#1 Le 14/02/2007, à 20:23
- david breizh
[résolu]cinergy t2 besoin d'une grosse aide
alors voilà avant j'avais un stick compatible pinnacle hybride compilation v4l etc...
tout marchait impec sauf ma webcam qui refusait de compiler à cause de la version de v4l
donc ni une ni deux j'achète un terratec sinergy t2 (normalement pas de compilation à faire), bon je réinstalle le noyau propre, ensuite petite compil nvidia ok , je lance kaffeine scan auto des chaines (car avec mon fichier xine de l'autre stick me fait freeze xine direct.
là il me trouve des chaine ok, je l'ai charge dans la liste de lecture et là je clic play et là le drame, soit il me marque can't tune dvb ou alors il lit la chaine mais bon la qualité zero comme si il y avait une tempète dehors.
donc si quelqu'un à ce stick sous edgy avec quel kernel (ou options que j'ai du louper quand j'ai compiler un autre pour voir), la commande pour chercher toutes les chaines en auto (sans fichier style fr-brest car là il me trouve rien alors que l'autre si).
je post le scan qui marchait avec l'autre, il doit y avoir un problème quelque part non:
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Brest
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 546000000 0 1 9 1 1 0 0
initial transponder 482000000 0 1 9 1 1 0 0
initial transponder 506000000 0 1 9 1 1 0 0
initial transponder 490000000 0 1 9 1 1 0 0
initial transponder 530000000 0 1 9 1 1 0 0
initial transponder 514000000 0 1 9 1 1 0 0
>>> tune to: 546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.voilà j'espère que quelqu'un va m'aider car là je l'ai un peu mauvaise .
mon kernel et celui de base 2.6.17.11-generic.
je post mon lsmod et mon dmesg mais bon si il le reconnait .
Module Size Used by
ipv6 272288 8
nvidia 6830836 32
agpgart 34888 1 nvidia
binfmt_misc 13448 1
ppdev 10500 0
parport_pc 37796 0
lp 12964 0
parport 39496 3 ppdev,parport_pc,lp
powernow_k8 15008 0
cpufreq_userspace 5408 0
cpufreq_stats 7744 0
freq_table 6048 2 powernow_k8,cpufreq_stats
cpufreq_powersave 2944 0
cpufreq_ondemand 8876 1
cpufreq_conservative 8712 0
video 17540 0
tc1100_wmi 8324 0
sbs 16804 0
sony_acpi 6412 0
pcc_acpi 14080 0
i2c_ec 6272 1 sbs
i2c_core 23424 2 nvidia,i2c_ec
hotkey 11556 0
dev_acpi 12292 0
button 7952 0
battery 11652 0
container 5632 0
ac 6788 0
asus_acpi 17688 0
af_packet 24584 2
snd_fm801 22048 1
snd_ac97_codec 97696 1 snd_fm801
snd_ac97_bus 3456 1 snd_ac97_codec
snd_pcm_oss 47360 0
snd_mixer_oss 19584 1 snd_pcm_oss
snd_pcm 84612 3 snd_fm801,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 11400 1 snd_pcm
snd_tea575x_tuner 5248 1 snd_fm801
cinergyT2 17668 0
videodev 10752 1 snd_tea575x_tuner
usblp 15488 0
dvb_core 83368 1 cinergyT2
snd_opl3_lib 12288 1 snd_fm801
snd_timer 25348 2 snd_pcm,snd_opl3_lib
snd_hwdep 10756 1 snd_opl3_lib
snd_mpu401_uart 10240 1 snd_fm801
snd_rawmidi 27264 1 snd_mpu401_uart
snd_seq_device 9868 2 snd_opl3_lib,snd_rawmidi
tsdev 9152 0
snd 58372 13 snd_fm801,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
sg 37404 0
soundcore 11232 1 snd
shpchp 42144 0
pci_hotplug 32828 1 shpchp
fm801_gp 5120 0
gameport 17160 2 fm801_gp
evdev 11392 2
psmouse 41352 0
serio_raw 8452 0
pcspkr 4352 0
ext3 142856 2
jbd 62228 1 ext3
forcedeth 32268 0
ohci1394 37040 0
ieee1394 306104 1 ohci1394
ehci_hcd 34696 0
ohci_hcd 22532 0
usbcore 134912 5 cinergyT2,usblp,ehci_hcd,ohci_hcd
ide_generic 2432 0
ide_cd 33696 0
cdrom 38944 1 ide_cd
generic 6276 0
sd_mod 22656 4
amd74xx 15260 0 [permanent]
sata_nv 11268 3
libata 74892 1 sata_nv
scsi_mod 144648 3 sg,sd_mod,libata
thermal 15624 0
processor 31560 2 powernow_k8,thermal
fan 6020 0
fbcon 41504 0
tileblit 3840 1 fbcon
font 9344 1 fbcon
bitblit 7168 1 fbcon
softcursor 3328 1 bitblit
vesafb 9244 0
capability 5896 0
commoncap 8704 1 capability[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[17179569.184000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[17179569.184000] 126MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f5ab0
[17179569.184000] On node 0 totalpages: 261872
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32496 pages, LIFO batch:7
[17179569.184000] DMI 2.4 present.
