Pages : 1
#1 Le 09/01/2007, à 10:25
- Berneri
[edgy] Température processeur
Bonjour tout le monde, j'ai mis à jour ma dapper vers edgy hier, tout s'est bien passé, aucun problème. Le seul souci que j'ai, c'est qu'alors que sous dapper mon processeur, quand il n'était pas utilisé avait une température de 50°C, il est actuellement, et dans les mêmes conditions (i.e. pratiquement sans utilisation) autour de 59-60°C. De plus; il a l'air d'être plus sollicité, notamment par X que lorsque j'étais sous dapper.
Ma configuration est
Portable Asus A4G, P4 3,2 Ghz
CG : Ati Mobility 9700, driver fglrx.
un petit dmesg :
[17179569.184000] Linux version 2.6.15-26-686 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Sep 8 20:16:40 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[17179569.184000] BIOS-e820: 000000003ffd0000 - 000000003ffdf000 (ACPI data)
[17179569.184000] BIOS-e820: 000000003ffdf000 - 0000000040000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262096
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32720 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f7570
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x11000402 MSFT 0x00000097) @ 0x3ffd0000
[17179569.184000] ACPI: FADT (v002 A M I OEMFACP 0x11000402 MSFT 0x00000097) @ 0x3ffd0200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x11000402 MSFT 0x00000097) @ 0x3ffd0390
[17179569.184000] ACPI: OEMB (v001 A M I AMI_OEM 0x11000402 MSFT 0x00000097) @ 0x3ffdf040
[17179569.184000] ACPI: DSDT (v001 1ABOK 1ABOK003 0x00000003 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=4e16b90a-7f7f-4e0c-9b1c-2f347d9d44f6 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 3200.680 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.732000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.732000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.784000] Memory: 1026708k/1048384k available (2115k kernel code, 20964k reserved, 595k data, 332k init, 130880k highmem)
[17179571.784000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.864000] Calibrating delay using timer specific routine.. 6406.02 BogoMIPS (lpj=12812049)
[17179571.864000] Security Framework v1.0.0 initialized
[17179571.864000] SELinux: Disabled at boot.
[17179571.864000] Mount-cache hash table entries: 512
[17179571.864000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[17179571.864000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[17179571.864000] monitor/mwait feature present.
[17179571.864000] using mwait in idle threads.
[17179571.864000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179571.864000] CPU: L2 cache: 1024K
[17179571.864000] CPU: Hyper-Threading is disabled
[17179571.864000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000459d 00000000 00000000
[17179571.864000] mtrr: v2.0 (20020519)
[17179571.864000] Enabling fast FPU save and restore... done.
[17179571.864000] Enabling unmasked SIMD FPU exception support... done.
[17179571.864000] Checking 'hlt' instruction... OK.
[17179571.880000] SMP alternatives: switching to UP code
[17179571.880000] checking if image is initramfs... it is
[17179572.900000] Freeing initrd memory: 7153k freed
[17179572.916000] ACPI: Looking for DSDT ... not found!
[17179572.948000] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
[17179572.948000] SMP alternatives: switching to SMP code
[17179572.948000] Booting processor 1/1 eip 3000
[17179572.956000] Initializing CPU#1
[17179573.040000] Calibrating delay using timer specific routine.. 6400.72 BogoMIPS (lpj=12801451)
[17179573.040000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[17179573.040000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[17179573.040000] monitor/mwait feature present.
[17179573.040000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179573.040000] CPU: L2 cache: 1024K
[17179573.040000] CPU: Hyper-Threading is disabled
[17179573.040000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000459d 00000000 00000000
[17179573.040000] CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
[17179573.040000] Total of 2 processors activated (12806.75 BogoMIPS).
[17179573.040000] ENABLING IO-APIC IRQs
[17179573.040000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.184000] checking TSC synchronization across 2 CPUs: passed.
[17179573.188000] Brought up 2 CPUs
[17179573.188000] NET: Registered protocol family 16
[17179573.188000] EISA bus registered
[17179573.188000] ACPI: bus type pci registered
[17179573.188000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[17179573.188000] PCI: Using configuration type 1
[17179573.188000] ACPI: Subsystem revision 20051216
[17179573.212000] ACPI: Interpreter enabled
[17179573.212000] ACPI: Using IOAPIC for interrupt routing
[17179573.212000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.212000] PCI: Probing PCI hardware (bus 00)
[17179573.216000] Uncovering SIS963 that hid as a SIS503 (compatible=1)
[17179573.216000] Enabling SiS 96x SMBus.
