[Résolu] Démarrage parfois rock'n roll

nam1962 · Le 02/05/2014, à 13:57

@moko138, non, je n'ai plus les kernels précédents.
J'attends du coup une maj de kernel (histoire de justifier d'être en utopic )
J'ai regardé les lignes que tu soulignes, je vois comment faire un rapport launchpad dès que j'ai le temps (à propos, oui, je mets clamav)
@Gaara, as tu une hybride ? (de mon côté mon proc est intel, donc ça nous élimine une source)

moko138 · Le 02/05/2014, à 14:37

nam1962 a écrit :

(à propos, oui, je mets clamav)

Pas compris le rapport avec "Calgary" et "Rio Grande".

nam1962 · Le 02/05/2014, à 14:42

Pour l'un des deux suis tombé sur un vieux launchpad ou les gens avaient eu le msg suiste à une install clamav (mais depuis j'ai perdu le lien)

Gaara · Le 02/05/2014, à 14:52

as tu une hybride ?

Non, un vieux AMD Quad de 2008, avec une ATI HD 7850.
Et mon boot n'est pas en UEFI (je ne sais pas si ça a un rapport mais bon..)

Dernière modification par Gaara (Le 02/05/2014, à 14:52)

nam1962 · Le 02/05/2014, à 15:02

Ca élimine deux autres pistes (suis en EUFI & sur intel)
Par contre j'ai bien une Radeon (mais qui ne s'active pas)

Gaara · Le 02/05/2014, à 15:05

Comment ça, qui ne s'active pas?
Note que c'est la première fois que ça m'arrive, depuis que je suis passé à Trusty. (donc depuis une semaine et demie environ)

moko138 · Le 02/05/2014, à 15:06

En googlant "init: plymouth-stop pre-start process" "terminated with status 1"
je suis tombé sur ce fil : http://forums.bodhilinux.com/index.php? … in-screen/ qui, dans le cas considéré, fait un distinguo avec une installation fraîche, et apporte un remède.

EDIT : https://bugs.launchpad.net/ubuntu/+sour … bug/800701 dit "statut confirmé"...

Dernière modification par moko138 (Le 02/05/2014, à 15:13)

nam1962 · Le 02/05/2014, à 15:30

J'ai regardé (j'avais vu le second). Mon install est clean (enfin l'était vu que je suis en utopic via sed et compagnie, mais le problème datait de trusty dans les derniers jours avant release et tend à diminuer - par exemple j'ai pu supprimer nomodeset)
Merci de suivre en tous cas !

@Gaara : http://forum.ubuntu-fr.org/viewtopic.php?id=1494331

Dernière modification par nam1962 (Le 02/05/2014, à 15:31)

Gaara · Le 02/05/2014, à 16:01

Bon.. alors oui, ça commence à être gênant !
Il a fallu que je reboot, ce n'est qu'après 5 tentatives qu'il a finalement redémarré. Je poste mon dmesg au cas ou

