Ubuntu-fr

Scoutone

[résolu]Pb Neverwinter Night, message:"Error"

salut à tous,

j'ai installé Neverwinter Night sur ubuntu grace au tuto disponible dans la doc, et ca marchait impeccable.

Mais aujourd'hui, dès que je lance le jeu, il lague un coup, m'affiche "Error", des fois il me lance un son, et puis une nouvelle invite arrive sur la console.

Peut être cela vient-il d'une des mises à jours que j'ai faites aujourd'hui, mais je n'en sais rien.

J'ai essayé de le réinstaller plusieurs fois mais sans succés.

Si l'ombre d'une solution se profile dans votre esprits, n'hésitez pas

demandez aussi si vous avez besoin d'autres infos

S.

Dernière modification par Scoutone (Le 15/04/2007, à 09:14)

Scoutone

Re : [résolu]Pb Neverwinter Night, message:"Error"

up

il faut absolument que j'en profite pendant les vacances...après il sera trop tard

existe-t-il un moyen de remettre d'ancienne mise à jour quand c'est fait à partir du terminal ??
j'ai vu qu'il y a un historique avec synaptic, mais je ne vois rien de tel avec la ligne de commande.

si le pb vient de là, il sera résolu (enfin, j'espère)

merci d'avance

Scoutone

Re : [résolu]Pb Neverwinter Night, message:"Error"

un autre up
ca devient désespéré !

Okanda

Re : [résolu]Pb Neverwinter Night, message:"Error"

Tu n'as pas de messages d'erreur dans le terminal?

Scoutone

Re : [résolu]Pb Neverwinter Night, message:"Error"

non sauf quand je cherche à changer la librairie dens le nwn
erreur qui disparait qd je remets tt à la normale

néanmoins comme je suis pas un pro d'ubuntu, il doit exister des commandes qui permettent d'afficher les erreurs, auquel cas, indiquez moi ces commandes.

Dernière modification par Scoutone (Le 13/04/2007, à 16:07)

Okanda

Re : [résolu]Pb Neverwinter Night, message:"Error"

salut, tu peux essayer de lancer le jeu, puis juste après dans un terminal :

dmesg

Scoutone

Re : [résolu]Pb Neverwinter Night, message:"Error"

c'est fait, mais le résultat est assez long, je suppose qu'il s'agit de l'historique ?

