#151 Le 06/08/2013, à 19:14
- 3lazer4
Re : A quoi ressemble votre environnement -- Printemps/été 2013
@timsy : c'est la première distribution que je me suis installée avant de switcher sur arch. Donc oui c'est très accessible et surtout très simple et rapide (je dis simple au sens de l'interface, pas de fioritures). Franchement je ne peux que te la conseiller, en plus les membres du forum français sont très sympas
Hors ligne
#152 Le 06/08/2013, à 19:21
- pololasi
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Ah Crunchbang... je sens que je vais me l'installer un de ces quatre, d'ailleurs pour quelqu'un de "lambda" ça reste accessible?
Merci pour les infos sinon!
Oh oui ! Je suis assez lambda par rapport à l'"informagique" et j'ai crunchbang installé sur une clé USB en attendant de le mettre sur un portable d'ici quelque temps.
Bon y a pas de logithèque mais de toutes façons je m'en sers plus sur Xubuntu.
Perso : Deux Thinkpad X 200 ; Intel Core2 Duo CPU P8600 et P8800 ; 2Go et 4Go DDR3 ; Intel 4500MHD Xubuntu 64 bits
Asus EeePC900 ; Intel Celeron 900MHz ; Intel 915GM ; 1Go DDR2 - SSD 16Go ; Archlinux+Fluxbox
Proliant ML 110 Open Media Vault
Boulot : Dell Optiplex AIO ; Intel Core i7-4770S CPU @ 3.9GHz ; 8 Go DDR3 ; Linux Mint 18 Cinnamon 64 bits
Hors ligne
#153 Le 06/08/2013, à 20:17
- ChienPanzer
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Crunchbang, c'est bien mais installer Openbox à partir d'un netinstall soi-même, c'est une jouissance.
1010011010
Hors ligne
#154 Le 06/08/2013, à 22:40
- Slystone
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Crunchbang, c'est bien mais installer Openbox à partir d'un netinstall soi-même, c'est une jouissance.
Chacun son truc. Je trouve les assez méprisants. Perso je trouve que le bureau par défaut est impeccable, il est exactement comme je le choisirais.
«Rigid, the skeleton of habit alone upholds the human frame.» - Virginia Woolf.
Hors ligne
#155 Le 07/08/2013, à 01:09
- timsy
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Okey bah j’essayerai ça prochainement alors, si c'est easy ça me va; ptet le prochain desk sous Crunch alors!
Acer Aspire 7735ZG - Millésime 0010.0000.0000.1001 - Xubuntu 14.04 LTS 64 bits
Libre depuis avril 2010, Savoure xfce
Le meilleur ne s'impose pas, il s'offre.
Hors ligne
#156 Le 12/08/2013, à 10:15
- spinoziste
Re : A quoi ressemble votre environnement -- Printemps/été 2013
@Slystone : J'aime beaucoup ton theme d'autant plus que Ghost in the shell...
À la recherche des logos monstrueux celui de xcreensaver !
EDIT : Je viens de modifier la doc en ajoutant une methode glanée sur le net permettant de changer cet inélégant logo .
Sinon voici mon EEE :
Dernière modification par spinoziste (Le 12/08/2013, à 15:00)
Nous mourrons tous .
Hors ligne
#157 Le 12/08/2013, à 15:59
- Phlox
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Salut,
Voici l'ordi familial sous Debian Wheezy Xfce, pour le thème c'est greybird-compact et Faenza-Darkest pour les icônes.
Sinon j'utilise tilda comme terminal, moc pour la musique et conky.
Voilà !