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=8aaa3972-e403-4475-866b-7c404383631d ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: System manufacturer System Product Name/M2N-SLI DELUXE, BIOS ASUS M2N-SLI DELUXE ACPI BIOS Revision 1701 10/02/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000BFF00000 mask FFFFFFF00000 uncachable
[    0.000000]   3 base 000100000000 mask FFFF80000000 write-back
[    0.000000]   4 base 000180000000 mask FFFFC0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 00000001c0000000 aka 7168M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[    0.000000] reg 3, base: 4GB, range: 2GB, type WB
[    0.000000] reg 4, base: 6GB, range: 1GB, type WB
[    0.000000] total RAM covered: 3071M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 2M  num_reg: 3      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[    0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f5d00-0x000f5d0f] mapped at [ffff8800000f5d00]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
[    0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE
[    0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1bfe00000-0x1bfffffff]
[    0.000000]  [mem 0x1bfe00000-0x1bfffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x1bc000000-0x1bfdfffff]
[    0.000000]  [mem 0x1bc000000-0x1bfdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x180000000-0x1bbffffff]
[    0.000000]  [mem 0x180000000-0x1bbffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbfedffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbfedffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[    0.000000]  [mem 0x100000000-0x17fffffff] page 1G
[    0.000000] RAMDISK: [mem 0x34fa0000-0x367c7fff]
[    0.000000] ACPI: RSDP 00000000000f7db0 000024 (v02 Nvidia)
[    0.000000] ACPI: XSDT 00000000bfee3100 00004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 00000000bfeeadc0 0000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 00000000bfee3280 007ACE (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000bfee0000 000040
[    0.000000] ACPI: SSDT 00000000bfeeb000 000544 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 00000000bfeeb5c0 000038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[    0.000000] ACPI: MCFG 00000000bfeeb640 00003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 00000000bfeeaf00 000098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bfffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1bfffffff]
[    0.000000]   NODE_DATA [mem 0x1bfff9000-0x1bfffdfff]
[    0.000000]  [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b9600000-ffff8801bf5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1bfffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xbfedffff]
[    0.000000]   node   0: [mem 0x100000000-0x1bfffffff]
[    0.000000] On node 0 totalpages: 1572476
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12220 pages used for memmap
[    0.000000]   DMA32 zone: 782048 pages, LIFO batch:31
[    0.000000]   Normal zone: 12288 pages used for memmap
[    0.000000]   Normal zone: 786432 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfee0000-0xbfee2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfee3000-0xbfeeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfef0000-0xbfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xbff00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801bfc00000 s86336 r8192 d24256 u524288
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1547883
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=8aaa3972-e403-4475-866b-7c404383631d ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ b4000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 6018184K/6289904K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 271720K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-3.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 25165824 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2611.912 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.82 BogoMIPS (lpj=10447648)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000032] Security Framework initialized
[    0.000052] AppArmor: AppArmor initialized
[    0.000054] Yama: becoming mindful.
[    0.000769] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.004449] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005913] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.005927] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.006225] Initializing cgroup subsys memory
[    0.006232] Initializing cgroup subsys devices
[    0.006234] Initializing cgroup subsys freezer
[    0.006236] Initializing cgroup subsys blkio
[    0.006238] Initializing cgroup subsys perf_event
[    0.006241] Initializing cgroup subsys hugetlb
[    0.006261] tseg: 00bff00000
[    0.006265] CPU: Physical Processor ID: 0
[    0.006266] CPU: Processor Core ID: 0
[    0.006268] mce: CPU supports 6 MCE banks
[    0.006273] LVT offset 0 assigned for vector 0xf9
[    0.006278] process: using AMD E400 aware idle routine
[    0.006281] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.006281] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[    0.006281] tlb_flushall_shift: 4
[    0.006386] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
[    0.007209] ACPI: Core revision 20131115
[    0.010479] ACPI: All ACPI Tables successfully acquired
[    0.012289] ftrace: allocating 28408 entries in 111 pages
[    0.024816] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064506] smpboot: CPU0: AMD Phenom(tm) 9950 Quad-Core Processor (fam: 10, model: 02, stepping: 03)
[    0.173831] Performance Events: AMD PMU driver.
[    0.173836] ... version:                0
[    0.173837] ... bit width:              48
[    0.173838] ... generic registers:      4
[    0.173839] ... value mask:             0000ffffffffffff
[    0.173841] ... max period:             00007fffffffffff
[    0.173842] ... fixed-purpose events:   0
[    0.173843] ... event mask:             000000000000000f
[    0.175621] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.175714] x86: Booting SMP configuration:
[    0.175716] .... node  #0, CPUs:      #1 #2 #3
[    0.215041] x86: Booted up 1 node, 4 CPUs
[    0.215043] smpboot: Total of 4 processors activated (20895.29 BogoMIPS)
[    0.217445] devtmpfs: initialized
[    0.220941] EVM: security.selinux
[    0.220943] EVM: security.SMACK64
[    0.220945] EVM: security.ima
[    0.220946] EVM: security.capability
[    0.221004] PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes)
[    0.222018] pinctrl core: initialized pinctrl subsystem
[    0.222100] regulator-dummy: no parameters
[    0.222136] RTC time: 15:35:16, date: 05/02/14
[    0.222180] NET: Registered protocol family 16