sebastien@scoutbox:~$ cd /usr/local/games/NeverWinterNight/nwn/
sebastien@scoutbox:/usr/local/games/NeverWinterNight/nwn$ ./nwn
Error
sebastien@scoutbox:/usr/local/games/NeverWinterNight/nwn$ dmesg
[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
[17179569.184000]  BIOS-e820: 000000007fe90000 - 000000007fe9e000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000007fe9e000 - 000000007ff00000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[17179569.184000] 1150MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f5c40
[17179569.184000] On node 0 totalpages: 523920
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 294544 pages, LIFO batch:31
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f5aa0
[17179569.184000] ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x7fe951f7
[17179569.184000] ACPI: FADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe9ddee
[17179569.184000] ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe9de62
[17179569.184000] ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe9deca
[17179569.184000] ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe9df02
[17179569.184000] ACPI: TCPA (v001 PTLTD  CALISTGA 0x06040000  PTL 0x00000001) @ 0x7fe9df3e
[17179569.184000] ACPI: MADT (v001 PTLTD         APIC   0x06040000  LTP 0x00000000) @ 0x7fe9df70
[17179569.184000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x7fe9dfd8
[17179569.184000] ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 0x7fe96329
[17179569.184000] ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 0x7fe95c97
[17179569.184000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x7fe95243
[17179569.184000] ACPI: DSDT (v001 INTEL  CALISTGA 0x06040000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: 2 duplicate APIC table ignored.
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 6:14 APIC version 20
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec18000] gsi_base[24])
[17179569.184000] IOAPIC[1]: apic_id 2, version 255, address 0xfec18000, GSI 24-279
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[17179569.184000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda6 ro quiet splash locale=fr_FR
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] mapped IOAPIC to ffffb000 (fec18000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Console: colour VGA+ 80x25
[17179569.184000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.184000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.184000] Memory: 2067712k/2095680k available (1911k kernel code, 26660k reserved, 1073k data, 308k init, 1178176k highmem)
[17179569.184000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.184000] hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
[17179569.184000] hpet0: 3 64-bit timers, 14318180 Hz
[17179569.184000] Using HPET for base-timer
[17179569.184000] Using HPET for gettimeofday
[17179569.184000] Detected 1729.176 MHz processor.
[17179569.184000] Using hpet for high-res timesource
[17179569.268000] Calibrating delay using timer specific routine.. 3463.50 BogoMIPS (lpj=6927004)
[17179569.268000] Security Framework v1.0.0 initialized
[17179569.268000] SELinux:  Disabled at boot.
[17179569.268000] Mount-cache hash table entries: 512
[17179569.268000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[17179569.268000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[17179569.268000] monitor/mwait feature present.
[17179569.268000] using mwait in idle threads.
[17179569.268000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179569.268000] CPU: L2 cache: 2048K
[17179569.268000] CPU: Hyper-Threading is disabled
[17179569.268000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c189 00000000 00000000
[17179569.268000] Checking 'hlt' instruction... OK.
[17179569.284000] SMP alternatives: switching to UP code
[17179569.284000] checking if image is initramfs... it is
[17179570.436000] Freeing initrd memory: 5635k freed
[17179570.436000] ACPI: Core revision 20060707
[17179570.436000] ACPI: Looking for DSDT ... not found!
[17179570.464000] CPU0: Intel Genuine Intel(R) CPU           T2250  @ 1.73GHz stepping 08
[17179570.464000] SMP alternatives: switching to SMP code
[17179570.464000] Booting processor 1/1 eip 3000
[17179570.508000] Initializing CPU#1
[17179570.588000] Calibrating delay using timer specific routine.. 3458.46 BogoMIPS (lpj=6916929)
[17179570.588000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[17179570.588000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[17179570.588000] monitor/mwait feature present.
[17179570.588000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179570.588000] CPU: L2 cache: 2048K
[17179570.588000] CPU: Hyper-Threading is disabled
[17179570.588000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c189 00000000 00000000
[17179570.588000] CPU1: Intel Genuine Intel(R) CPU           T2250  @ 1.73GHz stepping 08
[17179570.588000] Total of 2 processors activated (6921.96 BogoMIPS).
[17179570.588000] ENABLING IO-APIC IRQs
[17179570.588000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.824000] checking TSC synchronization across 2 CPUs: passed.
[17179570.828000] Brought up 2 CPUs
[17179571.052000] migration_cost=8000
[17179571.052000] NET: Registered protocol family 16
[17179571.052000] EISA bus registered
[17179571.052000] ACPI: bus type pci registered
[17179571.052000] PCI: Using MMCONFIG
[17179571.052000] Setting up standard PCI resources
[17179571.064000] ACPI: Interpreter enabled
[17179571.064000] ACPI: Using IOAPIC for interrupt routing
[17179571.064000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.064000] PCI: Probing PCI hardware (bus 00)
[17179571.068000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[17179571.068000] Boot video device is 0000:01:00.0
[17179571.068000] PCI: Transparent bridge - 0000:00:1e.0
[17179571.068000] PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try 'pci=assign-busses')
