Pages : 1
#1 Le 21/01/2012, à 10:16
- Pierrot86
Démarrage aléatoire de Lubuntu 11.10
Bonjour à tous,
Voilà j'ai installé Lubuntu 11.10 sur un ordinateur portable assez ancien (HP Pavilion zv5000). Mon problème est qu'au démarrage, grub s'affiche sans problème, mais lorsque je lance Lubuntu, celui démarre, ou non, et ceci à première de façon totalement aléatoire.
Quand l'entrée Ubuntu est sélectionnée, le disque dur commence à travailler. Lors d'un démarrage normal, je vois ensuite l'écran changé de couleur, et passer à l'écran de login. Sinon, le disque dur semble s'arrêter, et l'écran reste désespérément noir. Je n'ai pas plus qu'à éteindre l'ordinateur par le bouton power, et retenter ma chance. Si le démarrage précédent a échoué, j'ai un underscore clignotant au lieu d'un écran totalement noir, mais le démarrage est tout aussi aléatoire.
Au démarrage, j'ai essayé également de supprimer les options quiet et splash. Lorsque le boot réussi, j'ai une série de textes, qui se terminent par "init-bottom : done" (ou quelque chose comme ça), un changement de résolution rapide de l'écran, puis l'écran qui s'éclaire pour ensuite passer sur l'écran de login. Si le boot échoue, je reste sur "init-bottom : done", avec "Please loading en haut". Mais parfois, ces infos ne s'affichent pas du tout (bien que j'ai supprimé quiet et splash).
Pour résoudre ce problème, j'ai tenté d'ajouter différentes options au boot : acpi=off, noapic, nolapic, nomodeset, acpi_osi=Linux (un peu au hasard je dois dire). Le résultat est resté inchangé. Le démarrage en mode recovery est également aléatoire. J'ai également essayé un autre disque dur où Lubuntu 11.04 était installé : le démarrage est également aléatoire. Memtest ne renvoi aucune erreur.
Sinon, lorsque le système a correctement démarré, il ne semble y avoir aucun souci particulier (excepté un problème de wifi, à propos duquel j'ai posté ici http://forum.ubuntu-fr.org/viewtopic.php?id=786211, mais qui ne semble pas lié).
Cet ordinateur portable (qui ne m'appartient pas), faisait tourner Windows XP sans problème, ainsi que d'anciennes versions de Ubuntu (je ne sais pas lesquelles).
Voilà si quelqu'un a une idée, je lui en serait reconnaissant.
Merci.
Hors ligne
#2 Le 21/01/2012, à 20:39
- mikedafunk
Re : Démarrage aléatoire de Lubuntu 11.10
Salut 
Essaie une ancienne version de lubuntu (ex:10.04) en attendant la 12.04
a+
Lubuntu 22.04 sur Lenovo AX81 et pas mal d'Amiga
Mon blog : http://mikedafunk.over-blog.org
Hors ligne
#3 Le 22/01/2012, à 20:57
- Pierrot86
Re : Démarrage aléatoire de Lubuntu 11.10
Merci, en effet, je vais essayer avec la dernière LTS. Mais j'aimerai tout de même savoir si ce problème était déjà arrivé à quelqu'un. C'est très frustrant, sachant qu'une fois lancé, le système tourne très bien.
Hors ligne
#4 Le 25/01/2012, à 19:55
- Pierrot86
Re : Démarrage aléatoire de Lubuntu 11.10
Personne n'a une idée ?
Hors ligne
#5 Le 25/01/2012, à 21:06
- mikedafunk
Re : Démarrage aléatoire de Lubuntu 11.10
J'ai toujours eu des problèmes de démarrage aléatoires avec ubuntu
1 fois sur 8 mon netbook ne démarre pas jusqu'au bout 
Lubuntu 22.04 sur Lenovo AX81 et pas mal d'Amiga
Mon blog : http://mikedafunk.over-blog.org
Hors ligne
#6 Le 25/01/2012, à 21:19
- Pierrot86
Re : Démarrage aléatoire de Lubuntu 11.10
Je ne sais pas si ça peut aider, mais voici le contenu de mon fichier /var/log/dmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-15-generic (buildd@zirconium) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #26-Ubuntu SMP Fri Jan 20 15:59:53 UTC 2012 (Ubuntu 3.0.0-15.26-generic 3.0.13)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000ff70000 (usable)
[ 0.000000] BIOS-e820: 000000000ff70000 - 000000000ff7f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000ff7f000 - 000000000ff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI present.
