#1 Le 31/01/2007, à 08:32
- StraToN
[Résolu] Grub modifie le disque dur correspondant à Ubuntu
Bonjour,
j'ai réinstallé Ubuntu hier soir, ainsi que grub. Je vous colle le résultat de fdisk -l pour vous donner une idée de ce à quoi ça ressemble :
Disque /dev/sda: 320.0 Go, 320072933376 octets
255 têtes, 63 secteurs/piste, 38913 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets
Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 1 38913 312568641 b W95 FAT32
Disque /dev/sdb: 81.9 Go, 81964302336 octets
255 têtes, 63 secteurs/piste, 9964 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets
Périphérique Amorce Début Fin Blocs Id Système
/dev/sdb1 * 1 9777 78533721 83 Linux
/dev/sdb2 9778 9964 1502077+ 5 Extended
/dev/sdb5 9778 9964 1502046 82 Linux swap / Solaris
Disque /dev/hdb: 60.0 Go, 60022480896 octets
255 têtes, 63 secteurs/piste, 7297 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets
Périphérique Amorce Début Fin Blocs Id Système
/dev/hdb1 * 1 7296 58605088+ 7 HPFS/NTFS
Au départ, grub considérait le disque dur /etc/sdb comme (hd2) et /etc/hdb1 comme (hd0), ce qui ma valu des erreurs 17 et 13 lors du boot. Or après recherche (à tâtons je dois dire), j'ai découvert que ca devrait etre l'inverse : /etc/sdb => (hd0) et /etc/hdb1 comme (hd2).
Malheureusement, grub persiste à modifier mon menu.lst de façon à remettre (hd2) pour Ubuntu ! Comment faire ?
Je vous colle le menu.lst déjà corrigé par moi, à la main.
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=56ee98ff-cad0-419f-9aac-d64da2ef8e36 ro
# kopt_2_6=root=/dev/sdb1 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd2,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=fr_FR
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Ubuntu, kernel 2.6.17-10-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.17-10-generic root=/dev/sdb1 ro quiet splash locale=fr_FR
initrd /boot/initrd.img-2.6.17-10-generic
quiet
savedefault
boot
title Ubuntu, kernel 2.6.17-10-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.17-10-generic root=/dev/sdb1 ro single
initrd /boot/initrd.img-2.6.17-10-generic
boot
title Ubuntu, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
boot
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hdb1
title Microsoft Windows XP Professionnel
root (hd2,0)
map (hd2) (hd0)
map (hd0) (hd2)
savedefault
chainloader +1
Merci de votre aide !
Dernière modification par StraToN (Le 31/01/2007, à 18:45)
Hors ligne
#2 Le 31/01/2007, à 15:47
- tellmewhy
Re : [Résolu] Grub modifie le disque dur correspondant à Ubuntu
Bonjour StraToN,
Tu devrais en priorité t'assurer de la manière dont Grub voit la géométrie de tes disques dur.
Dans cette mine d'or (le trésor de cep) :
http://www.cepcasa.info/divers
tu trouveras ce chapitre : Grub quelques détails :
http://www.cepcasa.info/blog/?p=15
Ensuite, ici :
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd2,0) ceci est la configuration par défaut, qui sera appliquée à
chaque sudo update-grub.:)
#3 Le 31/01/2007, à 18:45
- StraToN
Re : [Résolu] Grub modifie le disque dur correspondant à Ubuntu
Je n'avais pas vu cette ligne dans le menu.lst, je ne l'ai remarquée qu'au courant de l'apres-midi ; je l'ai modifiée et tout fonctionne à merveille.
Merci beaucoup !
Hors ligne