Édit : je laisse mon conkyrc et le script lua qui va avec, ça pourra toujours (me) servir…
###### ####### ## ## ## ## ## ## ######## ###### ### ###### ####### ######## ### ########
## ## ## ## ### ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
## ## ## #### ## ## ## #### ## ## ## ## ## ## ## ## ## ## ## ## ##
## ## ## ## ## ## ##### ## ## ###### ## ## ## #### ## ## ######## ## ## ########
## ## ## ## #### ## ## ## ## ## ######### ## ## ## ## ## ## ######### ## ##
## ## ## ## ## ### ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
###### ####### ## ## ## ## ## ## ###### ## ## ###### ####### ######## ## ## ## ##
background yes #Pour que conky tourne en arrière plan ; no = pour les tests
update_interval 1
total_run_times 0 #Temps en secondes ; 0 = toujours actif
cpu_avg_samples 2 #Nb d'échantillons pour calculer la moyenne d'utilisation CPU
net_avg_samples 2
override_utf8_locale yes
double_buffer yes
no_buffers yes
text_buffer_size 2048
#imlib_cache_size 0
# Window specifications #
own_window yes
own_window_transparent yes
own_window_argb_value 0
own_window_argb_visual yes
own_window_type desktop
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
border_inner_margin 0
border_outer_margin 0
minimum_size 300 0
maximum_width 300
alignment top_right
gap_x 5
gap_y 28
# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
# Text settings #
use_xft yes
xftfont monospace:size=8
xftalpha 1
# Pour affichier les caracteres speciaux
override_utf8_locale yes
short_units yes
uppercase no
temperature_unit celsius
default_color 848484 #fer
color1 766F64 #ARDOISE
color2 FF7F00 #carotte
color3 CECECE #argent
color4 FF0000 #rouge
color5 00561B #vert impérial
color6 34C924 #vert pomme
color7 149414 #emeraude
color8 096A09 #vert clair
## ││ ▽▼△▲▵▴▾▿ ◥▶◀◤ ✌
#
## │ ─ ┌ ┬ ┐ └ ┴ ┘ ├ ┼ ┤
#
## ║ ═ ╔ ╦ ╗ ╚ ╩ ╝ ╠ ╬ ╣
#lua_load ~/.conky/scripts/draw_bg.lua
#lua_draw_hook_pre draw_bg
lua_load ~/.conky/scripts/bargraph_small.lua
lua_draw_hook_post main_bars
TEXT
┌─┬${color3}Système${color}──────────────────────$color3${time %d/%m/%Y}$color
│ ├Bureaux ${goto 109}${desktop}/$desktop_number$color3${alignr 6}${time %H:%M:%S}$color
│ ├Uptime ${goto 109}${uptime}
│ ├${execi 86400 lsb_release -si} ${goto 109}${execi 86400 lsb_release -sr} ${execi 86400 lsb_release -sc}
│ ├Hostname ${goto 109}${nodename}
│ ├Linux ${goto 109}${kernel}
│ └Temp.${goto 109}C/M ${hwmon 1 temp 2}° CPU ${hwmon 0 temp 1}° HDD ${hddtemp /dev/sda}°
│
├─┬${color3}Charge Système$color
│ ├┬Core 1 ${voffset 4}${goto 109}${freq_g 1} GHz${goto 170}${cpugraph cpu1 12,85 303030 149414}${alignr 6}${cpu cpu1}%${voffset -4}
│ │└───────────
│ ├┬Core 2 ${voffset 4}${goto 109}${freq_g 2} GHz${goto 170}${cpugraph cpu2 12,85 303030 149414}${alignr 6}${cpu cpu2}%${voffset -4}
│ │└───────────
│ ├┬Ram ${voffset 4}${goto 109}${mem}/$memmax${alignr 6}$memperc%${voffset -4}
│ │└───────────
│ └┬Swap ${voffset 4}${goto 109}${swap}/$swapmax${alignr 6}$swapperc%${voffset -4}
│ └───────────
│
├─┬${color3}Système de Fichiers$color
│ ├┬root ${voffset 4}${goto 109}${fs_used /}/${fs_size /}${alignr 16}${diskiograph_read /dev/sda1 12,22 303030 149414}\
${alignr 15}${diskiograph_write /dev/sda1 12,22 6E0B14 FF0000}${alignr 6}${fs_used_perc /}%${voffset -4}
│ │└───────────
│ └┬home ${voffset 4}${goto 109}${fs_used /home}/${fs_size /home}${alignr 16}${diskiograph_read /dev/sda3 12,22 303030 149414}\
${alignr 15}${diskiograph_write /dev/sda3 12,22 6E0B14 FF0000}${alignr 6}${fs_used_perc /home}%${voffset -4}
│ └───────────
│
├─┬${color3}Mini-Top${color}──────────load : $loadavg
│ ├───┬─────────────────────┬─────┬─────┐
│ │${goto 36}NOM${goto 190}CPU${goto 233}MEM${goto 274}PID
│ ├1.${color4}${top name 1}$alignr${top cpu 1}${top mem 1} ${top pid 1}$color
│ ├2.${color6}${top name 2}$alignr${top cpu 2}${top mem 2} ${top pid 2}$color
│ ├3.${color7}${top name 3}$alignr${top cpu 3}${top mem 3} ${top pid 3}$color
│ ├4.${color8}${top name 4}$alignr${top cpu 4}${top mem 4} ${top pid 4}$color