[17179569.184000] ACPI: RSDP (v002 Nvidia ) @ 0x000f7570
[17179569.184000] ACPI: XSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef30c0
[17179569.184000] ACPI: FADT (v003 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefb480
[17179569.184000] ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x3fefb680
[17179569.184000] ACPI: MCFG (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefb880
[17179569.184000] ACPI: MADT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3fefb5c0
[17179569.184000] ACPI: DSDT (v001 NVIDIA ASUSACPI 0x00001000 MSFT 0x03000000) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:15 APIC version 16
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro quiet splash locale=fr_FR
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2210.389 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.236000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.236000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.252000] Memory: 1028364k/1047488k available (1911k kernel code, 18432k reserved, 1073k data, 308k init, 129984k highmem)
[17179569.252000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.336000] Calibrating delay using timer specific routine.. 4427.10 BogoMIPS (lpj=8854203)
[17179569.336000] Security Framework v1.0.0 initialized
[17179569.336000] SELinux: Disabled at boot.
[17179569.336000] Mount-cache hash table entries: 512
[17179569.336000] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d
[17179569.336000] CPU: After vendor identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d
[17179569.336000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.336000] CPU: L2 Cache: 512K (64 bytes/line)
[17179569.336000] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001d
[17179569.336000] Checking 'hlt' instruction... OK.
[17179569.352000] SMP alternatives: switching to UP code
[17179569.352000] Freeing SMP alternatives: 16k freed
[17179569.352000] checking if image is initramfs... it is
[17179569.748000] Freeing initrd memory: 5652k freed
[17179569.748000] ACPI: Core revision 20060707
[17179569.752000] ACPI: Looking for DSDT ... not found!
[17179569.756000] ACPI: System reset via FADT Reset Register is supported
[17179569.756000] machine_reset = acpi_machine_reset
[17179569.756000] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
[17179569.756000] Total of 1 processors activated (4427.10 BogoMIPS).
[17179569.756000] ENABLING IO-APIC IRQs
[17179569.756000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179569.904000] Brought up 1 CPUs
[17179569.904000] migration_cost=0
[17179569.904000] NET: Registered protocol family 16
[17179569.904000] EISA bus registered
[17179569.904000] ACPI: bus type pci registered
[17179569.904000] PCI: Using MMCONFIG
[17179569.904000] PCI: No mmconfig possible on 0:18
[17179569.904000] Setting up standard PCI resources
[17179569.912000] ACPI: Interpreter enabled
[17179569.912000] ACPI: Using IOAPIC for interrupt routing
[17179569.912000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179569.912000] PCI: Probing PCI hardware (bus 00)
[17179569.920000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0d.0
[17179569.920000] Boot video device is 0000:03:00.0
[17179569.920000] PCI: Transparent bridge - 0000:00:10.0
[17179569.920000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179569.988000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179569.992000] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.992000] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 *7 9 10 11 14 15)
[17179569.992000] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.992000] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.992000] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
[17179569.992000] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.992000] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.992000] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.996000] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.996000] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.996000] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[17179569.996000] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.996000] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.996000] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.996000] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.996000] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.996000] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.996000] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179569.996000] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[17179569.996000] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[17179570.000000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[17179570.000000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[17179570.000000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[17179570.000000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[17179570.000000] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[17179570.000000] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[17179570.000000] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[17179570.000000] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[17179570.000000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[17179570.000000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