Ubuntu-fr

arak

[résolu]defauts disques durs

salut

je viens de reinstaller feisty et maintenant je vois sur le bureau l icone de mon deuxieme disk dur hdb1
chose que les premieres install il ne faisait pas

1   il fait 200go en ext 3 mais je n arrive pas a deposé de fichiers dessus et le lost + found est inaccessible

2   mon premier disque dur est quatre partition dont une en fat 32 j ai suivi le tuto
http://doc.ubuntu-fr.org/post_installation

pour mettre umask=000 mais je n arrive pas a editer le  /etc/fstab

voici le mien

/etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# /dev/hda1
UUID=0f0ead2b-a1d0-4440-b3c4-07b5281a6fc1 /               ext3    defaults,errors=remount-ro 0       1
# /dev/hda3
UUID=da2a0e1f-f344-431e-b8c0-55d54666f3e7 /home           ext3    defaults        0       2
# /dev/hdb1
UUID=115a9505-5e65-44d9-a9db-e73fa6e62a72 /media/hdb1     ext3    defaults        0       2
# /dev/hda4
UUID=179D-6C04  /partage        vfat    defaults,utf8,umask=007,gid=46 0       1
# /dev/hda2
UUID=072a52ce-6960-4789-8e49-166c853def03 none            swap    sw              0       0
/dev/hdd        /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/hdc        /media/cdrom1   udf,iso9660 user,noauto     0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0
~                                                                               
~                                                                               
"/etc/fstab" 17 lines, 911 characters

merci de vos conseils

a+

Dernière modification par arak (Le 28/04/2007, à 19:38)

arak

Re : [résolu]defauts disques durs

peut etre que sous feisty il n y aplus besoin de la manip car j ai reussi a deposé des fichiers
sur la partie en fat 32

reste mon probleme avec le deuxieme disque

arak

Re : [résolu]defauts disques durs

up 

tomlohave

Re : [résolu]defauts disques durs

Quels sont les droits sur cette partition ?

essaie :

cd /media
ls -al

et poste le résultat de cette commande.

arak

Re : [résolu]defauts disques durs

j ai eu ça

arak@arak-desktop:~$ cd /media
arak@arak-desktop:/media$ ls -al
total 24
drwxr-xr-x  6 root root 4096 2007-04-15 13:56 .
drwxr-xr-x 22 root root 4096 2007-04-26 19:12 ..
lrwxrwxrwx  1 root root    6 2007-04-26 19:01 cdrom -> cdrom0
drwxr-xr-x  2 root root 4096 2007-04-26 19:01 cdrom0
drwxr-xr-x  2 root root 4096 2007-04-26 19:01 cdrom1
lrwxrwxrwx  1 root root    7 2007-04-26 19:01 floppy -> floppy0
drwxr-xr-x  2 root root 4096 2007-04-26 19:01 floppy0
--wxr-x---  1 root root    0 2007-04-15 13:56 .hal-mtab-lock
drwxr-xr-x  3 root root 4096 2007-04-26 19:00 hdb1

qu est ce que t en pense ,moi pas comprendre là

a+ tomlohave

tomlohave

Re : [résolu]defauts disques durs

drwxr-xr-x  3 root root 4096 2007-04-26 19:00 hdb1

Si je me souviens bien : de gauche à droite :

d : directory
r le propriétaire peult lire (read)
w le propriétaire peut écrire (write)
x le propriétaire peut lancer des binaires

r les membres du groupe root peuvent lire
- pas de droit en ecriture
x                       et  executer des fichiers binaires

x
-
r   les autres peuvent lire et exécuter

si tu es le seul sur cette machine à utiliser cette partition, tu peux faire :

cd /media
sudo chown - R arak:arak hdb1

par cette commande, tu deviendras le propriétaire du répertoire hdb1 (donc lecture + écriture dans ce rep)

arak

Re : [résolu]defauts disques durs

merci pour ton explication c est tout de suite plus parlant

j ai essayer ta commande dans la console mais et oui toujours des mais

arak@arak-desktop:~$ cd /media
arak@arak-desktop:/media$ sudo chown - R arak:arak hdb1
Password:
chown: `-': usager invalide
arak@arak-desktop:/media$

