Ubuntu-fr

cAsTeL

xorg.conf, Sections "Device" a doubles [résolu]

D'abord un grand merci pour ce poste car ça fonctionne et une très bonne accélération de l'affichage aussi en mode 2D.
J'aie une ou deux questions. Voici mon fichier xorg.conf et comme vous pouvez le voir certaines section sont a doubles. Est-ce quelqu'un peut me renseigner si cela est normal et comment faire pour "purifier" ce fichier.

Mon laptop est un IBM Thinkpad T41 et voici mes stats :

glxgears -printfps
6844 frames in 5.0 seconds = 1362.546 FPS
6816 frames in 5.0 seconds = 1363.186 FPS
6816 frames in 5.0 seconds = 1363.177 FPS
6793 frames in 5.0 seconds = 1358.598 FPS
6808 frames in 5.0 seconds = 1361.585 FPS

fgl_glxgears
Using GLX_SGIX_pbuffer
820 frames in 5.0 seconds = 164.000 FPS
945 frames in 5.0 seconds = 189.000 FPS
932 frames in 5.0 seconds = 186.400 FPS
965 frames in 5.0 seconds = 193.000 FPS
935 frames in 5.0 seconds = 187.000 FPS

fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY/RADEON 9000 DDR Generic
OpenGL version string: 1.3.1091 (X4.3.0-8.28.8)

fireglcontrol
Driver Version : 8.28.08
OpenGL Version : 1.3.1091

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
	InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
#	Load  "extmod"
	SubSection "extmod"
                Option    "omit xfree86-dga"
        EndSubSection
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "ch"
	Option	    "XkbVariant" "fr"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
	Identifier  "Synaptics Touchpad"
	Driver      "synaptics"
	Option	    "SendCoreEvents" "true"
	Option	    "Device" "/dev/psaux"
	Option	    "Protocol" "auto-dev"
	Option	    "HorizScrollDelta" "0"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Generic Monitor"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. Radeon R250 Lf [Radeon Mobility 9000 M9]"
	Driver      "ati"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	Option	    "DesktopSetup" "single"
	Option      "UseInternalAGPGART" "no"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. Radeon R250 Lf [Radeon Mobility 9000 M9]"
	Monitor    "Generic Monitor"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1024x768"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1024x768"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1024x768"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1024x768"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1024x768"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1024x768"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
	Option	    "Composite" "disable"
EndSection

Dernière modification par cAsTeL (Le 13/03/2007, à 17:47)

best_friend_fr

Re : xorg.conf, Sections "Device" a doubles [résolu]

Salut

Seul le fglrx est utilisé dans ton cas. Tu peux cependant garder l'autre en sauvegarde (si ca plante).

---

sudo apt-get replace langage_sms by grammaire orthographe ponctuation
La documentation est avant tout faite pour ceux qui posent les questions, et non ceux qui y répondent
Best_friend_fr

sonal

Re : xorg.conf, Sections "Device" a doubles [résolu]

Seul le fglrx est utilisé dans ton cas. Tu peux cependant garder l'autre en sauvegarde (si ca plante).

bonjour

La question que je pose n'a peut être qu'un rapport limité avec le thread (quoique).
Dans le xorg.conf de castel, il y a un busid pour le driver ati mais pas pour le fglrx.

Est-ce que ca veut dire que le busid est implicite dans le cas ou il n'y a qu'une carte graphique ?

---

Sonal

Patience et longueur de temps, font plus que force, ni que rage

ebrain

Re : xorg.conf, Sections "Device" a doubles [résolu]

Est-ce que ca veut dire que le busid est implicite dans le cas ou il n'y a qu'une carte graphique ?

Je pense simplement (peut être à tord ) que le paramètre BusID n'est pas obligatoire, et que donc le serveur autodétecte le port utilisé avant d'initialiser le driver .

@+

---

Le Blender Clan, site communautaire francophone Blender :: www.blenderclan.org ::

cAsTeL

Re : xorg.conf, Sections "Device" a doubles [résolu]

En faite j'aie finalement épuré le fichier xorg.conf et ça fonctionne.

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
	InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
#	Load  "extmod"
	SubSection "extmod"
                Option    "omit xfree86-dga"
        EndSubSection
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "ch"
	Option	    "XkbVariant" "fr"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
	Identifier  "Synaptics Touchpad"
	Driver      "synaptics"
	Option	    "SendCoreEvents" "true"
	Option	    "Device" "/dev/psaux"
	Option	    "Protocol" "auto-dev"
	Option	    "HorizScrollDelta" "0"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection


Section "Monitor"
	Identifier  "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	Option	    "DesktopSetup" "single"
	Option      "UseInternalAGPGART" "no"
	BusID       "PCI:1:0:0"
EndSection


Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
	Option	    "Composite" "disable"
EndSection