Pages : 1
#1 Le 19/02/2007, à 01:48
- lepirlouit
[résolu]formatage partition raid
le formatage est assé lent et finit par bloquer
se produit avec l'instal de windows et l'install de linux.
raid nvidia
j'ai téléchargé la dernière version de dmraid
et il à trouvé mon "array"
j'ai su creer les partitions avec fdisk
mais impossible de formater
j'ai commencé par un mkfs et voici ce qui se retrouve dans dmesg :
[ 298.779591] NTFS driver 2.1.27 [Flags: R/O MODULE].
[ 298.833297] JFS: nTxBlock = 8021, nTxLock = 64171
[ 298.885925] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 298.886467] SGI XFS Quota Management subsystem
[ 348.322330] printk: 57 messages suppressed.
[ 348.322335] Buffer I/O error on device sda4, logical block 1347965824
[ 348.322341] Buffer I/O error on device sda4, logical block 1347965825
[ 348.322345] Buffer I/O error on device sda4, logical block 1347965826
[ 348.322349] Buffer I/O error on device sda4, logical block 1347965827
[ 348.322352] Buffer I/O error on device sda4, logical block 1347965828
[ 348.322356] Buffer I/O error on device sda4, logical block 1347965829
[ 348.322359] Buffer I/O error on device sda4, logical block 1347965830
[ 348.322363] Buffer I/O error on device sda4, logical block 1347965831
[ 348.483851] Buffer I/O error on device sda4, logical block 1347965824
[ 348.483859] Buffer I/O error on device sda4, logical block 1347965825
[ 349.476741] Unable to find swap-space signature
[ 349.585915] Unable to find swap-space signature
[ 369.322160] Unable to find swap-space signature
[ 369.509242] Unable to find swap-space signature
[ 369.613558] Unable to find swap-space signature
[ 372.104032] kjournald starting. Commit interval 5 seconds
[ 372.103712] EXT3 FS on dm-3, internal journal
[ 372.103719] EXT3-fs: mounted filesystem with ordered data mode.
[ 373.263250] ata3: translated ATA stat/err 0x51/01 to SCSI SK/ASC/ASCQ 0x3/13/00
[ 373.263255] ata3: status=0x51 { DriveReady SeekComplete Error }
[ 373.263259] ata3: error=0x01 { AddrMarkNotFound }
[ 374.195669] ata3: translated ATA stat/err 0x51/01 to SCSI SK/ASC/ASCQ 0x3/13/00
[ 374.195674] ata3: status=0x51 { DriveReady SeekComplete Error }
[ 374.195677] ata3: error=0x01 { AddrMarkNotFound }
[ 375.169529] ata3: translated ATA stat/err 0x51/01 to SCSI SK/ASC/ASCQ 0x3/13/00
[ 375.169534] ata3: status=0x51 { DriveReady SeekComplete Error }
[ 375.169537] ata3: error=0x01 { AddrMarkNotFound }
[ 376.466632] ata3: translated ATA stat/err 0x51/01 to SCSI SK/ASC/ASCQ 0x3/13/00
[ 376.466637] ata3: status=0x51 { DriveReady SeekComplete Error }
[ 376.466640] ata3: error=0x01 { AddrMarkNotFound }
[ 377.486078] ata3: translated ATA stat/err 0x51/01 to SCSI SK/ASC/ASCQ 0x3/13/00
[ 377.486083] ata3: status=0x51 { DriveReady SeekComplete Error }
[ 377.486086] ata3: error=0x01 { AddrMarkNotFound }
[ 378.484806] ata3: translated ATA stat/err 0x51/01 to SCSI SK/ASC/ASCQ 0x3/13/00
[ 378.484811] ata3: status=0x51 { DriveReady SeekComplete Error }
[ 378.484814] ata3: error=0x01 { AddrMarkNotFound }
[ 378.484827] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 378.484829] sdc: Current: sense key: Medium Error
[ 378.484831] Additional sense: Address mark not found for data field
[ 378.484836] Info fld=0x13dff90
[ 378.484839] end_request: I/O error, dev sdc, sector 20840336
[ 378.484887] EXT3-fs error (device dm-3): ext3_find_entry: reading directory #2 offset 0
[ 378.484892] Aborting journal on device dm-3.
