Ubuntu-fr

loucho

[Résolu] Boot lent, bloque pendant 1 min

Bonjour tout le monde,

Cela fait à peine 1 semaine que je viens d'installer Feisty. Tout est parfait, j'ai utilisé ce forum en long en large pour mes petits soucis de config video, wifi et son. Ce forum est génial on y trouve toujours une solution. Encore bravo !!!!
En revenche je souhaiterai vous  soumettre un petit soucis lors de du boot. Pendant près de 1mn30 il fige puis up il démarre, bon bref un boot de plus de 2mn.
Ma carte mere est une 939 dual sata 2 de chez asrock. (j'ai lu un peu partout qu'il y a des soucis/bugs avec cette carte https://bugs.launchpad.net/ubuntu/+sour … +bug/65529 ).

Donc voici mon kern.log

Jul 24 07:11:17 loucho-desktop kernel: Inspecting /boot/System.map-2.6.20-16-generic
Jul 24 07:11:17 loucho-desktop kernel: Loaded 24977 symbols from /boot/System.map-2.6.20-16-generic.
Jul 24 07:11:17 loucho-desktop kernel: Symbols match kernel version 2.6.20.
Jul 24 07:11:17 loucho-desktop kernel: No module symbols loaded - kernel modules not enabled. 
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] BIOS-provided physical RAM map:
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] sanitize start
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] sanitize end
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] copy_e820_map() type is E820_RAM
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] copy_e820_map() start: 00000000000e8000 size: 0000000000018000 end: 0000000000100000 type: 2
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003feb0000 end: 000000003ffb0000 type: 1
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] copy_e820_map() type is E820_RAM
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] copy_e820_map() start: 000000003ffb0000 size: 0000000000010000 end: 000000003ffc0000 type: 3
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] copy_e820_map() start: 000000003ffc0000 size: 0000000000030000 end: 000000003fff0000 type: 4
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000010000 end: 0000000040000000 type: 2
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] copy_e820_map() start: 00000000ff7c0000 size: 0000000000840000 end: 0000000100000000 type: 2
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]  BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]  BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]  BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]  BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] 127MB HIGHMEM available.
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] 896MB LOWMEM available.
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] found SMP MP-table at 000ff780
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] Entering add_active_range(0, 0, 262064) 0 entries of 256 used
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] Zone PFN ranges:
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]   DMA             0 ->     4096
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]   Normal       4096 ->   229376
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]   HighMem    229376 ->   262064
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] early_node_map[1] active PFN ranges
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]     0:        0 ->   262064
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] On node 0 totalpages: 262064
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]   DMA zone: 0 pages reserved
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]   Normal zone: 1760 pages used for memmap
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]   HighMem zone: 255 pages used for memmap
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000]   HighMem zone: 32433 pages, LIFO batch:7
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] DMI 2.3 present.
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f9a50
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: RSDT (v001 A M I  OEMRSDT  0x09000625 MSFT 0x00000097) @ 0x3ffb0000
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: FADT (v002 A M I  OEMFACP  0x09000625 MSFT 0x00000097) @ 0x3ffb0200
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: MADT (v001 A M I  OEMAPIC  0x09000625 MSFT 0x00000097) @ 0x3ffb0390
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: MCFG (v001 A M I  OEMMCFG  0x09000625 MSFT 0x00000097) @ 0x3ffb0400
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: OEMB (v001 A M I  AMI_OEM  0x09000625 MSFT 0x00000097) @ 0x3ffc0040
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: DSDT (v001  939M2 939M2222 0x00000222 INTL 0x02002026) @ 0x00000000
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x808
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] Processor #0 15:15 APIC version 16
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] IOAPIC[1]: apic_id 2, version 17, address 0xfec10000, GSI 24-39
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: IRQ0 used by override.
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: IRQ2 used by override.
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] ACPI: IRQ9 used by override.
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 2 I/O APICs
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf7c0000)
Jul 24 07:11:17 loucho-desktop kernel: [    0.000000] Detected 1800.153 MHz processor.
Jul 24 07:11:17 loucho-desktop kernel: [   49.467442] Built 1 zonelists.  Total pages: 260017
Jul 24 07:11:17 loucho-desktop kernel: [   49.467446] Kernel command line: root=UUID=dc13640d-2203-415e-891e-1146fa9aed24 ro quiet splash
Jul 24 07:11:17 loucho-desktop kernel: [   49.467593] mapped APIC to ffffd000 (fee00000)
Jul 24 07:11:17 loucho-desktop kernel: [   49.467595] mapped IOAPIC to ffffc000 (fec00000)
Jul 24 07:11:17 loucho-desktop kernel: [   49.467598] mapped IOAPIC to ffffb000 (fec10000)
Jul 24 07:11:17 loucho-desktop kernel: [   49.467602] Enabling fast FPU save and restore... done.
Jul 24 07:11:17 loucho-desktop kernel: [   49.467605] Enabling unmasked SIMD FPU exception support... done.
Jul 24 07:11:17 loucho-desktop kernel: [   49.467616] Initializing CPU#0
Jul 24 07:11:17 loucho-desktop kernel: [   49.467676] PID hash table entries: 4096 (order: 12, 16384 bytes)
Jul 24 07:11:17 loucho-desktop kernel: [   49.469977] Console: colour VGA+ 80x25
Jul 24 07:11:17 loucho-desktop kernel: [   49.470674] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jul 24 07:11:17 loucho-desktop kernel: [   49.471269] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul 24 07:11:17 loucho-desktop kernel: [   49.497061] Memory: 1028056k/1048256k available (1992k kernel code, 19464k reserved, 900k data, 328k init, 130752k highmem)
Jul 24 07:11:17 loucho-desktop kernel: [   49.497072] virtual kernel memory layout:
Jul 24 07:11:17 loucho-desktop kernel: [   49.497073]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
Jul 24 07:11:17 loucho-desktop kernel: [   49.497074]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Jul 24 07:11:17 loucho-desktop kernel: [   49.497076]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
Jul 24 07:11:17 loucho-desktop kernel: [   49.497077]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Jul 24 07:11:17 loucho-desktop kernel: [   49.497079]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
Jul 24 07:11:17 loucho-desktop kernel: [   49.497080]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
Jul 24 07:11:17 loucho-desktop kernel: [   49.497081]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