a+

Dernière modification par arak (Le 27/04/2007, à 19:06)

tomlohave

Re : [résolu]defauts disques durs

correction : un espace de trop :

cd /media
sudo chown -R arak:arak hdb1

arak

Re : [résolu]defauts disques durs

m...de

je viens de reinstaller win et je vais tenter le dual boot

je vien de relancer ubuntu et la il me retrouve plus mon discque 200go en esclave

arak

Re : [résolu]defauts disques durs

si

vive gparted 

arak

Re : [résolu]defauts disques durs

c est pas vrai mon deuxieme disk il ne veut pas le voir

c est un ide 200go en fat 32

gparted le voit plus

si je fais ça:

arak@arak-desktop:~$ cd /media
arak@arak-desktop:/media$ ls -al

la réponse:

total 60
drwxr-xr-x  8 root root     4096 2007-04-28 02:16 .
drwxr-xr-x 21 root root     4096 2007-04-28 00:29 ..
lrwxrwxrwx  1 root root        6 2007-04-27 23:59 cdrom -> cdrom0
drwxr-xr-x  2 root root     4096 2007-04-27 23:59 cdrom0
drwxr-xr-x  2 root root     4096 2007-04-27 23:59 cdrom1
drwx------  2 arak root    16384 1970-01-01 01:00 disk
lrwxrwxrwx  1 root root        7 2007-04-27 23:59 floppy -> floppy0
drwxr-xr-x  2 root root     4096 2007-04-27 23:59 floppy0
-rw-r--r--  1 root root      202 2007-04-28 02:16 .hal-mtab
--wxr-x---  1 root root        0 2007-04-15 13:56 .hal-mtab-lock
dr-xr-x---  1 root plugdev  4096 2007-04-28 00:00 hda1
drwx------  5 arak root    16384 1970-01-01 01:00 SEED MEMORY
arak@arak-desktop:/media$

il ne voit pas hdb1?

a plus tard
arak

arak

Re : [résolu]defauts disques durs

et si je fais ça

il est necessaire que je monte mon dd

Pour monter un périphérique de stockage, on utilise la commande mount qui doit s'accompagner de la désignation de votre lecteur et, éventuellement, des paramètres à lui appliquer.

Pour monter notre disque /dev/hdb1 dans /media/backup

mount /dev/hdb1 /media/backup

Cette commande monte votre disque en détectant automatiquement le type du système de fichier, dans certain cas, Linux sera incapable de le choisir automatiquement, il faudra donc indiquer à la commande mount le type de fichier :

mount -t ext3 /dev/hdb1 /media/backup

Vous pouvez aussi ajouter des options comme, par exemple, des droits d'accés :

mount -t ext3 -o mode=0755 /dev/hdb1 /media/backup

Pour aller plus loin dans les arcanes de la commande mount je vous invite grandement à consulter le manuel qui lui est associée (man mount)

merci de vos conseils

tomlohave

Re : [résolu]defauts disques durs

tu peux poster le resultat de la commande

dmesg ?

arak

Re : [résolu]defauts disques durs

bonjour tomlohave

voici le resultat de la commande dmesg   cé un peu long

mais je crois que c est ça que tu veux voir

      ([   35.125437] hdb: WDC WD2000JB-00GVA0, ATA DISK drive
        [   35.185943] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
            35.214447] Probing IDE interface ide1...   )