│ ├5.${color5}${top name 5}$alignr${top cpu 5}${top mem 5} ${top pid 5}$color
│ │${goto 36}Total ${alignr}${processes} ($running_processes en cours)
│ └────┴────────────────────┴─────┘
│
├─┬${color3}Net${color}───────────────\
(${goto 147}${texeci 5000 wget http://checkip.dyndns.org -O - -o /dev/null | cut -d : -f 2 | cut -d \< -f 1})
│ ├┬${color3}Eth0${color}─────────────(${addr eth0})
│ │${if_existing /sys/class/net/eth0/operstate up}├Sortant ${goto 80}${upspeedgraph eth0 12,60 303030 149414} ${upspeed eth0}/s${goto 205}↑${totalup eth0}
│ │└Entrant ${goto 80}${downspeedgraph eth0 12,60 6E0B14 FF0000} ${downspeed eth0}/s${goto 205}↓${totaldown eth0}$else└Débranché !$endif
│ ├┬${color3}Wlan0${color}────────────(${addr wlan0})
│ │${if_existing /sys/class/net/wlan0/operstate up}├Sortant ${goto 80}${upspeedgraph wlan0 12,60 303030 149414} ${upspeed wlan0}/s${goto 205}↑${totalup wlan0}
│ │├Entrant ${goto 80}${downspeedgraph wlan0 12,60 6E0B14 FF0000} ${downspeed wlan0}/s${goto 205}↓${totaldown wlan0}
│ │└Signal ${wireless_link_qual wlan0}%$else└Déconnecté !$endif
│ └┬${color3}Ports${color}────────┬──────┐
│ ├Ouverts(${tcp_portmon 1 65535 count})${goto 113}In(${tcp_portmon 1 32767 count})${goto 162}Out(${tcp_portmon 32768 61000 count})
│ ├${tcp_portmon 1 65535 rport 0}${goto 92}${tcp_portmon 1 65535 rip 0}
│ ├${tcp_portmon 1 65535 rport 1}${goto 92}${tcp_portmon 1 65535 rip 1}
│ ├${tcp_portmon 1 65535 rport 2}${goto 92}${tcp_portmon 1 65535 rip 2}
│ ├${tcp_portmon 1 65535 rport 3}${goto 92}${tcp_portmon 1 65535 rip 3}
│ ├${tcp_portmon 1 65535 rport 4}${goto 92}${tcp_portmon 1 65535 rip 4}
│ ├${tcp_portmon 1 65535 rport 5}${goto 92}${tcp_portmon 1 65535 rip 5}
│ ├${tcp_portmon 1 65535 rport 6}${goto 92}${tcp_portmon 1 65535 rip 6}
│ ├${tcp_portmon 1 65535 rport 7}${goto 92}${tcp_portmon 1 65535 rip 7}
│ ├${tcp_portmon 1 65535 rport 8}${goto 92}${tcp_portmon 1 65535 rip 8}
│ ├${tcp_portmon 1 65535 rport 9}${goto 92}${tcp_portmon 1 65535 rip 9}
│ ├${tcp_portmon 1 65535 rport 10}${goto 92}${tcp_portmon 1 65535 rip 10}
│ └${tcp_portmon 1 65535 rport 11}${goto 92}${tcp_portmon 1 65535 rip 11}
│
└─┬${color3}Moc$color
${if_running mocp}├$color6${execpi 1 mocp -Q %state}$color
├${execpi 1 mocp -Q %artist}
├${execpi 1 mocp -Q %album}
├${execpi 1 mocp -Q %song}
├${execpi 1 mocp -Q %ct} / ${execpi 1 mocp -Q %tt}
└${execpi 1 mocp -Q %b}kbps${else}└Pas de musique !$endif
--[[ BARGRAPH WIDGET
v2.1 by wlourf (07 Jan. 2011)
this widget draws a bargraph with different effects
http://u-scripts.blogspot.com/2010/07/bargraph-widget.html
To call the script in a conky, use, before TEXT
lua_load /path/to/the/script/bargraph.lua
lua_draw_hook_pre main_rings
and add one line (blank or not) after TEXT
Parameters are :
3 parameters are mandatory
name - the name of the conky variable to display, for example for {$cpu cpu0}, just write name="cpu"
arg - the argument of the above variable, for example for {$cpu cpu0}, just write arg="cpu0"
arg can be a numerical value if name=""
max - the maximum value the above variable can reach, for example, for {$cpu cpu0}, just write max=100
Optional parameters:
x,y - coordinates of the starting point of the bar, default = middle of the conky window
cap - end of cap line, ossibles values are r,b,s (for round, butt, square), default="b"
http://www.cairographics.org/samples/set_line_cap/
angle - angle of rotation of the bar in degress, default = 0 (i.e. a vertical bar)
set to 90 for an horizontal bar
skew_x - skew bar around x axis, default = 0
skew_y - skew bar around y axis, default = 0
blocks - number of blocks to display for a bar (values >0) , default= 10
height - height of a block, default=10 pixels
width - width of a block, default=20 pixels
space - space between 2 blocks, default=2 pixels
angle_bar - this angle is used to draw a bar on a circular way (ok, this is no more a bar !) default=0
radius - for cicular bars, internal radius, default=0
with radius, parameter width has no more effect.