[17179571.068000] Please report the result to linux-kernel to fix this permanently
[17179571.068000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.076000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[17179571.080000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[17179571.080000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[17179571.080000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[17179571.080000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[17179571.084000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[17179571.084000] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[17179571.084000] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[17179571.084000] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
[17179571.084000] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[17179571.088000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[17179571.088000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[17179571.088000] ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
[17179571.088000] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
[17179571.088000] ACPI: Embedded Controller [EC0] (gpe 23) interrupt mode.
[17179571.100000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.100000] pnp: PnP ACPI init
[17179571.104000] pnp: PnP ACPI: found 11 devices
[17179571.104000] PnPBIOS: Disabled by ACPI PNP
[17179571.104000] PCI: Using ACPI for IRQ routing
[17179571.104000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179571.104000] pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
[17179571.104000] pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
[17179571.108000] PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:01:00.0
[17179571.108000] PCI: Bridge: 0000:00:01.0
[17179571.108000]   IO window: disabled.
[17179571.108000]   MEM window: d0000000-d1ffffff
[17179571.108000]   PREFETCH window: b0000000-bfffffff
[17179571.108000] PCI: Bridge: 0000:00:1c.0
[17179571.108000]   IO window: 2000-2fff
[17179571.108000]   MEM window: c8000000-c9ffffff
[17179571.108000]   PREFETCH window: c0000000-c1ffffff
[17179571.108000] PCI: Bridge: 0000:00:1c.1
[17179571.108000]   IO window: 3000-3fff
[17179571.108000]   MEM window: ca000000-cbffffff
[17179571.108000]   PREFETCH window: c2000000-c3ffffff
[17179571.108000] PCI: Bridge: 0000:00:1c.2
[17179571.108000]   IO window: 4000-4fff
[17179571.108000]   MEM window: cc000000-cdffffff
[17179571.108000]   PREFETCH window: c4000000-c5ffffff
[17179571.108000] PCI: Bridge: 0000:00:1c.3
[17179571.108000]   IO window: 5000-5fff
[17179571.108000]   MEM window: ce000000-cfffffff
[17179571.108000]   PREFETCH window: c6000000-c7ffffff
[17179571.108000] PCI: Bus 11, cardbus bridge: 0000:0a:06.0
[17179571.108000]   IO window: 00006000-000060ff
[17179571.108000]   IO window: 00006400-000064ff
[17179571.108000]   PREFETCH window: 88000000-89ffffff
[17179571.108000]   MEM window: 8a000000-8bffffff
[17179571.108000] PCI: Bridge: 0000:00:1e.0
[17179571.108000]   IO window: 6000-6fff
[17179571.108000]   MEM window: d2000000-d20fffff
[17179571.108000]   PREFETCH window: 88000000-89ffffff
[17179571.108000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179571.108000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.108000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179571.108000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179571.108000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 169
[17179571.108000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179571.108000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179571.108000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179571.108000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
[17179571.108000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179571.108000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179571.108000] ACPI: PCI Interrupt 0000:0a:06.0[A] -> GSI 22 (level, low) -> IRQ 201
[17179571.108000] NET: Registered protocol family 2
[17179571.140000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.140000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[17179571.144000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179571.144000] TCP: Hash tables configured (established 262144 bind 65536)
[17179571.144000] TCP reno registered
[17179571.144000] Simple Boot Flag at 0x36 set to 0x1
[17179571.148000] audit: initializing netlink socket (disabled)
[17179571.148000] audit(1176567969.148:1): initialized
[17179571.148000] highmem bounce pool size: 64 pages
[17179571.148000] VFS: Disk quotas dquot_6.5.1
[17179571.148000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.148000] Initializing Cryptographic API
[17179571.148000] io scheduler noop registered
[17179571.148000] io scheduler anticipatory registered
[17179571.148000] io scheduler deadline registered
[17179571.148000] io scheduler cfq registered (default)
[17179571.148000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179571.148000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.148000] assign_interrupt_mode Found MSI capability
[17179571.148000] Allocate Port Service[0000:00:01.0:pcie00]
[17179571.148000] Allocate Port Service[0000:00:01.0:pcie03]
[17179571.148000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179571.148000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179571.148000] assign_interrupt_mode Found MSI capability
[17179571.148000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179571.148000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179571.148000] Allocate Port Service[0000:00:1c.0:pcie03]
[17179571.148000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 169
[17179571.148000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179571.148000] assign_interrupt_mode Found MSI capability
[17179571.148000] Allocate Port Service[0000:00:1c.1:pcie00]
[17179571.148000] Allocate Port Service[0000:00:1c.1:pcie02]
[17179571.148000] Allocate Port Service[0000:00:1c.1:pcie03]
