#1 Le 27/12/2006, à 20:56
- LR
Problème de fréquence de rafraichissement
Salut,
Je suis passé à edgy sur mon PC secondaire (GeForce2 MX 440) et j'en ai profité pour installer le driver 9631 pour avoir beryl et les effets 3D.
J'ai toujours la sortie TV qui fonctionne (dual head) mais par contre, sur mon écran plat (17'), l'image est affreuse, ça fait vraiment mal aux yeux. Le problème vient sûrement de la fréquence de rafraîchissement.
Quand je fais Système/Préférences/Résolution de l'écran, j'ai le choix entre 50Mhz et 54Mhz. Je ne sais pas trop le quel est le pire/meilleur 
Quand je lance Applications/Outils Système/NVIDIA X Server Settings, j'ai le choix entre 60 et 75Mhz. Quand je sélectionne 60Mhz, ensuite dans Système/Préférences/Résolution de l'écran j'ai 91Mhz sélectionné et ça fait toujours mal aux yeux.
Quand je sélectionne 75Mhz dans NVIDIA X Server Settings, c'est un peu moins pire mais ça fait toujours mal aux yeux.
Comment faire pour avoir un fréquence de rafraichissement optimale ?
Merci d'avance
Lilian
Hors ligne
#2 Le 27/12/2006, à 21:02
- LR
Re : Problème de fréquence de rafraichissement
mon xorg.conf :
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Nov 9 17:55:20 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
#AJOUTE POUR LA SORTIE TV
#AJOUTE POUR LA SORTIE TV
#AJOUTE POUR LA SORTIE TV
#AJOUTE POUR LA SORTIE TV
Section "ServerLayout"
# InputDevice "Synaptics Touchpad"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
Screen 1 "TV" RightOf "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ch"
Option "XkbVariant" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "HP D8912"
Option "DPMS"
EndSection
Section "Monitor"
#Resolutions ecrans TV standard Pal
#Modeline "640x480x50" 20.20 640 656 800 800 480 482 483 505
#Modeline "800x600x50" 33.1584 800 840 986 1056 600 601 605 628
Identifier "TV_Monitor"
VendorName "Thomson"
ModelName "PAL TV"
HorizSync 30.0 - 50.0
VertRefresh 60.0 - 60.0
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
Driver "nvidia"
EndSection
Section "Device"
Identifier "TV_Device"
Driver "nvidia"
VendorName "Nvidia"
BusID "PCI:1:0:0"
Screen 1
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
Monitor "HP D8912"
DefaultDepth 24
Option "NoLogo" "true"
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "TV"
Device "TV_Device"
Monitor "TV_Monitor"
DefaultDepth 24
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-B"
Option "ConnectedMonitor" "TV"
Option "NoLogo" "true"
SubSection "Display"
#Modes "800x600x50"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionHors ligne
#3 Le 24/01/2007, à 16:30
- Foul
Re : Problème de fréquence de rafraichissement
en modifiant les modelines ? commande "gtf" en console 
Spécialiste en Mame :p
Hors ligne
#4 Le 27/01/2007, à 01:23
- LR
Re : Problème de fréquence de rafraichissement
Foul a écrit :
en modifiant les modelines ? commande "gtf" en console
Merci pour ta réponse,
j'ai essayé mais ça ne change rien. Voilà mon xorg.conf :
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Nov 9 17:55:20 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
#AJOUTE POUR LA SORTIE TV
#AJOUTE POUR LA SORTIE TV
#AJOUTE POUR LA SORTIE TV
#AJOUTE POUR LA SORTIE TV
Section "ServerLayout"
# InputDevice "Synaptics Touchpad"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
Screen 1 "TV" RightOf "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ch"
Option "XkbVariant" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "HP D8912"
Option "DPMS"
Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync
EndSection
Section "Monitor"
#Resolutions ecrans TV standard Pal
#Modeline "640x480x50" 20.20 640 656 800 800 480 482 483 505
#Modeline "800x600x50" 33.1584 800 840 986 1056 600 601 605 628
Identifier "TV_Monitor"
VendorName "Thomson"
ModelName "PAL TV"
HorizSync 30.0 - 50.0
VertRefresh 60.0 - 60.0
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
Driver "nvidia"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
EndSection
Section "Device"
Identifier "TV_Device"
Driver "nvidia"
VendorName "Nvidia"
BusID "PCI:1:0:0"
Screen 1
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
Monitor "HP D8912"
DefaultDepth 24
Option "NoLogo" "true"
SubSection "Display"
Depth 1
Modes "1600x1200_60.00" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200_60.00" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200_60.00" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200_60.00" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200_60.00" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200_60.00" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "TV"
Device "TV_Device"
Monitor "TV_Monitor"
DefaultDepth 24
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-B"
Option "ConnectedMonitor" "TV"
Option "NoLogo" "true"
SubSection "Display"
#Modes "800x600x50"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionHors ligne