Pages : 1
#1 Le 11/03/2007, à 08:26
- DidUngar
K3b
Voila,
mon graveur cd n'est pas detecter.
Et le seul cas d'erreur similaire que j'ai trouver sur internet est sur le forum anglais de ubuntu.
Sans réponces.
Voila le detail de mon erreur :
System
-----------------------
K3b Version: 0.12.14
KDE Version: 3.5.2
QT Version: 3.3.6
Kernel: 2.6.15-28-386
Devices
-----------------------
HL-DT-ST DVDRAM GSA-T10N PP02 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R séquentiel; DVD-R double couche séquentiel; DVD+R double couche à saut; DVD-RAM; DVD RW à réinscription limitée; DVD-RW séquentiel; DVD+RW; DVD+R; DVD+R double couche; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Réinscription restreinte; Saut de couche]
Used versions
-----------------------
cdrecord: 2.1.1a01
cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.15-28-386
/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Error trying to open /dev/sg0 exclusively (Permission denied)... retrying in 1 second.
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
/usr/bin/X11/cdrecord: Permission denied. Cannot open '/dev/sg0'. Cannot open SCSI driver.
/usr/bin/X11/cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
/usr/bin/X11/cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
/usr/bin/X11/cdrecord:
/usr/bin/X11/cdrecord: For more information, install the cdrtools-doc
/usr/bin/X11/cdrecord: package and read /usr/share/doc/cdrecord/README.ATAPI.setup .
cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=1,0,0 speed=24 -dao driveropts=burnfree -eject -data /media/sda3/DownLoad/FireFox/kubuntu-6.10-alternate-i386.iso
Remarque : /dev/sg0 n'existe pas.
Dernière modification par DidUngar (Le 11/03/2007, à 08:27)
DidUngar.
Hors ligne
#2 Le 11/03/2007, à 08:56
- tinkywinky
Re : K3b
Salut,
as-tu lu le message en détail ?? Il te marque partout persmission denied. Tu as essayé de le lancer en root :
kdesu k3b
?
Dell XPS M1710, Core 2 Duo 2.16 Ghz, 1 Go RAM, NVidia 7900 GTX 512Mo (1.0.9755)
Debian Unstable, Kernel 2.6.21, KDE 3.5.6, Beryl SVN
Hors ligne
#3 Le 11/03/2007, à 14:18
- DidUngar
Re : K3b
Je ne voit pas l'interet d'etre root, si le répertoire n'existe pas.
Je test,
Echec :
System
-----------------------
K3b Version: 0.12.14
KDE Version: 3.5.2
QT Version: 3.3.6
Kernel: 2.6.15-28-386
Devices
-----------------------
HL-DT-ST DVDRAM GSA-T10N PP02 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R séquentiel; DVD-R double couche séquentiel; DVD+R double couche à saut; DVD-RAM; DVD RW à réinscription limitée; DVD-RW séquentiel; DVD+RW; DVD+R; DVD+R double couche; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Réinscription restreinte; Saut de couche]
Used versions
-----------------------
cdrecord: 2.1.1a01
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.15-28-386
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
/usr/bin/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-T10N '
Revision : 'PP02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0016
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13165 kB/s 74x CD 9x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 697 MB
Total size: 801 MB (79:23.21) = 357241 sectors
Lout start: 801 MB (79:25/16) = 357241 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11607 (97:27/18)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 2608
Starting to write CD/DVD at speed 24 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.016s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1029 K BSize: 1029 K
Starting new track at sector: 0
Track 01: 0 of 697 MB written.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.018s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 40.678s
Average write speed 117.3x.
Fixating...
Fixating time: 0.004s
/usr/bin/cdrecord: fifo had 64 puts and 1 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/cdrecord.mmap -v gracetime=2 dev=1,0,0 speed=24 -dao driveropts=burnfree -eject -data /media/sda3/DownLoad/FireFox/kubuntu-6.10-alternate-i386.iso
DidUngar.