Jul 24 07:11:17 loucho-desktop kernel: [   49.497085] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jul 24 07:11:17 loucho-desktop kernel: [   49.575523] Calibrating delay using timer specific routine.. 3602.70 BogoMIPS (lpj=7205412)
Jul 24 07:11:17 loucho-desktop kernel: [   49.575573] Security Framework v1.0.0 initialized
Jul 24 07:11:17 loucho-desktop kernel: [   49.575584] SELinux:  Disabled at boot.
Jul 24 07:11:17 loucho-desktop kernel: [   49.575601] Mount-cache hash table entries: 512
Jul 24 07:11:17 loucho-desktop kernel: [   49.575783] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
Jul 24 07:11:17 loucho-desktop kernel: [   49.575792] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jul 24 07:11:17 loucho-desktop kernel: [   49.575795] CPU: L2 Cache: 512K (64 bytes/line)
Jul 24 07:11:17 loucho-desktop kernel: [   49.575798] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
Jul 24 07:11:17 loucho-desktop kernel: [   49.575812] Compat vDSO mapped to ffffe000.
Jul 24 07:11:17 loucho-desktop kernel: [   49.575818] Remapping vsyscall page to ffffe000
Jul 24 07:11:17 loucho-desktop kernel: [   49.575831] Checking 'hlt' instruction... OK.
Jul 24 07:11:17 loucho-desktop kernel: [   49.591709] SMP alternatives: switching to UP code
Jul 24 07:11:17 loucho-desktop kernel: [   49.592067] Freeing SMP alternatives: 11k freed
Jul 24 07:11:17 loucho-desktop kernel: [   49.592321] Early unpacking initramfs... done
Jul 24 07:11:17 loucho-desktop kernel: [   49.906447] ACPI: Core revision 20060707
Jul 24 07:11:17 loucho-desktop kernel: [   49.907018] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
Jul 24 07:11:17 loucho-desktop kernel: [   49.908861] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 02
Jul 24 07:11:17 loucho-desktop kernel: [   49.908878] Total of 1 processors activated (3602.70 BogoMIPS).
Jul 24 07:11:17 loucho-desktop kernel: [   49.909418] ENABLING IO-APIC IRQs
Jul 24 07:11:17 loucho-desktop kernel: [   49.909659] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jul 24 07:11:17 loucho-desktop kernel: [   50.054851] Brought up 1 CPUs
Jul 24 07:11:17 loucho-desktop kernel: [   50.055071] Booting paravirtualized kernel on bare hardware
Jul 24 07:11:17 loucho-desktop kernel: [   50.055130] Time:  7:09:40  Date: 06/24/107
Jul 24 07:11:17 loucho-desktop kernel: [   50.055161] NET: Registered protocol family 16
Jul 24 07:11:17 loucho-desktop kernel: [   50.055248] EISA bus registered
Jul 24 07:11:17 loucho-desktop kernel: [   50.055252] ACPI: bus type pci registered
Jul 24 07:11:17 loucho-desktop kernel: [   50.056153] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
Jul 24 07:11:17 loucho-desktop kernel: [   50.056155] PCI: Using configuration type 1
Jul 24 07:11:17 loucho-desktop kernel: [   50.056157] Setting up standard PCI resources
Jul 24 07:11:17 loucho-desktop kernel: [   50.067691] ACPI: Interpreter enabled
Jul 24 07:11:17 loucho-desktop kernel: [   50.067693] ACPI: Using IOAPIC for interrupt routing
Jul 24 07:11:17 loucho-desktop kernel: [   50.068477] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 24 07:11:17 loucho-desktop kernel: [   50.068482] PCI: Probing PCI hardware (bus 00)
Jul 24 07:11:17 loucho-desktop kernel: [   50.068950] PCI quirk: region 0800-083f claimed by ali7101 ACPI
Jul 24 07:11:17 loucho-desktop kernel: [   50.069321] Boot video device is 0000:01:00.0
Jul 24 07:11:17 loucho-desktop kernel: [   50.069760] PCI: Transparent bridge - 0000:00:06.0
Jul 24 07:11:17 loucho-desktop kernel: [   50.069806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 24 07:11:17 loucho-desktop kernel: [   50.085488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
Jul 24 07:11:17 loucho-desktop kernel: [   50.085730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
Jul 24 07:11:17 loucho-desktop kernel: [   50.091375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
Jul 24 07:11:17 loucho-desktop kernel: [   50.091572] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
Jul 24 07:11:17 loucho-desktop kernel: [   50.091784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT]
Jul 24 07:11:17 loucho-desktop kernel: [   50.092396] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
Jul 24 07:11:17 loucho-desktop kernel: [   50.092681] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jul 24 07:11:17 loucho-desktop kernel: [   50.092971] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jul 24 07:11:17 loucho-desktop kernel: [   50.093253] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
Jul 24 07:11:17 loucho-desktop kernel: [   50.093534] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jul 24 07:11:17 loucho-desktop kernel: [   50.093816] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jul 24 07:11:17 loucho-desktop kernel: [   50.094098] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jul 24 07:11:17 loucho-desktop kernel: [   50.094379] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
Jul 24 07:11:17 loucho-desktop kernel: [   50.094711] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jul 24 07:11:17 loucho-desktop kernel: [   50.094788] Linux Plug and Play Support v0.97 (c) Adam Belay
Jul 24 07:11:17 loucho-desktop kernel: [   50.094800] pnp: PnP ACPI init
Jul 24 07:11:17 loucho-desktop kernel: [   50.099150] pnp: PnP ACPI: found 15 devices
Jul 24 07:11:17 loucho-desktop kernel: [   50.099154] PnPBIOS: Disabled by ACPI PNP
Jul 24 07:11:17 loucho-desktop kernel: [   50.099215] PCI: Using ACPI for IRQ routing
Jul 24 07:11:17 loucho-desktop kernel: [   50.099218] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jul 24 07:11:17 loucho-desktop kernel: [   50.108779] NET: Registered protocol family 8
Jul 24 07:11:17 loucho-desktop kernel: [   50.108781] NET: Registered protocol family 20
Jul 24 07:11:17 loucho-desktop kernel: [   50.109428] pnp: 00:0d: ioport range 0x290-0x29f has been reserved
Jul 24 07:11:17 loucho-desktop kernel: [   50.109659] PCI: Bridge: 0000:00:01.0
Jul 24 07:11:17 loucho-desktop kernel: [   50.109661]   IO window: disabled.
Jul 24 07:11:17 loucho-desktop kernel: [   50.109665]   MEM window: fa600000-fe6fffff
Jul 24 07:11:17 loucho-desktop kernel: [   50.109668]   PREFETCH window: afe00000-cfdfffff
Jul 24 07:11:17 loucho-desktop kernel: [   50.109672] PCI: Bridge: 0000:00:02.0
Jul 24 07:11:17 loucho-desktop kernel: [   50.109673]   IO window: disabled.
Jul 24 07:11:17 loucho-desktop kernel: [   50.109676]   MEM window: fe700000-fe7fffff
Jul 24 07:11:17 loucho-desktop kernel: [   50.109679]   PREFETCH window: disabled.
Jul 24 07:11:17 loucho-desktop kernel: [   50.109682] PCI: Bridge: 0000:00:03.0
Jul 24 07:11:17 loucho-desktop kernel: [   50.109684]   IO window: d000-dfff
Jul 24 07:11:17 loucho-desktop kernel: [   50.109687]   MEM window: fe800000-fe8fffff
Jul 24 07:11:17 loucho-desktop kernel: [   50.109690]   PREFETCH window: disabled.
Jul 24 07:11:17 loucho-desktop kernel: [   50.109693] PCI: Bridge: 0000:00:05.0
Jul 24 07:11:17 loucho-desktop kernel: [   50.109694]   IO window: disabled.
Jul 24 07:11:17 loucho-desktop kernel: [   50.109699]   MEM window: fe900000-fe9fffff
Jul 24 07:11:17 loucho-desktop kernel: [   50.109702]   PREFETCH window: disabled.
Jul 24 07:11:17 loucho-desktop kernel: [   50.109707] PCI: Bridge: 0000:00:06.0
Jul 24 07:11:17 loucho-desktop kernel: [   50.109708]   IO window: disabled.
Jul 24 07:11:17 loucho-desktop kernel: [   50.109713]   MEM window: fea00000-feafffff