[17179570.004000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[17179570.004000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[17179570.004000] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[17179570.004000] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[17179570.004000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[17179570.004000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[17179570.004000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[17179570.004000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[17179570.004000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[17179570.004000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[17179570.004000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[17179570.008000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.008000] pnp: PnP ACPI init
[17179570.012000] pnp: PnP ACPI: found 11 devices
[17179570.012000] PnPBIOS: Disabled by ACPI PNP
[17179570.012000] PCI: Using ACPI for IRQ routing
[17179570.012000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.012000] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[17179570.012000] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
[17179570.012000] pnp: 00:01: ioport range 0x4400-0x447f has been reserved
[17179570.012000] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
[17179570.012000] pnp: 00:01: ioport range 0x4800-0x487f has been reserved
[17179570.012000] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
[17179570.012000] pnp: 00:01: ioport range 0x2000-0x207f has been reserved
[17179570.012000] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
[17179570.012000] PCI: Bridge: 0000:00:02.0
[17179570.012000] IO window: c000-cfff
[17179570.012000] MEM window: fd900000-fd9fffff
[17179570.012000] PREFETCH window: fde00000-fdefffff
[17179570.012000] PCI: Bridge: 0000:00:03.0
[17179570.012000] IO window: b000-bfff
[17179570.012000] MEM window: fdd00000-fddfffff
[17179570.012000] PREFETCH window: fdc00000-fdcfffff
[17179570.012000] PCI: Bridge: 0000:00:04.0
[17179570.012000] IO window: 9000-9fff
[17179570.012000] MEM window: fa000000-fcffffff
[17179570.012000] PREFETCH window: d0000000-dfffffff
[17179570.012000] PCI: Bridge: 0000:00:10.0
[17179570.012000] IO window: a000-afff
[17179570.012000] MEM window: fdb00000-fdbfffff
[17179570.012000] PREFETCH window: fda00000-fdafffff
[17179570.012000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179570.012000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[17179570.012000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179570.012000] PCI: Setting latency timer of device 0000:00:10.0 to 64
[17179570.012000] NET: Registered protocol family 2
[17179570.052000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.052000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179570.052000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179570.052000] TCP: Hash tables configured (established 131072 bind 65536)
[17179570.052000] TCP reno registered
[17179570.052000] audit: initializing netlink socket (disabled)
[17179570.052000] audit(1171476431.052:1): initialized
[17179570.052000] highmem bounce pool size: 64 pages
[17179570.052000] VFS: Disk quotas dquot_6.5.1
[17179570.052000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.052000] Initializing Cryptographic API
[17179570.052000] io scheduler noop registered
[17179570.052000] io scheduler anticipatory registered
[17179570.052000] io scheduler deadline registered
[17179570.052000] io scheduler cfq registered (default)
[17179570.052000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179570.052000] pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
[17179570.052000] assign_interrupt_mode Found MSI capability
[17179570.052000] Allocate Port Service[0000:00:02.0:pcie00]
[17179570.052000] Allocate Port Service[0000:00:02.0:pcie03]
[17179570.052000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[17179570.052000] pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
[17179570.052000] assign_interrupt_mode Found MSI capability
[17179570.052000] Allocate Port Service[0000:00:03.0:pcie00]
[17179570.052000] Allocate Port Service[0000:00:03.0:pcie03]
[17179570.052000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179570.052000] pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
[17179570.052000] assign_interrupt_mode Found MSI capability
[17179570.052000] Allocate Port Service[0000:00:04.0:pcie00]
[17179570.052000] Allocate Port Service[0000:00:04.0:pcie03]
[17179570.052000] isapnp: Scanning for PnP cards...
[17179570.404000] isapnp: No Plug & Play device found
[17179570.420000] Real Time Clock Driver v1.12ac
[17179570.420000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179570.424000] mice: PS/2 mouse device common for all mice
[17179570.424000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.424000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.424000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.424000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179570.968000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.968000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.976000] EISA: Probing bus 0 at eisa.0
[17179570.976000] Cannot allocate resource for EISA slot 2
[17179570.976000] Cannot allocate resource for EISA slot 4
[17179570.976000] EISA: Detected 0 cards.