Colours below are defined into braces {colour in hexadecimal, alpha}
fg_colour - colour of a block ON, default= {0x00FF00,1}
bg_colour - colour of a block OFF, default = {0x00FF00,0.5}
alarm - threshold, values after this threshold will use alarm_colour colour , default=max
alarm_colour - colour of a block greater than alarm, default=fg_colour
smooth - (true or false), create a gradient from fg_colour to bg_colour, default=false
mid_colour - colours to add to gradient, with this syntax {position into the gradient (0 to1), colour hexa, alpha}
for example, this table {{0.25,0xff0000,1},{0.5,0x00ff00,1},{0.75,0x0000ff,1}} will add
3 colurs to gradient created by fg_colour and alarm_colour, default=no mid_colour
led_effect - add LED effects to each block, default=no led_effect
if smooth=true, led_effect is not used
possibles values : "r","a","e" for radial, parallelel, perdendicular to the bar (just try!)
led_effect has to be used with theses colours :
fg_led - middle colour of a block ON, default = fg_colour
bg_led - middle colour of a block OFF, default = bg_colour
alarm_led - middle colour of a block > ALARM, default = alarm_colour
reflection parameters, not avaimable for circular bars
reflection_alpha - add a reflection effect (values from 0 to 1) default = 0 = no reflection
other values = starting opacity
reflection_scale - scale of the reflection (default = 1 = height of text)
reflection_length - length of reflection, define where the opacity will be set to zero
calues from 0 to 1, default =1
reflection - position of reflection, relative to a vertical bar, default="b"
possibles values are : "b","t","l","r" for bottom, top, left, right
draw_me - if set to false, text is not drawn (default = true or 1)
it can be used with a conky string, if the string returns 1, the text is drawn :
example : "${if_empty ${wireless_essid wlan0}}${else}1$endif",
v1.0 (10 Feb. 2010) original release
v1.1 (13 Feb. 2010) numeric values can be passed instead conky stats with parameters name="", arg = numeric_value
v1.2 (28 Feb. 2010) just renamed the widget to bargraph
v1.3 (03 Mar. 2010) added parameters radius & angle_bar to draw the bar in a circular way
v2.0 (12 Jul. 2010) rewrite script + add reflection effects and parameters are now set into tables
v2.1 (07 Jan. 2011) Add draw_me parameter and correct memory leaks, thanks to "Creamy Goodness"
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation version 3 (GPLv3)
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-- MA 02110-1301, USA.
]]
require 'cairo'
----------------START OF PARAMETERS ----------
function conky_main_bars()
local bars_settings={
{ --[ Graph for CPU1 ]--
name="cpu",
arg="cpu1",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.3},
fg_colour={0x00FF00,0.65},
mid_colour={{0.45,0xFFFF00,0.70}},
x=108,y=134,
blocks=93,
space=1,
height=1,width=8,
angle=90,
smooth=true
},
{ --[ Graph for CPU2 ]--
name="cpu",
arg="cpu2",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.3},
fg_colour={0x00FF00,0.65},
mid_colour={{0.45,0xFFFF00,0.70}},
x=108,y=160,
blocks=93,
space=1,
height=1,width=8,
angle=90,
smooth=true
},
{ --[ Graph for Memory ]--
name="memperc",
arg="",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.3},
fg_colour={0x00FF00,0.65},
mid_colour={{0.45,0xFFFF00,0.70}},
x=108,y=186,
blocks=93,
space=1,
height=1,width=8,
angle=90,
smooth=true
},
{ --[ Graph for Root ]--
name="fs_used_perc",
arg="/",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.3},
fg_colour={0x00FF00,0.65},
mid_colour={{0.45,0xFFFF00,0.70}},
x=108,y=264,
blocks=93,
space=1,
height=1,width=8,
angle=90,
smooth=true
},
{ --[ Graph for Root ]--
name="fs_used_perc",
arg="/home",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.3},
fg_colour={0x00FF00,0.65},
mid_colour={{0.45,0xFFFF00,0.70}},
x=108,y=290,
blocks=93,
space=1,
height=1,width=8,
angle=90,
smooth=true
},
{ --[ Graph for Swap ]--
name="swapperc",
arg="",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.3},
fg_colour={0x00FF00,0.65},