[    0.000000] 0MB HIGHMEM available.
[    0.000000] 767MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   196592
[    0.000000]   HighMem    196592 ->   196592
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   196592
[    0.000000] On node 0 totalpages: 196592
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1503 pages used for memmap
[    0.000000]   Normal zone: 190993 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP (v000 Nvidia                                ) @ 0x000f75e0
[    0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000
[    0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040
[    0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff74c0
[    0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:10 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[    0.000000] Detected 1913.214 MHz processor.
[   29.619459] Built 1 zonelists.  Total pages: 195057
[   29.619463] Kernel command line: root=UUID=886d5499-8691-40ee-9f22-053e4a9d6ecc ro quiet splash locale=fr_FR
[   29.619637] mapped APIC to ffffd000 (fee00000)
[   29.619639] mapped IOAPIC to ffffc000 (fec00000)
[   29.619643] Enabling fast FPU save and restore... done.
[   29.619645] Enabling unmasked SIMD FPU exception support... done.
[   29.619655] Initializing CPU#0
[   29.619717] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   29.621028] Console: colour VGA+ 80x25
[   29.621629] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   29.622145] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   29.640458] Memory: 768064k/786368k available (1992k kernel code, 17644k reserved, 893k data, 328k init, 0k highmem)
[   29.640468] virtual kernel memory layout:
[   29.640469]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   29.640470]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   29.640472]     vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
[   29.640473]     lowmem  : 0xc0000000 - 0xefff0000   ( 767 MB)
[   29.640474]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
[   29.640476]       .data : 0xc02f2264 - 0xc03d16d4   ( 893 kB)
[   29.640477]       .text : 0xc0100000 - 0xc02f2264   (1992 kB)
[   29.640480] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   29.719683] Calibrating delay using timer specific routine.. 3829.44 BogoMIPS (lpj=7658884)
[   29.719728] Security Framework v1.0.0 initialized
[   29.719735] SELinux:  Disabled at boot.
[   29.719753] Mount-cache hash table entries: 512
[   29.719900] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[   29.719909] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   29.719912] CPU: L2 Cache: 512K (64 bytes/line)
[   29.719915] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[   29.719925] Compat vDSO mapped to ffffe000.
[   29.719931] Remapping vsyscall page to ffffe000
[   29.719940] Checking 'hlt' instruction... OK.
[   29.735797] SMP alternatives: switching to UP code
[   29.736024] Freeing SMP alternatives: 11k freed
[   29.736245] Early unpacking initramfs... done
[   30.054912] ACPI: Core revision 20060707
[   30.061857] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   30.064856] CPU0: AMD Athlon(tm) XP 2600+ stepping 00
[   30.064878] Total of 1 processors activated (3829.44 BogoMIPS).
[   30.065075] ENABLING IO-APIC IRQs
[   30.065268] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[   30.211548] Brought up 1 CPUs
[   30.211804] Booting paravirtualized kernel on bare hardware
[   30.211878] Time:  4:01:47  Date: 03/28/107
[   30.211913] NET: Registered protocol family 16
[   30.212016] EISA bus registered
[   30.212021] ACPI: bus type pci registered
[   30.244023] PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=3
[   30.244026] PCI: Using configuration type 1
[   30.244028] Setting up standard PCI resources
[   30.257659] ACPI: Interpreter enabled
[   30.257662] ACPI: Using IOAPIC for interrupt routing
[   30.258268] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   30.258273] PCI: Probing PCI hardware (bus 00)
[   30.258543] PCI: nForce2 C1 Halt Disconnect fixup
[   30.259505] Boot video device is 0000:03:00.0
[   30.259601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   30.326210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   30.326763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[   30.326986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT]