[17179570.976000] TCP bic registered
[17179570.976000] NET: Registered protocol family 1
[17179570.976000] NET: Registered protocol family 8
[17179570.976000] NET: Registered protocol family 20
[17179570.976000] Using IPI No-Shortcut mode
[17179570.976000] ACPI: (supports S0 S1 S3 S4 S5)
[17179570.980000] Freeing unused kernel memory: 308k freed
[17179571.000000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.124000] Capability LSM initialized
[17179572.152000] ACPI: Fan [FAN] (on)
[17179572.152000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179572.152000] ACPI: Getting cpuindex for acpiid 0x1
[17179572.152000] ACPI: Thermal Zone [THRM] (40 C)
[17179572.496000] SCSI subsystem initialized
[17179572.496000] libata version 1.20 loaded.
[17179572.500000] sata_nv 0000:00:0e.0: version 0.8
[17179572.500000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[17179572.500000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 209
[17179572.500000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[17179572.500000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 209
[17179572.500000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 209
[17179572.704000] ata1: SATA link up 3.0 Gbps (SStatus 123)
[17179572.876000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f69 84:4773 85:7c68 86:3e01 87:4763 88:407f
[17179572.876000] ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
[17179572.888000] ata1: dev 0 configured for UDMA/133
[17179572.888000] scsi0 : sata_nv
[17179573.092000] ata2: SATA link down (SStatus 0)
[17179573.092000] scsi1 : sata_nv
[17179573.096000] Vendor: ATA Model: Maxtor 6G160E0 Rev: KA10
[17179573.096000] Type: Direct-Access ANSI SCSI revision: 05
[17179573.096000] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[17179573.096000] NFORCE-MCP51: chipset revision 161
[17179573.096000] NFORCE-MCP51: not 100% native mode: will probe irqs later
[17179573.096000] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
[17179573.096000] ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA
[17179573.096000] Probing IDE interface ide0...
[17179573.112000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[17179573.112000] sda: Write Protect is off
[17179573.112000] sda: Mode Sense: 00 3a 00 00
[17179573.112000] SCSI device sda: drive cache: write back
[17179573.112000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[17179573.112000] sda: Write Protect is off
[17179573.112000] sda: Mode Sense: 00 3a 00 00
[17179573.112000] SCSI device sda: drive cache: write back
[17179573.112000] sda: sda1 sda2 sda3
[17179573.152000] sd 0:0:0:0: Attached scsi disk sda
[17179573.840000] hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
[17179574.184000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.196000] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179574.196000] Uniform CD-ROM driver Revision: 3.20
[17179574.296000] Probing IDE interface ide1...
[17179574.324000] usbcore: registered new driver usbfs
[17179574.324000] usbcore: registered new driver hub
[17179574.324000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179574.324000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[17179574.324000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 217
[17179574.324000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[17179574.324000] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[17179574.324000] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[17179574.364000] ohci_hcd 0000:00:0b.0: irq 217, io mem 0xfe02f000
[17179574.384000] ieee1394: Initialized config rom entry `ip1394'
[17179574.396000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179574.424000] usb usb1: configuration #1 chosen from 1 choice
[17179574.424000] hub 1-0:1.0: USB hub found
[17179574.424000] hub 1-0:1.0: 8 ports detected
[17179574.540000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[17179574.540000] ACPI: PCI Interrupt 0000:00:0b.1[b] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 225
[17179574.540000] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[17179574.540000] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[17179574.540000] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[17179574.540000] ehci_hcd 0000:00:0b.1: debug port 1
[17179574.540000] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[17179574.540000] ehci_hcd 0000:00:0b.1: irq 225, io mem 0xfe02e000
[17179574.540000] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179574.540000] usb usb2: configuration #1 chosen from 1 choice
[17179574.540000] hub 2-0:1.0: USB hub found
[17179574.540000] hub 2-0:1.0: 8 ports detected
[17179574.648000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[17179574.648000] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 233
[17179574.648000] PCI: Setting latency timer of device 0000:00:14.0 to 64
[17179574.648000] forcedeth: using HIGHDMA
[17179575.172000] eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0
[17179575.172000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179575.172000] ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 50
[17179575.220000] usb 2-1: new high speed USB device using ehci_hcd and address 2
[17179575.224000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50] MMIO=[fdbff000-fdbff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[17179575.288000] Attempting manual resume
[17179575.312000] kjournald starting. Commit interval 5 seconds
[17179575.312000] EXT3-fs: mounted filesystem with ordered data mode.
