#1 Le 15/04/2012, à 00:36
- yggy
Où est passé Grub ? Problème Lubuntu et Jolicloud
Bonsoir à tous,
j'ai un sacré problème là. Je viens d'installer Jolicloud en live usb en ayant pris soin de choisir l'installation "côte à côte" pour ne pas flinguer la partition avec Lubuntu. D'ailleurs, elle est bien là car quand je vais dans les options de Jolicloud, j'ai bien les partitions avec celle de Lubuntu et les dossiers (root, home,...) . De plus, Grub est installé, je l'avais installé à l'installation de Lubuntu.
Ce que je ne comprends pas, c'est que quand je démarre le netbook, j'arrive directement sur le lancement de Jolicloud sans même passer par une interface me demandant de choisir entre Lub ou Joli...
C'est bien Jolicloud, mais...Je préfère mon ptit Lubuntu!!!
Des idées ?
Le compliment diminue l'homme (Guy Roux)
Hors ligne
#2 Le 15/04/2012, à 00:54
- Arbiel
Re : Où est passé Grub ? Problème Lubuntu et Jolicloud
Bonsoir
Pour que quelqu'un puisse t'aider, peux-tu faire un rapport BootInfo, soit avec boot-repair, soit avec le script BootInfoScript.sh et publier ici le rapport
Arbiel Perlacremaz
LDLC Aurore NK3S-8-S4 Ubuntu 20.04
Abandon d'azerty au profit de bépo, de google au profit de Lilo et de la messagerie électronique violable au profit de Protonmail, une messagerie chiffrée de poste de travail à poste de travail.
Hors ligne
#3 Le 15/04/2012, à 02:16
- yggy
Re : Où est passé Grub ? Problème Lubuntu et Jolicloud
Il me trouve pas le paquet boot-repair...aie aie aie, ce jolicloud
C'est bon, j'ai exécuté le script et voilà le résultat
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 6 for /boot/grub.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.10
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf /boot/grub/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Joli OS 1.2
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda7: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 42,215,423 42,213,376 83 Linux
/dev/sda2 205,537,278 312,580,095 107,042,818 5 Extended
/dev/sda5 310,505,472 312,580,095 2,074,624 82 Linux swap / Solaris
/dev/sda6 205,537,280 306,122,751 100,585,472 83 Linux
/dev/sda7 306,124,800 310,503,423 4,378,624 82 Linux swap / Solaris
/dev/sda3 105,705,472 205,536,142 99,830,671 b W95 FAT32
/dev/sda4 42,215,424 105,705,471 63,490,048 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 13abd2af-b108-4866-b8df-46393590d0c8 ext4
/dev/sda3 FBB4-8BEA vfat
/dev/sda4 a47efa46-f5c6-490b-8e00-af142fb67fb3 ext4
/dev/sda5 7e9ffb7b-9564-455f-9c3e-bafe5d6f37f4 swap
/dev/sda6 ed5dc2bd-4051-46dc-b797-9ca479f5d966 ext4
/dev/sda7 83fed90c-8ebf-4313-b9f9-353bf5328084 swap
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /media/13abd2af-b108-4866-b8df-46393590d0c8 ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sda3 /media/FBB4-8BEA vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1)
/dev/sda4 /media/a47efa46-f5c6-490b-8e00-af142fb67fb3 ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sda6 / ext4 (rw,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
set locale_dir=($root)/boot/grub/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry 'Ubuntu, avec Linux 3.0.0-19-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
echo 'Chargement de Linux 3.0.0-19-generic ...'
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.0.0-19-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, avec Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, avec Linux 3.0.0-12-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
echo 'Chargement de Linux 3.0.0-12-generic ...'
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.0.0-12-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=13abd2af-b108-4866-b8df-46393590d0c8 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=7e9ffb7b-9564-455f-9c3e-bafe5d6f37f4 none swap sw 0 0
--------------------------------------------------------------------------------
====================== sda1/boot/extlinux/extlinux.conf: =======================
--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update
default l0
prompt 1
timeout 50
include themes/debian/theme.cfg
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
3.558929443 = 3.821371392 boot/grub/core.img 1
2.864540100 = 3.075776512 boot/grub/grub.cfg 1
4.138168335 = 4.443324416 boot/initrd.img-3.0.0-12-generic 1
0.958999634 = 1.029718016 boot/initrd.img-3.0.0-19-generic 1
0.055953979 = 0.060080128 boot/vmlinuz-3.0.0-12-generic 1
4.730533600 = 5.079371776 boot/vmlinuz-3.0.0-19-generic 1
4.730533600 = 5.079371776 vmlinuz 1
0.055953979 = 0.060080128 vmlinuz.old 1
================= sda1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
4.445678711 = 4.773511168 boot/extlinux/chain.c32 1
4.182464600 = 4.490887168 boot/extlinux/extlinux.conf 1
============== sda1: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/chain.c32 : COM32R module (v4.xx)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=800x600
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
set locale_dir=($root)/boot/grub/locale
set lang=
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Joli OS, with Linux 2.6.35.10-1-jolicloud-atom' --class joli os --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
echo 'Loading Linux 2.6.35.10-1-jolicloud-atom ...'