Jul 24 07:11:17 loucho-desktop kernel: [   50.109717]   PREFETCH window: cfe00000-cfefffff
Jul 24 07:11:17 loucho-desktop kernel: [   50.109737] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 16
Jul 24 07:11:17 loucho-desktop kernel: [   50.109744] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jul 24 07:11:17 loucho-desktop kernel: [   50.109751] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 17
Jul 24 07:11:17 loucho-desktop kernel: [   50.109755] PCI: Setting latency timer of device 0000:00:02.0 to 64
Jul 24 07:11:17 loucho-desktop kernel: [   50.109763] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 39 (level, low) -> IRQ 18
Jul 24 07:11:17 loucho-desktop kernel: [   50.109767] PCI: Setting latency timer of device 0000:00:03.0 to 64
Jul 24 07:11:17 loucho-desktop kernel: [   50.109773] PCI: Setting latency timer of device 0000:00:05.0 to 64
Jul 24 07:11:17 loucho-desktop kernel: [   50.109780] PCI: Setting latency timer of device 0000:00:06.0 to 64
Jul 24 07:11:17 loucho-desktop kernel: [   50.109809] NET: Registered protocol family 2
Jul 24 07:11:17 loucho-desktop kernel: [   50.146788] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 24 07:11:17 loucho-desktop kernel: [   50.147040] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jul 24 07:11:17 loucho-desktop kernel: [   50.148562] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jul 24 07:11:17 loucho-desktop kernel: [   50.149381] TCP: Hash tables configured (established 131072 bind 65536)
Jul 24 07:11:17 loucho-desktop kernel: [   50.149384] TCP reno registered
Jul 24 07:11:17 loucho-desktop kernel: [   50.158823] checking if image is initramfs... it is
Jul 24 07:11:17 loucho-desktop kernel: [   50.776668] Freeing initrd memory: 6773k freed
Jul 24 07:11:17 loucho-desktop kernel: [   50.777182] audit: initializing netlink socket (disabled)
Jul 24 07:11:17 loucho-desktop kernel: [   50.777200] audit(1185260980.388:1): initialized
Jul 24 07:11:17 loucho-desktop kernel: [   50.777270] highmem bounce pool size: 64 pages
Jul 24 07:11:17 loucho-desktop kernel: [   50.777335] VFS: Disk quotas dquot_6.5.1
Jul 24 07:11:17 loucho-desktop kernel: [   50.777356] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jul 24 07:11:17 loucho-desktop kernel: [   50.777420] io scheduler noop registered
Jul 24 07:11:17 loucho-desktop kernel: [   50.777422] io scheduler anticipatory registered
Jul 24 07:11:17 loucho-desktop kernel: [   50.777424] io scheduler deadline registered
Jul 24 07:11:17 loucho-desktop kernel: [   50.777433] io scheduler cfq registered (default)
Jul 24 07:11:17 loucho-desktop kernel: [   50.837881] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jul 24 07:11:17 loucho-desktop kernel: [   50.837907] assign_interrupt_mode Found MSI capability
Jul 24 07:11:17 loucho-desktop kernel: [   50.837911] Allocate Port Service[0000:00:01.0:pcie00]
Jul 24 07:11:17 loucho-desktop kernel: [   50.837976] PCI: Setting latency timer of device 0000:00:02.0 to 64
Jul 24 07:11:17 loucho-desktop kernel: [   50.838001] assign_interrupt_mode Found MSI capability
Jul 24 07:11:17 loucho-desktop kernel: [   50.838004] Allocate Port Service[0000:00:02.0:pcie00]
Jul 24 07:11:17 loucho-desktop kernel: [   50.838066] PCI: Setting latency timer of device 0000:00:03.0 to 64
Jul 24 07:11:17 loucho-desktop kernel: [   50.838091] assign_interrupt_mode Found MSI capability
Jul 24 07:11:17 loucho-desktop kernel: [   50.838093] Allocate Port Service[0000:00:03.0:pcie00]
Jul 24 07:11:17 loucho-desktop kernel: [   50.838213] isapnp: Scanning for PnP cards...
Jul 24 07:11:17 loucho-desktop kernel: [   51.191652] isapnp: No Plug & Play device found
Jul 24 07:11:17 loucho-desktop kernel: [   51.215693] Real Time Clock Driver v1.12ac
Jul 24 07:11:17 loucho-desktop kernel: [   51.215748] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jul 24 07:11:17 loucho-desktop kernel: [   51.215872] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 24 07:11:17 loucho-desktop kernel: [   51.216584] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 24 07:11:17 loucho-desktop kernel: [   51.216788] mice: PS/2 mouse device common for all mice
Jul 24 07:11:17 loucho-desktop kernel: [   51.217310] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Jul 24 07:11:17 loucho-desktop kernel: [   51.217541] input: Macintosh mouse button emulation as /class/input/input0
Jul 24 07:11:17 loucho-desktop kernel: [   51.217569] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jul 24 07:11:17 loucho-desktop kernel: [   51.217573] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jul 24 07:11:17 loucho-desktop kernel: [   51.217773] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Jul 24 07:11:17 loucho-desktop kernel: [   51.220247] serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 24 07:11:17 loucho-desktop kernel: [   51.220252] serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 24 07:11:17 loucho-desktop kernel: [   51.220370] EISA: Probing bus 0 at eisa.0
Jul 24 07:11:17 loucho-desktop kernel: [   51.220409] EISA: Detected 0 cards.
Jul 24 07:11:17 loucho-desktop kernel: [   51.250463] TCP cubic registered
Jul 24 07:11:17 loucho-desktop kernel: [   51.250471] NET: Registered protocol family 1
Jul 24 07:11:17 loucho-desktop kernel: [   51.250493] Using IPI No-Shortcut mode
Jul 24 07:11:17 loucho-desktop kernel: [   51.250559] ACPI: (supports S0 S1 S3 S4 S5)
Jul 24 07:11:17 loucho-desktop kernel: [   51.250600]   Magic number: 15:166:168
Jul 24 07:11:17 loucho-desktop kernel: [   51.250664]   hash matches device ttyq8
Jul 24 07:11:17 loucho-desktop kernel: [   51.251174] Freeing unused kernel memory: 328k freed
Jul 24 07:11:17 loucho-desktop kernel: [   51.253057] Time: tsc clocksource has been installed.
Jul 24 07:11:17 loucho-desktop kernel: [   51.270209] input: AT Translated Set 2 keyboard as /class/input/input1
Jul 24 07:11:17 loucho-desktop kernel: [   52.495178] Capability LSM initialized
Jul 24 07:11:17 loucho-desktop kernel: [   52.535605] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
Jul 24 07:11:17 loucho-desktop kernel: [   53.187229] ieee1394: Initialized config rom entry `ip1394'
Jul 24 07:11:17 loucho-desktop kernel: [   53.188365] ACPI: PCI Interrupt 0000:05:07.0[A] -> GSI 22 (level, low) -> IRQ 19
Jul 24 07:11:17 loucho-desktop kernel: [   53.239239] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[feaff000-feaff7ff]  Max Packet=[2048]  IR/IT contexts=[9/9]
Jul 24 07:11:17 loucho-desktop kernel: [   53.257191] usbcore: registered new interface driver usbfs
Jul 24 07:11:17 loucho-desktop kernel: [   53.257216] usbcore: registered new interface driver hub
Jul 24 07:11:18 loucho-desktop kernel: [   53.257240] usbcore: registered new device driver usb
Jul 24 07:11:18 loucho-desktop kernel: [   53.257931] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jul 24 07:11:18 loucho-desktop kernel: [   53.257971] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 20 (level, low) -> IRQ 20
Jul 24 07:11:18 loucho-desktop kernel: [   53.257986] ohci_hcd 0000:00:13.0: OHCI Host Controller
Jul 24 07:11:18 loucho-desktop kernel: [   53.258201] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
Jul 24 07:11:18 loucho-desktop kernel: [   53.258224] ohci_hcd 0000:00:13.0: irq 20, io mem 0xfebfd000
Jul 24 07:11:18 loucho-desktop kernel: [   53.318806] SCSI subsystem initialized
Jul 24 07:11:18 loucho-desktop kernel: [   53.323508] libata version 2.20 loaded.
Jul 24 07:11:18 loucho-desktop kernel: [   53.342608] usb usb1: configuration #1 chosen from 1 choice