[17179573.216000] Boot video device is 0000:01:00.0
[17179573.216000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.220000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179573.224000] ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
[17179573.224000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179573.224000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179573.228000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[17179573.228000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
[17179573.228000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[17179573.228000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12 14 15)
[17179573.228000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179573.228000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[17179573.228000] ACPI: Power Resource [GFAN] (off)
[17179573.228000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.228000] pnp: PnP ACPI init
[17179573.232000] pnp: PnP ACPI: found 15 devices
[17179573.232000] PnPBIOS: Disabled by ACPI PNP
[17179573.232000] PCI: Using ACPI for IRQ routing
[17179573.232000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179573.240000] pnp: 00:07: ioport range 0xa00-0xa0f has been reserved
[17179573.240000] pnp: 00:09: ioport range 0x900-0x90f has been reserved
[17179573.240000] pnp: 00:09: ioport range 0xc10-0xc1f has been reserved
[17179573.240000] PCI: Bridge: 0000:00:01.0
[17179573.240000] IO window: c000-cfff
[17179573.240000] MEM window: dfe00000-dfefffff
[17179573.240000] PREFETCH window: cfd00000-dfcfffff
[17179573.240000] PCI: Bus 2, cardbus bridge: 0000:00:09.0
[17179573.240000] IO window: 00001000-000010ff
[17179573.240000] IO window: 00001400-000014ff
[17179573.240000] PREFETCH window: 50000000-51ffffff
[17179573.240000] MEM window: 52000000-53ffffff
[17179573.240000] PCI: Bus 6, cardbus bridge: 0000:00:09.1
[17179573.240000] IO window: 00001800-000018ff
[17179573.240000] IO window: 00001c00-00001cff
[17179573.240000] PREFETCH window: 54000000-55ffffff
[17179573.240000] MEM window: 56000000-57ffffff
[17179573.240000] PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
[17179573.240000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179573.240000] ACPI: PCI Interrupt 0000:00:09.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179573.240000] audit: initializing netlink socket (disabled)
[17179573.240000] audit(1168329571.236:1): initialized
[17179573.240000] highmem bounce pool size: 64 pages
[17179573.240000] VFS: Disk quotas dquot_6.5.1
[17179573.240000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.240000] Initializing Cryptographic API
[17179573.240000] io scheduler noop registered
[17179573.240000] io scheduler anticipatory registered
[17179573.240000] io scheduler deadline registered
[17179573.240000] io scheduler cfq registered
[17179573.240000] isapnp: Scanning for PnP cards...
[17179573.592000] isapnp: No Plug & Play device found
[17179573.612000] Real Time Clock Driver v1.12
[17179573.612000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179573.616000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179573.616000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179573.616000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179573.616000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179573.616000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179573.616000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.616000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179573.616000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.620000] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 185
[17179573.620000] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[17179573.620000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.620000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.620000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.620000] mice: PS/2 mouse device common for all mice
[17179573.620000] EISA: Probing bus 0 at eisa.0
[17179573.620000] Cannot allocate resource for EISA slot 1
[17179573.620000] EISA: Detected 0 cards.
[17179573.620000] NET: Registered protocol family 2
[17179573.672000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.672000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
[17179573.672000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[17179573.676000] TCP: Hash tables configured (established 262144 bind 65536)
[17179573.676000] TCP reno registered
[17179573.676000] TCP bic registered
[17179573.676000] NET: Registered protocol family 1
[17179573.676000] NET: Registered protocol family 8
[17179573.676000] NET: Registered protocol family 20
[17179573.676000] Starting balanced_irq
[17179573.676000] Using IPI No-Shortcut mode
[17179573.676000] ACPI wakeup devices:
[17179573.676000] AC97 MC97 MAC CBS0 P394 FMEM EUSB USB USB2 USB3
[17179573.676000] ACPI: (supports S0 S1 S3 S4 S5)
[17179573.676000] Freeing unused kernel memory: 332k freed
[17179573.780000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.748000] Capability LSM initialized
[17179574.784000] ACPI: Fan [FN00] (off)
[17179574.784000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179574.788000] ACPI: Processor [CPU2] (supports 8 throttling states)
[17179574.788000] ACPI: Thermal Zone [THRM] (28 C)
[17179575.244000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[17179575.244000] SIS5513: chipset revision 0
[17179575.244000] SIS5513: not 100% native mode: will probe irqs later
[17179575.244000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[17179575.244000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[17179575.244000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[17179575.244000] Probing IDE interface ide0...
