Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 30/08/2005, à 00:31

visor

fréquence écran

Salut,

j'ai cet écran:

http://www.hyundaiq.com/pro_q770.asp

j'ai réglé ça fréquence à 75Hz en 1024 et lorsque je regarde les infos il n'est qu'a 60.1Hz donc je voudrais savoir quel réglage spéciale je dois faire?

Hors ligne

#2 Le 30/08/2005, à 00:38

Stemp

Re : fréquence écran

Salut,

Scanning Frequency     
Horizontal      30k ~ 70 kHz
Vertical     50 ~ 150 Hz

Donc dans ton fichier /etc/X11/xorg.cong
Dans la section "Monitor" tu ajoutes (ou modifies) les fréquences

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   30-70
    VertRefresh 50-150
    Option "DPMS"

«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

Hors ligne

#3 Le 30/08/2005, à 01:09

visor

Re : fréquence écran

erf  j'arrive pas a écrire dessus sad

j'ai fait ça pour avoir les droits:
root@ubuntu:/etc/X11 # chown user xorg.conf

mais toujours rien il ne veux pas enregistrer

Hors ligne

#4 Le 30/08/2005, à 01:13

Stemp

Re : fréquence écran

Si tu es en root, c'est pas la peine.

Tape juste : gedit xorg.conf ou nano xorg.conf

«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

Hors ligne

#5 Le 30/08/2005, à 01:13

gar

Re : fréquence écran

fait 

sudo gedit /etc/X11/xorg.conf

wink

" C'est pas parce qu'ils sont des millions à avoir tort qu'ils ont raison " .coluche
non mais ho! 
le blog du Gar[ouf]

Hors ligne

#6 Le 30/08/2005, à 01:23

visor

Re : fréquence écran

ça n'a rien changé!
faut que je redémarre?

Hors ligne

#7 Le 30/08/2005, à 01:39

BastNic

Re : fréquence écran

oui, au moins la session..

Hors ligne

#8 Le 30/08/2005, à 12:53

visor

Re : fréquence écran

j'ai redmarrer et maintenant il me dit qu'il ne peut plus démarrer serverX l'interface graphique!!!


Que faire?

Hors ligne

#9 Le 30/08/2005, à 13:04

Nanal

Re : fréquence écran

déja remet le owner à root via un chown et ensuite donne l'erreur qu'il te met exactement
cat /var/log/Xorg.0.log | grep EE (ou xorg.0.log utilise l'autocomplétion)

edit : cat EE -> grep EE

Dernière modification par Nanal (Le 30/08/2005, à 14:52)

Avatar : "the mirror of the sun" by bernie (deviantart.com)

Hors ligne

#10 Le 30/08/2005, à 13:14

visor

Re : fréquence écran

je voudrais bien le remettre tu peut me donner la ligne a taper stp

Hors ligne

#11 Le 30/08/2005, à 13:19

Nanal

Re : fréquence écran

sudo chown root /etc/X11/xorg.conf

edit : je te conseille d'utiliser sudo au lieu d'ouvrir des terminaux en root ça évite les erreurs malhencontreuse à cause d'un oubli de déconnexion par exemple.

Dernière modification par Nanal (Le 30/08/2005, à 13:19)

Avatar : "the mirror of the sun" by bernie (deviantart.com)

Hors ligne

#12 Le 30/08/2005, à 14:23

visor

Re : fréquence écran

j'ai taper la ligne que tu m'as donné mais ça n'as rien changé!??