Jul 24 07:11:18 loucho-desktop kernel: [   53.342635] hub 1-0:1.0: USB hub found
Jul 24 07:11:18 loucho-desktop kernel: [   53.342648] hub 1-0:1.0: 3 ports detected
Jul 24 07:11:18 loucho-desktop kernel: [   53.446400] ACPI: PCI Interrupt 0000:00:13.1[b] -> GSI 21 (level, low) -> IRQ 21
Jul 24 07:11:18 loucho-desktop kernel: [   53.446424] ohci_hcd 0000:00:13.1: OHCI Host Controller
Jul 24 07:11:18 loucho-desktop kernel: [   53.446447] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
Jul 24 07:11:18 loucho-desktop kernel: [   53.446470] ohci_hcd 0000:00:13.1: irq 21, io mem 0xfebfc000
Jul 24 07:11:18 loucho-desktop kernel: [   53.505519] usb usb2: configuration #1 chosen from 1 choice
Jul 24 07:11:18 loucho-desktop kernel: [   53.505549] hub 2-0:1.0: USB hub found
Jul 24 07:11:18 loucho-desktop kernel: [   53.505564] hub 2-0:1.0: 3 ports detected
Jul 24 07:11:18 loucho-desktop kernel: [   53.605807] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 22 (level, low) -> IRQ 19
Jul 24 07:11:18 loucho-desktop kernel: [   53.605827] ohci_hcd 0000:00:13.2: OHCI Host Controller
Jul 24 07:11:18 loucho-desktop kernel: [   53.605855] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
Jul 24 07:11:18 loucho-desktop kernel: [   53.605870] ohci_hcd 0000:00:13.2: irq 19, io mem 0xfebfb000
Jul 24 07:11:18 loucho-desktop kernel: [   53.663720] usb usb3: configuration #1 chosen from 1 choice
Jul 24 07:11:18 loucho-desktop kernel: [   53.663746] hub 3-0:1.0: USB hub found
Jul 24 07:11:18 loucho-desktop kernel: [   53.663759] hub 3-0:1.0: 3 ports detected
Jul 24 07:11:18 loucho-desktop kernel: [   53.749489] usb 1-1: new full speed USB device using ohci_hcd and address 2
Jul 24 07:11:18 loucho-desktop kernel: [   53.765833] ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) -> IRQ 22
Jul 24 07:11:18 loucho-desktop kernel: [   53.765849] ehci_hcd 0000:00:13.3: EHCI Host Controller
Jul 24 07:11:18 loucho-desktop kernel: [   53.765881] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
Jul 24 07:11:18 loucho-desktop kernel: [   53.765915] ehci_hcd 0000:00:13.3: debug port 1
Jul 24 07:11:18 loucho-desktop kernel: [   53.789468] ehci_hcd 0000:00:13.3: irq 22, io mem 0xfebfe800
Jul 24 07:11:18 loucho-desktop kernel: [   53.789477] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 24 07:11:18 loucho-desktop kernel: [   53.789578] usb usb4: configuration #1 chosen from 1 choice
Jul 24 07:11:18 loucho-desktop kernel: [   53.789603] hub 4-0:1.0: USB hub found
Jul 24 07:11:18 loucho-desktop kernel: [   53.789613] hub 4-0:1.0: 8 ports detected
Jul 24 07:11:18 loucho-desktop kernel: [   53.893655] ahci 0000:03:00.0: version 2.1
Jul 24 07:11:18 loucho-desktop kernel: [   53.893690] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 35 (level, low) -> IRQ 23
Jul 24 07:11:18 loucho-desktop kernel: [   54.241797] ohci1394: fw-host0: SelfID is inconsistent [0x00000000/0x00000000]
Jul 24 07:11:18 loucho-desktop kernel: [   54.512403] ohci1394: fw-host0: Unhandled interrupt(s) 0x80000000
Jul 24 07:11:18 loucho-desktop kernel: [   54.512412] ieee1394: impossible ack_complete from node 65535 (tcode 4)
Jul 24 07:11:18 loucho-desktop kernel: [   54.512416] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
Jul 24 07:11:18 loucho-desktop kernel: [   54.512480] ohci1394: fw-host0: Unhandled interrupt(s) 0x80000000
Jul 24 07:11:18 loucho-desktop kernel: [   54.660177] usb 4-3: new high speed USB device using ehci_hcd and address 3
Jul 24 07:11:18 loucho-desktop kernel: [   54.795950] usb 4-3: configuration #1 chosen from 1 choice
Jul 24 07:11:18 loucho-desktop kernel: [   54.895856] PCI: Setting latency timer of device 0000:03:00.0 to 64
Jul 24 07:11:18 loucho-desktop kernel: [   54.895867] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
Jul 24 07:11:18 loucho-desktop kernel: [   54.895871] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
Jul 24 07:11:18 loucho-desktop kernel: [   54.896028] ata1: SATA max UDMA/133 cmd 0xf88ac100 ctl 0x00000000 bmdma 0x00000000 irq 23
Jul 24 07:11:18 loucho-desktop kernel: [   54.896041] scsi0 : ahci
Jul 24 07:11:18 loucho-desktop kernel: [   55.035635] usb 4-4: new high speed USB device using ehci_hcd and address 4
Jul 24 07:11:18 loucho-desktop kernel: [   55.172882] usb 4-4: configuration #1 chosen from 1 choice
Jul 24 07:11:18 loucho-desktop kernel: [   55.379157] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 24 07:11:18 loucho-desktop kernel: [   55.420254] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
Jul 24 07:11:18 loucho-desktop kernel: [   55.420260] ata1.00: ATA-7: MAXTOR STM3250820AS, 3.AAE, max UDMA/133
Jul 24 07:11:18 loucho-desktop kernel: [   55.420263] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Jul 24 07:11:18 loucho-desktop kernel: [   55.478468] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
Jul 24 07:11:18 loucho-desktop kernel: [   55.478472] ata1.00: configured for UDMA/133
Jul 24 07:11:18 loucho-desktop kernel: [   55.478607] scsi 0:0:0:0: Direct-Access     ATA      MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
Jul 24 07:11:18 loucho-desktop kernel: [   55.479000] usb 1-1: new full speed USB device using ohci_hcd and address 3
Jul 24 07:11:18 loucho-desktop kernel: [   55.481654] ALI15X3: IDE controller at PCI slot 0000:00:12.0
Jul 24 07:11:18 loucho-desktop kernel: [   55.481670] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 19 (level, low) -> IRQ 24
Jul 24 07:11:18 loucho-desktop kernel: [   55.481682] ALI15X3: chipset revision 199
Jul 24 07:11:18 loucho-desktop kernel: [   55.481684] ALI15X3: not 100%% native mode: will probe irqs later
Jul 24 07:11:18 loucho-desktop kernel: [   55.481703]     ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
Jul 24 07:11:18 loucho-desktop kernel: [   55.481719]     ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
Jul 24 07:11:18 loucho-desktop kernel: [   55.481729] Probing IDE interface ide0...
Jul 24 07:11:18 loucho-desktop kernel: [   55.502823] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Jul 24 07:11:18 loucho-desktop kernel: [   55.502991] sda: Write Protect is off
Jul 24 07:11:18 loucho-desktop kernel: [   55.502994] sda: Mode Sense: 00 3a 00 00
Jul 24 07:11:18 loucho-desktop kernel: [   55.503765] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 24 07:11:18 loucho-desktop kernel: [   55.503827] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Jul 24 07:11:18 loucho-desktop kernel: [   55.503834] sda: Write Protect is off
Jul 24 07:11:18 loucho-desktop kernel: [   55.503836] sda: Mode Sense: 00 3a 00 00
Jul 24 07:11:18 loucho-desktop kernel: [   55.503847] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 24 07:11:18 loucho-desktop kernel: [   55.503850]  sda: sda1 sda2 sda3
Jul 24 07:11:18 loucho-desktop kernel: [   55.539086] sd 0:0:0:0: Attached scsi disk sda
Jul 24 07:11:18 loucho-desktop kernel: [   55.543986] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jul 24 07:11:18 loucho-desktop kernel: [   55.682096] usb 1-1: configuration #1 chosen from 1 choice
Jul 24 07:11:18 loucho-desktop kernel: [   55.685239] usbcore: registered new interface driver libusual
Jul 24 07:11:18 loucho-desktop kernel: [   55.689102] Initializing USB Mass Storage driver...
Jul 24 07:11:18 loucho-desktop kernel: [   55.689186] scsi1 : SCSI emulation for USB Mass Storage devices
Jul 24 07:11:18 loucho-desktop kernel: [   55.689242] usbcore: registered new interface driver usb-storage