[    0.222304] cpuidle: using governor ladder
[    0.222306] cpuidle: using governor menu
[    0.222311] node 0 link 0: io port [5000, ffff]
[    0.222313] TOM: 00000000c0000000 aka 3072M
[    0.222316] Fam 10h mmconf [mem 0xf0000000-0xf00fffff]
[    0.222318] node 0 link 0: mmio [a0000, bffff]
[    0.222320] node 0 link 0: mmio [c0000000, efffffff]
[    0.222322] node 0 link 0: mmio [f4000000, fe02ffff]
[    0.222324] node 0 link 0: mmio [f0000000, f09fffff] ==> [f0100000, f09fffff]
[    0.222327] TOM2: 00000001c0000000 aka 7168M
[    0.222329] bus: [bus 00-09] on node 0 link 0
[    0.222331] bus: 00 [io  0x0000-0xffff]
[    0.222332] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.222333] bus: 00 [mem 0xc0000000-0xefffffff]
[    0.222335] bus: 00 [mem 0xf0a00000-0xffffffff]
[    0.222336] bus: 00 [mem 0xf0100000-0xf09fffff]
[    0.222337] bus: 00 [mem 0x1c0000000-0xfcffffffff]
[    0.222387] ACPI: bus type PCI registered
[    0.222390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.222456] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.222459] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.224693] PCI: Using configuration type 1 for base access
[    0.225893] bio: create slab <bio-0> at 0
[    0.226090] ACPI: Added _OSI(Module Device)
[    0.226092] ACPI: Added _OSI(Processor Device)
[    0.226094] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.226095] ACPI: Added _OSI(Processor Aggregator Device)
[    0.232917] ACPI: Interpreter enabled
[    0.232932] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.232946] ACPI: (supports S0 S1 S3 S4 S5)
[    0.232948] ACPI: Using IOAPIC for interrupt routing
[    0.232977] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.233131] ACPI: No dock devices found.
[    0.240911] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.240920] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.240925] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.240997] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.241213] PCI host bridge to bus 0000:00
[    0.241215] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.241218] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.241220] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.241222] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.241224] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.241225] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff]
[    0.241249] pci 0000:00:00.0: [10de:0369] type 00 class 0x050000
[    0.241500] pci 0000:00:01.0: [10de:0360] type 00 class 0x060100
[    0.241607] pci 0000:00:01.1: [10de:0368] type 00 class 0x0c0500
[    0.241619] pci 0000:00:01.1: reg 0x10: [io  0xfc00-0xfc3f]
[    0.241635] pci 0000:00:01.1: reg 0x20: [io  0x1c00-0x1c3f]
[    0.241640] pci 0000:00:01.1: reg 0x24: [io  0x1c40-0x1c7f]
[    0.241670] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.241763] pci 0000:00:02.0: [10de:036c] type 00 class 0x0c0310
[    0.241771] pci 0000:00:02.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
[    0.241800] pci 0000:00:02.0: supports D1 D2
[    0.241802] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.241861] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.241889] pci 0000:00:02.1: [10de:036d] type 00 class 0x0c0320
[    0.241896] pci 0000:00:02.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
[    0.241926] pci 0000:00:02.1: supports D1 D2
[    0.241928] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.242000] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.242032] pci 0000:00:04.0: [10de:036e] type 00 class 0x01018a
[    0.242048] pci 0000:00:04.0: reg 0x20: [io  0xf000-0xf00f]
[    0.242141] pci 0000:00:05.0: [10de:037f] type 00 class 0x010185
[    0.242149] pci 0000:00:05.0: reg 0x10: [io  0x09f0-0x09f7]
[    0.242153] pci 0000:00:05.0: reg 0x14: [io  0x0bf0-0x0bf3]
[    0.242157] pci 0000:00:05.0: reg 0x18: [io  0x0970-0x0977]
[    0.242161] pci 0000:00:05.0: reg 0x1c: [io  0x0b70-0x0b73]
[    0.242165] pci 0000:00:05.0: reg 0x20: [io  0xdc00-0xdc0f]
[    0.242170] pci 0000:00:05.0: reg 0x24: [mem 0xfe02d000-0xfe02dfff]
[    0.242266] pci 0000:00:05.1: [10de:037f] type 00 class 0x010185
[    0.242274] pci 0000:00:05.1: reg 0x10: [io  0x09e0-0x09e7]
[    0.242278] pci 0000:00:05.1: reg 0x14: [io  0x0be0-0x0be3]
[    0.242282] pci 0000:00:05.1: reg 0x18: [io  0x0960-0x0967]
[    0.242286] pci 0000:00:05.1: reg 0x1c: [io  0x0b60-0x0b63]
[    0.242290] pci 0000:00:05.1: reg 0x20: [io  0xc800-0xc80f]
[    0.242295] pci 0000:00:05.1: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
[    0.242391] pci 0000:00:05.2: [10de:037f] type 00 class 0x010185
[    0.242398] pci 0000:00:05.2: reg 0x10: [io  0xc400-0xc407]
[    0.242403] pci 0000:00:05.2: reg 0x14: [io  0xc000-0xc003]
[    0.242407] pci 0000:00:05.2: reg 0x18: [io  0xbc00-0xbc07]
[    0.242411] pci 0000:00:05.2: reg 0x1c: [io  0xb800-0xb803]
[    0.242415] pci 0000:00:05.2: reg 0x20: [io  0xb400-0xb40f]
[    0.242419] pci 0000:00:05.2: reg 0x24: [mem 0xfe02b000-0xfe02bfff]
[    0.242517] pci 0000:00:06.0: [10de:0370] type 01 class 0x060401
[    0.242596] pci 0000:00:06.0: System wakeup disabled by ACPI
[    0.242623] pci 0000:00:06.1: [10de:0371] type 00 class 0x040300
[    0.242632] pci 0000:00:06.1: reg 0x10: [mem 0xfe020000-0xfe023fff]
[    0.242667] pci 0000:00:06.1: PME# supported from D3hot D3cold
[    0.242729] pci 0000:00:06.1: System wakeup disabled by ACPI
[    0.242762] pci 0000:00:08.0: [10de:0373] type 00 class 0x068000
[    0.242773] pci 0000:00:08.0: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[    0.242778] pci 0000:00:08.0: reg 0x14: [io  0xb000-0xb007]
[    0.242782] pci 0000:00:08.0: reg 0x18: [mem 0xfe029000-0xfe0290ff]
[    0.242786] pci 0000:00:08.0: reg 0x1c: [mem 0xfe028000-0xfe02800f]
[    0.242817] pci 0000:00:08.0: supports D1 D2
[    0.242818] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.242878] pci 0000:00:08.0: System wakeup disabled by ACPI
[    0.242911] pci 0000:00:09.0: [10de:0373] type 00 class 0x068000
[    0.242922] pci 0000:00:09.0: reg 0x10: [mem 0xfe027000-0xfe027fff]
[    0.242926] pci 0000:00:09.0: reg 0x14: [io  0xac00-0xac07]
[    0.242930] pci 0000:00:09.0: reg 0x18: [mem 0xfe026000-0xfe0260ff]
[    0.242934] pci 0000:00:09.0: reg 0x1c: [mem 0xfe025000-0xfe02500f]
[    0.242964] pci 0000:00:09.0: supports D1 D2
[    0.242966] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.243032] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.243064] pci 0000:00:0a.0: [10de:0376] type 01 class 0x060400
[    0.243090] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.243153] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.243183] pci 0000:00:0e.0: [10de:0375] type 01 class 0x060400