Hors ligne

#13 Le 30/08/2005, à 14:25

visor

Re : fréquence écran

sinon le log c'est ça:

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.10-3mdksmp i686 [ELF]
Current Operating System: Linux localhost 2.6.11-6mdk #1 Tue Mar 22 16:04:32 CET 2005 i686
Build Date: 06 April 2005
    Before reporting problems, check http://wiki.X.Org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 15 15:30:31 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) |   |-->Monitor "monitor1"
(**) |   |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(**) Option "XkbOptions" "compose:rwin"
(**) XKB: options: "compose:rwin"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(II) Open APM successful
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.2
    X.Org Video Driver: 0.7
    X.Org XInput driver : 0.4
    X.Org Server Extension : 0.2
    X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7120 card 8086,7120 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7121 card 1462,2001 rev 03 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2415 card 1462,4001 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:02:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 1 I/O range:
    [0] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b]
    [1] -1    0    0x0000c400 - 0x0000c4ff (0x100) IX[b]
    [2] -1    0    0x0000c800 - 0x0000c8ff (0x100) IX[b]
    [3] -1    0    0x0000cc00 - 0x0000ccff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
    [0] -1    0    0xd4000000 - 0xd5ffffff (0x2000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:1:0) Intel Corp. 82810 CGC [Chipset Graphics Controller] rev 3, Mem @ 0xd0000000/26, 0xd6000000/19
(II) Addressable bus resource ranges are
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
    [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[b](B)
    [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
    [0] -1    0    0xd5000000 - 0xd50000ff (0x100) MX[b]
    [1] -1    0    0xd6000000 - 0xd607ffff (0x80000) MX[b](B)
    [2] -1    0    0xd0000000 - 0xd3ffffff (0x4000000) MX[b](B)
    [3] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b]
    [4] -1    0    0x0000dc00 - 0x0000dc3f (0x40) IX[b]
    [5] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [6] -1    0    0x00005000 - 0x0000500f (0x10) IX[b]
    [7] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[b]
    [8] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[b]
(II) Active PCI resource ranges after removing overlaps:
    [0] -1    0    0xd5000000 - 0xd50000ff (0x100) MX[b]
    [1] -1    0    0xd6000000 - 0xd607ffff (0x80000) MX[b](B)
    [2] -1    0    0xd0000000 - 0xd3ffffff (0x4000000) MX[b](B)
    [3] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b]
    [4] -1    0    0x0000dc00 - 0x0000dc3f (0x40) IX[b]
    [5] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [6] -1    0    0x00005000 - 0x0000500f (0x10) IX[b]
    [7] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[b]
    [8] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[b](B)
    [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
    [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[b](B)
    [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [5] -1    0    0xd5000000 - 0xd50000ff (0x100) MX[b]
    [6] -1    0    0xd6000000 - 0xd607ffff (0x80000) MX[b](B)
    [7] -1    0    0xd0000000 - 0xd3ffffff (0x4000000) MX[b](B)
    [8] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [9] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    [10] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b]
    [11] -1    0    0x0000dc00 - 0x0000dc3f (0x40) IX[b]
    [12] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [13] -1    0    0x00005000 - 0x0000500f (0x10) IX[b]
    [14] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[b]
    [15] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[b]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 0.0.1
    ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 6.8.2, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "/usr/X11R6/lib/modules/extensions/libglx.a" (glx)
(WW) LoadModule: given non-canonical module name "/usr/X11R6/lib/modules/extensions/libglx.a"
(II) Reloading /usr/X11R6/lib/modules/extensions/libglx.a
(II) UnloadModule: "glx"
(EE) Failed to load module "/usr/X11R6/lib/modules/extensions/libglx.a" (once-only module, 136033795)
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.3.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "keyboard"
(II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.o
(II) Module keyboard: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
    i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G
(II) Primary Device is: PCI 00:01:0
(--) Assigning device section with no busID to primary device
(--) Chipset i810 found
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[b](B)
    [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [5] -1    0    0xd5000000 - 0xd50000ff (0x100) MX[b]
    [6] -1    0    0xd6000000 - 0xd607ffff (0x80000) MX[b](B)
    [7] -1    0    0xd0000000 - 0xd3ffffff (0x4000000) MX[b](B)
    [8] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [9] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    [10] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b]
    [11] -1    0    0x0000dc00 - 0x0000dc3f (0x40) IX[b]
    [12] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [13] -1    0    0x00005000 - 0x0000500f (0x10) IX[b]
    [14] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[b]
