUB" ? J'ai recherché dans le forum et je n'ai rien trouvé. C'est sûrement moi qui ne met pas de bon mots clefs, mais pour mon problème je ne sais pas lesquels mettre...
Je te remercie.
Hors ligne
#9 Le 08/01/2007, à 17:44
- fran
Re : Problème d'extinction / deconnection PC
bonjour
suite a un probleme du meme style
dans /boot/grub/menu.lst
j'ai rajouté apm=off acpi=force
Code:
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=fr_FR apm=off acpi=force
puis
Code:
sudo update-grub
ensuite j'ai redemarré , arreté 2 ou 3 fois et ça ne fonctionnait pas
j'ai tester un CTRL+ALT+"RETOUR ARRIERE"
et ok
Dernière modification par fran (Le 08/01/2007, à 17:44)
asus N53SN-SZ240V (7/archlinux/debian wheezy)
asus eeebox 1501 (archlinux)
Hors ligne
#10 Le 08/01/2007, à 19:44
- Patapouf POuf
Re : Problème d'extinction / deconnection PC
Merci, je vais essayer
Hors ligne
#11 Le 09/01/2007, à 08:27
- Patapouf POuf
Re : Problème d'extinction / deconnection PC
Bonjour,
Celà ne marche pas non plus !
Le Ctr + Alt + Backspace me met l'écran noir...
Dernière modification par Patapouf POuf (Le 09/01/2007, à 08:28)
Hors ligne
#12 Le 09/01/2007, à 11:11
- fran
Re : Problème d'extinction / deconnection PC
bonjour
Le Ctr + Alt + Backspace me met l'écran noir...
apres tu dois avoir a nouveau ton login
asus N53SN-SZ240V (7/archlinux/debian wheezy)
asus eeebox 1501 (archlinux)
Hors ligne
#13 Le 09/01/2007, à 14:10
- Patapouf POuf
Re : Problème d'extinction / deconnection PC
Non, quedalle. Impossible de faire quoi que ce soit. Je dois éteindre mon ordinateur manuellement via le bouton power de ma tour afin qu'il s'éteigne, et ainsi pouvoir le redémarrer et pouvoir m'en servir...
Hors ligne
#14 Le 09/01/2007, à 14:55
- fran
Re : Problème d'extinction / deconnection PC
bonjour
bizarre , normalement Ctr + Alt + Backspace c'est pour relancer X
tu peux poster ton /boot/grub/menu.lst pour voir
asus N53SN-SZ240V (7/archlinux/debian wheezy)
asus eeebox 1501 (archlinux)
Hors ligne
#15 Le 09/01/2007, à 18:38
- Patapouf POuf
Re : Problème d'extinction / deconnection PC
Ben à priori c'est X qui bug, dans ce cas là...
Le apm=off et api=force c'est le conseil précdent... mais ça marche pas
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda6 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,5)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash apm=off acpi=force
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery mode) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Ubuntu, kernel 2.6.15-27-k7
root (hd0,5)
kernel /boot/vmlinuz-2.6.15-27-k7 root=/dev/sda6 ro quiet splash apm=off acpi=force
initrd /boot/initrd.img-2.6.15-27-k7
savedefault
boot
title Ubuntu, kernel 2.6.15-27-k7 (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.15-27-k7 root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.15-27-k7
boot
title Ubuntu, kernel 2.6.15-27-386
root (hd0,5)
kernel /boot/vmlinuz-2.6.15-27-386 root=/dev/sda6 ro quiet splash apm=off acpi=force
initrd /boot/initrd.img-2.6.15-27-386
savedefault
boot
title Ubuntu, kernel 2.6.15-27-386 (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.15-27-386 root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.15-27-386
boot
title Ubuntu, kernel 2.6.15-26-386
root (hd0,5)
kernel /boot/vmlinuz-2.6.15-26-386 root=/dev/sda6 ro quiet splash apm=off acpi=force
initrd /boot/initrd.img-2.6.15-26-386
savedefault
boot
title Ubuntu, kernel 2.6.15-26-386 (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.15-26-386 root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.15-26-386
boot
title Ubuntu, memtest86+
root (hd0,5)
kernel /boot/memtest86+.bin
boot
### END DEBIAN AUTOMAGIC KERNELS LIST
Que ce soit avec le kernel k7 ou 386, même problème...
Dernière modification par Patapouf POuf (Le 09/01/2007, à 18:41)
Hors ligne
#16 Le 09/01/2007, à 20:00
- fran
Re : Problème d'extinction / deconnection PC
salut
je ne vois rien d'anormal , la modif est la meme que la mienne
voir le post que j'avias posté , http://forum.ubuntu-fr.org/viewtopic.php?id=74305
mon /boot/grub/menu.lst y est , et je ne vois pas de difference .
en esperant que quelqu'un ai une solution
Dernière modification par fran (Le 09/01/2007, à 20:01)
asus N53SN-SZ240V (7/archlinux/debian wheezy)
asus eeebox 1501 (archlinux)
Hors ligne
#17 Le 09/01/2007, à 22:11
- Patapouf POuf
Re : Problème d'extinction / deconnection PC
Je vais essayer de lire le topic dès que j'aurais le temps.
Si quelqu'un a une idée, je le remercie d'avance.
Hors ligne
#18 Le 10/01/2007, à 13:28
- Patapouf POuf
Re : Problème d'extinction / deconnection PC
Mon Xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Écran générique"
HorizSync 28.0 - 64.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon Xpress 200 (RS480)"
Driver "ati"
BusID "PCI:1:5:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon Xpress 200 (RS480)"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Hors ligne