[    0.243208] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.243270] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.243298] pci 0000:00:0f.0: [10de:0377] type 01 class 0x060400
[    0.243323] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.243385] pci 0000:00:0f.0: System wakeup disabled by ACPI
[    0.243415] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.243502] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.243584] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.243667] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.243753] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.243874] pci 0000:01:0b.0: [104c:8023] type 00 class 0x0c0010
[    0.243886] pci 0000:01:0b.0: reg 0x10: [mem 0xfdeff000-0xfdeff7ff]
[    0.243892] pci 0000:01:0b.0: reg 0x14: [mem 0xfdef8000-0xfdefbfff]
[    0.243932] pci 0000:01:0b.0: supports D1 D2
[    0.243934] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot
[    0.243977] pci 0000:00:06.0: PCI bridge to [bus 01] (subtractive decode)
[    0.243981] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.243984] pci 0000:00:06.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.243986] pci 0000:00:06.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.243988] pci 0000:00:06.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.243990] pci 0000:00:06.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.243992] pci 0000:00:06.0:   bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
[    0.244028] pci 0000:02:00.0: [10b5:8608] type 01 class 0x060400
[    0.244037] pci 0000:02:00.0: reg 0x10: [mem 0xfdde0000-0xfddfffff]
[    0.244083] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.248789] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
[    0.248792] pci 0000:00:0a.0:   bridge window [io  0x8000-0x9fff]
[    0.248794] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfddfffff]
[    0.248844] pci 0000:03:01.0: [10b5:8608] type 01 class 0x060400
[    0.248898] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
[    0.248947] pci 0000:03:05.0: [10b5:8608] type 01 class 0x060400
[    0.249000] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
[    0.249044] pci 0000:03:07.0: [10b5:8608] type 01 class 0x060400
[    0.249094] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold
[    0.249138] pci 0000:03:09.0: [10b5:8608] type 01 class 0x060400
[    0.249188] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
[    0.249238] pci 0000:02:00.0: PCI bridge to [bus 03-07]
[    0.249243] pci 0000:02:00.0:   bridge window [io  0x8000-0x9fff]
[    0.249246] pci 0000:02:00.0:   bridge window [mem 0xfdb00000-0xfdcfffff]
[    0.249304] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[    0.249323] pci 0000:04:00.0: reg 0x10: [mem 0xfdcfe000-0xfdcfffff 64bit]
[    0.249414] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.256786] pci 0000:03:01.0: PCI bridge to [bus 04]
[    0.256793] pci 0000:03:01.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.256848] pci 0000:05:00.0: [1b4b:9120] type 00 class 0x010601
[    0.256860] pci 0000:05:00.0: reg 0x10: [io  0x9c00-0x9c07]
[    0.256869] pci 0000:05:00.0: reg 0x14: [io  0x9800-0x9803]
[    0.256877] pci 0000:05:00.0: reg 0x18: [io  0x9400-0x9407]
[    0.256886] pci 0000:05:00.0: reg 0x1c: [io  0x9000-0x9003]
[    0.256895] pci 0000:05:00.0: reg 0x20: [io  0x8c00-0x8c0f]
[    0.256903] pci 0000:05:00.0: reg 0x24: [mem 0xfdbff000-0xfdbff7ff]
[    0.256912] pci 0000:05:00.0: reg 0x30: [mem 0xfdbe0000-0xfdbeffff pref]
[    0.256950] pci 0000:05:00.0: PME# supported from D3hot
[    0.264783] pci 0000:03:05.0: PCI bridge to [bus 05]
[    0.264788] pci 0000:03:05.0:   bridge window [io  0x8000-0x9fff]
[    0.264792] pci 0000:03:05.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.264833] pci 0000:03:07.0: PCI bridge to [bus 06]
[    0.264879] pci 0000:03:09.0: PCI bridge to [bus 07]
[    0.264944] pci 0000:08:00.0: [197b:2363] type 00 class 0x010400
[    0.265003] pci 0000:08:00.0: reg 0x24: [mem 0xfdafe000-0xfdafffff]
[    0.265013] pci 0000:08:00.0: reg 0x30: [mem 0xfdae0000-0xfdaeffff pref]
[    0.265047] pci 0000:08:00.0: PME# supported from D3hot
[    0.265090] pci 0000:08:00.1: [197b:2363] type 00 class 0x010185
[    0.265105] pci 0000:08:00.1: reg 0x10: [io  0x7c00-0x7c07]
[    0.265112] pci 0000:08:00.1: reg 0x14: [io  0x7800-0x7803]
[    0.265120] pci 0000:08:00.1: reg 0x18: [io  0x7400-0x7407]
[    0.265127] pci 0000:08:00.1: reg 0x1c: [io  0x7000-0x7003]
[    0.265134] pci 0000:08:00.1: reg 0x20: [io  0x6c00-0x6c0f]
[    0.265202] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.265209] pci 0000:00:0e.0: PCI bridge to [bus 08]
[    0.265212] pci 0000:00:0e.0:   bridge window [io  0x6000-0x7fff]
[    0.265214] pci 0000:00:0e.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.265252] pci 0000:09:00.0: [1002:6819] type 00 class 0x030000
[    0.265265] pci 0000:09:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.265275] pci 0000:09:00.0: reg 0x18: [mem 0xfd980000-0xfd9bffff 64bit]
[    0.265281] pci 0000:09:00.0: reg 0x20: [io  0x5c00-0x5cff]
[    0.265293] pci 0000:09:00.0: reg 0x30: [mem 0xfd9c0000-0xfd9dffff pref]
[    0.265329] pci 0000:09:00.0: supports D1 D2
[    0.265331] pci 0000:09:00.0: PME# supported from D1 D2 D3hot
[    0.265377] pci 0000:09:00.1: [1002:aab0] type 00 class 0x040300
[    0.265389] pci 0000:09:00.1: reg 0x10: [mem 0xfd9fc000-0xfd9fffff 64bit]
[    0.265449] pci 0000:09:00.1: supports D1 D2
[    0.272781] pci 0000:00:0f.0: PCI bridge to [bus 09]
[    0.272784] pci 0000:00:0f.0:   bridge window [io  0x5000-0x5fff]
[    0.272787] pci 0000:00:0f.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.272790] pci 0000:00:0f.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.273502] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.273557] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.273609] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.273663] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.273720] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.273775] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[    0.273827] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[    0.273885] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 *10 11 14 15)
[    0.273939] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.273991] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[    0.274043] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[    0.274093] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)
[    0.274144] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[    0.274192] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.274248] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[    0.274301] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[    0.274355] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.274407] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.274455] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[    0.274509] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