[ 0.000000] DMI: Hewlett-Packard Pavilion zv5200 (PN610EA#ABF) /08A0, BIOS F.35 04/28/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xff70 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-D3FFF write-back
[ 0.000000] D4000-D4FFF write-protect
[ 0.000000] D5000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFF0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000000ff70000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000fc00000 page 2M
[ 0.000000] 000fc00000 - 000ff70000 page 4k
[ 0.000000] kernel direct mapping tables up to ff70000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 0e493000 - 0f195000
[ 0.000000] ACPI: RSDP 000f7240 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0ff7a89f 00034 (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0ff7ee34 00074 (v01 NVIDIA CK8 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 0ff7a8d3 04561 (v01 NVIDIA CK8 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0ff7ffc0 00040
[ 0.000000] ACPI: APIC 0ff7eea8 0005A (v01 NVIDIA NV_APIC_ 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0ff7ef02 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 0ff7ef2a 000D6 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0ff70000
[ 0.000000] low ram: 0 - 0ff70000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000ff70
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000ff70
[ 0.000000] On node 0 totalpages: 65279
[ 0.000000] free_area_init_node: node 0, pgdat c17b5400, node_mem_map cfd6f200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 479 pages used for memmap
[ 0.000000] Normal zone: 60817 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @cf800000 s26240 r0 d22912 u4194304
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-15-generic root=UUID=45199d0a-96f3-4140-8936-afcb92e07a8b ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1046016 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 234896k/261568k available (5336k kernel code, 26220k reserved, 2599k data, 696k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd0770000 - 0xff7fe000 ( 752 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcff70000 ( 255 MB)
[ 0.000000] .init : 0xc17c1000 - 0xc186f000 ( 696 kB)
[ 0.000000] .data : 0xc1536144 - 0xc17c0080 (2599 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1536144 (5336 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=cf408000 soft=cf40a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1595.858 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.71 BogoMIPS (lpj=6383432)
[ 0.008013] pid_max: default: 32768 minimum: 301
[ 0.008047] Security Framework initialized
[ 0.008080] AppArmor: AppArmor initialized
[ 0.008083] Yama: becoming mindful.
[ 0.008170] Mount-cache hash table entries: 512
[ 0.008362] Initializing cgroup subsys cpuacct
[ 0.008372] Initializing cgroup subsys memory
[ 0.008387] Initializing cgroup subsys devices
[ 0.008391] Initializing cgroup subsys freezer
[ 0.008396] Initializing cgroup subsys net_cls
[ 0.008400] Initializing cgroup subsys blkio
[ 0.008412] Initializing cgroup subsys perf_event
[ 0.008455] mce: CPU supports 5 MCE banks
[ 0.008783] SMP alternatives: switching to UP code
[ 0.020853] Freeing SMP alternatives: 24k freed
[ 0.020881] ACPI: Core revision 20110413
[ 0.028020] ftrace: allocating 24882 entries in 49 pages
[ 0.032116] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032523] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.071866] CPU0: AMD Athlon(tm) XP Processor 2800+ stepping 0a
[ 0.072003] Performance Events: AMD PMU driver.
[ 0.072003] ... version: 0
[ 0.072003] ... bit width: 48
[ 0.072003] ... generic registers: 4
[ 0.072003] ... value mask: 0000ffffffffffff
[ 0.072003] ... max period: 00007fffffffffff
[ 0.072003] ... fixed-purpose events: 0
[ 0.072003] ... event mask: 000000000000000f
[ 0.072003] Brought up 1 CPUs
[ 0.072003] Total of 1 processors activated (3191.71 BogoMIPS).
[ 0.072003] devtmpfs: initialized
[ 0.072003] PM: Registering ACPI NVS region at ff7f000 (4096 bytes)
[ 0.072056] print_constraints: dummy:
[ 0.072085] Time: 20:14:28 Date: 01/25/12
[ 0.072142] NET: Registered protocol family 16
[ 0.072316] EISA bus registered
[ 0.072323] node 0 link 0: io port [1000, fffff]
[ 0.072328] TOM: 0000000010000000 aka 256M
[ 0.072333] node 0 link 0: mmio [a0000, bffff]
[ 0.072338] node 0 link 0: mmio [10000000, fe0bffff]
[ 0.072342] bus: [00, ff] on node 0 link 0
[ 0.072347] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.072350] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.072354] bus: 00 index 2 [mem 0x10000000-0xffffffff]
[ 0.072364] ACPI: bus type pci registered
[ 0.072567] PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=2
[ 0.072570] PCI: Using configuration type 1 for base access
[ 0.074149] bio: create slab <bio-0> at 0
[ 0.075584] ACPI: EC: Look up EC in DSDT
[ 0.078218] ACPI: Interpreter enabled
[ 0.078225] ACPI: (supports S0 S3 S4 S5)
[ 0.078249] ACPI: Using IOAPIC for interrupt routing
[ 0.148928] ACPI: EC: GPE = 0x21, I/O: command/status = 0x66, data = 0x62
[ 0.149112] ACPI: No dock devices found.
[ 0.149115] HEST: Table not found.