[17179571.148000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179571.148000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179571.148000] assign_interrupt_mode Found MSI capability
[17179571.148000] Allocate Port Service[0000:00:1c.2:pcie00]
[17179571.148000] Allocate Port Service[0000:00:1c.2:pcie02]
[17179571.148000] Allocate Port Service[0000:00:1c.2:pcie03]
[17179571.148000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
[17179571.148000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179571.148000] assign_interrupt_mode Found MSI capability
[17179571.148000] Allocate Port Service[0000:00:1c.3:pcie00]
[17179571.148000] Allocate Port Service[0000:00:1c.3:pcie02]
[17179571.148000] Allocate Port Service[0000:00:1c.3:pcie03]
[17179571.148000] isapnp: Scanning for PnP cards...
[17179571.508000] isapnp: No Plug & Play device found
[17179571.548000] Real Time Clock Driver v1.12ac
[17179571.548000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.548000] mice: PS/2 mouse device common for all mice
[17179571.548000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.548000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.548000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.548000] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.560000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179571.568000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179571.568000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179571.568000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179571.568000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179571.568000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.572000] EISA: Probing bus 0 at eisa.0
[17179571.572000] Cannot allocate resource for EISA slot 1
[17179571.572000] Cannot allocate resource for EISA slot 2
[17179571.572000] Cannot allocate resource for EISA slot 3
[17179571.572000] Cannot allocate resource for EISA slot 4
[17179571.572000] Cannot allocate resource for EISA slot 5
[17179571.572000] Cannot allocate resource for EISA slot 6
[17179571.572000] EISA: Detected 0 cards.
[17179571.572000] TCP bic registered
[17179571.572000] NET: Registered protocol family 1
[17179571.572000] NET: Registered protocol family 8
[17179571.572000] NET: Registered protocol family 20
[17179571.572000] Starting balanced_irq
[17179571.572000] Using IPI No-Shortcut mode
[17179571.572000] ACPI: (supports S0 S3 S4 S5)
[17179571.572000] Freeing unused kernel memory: 308k freed
[17179572.196000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.712000] Capability LSM initialized
[17179572.776000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[17179572.776000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[17179572.780000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179572.780000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[17179572.780000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[17179572.780000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[17179572.792000] ACPI: Thermal Zone [TZS0] (53 C)
[17179572.796000] ACPI: Thermal Zone [TZS1] (41 C)
[17179573.456000] SCSI subsystem initialized
[17179573.460000] libata version 1.20 loaded.
[17179573.464000] ata_piix 0000:00:1f.2: version 1.05
[17179573.464000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 193
[17179573.464000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179573.464000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
[17179573.628000] ata1: dev 0 cfg 49:0f00 82:746b 83:7fe9 84:4163 85:7469 86:3d49 87:4163 88:203f
[17179573.628000] ata1: dev 0 ATA-7, max UDMA/100, 234441648 sectors: LBA48
[17179573.628000] ata1(0): applying bridge limits
[17179573.792000] ata1: dev 1 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
[17179573.792000] ata1: dev 1 ATAPI, max UDMA/33
[17179573.800000] ata1: dev 0 configured for UDMA/100
[17179573.964000] ata1: dev 1 configured for UDMA/33
[17179573.964000] scsi0 : ata_piix
[17179573.964000]   Vendor: ATA       Model: HTS421212H9AT00   Rev: HA4O
[17179573.964000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179573.964000]   Vendor: PHILIPS   Model: DVD-RAM SDVD8821  Rev: EX02
[17179573.964000]   Type:   CD-ROM                             ANSI SCSI revision: 05
[17179573.964000] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
[17179574.132000] ata2: disabling port
[17179574.132000] scsi1 : ata_piix
[17179574.152000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[17179574.152000] sda: Write Protect is off
[17179574.152000] sda: Mode Sense: 00 3a 00 00
[17179574.152000] SCSI device sda: drive cache: write back
[17179574.152000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[17179574.152000] sda: Write Protect is off
[17179574.152000] sda: Mode Sense: 00 3a 00 00
[17179574.152000] SCSI device sda: drive cache: write back
[17179574.152000]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[17179574.240000] sd 0:0:0:0: Attached scsi disk sda
[17179574.896000] ide0: I/O resource 0x1F0-0x1F7 not free.
[17179574.896000] ide0: ports already in use, skipping probe
[17179574.896000] ide1: I/O resource 0x170-0x177 not free.
[17179574.896000] ide1: ports already in use, skipping probe
[17179574.944000] usbcore: registered new driver usbfs
[17179574.944000] usbcore: registered new driver hub
[17179574.948000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 66
[17179574.948000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179574.948000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179574.948000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[17179574.948000] ehci_hcd 0000:00:1d.7: debug port 1
[17179574.948000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179574.948000] ehci_hcd 0000:00:1d.7: irq 66, io mem 0xd2304000
[17179574.952000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179574.952000] usb usb1: configuration #1 chosen from 1 choice
[17179574.952000] hub 1-0:1.0: USB hub found