[ 379.537406] ata3: translated ATA stat/err 0x51/01 to SCSI SK/ASC/ASCQ 0x3/13/00
[ 379.537411] ata3: status=0x51 { DriveReady SeekComplete Error }
[ 379.537415] ata3: error=0x01 { AddrMarkNotFound }
[ 380.747480] ata3: translated ATA stat/err 0x51/01 to SCSI SK/ASC/ASCQ 0x3/13/00
[ 380.747485] ata3: status=0x51 { DriveReady SeekComplete Error }
[ 380.747489] ata3: error=0x01 { AddrMarkNotFound }
[ 384.390139] ata3: translated ATA stat/err 0x51/01 to SCSI SK/ASC/ASCQ 0x3/13/00
[ 384.390144] ata3: status=0x51 { DriveReady SeekComplete Error }
[ 384.390147] ata3: error=0x01 { AddrMarkNotFound }
[ 386.698401] ata3: translated ATA stat/err 0x51/01 to SCSI SK/ASC/ASCQ 0x3/13/00
[ 386.698406] ata3: status=0x51 { DriveReady SeekComplete Error }
[ 386.698409] ata3: error=0x01 { AddrMarkNotFound }
[ 387.958205] ata3: translated ATA stat/err 0x51/01 to SCSI SK/ASC/ASCQ 0x3/13/00
[ 387.958210] ata3: status=0x51 { DriveReady SeekComplete Error }
[ 387.958213] ata3: error=0x01 { AddrMarkNotFound }
[ 388.973509] ata3: translated ATA stat/err 0x51/01 to SCSI SK/ASC/ASCQ 0x3/13/00
[ 388.973514] ata3: status=0x51 { DriveReady SeekComplete Error }
[ 388.973517] ata3: error=0x01 { AddrMarkNotFound }
[ 388.973527] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 388.973530] sdc: Current: sense key: Medium Error
[ 388.973532] Additional sense: Address mark not found for data field
[ 388.973537] Info fld=0x13dff90
[ 388.973540] end_request: I/O error, dev sdc, sector 20840336
[ 388.974052] EXT3-fs error (device dm-3): ext3_find_entry: reading directory #2 offset 0
[ 388.974801] ext3_abort called.
[ 388.974806] EXT3-fs error (device dm-3): ext3_journal_start_sb: Detected aborted journal
[ 388.974810] Remounting filesystem read-only
[ 673.688666] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 673.688675] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 673.688678] ata3: status=0xd0 { Busy }
[ 673.688727] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 673.688730] sdc: Current: sense key: Aborted Command
[ 673.688732] Additional sense: Scsi parity error
[ 673.688738] end_request: I/O error, dev sdc, sector 1823527
[ 673.688744] printk: 62 messages suppressed.
