#1 Le 26/04/2012, à 12:38
- lorap1
pavé tactile non reconnu [ubuntu 10.04 portable] [Résolu]
Bonjour,
J'ai un ordinateur ultra-portable LDLC Mercure NB3-BBN, acheté fin 2011.
Impossible de faire reconnaître le pavé tactile sous 10.04.
J'ai écumé la documentation sur le pavé tactile, et installé non pas gpointing qui ne répond pas, mais gsynaptics.
Or, il demande toujours "GSynaptics couldn't initialize.
You have to set 'SHMConfig' 'true' in xorg.conf or XF86Config to use GSynaptics".
Or j'ai tout fait pour selon la doc. Même inscrire sous /etc/default/grub l'option "i8042.nopnp" sur la ligne demandée comme ceci : GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i8042.nopnp"
Est-ce que j'ai bien fait?
J'ai les pilotes windows mais sur DVD et c'est un .exe.
A quoi cela me servirait?
Vous avez une solution?
Résolu avec la nouvelle version d'OS UBUNTU
Dernière modification par lorap1 (Le 24/03/2019, à 17:15)
Ubuntu - Version 18.04 ;
X550CC (ASUS-NotebookSKU) ; Intel(R) Core(TM) i3-3217U CPU ; MT7630e 802.11bgn Wireless Netw ; RTL8111/8168/8411 PCI Express G; 1TB ST1000LM024 HN-M;
Hors ligne
#2 Le 07/05/2012, à 23:07
- lorap1
Re : pavé tactile non reconnu [ubuntu 10.04 portable] [Résolu]
Re-Bonjour,
J'ai un ultraportable, j'y ai installé ubuntu netbook mais 10.04 Lucid. Le pavé tactile ne fonctionne pas. J'ai suivi le fil; je mets le résultat des tests suivants:
utilisateur@utilisateur-laptop:~$ aptitude show xserver-xorg-input-synaptics | grep Version
Version : 1.2.2-1ubuntu4
utilisateur@utilisateur-laptop:~$ egrep -i 'synap|alps|etps' /proc/bus/input/devices
utilisateur@utilisateur-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
utilisateur@utilisateur-laptop:~$ xinput -list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ 2.4GHz 2way RF Mouse Receiver id=10 [slave pointer (2)]
⎜ ↳ PS/2 Generic Mouse id=12 [slave pointer (2)]
⎜ ↳ Macintosh mouse button emulation id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
utilisateur@utilisateur-laptop:~$
Je n'ai pas donc la possibilité comme erichtus de changer de noyau.
Peut-on me venir en aide? J'ai changé le fichier /usr/lib/X11/xorg.conf.d/10-synaptics.conf. Voici comme je l'ai changé:
Section "InputClass"
Identifier "touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "synaptics"
Option "SHMConfig" "true"
EndSection
Section "InputClass"
Identifier "Dell Inspiron embedded buttons quirks"
MatchTag "inspiron_1011|inspiron_1012"
MatchDevicePath "/dev/input/event*"
Driver "synaptics"
Option "JumpyCursorThreshold" "90"
Option "AreaBottomEdge" "4100"
EndSection
Section "InputClass"
Identifier "Dell Inspiron quirks"
MatchTag "inspiron_1120"
MatchDevicePath "/dev/input/event*"
Driver "synaptics"
Option "JumpyCursorThreshold" "250"
EndSection
Section "InputClass"
Identifier "HP Mininote quirks"
MatchTag "mininote_1000"
MatchDevicePath "/dev/input/event*"
Driver "synaptics"
Option "JumpyCursorThreshold" "20"
EndSection
Est-ce que j'ai bien fait?
Je doute qu'il faille changer dans le bios le touchpad. En effet, j'avais un Windows 7 intégral qui faisait fonctionner le pavé tactile sur la machine.
Pouvez-vous m'aider?
Evidemment, le "Touchpad" que j'ai installé ne fonctionne pas : il me donne :
GSynaptics couldn't initialize.
You have to set 'SHMConfig' 'true' in xorg.conf or XF86Config to use GSynaptics
Des solutions?
Ubuntu - Version 18.04 ;
X550CC (ASUS-NotebookSKU) ; Intel(R) Core(TM) i3-3217U CPU ; MT7630e 802.11bgn Wireless Netw ; RTL8111/8168/8411 PCI Express G; 1TB ST1000LM024 HN-M;
Hors ligne
#3 Le 17/06/2012, à 15:05
- lorap1
Re : pavé tactile non reconnu [ubuntu 10.04 portable] [Résolu]
Pas de réponses...
OK je ferme
Ubuntu - Version 18.04 ;
X550CC (ASUS-NotebookSKU) ; Intel(R) Core(TM) i3-3217U CPU ; MT7630e 802.11bgn Wireless Netw ; RTL8111/8168/8411 PCI Express G; 1TB ST1000LM024 HN-M;
Hors ligne