[17179574.952000] hub 1-0:1.0: 8 ports detected
[17179574.992000] USB Universal Host Controller Interface driver v3.0
[17179575.056000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 66
[17179575.056000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179575.056000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179575.056000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[17179575.056000] uhci_hcd 0000:00:1d.0: irq 66, io base 0x00001800
[17179575.056000] usb usb2: configuration #1 chosen from 1 choice
[17179575.056000] hub 2-0:1.0: USB hub found
[17179575.056000] hub 2-0:1.0: 2 ports detected
[17179575.160000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 193
[17179575.160000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179575.160000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179575.160000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[17179575.160000] uhci_hcd 0000:00:1d.1: irq 193, io base 0x00001820
[17179575.160000] usb usb3: configuration #1 chosen from 1 choice
[17179575.160000] hub 3-0:1.0: USB hub found
[17179575.160000] hub 3-0:1.0: 2 ports detected
[17179575.264000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179575.264000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179575.264000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179575.264000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[17179575.264000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001840
[17179575.264000] usb usb4: configuration #1 chosen from 1 choice
[17179575.264000] hub 4-0:1.0: USB hub found
[17179575.264000] hub 4-0:1.0: 2 ports detected
[17179575.368000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[17179575.368000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179575.368000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179575.368000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[17179575.368000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001860
[17179575.368000] usb usb5: configuration #1 chosen from 1 choice
[17179575.368000] hub 5-0:1.0: USB hub found
[17179575.368000] hub 5-0:1.0: 2 ports detected
[17179575.480000] usb 1-7: new high speed USB device using ehci_hcd and address 3
[17179575.584000] Attempting manual resume
[17179575.596000] ReiserFS: sda6: found reiserfs format "3.6" with standard journal
[17179575.652000] usb 1-7: configuration #1 chosen from 1 choice
[17179575.892000] usb 4-2: new low speed USB device using uhci_hcd and address 2
[17179576.088000] usb 4-2: configuration #1 chosen from 1 choice
[17179576.224000] usbcore: registered new driver hiddev
[17179576.268000] input: HID 1241:1177 as /class/input/input1
[17179576.268000] input: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:1d.2-2
[17179576.268000] usbcore: registered new driver usbhid
[17179576.268000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179577.328000] ReiserFS: sda6: using ordered data mode
[17179577.340000] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179577.340000] ReiserFS: sda6: checking transaction log (sda6)
[17179577.412000] ReiserFS: sda6: Using r5 hash to sort names
[17179591.208000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179591.228000] Linux agpgart interface v0.101 (c) Dave Jones
[17179591.236000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179591.240000] agpgart: Detected an Intel 945GM Chipset.
[17179591.264000] agpgart: AGP aperture is 256M @ 0x0
[17179591.420000] hw_random: cannot enable RNG, aborting
[17179592.312000] ACPI: PCI Interrupt 0000:0a:06.2[A] -> GSI 22 (level, low) -> IRQ 201
[17179592.516000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[17179592.516000] sdhci: Copyright(c) Pierre Ossman
[17179592.516000] sdhci: SDHCI controller found at 0000:0a:06.3 [104c:803c] (rev 0)
[17179592.516000] ACPI: PCI Interrupt 0000:0a:06.3[A] -> GSI 22 (level, low) -> IRQ 201
[17179592.516000] mmc0: SDHCI at 0xd2005800 irq 201 PIO
[17179592.972000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 201
[17179592.972000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179593.008000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[17179593.040000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179593.044000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[17179593.108000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[17179593.108000] Uniform CD-ROM driver Revision: 3.20
[17179593.108000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[17179593.172000] ts: Compaq touchscreen protocol output
[17179593.184000] ieee80211_crypt: registered algorithm 'NULL'
[17179593.212000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179593.212000] sr 0:0:1:0: Attached scsi generic sg1 type 5
[17179593.224000] Linux video capture interface: v1.00
[17179593.272000] /home/sebastien/gspcav1-20070110/gspca_core.c: USB SPCA5XX camera found.(VC0321) 
[17179593.272000] /home/sebastien/gspcav1-20070110/gspca_core.c: [spca5xx_probe:3983] Camera type YUYV 
[17179593.280000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179593.280000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179593.480000] /home/sebastien/gspcav1-20070110/Vimicro/vc032x.h: [vc032x_probe_sensor:128] check sensor header 44
[17179593.496000] /home/sebastien/gspcav1-20070110/Vimicro/vc032x.h: [vc0321_config:350] Find Sensor PO3130NC
[17179593.500000] /home/sebastien/gspcav1-20070110/gspca_core.c: [spca5xx_getcapability:1189] maxw 640 maxh 480 minw 176 minh 144
[17179593.500000] /home/sebastien/gspcav1-20070110/gspca_core.c: data format set to RGB
[17179593.500000] usbcore: registered new driver gspca
[17179593.500000] /home/sebastien/gspcav1-20070110/gspca_core.c: gspca driver 01.00.12 registered
[17179593.812000] nvidia: module license 'NVIDIA' taints kernel.
[17179594.112000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0mp
[17179594.112000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[17179594.260000] hda_intel: azx_get_response timeout, switching to single_cmd mode...