[ 673.688747] Buffer I/O error on device dm-1, logical block 683837
[ 673.688750] lost page write due to I/O error on dm-1
[ 688.677581] ata3: command 0x35 timeout, stat 0x50 host_stat 0x21
[ 688.677589] ata3: status=0x50 { DriveReady SeekComplete }
[ 688.677595] sdc: Current: sense key: No Sense
[ 688.677598] Additional sense: No additional sense information
[ 703.666486] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 703.666495] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 703.666498] ata3: status=0xd0 { Busy }
[ 703.666554] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 703.666556] sdc: Current: sense key: Aborted Command
[ 703.666559] Additional sense: Scsi parity error
[ 703.666564] end_request: I/O error, dev sdc, sector 1824495
[ 703.666571] Buffer I/O error on device dm-1, logical block 684182
[ 703.666573] lost page write due to I/O error on dm-1
[ 718.655377] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 718.655385] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 718.655388] ata3: status=0xd0 { Busy }
[ 718.655443] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 718.655445] sdc: Current: sense key: Aborted Command
[ 718.655448] Additional sense: Scsi parity error
[ 718.655454] end_request: I/O error, dev sdc, sector 1824503
[ 718.655461] Buffer I/O error on device dm-1, logical block 684183
[ 718.655464] lost page write due to I/O error on dm-1
[ 733.646290] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 733.646299] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 733.646302] ata3: status=0xd0 { Busy }
[ 733.646355] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 733.646357] sdc: Current: sense key: Aborted Command
[ 733.646360] Additional sense: Scsi parity error
[ 733.646366] end_request: I/O error, dev sdc, sector 1824511
[ 733.646373] Buffer I/O error on device dm-1, logical block 684184
[ 733.646375] lost page write due to I/O error on dm-1
[ 748.635193] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 748.635203] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 748.635206] ata3: status=0xd0 { Busy }
[ 748.635259] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 748.635262] sdc: Current: sense key: Aborted Command
[ 748.635264] Additional sense: Scsi parity error
[ 748.635270] end_request: I/O error, dev sdc, sector 1824512
[ 748.635277] Buffer I/O error on device dm-1, logical block 684216
[ 748.635279] lost page write due to I/O error on dm-1
[ 763.624090] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 763.624100] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 763.624103] ata3: status=0xd0 { Busy }
[ 763.624157] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 763.624160] sdc: Current: sense key: Aborted Command
[ 763.624162] Additional sense: Scsi parity error
[ 763.624169] end_request: I/O error, dev sdc, sector 1824519
[ 763.624176] Buffer I/O error on device dm-1, logical block 684217
[ 763.624178] lost page write due to I/O error on dm-1
[ 778.612995] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 778.613004] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 778.613007] ata3: status=0xd0 { Busy }
[ 778.613058] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 778.613060] sdc: Current: sense key: Aborted Command
[ 778.613063] Additional sense: Scsi parity error
[ 778.613069] end_request: I/O error, dev sdc, sector 1824527
[ 778.613076] Buffer I/O error on device dm-1, logical block 684218
[ 778.613078] lost page write due to I/O error on dm-1
[ 793.601883] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 793.601892] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 793.601895] ata3: status=0xd0 { Busy }
[ 793.601948] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 793.601951] sdc: Current: sense key: Aborted Command
[ 793.601954] Additional sense: Scsi parity error
[ 793.601960] end_request: I/O error, dev sdc, sector 1824535
[ 793.601966] Buffer I/O error on device dm-1, logical block 684219
[ 793.601969] lost page write due to I/O error on dm-1
[ 808.590754] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 808.590763] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 808.590766] ata3: status=0xd0 { Busy }
[ 808.590818] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 808.590821] sdc: Current: sense key: Aborted Command
[ 808.590823] Additional sense: Scsi parity error
[ 808.590829] end_request: I/O error, dev sdc, sector 1824543
[ 808.590836] Buffer I/O error on device dm-1, logical block 684220
