Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 10/02/2007, à 10:13

Fabienst

[Résolu] - Beryl sur xgl et driver ati proprio

Bonjour,

J'ai installé Beryl en suivant la doc, j'arrive à le démarrer pendant une session sous xgl gnome... le diamant rouge s'affiche bien sur la barre et j'ai accès à toutes les options mais impossible d'appliquer beryl !?

fabien@ubuntu:~$ beryl
**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : XGL

Checking Display :1.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Checking Screen 0 ...

Checking for GLX_SGIX_fbconfig                  : passed
Checking for GLX_EXT_texture_from_pixmap        : passed
Xlib:  extension "XFree86-DRI" missing on display ":1.0".
Checking for non power of two texture support   : failed

Support for non power of two textures missing
fabien@ubuntu:~$ beryl-manager
**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : XGL

Checking Display :1.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Checking Screen 0 ...

Checking for GLX_SGIX_fbconfig                  : passed
Checking for GLX_EXT_texture_from_pixmap        : passed

** (beryl-manager:4701): WARNING **: Beryl a reçu un signal de terminaison 11

Chose surprenante lors de la session xgl le résultat de glxinfo contredit fglrxinfo

fabien@ubuntu:~$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9550 Generic
OpenGL version string: 2.0.6286 (8.33.6)

fabien@ubuntu:~$  glxinfo | grep "direct rendering"
direct rendering: No

Alors que sur une session gnome normal "direct rending" il indique bien "Yes"

Voilà si vous avez une idée de mon problème...

Ci-dessous mon fichier xorg.conf:

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen         "Default Screen" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "latin9"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "AL1716"
	HorizSync    30.0 - 83.0
	VertRefresh  56.0 - 75.0
	Option	    "DPMS"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
	Monitor    "AL1716"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1152x864"
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
	Option	    "Composite" "disable"
EndSection

#2 Le 10/02/2007, à 11:28

Stardust

Re : [Résolu] - Beryl sur xgl et driver ati proprio

Bonjour

Il y a un bug dans la mise à jour de beryl, il y a plein de posts là dessus dans le forum

la solution est de désinstaller beryl et de réinstaller la version précédente:

sudo apt-get install beryl=0.1.99.2~0beryl1 beryl-core=0.1.99.2~0beryl1 beryl-manager=0.1.99.2~0beryl1 beryl-plugins=0.1.99.2~0beryl1 beryl-plugins-data=0.1.99.2~0beryl1 beryl-settings=0.1.99.2~0beryl1 beryl-settings-bindings=0.1.99.2~0beryl1 emerald=0.1.99.2~0beryl1 libberyldecoration0=0.1.99.2~0beryl1 libberylsettings0=0.1.99.2~0beryl1 libemeraldengine0=0.1.99.2~0beryl1 emerald-themes=0.1.99.2~0beryl1 -V

Je vois que tu as installé les drivers proprios de ta carte, attention à la mise à jour du noyau, jette un coup d'oeil à mon tuto en cas du plantage du serveur suite à la mise à jour du noyau:


http://forum.ubuntu-fr.org/viewtopic.php?pid=738785#p738785

Dernière modification par Stardust (Le 10/02/2007, à 11:35)


Hardware :Partie de l'ordinateur qui reçoit les coups quand le software se plante. Desproges.

In a world without walls and fences, who needs windows and gates ?

Hors ligne

#3 Le 10/02/2007, à 18:44

Fabienst

Re : [Résolu] - Beryl sur xgl et driver ati proprio

J'ai désinstallé beryl puis j'ai esssayé ta commande qui échoue et me dit:

E: Impossible de verrouiller /var/lib/dpkg/lock - open (11 Ressource temporairement non disponible)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
fabien@ubuntu:~$ sudo apt-get install beryl=0.1.99.2~0beryl1
E: Impossible de verrouiller /var/lib/dpkg/lock - open (11 Ressource temporairement non disponible)
E: Unable to loc

Voilà j'ai bien trouvé les anciens packets sur cette page:
http://www.beryl-project.org/releases.php

Mais je ne sais pas comment l'installer.

Sinon pour la dernière mise à jour du noyau j'ai pu remettre mes drivers ati proprio

Merci

#4 Le 10/02/2007, à 18:51

Fabienst

Re : [Résolu] - Beryl sur xgl et driver ati proprio

Chui vraiment con sur ce coup j'avais laissé le gestionnaire de packet synaptic ouvert...
...

Ca fonctionne !!!!!!!

Mais comment bloquer la requête de mise à jour ?


Merci wink

Dernière modification par Fabienst (Le 10/02/2007, à 19:00)

Hors ligne

#5 Le 10/02/2007, à 19:06

Stardust

Re : [Résolu] - Beryl sur xgl et driver ati proprio

c'est simple
tu commentes les lignes beryl dans ton fichier :sources.list

ensuite

sudo apt-get update

Dernière modification par Stardust (Le 10/02/2007, à 19:07)


Hardware :Partie de l'ordinateur qui reçoit les coups quand le software se plante. Desproges.

In a world without walls and fences, who needs windows and gates ?

Hors ligne

#6 Le 10/02/2007, à 19:26

Fabienst

Re : [Résolu] - Beryl sur xgl et driver ati proprio

Ok merci c'est tout bon smile

Hors ligne

#7 Le 10/02/2007, à 19:39

Stardust

Re : [Résolu] - Beryl sur xgl et driver ati proprio

je suis content pour toi

un petit résolu dans le titre du post serait le bienvenu


Hardware :Partie de l'ordinateur qui reçoit les coups quand le software se plante. Desproges.

In a world without walls and fences, who needs windows and gates ?

Hors ligne

#8 Le 10/02/2007, à 20:14

Fabienst

Re : [Résolu] - Beryl sur xgl et driver ati proprio

un petit résolu dans le titre du post serait le bienvenu

J'aimerai bien mais comme lorsque j'ai débuté le post je n'étais pas enregistré il m'est impossible d'éditer le premier envoi...

Avis aux modos wink

Encore merci... c'est vraiment impressionnant beryl !!!
Vista peut aller se réhabiller big_smile

A+ wink

*edit: ben le petit "résolu" à été mis lol

Dernière modification par Fabienst (Le 10/02/2007, à 20:18)

Hors ligne