[17179614.552000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179614.552000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[17179614.552000] eth0: Identified chip type is 'RTL8168B/8111B'.
[17179614.552000] eth0: r10001.02, the Linux device driver for Realtek Ethernet Controllers at 0x2000, 00:16:d3:41:68:07, IRQ 169
[17179614.556000] eth0: Auto-negotiation Enabled.
[17179622.272000] Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter
[17179622.272000] Driver version:1.02
[17179622.272000] Released date:2006/02/23
[17179622.272000] Link Status:Not Linked
[17179622.272000] I/O Base:0x2000(I/O port)
[17179622.272000] IRQ:169
[17179622.272000] ACPI: PCI Interrupt 0000:0a:06.0[A] -> GSI 22 (level, low) -> IRQ 201
[17179622.272000] Yenta: CardBus bridge found at 0000:0a:06.0 [1025:0107]
[17179622.272000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179622.272000] Yenta: Routing CardBus interrupts to PCI
[17179622.272000] Yenta TI: socket 0000:0a:06.0, mfunc 0x01aa1b22, devctl 0x64
[17179622.504000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 201
[17179622.504000] Socket status: 30000006
[17179622.504000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0a to #0e
[17179622.504000] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[17179622.504000] cs: IO port probe 0x6000-0x6fff: clean.
[17179622.504000] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff
[17179622.504000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
[17179622.504000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179622.504000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[17179622.504000] NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9746  Fri Dec 15 09:54:45 PST 2006
[17179622.508000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179622.508000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[17179622.512000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[17179623.224000] cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
[17179623.228000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[17179623.228000] cs: IO port probe 0x820-0x8ff: clean.
[17179623.228000] cs: IO port probe 0xc00-0xcf7: clean.
[17179623.232000] cs: IO port probe 0xa00-0xaff: clean.
[17179623.856000] lp: driver loaded but no devices found
[17179623.964000] Adding 1951856k swap on /dev/disk/by-uuid/25653788-3bcf-4d6d-a6fd-d09bbb40e45f.  Priority:-1 extents:1 across:1951856k
[17179624.824000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[17179642.940000] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[17179642.980000] ReiserFS: sda7: using ordered data mode
[17179642.988000] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179642.988000] ReiserFS: sda7: checking transaction log (sda7)
[17179643.004000] ReiserFS: sda7: Using r5 hash to sort names
[17179643.028000] ReiserFS: sda8: found reiserfs format "3.6" with standard journal
[17179643.728000] ReiserFS: sda8: using ordered data mode
[17179643.748000] ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179643.752000] ReiserFS: sda8: checking transaction log (sda8)
[17179643.800000] ReiserFS: sda8: Using r5 hash to sort names
[17179646.108000] ACPI: AC Adapter [ADP1] (off-line)
[17179646.280000] pcc_acpi: loading...
[17179646.304000] ACPI: Power Button (FF) [PWRF]
[17179646.304000] ACPI: Lid Switch [LID0]
[17179646.304000] ACPI: Sleep Button (CM) [SLPB]
[17179646.380000] ibm_acpi: ec object not found
[17179646.508000] ACPI: Battery Slot [BAT0] (battery present)
[17179646.536000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[17179646.536000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[17179651.536000] apm: BIOS not found.
[17179662.968000] NET: Registered protocol family 10
[17179662.968000] lo: Disabled Privacy Extensions
[17179662.968000] IPv6 over IPv4 tunneling driver
[17179663.984000] Bluetooth: Core ver 2.8
[17179663.984000] NET: Registered protocol family 31
[17179663.984000] Bluetooth: HCI device and connection manager initialized
[17179663.984000] Bluetooth: HCI socket layer initialized
[17179664.096000] Bluetooth: L2CAP ver 2.8
[17179664.096000] Bluetooth: L2CAP socket layer initialized
[17179664.144000] Bluetooth: RFCOMM socket layer initialized
[17179664.144000] Bluetooth: RFCOMM TTY layer initialized
[17179664.144000] Bluetooth: RFCOMM ver 1.7
[17179672.292000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17179672.296000] ISOFS: changing to secondary root
[17179685.420000] usb 1-1: new high speed USB device using ehci_hcd and address 4
[17179685.552000] usb 1-1: configuration #1 chosen from 1 choice
[17179685.652000] usbcore: registered new driver libusual
[17179685.816000] Initializing USB Mass Storage driver...
[17179685.816000] scsi2 : SCSI emulation for USB Mass Storage devices
[17179685.816000] usb-storage: device found at 4
[17179685.816000] usb-storage: waiting for device to settle before scanning
[17179685.816000] usbcore: registered new driver usb-storage
[17179685.816000] USB Mass Storage support registered.
[17179690.816000] usb-storage: device scan complete
[17179690.820000]   Vendor: Samsung   Model: YP-U1             Rev: 2000
[17179690.820000]   Type:   Direct-Access                      ANSI SCSI revision: 04
[17179690.832000] SCSI device sdb: 2033920 512-byte hdwr sectors (1041 MB)
[17179690.832000] sdb: Write Protect is off
[17179690.832000] sdb: Mode Sense: 38 00 00 00
[17179690.832000] sdb: assuming drive cache: write through
[17179690.836000] SCSI device sdb: 2033920 512-byte hdwr sectors (1041 MB)
[17179690.836000] sdb: Write Protect is off
[17179690.836000] sdb: Mode Sense: 38 00 00 00
[17179690.836000] sdb: assuming drive cache: write through
[17179690.836000]  sdb: sdb1
[17179690.836000] sd 2:0:0:0: Attached scsi removable disk sdb
[17179690.836000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[17179691.216000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