mid_colour={{0.45,0xFFFF00,0.70}},
x=108,y=212,
blocks=93,
space=1,
height=1,width=8,
angle=90,
smooth=true
},
}
-----------END OF PARAMETERS--------------
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
cr = cairo_create(cs)
--prevent segmentation error when reading cpu state
if tonumber(conky_parse('${updates}'))>3 then
for i in pairs(bars_settings) do
draw_multi_bar_graph(bars_settings[i])
end
end
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
end
function draw_multi_bar_graph(t)
cairo_save(cr)
--check values
if t.draw_me == true then t.draw_me = nil end
if t.draw_me ~= nil and conky_parse(tostring(t.draw_me)) ~= "1" then return end
if t.name==nil and t.arg==nil then
print ("No input values ... use parameters 'name' with 'arg' or only parameter 'arg' ")
return
end
if t.max==nil then
print ("No maximum value defined, use 'max'")
return
end
if t.name==nil then t.name="" end
if t.arg==nil then t.arg="" end
--set default values
if t.x == nil then t.x = conky_window.width/2 end
if t.y == nil then t.y = conky_window.height/2 end
if t.blocks == nil then t.blocks=10 end
if t.height == nil then t.height=10 end
if t.angle == nil then t.angle=0 end
t.angle = t.angle*math.pi/180
--line cap style
if t.cap==nil then t.cap = "b" end
local cap="b"
for i,v in ipairs({"s","r","b"}) do
if v==t.cap then cap=v end
end
local delta=0
if t.cap=="r" or t.cap=="s" then delta = t.height end
if cap=="s" then cap = CAIRO_LINE_CAP_SQUARE
elseif cap=="r" then
cap = CAIRO_LINE_CAP_ROUND
elseif cap=="b" then
cap = CAIRO_LINE_CAP_BUTT
end
--end line cap style
--if t.led_effect == nil then t.led_effect="r" end
if t.width == nil then t.width=20 end
if t.space == nil then t.space=2 end
if t.radius == nil then t.radius=0 end
if t.angle_bar == nil then t.angle_bar=0 end
t.angle_bar = t.angle_bar*math.pi/360 --halt angle
--colours
if t.bg_colour == nil then t.bg_colour = {0x00FF00,0.5} end
if #t.bg_colour~=2 then t.bg_colour = {0x00FF00,0.5} end
if t.fg_colour == nil then t.fg_colour = {0x00FF00,1} end
if #t.fg_colour~=2 then t.fg_colour = {0x00FF00,1} end
if t.alarm_colour == nil then t.alarm_colour = t.fg_colour end
if #t.alarm_colour~=2 then t.alarm_colour = t.fg_colour end
if t.mid_colour ~= nil then
for i=1, #t.mid_colour do
if #t.mid_colour[i]~=3 then
print ("error in mid_color table")
t.mid_colour[i]={1,0xFFFFFF,1}
end
end
end
if t.bg_led ~= nil and #t.bg_led~=2 then t.bg_led = t.bg_colour end
if t.fg_led ~= nil and #t.fg_led~=2 then t.fg_led = t.fg_colour end
if t.alarm_led~= nil and #t.alarm_led~=2 then t.alarm_led = t.fg_led end
if t.led_effect~=nil then
if t.bg_led == nil then t.bg_led = t.bg_colour end
if t.fg_led == nil then t.fg_led = t.fg_colour end
if t.alarm_led == nil then t.alarm_led = t.fg_led end
end
if t.alarm==nil then t.alarm = t.max end --0.8*t.max end
if t.smooth == nil then t.smooth = false end
if t.skew_x == nil then
t.skew_x=0
else
t.skew_x = math.pi*t.skew_x/180
end
if t.skew_y == nil then
t.skew_y=0
else
t.skew_y = math.pi*t.skew_y/180
end
if t.reflection_alpha==nil then t.reflection_alpha=0 end
if t.reflection_length==nil then t.reflection_length=1 end
if t.reflection_scale==nil then t.reflection_scale=1 end
--end of default values
local function rgb_to_r_g_b(col_a)
return ((col_a[1] / 0x10000) % 0x100) / 255., ((col_a[1] / 0x100) % 0x100) / 255., (col_a[1] % 0x100) / 255., col_a[2]
end
--functions used to create patterns
local function create_smooth_linear_gradient(x0,y0,x1,y1)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end
local function create_smooth_radial_gradient(x0,y0,r0,x1,y1,r1)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end
local function create_led_linear_gradient(x0,y0,x1,y1,col_alp,col_led)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1) ---delta, 0,delta+ t.width,0)
cairo_pattern_add_color_stop_rgba (pat, 0.0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1.0, rgb_to_r_g_b(col_alp))
return pat
end
local function create_led_radial_gradient(x0,y0,r0,x1,y1,r1,col_alp,col_led,mode)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