[17179575.984000] hda: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
[17179576.692000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.700000] Probing IDE interface ide1...
[17179576.992000] hdc: SAMSUNG HM100JC, ATA DISK drive
[17179577.668000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.796000] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179577.796000] Uniform CD-ROM driver Revision: 3.20
[17179577.800000] hdc: max request size: 1024KiB
[17179577.800000] hdc: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
[17179577.800000] hdc: cache flushes supported
[17179577.800000] hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 hdc8 hdc9 > hdc4
[17179578.408000] usbcore: registered new driver usbfs
[17179578.408000] usbcore: registered new driver hub
[17179578.408000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179578.408000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 193
[17179578.408000] ohci_hcd 0000:00:03.0: OHCI Host Controller
[17179578.428000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[17179578.428000] ohci_hcd 0000:00:03.0: irq 193, io mem 0xdfffd000
[17179578.460000] ieee1394: Initialized config rom entry `ip1394'
[17179578.488000] hub 1-0:1.0: USB hub found
[17179578.488000] hub 1-0:1.0: 3 ports detected
[17179578.596000] ACPI: PCI Interrupt 0000:00:03.1[b] -> GSI 21 (level, low) -> IRQ 201
[17179578.596000] ohci_hcd 0000:00:03.1: OHCI Host Controller
[17179578.616000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[17179578.616000] ohci_hcd 0000:00:03.1: irq 201, io mem 0xdfffe000
[17179578.676000] hub 2-0:1.0: USB hub found
[17179578.676000] hub 2-0:1.0: 3 ports detected
[17179578.784000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[17179578.784000] ACPI: PCI Interrupt 0000:00:09.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179578.784000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 209
[17179578.788000] ehci_hcd 0000:00:03.3: EHCI Host Controller
[17179578.788000] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[17179578.788000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
[17179578.788000] ehci_hcd 0000:00:03.3: irq 209, io mem 0xdffff000
[17179578.788000] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179578.788000] hub 3-0:1.0: USB hub found
[17179578.788000] hub 3-0:1.0: 6 ports detected
[17179578.836000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[185] MMIO=[dfffb800-dfffbfff] Max Packet=[2048]
[17179578.948000] cdrom: open failed.
[17179578.952000] cdrom: open failed.
[17179579.180000] EXT3-fs: mounted filesystem with ordered data mode.
[17179579.180000] kjournald starting. Commit interval 5 seconds
[17179579.188000] usb 3-6: new high speed USB device using ehci_hcd and address 2
[17179580.124000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000323dd41]
[17179596.416000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179596.416000] Yenta: CardBus bridge found at 0000:00:09.0 [1043:1927]
[17179596.460000] Linux agpgart interface v0.101 (c) Dave Jones
[17179596.488000] agpgart: Detected SiS 648 chipset
[17179596.496000] agpgart: AGP aperture is 64M @ 0xe0000000
[17179596.556000] Yenta: ISA IRQ mask 0x04b8, PCI irq 169
[17179596.556000] Socket status: 30000006
[17179596.556000] ACPI: PCI Interrupt 0000:00:09.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179596.556000] Yenta: CardBus bridge found at 0000:00:09.1 [1043:1927]
[17179596.688000] Yenta: ISA IRQ mask 0x04b8, PCI irq 177
[17179596.688000] Socket status: 30000006
[17179597.216000] parport: PnPBIOS parport detected.
[17179597.216000] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[17179597.228000] input: PC Speaker as /class/input/input1
[17179597.248000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179597.252000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179597.276000] sis900.c: v1.08.09 Sep. 19 2005
[17179597.276000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 217
[17179597.280000] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[17179597.292000] 0000:00:04.0: Using transceiver found at address 1 as default
[17179597.292000] eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 217, 00:11:2f:eb:60:08.