[    0.274606] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.274685] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.274765] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.274848] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.274936] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.275014] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[    0.275095] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[    0.275176] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
[    0.275260] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.275346] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.275426] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[    0.275507] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.275594] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.275676] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.275762] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.275849] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.275929] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.276015] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.276100] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.276181] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[    0.276366] ACPI: Enabled 1 GPEs in block 20 to 5F
[    0.276373] ACPI: \_SB_.PCI0: notify handler is installed
[    0.276435] Found 1 acpi root devices
[    0.276568] vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.276569] vgaarb: loaded
[    0.276571] vgaarb: bridge control possible 0000:09:00.0
[    0.276752] SCSI subsystem initialized
[    0.276815] libata version 3.00 loaded.
[    0.276838] ACPI: bus type USB registered
[    0.276855] usbcore: registered new interface driver usbfs
[    0.276863] usbcore: registered new interface driver hub
[    0.276888] usbcore: registered new device driver usb
[    0.277015] PCI: Using ACPI for IRQ routing
[    0.278059] PCI: pci_cache_line_size set to 64 bytes
[    0.278113] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.278116] e820: reserve RAM buffer [mem 0xbfee0000-0xbfffffff]
[    0.278208] NetLabel: Initializing
[    0.278209] NetLabel:  domain hash size = 128
[    0.278210] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.278225] NetLabel:  unlabeled traffic allowed by default
[    0.278287] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.278294] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[    0.278298] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.280574] Switched to clocksource hpet
[    0.286906] AppArmor: AppArmor Filesystem Enabled
[    0.286941] pnp: PnP ACPI init
[    0.286958] ACPI: bus type PNP registered
[    0.287107] system 00:00: [io  0x1000-0x107f] has been reserved
[    0.287110] system 00:00: [io  0x1080-0x10ff] has been reserved
[    0.287112] system 00:00: [io  0x1400-0x147f] has been reserved
[    0.287114] system 00:00: [io  0x1480-0x14ff] has been reserved
[    0.287116] system 00:00: [io  0x1800-0x187f] has been reserved
[    0.287118] system 00:00: [io  0x1880-0x18ff] has been reserved
[    0.287122] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.287233] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.287235] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.287237] system 00:01: [io  0x0290-0x0297] has been reserved
[    0.287240] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.287251] pnp 00:02: [dma 4]
[    0.287278] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.287355] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.287397] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.287419] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.287449] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.287756] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.288081] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.288202] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.288803] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.288807] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.288968] system 00:0b: [mem 0x000d6400-0x000d7fff] has been reserved
[    0.288971] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.288973] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.288977] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.288980] system 00:0b: [mem 0xfefff000-0xfefff0ff] has been reserved
[    0.288982] system 00:0b: [mem 0xbfee0000-0xbfefffff] could not be reserved
[    0.288984] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[    0.288987] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.288989] system 00:0b: [mem 0x00100000-0xbfedffff] could not be reserved
[    0.288991] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.288993] system 00:0b: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.288996] system 00:0b: [mem 0xfefff000-0xfeffffff] could not be reserved
[    0.288998] system 00:0b: [mem 0xfff80000-0xfff80fff] has been reserved
[    0.289000] system 00:0b: [mem 0xfff90000-0xfffbffff] has been reserved
[    0.289002] system 00:0b: [mem 0xfffed000-0xfffeffff] has been reserved
[    0.289005] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.289014] pnp: PnP ACPI: found 12 devices
[    0.289015] ACPI: bus type PNP unregistered
[    0.295542] pci 0000:00:06.0: PCI bridge to [bus 01]
[    0.295548] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.295553] pci 0000:03:01.0: PCI bridge to [bus 04]
[    0.295558] pci 0000:03:01.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.295564] pci 0000:03:05.0: PCI bridge to [bus 05]
[    0.295567] pci 0000:03:05.0:   bridge window [io  0x8000-0x9fff]
[    0.295571] pci 0000:03:05.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.295577] pci 0000:03:07.0: PCI bridge to [bus 06]
[    0.295585] pci 0000:03:09.0: PCI bridge to [bus 07]
[    0.295594] pci 0000:02:00.0: PCI bridge to [bus 03-07]
[    0.295596] pci 0000:02:00.0:   bridge window [io  0x8000-0x9fff]
[    0.295600] pci 0000:02:00.0:   bridge window [mem 0xfdb00000-0xfdcfffff]
[    0.295606] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
[    0.295609] pci 0000:00:0a.0:   bridge window [io  0x8000-0x9fff]
[    0.295611] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfddfffff]
[    0.295616] pci 0000:00:0e.0: PCI bridge to [bus 08]
[    0.295618] pci 0000:00:0e.0:   bridge window [io  0x6000-0x7fff]
[    0.295620] pci 0000:00:0e.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.295625] pci 0000:00:0f.0: PCI bridge to [bus 09]
[    0.295627] pci 0000:00:0f.0:   bridge window [io  0x5000-0x5fff]