if mode==3 then
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
else
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
end
return pat
end
local function draw_single_bar()
--this fucntion is used for bars with a single block (blocks=1) but
--the drawing is cut in 3 blocks : value/alarm/background
--not zvzimzblr for circular bar
local function create_pattern(col_alp,col_led,bg)
local pat
if not t.smooth then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, 0,t.width/2,-t.height,col_alp,col_led)
elseif t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, -t.height/2, 0, t.width/2,-t.height/2,t.height/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
else
if bg then
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(t.bg_colour))
else
pat = create_smooth_linear_gradient(t.width/2, 0, t.width/2,-t.height)
end
end
return pat
end
local y1=-t.height*pct/100
local y2,y3
if pct>(100*t.alarm/t.max) then
y1 = -t.height*t.alarm/100
y2 = -t.height*pct/100
if t.smooth then y1=y2 end
end
if t.angle_bar==0 then
--block for fg value
local pat = create_pattern(t.fg_colour,t.fg_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,0,t.width,y1)
cairo_fill(cr)
cairo_pattern_destroy(pat)
-- block for alarm value
if not t.smooth and y2 ~=nil then
pat = create_pattern(t.alarm_colour,t.alarm_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,y1,t.width,y2-y1)
cairo_fill(cr)
y3=y2
cairo_pattern_destroy(pat)
else
y2,y3=y1,y1
end
-- block for bg value
cairo_rectangle(cr,0,y2,t.width,-t.height-y3)
pat = create_pattern(t.bg_colour,t.bg_led,true)
cairo_set_source(cr,pat)
cairo_pattern_destroy(pat)
cairo_fill(cr)
end
end --end single bar
local function draw_multi_bar()
--function used for bars with 2 or more blocks
for pt = 1,t.blocks do
--set block y
local y1 = -(pt-1)*(t.height+t.space)
local light_on=false
--set colors
local col_alp = t.bg_colour
local col_led = t.bg_led
if pct>=(100/t.blocks) or pct>0 then --ligth on or not the block
if pct>=(pcb*(pt-1)) then
light_on = true
col_alp = t.fg_colour
col_led = t.fg_led
if pct>=(100*t.alarm/t.max) and (pcb*pt)>(100*t.alarm/t.max) then
col_alp = t.alarm_colour
col_led = t.alarm_led
end
end
end
--set colors
--have to try to create gradients outside the loop ?
local pat
if not t.smooth then
if t.angle_bar==0 then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, -t.height/2+y1,t.width/2,0+t.height/2+y1,col_alp,col_led)
elseif t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, y1, 0, t.width/2,y1,t.width/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
else
if t.led_effect=="a" then
pat = create_led_radial_gradient (0, 0, t.radius+(t.height+t.space)*(pt-1),
0, 0, t.radius+(t.height+t.space)*(pt),
col_alp,col_led,3)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
end
else
if light_on then
if t.angle_bar==0 then
pat = create_smooth_linear_gradient(t.width/2, t.height/2, t.width/2,-(t.blocks-0.5)*(t.height+t.space))
else
pat = create_smooth_radial_gradient(0, 0, (t.height+t.space), 0,0,(t.blocks+1)*(t.height+t.space),2)
end
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(t.bg_colour))
end
end
cairo_set_source (cr, pat)
cairo_pattern_destroy(pat)
--draw a block
if t.angle_bar==0 then
cairo_move_to(cr,0,y1)
cairo_line_to(cr,t.width,y1)
else
cairo_arc( cr,0,0,
t.radius+(t.height+t.space)*(pt)-t.height/2,
-t.angle_bar -math.pi/2 ,
t.angle_bar -math.pi/2)
end
cairo_stroke(cr)
end
end
local function setup_bar_graph()
--function used to retrieve the value to display and to set the cairo structure
if t.blocks ~=1 then t.y=t.y-t.height/2 end
local value = 0
if t.name ~="" then
value = tonumber(conky_parse(string.format('${%s %s}', t.name, t.arg)))
--$to_bytes doesn't work when value has a decimal point,
--https://garage.maemo.org/plugins/ggit/browse.php/?p=monky;a=commitdiff;h=174c256c81a027a2ea406f5f37dc036fac0a524b;hp=d75e2db5ed3fc788fb8514121f67316ac3e5f29f
--http://sourceforge.net/tracker/index.php?func=detail&aid=3000865&group_id=143975&atid=757310
--conky bug?