[ 0.149121] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.149208] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.149353] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.149358] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.149362] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.149366] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.149370] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xfebfffff] (ignored)
[ 0.149391] pci 0000:00:00.0: [10de:00d1] type 0 class 0x000600
[ 0.149401] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.149456] pci 0000:00:01.0: [10de:00d0] type 0 class 0x000601
[ 0.149495] pci 0000:00:01.1: [10de:00d4] type 0 class 0x000c05
[ 0.149517] pci 0000:00:01.1: reg 20: [io 0x2040-0x207f]
[ 0.149524] pci 0000:00:01.1: reg 24: [io 0x2000-0x203f]
[ 0.149539] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.149543] pci 0000:00:01.1: PME# disabled
[ 0.149564] pci 0000:00:02.0: [10de:00d7] type 0 class 0x000c03
[ 0.149574] pci 0000:00:02.0: reg 10: [mem 0xe8000000-0xe8000fff]
[ 0.149603] pci 0000:00:02.0: supports D1 D2
[ 0.149606] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149611] pci 0000:00:02.0: PME# disabled
[ 0.149623] pci 0000:00:02.1: [10de:00d7] type 0 class 0x000c03
[ 0.149633] pci 0000:00:02.1: reg 10: [mem 0xe8001000-0xe8001fff]
[ 0.149663] pci 0000:00:02.1: supports D1 D2
[ 0.149666] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149670] pci 0000:00:02.1: PME# disabled
[ 0.149683] pci 0000:00:02.2: [10de:00d8] type 0 class 0x000c03
[ 0.149694] pci 0000:00:02.2: reg 10: [mem 0xe8004000-0xe80040ff]
[ 0.149724] pci 0000:00:02.2: supports D1 D2
[ 0.149727] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149732] pci 0000:00:02.2: PME# disabled
[ 0.149751] pci 0000:00:06.0: [10de:00da] type 0 class 0x000401
[ 0.149761] pci 0000:00:06.0: reg 10: [io 0x1400-0x14ff]
[ 0.149768] pci 0000:00:06.0: reg 14: [io 0x1c00-0x1c7f]
[ 0.149774] pci 0000:00:06.0: reg 18: [mem 0xe8002000-0xe8002fff]
[ 0.149798] pci 0000:00:06.0: supports D1 D2
[ 0.149810] pci 0000:00:06.1: [10de:00d9] type 0 class 0x000703
[ 0.149820] pci 0000:00:06.1: reg 10: [io 0x1800-0x18ff]
[ 0.149827] pci 0000:00:06.1: reg 14: [io 0x1c80-0x1cff]
[ 0.149834] pci 0000:00:06.1: reg 18: [mem 0xe8003000-0xe8003fff]
[ 0.149857] pci 0000:00:06.1: PME# supported from D3cold
[ 0.149861] pci 0000:00:06.1: PME# disabled
[ 0.149880] pci 0000:00:08.0: [10de:00d5] type 0 class 0x000101
[ 0.149901] pci 0000:00:08.0: reg 20: [io 0x2080-0x208f]
[ 0.149928] pci 0000:00:0a.0: [10de:00dd] type 1 class 0x000604
[ 0.149951] pci 0000:00:0b.0: [10de:00d2] type 1 class 0x000604
[ 0.149995] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.150017] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.150035] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.150054] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.150075] PCI: peer root bus 00 res updated from pci conf
[ 0.150098] pci 0000:02:01.0: [10ec:8139] type 0 class 0x000200
[ 0.150112] pci 0000:02:01.0: reg 10: [io 0x7000-0x70ff]
[ 0.150121] pci 0000:02:01.0: reg 14: [mem 0xe8104000-0xe81040ff]
[ 0.150163] pci 0000:02:01.0: supports D1 D2
[ 0.150166] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.150171] pci 0000:02:01.0: PME# disabled
[ 0.150185] pci 0000:02:02.0: [14e4:4301] type 0 class 0x000280
[ 0.150196] pci 0000:02:02.0: reg 10: [mem 0xe8100000-0xe8101fff]
[ 0.150245] pci 0000:02:04.0: [104c:ac54] type 2 class 0x000607
[ 0.150260] pci 0000:02:04.0: reg 10: [mem 0xe8102000-0xe8102fff]
[ 0.150276] pci 0000:02:04.0: supports D1 D2
[ 0.150279] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.150284] pci 0000:02:04.0: PME# disabled
[ 0.150300] pci 0000:02:04.1: [104c:ac54] type 2 class 0x000607
[ 0.150315] pci 0000:02:04.1: reg 10: [mem 0xe8103000-0xe8103fff]
[ 0.150331] pci 0000:02:04.1: supports D1 D2
[ 0.150334] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.150339] pci 0000:02:04.1: PME# disabled
[ 0.150356] pci 0000:02:04.2: [104c:8201] type 0 class 0x000880
[ 0.150369] pci 0000:02:04.2: reg 10: [io 0x7400-0x743f]
[ 0.150446] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.150450] pci 0000:00:0a.0: bridge window [io 0x3000-0x7fff]
[ 0.150455] pci 0000:00:0a.0: bridge window [mem 0xe8100000-0xe97fffff]
[ 0.150460] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.150495] pci_bus 0000:03: [bus 03-06] partially hidden behind bridge 0000:02 [bus 02-02]
[ 0.150522] pci_bus 0000:07: [bus 07-0a] partially hidden behind bridge 0000:02 [bus 02-02]
[ 0.150546] pci 0000:01:00.0: [10de:0176] type 0 class 0x000300
[ 0.150564] pci 0000:01:00.0: reg 10: [mem 0xea000000-0xeaffffff]
[ 0.150574] pci 0000:01:00.0: reg 14: [mem 0xf8000000-0xfbffffff pref]
[ 0.150585] pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfc07ffff pref]
[ 0.150614] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.150672] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
[ 0.150677] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.150682] pci 0000:00:0b.0: bridge window [mem 0xea000000-0xeaffffff]
[ 0.150688] pci 0000:00:0b.0: bridge window [mem 0xf8000000-0xfc0fffff pref]
[ 0.150698] pci_bus 0000:00: on NUMA node 0
[ 0.150703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.150802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.150844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
[ 0.150865] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.159636] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0
[ 0.159735] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0
[ 0.159828] ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0
[ 0.159919] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled.