[    0.295629] pci 0000:00:0f.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.295632] pci 0000:00:0f.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.295636] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.295638] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.295640] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.295642] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.295644] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
[    0.295646] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.295648] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.295650] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.295652] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.295654] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
[    0.295656] pci_bus 0000:01: resource 8 [mem 0xbff00000-0xfebfffff]
[    0.295658] pci_bus 0000:02: resource 0 [io  0x8000-0x9fff]
[    0.295660] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfddfffff]
[    0.295662] pci_bus 0000:03: resource 0 [io  0x8000-0x9fff]
[    0.295664] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdcfffff]
[    0.295666] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.295669] pci_bus 0000:05: resource 0 [io  0x8000-0x9fff]
[    0.295670] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    0.295673] pci_bus 0000:08: resource 0 [io  0x6000-0x7fff]
[    0.295675] pci_bus 0000:08: resource 1 [mem 0xfda00000-0xfdafffff]
[    0.295677] pci_bus 0000:09: resource 0 [io  0x5000-0x5fff]
[    0.295679] pci_bus 0000:09: resource 1 [mem 0xfd900000-0xfd9fffff]
[    0.295681] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.295721] NET: Registered protocol family 2
[    0.295915] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.296165] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.296553] TCP: Hash tables configured (established 65536 bind 65536)
[    0.296632] TCP: reno registered
[    0.296645] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.296710] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.296843] NET: Registered protocol family 1
[    0.297152] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.368946] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.369117] pci 0000:00:05.0: Enabling HT MSI Mapping
[    0.369164] pci 0000:00:05.1: Enabling HT MSI Mapping
[    0.369209] pci 0000:00:05.2: Enabling HT MSI Mapping
[    0.369254] pci 0000:00:06.0: Enabling HT MSI Mapping
[    0.369302] pci 0000:00:06.1: Enabling HT MSI Mapping
[    0.369359] pci 0000:00:08.0: Enabling HT MSI Mapping
[    0.369420] pci 0000:00:09.0: Enabling HT MSI Mapping
[    0.369481] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    0.369547] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    0.369617] pci 0000:00:0f.0: Enabling HT MSI Mapping
[    0.369838] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[    0.370040] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[    0.370247] pci 0000:09:00.0: Boot video device
[    0.370252] PCI: CLS 32 bytes, default 64
[    0.370323] Trying to unpack rootfs image as initramfs...
[    0.791335] Freeing initrd memory: 24736K (ffff880034fa0000 - ffff8800367c8000)
[    0.791696] PCI-DMA: Disabling AGP.
[    0.793316] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    0.793318] PCI-DMA: using GART IOMMU.
[    0.793321] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.797487] LVT offset 1 assigned for vector 0x400
[    0.797500] IBS: LVT offset 1 assigned
[    0.797531] perf: AMD IBS detected (0x00000007)
[    0.797582] microcode: CPU0: patch_level=0x01000065
[    0.797587] microcode: CPU1: patch_level=0x01000065
[    0.797595] microcode: CPU2: patch_level=0x01000065
[    0.797605] microcode: CPU3: patch_level=0x01000065
[    0.797660] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.797662] Scanning for low memory corruption every 60 seconds
[    0.797883] Initialise system trusted keyring
[    0.797928] audit: initializing netlink socket (disabled)
[    0.797947] type=2000 audit(1399044916.692:1): initialized
[    0.823247] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.824759] VFS: Disk quotas dquot_6.5.2
[    0.824813] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.825287] fuse init (API version 7.22)
[    0.825358] msgmni has been set to 11931
[    0.825411] Key type big_key registered
[    0.825914] Key type asymmetric registered
[    0.825917] Asymmetric key parser 'x509' registered
[    0.825971] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.826020] io scheduler noop registered
[    0.826022] io scheduler deadline registered (default)
[    0.826048] io scheduler cfq registered
[    0.826175] pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X
[    0.826225] pcieport 0000:00:0e.0: irq 41 for MSI/MSI-X
[    0.826263] pcieport 0000:00:0f.0: irq 42 for MSI/MSI-X
[    0.826309] pcieport 0000:02:00.0: irq 43 for MSI/MSI-X
[    0.826365] pcieport 0000:03:01.0: irq 44 for MSI/MSI-X
[    0.826562] pcieport 0000:03:05.0: irq 45 for MSI/MSI-X
[    0.826825] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[    0.826849] pcieport 0000:03:07.0: irq 46 for MSI/MSI-X
[    0.826996] pcieport 0000:03:09.0: irq 47 for MSI/MSI-X
[    0.827059] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.827075] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.827126] ipmi message handler version 39.2
[    0.827179] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.827184] ACPI: Power Button [PWRB]
[    0.827244] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.827247] ACPI: Power Button [PWRF]
[    0.827289] ACPI: Fan [FAN] (on)
[    0.827548] ACPI: [Package] has zero elements (ffff8801b6a8f300)
[    0.827550] ACPI: Invalid passive threshold
[    0.827749] thermal LNXTHERM:00: registered as thermal_zone0
[    0.827751] ACPI: Thermal Zone [THRM] (40 C)
[    0.827779] GHES: HEST is not enabled!
[    0.827884] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.848242] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.849640] Linux agpgart interface v0.103
[    0.851092] brd: module loaded
[    0.851845] loop: module loaded
[    0.852266] libphy: Fixed MDIO Bus: probed
[    0.852351] tun: Universal TUN/TAP device driver, 1.6
[    0.852353] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.852396] PPP generic driver version 2.4.2
[    0.852440] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.852445] ehci-pci: EHCI PCI platform driver
[    0.852639] ehci-pci 0000:00:02.1: EHCI Host Controller
[    0.852645] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.852653] ehci-pci 0000:00:02.1: debug port 1
[    0.852687] ehci-pci 0000:00:02.1: cache line size of 32 is not supported
[    0.852710] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
