Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 19/01/2007, à 10:16

chlag

[Grub]: chargement de trois systèmes d'exploitation.

Bonjour,
J'ai deux disques dures, dans mon ordinateur fixe:
Sur le premier DD, maitre, sont installés les deux systèmes d'exploitation, windows xp et ubuntu LTS.
Sur le deuxième DD, esclave, est installée la Fedora Core version 6.

Aupavavant, avant l'installation de la Fedora, il y avait installée la Debian (sur le deuxieme DD) que j'ai désinstallé pour installer la Fedora, bien sur, et le grub de ubuntu(que je vais vous donner, aprés, le fichier de configuration), chargeait, sans problème les 3 O.S.(windows, ubuntu, debian).

Mais, aprés désinstallation de la debian et installation de la Fedora, grub(installé sur le 1er secteur du MBR du 1er DD), de ubuntu, ne charge que windows et ubuntu(c'est normal) [tandis que le grub de la Fedora n'a rien chargé, même pas la Fedora, ...., il n'y a rien même pas un menu).
Bien, j'arrive, ....., au début, avant l'installation de la Fedora et donc avant la désinstallation de la débian, j'ai pris le soin de copier le /boot/grub/menu.lst de ubuntu:


# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default        0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout        10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title        Windows 95/98/NT/2000
# root        (hd0,0)
# makeactive
# chainloader    +1
#
# title        Linux
# root        (hd0,1)
# kernel    /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/hda2 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,1)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery mode) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title        Ubuntu, kernel 2.6.15-23-386
root        (hd0,1)
kernel        /boot/vmlinuz-2.6.15-23-386 root=/dev/hda2 ro quiet splash
initrd        /boot/initrd.img-2.6.15-23-386
savedefault
boot

title        Ubuntu, kernel 2.6.15-23-386 (recovery mode)
root        (hd0,1)
kernel        /boot/vmlinuz-2.6.15-23-386 root=/dev/hda2 ro single
initrd        /boot/initrd.img-2.6.15-23-386
boot

title        Ubuntu, memtest86+
root        (hd0,1)
kernel        /boot/memtest86+.bin
boot

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title        Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title        Microsoft Windows XP dition familiale
root        (hd0,0)
savedefault
makeactive
chainloader    +1


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/hdb1.
title        Debian GNU/Linux, kernel 2.6.8-2-386 (on /dev/hdb1)
root        (hd1,0)
kernel        /boot/vmlinuz-2.6.8-2-386 root=/dev/hdb1 ro
initrd        /boot/initrd.img-2.6.8-2-386
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/hdb1.
title        Debian GNU/Linux, kernel 2.6.8-2-386 (recovery mode) (on /dev/hdb1)
root        (hd1,0)
kernel        /boot/vmlinuz-2.6.8-2-386 root=/dev/hdb1 ro single
initrd        /boot/initrd.img-2.6.8-2-386
savedefault
boot

#fdisk -l

m'a donné:



Disk /dev/hda: 120.0 GB, 120060444672 bytes
255 heads, 63 sectors/track, 14596 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1       10305    82774881    7  HPFS/NTFS
/dev/hda2           10306       14417    33029640   83  Linux
/dev/hda3           14418       14596     1437817+   5  Extended
/dev/hda5           14418       14596     1437786   82  Linux swap / Solaris

Disk /dev/hdb: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hdb1   *           1       24133   193848291   83  Linux
/dev/hdb2           24134       24321     1510110    5  Extended
/dev/hdb5           24134       24321     1510078+  82  Linux swap / Solaris

#cat /boot/grub/device.map

donne:


(hd0)   /dev/hda
(hd1)   /dev/hdb

Maintenant, aprés installtion de la Fedora et à l'aide d'un CD knoppix(pour voir les differentes partitions), et en allant sur hdb (exactement hdb1), là où est installé
la Fedora, je peux lire le grub.conf de celle-ci(Fedora):



#grub.conf generated by nanaconda
#boot = /dev/hda

default=0
timeout=5
splashimage = (hd1,0)/grub/spalsh.xpm.gz
hiddenmenu
title Fedora Core (2.6.18-1.2798.fc6xen)
     root (hd1,0)
     kernel /xen.gz-2.6.18-1.2798.fc6
     module /vmlinuz-2.6.18-1.2798.fc6xen ro root=/dev/VolGroupe00/LogVol00 rhgb quiet
     module /initrd-2.6.18-1.2798.fc6xen.img

title Other
      rootnoverify (hd0,0)
      chainloader +1

Ma question est donc:

Comment dois-je réecrire le /boot/grub/menu.lst(de ubuntu, bien sur, puisque celui de la Fedora c'est impossible avec Knoppix), pour que je puisse avoir mes trois systèmes d'expoitation, windows xp, ubuntu et la Fedora ?
Merci d'avance pour l'aide.


Ubuntu 20.04.2 LTS  en double-boot avec: OpenSUSE Leap 15.3
"It is not about being the BEST but it is about being better than YESTERDAY"
"If you study you learn."(Einstein)

Hors ligne

#2 Le 19/01/2007, à 10:38

figaro

Re : [Grub]: chargement de trois systèmes d'exploitation.

Un chainloader vers la partition fedora devrait résoudre ce problème je pense.

title Fedora
rootnoverify (hd1,0)
chainloader +1

à rajouter dans le menu.lst d'Ubuntu à la place de l'entrée Debian

Dernière modification par figaro (Le 19/01/2007, à 10:45)


Le blog de figaro (astuces diverses et tutos Samba pour débutants)
Le blog de cep (astuces Linux avancées)
Debian Lenny 6.0.1, Ubuntu 10.04.2, Ubuntu Remix 9.10, Ubuntu Netbook 10.04

Hors ligne

#3 Le 19/01/2007, à 16:30

chlag

Re : [Grub]: chargement de trois systèmes d'exploitation.

Non, ça ne marche pas.


Ubuntu 20.04.2 LTS  en double-boot avec: OpenSUSE Leap 15.3
"It is not about being the BEST but it is about being better than YESTERDAY"
"If you study you learn."(Einstein)

Hors ligne

#4 Le 19/01/2007, à 16:34

figaro

Re : [Grub]: chargement de trois systèmes d'exploitation.

Rajoutes boot à la fin, il faut lui dire ce qu'il doit faire en l'occurence booter.

title Fedora
rootnoverify (hd1,0)
chainloader +1
boot

Dernière modification par figaro (Le 19/01/2007, à 17:16)


Le blog de figaro (astuces diverses et tutos Samba pour débutants)
Le blog de cep (astuces Linux avancées)
Debian Lenny 6.0.1, Ubuntu 10.04.2, Ubuntu Remix 9.10, Ubuntu Netbook 10.04

Hors ligne