[ 0.160025] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0
[ 0.160114] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0
[ 0.160202] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0
[ 0.160290] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0
[ 0.160383] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0
[ 0.160470] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled.
[ 0.160559] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0
[ 0.160655] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0
[ 0.160748] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled.
[ 0.160843] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled.
[ 0.161007] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.161010] vgaarb: loaded
[ 0.161012] vgaarb: bridge control possible 0000:01:00.0
[ 0.161365] SCSI subsystem initialized
[ 0.161473] libata version 3.00 loaded.
[ 0.161552] usbcore: registered new interface driver usbfs
[ 0.161569] usbcore: registered new interface driver hub
[ 0.161604] usbcore: registered new device driver usb
[ 0.161736] PCI: Using ACPI for IRQ routing
[ 0.161743] PCI: pci_cache_line_size set to 64 bytes
[ 0.161811] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.161815] reserve RAM buffer: 000000000ff70000 - 000000000fffffff
[ 0.161976] NetLabel: Initializing
[ 0.161979] NetLabel: domain hash size = 128
[ 0.161981] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.161998] NetLabel: unlabeled traffic allowed by default
[ 0.172186] AppArmor: AppArmor Filesystem Enabled
[ 0.172234] pnp: PnP ACPI init
[ 0.172258] ACPI: bus type pnp registered
[ 0.172400] pnp 00:00: [bus 00-ff]
[ 0.172404] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.172408] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.172411] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.172415] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.172419] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.172422] pnp 00:00: [mem 0x10000000-0xfebfffff window]
[ 0.172498] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.172815] pnp 00:01: [io 0x8000-0x807f]
[ 0.172819] pnp 00:01: [io 0x8080-0x80ff]
[ 0.172822] pnp 00:01: [io 0x8400-0x847f]
[ 0.172825] pnp 00:01: [io 0x8480-0x84ff]
[ 0.172828] pnp 00:01: [io 0x8800-0x887f]
[ 0.172831] pnp 00:01: [io 0x8880-0x88ff]
[ 0.172838] pnp 00:01: [io 0x2040-0x207f]
[ 0.172841] pnp 00:01: [io 0x2000-0x203f]
[ 0.172924] system 00:01: [io 0x8000-0x807f] has been reserved
[ 0.172928] system 00:01: [io 0x8080-0x80ff] has been reserved
[ 0.172932] system 00:01: [io 0x8400-0x847f] has been reserved
[ 0.172936] system 00:01: [io 0x8480-0x84ff] has been reserved
[ 0.172940] system 00:01: [io 0x8800-0x887f] has been reserved
[ 0.172945] system 00:01: [io 0x8880-0x88ff] has been reserved
[ 0.172949] system 00:01: [io 0x2040-0x207f] has been reserved
[ 0.172953] system 00:01: [io 0x2000-0x203f] has been reserved
[ 0.172958] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.173027] pnp 00:02: [mem 0xfff80000-0xffffffff]
[ 0.173030] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.173034] pnp 00:02: [mem 0xfee00000-0xfeefffff]
[ 0.173037] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[ 0.173095] system 00:02: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.173100] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.173104] system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.173109] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.173113] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.192041] pnp 00:03: [io 0x0010-0x001f]
[ 0.192045] pnp 00:03: [io 0x0022-0x003f]
[ 0.192048] pnp 00:03: [io 0x0044-0x005f]
[ 0.192051] pnp 00:03: [io 0x0062-0x0063]
[ 0.192054] pnp 00:03: [io 0x0065-0x006f]
[ 0.192057] pnp 00:03: [io 0x0072-0x0073]
[ 0.192060] pnp 00:03: [io 0x0074-0x007f]
[ 0.192063] pnp 00:03: [io 0x0091-0x0093]
[ 0.192066] pnp 00:03: [io 0x0097-0x009f]
[ 0.192069] pnp 00:03: [io 0x00a2-0x00bf]