[   30.327947] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   30.328254] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   30.328559] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   30.328865] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   30.329169] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   30.329473] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   30.329778] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   30.330084] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[   30.330395] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[   30.330701] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   30.331009] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   30.331316] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   30.331627] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[   30.331932] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   30.332233] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   30.332543] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   30.332826] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[   30.333095] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[   30.333363] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[   30.333632] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[   30.333909] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[   30.334264] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[   30.334621] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[   30.334982] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[   30.335334] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[   30.335696] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[   30.336050] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[   30.336332] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[   30.336684] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[   30.337038] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[   30.337389] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[   30.337744] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[   30.341319] Linux Plug and Play Support v0.97 (c) Adam Belay
[   30.341332] pnp: PnP ACPI init
[   30.347620] pnp: PnP ACPI: found 16 devices
[   30.347624] PnPBIOS: Disabled by ACPI PNP
[   30.347685] PCI: Using ACPI for IRQ routing
[   30.347691] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   30.417364] NET: Registered protocol family 8
[   30.417366] NET: Registered protocol family 20
[   30.418028] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[   30.418031] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[   30.418034] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[   30.418037] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[   30.418040] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[   30.418043] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[   30.418048] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[   30.418051] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[   30.418349] PCI: Bridge: 0000:00:08.0
[   30.418351]   IO window: disabled.
[   30.418356]   MEM window: disabled.
[   30.418360]   PREFETCH window: d8000000-d8ffffff
[   30.418365] PCI: Bridge: 0000:00:0c.0
[   30.418368]   IO window: 9000-9fff
[   30.418372]   MEM window: d4000000-d5ffffff
[   30.418376]   PREFETCH window: 40000000-400fffff
[   30.418382] PCI: Bridge: 0000:00:1e.0
[   30.418384]   IO window: a000-afff
[   30.418388]   MEM window: d6000000-d7ffffff
[   30.418392]   PREFETCH window: b0000000-cfffffff
[   30.418404] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   30.418411] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   30.418445] NET: Registered protocol family 2
[   30.455489] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   30.455709] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   30.457087] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   30.457774] TCP: Hash tables configured (established 131072 bind 65536)
[   30.457777] TCP reno registered
[   30.467541] checking if image is initramfs... it is
[   31.074610] Freeing initrd memory: 7005k freed
[   31.075151] audit: initializing netlink socket (disabled)
[   31.075171] audit(1177732907.540:1): initialized
[   31.075285] VFS: Disk quotas dquot_6.5.1
[   31.075304] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   31.075356] io scheduler noop registered
[   31.075359] io scheduler anticipatory registered
[   31.075361] io scheduler deadline registered
[   31.075369] io scheduler cfq registered (default)
[   31.075680] isapnp: Scanning for PnP cards...
[   31.430023] isapnp: No Plug & Play device found
[   31.457058] Real Time Clock Driver v1.12ac
[   31.457122] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   31.457260] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   31.457426] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   31.458008] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   31.458258] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   31.458511] mice: PS/2 mouse device common for all mice
[   31.459262] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   31.459544] input: Macintosh mouse button emulation as /class/input/input0
[   31.459581] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   31.459585] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   31.459812] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   31.459815] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   31.715224] serio: i8042 KBD port at 0x60,0x64 irq 1