linux /boot/vmlinuz-2.6.35.10-1-jolicloud-atom root=UUID=ed5dc2bd-4051-46dc-b797-9ca479f5d966 ro acpi_osi=Linux acpi_backlight=vendor acpi_skip_timer nomodeset video=uvesafb:mode_option=800x600-24,mtrr=3,scroll=ywrap pci=nocrs quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35.10-1-jolicloud-atom
}
menuentry 'Joli OS, with Linux 2.6.35.10-1-jolicloud-atom (recovery mode)' --class joli os --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
echo 'Loading Linux 2.6.35.10-1-jolicloud-atom ...'
linux /boot/vmlinuz-2.6.35.10-1-jolicloud-atom root=UUID=ed5dc2bd-4051-46dc-b797-9ca479f5d966 ro single acpi_osi=Linux acpi_backlight=vendor acpi_skip_timer nomodeset video=uvesafb:mode_option=800x600-24,mtrr=3,scroll=ywrap pci=nocrs
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35.10-1-jolicloud-atom
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, avec Linux 3.0.0-19-generic (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry "Ubuntu, avec Linux 3.0.0-19-generic (mode de dépannage) (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry "Ubuntu, avec Linux 3.0.0-12-generic (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Ubuntu, avec Linux 3.0.0-12-generic (mode de dépannage) (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-12-generic
}
if [ ${timeout} != -1 ]; then
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda6 during installation
UUID=ed5dc2bd-4051-46dc-b797-9ca479f5d966 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda7 during installation
UUID=83fed90c-8ebf-4313-b9f9-353bf5328084 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
112.149074554 = 120.419151872 boot/grub/core.img 1
110.215007782 = 118.342463488 boot/grub/grub.cfg 2
98.367187500 = 105.620963328 boot/initrd.img-2.6.35.10-1-jolicloud-atom 3
112.144775391 = 120.414535680 boot/vmlinuz-2.6.35.10-1-jolicloud-atom 1
98.367187500 = 105.620963328 initrd.img 3
112.144775391 = 120.414535680 vmlinuz 1
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
Voila...Si des insomniaques passent par là...et peuvent m'aider ? Sinon, j'attendrai!
J'édite ce message, après quelques manips, j'ai installé un nouvel ubuntu que je voulais tester sur mon netbook , le ubuntu 10.04
Du coup, ça m'a réinstallé grub et là, génial j'ai pu rebooté sur l'OS que je voulais!!! Sauf que...
J'ai un problème, je ne peux plus accéder à Lubuntu...J'arrive à booter sur Uuntu 10.04, sur Jolicloud, mais plus sur Lubuntu...
Du coup, j'ai refait un script, si quelqu'un peut m'aider!
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 4 for /boot/grub.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.10
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf /boot/grub/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Joli OS 1.2
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda7: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.4 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 42,215,423 42,213,376 83 Linux
/dev/sda2 205,537,278 312,580,095 107,042,818 5 Extended
/dev/sda5 310,505,472 312,580,095 2,074,624 82 Linux swap / Solaris
/dev/sda6 205,537,280 306,122,751 100,585,472 83 Linux
/dev/sda7 306,124,800 310,503,423 4,378,624 82 Linux swap / Solaris
/dev/sda3 105,705,472 205,536,142 99,830,671 b W95 FAT32
/dev/sda4 42,215,424 105,705,471 63,490,048 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 13abd2af-b108-4866-b8df-46393590d0c8 ext4
/dev/sda3 FBB4-8BEA vfat
/dev/sda4 e80494db-b2a9-4ddc-9934-58c575d969b8 ext4
/dev/sda5 7e9ffb7b-9564-455f-9c3e-bafe5d6f37f4 swap
/dev/sda6 ed5dc2bd-4051-46dc-b797-9ca479f5d966 ext4
/dev/sda7 83fed90c-8ebf-4313-b9f9-353bf5328084 swap
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /media/13abd2af-b108-4866-b8df-46393590d0c8 ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sda3 /media/FBB4-8BEA vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1)
/dev/sda4 /media/e80494db-b2a9-4ddc-9934-58c575d969b8 ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sda6 / ext4 (rw,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
set locale_dir=($root)/boot/grub/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, avec Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry 'Ubuntu, avec Linux 3.0.0-19-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
echo 'Chargement de Linux 3.0.0-19-generic ...'