[    0.864553] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.864615] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.864617] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.864619] usb usb1: Product: EHCI Host Controller
[    0.864621] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    0.864623] usb usb1: SerialNumber: 0000:00:02.1
[    0.864724] hub 1-0:1.0: USB hub found
[    0.864731] hub 1-0:1.0: 10 ports detected
[    0.864910] ehci-platform: EHCI generic platform driver
[    0.864919] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.864920] ohci-pci: OHCI PCI platform driver
[    0.865045] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    0.865050] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.865075] ohci-pci 0000:00:02.0: irq 23, io mem 0xfe02f000
[    0.922574] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.922576] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.922578] usb usb2: Product: OHCI PCI host controller
[    0.922580] usb usb2: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    0.922581] usb usb2: SerialNumber: 0000:00:02.0
[    0.922676] hub 2-0:1.0: USB hub found
[    0.922684] hub 2-0:1.0: 10 ports detected
[    0.922853] ohci-platform: OHCI generic platform driver
[    0.922861] uhci_hcd: USB Universal Host Controller Interface driver
[    0.923015] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.923020] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.923188] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[    0.923195] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[    0.923204] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
[    0.923210] xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
[    0.923216] xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X
[    0.923331] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.923333] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.923335] usb usb3: Product: xHCI Host Controller
[    0.923336] usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    0.923338] usb usb3: SerialNumber: 0000:04:00.0
[    0.923426] hub 3-0:1.0: USB hub found
[    0.923435] hub 3-0:1.0: 2 ports detected
[    0.923515] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.923519] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.926545] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.926547] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.926548] usb usb4: Product: xHCI Host Controller
[    0.926550] usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    0.926551] usb usb4: SerialNumber: 0000:04:00.0
[    0.926639] hub 4-0:1.0: USB hub found
[    0.926653] hub 4-0:1.0: 2 ports detected
[    0.932600] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.932602] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.932763] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.932857] mousedev: PS/2 mouse device common for all mice
[    0.932985] rtc_cmos 00:04: RTC can wake from S4
[    0.933124] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.933158] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.933222] device-mapper: uevent: version 1.0.3
[    0.933280] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.933286] ledtrig-cpu: registered to indicate activity on CPUs
[    0.933400] TCP: cubic registered
[    0.933493] NET: Registered protocol family 10
[    0.933683] NET: Registered protocol family 17
[    0.933693] Key type dns_resolver registered
[    0.933981] Loading compiled-in X.509 certificates
[    0.935048] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[    0.935061] registered taskstats version 1
[    0.938051] Key type trusted registered
[    0.940345] Key type encrypted registered
[    0.942668] AppArmor: AppArmor sha1 policy hashing enabled
[    0.942671] IMA: No TPM chip found, activating TPM-bypass!
[    0.943020] regulator-dummy: disabling
[    0.943074]   Magic number: 14:761:587
[    0.943116] pci_bus 0000:08: hash matches
[    0.943199] rtc_cmos 00:04: setting system clock to 2014-05-02 15:35:17 UTC (1399044917)
[    0.943304] acpi-cpufreq: overriding BIOS provided _PSD data
[    0.943414] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.943415] EDD information not available.
[    0.943444] PM: Hibernation image not present or could not be loaded.
[    0.945010] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[    0.945014] Write protecting the kernel read-only data: 12288k
[    0.947573] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[    0.949633] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[    0.955305] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.966962] systemd-udevd[115]: starting version 204
[    0.988963] pata_amd 0000:00:04.0: version 0.4.1
[    0.989607] scsi0 : pata_amd
[    0.989748] scsi1 : pata_amd
[    0.989794] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.989796] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.989831] sata_nv 0000:00:05.0: version 3.5
[    0.989855] ata1: port disabled--ignoring
[    0.990094] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    0.990115] sata_nv 0000:00:05.0: Using SWNCQ mode
[    0.990802] ata2: port disabled--ignoring
[    0.990822] scsi2 : sata_nv
[    0.992509] scsi3 : sata_nv
[    0.992600] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
[    0.992602] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
[    0.992869] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[    0.992890] sata_nv 0000:00:05.1: Using SWNCQ mode
[    0.993498] scsi4 : sata_nv
[    0.993611] scsi5 : sata_nv
[    0.993715] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
[    0.993721] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
[    0.994025] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
[    0.994036] sata_nv 0000:00:05.2: Using SWNCQ mode
[    0.994969] scsi6 : sata_nv
[    0.995257] scsi7 : sata_nv
[    0.995325] ata7: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 23
[    0.995328] ata8: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 23
[    0.995394] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    0.995399] pata_acpi 0000:08:00.1: enabling device (0000 -> 0001)
[    0.995849] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[    0.998842] ahci 0000:05:00.0: version 3.0
[    0.999029] ahci 0000:05:00.0: irq 53 for MSI/MSI-X
[    0.999083] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.999086] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    0.999392] scsi8 : ahci
[    0.999519] scsi9 : ahci
[    0.999587] ata9: SATA max UDMA/133 abar m2048@0xfdbff000 port 0xfdbff100 irq 53
[    0.999590] ata10: SATA max UDMA/133 abar m2048@0xfdbff000 port 0xfdbff180 irq 53