[ 0.192073] pnp 00:03: [io 0x0200-0x020f]
[ 0.192076] pnp 00:03: [io 0x0680-0x06ff]
[ 0.192079] pnp 00:03: [io 0x00e0-0x00ef]
[ 0.192082] pnp 00:03: [io 0x04d0-0x04d1]
[ 0.192085] pnp 00:03: [io 0xfe00-0xfe01]
[ 0.192163] system 00:03: [io 0x0200-0x020f] has been reserved
[ 0.192168] system 00:03: [io 0x0680-0x06ff] has been reserved
[ 0.192172] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.192176] system 00:03: [io 0xfe00-0xfe01] has been reserved
[ 0.192181] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.192202] pnp 00:04: [io 0x0000-0x0008]
[ 0.192205] pnp 00:04: [io 0x000a-0x000f]
[ 0.192208] pnp 00:04: [io 0x0081-0x0083]
[ 0.192211] pnp 00:04: [io 0x0087]
[ 0.192214] pnp 00:04: [io 0x0089-0x008b]
[ 0.192217] pnp 00:04: [io 0x008f]
[ 0.192220] pnp 00:04: [io 0x00c0-0x00d1]
[ 0.192223] pnp 00:04: [io 0x00d4-0x00df]
[ 0.192227] pnp 00:04: [dma 4]
[ 0.192270] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.192282] pnp 00:05: [io 0x0061]
[ 0.192320] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.192334] pnp 00:06: [io 0x0070-0x0071]
[ 0.192351] pnp 00:06: [irq 8]
[ 0.192388] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.192401] pnp 00:07: [io 0x00f0-0x00f1]
[ 0.192409] pnp 00:07: [irq 13]
[ 0.192447] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.192470] pnp 00:08: [io 0x0060]
[ 0.192473] pnp 00:08: [io 0x0064]
[ 0.192481] pnp 00:08: [irq 1]
[ 0.192530] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.192555] pnp 00:09: [irq 12]
[ 0.192602] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.192748] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (disabled)
[ 0.192780] pnp 00:0b: [io 0x0378-0x037f]
[ 0.192780] pnp 00:0b: [io 0x0778-0x077b]
[ 0.192780] pnp 00:0b: [irq 7]
[ 0.192780] pnp 00:0b: [dma 1]
[ 0.192780] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.192780] pnp: PnP ACPI: found 12 devices
[ 0.192780] ACPI: ACPI bus type pnp unregistered
[ 0.192780] PnPBIOS: Disabled by ACPI PNP
[ 0.232020] Switching to clocksource acpi_pm
[ 0.232058] PCI: max bus depth: 2 pci_try_num: 3
[ 0.232091] pci 0000:00:0a.0: BAR 15: assigned [mem 0x10000000-0x17ffffff pref]
[ 0.232098] pci 0000:02:04.0: BAR 15: assigned [mem 0x10000000-0x13ffffff pref]
[ 0.232103] pci 0000:02:04.0: BAR 16: can't assign mem (size 0x4000000)
[ 0.232108] pci 0000:02:04.1: BAR 15: assigned [mem 0x14000000-0x17ffffff pref]
[ 0.232112] pci 0000:02:04.1: BAR 16: can't assign mem (size 0x4000000)
[ 0.232116] pci 0000:02:04.0: BAR 13: assigned [io 0x3000-0x30ff]
[ 0.232120] pci 0000:02:04.0: BAR 14: assigned [io 0x3400-0x34ff]
[ 0.232124] pci 0000:02:04.1: BAR 13: assigned [io 0x3800-0x38ff]
[ 0.232128] pci 0000:02:04.1: BAR 14: assigned [io 0x3c00-0x3cff]
[ 0.232132] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
[ 0.232135] pci 0000:02:04.0: bridge window [io 0x3000-0x30ff]
[ 0.232141] pci 0000:02:04.0: bridge window [io 0x3400-0x34ff]
[ 0.232147] pci 0000:02:04.0: bridge window [mem 0x10000000-0x13ffffff pref]
[ 0.232152] pci 0000:02:04.1: CardBus bridge to [bus 07-0a]
[ 0.232155] pci 0000:02:04.1: bridge window [io 0x3800-0x38ff]
[ 0.232160] pci 0000:02:04.1: bridge window [io 0x3c00-0x3cff]
[ 0.232165] pci 0000:02:04.1: bridge window [mem 0x14000000-0x17ffffff pref]
[ 0.232171] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.232175] pci 0000:00:0a.0: bridge window [io 0x3000-0x7fff]
[ 0.232180] pci 0000:00:0a.0: bridge window [mem 0xe8100000-0xe97fffff]
[ 0.232184] pci 0000:00:0a.0: bridge window [mem 0x10000000-0x17ffffff pref]
[ 0.232191] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc080000-0xfc09ffff pref]
[ 0.232195] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
[ 0.232198] pci 0000:00:0b.0: bridge window [io disabled]
[ 0.232204] pci 0000:00:0b.0: bridge window [mem 0xea000000-0xeaffffff]
[ 0.232209] pci 0000:00:0b.0: bridge window [mem 0xf8000000-0xfc0fffff pref]
[ 0.232226] pci 0000:00:0a.0: setting latency timer to 64