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.0.0-19-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, avec Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, avec Linux 3.0.0-12-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
echo 'Chargement de Linux 3.0.0-12-generic ...'
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro recovery nomodeset
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-3.0.0-12-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 13abd2af-b108-4866-b8df-46393590d0c8
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, avec Linux 2.6.32-40-generic (on /dev/sda4)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos4)'
search --no-floppy --fs-uuid --set=root e80494db-b2a9-4ddc-9934-58c575d969b8
linux /boot/vmlinuz-2.6.32-40-generic root=UUID=e80494db-b2a9-4ddc-9934-58c575d969b8 ro quiet splash
initrd /boot/initrd.img-2.6.32-40-generic
}
menuentry "Ubuntu, avec Linux 2.6.32-40-generic (mode de dépannage) (on /dev/sda4)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos4)'
search --no-floppy --fs-uuid --set=root e80494db-b2a9-4ddc-9934-58c575d969b8
linux /boot/vmlinuz-2.6.32-40-generic root=UUID=e80494db-b2a9-4ddc-9934-58c575d969b8 ro single
initrd /boot/initrd.img-2.6.32-40-generic
}
menuentry "Ubuntu, avec Linux 2.6.31-14-generic (on /dev/sda4)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos4)'
search --no-floppy --fs-uuid --set=root e80494db-b2a9-4ddc-9934-58c575d969b8
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=e80494db-b2a9-4ddc-9934-58c575d969b8 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, avec Linux 2.6.31-14-generic (mode de dépannage) (on /dev/sda4)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos4)'
search --no-floppy --fs-uuid --set=root e80494db-b2a9-4ddc-9934-58c575d969b8
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=e80494db-b2a9-4ddc-9934-58c575d969b8 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Joli OS, with Linux 2.6.35.10-1-jolicloud-atom (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root ed5dc2bd-4051-46dc-b797-9ca479f5d966
linux /boot/vmlinuz-2.6.35.10-1-jolicloud-atom root=UUID=ed5dc2bd-4051-46dc-b797-9ca479f5d966 ro acpi_osi=Linux acpi_backlight=vendor acpi_skip_timer nomodeset video=uvesafb:mode_option=800x600-24,mtrr=3,scroll=ywrap pci=nocrs quiet splash
initrd /boot/initrd.img-2.6.35.10-1-jolicloud-atom
}
menuentry "Joli OS, with Linux 2.6.35.10-1-jolicloud-atom (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root ed5dc2bd-4051-46dc-b797-9ca479f5d966
linux /boot/vmlinuz-2.6.35.10-1-jolicloud-atom root=UUID=ed5dc2bd-4051-46dc-b797-9ca479f5d966 ro single acpi_osi=Linux acpi_backlight=vendor acpi_skip_timer nomodeset video=uvesafb:mode_option=800x600-24,mtrr=3,scroll=ywrap pci=nocrs
initrd /boot/initrd.img-2.6.35.10-1-jolicloud-atom
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=13abd2af-b108-4866-b8df-46393590d0c8 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=7e9ffb7b-9564-455f-9c3e-bafe5d6f37f4 none swap sw 0 0
--------------------------------------------------------------------------------
====================== sda1/boot/extlinux/extlinux.conf: =======================
--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update
default l0
prompt 1
timeout 50
include themes/debian/theme.cfg
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
3.558929443 = 3.821371392 boot/grub/core.img 1
0.204109192 = 0.219160576 boot/grub/grub.cfg 1
4.138168335 = 4.443324416 boot/initrd.img-3.0.0-12-generic 1
0.958999634 = 1.029718016 boot/initrd.img-3.0.0-19-generic 1
0.055953979 = 0.060080128 boot/vmlinuz-3.0.0-12-generic 1
4.730533600 = 5.079371776 boot/vmlinuz-3.0.0-19-generic 1
4.730533600 = 5.079371776 vmlinuz 1
0.055953979 = 0.060080128 vmlinuz.old 1
================= sda1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
4.445678711 = 4.773511168 boot/extlinux/chain.c32 1
4.182464600 = 4.490887168 boot/extlinux/extlinux.conf 1
============== sda1: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/chain.c32 : COM32R module (v4.xx)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=800x600
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
set locale_dir=($root)/boot/grub/locale
set lang=
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Joli OS, with Linux 2.6.35.10-1-jolicloud-atom' --class joli os --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
echo 'Loading Linux 2.6.35.10-1-jolicloud-atom ...'