Jul 24 07:11:18 loucho-desktop kernel: [   55.689245] USB Mass Storage support registered.
Jul 24 07:11:18 loucho-desktop kernel: [   55.689343] usb-storage: device found at 4
Jul 24 07:11:18 loucho-desktop kernel: [   55.689345] usb-storage: waiting for device to settle before scanning
Jul 24 07:11:18 loucho-desktop kernel: [   55.743052] Attempting manual resume
Jul 24 07:11:18 loucho-desktop kernel: [   55.743056] swsusp: Resume From Partition 8:3
Jul 24 07:11:18 loucho-desktop kernel: [   55.743058] PM: Checking swsusp image.
Jul 24 07:11:18 loucho-desktop kernel: [   55.743233] PM: Resume from disk failed.
Jul 24 07:11:18 loucho-desktop kernel: [   55.766778] hda: WDC WD400BB-00DEA0, ATA DISK drive
Jul 24 07:11:18 loucho-desktop kernel: [   55.782112] kjournald starting.  Commit interval 5 seconds
Jul 24 07:11:18 loucho-desktop kernel: [   55.782122] EXT3-fs: mounted filesystem with ordered data mode.
Jul 24 07:11:18 loucho-desktop kernel: [   56.046381] hdb: SAMSUNG SP1203N, ATA DISK drive
Jul 24 07:11:18 loucho-desktop kernel: [   56.103030] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 24 07:11:18 loucho-desktop kernel: [   56.125174] Probing IDE interface ide1...
Jul 24 07:11:18 loucho-desktop kernel: [   56.861197] hdc: _NEC DVD_RW ND-4550A, ATAPI CD/DVD-ROM drive
Jul 24 07:11:18 loucho-desktop kernel: [   57.532405] ide1 at 0x170-0x177,0x376 on irq 15
Jul 24 07:11:18 loucho-desktop kernel: [   60.680486] usb-storage: device scan complete
Jul 24 07:11:18 loucho-desktop kernel: [   60.683466] scsi 1:0:0:0: Direct-Access     EPSON    Stylus Storage   1.00 PQ: 0 ANSI: 2
Jul 24 07:11:18 loucho-desktop kernel: [   60.687848] sd 1:0:0:0: Attached scsi removable disk sdb
Jul 24 07:11:18 loucho-desktop kernel: [   60.687880] sd 1:0:0:0: Attached scsi generic sg1 type 0
Jul 24 07:11:18 loucho-desktop kernel: [   63.559186] Linux agpgart interface v0.102 (c) Dave Jones
Jul 24 07:11:18 loucho-desktop kernel: [   63.591580] agpgart: Unsupported ALi chipset (device id: 1689)
Jul 24 07:11:18 loucho-desktop kernel: [   63.600406] agpgart: Detected AGP bridge 20
Jul 24 07:11:18 loucho-desktop kernel: [   63.600424] Setting up ULi AGP.
Jul 24 07:11:18 loucho-desktop kernel: [   63.605760] agpgart: AGP aperture is 128M @ 0xd8000000
Jul 24 07:11:18 loucho-desktop kernel: [   63.609824] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Jul 24 07:11:18 loucho-desktop kernel: [   63.609889] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 17 (level, low) -> IRQ 25
Jul 24 07:11:18 loucho-desktop kernel: [   63.631522] eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:3f:d7:a7, irq 25.
Jul 24 07:11:18 loucho-desktop kernel: [   63.888314] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jul 24 07:11:18 loucho-desktop kernel: [   63.905899] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jul 24 07:11:18 loucho-desktop kernel: [   63.931696] Linux video capture interface: v2.00
Jul 24 07:11:18 loucho-desktop kernel: [   63.967564] bttv: driver version 0.9.16 loaded
Jul 24 07:11:18 loucho-desktop kernel: [   63.967570] bttv: using 8 buffers with 2080k (520 pages) each for capture
Jul 24 07:11:18 loucho-desktop kernel: [   63.967636] bttv: Bt8xx card found (0).
Jul 24 07:11:18 loucho-desktop kernel: [   63.967660] ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 20 (level, low) -> IRQ 20
Jul 24 07:11:18 loucho-desktop kernel: [   63.967672] bttv0: Bt878 (rev 17) at 0000:05:05.0, irq: 20, latency: 32, mmio: 0xcfeff000
Jul 24 07:11:18 loucho-desktop kernel: [   63.967683] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
Jul 24 07:11:18 loucho-desktop kernel: [   63.967687] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
Jul 24 07:11:18 loucho-desktop kernel: [   63.967723] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
Jul 24 07:11:18 loucho-desktop kernel: [   63.970208] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
Jul 24 07:11:18 loucho-desktop kernel: [   64.000863] tveeprom 0-0050: The eeprom says no radio is present, but the tuner type
Jul 24 07:11:18 loucho-desktop kernel: [   64.000866] tveeprom 0-0050: indicates otherwise. I will assume that radio is present.
Jul 24 07:11:18 loucho-desktop kernel: [   64.000870] tveeprom 0-0050: Hauppauge model 44809, rev E1A5, serial# 8283613
Jul 24 07:11:18 loucho-desktop kernel: [   64.000873] tveeprom 0-0050: tuner model is TCL MPE05-2 (idx 105, type 38)
Jul 24 07:11:18 loucho-desktop kernel: [   64.000876] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
Jul 24 07:11:18 loucho-desktop kernel: [   64.000879] tveeprom 0-0050: audio processor is None (idx 0)
Jul 24 07:11:18 loucho-desktop kernel: [   64.000881] tveeprom 0-0050: decoder processor is BT878 (idx 14)
Jul 24 07:11:18 loucho-desktop kernel: [   64.000883] tveeprom 0-0050: has radio, has no IR receiver, has no IR transmitter
Jul 24 07:11:18 loucho-desktop kernel: [   64.000886] bttv0: Hauppauge eeprom indicates model#44809
Jul 24 07:11:18 loucho-desktop kernel: [   64.000889] bttv0: using tuner=38
Jul 24 07:11:18 loucho-desktop kernel: [   64.000893] bttv0: i2c: checking for MSP34xx @ 0x80... not found
Jul 24 07:11:18 loucho-desktop kernel: [   64.001576] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Jul 24 07:11:18 loucho-desktop kernel: [   64.002256] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Jul 24 07:11:18 loucho-desktop kernel: [   64.025664] bttv0: i2c: checking for TDA9887 @ 0x86... found
Jul 24 07:11:18 loucho-desktop kernel: [   64.051356] tuner 0-0043: chip found @ 0x86 (bt878 #0 [sw])
Jul 24 07:11:18 loucho-desktop kernel: [   64.051397] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
Jul 24 07:11:18 loucho-desktop kernel: [   64.053735] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
Jul 24 07:11:18 loucho-desktop kernel: [   64.053765] tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
Jul 24 07:11:18 loucho-desktop kernel: [   64.053768] tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
Jul 24 07:11:18 loucho-desktop kernel: [   64.077657] bttv0: registered device video0
Jul 24 07:11:18 loucho-desktop kernel: [   64.077689] bttv0: registered device vbi0
Jul 24 07:11:18 loucho-desktop kernel: [   64.077713] bttv0: registered device radio0
Jul 24 07:11:18 loucho-desktop kernel: [   64.077738] bttv0: PLL: 28636363 => 35468950 .. ok
Jul 24 07:11:18 loucho-desktop kernel: [   64.271541] ali1563: SMBus control = 0403
Jul 24 07:11:18 loucho-desktop kernel: [   64.271593] ali1563_probe: Returning 0
Jul 24 07:11:18 loucho-desktop kernel: [   64.282330] ali15x3_smbus 0000:00:07.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
Jul 24 07:11:18 loucho-desktop kernel: [   64.282337] ali15x3_smbus 0000:00:07.1: ALI15X3 not detected, module not inserted.
Jul 24 07:11:18 loucho-desktop kernel: [   64.288886] ali1535_smbus 0000:00:07.1: ALI1535_smb region uninitialized - upgrade BIOS?
Jul 24 07:11:18 loucho-desktop kernel: [   64.288890] ali1535_smbus 0000:00:07.1: ALI1535 not detected, module not inserted.
Jul 24 07:11:18 loucho-desktop kernel: [   64.914296] nvidia: module license 'NVIDIA' taints kernel.
Jul 24 07:11:18 loucho-desktop kernel: [   65.168696] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 25 (level, low) -> IRQ 26
Jul 24 07:11:18 loucho-desktop kernel: [   65.168707] PCI: Setting latency timer of device 0000:01:00.0 to 64
Jul 24 07:11:18 loucho-desktop kernel: [   65.169096] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.11  Wed Jun 13 18:21:22 PDT 2007