[ 0.232444] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19
[ 0.232469] pci 0000:02:04.0: PCI INT A -> Link[LNK1] -> GSI 19 (level, low) -> IRQ 19
[ 0.232613] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18
[ 0.232625] pci 0000:02:04.1: PCI INT B -> Link[LNK2] -> GSI 18 (level, low) -> IRQ 18
[ 0.232636] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.232640] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.232644] pci_bus 0000:00: resource 6 [mem 0x10000000-0xffffffff]
[ 0.232648] pci_bus 0000:02: resource 0 [io 0x3000-0x7fff]
[ 0.232652] pci_bus 0000:02: resource 1 [mem 0xe8100000-0xe97fffff]
[ 0.232656] pci_bus 0000:02: resource 2 [mem 0x10000000-0x17ffffff pref]
[ 0.232660] pci_bus 0000:03: resource 0 [io 0x3000-0x30ff]
[ 0.232663] pci_bus 0000:03: resource 1 [io 0x3400-0x34ff]
[ 0.232667] pci_bus 0000:03: resource 2 [mem 0x10000000-0x13ffffff pref]
[ 0.232671] pci_bus 0000:07: resource 0 [io 0x3800-0x38ff]
[ 0.232675] pci_bus 0000:07: resource 1 [io 0x3c00-0x3cff]
[ 0.232678] pci_bus 0000:07: resource 2 [mem 0x14000000-0x17ffffff pref]
[ 0.232683] pci_bus 0000:01: resource 1 [mem 0xea000000-0xeaffffff]
[ 0.232686] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfc0fffff pref]
[ 0.232751] NET: Registered protocol family 2
[ 0.232833] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.233081] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.233139] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.233199] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.233202] TCP reno registered
[ 0.233206] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.233218] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.233330] NET: Registered protocol family 1
[ 0.233436] PCI: CLS mismatch (32 != 64), using 64 bytes
[ 0.233449] pci 0000:01:00.0: Boot video device
[ 0.233538] Simple Boot Flag at 0x37 set to 0x1
[ 0.233937] audit: initializing netlink socket (disabled)
[ 0.233952] type=2000 audit(1327522467.232:1): initialized
[ 0.236029] Switched to NOHz mode on CPU #0
[ 0.264076] Trying to unpack rootfs image as initramfs...
[ 0.301447] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.308243] VFS: Disk quotas dquot_6.5.2
[ 0.308359] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.309392] fuse init (API version 7.16)
[ 0.309538] msgmni has been set to 458
[ 0.320424] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.324353] io scheduler noop registered
[ 0.324360] io scheduler deadline registered
[ 0.324416] io scheduler cfq registered (default)
[ 0.324660] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.324705] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.326117] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.327442] ACPI: AC Adapter [ACAD] (on-line)
[ 0.327561] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.327570] ACPI: Power Button [PWRB]
[ 0.327640] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.329064] ACPI: Lid Switch [LID]
[ 0.329188] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.329197] ACPI: Power Button [PWRF]
[ 0.329240] ACPI: acpi_idle registered with cpuidle
[ 0.329283] Marking TSC unstable due to TSC halts in idle
[ 0.363467] ACPI: Invalid active0 threshold
[ 0.366814] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.366820] ACPI: Thermal Zone [THRM] (63 C)
[ 0.366889] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.366927] ERST: Table is not found!
[ 0.367067] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.369086] ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 22
[ 0.369114] serial 0000:00:06.1: PCI INT B -> Link[LMCI] -> GSI 22 (level, low) -> IRQ 22
[ 0.369122] serial 0000:00:06.1: PCI INT B disabled
[ 0.369373] Linux agpgart interface v0.103
[ 0.369411] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00d1]
[ 0.369419] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[ 0.369427] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[ 0.377973] isapnp: Scanning for PnP cards...