[   31.715384] EISA: Probing bus 0 at eisa.0
[   31.715410] Cannot allocate resource for EISA slot 4
[   31.715413] Cannot allocate resource for EISA slot 5
[   31.715432] EISA: Detected 0 cards.
[   31.745515] TCP cubic registered
[   31.745522] NET: Registered protocol family 1
[   31.745545] Using IPI No-Shortcut mode
[   31.745608] ACPI: (supports S0 S1 S4 S5)
[   31.745662]   Magic number: 3:474:10
[   31.746215] Freeing unused kernel memory: 328k freed
[   31.746919] Time: tsc clocksource has been installed.
[   31.764286] input: AT Translated Set 2 keyboard as /class/input/input1
[   32.980492] Capability LSM initialized
[   33.541068] usbcore: registered new interface driver usbfs
[   33.541095] usbcore: registered new interface driver hub
[   33.541124] usbcore: registered new device driver usb
[   33.541834] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   33.542280] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[   33.542290] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
[   33.542305] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   33.542309] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   33.542489] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[   33.542510] ohci_hcd 0000:00:02.0: irq 16, io mem 0xd9087000
[   33.578148] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[   33.602597] SCSI subsystem initialized
[   33.607739] libata version 2.20 loaded.
[   33.644276] usb usb1: configuration #1 chosen from 1 choice
[   33.644310] hub 1-0:1.0: USB hub found
[   33.644323] hub 1-0:1.0: 3 ports detected
[   33.654194] ieee1394: Initialized config rom entry `ip1394'
[   33.750553] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[   33.750564] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
[   33.750583] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   33.750586] ohci_hcd 0000:00:02.1: OHCI Host Controller
[   33.750617] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[   33.750637] ohci_hcd 0000:00:02.1: irq 17, io mem 0xd9082000
[   33.789250] Floppy drive(s): fd0 is 1.44M
[   33.812047] usb usb2: configuration #1 chosen from 1 choice
[   33.812083] hub 2-0:1.0: USB hub found
[   33.812097] hub 2-0:1.0: 3 ports detected
[   33.853249] FDC 0 is a post-1991 82077
[   33.918475] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[   33.918486] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
[   33.918499] PCI: Setting latency timer of device 0000:00:02.2 to 64
[   33.918503] ehci_hcd 0000:00:02.2: EHCI Host Controller
[   33.918532] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[   33.918570] ehci_hcd 0000:00:02.2: debug port 1
[   33.918575] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[   33.918587] ehci_hcd 0000:00:02.2: irq 18, io mem 0xd9083000
[   33.918595] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   33.918676] usb usb3: configuration #1 chosen from 1 choice
[   33.918712] hub 3-0:1.0: USB hub found
[   33.918722] hub 3-0:1.0: 6 ports detected
[   34.026456] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[   34.026462] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
[   34.026469] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   34.549974] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
[   34.553445] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[   34.553473] NFORCE2: chipset revision 162
[   34.553476] NFORCE2: not 100% native mode: will probe irqs later
[   34.553481] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[   34.553487] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[   34.553498]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[   34.553509]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[   34.553517] Probing IDE interface ide0...
[   34.845560] hda: WDC WD1200JB-00CRA1, ATA DISK drive
[   35.125437] hdb: WDC WD2000JB-00GVA0, ATA DISK drive
[   35.185943] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   35.214447] Probing IDE interface ide1...
[   35.605094] usb 3-6: new high speed USB device using ehci_hcd and address 6
[   35.738217] usb 3-6: configuration #1 chosen from 1 choice
[   35.953056] hdc: BENQ DVD DD DW1625, ATAPI CD/DVD-ROM drive
[   36.044897] usb 1-1: new full speed USB device using ohci_hcd and address 3
[   36.250686] usb 1-1: configuration #1 chosen from 1 choice
[   36.560669] usb 1-2: new full speed USB device using ohci_hcd and address 4
[   36.736708] hdd: ASUS DVD-ROM DVD-E616P 0104, ATAPI CD/DVD-ROM drive
[   36.768382] usb 1-2: configuration #1 chosen from 1 choice
[   36.793767] ide1 at 0x170-0x177,0x376 on irq 15
[   36.799025] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
[   36.799031] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 21 (level, high) -> IRQ 17
[   36.799038] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   36.850925] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[d9084000-d90847ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   36.856415] ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 20