[ 808.590838] lost page write due to I/O error on dm-1
[ 823.581633] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 823.581643] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 823.581646] ata3: status=0xd0 { Busy }
[ 823.581700] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 823.581703] sdc: Current: sense key: Aborted Command
[ 823.581705] Additional sense: Scsi parity error
[ 823.581711] end_request: I/O error, dev sdc, sector 1824551
[ 823.581719] Buffer I/O error on device dm-1, logical block 684221
[ 823.581721] lost page write due to I/O error on dm-1
[ 838.570506] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 838.570516] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 838.570519] ata3: status=0xd0 { Busy }
[ 838.570570] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 838.570573] sdc: Current: sense key: Aborted Command
[ 838.570575] Additional sense: Scsi parity error
[ 838.570581] end_request: I/O error, dev sdc, sector 1824559
[ 838.570588] Buffer I/O error on device dm-1, logical block 684222
[ 838.570591] lost page write due to I/O error on dm-1
[ 853.559367] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 853.559377] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 853.559379] ata3: status=0xd0 { Busy }
[ 853.559432] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 853.559434] sdc: Current: sense key: Aborted Command
[ 853.559437] Additional sense: Scsi parity error
[ 853.559442] end_request: I/O error, dev sdc, sector 1824567
[ 853.559449] Buffer I/O error on device dm-1, logical block 684223
[ 853.559452] lost page write due to I/O error on dm-1
[ 868.548237] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 868.548247] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 868.548250] ata3: status=0xd0 { Busy }
[ 868.548300] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 868.548302] sdc: Current: sense key: Aborted Command
[ 868.548306] Additional sense: Scsi parity error
[ 868.548314] end_request: I/O error, dev sdc, sector 1824575
[ 868.548321] Buffer I/O error on device dm-1, logical block 684224
[ 868.548324] lost page write due to I/O error on dm-1
[ 883.537147] ata3: command 0x35 timeout, stat 0xd0 host_stat 0x21
[ 883.537157] ata3: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 883.537160] ata3: status=0xd0 { Busy }
[ 883.537210] sd 2:0:0:0: SCSI error: return code = 0x8000002
[ 883.537213] sdc: Current: sense key: Aborted Command
[ 883.537217] Additional sense: Scsi parity error
[ 883.537225] end_request: I/O error, dev sdc, sector 1824583
[ 883.537233] Buffer I/O error on device dm-1, logical block 684225
[ 883.537235] lost page write due to I/O error on dm-1je n'y cromprend rien, merci de m'aider.
Dernière modification par lepirlouit (Le 01/03/2007, à 20:47)
Hors ligne
#2 Le 19/02/2007, à 12:15
- Hoper
Re : [résolu]formatage partition raid
Bein... I/O erreur c'est des erreurs disques ca...
Avant de vouloir faire du raid (surtout du pseudo hardware, c'est caca.. autant faire du vrai software a ce niveau la... m'enfin) tu devrai vérifier l'etat de tes diques pris separement. Donc, faire une partition unique sur le premier, et utiliser badblocks pour vérifier que le disque est ok. Puis pareil sur le deuxieme. Si tout marche bien sans le raid, c'est peut etre le driver de ce raid "pseudo hard" qui à un soucis....
Bref, test disque par disque déjà.
Mes tutos et coups de gueule :
http://hoper.dnsalias.net/atdc/
Mastodon: @hoper@framapiaf.org
Hors ligne
#3 Le 19/02/2007, à 16:21
- lepirlouit
Re : [résolu]formatage partition raid
ce matin j'ai eu un joli SMART erro de la part du bios.
en effet, il y a bien un des disques qui foire.
pourtant des disques neufs.
à retenir :
ne jmais faire confiance à du matériel neuf.
Hors ligne
#4 Le 19/02/2007, à 16:30
- Hoper
Re : [résolu]formatage partition raid
Pour les disques dur, il me semble que les probabilités de tomber en panne c'est justement surtout au début, puis apres trois ans... en gros si tu passe les deux/trois premiers mois, c'est bon. Avant...
Mes tutos et coups de gueule :
http://hoper.dnsalias.net/atdc/
Mastodon: @hoper@framapiaf.org
Hors ligne
#5 Le 01/03/2007, à 18:20
- ponsfrilus
Re : [résolu]formatage partition raid
On a fait un tuto pour installer du RAID 0 avec dmraid sur Edgy...
C'est par là: http://blog.donax.ch/index.php/post/200 … buntu-Edgy
Peut-être que ca t'aidera...
++
ponsfrilus #4886 #424255 - http://blog.donax.ch - Mon del.icio.us - Ubuntu sur FlickR
Hors ligne
Pages : 1