    [15] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[b]
(II) resource ranges after probing:
    [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[b](B)
    [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [5] -1    0    0xd5000000 - 0xd50000ff (0x100) MX[b]
    [6] -1    0    0xd6000000 - 0xd607ffff (0x80000) MX[b](B)
    [7] -1    0    0xd0000000 - 0xd3ffffff (0x4000000) MX[b](B)
    [8] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [9] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [10] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [11] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [12] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    [13] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b]
    [14] -1    0    0x0000dc00 - 0x0000dc3f (0x40) IX[b]
    [15] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [16] -1    0    0x00005000 - 0x0000500f (0x10) IX[b]
    [17] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[b]
    [18] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[b]
    [19] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [20] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 0.1.0
    ABI class: X.Org Video Driver, version 0.7
(**) I810(0): Depth 16, (--) framebuffer bpp 16
(==) I810(0): RGB weight 565
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.2.0
    ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.1.0
    ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 0.7
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel(R) 8xx Chipset Video BIOS
(II) I810(0): VESA VBE OEM Software Rev: 4.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(R) 8xx Chipset
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 0.7
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: TCI  Model: 707  Serial#: 48943
(II) I810(0): Year: 1996  Week: 42
(II) I810(0): EDID Version: 1.0
(II) I810(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) I810(0): Sync:  Separate
(II) I810(0): Max H-Image Size [cm]: horiz.: 26  vert.: 20
(II) I810(0): Gamma: 2.25
(II) I810(0): DPMS capabilities: Suspend Off; RGB/Color Display
(II) I810(0): redX: 0.625 redY: 0.340   greenX: 0.310 greenY: 0.592
(II) I810(0): blueX: 0.150 blueY: 0.063   whiteX: 0.281 whiteY: 0.311
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400@70Hz
(II) I810(0): 720x400@88Hz
(II) I810(0): 640x480@60Hz
(II) I810(0): 640x480@67Hz
(II) I810(0): 640x480@72Hz
(II) I810(0): 640x480@75Hz
(II) I810(0): 800x600@56Hz
(II) I810(0): 800x600@60Hz
(II) I810(0): 800x600@72Hz
(II) I810(0): 800x600@75Hz
(II) I810(0): 832x624@75Hz
(II) I810(0): 1024x768@87Hz (interlaced)
(II) I810(0): 1024x768@60Hz
(II) I810(0): 1024x768@70Hz
(II) I810(0): 1024x768@75Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(--) I810(0): Chipset: "i810"
(--) I810(0): Linear framebuffer at 0xD0000000
(--) I810(0): IO registers at addr 0xD6000000
(II) I810(0): I810CheckAvailableMemory: 95228k available
(**) I810(0): Will alloc AGP framebuffer: 16384 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(WW) I810(0): config file hsync range 31.5-57kHz not within DDC hsync ranges.
(WW) I810(0): config file vrefresh range 50-70Hz not within DDC vrefresh ranges.
(II) I810(0): monitor1: Using hsync range of 31.50-57.00 kHz
(II) I810(0): monitor1: Using vrefresh range of 50.00-70.00 Hz
(II) I810(0): Clock range:   9.50 to 163.00 MHz
(II) I810(0): Not using default mode "640x350" (vrefresh out of range)
(II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x400" (vrefresh out of range)
(II) I810(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "720x400" (vrefresh out of range)
(II) I810(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (vrefresh out of range)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (vrefresh out of range)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (vrefresh out of range)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (vrefresh out of range)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (vrefresh out of range)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (vrefresh out of range)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1152x864" (width too large for virtual size)
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (width too large for virtual size)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (width too large for virtual size)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "832x624" (vrefresh out of range)
(II) I810(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1152x768" (width too large for virtual size)
(II) I810(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1024" (width too large for virtual size)
(II) I810(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(**) I810(0): Virtual size is 1024x768 (pitch 1024)
(**) I810(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) I810(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) I810(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) I810(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) I810(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) I810(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) I810(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) I810(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) I810(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) I810(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(--) I810(0): Display dimensions: (260, 200) mm
(--) I810(0): DPI set to (100, 97)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 0.1.0
    ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.2
(**) I810(0): page flipping disabled
(II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] 0    0    0xd6000000 - 0xd607ffff (0x80000) MS[b]
    [1] 0    0    0xd0000000 - 0xd3ffffff (0x4000000) MS[b]
    [2] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[b](B)
    [3] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [4] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [5] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [6] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [7] -1    0    0xd5000000 - 0xd50000ff (0x100) MX[b]
    [8] -1    0    0xd6000000 - 0xd607ffff (0x80000) MX[b](B)
    [9] -1    0    0xd0000000 - 0xd3ffffff (0x4000000) MX[b](B)
    [10] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [11] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [12] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [13] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [14] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    [15] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b]
    [16] -1    0    0x0000dc00 - 0x0000dc3f (0x40) IX[b]
    [17] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [18] -1    0    0x00005000 - 0x0000500f (0x10) IX[b]
    [19] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[b]
    [20] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[b]
    [21] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [22] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
(II) I810(0): [drm] loaded kernel module for "i810" driver
(II) I810(0): [drm] DRM interface version 1.2
(II) I810(0): [drm] created "i810" driver at busid "pci:0000:00:01.0"
(II) I810(0): [drm] added 8192 byte SAREA at 0xc88f1000
(II) I810(0): [drm] mapped SAREA 0xc88f1000 to 0xb7d8a000
(II) I810(0): [drm] framebuffer handle = 0xd0000000
(II) I810(0): [drm] added 1 reserved context for kernel
(II) I810(0): [drm] Registers = 0xd6000000
(II) I810(0): [agp] dcacheHandle : 0x0
(II) I810(0): [agp] GART: no dcache memory found
(II) I810(0): [agp] Bound backbuffer memory
(II) I810(0): [agp] Bound depthbuffer memory
(II) I810(0): [agp] Bound System Texture Memory
(II) I810(0): [agp] GART: Allocated 4K for mouse cursor image
(II) I810(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) I810(0): Adding 768 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): [dri] Buffer map : bfb000
(II) I810(0): [drm] added 256 4096 byte DMA buffers
(II) I810(0): [drm] Init v1.4 interface.
(II) I810(0): [drm] dma control initialized, using IRQ -1007
(II) I810(0): [dri] visual configs initialized.
(==) I810(0): Write-combining range (0xd0000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 75.0 MHz [ 0x17 0x6 0x20 ] [ 25 8 2 ]
(II) I810(0): chose watermark 0x2210e000: (tab.freq 75.0)
(**) I810(0): Option "XaaNoPixmapCache"
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Horizontal and Vertical Lines
    Offscreen Pixmaps
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(**) Option "dpms"
(**) I810(0): DPMS enabled
(II) I810(0): X context handle = 0x00000001
(II) I810(0): [drm] installed DRM signal handler
(II) I810(0): [DRI] installation complete
(==) I810(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Keyboard1: XkbLayout: "fr"
(**) Option "XkbOptions" "compose:rwin"
(**) Keyboard1: XkbOptions: "compose:rwin"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "6 7"
(**) Mouse1: ZAxisMapping: buttons 6 and 7
(**) Mouse1: Buttons: 7
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) Mouse1: ps2EnableDataReporting: succeeded
SetClientVersion: 0 8
(II) I810(0): [drm] removed 1 reserved context for kernel
(II) I810(0): [drm] unmapping 8192 bytes of SAREA 0xc88f1000 at 0xb7d8a000
(II) Open APM successful
(II) APM registered successfully
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
(II) I810(0): [drm] DRM interface version 1.2
(II) I810(0): [drm] created "i810" driver at busid "pci:0000:00:01.0"
(II) I810(0): [drm] added 8192 byte SAREA at 0xc88f1000
(II) I810(0): [drm] mapped SAREA 0xc88f1000 to 0xb7d8a000
(II) I810(0): [drm] framebuffer handle = 0xd0000000
(II) I810(0): [drm] added 1 reserved context for kernel
(II) I810(0): [drm] Registers = 0xd6000000
(II) I810(0): [agp] dcacheHandle : 0x0
(II) I810(0): [agp] GART: no dcache memory found
(II) I810(0): [agp] Bound backbuffer memory
(II) I810(0): [agp] Bound depthbuffer memory
(II) I810(0): [agp] Bound System Texture Memory
(II) I810(0): [agp] GART: Allocated 4K for mouse cursor image
(II) I810(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) I810(0): Adding 768 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): [dri] Buffer map : bfb000
(II) I810(0): [drm] added 256 4096 byte DMA buffers
(II) I810(0): [drm] Init v1.4 interface.
(II) I810(0): [drm] dma control initialized, using IRQ -1007
(II) I810(0): [dri] visual configs initialized.
(==) I810(0): Write-combining range (0xd0000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 75.0 MHz [ 0x17 0x6 0x20 ] [ 25 8 2 ]
(II) I810(0): chose watermark 0x2210e000: (tab.freq 75.0)
(**) I810(0): DPMS enabled
(II) I810(0): X context handle = 0x00000001
(II) I810(0): [drm] installed DRM signal handler
(II) I810(0): [DRI] installation complete
(==) I810(0): Direct rendering enabled
(==) RandR enabled
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) I810(0): [drm] removed 1 reserved context for kernel
(II) I810(0): [drm] unmapping 8192 bytes of SAREA 0xc88f1000 at 0xb7d8a000