[17179575.364000] usb 2-1: configuration #1 chosen from 1 choice
[17179575.732000] ohci_hcd 0000:00:0b.0: wakeup
[17179576.116000] usb 1-2: new full speed USB device using ohci_hcd and address 2
[17179576.336000] usb 1-2: configuration #1 chosen from 1 choice
[17179576.500000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000c28162]
[17179576.640000] usb 1-3: new full speed USB device using ohci_hcd and address 3
[17179576.848000] usb 1-3: configuration #1 chosen from 1 choice
[17179582.768000] input: PC Speaker as /class/input/input1
[17179583.188000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179583.192000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179583.320000] gameport: FM801 is pci0000:04:09.1/gameport0, io 0xa800, speed 1169kHz
[17179583.456000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179583.496000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179583.684000] ts: Compaq touchscreen protocol output
[17179583.820000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7504
[17179583.820000] usbcore: registered new driver usblp
[17179583.820000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179583.832000] Linux video capture interface: v1.00
[17179583.856000] DVB: registering new adapter (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver).
[17179583.856000] input: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver remote control as /class/input/input3
[17179583.856000] usbcore: registered new driver cinergyT2
[17179584.076000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[17179584.076000] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 58
[17179584.140000] NET: Registered protocol family 17
[17179584.584000] EXT3 FS on sda1, internal journal
[17179584.892000] kjournald starting. Commit interval 5 seconds
[17179584.900000] EXT3 FS on sda3, internal journal
[17179584.900000] EXT3-fs: mounted filesystem with ordered data mode.
[17179585.804000] ACPI: Power Button (FF) [PWRF]
[17179585.804000] ACPI: Power Button (CM) [PWRB]
[17179585.920000] ibm_acpi: ec object not found
[17179585.956000] pcc_acpi: loading...
[17179586.236000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[17179586.236000] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6 (1400 mV)
[17179586.236000] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8 (1350 mV)
[17179586.236000] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
[17179586.236000] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[17179586.236000] cpu_init done, current fid 0xe, vid 0x6
[17179587.796000] lp: driver loaded but no devices found
[17179587.900000] ppdev: user-space parallel port driver
[17179691.076000] Linux agpgart interface v0.101 (c) Dave Jones
[17179691.124000] nvidia: module license 'NVIDIA' taints kernel.
[17179691.380000] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[17179691.380000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 66
[17179691.380000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[17179691.380000] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9746 Fri Dec 15 09:54:45 PST 2006
[17179727.272000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 66
[17179727.276000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[17179727.276000] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9746 Fri Dec 15 09:54:45 PST 2006
[17179740.928000] NET: Registered protocol family 10
[17179740.928000] lo: Disabled Privacy Extensions
[17179740.932000] IPv6 over IPv4 tunneling driver
[17179751.868000] eth0: no IPv6 routers presenten fait oui j'ai changer avec une autre antenne amplifiée et c'est beaucoup mieux.
Dernière modification par david breizh (Le 15/02/2007, à 00:46)
ah ! du fin fond de la bretagne grâce au libre on se sent moins seul!
Vive le libre et toutes les distributions qui m'ont fait découvrir le monde de linux!
Hors ligne
#2 Le 14/02/2007, à 20:59
- Black
Re : [résolu]cinergy t2 besoin d'une grosse aide
ton probleme ne veint pas d'ubuntu !!!
en efft la cinegy t2 de gros problemes de reception, et meme avec un amplificateur, certaines personnes qui captent tres bien avec d'autres stick recoivent mal 
tu peut essayer d'amplifier le signal, mais sinon il faudra se rabattre sur d'autre stick :ok:
#3 Le 14/02/2007, à 21:10
- david breizh
Re : [résolu]cinergy t2 besoin d'une grosse aide
oh et bien c'est la galère alors car je l'avit acheter exprès pour ne pas compiler v4l, la merde quoi! c'est chien car je viens tout juste de la recevoir tout à l'heure.
ah ! du fin fond de la bretagne grâce au libre on se sent moins seul!