je m'excuse pour la longueur, mais comme ca rien n'est oublié

merci de ton aide

Okanda

Re : [résolu]Pb Neverwinter Night, message:"Error"

Je ne vois rien sur Never hormis le petit error en haut de page.
Bizarre ça.

L'apparition de l'erreur ne correspondant pas à une mise à jour du système par hasard?
à tout hasard, que te donne un

 glxinfo | grep "direct rendering"

?
C'est pour vérifié que tu as bien l'accélération graphique. Il y a eu une MAJ du noyau il y a quelques temps.

Scoutone

Re : [résolu]Pb Neverwinter Night, message:"Error"

bien joué
l'erreur doit venir de là:
dès que je tape glxinfo, la session redémarre, et j'ai eu le même pb lorsque je compilais un programme avec OpenGL (les 2 doivent être liés)

donc le pb viens de l'accélération 3D, mais vu que la j'ai pas internet, ya possibilité de revenir en arrière?? je dois pouvoir forcer l'installation d'une vieille version d'un paquet si j'en connais le nom...
donc si tu sais le nom du paquet concerné...

mersi du coup de main

Okanda

Re : [résolu]Pb Neverwinter Night, message:"Error"

Tu as une ATI ou une NVIDIA?
ATI je ne connais pas du tout. Pour NVIDIA il y a des paquets pour les drivers libres et un paquet en .deb pour les drivers proprio, téléchargeable et installable en suivant ce tuto.
Tu dois bien avoir internet pour poster?
Donc si ta carte le supporte je te conseille les drivers proprio. Comme ça tu récupères le paquet, tu le transferts sur ta Ubuntu et le tu l'installes.

Sinon pour les paquets dispo dans les dépots (les drivers libres) les paquets pour Edgy sont :
nvidia-glx
et les restricted-modules-2.6.11-17-generic (enfin selon ton noyau)

voir ici : http://doc.ubuntu-fr.org/nvidia.run

Par contre si tu as une ATI je te laisse chercher dans la doc parce-que là je n'y connais que dalle.

Bonne chance. . .

PS : et si tu veux un bon serveur à l'ancienne où la difficulté prime sur le grosbillisme je te conseil MoPa (Monde Parallèle) dans la section action. Il est malheureusement souvent déserté ces derniers temps mais ça reste un super serveur.

Dernière modification par Okanda (Le 14/04/2007, à 21:50)

Scoutone

Re : [résolu]Pb Neverwinter Night, message:"Error"

hop, c'est bon, j'avais installé les drivers proprio avec envy, et donc j'ai juste eu a refaire la manoeuvre, et tout marche impeccable !

pour internet, c'est un autre ordi connecté en 56K, donc...

en tout cas merci de ton aide, je vais pouvoir en profiter, et je met le topic en résolu !