Jul 24 07:11:18 loucho-desktop kernel: [   65.179929] input: PC Speaker as /class/input/input2
Jul 24 07:11:18 loucho-desktop kernel: [   65.206888] parport: PnPBIOS parport detected.
Jul 24 07:11:18 loucho-desktop kernel: [   65.207003] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Jul 24 07:11:18 loucho-desktop kernel: [   65.251542] hda: max request size: 128KiB
Jul 24 07:11:18 loucho-desktop kernel: [   65.252513] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
Jul 24 07:11:18 loucho-desktop kernel: [   65.252520] hda: cache flushes not supported
Jul 24 07:11:18 loucho-desktop kernel: [   65.252566]  hda: hda1
Jul 24 07:11:18 loucho-desktop kernel: [   65.280087] hdb: max request size: 512KiB
Jul 24 07:11:18 loucho-desktop kernel: [   65.280174] hdb: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(133)
Jul 24 07:11:18 loucho-desktop kernel: [   65.280371] hdb: cache flushes supported
Jul 24 07:11:18 loucho-desktop kernel: [   65.280402]  hdb: hdb1 < hdb5 >
Jul 24 07:11:18 loucho-desktop kernel: [   65.317606] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jul 24 07:11:18 loucho-desktop kernel: [   65.317617] Uniform CD-ROM driver Revision: 3.20
Jul 24 07:11:18 loucho-desktop kernel: [   65.533318] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 27
Jul 24 07:11:18 loucho-desktop kernel: [   65.785597] usbcore: registered new interface driver snd-usb-audio
Jul 24 07:11:18 loucho-desktop kernel: [   65.791121] ubuntu/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(ZC3XX) 
Jul 24 07:11:18 loucho-desktop kernel: [   65.899276] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x081A
Jul 24 07:11:18 loucho-desktop kernel: [   66.076943] input: ImExPS/2 Logitech MX Mouse as /class/input/input3
Jul 24 07:11:18 loucho-desktop kernel: [   66.547024] AC'97 1 does not respond - RESET
Jul 24 07:11:18 loucho-desktop kernel: [   66.547598] AC'97 1 access is not valid [0xffffffff], removing mixer.
Jul 24 07:11:18 loucho-desktop kernel: [   66.547604] Unable to initialize codec #1
Jul 24 07:11:18 loucho-desktop kernel: [   66.602992] intel8x0_measure_ac97_clock: measured 54874 usecs
Jul 24 07:11:18 loucho-desktop kernel: [   66.602996] intel8x0: clocking to 48000
Jul 24 07:11:18 loucho-desktop kernel: [   66.603746] ACPI: PCI Interrupt 0000:05:05.1[A] -> GSI 20 (level, low) -> IRQ 20
Jul 24 07:11:18 loucho-desktop kernel: [   66.636720] bt878: AUDIO driver version 0.0.0 loaded
Jul 24 07:11:18 loucho-desktop kernel: [   66.655300] p54: LM86 firmware
Jul 24 07:11:18 loucho-desktop kernel: [   66.883856] usbcore: registered new interface driver gspca
Jul 24 07:11:18 loucho-desktop kernel: [   66.883862] ubuntu/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
Jul 24 07:11:18 loucho-desktop kernel: [   66.883987] usbcore: registered new interface driver usblp
Jul 24 07:11:18 loucho-desktop kernel: [   66.883990] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Jul 24 07:11:18 loucho-desktop kernel: [   67.243509] NET: Registered protocol family 17
Jul 24 07:11:18 loucho-desktop kernel: [   67.653545] prism54usb: probe of 4-3:1.0 failed with error -110
Jul 24 07:11:18 loucho-desktop kernel: [   67.653564] usbcore: registered new interface driver prism54usb
Jul 24 07:11:18 loucho-desktop kernel: [   67.800328] fuse init (API version 7.8)
Jul 24 07:11:18 loucho-desktop kernel: [   67.834762] lp0: using parport0 (interrupt-driven).
Jul 24 07:11:18 loucho-desktop kernel: [   67.870045] Adding 1951888k swap on /dev/disk/by-uuid/048bc03c-e5c1-4cb2-80eb-e11cb5e56f97.  Priority:-1 extents:1 across:1951888k
Jul 24 07:11:18 loucho-desktop kernel: [   68.044183] EXT3 FS on sda2, internal journal
Jul 24 07:11:18 loucho-desktop kernel: [   68.980065] uli526x: eth0 NIC Link is Down
Jul 24 07:11:18 loucho-desktop kernel: [   84.668366] ndiswrapper version 1.38 loaded (preempt=no,smp=yes)
Jul 24 07:11:18 loucho-desktop kernel: [   84.876609] usb 4-3: reset high speed USB device using ehci_hcd and address 3
Jul 24 07:11:18 loucho-desktop kernel: [   85.019877] ndiswrapper: driver wlanuig (Sagem SA,06/03/2004, 3.0.18.2) loaded
Jul 24 07:11:18 loucho-desktop kernel: [   86.418497] wlan0: ethernet device 00:60:b3:be:4d:34 using NDIS driver: wlanuig, version: 0x30012, NDIS version: 0x501, vendor: 'Sagem XG703 USB 802.11g', 0CDE:0008.F.conf
Jul 24 07:11:18 loucho-desktop kernel: [   86.418532] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
Jul 24 07:11:18 loucho-desktop kernel: [   86.420680] usbcore: registered new interface driver ndiswrapper
Jul 24 07:11:18 loucho-desktop kernel: [  108.928806] NET: Registered protocol family 10
Jul 24 07:11:18 loucho-desktop kernel: [  108.928924] lo: Disabled Privacy Extensions
Jul 24 07:11:18 loucho-desktop kernel: [  108.928998] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jul 24 07:11:18 loucho-desktop kernel: [  108.929000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jul 24 07:11:18 loucho-desktop kernel: [  146.367930] Using specific hotkey driver
Jul 24 07:11:18 loucho-desktop kernel: [  146.414474] ibm_acpi: ec object not found
Jul 24 07:11:18 loucho-desktop kernel: [  146.604560] input: Power Button (FF) as /class/input/input4
Jul 24 07:11:18 loucho-desktop kernel: [  146.609501] ACPI: Power Button (FF) [PWRF]
Jul 24 07:11:18 loucho-desktop kernel: [  146.643061] input: Power Button (CM) as /class/input/input5
Jul 24 07:11:18 loucho-desktop kernel: [  146.647949] ACPI: Power Button (CM) [PWRB]
Jul 24 07:11:18 loucho-desktop kernel: [  146.687998] No dock devices found.
Jul 24 07:11:18 loucho-desktop kernel: [  146.743092] pcc_acpi: loading...
Jul 24 07:11:18 loucho-desktop kernel: [  147.000050] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
Jul 24 07:11:18 loucho-desktop kernel: [  147.000091] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6
Jul 24 07:11:18 loucho-desktop kernel: [  147.000094] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
Jul 24 07:11:28 loucho-desktop kernel: [  158.459359] ppdev: user-space parallel port driver
Jul 24 07:11:29 loucho-desktop kernel: [  159.109296] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
Jul 24 07:11:29 loucho-desktop kernel: [  159.109302] apm: overridden by ACPI.
Jul 24 07:11:29 loucho-desktop kernel: [  159.261684] Bluetooth: Core ver 2.11
Jul 24 07:11:29 loucho-desktop kernel: [  159.261749] NET: Registered protocol family 31
Jul 24 07:11:29 loucho-desktop kernel: [  159.261751] Bluetooth: HCI device and connection manager initialized
Jul 24 07:11:29 loucho-desktop kernel: [  159.261755] Bluetooth: HCI socket layer initialized
Jul 24 07:11:29 loucho-desktop kernel: [  159.299138] Bluetooth: L2CAP ver 2.8
Jul 24 07:11:29 loucho-desktop kernel: [  159.299142] Bluetooth: L2CAP socket layer initialized
Jul 24 07:11:29 loucho-desktop kernel: [  159.424485] Bluetooth: RFCOMM socket layer initialized
Jul 24 07:11:29 loucho-desktop kernel: [  159.424501] Bluetooth: RFCOMM TTY layer initialized
Jul 24 07:11:29 loucho-desktop kernel: [  159.424503] Bluetooth: RFCOMM ver 1.8
Jul 24 07:11:33 loucho-desktop kernel: [  113.744000] Time: acpi_pm clocksource has been installed.
Jul 24 07:20:16 loucho-desktop kernel: [  636.228000] ISO 9660 Extensions: Microsoft Joliet Level 1
Jul 24 07:20:16 loucho-desktop kernel: [  636.316000] ISOFS: changing to secondary root
Jul 24 07:20:23 loucho-desktop kernel: [  643.092000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jul 24 07:20:43 loucho-desktop kernel: [  664.432000] wlan0: no IPv6 routers present