[   36.856419] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [AP3C] -> GSI 20 (level, high) -> IRQ 18
[   36.856426] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
[   36.856432] 0000:02:01.0: 3Com PCI 3c920 Tornado at f08de000.
[   36.886016] hda: max request size: 128KiB
[   36.901034] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[   36.901043] hda: cache flushes not supported
[   36.901101]  hda: hda1 hda2 hda3 hda4
[   36.930211] hdb: max request size: 512KiB
[   36.931505] hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
[   36.933502] hdb: cache flushes supported
[   36.933544]  hdb: hdb1
[   36.974515] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[   36.974524] Uniform CD-ROM driver Revision: 3.20
[   36.991448] hdd: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
[   37.120420] usb 1-3: new low speed USB device using ohci_hcd and address 5
[   37.327057] usb 1-3: configuration #1 chosen from 1 choice
[   37.371868] Attempting manual resume
[   37.371872] swsusp: Resume From Partition 3:3
[   37.371874] PM: Checking swsusp image.
[   37.372013] PM: Resume from disk failed.
[   37.406364] kjournald starting.  Commit interval 5 seconds
[   37.406377] EXT3-fs: mounted filesystem with ordered data mode.
[   37.636201] usb 2-2: new full speed USB device using ohci_hcd and address 2
[   37.840631] usb 2-2: configuration #1 chosen from 1 choice
[   37.843653] usbcore: registered new interface driver hiddev
[   37.850752] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[   37.850775] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3
[   37.850788] usbcore: registered new interface driver usbhid
[   37.850791] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   37.966414] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[   38.232145] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000035a755]
[   45.183561] eth1:  setting half-duplex.
[   46.567272] NET: Registered protocol family 17
[   47.451447] Linux agpgart interface v0.102 (c) Dave Jones
[   47.458398] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   47.460226] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   47.461961] agpgart: Detected NVIDIA nForce2 chipset
[   47.466211] agpgart: AGP aperture is 64M @ 0xd0000000
[   47.581066] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[   47.581106] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[   47.820002] input: PC Speaker as /class/input/input3
[   48.391442] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1094
[   48.391460] usbcore: registered new interface driver usblp
[   48.391464] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[   48.592132] Linux video capture interface: v2.00
[   48.656312] bttv: driver version 0.9.16 loaded
[   48.656317] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   48.656387] bttv: Bt8xx card found (0).
[   48.656661] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   48.656671] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
[   48.656685] bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 19, latency: 32, mmio: 0xd8000000
[   48.656699] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[   48.656703] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
[   48.656741] bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init]
[   48.657215] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[   48.657960] bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no
[   48.657963] bttv0: using tuner=33
[   48.657967] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[   48.658711] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[   48.659452] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[   48.712240] tuner 2-004b: chip found @ 0x96 (bt878 #0 [sw])
[   48.712276] tda9887 2-004b: tda988[5/6/7] found @ 0x4b (tuner)
[   48.714078] tuner 2-0060: Chip ID is not zero. It is not a TEA5767
[   48.714081] tuner 2-0060: chip found @ 0xc0 (bt878 #0 [sw])
[   48.717279] tuner 2-0060: microtune: companycode=3cbf part=42 rev=2f
[   48.718860] tuner 2-0060: microtune MT2050 found, OK
[   48.722044] tuner 2-0060: microtune: companycode=3cbf part=42 rev=2f
[   48.723626] tuner 2-0060: microtune MT2050 found, OK
[   48.734954] bttv0: registered device video0
[   48.735009] bttv0: registered device vbi0
[   48.735036] bttv0: PLL: 28636363 => 35468950 .. ok
[   48.783328] parport: PnPBIOS parport detected.
[   48.783393] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   48.903294] bt878: AUDIO driver version 0.0.0 loaded
[   48.917143] bt878: Bt878 AUDIO function found (0).
[   48.917171] ACPI: PCI Interrupt 0000:01:0a.1[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
[   48.917179] bt878_probe: card id=[0x1211bd], Unknown card.
[   48.917181] Exiting..
[   48.917186] ACPI: PCI interrupt for device 0000:01:0a.1 disabled
[   48.917191] bt878: probe of 0000:01:0a.1 failed with error -22