[17179597.340000] irda_init()
[17179597.340000] NET: Registered protocol family 23
[17179597.380000] i2c-sis96x version 1.0.0
[17179597.380000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[17179597.380000] sis96x_smbus 0000:00:02.1: SMBus registers 0x0c00-0x0c1f already in use!
[17179597.380000] sis96x_smbus: probe of 0000:00:02.1 failed with error -22
[17179597.688000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008
[17179597.700000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 185
[17179597.728000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179597.748000] ts: Compaq touchscreen protocol output
[17179598.148000] cs: IO port probe 0x100-0x3af: clean.
[17179598.152000] cs: IO port probe 0x100-0x3af: clean.
[17179598.152000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
[17179598.152000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
[17179598.152000] cs: IO port probe 0x820-0x8ff: excluding 0x828-0x887 0x898-0x89f
[17179598.156000] cs: IO port probe 0x820-0x8ff: excluding 0x828-0x887 0x898-0x89f
[17179598.156000] cs: IO port probe 0xc00-0xcf7: clean.
[17179598.156000] cs: IO port probe 0xc00-0xcf7: clean.
[17179598.156000] cs: IO port probe 0xa00-0xaff: clean.
[17179598.156000] cs: IO port probe 0xa00-0xaff: clean.
[17179598.528000] intel8x0_measure_ac97_clock: measured 59478 usecs
[17179598.528000] intel8x0: clocking to 48000
[17179598.640000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179598.644000] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[17179598.644000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0
[17179598.708000] lp0: using parport0 (interrupt-driven).
[17179598.772000] SCSI subsystem initialized
[17179598.792000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179598.792000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179598.792000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179598.888000] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[17179598.928000] ndiswrapper version 1.8 loaded (preempt=yes,smp=yes)
[17179598.944000] ndiswrapper (wrapper_init:173): loadndiswrapper failed (32512); check system log for messages from 'loadndisdriver'
[17179598.944000] ndiswrapper (wrapper_init:180): ndiswrapper: initialization failed
[17179599.036000] Adding 1052216k swap on /dev/disk/by-uuid/b7c15ac5-e97d-4062-b9b1-c206ea569192. Priority:-1 extents:1 across:1052216k
[17179599.252000] EXT3 FS on hdc2, internal journal
[17179599.396000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179599.396000] md: bitmap version 4.39
[17179599.560000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179599.616000] eth0: Media Link On 100mbps full-duplex
[17179600.748000] cdrom: open failed.
[17179601.760000] kjournald starting. Commit interval 5 seconds
[17179601.760000] EXT3 FS on hdc7, internal journal
[17179601.760000] EXT3-fs: mounted filesystem with ordered data mode.
[17179601.760000] kjournald starting. Commit interval 5 seconds
[17179601.760000] EXT3 FS on hdc1, internal journal
[17179601.760000] EXT3-fs: mounted filesystem with ordered data mode.
[17179601.764000] kjournald starting. Commit interval 5 seconds
[17179601.764000] EXT3 FS on hdc6, internal journal
[17179601.764000] EXT3-fs: mounted filesystem with ordered data mode.
[17179601.768000] kjournald starting. Commit interval 5 seconds
[17179601.768000] EXT3 FS on hdc5, internal journal
[17179601.768000] EXT3-fs: mounted filesystem with ordered data mode.
[17179601.768000] kjournald starting. Commit interval 5 seconds
[17179601.768000] EXT3 FS on hdc8, internal journal
[17179601.768000] EXT3-fs: mounted filesystem with ordered data mode.
[17179601.772000] kjournald starting. Commit interval 5 seconds
[17179601.772000] EXT3 FS on hdc4, internal journal
[17179601.772000] EXT3-fs: mounted filesystem with ordered data mode.