Ca bloque ici :

Jul 24 07:11:18 loucho-desktop kernel: [   66.547604] Unable to initialize codec #1

Donc je me suis demandé si ce n'est pas un souci de ma carte son, je l'ai donc désactivé, mais bon tjs pareil. Sauf que ça bloque la :

Jul 24 07:11:18 loucho-desktop kernel: [   64.282330] ali15x3_smbus 0000:00:07.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
Jul 24 07:11:18 loucho-desktop kernel: [   64.282337] ali15x3_smbus 0000:00:07.1: ALI15X3 not detected, module not inserted.
Jul 24 07:11:18 loucho-desktop kernel: [   64.288886] ali1535_smbus 0000:00:07.1: ALI1535_smb region uninitialized - upgrade BIOS?
Jul 24 07:11:18 loucho-desktop kernel: [   64.288890] ali1535_smbus 0000:00:07.1: ALI1535 not detected, module not inserted.

En fait je suis un peu perdu. Je me demande vu que le ali15x3, 1535 ne sont pas initialisés ou détectés, ne serait il pas possible de les blacklister Pendant le boot ? Est ce que cela ne resoudrait pas ma lenteur de boot.
Voilà j'espère avoir été assez clair

A+

Dernière modification par loucho (Le 29/07/2007, à 16:17)

foustala

Re : [Résolu] Boot lent, bloque pendant 1 min

Comment se passe le boot en utilisant le mode recovery depuis GRUB?

littlewing

Re : [Résolu] Boot lent, bloque pendant 1 min

En fait je suis un peu perdu. Je me demande vu que le ali15x3, 1535 ne sont pas initialisés ou détectés, ne serait il pas possible de les blacklister Pendant le boot ?

tu peux essayer d ajouter le  fichier /etc/modprobe.d/blacklist-ali1535 avec le contenu suivant:

#verifier le nom du module
blacklist alim15x3.

Dernière modification par littlewing (Le 26/07/2007, à 14:53)

---

[Ubuntu 12.10 32 bits /nvidia]
Mes notes et tutoriaux sur UBUNTU/LINUX

loucho

Re : [Résolu] Boot lent, bloque pendant 1 min

Comment se passe le boot en utilisant le mode recovery depuis GRUB?

Bonjour,

En fait en passant pas le mode recovery, il bloque pendant 1'10'' environ sur Network Interface. Serait ce donc la détection de l'interface reseau qui pose souci ? ou alors est ce normal lors d'un boot en recovery...

foustala

Re : [Résolu] Boot lent, bloque pendant 1 min

Comment se passe le boot en utilisant le mode recovery depuis GRUB?

Bonjour,

En fait en passant pas le mode recovery, il bloque pendant 1'10'' environ sur Network Interface. Serait ce donc la détection de l'interface reseau qui pose souci ? ou alors est ce normal lors d'un boot en recovery...

C'est ce que je pensais. Il doit lancer des DHCPs a tout va sans recevoir de reponses.

donc nettoie ton /etc/network/interfaces

loucho

Re : [Résolu] Boot lent, bloque pendant 1 min

ok,

auto lo
iface lo inet loopback

auto eth1
iface eth1 inet dhcp

auto eth2
iface eth2 inet dhcp

auto ath0
iface ath0 inet dhcp

iface eth0 inet dhcp

iface wlan0 inet dhcp

auto wlan0

auto eth0

Je suis en wifi, donc je commente tout ce qui est eth comme suit :

auto lo
iface lo inet loopback

#auto eth1
#iface eth1 inet dhcp
#auto eth2
#iface eth2 inet dhcp

#auto ath0
#iface ath0 inet dhcp


#iface eth0 inet dhcp

iface wlan0 inet dhcp

auto wlan0
#auto eth0

loucho

Re : [Résolu] Boot lent, bloque pendant 1 min

Bon j'ai "nettoyé" interfaces mais bon pas mieux

foustala

Re : [Résolu] Boot lent, bloque pendant 1 min

Les interfaces fantômes, tu peux carrément les enlever.

et surtout commente le auto wlan0. En admettant que eth0 est ton interface filaire, je laisserai ceci

auto lo
iface lo inet loopback
#auto eth0
iface eth0 inet dhcp
#auto wlan0
iface wlan0 inet dhcp

loucho

Re : [Résolu] Boot lent, bloque pendant 1 min

Les interfaces fantômes, tu peux carrément les enlever.

et surtout commente le auto wlan0. En admettant que eth0 est ton interface filaire, je laisserai ceci

auto lo
iface lo inet loopback
#auto eth0
iface eth0 inet dhcp
#auto wlan0
iface wlan0 inet dhcp

Bonjour foustala,

En effet c'est bien cela, si je commente auto wlan0, le boot dure à peine 40s, sauf que le wifi ne se lance plus.
Je pense qu'il faudrait que je force l'attribution de l'@ ip, qu'en penses tu ? (en sosu entendu comment puis faire cela ? )
Bravo tu as bien situé d'ou provenait mon petit souci, merci beaucoup

foustala

Re : [Résolu] Boot lent, bloque pendant 1 min

C'est une bonne idee de passer en IP-fixe. Tu trouveras facilement dans la doc comment faire.

Quel genre de PC est ce? Quel est le contexte d'utilisation? Quel est l'infrastructure reseau?

loucho

Re : [Résolu] Boot lent, bloque pendant 1 min

Quel genre de PC est ce? Quel est le contexte d'utilisation? Quel est l'infrastructure reseau?

C'est mon pc à la maison, derrière une livebox en wifi et clé Sagem XG-703A, clé WPA.
En fouillant dans doc, je pense qu'il va falloir que je mette un truc comme ça  dans /etc/network/interfaces

auto wlan0
iface wlan0 inet static
#Mon ip souhaitée
address 192.168.1.xxx 
netmask 255.255.255.0
#ip de ma passerelle (livebox)
gateway 192.168.1.xxx

Je teste ça ce soir en rentrant du taf , je te tiens informé

foustala

Re : [Résolu] Boot lent, bloque pendant 1 min

Quel genre de PC est ce? Quel est le contexte d'utilisation? Quel est l'infrastructure reseau?

C'est mon pc à la maison,

Je veux dire, c'est un Desktop, pas un portable.