[   48.920262] ubuntu/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(ZC3XX)
[   48.981680] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[   48.981687] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 16
[   48.981717] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   49.306974] intel8x0_measure_ac97_clock: measured 56806 usecs
[   49.306979] intel8x0: clocking to 48000
[   50.165919] usbcore: registered new interface driver gspca
[   50.165925] ubuntu/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[   50.421657] fuse init (API version 7.8)
[   50.444622] lp0: using parport0 (interrupt-driven).
[   50.491850] Adding 1951888k swap on /dev/disk/by-uuid/9f704c83-5708-48f5-85d4-ad96c2eb2393.  Priority:-1 extents:1 across:1951888k
[   50.782311] EXT3 FS on hda2, internal journal
[   50.955057] NET: Registered protocol family 10
[   50.955166] lo: Disabled Privacy Extensions
[   50.955529] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   51.174427] NTFS driver 2.1.28 [Flags: R/O MODULE].
[   51.215763] NTFS volume version 3.1.
[   55.353508] ibm_acpi: ec object not found
[   55.435110] input: Power Button (FF) as /class/input/input4
[   55.439713] ACPI: Power Button (FF) [PWRF]
[   55.475487] input: Power Button (CM) as /class/input/input5
[   55.480036] ACPI: Power Button (CM) [PWRB]
[   55.492440] No dock devices found.
[   55.518651] Using specific hotkey driver
[   55.628875] pcc_acpi: loading...
[   60.836151] [drm] Initialized drm 1.1.0 20060810
[   60.849931] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[   60.849943] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20
[   60.853377] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[   61.591835] ppdev: user-space parallel port driver
[   61.863606] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   61.863612] apm: overridden by ACPI.
[   62.527669] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[   62.527819] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[   62.528001] agpgart: Putting AGP V3 device at 0000:03:00.0 into 4x mode
[   76.810575] eth0: no IPv6 routers present
[   78.320803] [drm] Setting GART location based on new memory map
[   78.320815] [drm] Loading R300 Microcode
[   78.320865] [drm] writeback test succeeded in 1 usecs
[   99.772643] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[   99.772663] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[   99.772733] agpgart: Putting AGP V3 device at 0000:03:00.0 into 4x mode
[  100.060633] [drm] Setting GART location based on new memory map
[  100.060645] [drm] Loading R300 Microcode
[  100.060695] [drm] writeback test succeeded in 1 usecs
[ 1606.316783] usb 3-6: USB disconnect, address 6
[ 1612.903894] usb 1-3: USB disconnect, address 5
[ 1616.444195] usb 3-5: new high speed USB device using ehci_hcd and address 7
[ 1617.560911] usb 3-5: configuration #1 chosen from 1 choice
[ 1617.775319] usbcore: registered new interface driver libusual
[ 1617.782374] Initializing USB Mass Storage driver...
[ 1617.782489] scsi0 : SCSI emulation for USB Mass Storage devices
[ 1617.782552] usbcore: registered new interface driver usb-storage
[ 1617.782556] USB Mass Storage support registered.
[ 1617.782701] usb-storage: device found at 7
[ 1617.782703] usb-storage: waiting for device to settle before scanning
[ 1620.178520] usb 2-3: new low speed USB device using ohci_hcd and address 3
[ 1620.392875] usb 2-3: configuration #1 chosen from 1 choice
[ 1620.402910] input: Logitech USB-PS/2 Optical Mouse as /class/input/input6
[ 1620.402971] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-3
[ 1622.749564] usb-storage: device scan complete
[ 1622.750067] scsi 0:0:0:0: Direct-Access     Creative NOMAD MuVo TX    1105 PQ: 0 ANSI: 4
[ 1622.778152] SCSI device sda: 1016064 512-byte hdwr sectors (520 MB)
[ 1622.779018] sda: Write Protect is off
[ 1622.779021] sda: Mode Sense: 03 00 00 00
[ 1622.779024] sda: assuming drive cache: write through
[ 1622.781515] SCSI device sda: 1016064 512-byte hdwr sectors (520 MB)
[ 1622.782265] sda: Write Protect is off
[ 1622.782268] sda: Mode Sense: 03 00 00 00
[ 1622.782270] sda: assuming drive cache: write through
[ 1622.782604]  sda: sda1
[ 1622.784383] sd 0:0:0:0: Attached scsi removable disk sda
[ 1622.794451] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2250.685896] end_request: I/O error, dev fd0, sector 0
[ 2250.709883] end_request: I/O error, dev fd0, sector 0
[ 2309.211893] usb 1-2: USB disconnect, address 4
[ 2309.212010] drivers/usb/class/usblp.c: usblp0: removed

tchô

tomlohave

Re : [résolu]defauts disques durs

1) quant tu veux poster un log "un peu long", utilise la balise Code ou Quote ....

2)

[   36.931505] hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
[   36.933502] hdb: cache flushes supported
[   36.933544]  hdb: hdb1

donc ton disk est bien détecté ...

et il a même trouvé une partition : hdb1

Bon poste le résultat de

cat /etc/fstab