Hors ligne

#14 Le 30/08/2005, à 14:55

Nanal

Re : fréquence écran

(EE) Failed to load module "/usr/X11R6/lib/modules/extensions/libglx.a" (once-only module, 136033795)

elle est là ton erreur tongue (je me suis trompé dans la commande que je t'ai donné tout à l'heure c'était grep EE et non pas cat EE, ce qui aurait pu éviter un si long texte, enfin bref ...)

As tu installé des drivers propriétaires ?
As tu touché à la ligne des drivers de la carte graphique ?

Avatar : "the mirror of the sun" by bernie (deviantart.com)

Hors ligne

#15 Le 30/08/2005, à 15:00

visor

Re : fréquence écran

non j'ai juste modifié les fréquences comme me l'as dit Stemp

Hors ligne

#16 Le 30/08/2005, à 15:03

Nanal

Re : fréquence écran

Et si tu remets tes paramétres d'origine ça marche ? (ça serait bizzare et donc le problème serait finalement simplement la sécurité de l'écran sur les fréquences mais ça m'étonnerait)

Avatar : "the mirror of the sun" by bernie (deviantart.com)

Hors ligne

#17 Le 30/08/2005, à 16:27

visor

Re : fréquence écran

ba j'ai effacr le xorg.conf et j'ai copier le xorg.conf.old en xorf.conf et j'ai de nouveau l'interface graphique big_smile
mais je suis toujours en 60.1Hz:/

Hors ligne

#18 Le 12/11/2005, à 10:22

twuix

Re : fréquence écran

Moi c'est pareil impossible de passer mon bureau en 75 hertz c'est un ecran lcd 19 mva
m'enfin c'est du gachis ...
j'ai essayais les mêmes methode impossible je vais reessayer...
je signale avant avec la hoary no problem !
y'a t'il une ligne de comande pour changer la fréquence sans passer par le GUI ?

Merci smile

Pages : 1