[ 0.388177] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 0.389969] brd: module loaded
[ 0.390799] loop: module loaded
[ 0.391148] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 0.391702] Fixed MDIO Bus: probed
[ 0.391746] PPP generic driver version 2.4.2
[ 0.391832] tun: Universal TUN/TAP device driver, 1.6
[ 0.391835] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.391958] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.516405] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
[ 0.516437] ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 21 (level, low) -> IRQ 21
[ 0.516464] ehci_hcd 0000:00:02.2: setting latency timer to 64
[ 0.516469] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 0.516581] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 0.516622] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
[ 0.516650] ehci_hcd 0000:00:02.2: irq 21, io mem 0xe8004000
[ 0.528317] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 0.528580] hub 1-0:1.0: USB hub found
[ 0.528587] hub 1-0:1.0: 6 ports detected
[ 0.528694] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.528719] ohci_hcd 0000:00:02.0: enabling device (0004 -> 0006)
[ 0.528949] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
[ 0.528975] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
[ 0.529001] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.529005] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.529090] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.075778] isapnp: No Plug & Play device found
[ 1.172480] ohci_hcd 0000:00:02.0: irq 20, io mem 0xe8000000
[ 1.230373] hub 2-0:1.0: USB hub found
[ 1.230383] hub 2-0:1.0: 3 ports detected
[ 1.230482] ohci_hcd 0000:00:02.1: enabling device (0004 -> 0006)
[ 1.230703] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 22
[ 1.230711] ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 22 (level, low) -> IRQ 22
[ 1.230737] ohci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.230741] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 1.230825] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 1.433327] ACPI: Battery Slot [BAT1] (battery present)
[ 1.501500] Freeing initrd memory: 13320k freed
[ 1.516485] ohci_hcd 0000:00:02.1: irq 22, io mem 0xe8001000
[ 1.574260] hub 3-0:1.0: USB hub found
[ 1.574270] hub 3-0:1.0: 3 ports detected
[ 1.574367] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.574511] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.583227] i8042: Detected active multiplexing controller, rev 1.1
[ 1.588924] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.588942] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.588984] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.589016] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.589052] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.589234] mousedev: PS/2 mouse device common for all mice
[ 1.589440] rtc_cmos 00:06: RTC can wake from S4
[ 1.589565] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.589595] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 1.589753] device-mapper: uevent: version 1.0.3
[ 1.589882] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.589935] EISA: Probing bus 0 at eisa.0
[ 1.589940] EISA: Cannot allocate resource for mainboard
[ 1.589943] Cannot allocate resource for EISA slot 1
[ 1.589946] Cannot allocate resource for EISA slot 2
[ 1.589949] Cannot allocate resource for EISA slot 3
[ 1.589952] Cannot allocate resource for EISA slot 4
[ 1.589956] Cannot allocate resource for EISA slot 5
[ 1.589959] Cannot allocate resource for EISA slot 6
[ 1.589962] Cannot allocate resource for EISA slot 7
[ 1.589965] Cannot allocate resource for EISA slot 8
[ 1.589967] EISA: Detected 0 cards.
[ 1.589983] cpufreq-nforce2: No nForce2 chipset.
[ 1.590024] cpuidle: using governor ladder
[ 1.590085] cpuidle: using governor menu
[ 1.590088] EFI Variables Facility v0.08 2004-May-17
[ 1.590444] TCP cubic registered
[ 1.590645] NET: Registered protocol family 10
[ 1.591370] NET: Registered protocol family 17
[ 1.591401] Registering the dns_resolver key type
[ 1.591443] Using IPI No-Shortcut mode
[ 1.591595] PM: Hibernation image not present or could not be loaded.
[ 1.591610] registered taskstats version 1
[ 1.602163] Magic number: 12:138:246
[ 1.602283] rtc_cmos 00:06: setting system clock to 2012-01-25 20:14:29 UTC (1327522469)
[ 1.602290] powernow-k8: Found 1 AMD Athlon(tm) XP Processor 2800+ (1 cpu cores) (version 2.20.00)
[ 1.604269] powernow-k8: fid 0x8 (1600 MHz), vid 0x6
[ 1.604273] powernow-k8: fid 0x0 (800 MHz), vid 0x18
[ 1.604317] powernow-k8: ph2 null fid transition 0x8
[ 1.604353] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.604355] EDD information not available.