Si oui tu peux aussi desintaller le network-manager qui rajoute une couche suppplementaire pour le reseau qui  n'est pas utile dans ton cas.

# aptitute remove `aptitude -F %p search network-manager`

derrière une livebox en wifi et clé Sagem XG-703A, clé WPA.

Les livebox font du WPA?

En fouillant dans doc, je pense qu'il va falloir que je mette un truc comme ça  dans /etc/network/interfaces

auto wlan0
iface wlan0 inet static
#Mon ip souhaitée
address 192.168.1.xxx 
netmask 255.255.255.0
#ip de ma passerelle (livebox)
gateway 192.168.1.xxx

C'est Exactement ca

Dernière modification par foustala (Le 27/07/2007, à 12:16)

loucho

Re : [Résolu] Boot lent, bloque pendant 1 min

Bon alors,

Oui les livebox gèrent le WPA, mais c'est vrai qu'au début elles etaient en WEP uniquement, surtout les sagem.

En fait si j'applique les modifications et m'attribue une  IP fixe, à ce moment là Network Manager ne se lance pas et je ne peux pas passer sur un cryptage WPA en wifi .
En revanche le boot est rapide, tres rapide
Alors je ne sais pas si il existe un utitaire autre que network manager pour gerer la WPA + IP Fixe.

Dernière modification par loucho (Le 27/07/2007, à 23:50)

foustala

Re : [Résolu] Boot lent, bloque pendant 1 min

C'est wpasupplicant qui gere le WPA. le network-manager est juste une couche supplémentaire.

http://doc.ubuntu-fr.org/wpa

Dernière modification par foustala (Le 28/07/2007, à 17:37)

figaro

Re : [Résolu] Boot lent, bloque pendant 1 min

Networkmanager ne fonctionne qu'en DHCP c'est sa raison d'être !

---

Le blog de figaro (astuces diverses et tutos Samba pour débutants)
Le blog de cep (astuces Linux avancées)
Debian Lenny 6.0.1, Ubuntu 10.04.2, Ubuntu Remix 9.10, Ubuntu Netbook 10.04

foustala

Re : [Résolu] Boot lent, bloque pendant 1 min

Networkmanager ne fonctionne qu'en DHCP c'est sa raison d'être !

Donc aucun intérêt de le conserver pour une config réseau en IP fixe

figaro

Re : [Résolu] Boot lent, bloque pendant 1 min

Pourquoi s'embêter avec un Ip dite "fixe" (on devrait dire "fixée") alors que le DHCP a été inventé pour faciliter la vie des gens et que les routeurs modernes font du DHCP en particulier la liveBOx ?

Que Networlk manager gère le WPA sans s'embêter avec wpasupplicant ?

Mais pourquoi faire simple quand on peut faire compliqué ?

etc.......

---

Le blog de figaro (astuces diverses et tutos Samba pour débutants)
Le blog de cep (astuces Linux avancées)
Debian Lenny 6.0.1, Ubuntu 10.04.2, Ubuntu Remix 9.10, Ubuntu Netbook 10.04

foustala

Re : [Résolu] Boot lent, bloque pendant 1 min

Pourquoi s'embêter avec un Ip dite "fixe"

Tu as lu le problème de départ?

figaro

Re : [Résolu] Boot lent, bloque pendant 1 min

Pourquoi s'embêter avec un Ip dite "fixe"

Tu as lu le problème de départ?

Oui il boote en 2 minutes le temps que sa live box lui attribue une adresse, pas de quoi fouetter un chat, mais il a surtout pas mal bidouillé dans le wifi...

Dernière modification par figaro (Le 28/07/2007, à 17:58)

---

Le blog de figaro (astuces diverses et tutos Samba pour débutants)
Le blog de cep (astuces Linux avancées)
Debian Lenny 6.0.1, Ubuntu 10.04.2, Ubuntu Remix 9.10, Ubuntu Netbook 10.04

foustala

Re : [Résolu] Boot lent, bloque pendant 1 min

pas de quoi fouetter un chat.

Tout est relatif, surtout quand on sait qu'en passant en IP-fixe qui est une modification mineure, on divise par deux le temps de boot.

Le network-manager, c'est super utile (indispensable) pour les solutions mobiles, mais absolument inutile pour une configuration réseau statique. Idem pour le DHCP, C'est bien lorsqu'on reçoit des invites sur son réseau, mais c'est bien connu pour rallonger le temps de connexion.

Un temps de démarrage rapide fait parti des choses bien appréciable. Ce n'est pas un fonctionnement normal de bloquer une minute sur le réseau à chaque boot. J'appelle même ça un bug.

foustala

Re : [Résolu] Boot lent, bloque pendant 1 min

Network-manager gère le WPA sans s'embêter avec wpasupplicant ?

Network-manager utilise wpasupplicant.

figaro

Re : [Résolu] Boot lent, bloque pendant 1 min

Oui mais il le fait tout seul comme un grand.

Perdre une minute au boot c'est une vraie catastrophe surtout lorsque l'on boote une fois par jour ou par semaine,

et puis ce n'est pas un bug et si on a un bon routeur l'Ip s'attribue vite en DHCP mais il faut avoir des fichiers de conf propres sans fantômes. Feisty a bien évolué de ce coté là.

J'ai deux PC en Wifi et networkmanager dont un avec un chip Broadcom 4318 (Acer), en plus du PC en ethernet et je n'ai aucun de ces problèmes. Les Ip par DHCP s'attribuent en moins de 5 secondes et j'ai pourtant un relais Wifi vue la taille de la maison et l'épaisseur des murs.

Peut être qu'il a des faiblesses sur son Wifi : trop éloigné, des obstacles, des murs épais, etc.... et puis la livebox ce n'est pas ce qu'il y a de mieux comme puissance de Wifi

Allez je plaisante.

Dernière modification par figaro (Le 28/07/2007, à 18:46)

---

Le blog de figaro (astuces diverses et tutos Samba pour débutants)
Le blog de cep (astuces Linux avancées)
Debian Lenny 6.0.1, Ubuntu 10.04.2, Ubuntu Remix 9.10, Ubuntu Netbook 10.04

loucho

Re : [Résolu] Boot lent, bloque pendant 1 min

Bon vous allez rire !!!!
J'ai tout cassé mon wifi.
Donc je pense que je vais reprendre depuis le début avec la connexion Wifi. (tout virer et tout réinstaller mais proprement cette fois ci.)
En attendant, j'ai tiré un cable.
Avez vous un bon moyen pour enlever proprement tout ce qui concerne le wifi ?

loucho

Re : [Résolu] Boot lent, bloque pendant 1 min

et puis ce n'est pas un bug et si on a un bon routeur l'Ip s'attribue vite en DHCP mais il faut avoir des fichiers de conf propres sans fantômes.

Bonjour Figaro,

Qu'entends tu par cela ? Qu'appelles tu des fantomes ?

figaro

Re : [Résolu] Boot lent, bloque pendant 1 min

Des interfaces qui n'existent pas mais qui sont renseignés dans les fichiers de configuration.

Comme il semble que tu ais pas mal bidouillé ton système d'après ton premier post tu dois en avoir plein.

Bon courage.

PS: il faut se méfier des solutions trouvées sur le forum, elles ne sont pas toujours correctes et beaucoup ressemblent à des recettes de cuisine. Il y a quelques supporters sérieux il faut suivre ceux-là : foustala fait partie des sérieux essayes de suivre ses conseils.
Pour les DNS voir Safe93, pour les problèmes partitons, grub, etc voir cep et son blog, etc.....

Souvent mieux vaut voir le Wiki dans l'ensemble c'est plus sérieux car contrôlé.

Dernière modification par figaro (Le 29/07/2007, à 12:35)

---

Le blog de figaro (astuces diverses et tutos Samba pour débutants)
Le blog de cep (astuces Linux avancées)
Debian Lenny 6.0.1, Ubuntu 10.04.2, Ubuntu Remix 9.10, Ubuntu Netbook 10.04