--value = (conky_parse(string.format('${%s %s}', t.name, t.arg)))
--if string.match(value,"%w") then
-- value = conky_parse(string.format('${to_bytes %s}',value))
--end
else
value = tonumber(t.arg)
end
if value==nil then value =0 end
pct = 100*value/t.max
pcb = 100/t.blocks
cairo_set_line_width (cr, t.height)
cairo_set_line_cap (cr, cap)
cairo_translate(cr,t.x,t.y)
cairo_rotate(cr,t.angle)
local matrix0 = cairo_matrix_t:create()
tolua.takeownership(matrix0)
cairo_matrix_init (matrix0, 1,t.skew_y,t.skew_x,1,0,0)
cairo_transform(cr,matrix0)
--call the drawing function for blocks
if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
if t.reflection=="t" or t.reflection=="b" then cairo_translate(cr,0,-t.height) end
else
draw_multi_bar()
end
--dot for reminder
--[[
if t.blocks ~=1 then
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,t.height/2,3,0,2*math.pi)
cairo_fill(cr)
else
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,0,3,0,2*math.pi)
cairo_fill(cr)
end]]
--call the drawing function for reflection and prepare the mask used
if t.reflection_alpha>0 and t.angle_bar==0 then
local pat2
local matrix1 = cairo_matrix_t:create()
tolua.takeownership(matrix1)
if t.angle_bar==0 then
pts={-delta/2,(t.height+t.space)/2,t.width+delta,-(t.height+t.space)*(t.blocks)}
if t.reflection=="t" then
cairo_matrix_init (matrix1,1,0,0,-t.reflection_scale,0,-(t.height+t.space)*(t.blocks-0.5)*2*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,-(t.height+t.space)*(t.blocks),t.width/2,(t.height+t.space)/2)
elseif t.reflection=="r" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,delta+2*t.width,0)
pat2 = cairo_pattern_create_linear (delta/2+t.width,0,-delta/2,0)
elseif t.reflection=="l" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,-delta,0)
pat2 = cairo_pattern_create_linear (-delta/2,0,delta/2+t.width,-0)
else --bottom
cairo_matrix_init (matrix1,1,0,0,-1*t.reflection_scale,0,(t.height+t.space)*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,(t.height+t.space)/2,t.width/2,-(t.height+t.space)*(t.blocks))
end
end
cairo_transform(cr,matrix1)
if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
cairo_translate(cr,0,-t.height/2)
else
draw_multi_bar()
end
cairo_set_line_width(cr,0.01)
cairo_pattern_add_color_stop_rgba (pat2, 0,0,0,0,1-t.reflection_alpha)
cairo_pattern_add_color_stop_rgba (pat2, t.reflection_length,0,0,0,1)
if t.angle_bar==0 then
cairo_rectangle(cr,pts[1],pts[2],pts[3],pts[4])
end
cairo_clip_preserve(cr)
cairo_set_operator(cr,CAIRO_OPERATOR_CLEAR)
cairo_stroke(cr)
cairo_mask(cr,pat2)
cairo_pattern_destroy(pat2)
cairo_set_operator(cr,CAIRO_OPERATOR_OVER)
end --reflection
pct,pcb=nil
end --setup_bar_graph()
--start here !
setup_bar_graph()
cairo_restore(cr)
end
Dernière modification par tsagobar (Le 29/08/2013, à 10:26)
Hors ligne
#159 Le 12/08/2013, à 17:18
- spinoziste
Re : A quoi ressemble votre environnement -- Printemps/été 2013
@tsagobar : Pas mal . XFCE ça rox ! Et le verbiste aussi !
Dernière modification par spinoziste (Le 12/08/2013, à 17:27)
Nous mourrons tous .
Hors ligne
#160 Le 12/08/2013, à 17:43
- Phlox
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Et le verbiste aussi !
Indispensable !
Hors ligne
#161 Le 12/08/2013, à 17:44
- Slystone
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Merci spinoziste, j'aime beaucoup le tien aussi. C'est quelle ville ?
Aurais-tu un petit lien pour le wall stp ?
@ tsagobar : sympa !
«Rigid, the skeleton of habit alone upholds the human frame.» - Virginia Woolf.
Hors ligne
#162 Le 12/08/2013, à 18:14
- Phlox
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Merci
Pour le conky je me suis inspiré de celui-ci.
Dernière modification par tsagobar (Le 12/08/2013, à 18:16)
Hors ligne
#163 Le 12/08/2013, à 18:59
- spinoziste
Re : A quoi ressemble votre environnement -- Printemps/été 2013
@Slystone : Je le recherche mais je ne sais plus . Il est sur wallbase .
@tsagobar : Le Verbiste m' a déjà sorti de mauvais pas .
Nous mourrons tous .
Hors ligne
#164 Le 12/08/2013, à 19:27
- Slystone
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Si tu l'as sur ton bureau, tu n'as pas besoin de le chercher. ^^ Il suffit d'aller sur un simple pix.machin.org, et envoyer le fichier (ou déposer sur son serveur si on en a un).
«Rigid, the skeleton of habit alone upholds the human frame.» - Virginia Woolf.
Hors ligne
#166 Le 13/08/2013, à 00:02
- Slystone
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Génial, merci.