[ 1.604508] Freeing unused kernel memory: 696k freed
[ 1.605267] Write protecting the kernel text: 5340k
[ 1.605314] Write protecting the kernel read-only data: 2192k
[ 1.613419] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.642559] udevd[77]: starting version 173
[ 1.894295] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.894335] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.895105] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.895165] 8139too 0000:02:01.0: PCI INT A -> Link[LNK2] -> GSI 18 (level, low) -> IRQ 18
[ 1.907967] pata_amd 0000:00:08.0: version 0.4.1
[ 1.908076] pata_amd 0000:00:08.0: setting latency timer to 64
[ 1.912516] scsi0 : pata_amd
[ 1.916103] scsi1 : pata_amd
[ 1.916791] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2080 irq 14
[ 1.916796] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2088 irq 15
[ 1.931981] 8139too 0000:02:01.0: eth0: RealTek RTL8139 at 0x7000, 00:0f:b0:3e:6b:49, IRQ 18
[ 1.932370] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17
[ 1.932397] b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNK3] -> GSI 17 (level, low) -> IRQ 17
[ 1.932440] ssb: Core 0 found: IEEE 802.11 (cc 0x812, rev 0x02, vendor 0x4243)
[ 1.932446] ssb: Core 1 found: PCMCIA (cc 0x80D, rev 0x00, vendor 0x4243)
[ 1.932452] ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x02, vendor 0x4243)
[ 1.932458] ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[ 1.932464] ssb: Core 4 found: PCI (cc 0x804, rev 0x03, vendor 0x4243)
[ 1.935805] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[ 2.080404] ata1.00: ATA-5: HITACHI_DK23FA-40, 00M5A0A2, max UDMA/100
[ 2.080410] ata1.00: 78140160 sectors, multi 16: LBA
[ 2.080422] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13)
[ 2.088314] ata1.00: configured for UDMA/100
[ 2.088482] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23FA-4 00M5 PQ: 0 ANSI: 5
[ 2.088738] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.088993] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 2.089058] sd 0:0:0:0: [sda] Write Protect is off
[ 2.089063] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.089090] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.157507] sda: sda1 sda2 sda3
[ 2.157973] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.268304] ata2.00: ATAPI: _NEC DVD+/-RW ND-6450A, 2.36, max MWDMA2
[ 2.268317] ata2: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc6000000) ACPI=0x39f (120:600:0x12)
[ 2.316227] ata2.00: configured for MWDMA2
[ 2.368960] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-6450A 2.36 PQ: 0 ANSI: 5
[ 2.421687] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.421694] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.421880] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.421974] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.965953] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.888062] floppy0: no floppy controllers found
[ 19.944533] Adding 495612k swap on /dev/sda3. Priority:-1 extents:1 across:495612k
[ 20.011052] udevd[282]: starting version 173
[ 20.660671] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 20.770008] lp: driver loaded but no devices found
[ 20.983331] i2c i2c-0: nForce2 SMBus adapter at 0x2040
[ 20.983475] i2c i2c-1: nForce2 SMBus adapter at 0x2000
[ 21.070338] wmi: Mapper loaded
[ 21.151362] type=1400 audit(1327518889.044:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=482 comm="apparmor_parser"
[ 21.154477] type=1400 audit(1327518889.048:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=482 comm="apparmor_parser"
[ 21.154895] type=1400 audit(1327518889.048:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=482 comm="apparmor_parser"
[ 21.163414] type=1400 audit(1327518889.056:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=487 comm="apparmor_parser"
[ 21.525493] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:18/LNXVIDEO:00/input/input4
[ 21.528348] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 21.556499] parport_pc 00:0b: reported by Plug and Play ACPI
[ 21.556553] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 21.613342] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 21
[ 21.613354] Intel ICH 0000:00:06.0: PCI INT A -> Link[LACI] -> GSI 21 (level, low) -> IRQ 21
[ 21.613391] Intel ICH 0000:00:06.0: setting latency timer to 64
[ 21.656378] lp0: using parport0 (interrupt-driven).
[ 21.719775] 8139too 0000:02:01.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 22.156227] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input5
[ 22.176586] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input6
[ 22.416777] init: failsafe main process (619) killed by TERM signal
[ 22.525728] type=1400 audit(1327518890.420:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=679 comm="apparmor_parser"
[ 22.532410] type=1400 audit(1327518890.428:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=679 comm="apparmor_parser"
[ 22.532810] type=1400 audit(1327518890.428:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=679 comm="apparmor_parser"
[ 22.565313] type=1400 audit(1327518890.460:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=684 comm="apparmor_parser"
[ 22.572072] intel8x0_measure_ac97_clock: measured 54165 usecs (2632 samples)
[ 22.572078] intel8x0: clocking to 47415
[ 22.574001] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.585985] type=1400 audit(1327518890.480:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=684 comm="apparmor_parser"
[ 22.603640] type=1400 audit(1327518890.496:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=684 comm="apparmor_parser"
[ 22.756534] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:006d]
[ 22.756557] yenta_cardbus 0000:02:04.0: CardBus bridge to [bus 03-06]
[ 22.756562] yenta_cardbus 0000:02:04.0: bridge window [io 0x3000-0x30ff]
[ 22.756568] yenta_cardbus 0000:02:04.0: bridge window [io 0x3400-0x34ff]
[ 22.756574] yenta_cardbus 0000:02:04.0: bridge window [mem 0x10000000-0x13ffffff pref]
[ 22.756580] yenta_cardbus 0000:02:04.0: bridge window [mem 0xe8400000-0xe87fffff]
[ 22.756586] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions
[ 22.756591] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[ 22.756595] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 22.756601] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01111d22, devctl 0x64
[ 22.846052] cfg80211: Calling CRDA to update world regulatory domain
[ 22.996448] init: apport pre-start process (750) terminated with status 1
[ 23.032268] init: apport post-stop process (769) terminated with status 1
[ 23.077579] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0c38, PCI irq 19
[ 23.077587] yenta_cardbus 0000:02:04.0: Socket status: 30000086
[ 23.077593] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 23.077607] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x3000-0x7fff]
[ 23.077613] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff
[ 23.139262] [drm] Initialized drm 1.1.0 20060810Hors ligne
Pages : 1