Pages : 1
#1 Le 27/02/2007, à 20:37
- mathojojo
wacom VOLITO2
Bonjour,
Je possède la tablette volito2, et je suis sous Dapper. Mon problème, c'est que la surface de ma tablette ne correspond pas toujours à la surface de l'écran. Je crois que c'est ce qu'on appelle le mode absolu.
C'est un peu embettant, car je suis obligé de brasser de gauche à droite, ou de haut en bas plusieurs fois afin de pouvoir atteindre une zone extreme (le bas, le haut, la droite ou la gauche).
Je pense pourtant avoir configuré mon Xorg correctement, le voici :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Mode" "absolute"
Option "KeepShape" "on"
Option "Type" "stylus"
Option "USB" "on"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. R430 UM [Radeon X800 XL] (PCIe)"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "HM903D/DT"
Option "DPMS"
HorizSync 30-107
VertRefresh 50-85
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. R430 UM [Radeon X800 XL] (PCIe)"
Monitor "HM903D/DT"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Si vous voyez le problème... merci de m'aider ! Moi je sèche.
Merci encore, @+
AMD Phenom II X6 1090T RAM DDR3 8Go - ATI HD4850
Kubuntu/Raring Ringtail KDE 4.10
Hors ligne
#2 Le 04/03/2007, à 18:43
- grillon
Re : wacom VOLITO2
salut
Option "Mode" "Absolute"
absolute avec A majuscule, ce serait bête mais c'est peut être çà!
sinon ce que je trouve bizarre c'est que mon lien wacom pointe vers /dev/input/wacom et non /dev/wacom (wacom-tools installé).
Grillon
Dernière modification par grillon (Le 04/03/2007, à 18:44)
Hors ligne
Pages : 1