«Rigid, the skeleton of habit alone upholds the human frame.» - Virginia Woolf.
Hors ligne
#167 Le 13/08/2013, à 20:31
- Seco59
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Elementary OS Luna, enfin sortie en version finale :
J'ai juste changé le dock, le thème d'icônes et la police, c'est vrai que ça fait très mac os comme distro mais c'est clean, moi j'aime bien
Acer Aspire - AMD Athlon II X2 260 3.2 Ghz - 4 Go de Ram - ATI Radeon HD5450.
Fedora 17 / XFCE 4.10
Hors ligne
#168 Le 13/08/2013, à 21:05
- pololasi
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Elementary OS Luna, enfin sortie en version finale :
http://img11.hostingpics.net/thumbs/mini_236240Capturedu20130813100015.png
http://img11.hostingpics.net/thumbs/mini_727699Capturedu20130813095951.png
J'ai juste changé le dock, le thème d'icônes et la police, c'est vrai que ça fait très mac os comme distro mais c'est clean, moi j'aime bien
C'est xfaenza ton thème d’icônes non ?
Sinon ça fait plusieurs fois que je vois de l'Elementary OS ici. C'est basé sur quoi cette distro ?
Perso : Deux Thinkpad X 200 ; Intel Core2 Duo CPU P8600 et P8800 ; 2Go et 4Go DDR3 ; Intel 4500MHD Xubuntu 64 bits
Asus EeePC900 ; Intel Celeron 900MHz ; Intel 915GM ; 1Go DDR2 - SSD 16Go ; Archlinux+Fluxbox
Proliant ML 110 Open Media Vault
Boulot : Dell Optiplex AIO ; Intel Core i7-4770S CPU @ 3.9GHz ; 8 Go DDR3 ; Linux Mint 18 Cinnamon 64 bits
Hors ligne
#169 Le 14/08/2013, à 00:15
- Seco59
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Seco59 a écrit :Elementary OS Luna, enfin sortie en version finale :
http://img11.hostingpics.net/thumbs/mini_236240Capturedu20130813100015.png
http://img11.hostingpics.net/thumbs/mini_727699Capturedu20130813095951.png
J'ai juste changé le dock, le thème d'icônes et la police, c'est vrai que ça fait très mac os comme distro mais c'est clean, moi j'aime bien
C'est xfaenza ton thème d’icônes non ?
Sinon ça fait plusieurs fois que je vois de l'Elementary OS ici. C'est basé sur quoi cette distro ?
C'est Faience Moon Blue le thème d'icône (un mix de Faience Blue et Elementary)
Elementary OS est une distro basée sur Ubuntu 12.04 et qui propose leur propre environnement de bureau (Pantheon) ainsi que quelques logiciels spécifiques, tu peux d'ailleurs voir une petite vidéo dans laquelle ils présentent leur interface sur le site officiel : http://elementaryos.org/
Dernière modification par Seco59 (Le 14/08/2013, à 00:16)
Acer Aspire - AMD Athlon II X2 260 3.2 Ghz - 4 Go de Ram - ATI Radeon HD5450.
Fedora 17 / XFCE 4.10
Hors ligne
#170 Le 14/08/2013, à 01:17
- spinoziste
Re : A quoi ressemble votre environnement -- Printemps/été 2013
@Seco59: C'est tres joli en effet . Panthéon je connaissais pas .
Nous mourrons tous .
Hors ligne
#171 Le 15/08/2013, à 09:59
- Rolinh
Re : A quoi ressemble votre environnement -- Printemps/été 2013
Hors ligne
#173 Le 15/08/2013, à 10:56
- F50
Re : A quoi ressemble votre environnement -- Printemps/été 2013
A propos golgot200, tu utilises aussi Deadbeef, c'est quoi ton lecteur avec ce spectromètre (en-bas à droite)? C'est un truck que j'aimerais bien, le plus cool serait d'avoir un spectromètre indépendant sur le bureau quand la fenêtre du lecteur est réduite.
#174 Le 15/08/2013, à 11:07
- Compte anonymisé
Re : A quoi ressemble votre environnement -- Printemps/été 2013
@fcn50
C'est Clémentine.
Tu peux installer Audacious
Ou un conky, mais là, c'est une autre paire de manches !!!
EDIT: J'essaie ce truc :
http://spectrum3d.sourceforge.net/documentation.html
Dernière modification par Compte anonymisé (Le 15/08/2013, à 11:21)
#175 Le 15/08/2013, à 12:45
- F50
Re : A quoi ressemble votre environnement -- Printemps/été 2013
J'ai déjà vu ce spectrum3d mais le top serait que ce soit intégré dans le bureau sans cadre comme un conky. Je vais poster pour voir ce qu'en pense Didier T, le spécialiste conky maison.