linux /boot/vmlinuz-2.6.35.10-1-jolicloud-atom root=UUID=ed5dc2bd-4051-46dc-b797-9ca479f5d966 ro acpi_osi=Linux acpi_backlight=vendor acpi_skip_timer nomodeset video=uvesafb:mode_option=800x600-24,mtrr=3,scroll=ywrap pci=nocrs quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35.10-1-jolicloud-atom
}
menuentry 'Joli OS, with Linux 2.6.35.10-1-jolicloud-atom (recovery mode)' --class joli os --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
echo 'Loading Linux 2.6.35.10-1-jolicloud-atom ...'
linux /boot/vmlinuz-2.6.35.10-1-jolicloud-atom root=UUID=ed5dc2bd-4051-46dc-b797-9ca479f5d966 ro single acpi_osi=Linux acpi_backlight=vendor acpi_skip_timer nomodeset video=uvesafb:mode_option=800x600-24,mtrr=3,scroll=ywrap pci=nocrs
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35.10-1-jolicloud-atom
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, avec Linux 3.0.0-19-generic (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry "Ubuntu, avec Linux 3.0.0-19-generic (mode de dépannage) (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry "Ubuntu, avec Linux 3.0.0-12-generic (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Ubuntu, avec Linux 3.0.0-12-generic (mode de dépannage) (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-12-generic
}
if [ ${timeout} != -1 ]; then
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda6 during installation
UUID=ed5dc2bd-4051-46dc-b797-9ca479f5d966 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda7 during installation
UUID=83fed90c-8ebf-4313-b9f9-353bf5328084 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
112.149074554 = 120.419151872 boot/grub/core.img 1
110.215007782 = 118.342463488 boot/grub/grub.cfg 2
98.367187500 = 105.620963328 boot/initrd.img-2.6.35.10-1-jolicloud-atom 3
112.144775391 = 120.414535680 boot/vmlinuz-2.6.35.10-1-jolicloud-atom 1
98.367187500 = 105.620963328 initrd.img 3
112.144775391 = 120.414535680 vmlinuz 1
=========================== sda4/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set e80494db-b2a9-4ddc-9934-58c575d969b8
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set e80494db-b2a9-4ddc-9934-58c575d969b8
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, avec Linux 2.6.32-40-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set e80494db-b2a9-4ddc-9934-58c575d969b8
linux /boot/vmlinuz-2.6.32-40-generic root=UUID=e80494db-b2a9-4ddc-9934-58c575d969b8 ro quiet splash
initrd /boot/initrd.img-2.6.32-40-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-40-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set e80494db-b2a9-4ddc-9934-58c575d969b8
echo 'Chargement de Linux 2.6.32-40-generic ...'
linux /boot/vmlinuz-2.6.32-40-generic root=UUID=e80494db-b2a9-4ddc-9934-58c575d969b8 ro single
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-2.6.32-40-generic
}
menuentry 'Ubuntu, avec Linux 2.6.31-14-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set e80494db-b2a9-4ddc-9934-58c575d969b8
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=e80494db-b2a9-4ddc-9934-58c575d969b8 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry 'Ubuntu, avec Linux 2.6.31-14-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set e80494db-b2a9-4ddc-9934-58c575d969b8
echo 'Chargement de Linux 2.6.31-14-generic ...'
