Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 12/04/2007, à 13:00

Tornado

problème de chargement GLX sur NVidia ?

Bonjour à tous,

Je suis passé de Drapper à Edgy le week end dernier. J'utilisais XGL et Compiz sans problème.

Maintenant avec la Edgy je souhait utiliser XGL et Beryl.

J'ai bien suivi les tutos respectifs, mais il me semble qu'il y est un problème avec mon driver NVidia
(j'ai une 7900GT)
J'ai essayé avec Envy et à la main, tout fonctionne parfaitement, j'ai l'accélération 3D etc,... mais quand je reboot, j'ai l'erreur du serveur X me disant que le xorg.conf est mal configuré, et je suis obligé de remettre le driver par défaut "nv" pour pouvoir lancer X,... et donc bah du coup, pas de XGL !

le module du driver est pourtant bien chargé :

 lsmod
Module                  Size  Used by
nvidia               7774104  32

et pourtant

glxinfo | grep "direct rendering"
direct rendering: No

et voici mon xorg.cong

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder26)  Mon Feb 26 23:37:58 PST 2007

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg
#Section "Extensions"
#    Option         "Composite" "Enable"
#EndSection

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "L90D+ DVI"
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NVIDIA Default Card"
    Driver         "nvidia"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NVIDIA Default Card"
    Monitor        "L90D+ DVI"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "True"
    SubSection     "Display"
        Depth       1
        Modes      "1280x1024" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1280x1024" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1280x1024" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1280x1024" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x1024" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

J'ai essayé tout ce que je connaissais, mais là je suis bloqué

merci par avance

Hors ligne

#2 Le 16/04/2007, à 17:35

Lestat the vampire

Re : problème de chargement GLX sur NVidia ?

Salut !
Pour commencer, tu n'as plus besoin de XGL pour utiliser beryl sous edgy (cf le wiki). Je te suggere donc tout simplement de le virer ! smile
Pour tes drivers nvidia, je te suggere d'utiliser envy (la derniere version bien sur) en mode textuel (cf wiki) et d'utiliser l'option 6 "Clean the Installation of any Nvidia driver".
Ensuite, un petit reboot et tu installes les drivers nvidia de manière automatique (toujours avec envy) sur un système propre.
Tu peux ensuite installer beryl et l'utiliser directement avec les derniers drivers nvidia (9755).
Voila !

PS : j'ai la meme carte graphique et le meme ecran et ca fonctionne tres bien donc fais bien le ménage et ca tournera impec !

Dernière modification par Lestat the vampire (Le 16/04/2007, à 17:36)

Hors ligne