Hors ligne
#4 Le 11/03/2007, à 14:22
- DidUngar
Re : K3b
En mode TAO :
System
-----------------------
K3b Version: 0.12.14
KDE Version: 3.5.2
QT Version: 3.3.6
Kernel: 2.6.15-28-386
Devices
-----------------------
HL-DT-ST DVDRAM GSA-T10N PP02 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R séquentiel; DVD-R double couche séquentiel; DVD+R double couche à saut; DVD-RAM; DVD RW à réinscription limitée; DVD-RW séquentiel; DVD+RW; DVD+R; DVD+R double couche; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Réinscription restreinte; Saut de couche]
Used versions
-----------------------
cdrecord: 2.1.1a01
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.15-28-386
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
/usr/bin/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-T10N '
Revision : 'PP02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0016
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13638 kB/s 77x CD 9x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 697 MB
Total size: 801 MB (79:23.24) = 357243 sectors
Lout start: 801 MB (79:25/18) = 357243 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11607 (97:27/18)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 2606
Starting to write CD/DVD at speed 24 in real TAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 697 MB written.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 BA 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.017s timeout 40s
/usr/bin/cdrecord: The current problem looks like a buffer underrun.
/usr/bin/cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/cdrecord: Please report.
/usr/bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 380928 bytes
Writing time: 18.300s
Average write speed 261.5x.
Fixating...
Fixating time: 27.244s
/usr/bin/cdrecord: fifo had 70 puts and 7 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 1 times full, min fill was 93%.
cdrecord command:
-----------------------
/usr/bin/cdrecord.mmap -v gracetime=2 dev=1,0,0 speed=24 -tao driveropts=burnfree -eject -data /media/sda3/DownLoad/FireFox/kubuntu-6.10-alternate-i386.iso
DidUngar.
Hors ligne
#5 Le 11/03/2007, à 14:24
- DidUngar
Re : K3b
J'ai pas comprit comment en root il fait pour trouver un répertoire qui n'existe pas.
DidUngar.
Hors ligne
#6 Le 11/03/2007, à 18:00
- xxxbe
Re : K3b
Bonjour
Ici je pense que tu pourras trouver une solution à ton problème
http://www.trustonme.net/didactels/24.html
Hors ligne
#7 Le 12/03/2007, à 15:27
- DidUngar
Re : K3b
A la 4eme étape j'ai perdu le son !
C'est normal ?
Dois-je continuer ?
DidUngar.
Hors ligne
#8 Le 12/03/2007, à 19:52
- DidUngar
Re : K3b
System
-----------------------
K3b Version: 0.12.14
KDE Version: 3.5.2
QT Version: 3.3.6
Kernel: 2.6.15-28-386
Devices
-----------------------
HL-DT-ST DVDRAM GSA-T10N PP02 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R séquentiel; DVD-R double couche séquentiel; DVD+R double couche à saut; DVD-RAM; DVD RW à réinscription limitée; DVD-RW séquentiel; DVD+RW; DVD+R; DVD+R double couche; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Réinscription restreinte; Saut de couche]
K3b
-----------------------
Size of filesystem calculated: 195
Used versions
-----------------------
cdrecord: 2.1.1a01
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.15-28-386
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
/usr/bin/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-T10N '
Revision : 'PP02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0016
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13696 kB/s 77x CD 9x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 0 MB padsize: 210 KB
Total size: 0 MB (00:04.02) = 302 sectors
Lout start: 1 MB (00:06/02) = 302 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -12900 (97:10/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 48
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Manufacturer is unknown because of the orange forum embargo.
As the orange forum likes to get money for recent information,
it may be that this media does not use illegal manufacturer coding.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 359547
Starting to write CD/DVD at speed 10 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 0 MB written.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 BA 00 00 09 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 06 90 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.016s timeout 40s
/usr/bin/cdrecord: The current problem looks like a buffer underrun.
/usr/bin/cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/cdrecord: Please report.
/usr/bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 380928 bytes
Writing time: 15.400s
Average write speed 0.3x.
Fixating...
Fixating time: 36.532s
/usr/bin/cdrecord: fifo had 7 puts and 7 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/cdrecord.mmap -v gracetime=2 dev=1,0,0 speed=10 -tao driveropts=burnfree -eject -multi -xa -tsize=195s -
mkisofs
-----------------------
195
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
Total translation table size: 0
Total rockridge attributes bytes: 1087
Total directory bytes: 2048
Path table size(bytes): 24
Max brk space used 21000
195 extents written (0 MB)
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3b8mdBua.tmp -rational-rock -hide-list /tmp/kde-root/k3bmuJdAa.tmp -joliet -hide-joliet-list /tmp/kde-root/k3bsWi16a.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bqKjgnb.tmp
DidUngar.
Hors ligne
#9 Le 12/04/2007, à 14:53
- DidUngar
Re : K3b
J'ai formatter
et kdesu k3b marche maintenant juste que ca n'est pas trés pratique.
DidUngar.
Hors ligne
Pages : 1