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=e80494db-b2a9-4ddc-9934-58c575d969b8 ro single
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set e80494db-b2a9-4ddc-9934-58c575d969b8
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set e80494db-b2a9-4ddc-9934-58c575d969b8
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, avec Linux 3.0.0-19-generic (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry "Ubuntu, avec Linux 3.0.0-19-generic (mode de dépannage) (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry "Ubuntu, avec Linux 3.0.0-12-generic (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Ubuntu, avec Linux 3.0.0-12-generic (mode de dépannage) (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Joli OS, with Linux 2.6.35.10-1-jolicloud-atom (on /dev/sda6)" {
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
linux /boot/vmlinuz-2.6.35.10-1-jolicloud-atom root=UUID=ed5dc2bd-4051-46dc-b797-9ca479f5d966 ro acpi_osi=Linux acpi_backlight=vendor acpi_skip_timer nomodeset video=uvesafb:mode_option=800x600-24,mtrr=3,scroll=ywrap pci=nocrs quiet splash
initrd /boot/initrd.img-2.6.35.10-1-jolicloud-atom
}
menuentry "Joli OS, with Linux 2.6.35.10-1-jolicloud-atom (recovery mode) (on /dev/sda6)" {
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set ed5dc2bd-4051-46dc-b797-9ca479f5d966
linux /boot/vmlinuz-2.6.35.10-1-jolicloud-atom root=UUID=ed5dc2bd-4051-46dc-b797-9ca479f5d966 ro single acpi_osi=Linux acpi_backlight=vendor acpi_skip_timer nomodeset video=uvesafb:mode_option=800x600-24,mtrr=3,scroll=ywrap pci=nocrs
initrd /boot/initrd.img-2.6.35.10-1-jolicloud-atom
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sda4/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda4 during installation
UUID=e80494db-b2a9-4ddc-9934-58c575d969b8 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=7e9ffb7b-9564-455f-9c3e-bafe5d6f37f4 none swap sw 0 0
# swap was on /dev/sda7 during installation
UUID=83fed90c-8ebf-4313-b9f9-353bf5328084 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sda4: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
21.904422760 = 23.519694848 boot/grub/core.img 1
21.904449463 = 23.519723520 boot/grub/grub.cfg 2
24.617080688 = 26.432389120 boot/initrd.img-2.6.31-14-generic 1
24.187126160 = 25.970728960 boot/initrd.img-2.6.32-40-generic 1
22.395225525 = 24.046690304 boot/vmlinuz-2.6.31-14-generic 1
23.946155548 = 25.711988736 boot/vmlinuz-2.6.32-40-generic 2
24.187126160 = 25.970728960 initrd.img 1
24.617080688 = 26.432389120 initrd.img.old 1
23.946155548 = 25.711988736 vmlinuz 2
22.395225525 = 24.046690304 vmlinuz.old 1
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
Merci pour votre aide!
Dernière modification par yggy (Le 15/04/2012, à 05:29)
Le compliment diminue l'homme (Guy Roux)
Hors ligne
#4 Le 15/04/2012, à 14:34
- yggy
Re : Où est passé Grub ? Problème Lubuntu et Jolicloud
Bonjour, je ne sais pas si je peux le faire, mais up...! Va-t-il falloir que je réinstalle Lubuntu ?
Le compliment diminue l'homme (Guy Roux)
Hors ligne
#5 Le 15/04/2012, à 15:37
- Arbiel
Re : Où est passé Grub ? Problème Lubuntu et Jolicloud
Bonjour
Attends un peu avant d'entreprendre quoi que ce soit. Je réfléchis à ton problème, et je t'informe de ce que je trouve dès que possible.
Mais, tu sais, nous ne sommes pas le petit doigt sur la couture sur le pli du pantalon en attendant des ordres et c'est tout à fait bénévolement que nous, moi-même à l'instant, ou d'autres, intervenons pour aider ceux qui ont des difficultés.
Alors, s'il te plaît, pas d'impatience.
Arbiel Perlacremaz
LDLC Aurore NK3S-8-S4 Ubuntu 20.04
Abandon d'azerty au profit de bépo, de google au profit de Lilo et de la messagerie électronique violable au profit de Protonmail, une messagerie chiffrée de poste de travail à poste de travail.
Hors ligne
#6 Le 15/04/2012, à 15:57
- Arbiel
Re : Où est passé Grub ? Problème Lubuntu et Jolicloud
Dans ta partition /dev/sda4, tu as un dossier /boot/grub dans lequel se trouve un fichier grub.cfg
Fais une copie de sauvegarde de ce fichier, en l'appelant par exemple save.grub.cfg et modifie le fichier grub.cfg de la manière suivante :
Cherche les lignes
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, avec Linux 3.0.0-19-generic (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry "Ubuntu, avec Linux 3.0.0-19-generic (mode de dépannage) (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry "Ubuntu, avec Linux 3.0.0-12-generic (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Ubuntu, avec Linux 3.0.0-12-generic (mode de dépannage) (on /dev/sda1)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 13abd2af-b108-4866-b8df-46393590d0c8
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=13abd2af-b108-4866-b8df-46393590d0c8 ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-12-generic
}
if [ ${timeout} != -1 ]; then
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
### END /etc/grub.d/30_os-prober ###
et supprime les cinq dernières lignes
if [ ${timeout} != -1 ]; then
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
Et dis moi si tu vois apparaître le menu de Grub.