[17179602.748000] NET: Registered protocol family 10
[17179602.748000] lo: Disabled Privacy Extensions
[17179602.748000] IPv6 over IPv4 tunneling driver
[17179603.692000] NET: Registered protocol family 17
[17179605.952000] ndiswrapper version 1.8 loaded (preempt=yes,smp=yes)
[17179605.952000] ndiswrapper (wrapper_init:173): loadndiswrapper failed (32512); check system log for messages from 'loadndisdriver'
[17179605.952000] ndiswrapper (wrapper_init:180): ndiswrapper: initialization failed
[17179606.000000] ndiswrapper version 1.8 loaded (preempt=yes,smp=yes)
[17179606.020000] ndiswrapper (wrapper_init:173): loadndiswrapper failed (32512); check system log for messages from 'loadndisdriver'
[17179606.036000] ndiswrapper (wrapper_init:180): ndiswrapper: initialization failed
[17179606.060000] ndiswrapper version 1.8 loaded (preempt=yes,smp=yes)
[17179606.080000] ndiswrapper (wrapper_init:173): loadndiswrapper failed (32512); check system log for messages from 'loadndisdriver'
[17179606.096000] ndiswrapper (wrapper_init:180): ndiswrapper: initialization failed
[17179606.124000] ndiswrapper version 1.8 loaded (preempt=yes,smp=yes)
[17179606.144000] ndiswrapper (wrapper_init:173): loadndiswrapper failed (32512); check system log for messages from 'loadndisdriver'
[17179606.160000] ndiswrapper (wrapper_init:180): ndiswrapper: initialization failed
[17179608.380000] ACPI: AC Adapter [AC0] (on-line)
[17179608.464000] ACPI: Battery Slot [BAT0] (battery present)
[17179608.516000] Asus Laptop ACPI Extras version 0.30
[17179608.516000] A4G model detected, supported
[17179608.540000] ACPI: Power Button (FF) [PWRF]
[17179608.540000] ACPI: Sleep Button (CM) [SLPB]
[17179608.540000] ACPI: Lid Switch [LID]
[17179608.540000] ACPI: Power Button (CM) [PWRB]
[17179608.616000] ibm_acpi: ec object not found
[17179608.652000] pcc_acpi: loading...
[17179608.756000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[17179613.580000] eth0: no IPv6 routers present
[17179616.972000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 217
[17179618.252000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179618.252000] apm: disabled - APM is not SMP safe.
[17179618.272000] [fglrx:firegl_unlock] *ERROR* Process 4861 using kernel context 0
[17179626.268000] ip_tables: (C) 2000-2002 Netfilter core team
[17179626.412000] Netfilter messages via NETLINK v0.30.
[17179626.436000] ip_conntrack version 2.4 (8190 buckets, 65520 max) - 232 bytes per conntrack
[17179632.400000] device eth0 entered promiscuous mode
[17179641.232000] Bluetooth: Core ver 2.8
[17179641.232000] NET: Registered protocol family 31
[17179641.232000] Bluetooth: HCI device and connection manager initialized
[17179641.232000] Bluetooth: HCI socket layer initialized
[17179641.268000] Bluetooth: L2CAP ver 2.8
[17179641.268000] Bluetooth: L2CAP socket layer initialized
[17179641.304000] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1
[17179641.356000] Bluetooth: RFCOMM socket layer initialized
[17179641.356000] Bluetooth: RFCOMM TTY layer initialized
[17179641.356000] Bluetooth: RFCOMM ver 1.7
[17179772.080000] Inbound IN=eth0 OUT= MAC=00:11:2f:eb:60:08:00:14:1c:ab:20:52:08:00 SRC=172.18.7.38 DST=129.69.102.45 LEN=56 TOS=0x00 PREC=0x00 TTL=253 ID=19656 PROTO=ICMP TYPE=3 CODE=13 [SRC=129.69.102.45 DST=82.211.81.145 LEN=76 TOS=0x00 PREC=0x00 TTL=60 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56 ]
[17180160.088000] Inbound IN=eth0 OUT= MAC=00:11:2f:eb:60:08:00:14:1c:ab:20:52:08:00 SRC=172.18.7.38 DST=129.69.102.45 LEN=56 TOS=0x00 PREC=0x00 TTL=253 ID=24937 PROTO=ICMP TYPE=3 CODE=13 [SRC=129.69.102.45 DST=82.211.81.145 LEN=76 TOS=0x00 PREC=0x00 TTL=60 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56 ]
olivier@olivier-laptop:~$Voila, je poste aussi mon xorg.conf, à tout hasard:
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# === ATI device section ===
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
### EOF ###
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Server Layout"
Screen "Screen0" 0 0
