Ubuntu-fr

3Dos

[WINE] problème Xlib

EDIT: J'ai remis le xorg backupé et refait la manoeuvre. ça fonctionne maintenant... (désolé d'avoir pourri un peu avec un post ) par contre, lorsque je lance winecfg, j'ai toujours l'erreur Xlib

dos@ubuntu-dos:~$ winecfg 
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
Xlib:  extension "XFree86-DRI" missing on display ":0.0".

Bonjour tout le monde, je galère depuis un petit temps sur la résolution de mon problème et n'ayant toujours pas trouvé, je m'adresse à vous.

J'ai installé les drivers fglrx (ça s'est bien passé apparemment) et mon deuxième écran a été reconnu (c'est super me direz-vous) par contre, là où ça coince, c'est qu'il est en clone et que ça ne m'arrange pas. Donc après moultes et moultes essais, je n'y arrive pas.

Déjà quelques messages bizarres m'arrivent lorsque je lance des commandes aticonfig...

dos@ubuntu-dos:~$ sudo aticonfig --initial=dual-head
Found fglrx primary device section
Found fglrx secondary device section
screen layout section corrupted 
aticonfig: parsing the command-line failed.

ici, il me dit qu'il me manque quelque chose

dos@ubuntu-dos:~$ fglrxinfo 
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)

Comme je ne suis pas super calé (du tout) en nux, vous pourrez sans doutes m'éclairer

Et enfin, mon Xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "be"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "SyncMaster"
	HorizSync    30.0 - 81.0
	VertRefresh  56.0 - 75.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. R420 JI [Radeon X800PRO]"
	Driver      "fglrx"
	Option	    "DesktopSetup" "horizontal"
	Option	    "OverlayOnCRTC2" "1"
	BusID       "PCI:3:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. R420 JI [Radeon X800PRO]"
	Monitor    "SyncMaster"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Le modèle est une Sapphire X800 Pro (flashée avec un BIOS de X800 XT Platinum

Je vous remercie d'avance pour votre aide parce que je m'arrache les cheveux

Dernière modification par 3Dos (Le 14/03/2007, à 01:24)

floran

Re : [WINE] problème Xlib

J'ai exactement le même problème, suivit du "Direct rendering: No".

Donc une ptite aide serait sympa en effet