Nous verrons plus tard quelles autres modifications faire.
Arbiel Perlacremaz
LDLC Aurore NK3S-8-S4 Ubuntu 20.04
Abandon d'azerty au profit de bépo, de google au profit de Lilo et de la messagerie électronique violable au profit de Protonmail, une messagerie chiffrée de poste de travail à poste de travail.
Hors ligne
#7 Le 15/04/2012, à 16:19
- yggy
Re : Où est passé Grub ? Problème Lubuntu et Jolicloud
Salut, merci pour ta réponse!
En fait, j'ai le menu de Grub au démarrage maintenant, depuis que j'ai installé Ubuntu 10.04.
J'ai plusieurs possibilités pour booter, quand je veux choisir celle de Lubuntu (sur sda1), ça ne boote pas.
Donc, est ce que parce que la version de Grub qui s'est installé avec Ubuntu 10.04 n'est pas assez à jour par rapport à celle que j'avais installé avec Lubuntu 11.10 ?
Est-ce que je fais tes manips malgré le fait que j'ai Grub au démarrage (qui fonctionne, mais que pour Ubuntu et Joli OS)
J'ai conscience du travail qui est fait bénévolement par toute cette communauté, je ne presse pas les choses. Merci d'avance pour tes recherches, fructueuses ou non!
Le compliment diminue l'homme (Guy Roux)
Hors ligne
#8 Le 15/04/2012, à 17:15
- Arbiel
Re : Où est passé Grub ? Problème Lubuntu et Jolicloud
La procédure d'amorçage avec Grub est composée de deux éléments : le programme d'amorçage, Grub lui-même, et le fichier de configuration, grub.cfg.
Grub lui-même est décomposé en deux parties : le programme initial d'amorçage, chargé par le BIOS, localisé dans le premier secteur du périphérique d'amorçage, et auquel le BIOS passe le contrôle. Ce programme initial n'a d'autre rôle que de charger la seconde partie, le programme d'amorçage proprement auquel il passe le contrôle. Cette seconde partie du programme d'amorçage s'appuie sur le fichier de configuration pour préparer le menu, le présenter à l'utilisateur, attendre sa réponse et charger le système choisi par ce dernier.
La procédure d'installation d'Ubuntu réinstalle les deux parties de Grub et enregistre un nouveau fichier grub.cfg. Par défaut, Grub est installé sur le MBR du disque sur lequel on installe le système, et grub.cfg est créé dans la partition système. Dans ton cas, on voit bien que
Boot Info Summary: ===============================
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 6 for /boot/grub.
============================= Boot Info Summary: ===============================
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 4 for /boot/grub.
le fichier grub.cfg utilisé par Grub était d'abord dans /dev/sda6 puis, après installation de la 10.04, est "passé" dans /dev/sda6. En fait, il n'est pas passé du tout de l'un à l'autre. On constate effectivement la présence d'un tel fichier grub.cfg dans tes trois partitions /dev/sda1, /dev/sda4 et /dev/sda6. Mais le seul fichier utilisé par Grub est maintenant celui qui est dans /dev/sda6
Tu indiques que tu n'arrives plus à amorcer ton PC avec Lubuntu de /dev/sda1. Cela demande une analyse complémentaire que je ferai un peu plus tard.
Arbiel
Arbiel Perlacremaz
LDLC Aurore NK3S-8-S4 Ubuntu 20.04
Abandon d'azerty au profit de bépo, de google au profit de Lilo et de la messagerie électronique violable au profit de Protonmail, une messagerie chiffrée de poste de travail à poste de travail.
Hors ligne
#9 Le 15/04/2012, à 18:29
- yggy
Re : Où est passé Grub ? Problème Lubuntu et Jolicloud
C'est bon, c'est réglé! Merci pour ton aide Arbiel.
J'ai crée une live usb avec boot-repair-disk, et cette appli m'a permis de réinstaller grub ou en tout cas, de réparer ce qui n'allait pas. Donc, c'est bon, j'ai testé avec les 3 OS, ça fonctionne, c'est nickel!
à garder sous le coude, cette image boot-repair
Le compliment diminue l'homme (Guy Roux)
Hors ligne