Screen "aticonfig-Screen[1]" RightOf "Screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Synaptics Touchpad" "SendCoreEvents"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/share/X11/fonts/local/"
# FontPath "/usr/share/X11/fonts/misc/"
# FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/share/X11/fonts/Type1/"
# FontPath "/usr/share/X11/fonts/Speedo/"
# FontPath "/usr/share/X11/fonts/75dpi/"
# FontPath "/usr/share/X11/fonts/100dpi/"
# FontPath "/usr/lib/X11/fonts/cyrillic"
# FontPath "/usr/lib/X11/fonts/CID"
# paths to defoma fonts
# FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the Type1 and FreeType font modules
# This loads synaptics module
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
Load "synaptics"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
Option "SHMConfig" "on"
EndSection
Section "Monitor"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
Identifier "Monitor0"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[1]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
# vendor=1002, device=4e50
Identifier "ATI Graphics Adapter"
Driver "fglrx"
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
Option "DesktopSetup" "clone"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "off"
# === OpenGL Overlay ===
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "2"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "agplock=0"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[1]"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
#Option "backingstore"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
# initial origin if mode is smaller than desktop
# Virtual 1280 1024
Viewport 0 0
Depth 24
Modes "1280x800" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[1]"
Device "aticonfig-Device[1]"
Monitor "aticonfig-Monitor[1]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
# Access to OpenGL ICD is allowed for all users:
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Disabled"
EndSectiondonc si quelqu'un a une idée, merci d'avance
edit : sous dapper, depuis la dernière mise à jour du kernel 2.6.15.-27, j´avais des plantages une fois par jour, c´est qui m´a fait faire l´upgrade vers edgy. J´ai testé la mémoire (neuve d´ailleurs), elle est ok. Quand au DD (aussi neuf que la ram), le selftest de smart ne me renvoi aucune erreur non plus...
Dernière modification par Berneri (Le 10/01/2007, à 16:27)
"La liberté d'autrui étend la mienne à l'infini."
M. Bakounine
« Le capitalisme ne se discute pas, il se détruit. »
Buenaventura Durruti
Hors ligne
#2 Le 10/01/2007, à 15:29
- Berneri
Re : [edgy] Température processeur
un pt'tit up
"La liberté d'autrui étend la mienne à l'infini."
M. Bakounine
« Le capitalisme ne se discute pas, il se détruit. »
Buenaventura Durruti
Hors ligne
#3 Le 10/01/2007, à 15:45
- ghimli
Re : [edgy] Température processeur
A tout hasard, tu as essayé de nettoyer les ventilos ? 
Non ne rigolez pas, j'ai un copain gentooiste qui a gagné 15° en les nettoyant...
Ghimli, Ubuntu addicted
Hors ligne
#4 Le 10/01/2007, à 16:01
- Berneri
Re : [edgy] Température processeur
j'y ai pensé mais je n'ai pas encore démonté la bête. Ceci dit, sous dapper, c'était parfait. Et j'ai essayé opensuse et mandriva (j'ai un gros DD) hier, pas un bruit. Mais je vais quand même essayer, les plantages sous dapper étaient peut-être dû à ça.
"La liberté d'autrui étend la mienne à l'infini."
M. Bakounine
« Le capitalisme ne se discute pas, il se détruit. »
Buenaventura Durruti
Hors ligne
#5 Le 10/01/2007, à 16:20
- ghimli
Re : [edgy] Température processeur
essaie de regarder si t'as pas un processus qui te prend 99% du cpu sinon (avec top par exemple). Moi j'ai eu un soucis avec mail-notification qui prend 100% du cpu quand le réseau est inaccessible par exemple...
Ghimli, Ubuntu addicted
Hors ligne
#6 Le 10/01/2007, à 16:25
- Berneri
Re : [edgy] Température processeur
non, au repos le maximum est 3,5 % (Xorg). C'est ça que je trouve bizarre : aucun processus n'est signalé comme faisant tourner le cpu de manière euh... excessive. Bref, je ne comprends pas.
"La liberté d'autrui étend la mienne à l'infini."
M. Bakounine
« Le capitalisme ne se discute pas, il se détruit. »
Buenaventura Durruti
Hors ligne
Pages : 1