Vive le libre et toutes les distributions qui m'ont fait découvrir le monde de linux!
Hors ligne
#4 Le 24/04/2007, à 22:15
- m3ta-x
Re : [résolu]cinergy t2 besoin d'une grosse aide
non non, le probleme vient bien de kaffeine car chez moi ca fait pareil avec une win nova t stick (can't tune dvd chez moi, sinon reception nickel)...
D'ailleur si quelqu'un a la solution...
Hors ligne
#5 Le 25/04/2007, à 06:49
- david breizh
Re : [résolu]cinergy t2 besoin d'une grosse aide
en fait c'est un décalage de 157 et sous feisty nickel
ah ! du fin fond de la bretagne grâce au libre on se sent moins seul!
Vive le libre et toutes les distributions qui m'ont fait découvrir le monde de linux!
Hors ligne
#6 Le 25/04/2007, à 17:32
- m3ta-x
Re : [résolu]cinergy t2 besoin d'une grosse aide
je peux pas passer a feisty ca me fait peter mes drivers, ca m'en fout des merdiques a la place... 
Hors ligne
#7 Le 25/04/2007, à 19:27
- david breizh
Re : [résolu]cinergy t2 besoin d'une grosse aide
si tu es sous edgy il faut editer le fichier de ta région et de rajouter 157000 à chaques fréquences des canaux .
ah ! du fin fond de la bretagne grâce au libre on se sent moins seul!
Vive le libre et toutes les distributions qui m'ont fait découvrir le monde de linux!
Hors ligne
#8 Le 25/04/2007, à 21:47
- m3ta-x
Re : [résolu]cinergy t2 besoin d'une grosse aide
et heu... excuse ma question un peu bete, mais... oukilé ce fichier de config? ^^
Hors ligne
#9 Le 26/04/2007, à 08:30
- david breizh
Re : [résolu]cinergy t2 besoin d'une grosse aide
en fait il y a deux choix suivant le logiciel kaffeine dans sa dernière version si tu ne met rien comme région tu auras trois cases en plus avec +157 -157 et 0 il me semble , sinon pour xine et autres le fichier doit se trouver dans/usr/share/doc/dvb-utils/examples/scan/dvb-t/le_fichier_qui_t'intéresse hein tu le copie dans ton home et tu tapes sudo gedit le_fichier_qui_t'intéresse dans un terminal (bien sur là où tu la copié) .
et tu rajoutes +157000 à chaque canaux , tu enregistres et tu tapes sudo scan le_fichier_qui_t'intéresse et une fois tes chaines trouvées tu le copies dans le répertoire de xine mplayer et roule ma poule.
voilà si tu ni arrives pas poste tes erreurs j'essaierai de t'aider.
ah ! du fin fond de la bretagne grâce au libre on se sent moins seul!
Vive le libre et toutes les distributions qui m'ont fait découvrir le monde de linux!
Hors ligne
#10 Le 26/04/2007, à 20:00
- m3ta-x
Re : [résolu]cinergy t2 besoin d'une grosse aide
ben en fait la je suis sous feisty, et le probleme continue... est-ce que tu es sur que c'est le même probleme?
merci
edit; dans les reglages pour scanner les chaines il y a "offset (khz) 0, + 167, - 167"
Est-ce que je devrais scanner avec +167 ? (la c'est 0 qui est coché)
Dernière modification par m3ta-x (Le 26/04/2007, à 20:19)
Hors ligne
#11 Le 27/04/2007, à 07:58
- david breizh
Re : [résolu]cinergy t2 besoin d'une grosse aide
oui il faut cocher +167 et scanner sinon c'est ça viens de ton antenne .
ah ! du fin fond de la bretagne grâce au libre on se sent moins seul!
Vive le libre et toutes les distributions qui m'ont fait découvrir le monde de linux!
Hors ligne
#12 Le 27/04/2007, à 18:32
- m3ta-x
Re : [résolu]cinergy t2 besoin d'une grosse aide
ben c'est certain que ca vient d'un probleme logiciel parce que sous windows ca le fait pas.
en cochant + 167, tout ce que ca a changé c'est que ca me trouvais autant de chaine, mais ca me les mettait 2 fois ^^
Hors ligne