[    1.002476] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    1.012572] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.012579] ahci 0000:08:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.012966] scsi10 : ahci
[    1.015449] scsi11 : ahci
[    1.015538] ata11: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 16
[    1.015542] ata12: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 16
[    1.016034] scsi12 : pata_jmicron
[    1.016101] scsi13 : pata_jmicron
[    1.016132] ata13: PATA max UDMA/100 cmd 0x7c00 ctl 0x7800 bmdma 0x6c00 irq 16
[    1.016134] ata14: PATA max UDMA/100 cmd 0x7400 ctl 0x7000 bmdma 0x6c08 irq 16
[    1.056575] firewire_ohci 0000:01:0b.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.176546] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.304522] ata7: SATA link down (SStatus 0 SControl 300)
[    1.304530] ata5: SATA link down (SStatus 0 SControl 300)
[    1.304534] ata3: SATA link down (SStatus 0 SControl 300)
[    1.309942] usb 1-1: New USB device found, idVendor=04a9, idProduct=1909
[    1.309946] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.309948] usb 1-1: Product: CanoScan
[    1.309950] usb 1-1: Manufacturer: Canon
[    1.332532] ata11: SATA link down (SStatus 0 SControl 300)
[    1.336521] ata12: SATA link down (SStatus 0 SControl 300)
[    1.420521] usb 1-4: new high-speed USB device number 3 using ehci-pci
[    1.488508] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[    1.488780] ata9.00: supports DRM functions and may not be fully accessible
[    1.491589] ata9.00: disabling queued TRIM support
[    1.491591] ata9.00: ATA-9: Crucial_CT240M500SSD1, MU03, max UDMA/133
[    1.491594] ata9.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.492500] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[    1.493600] ata10.00: ATA-8: ST750LX003-1AC154, SM12, max UDMA/133
[    1.493602] ata10.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.495010] ata9.00: supports DRM functions and may not be fully accessible
[    1.495883] ata10.00: configured for UDMA/133
[    1.497818] ata9.00: disabling queued TRIM support
[    1.500986] ata9.00: configured for UDMA/133
[    1.517025] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 04:4b:80:80:80:03
[    1.517028] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[    1.517317] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[    1.552798] usb 1-4: New USB device found, idVendor=058f, idProduct=6254
[    1.552800] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.552957] hub 1-4:1.0: USB hub found
[    1.553045] hub 1-4:1.0: 4 ports detected
[    1.556542] firewire_core 0000:01:0b.0: created device fw0: GUID 0011d80000f17f95, S400
[    1.620495] ata4: SATA link down (SStatus 0 SControl 300)
[    1.796479] tsc: Refined TSC clocksource calibration: 2612.037 MHz
[    1.932467] ata6: SATA link down (SStatus 0 SControl 300)
[    2.028512] usb 1-4.2: new high-speed USB device number 5 using ehci-pci
[    2.035997] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 04:4b:80:80:80:03
[    2.036000] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[    2.137878] usb 1-4.2: New USB device found, idVendor=058f, idProduct=6366
[    2.137882] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.137884] usb 1-4.2: Product: Mass Storage Device
[    2.137886] usb 1-4.2: Manufacturer: Generic
[    2.137888] usb 1-4.2: SerialNumber: 058F63666433
[    2.141263] usb-storage 1-4.2:1.0: USB Mass Storage device detected
[    2.141370] scsi14 : usb-storage 1-4.2:1.0
[    2.141463] usbcore: registered new interface driver usb-storage
[    2.244443] ata8: SATA link down (SStatus 0 SControl 300)
[    2.244651] scsi 8:0:0:0: Direct-Access     ATA      Crucial_CT240M50 MU03 PQ: 0 ANSI: 5
[    2.244806] sd 8:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[    2.244810] sd 8:0:0:0: [sda] 4096-byte physical blocks
[    2.244834] sd 8:0:0:0: Attached scsi generic sg0 type 0
[    2.244991] sd 8:0:0:0: [sda] Write Protect is off
[    2.244994] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.245031] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.245042] scsi 9:0:0:0: Direct-Access     ATA      ST750LX003-1AC15 SM12 PQ: 0 ANSI: 5
[    2.245189] sd 9:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.245192] sd 9:0:0:0: [sdb] 4096-byte physical blocks
[    2.245222] sd 9:0:0:0: Attached scsi generic sg1 type 0
[    2.245388] sd 9:0:0:0: [sdb] Write Protect is off
[    2.245391] sd 9:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.245414] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.245724]  sda: sda1 sda2
[    2.246131] sd 8:0:0:0: [sda] Attached SCSI disk
[    2.246264]  sdb: sdb1
[    2.246605] sd 9:0:0:0: [sdb] Attached SCSI disk
[    2.312468] usb 2-10: new full-speed USB device number 2 using ohci-pci
[    2.796475] Switched to clocksource tsc
[    3.141821] scsi 14:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    3.142038] sd 14:0:0:0: Attached scsi generic sg2 type 0
[    3.143435] sd 14:0:0:0: [sdc] Attached SCSI removable disk
[    3.196371] usb 2-10: new full-speed USB device number 3 using ohci-pci
[    3.380358] usb 2-10: device descriptor read/64, error -62
[    3.567712] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    3.567717] EXT4-fs (sda1): write access will be enabled during recovery
[    3.568747] EXT4-fs (sda1): recovery complete
[    3.568798] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.664331] usb 2-10: device descriptor read/64, error -62
[    3.670995] random: init urandom read with 61 bits of entropy available
[    3.899259] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.899268] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    3.944352] usb 2-10: new full-speed USB device number 4 using ohci-pci
[    3.956714] systemd-udevd[368]: starting version 204
[    3.982435] random: nonblocking pool is initialized
[    4.014472] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[    4.014479] ACPI Warning: 0x0000000000001c40-0x0000000000001c7f SystemIO conflicts with Region \_SB_.PCI0.SM01 1 (20131115/utaddress-251)
[    4.014485] ACPI Warning: 0x0000000000001c40-0x0000000000001c7f SystemIO conflicts with Region \_SB_.PCI0.SM00 2 (20131115/utaddress-251)
[    4.014489] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.015902] nv_tco: NV TCO WatchDog Timer Driver v0.01
[    4.015992] nv_tco: Watchdog reboot not detected
[    4.016097] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[    4.046415] parport_pc 00:08: reported by Plug and Play ACPI
[    4.046444] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[    4.046793] lp: driver loaded but no devices found
[    4.050683] vhba: module verification failed: signature and/or  required key missing - tainting kernel
[    4.051044] scsi15 : vhba
[    4.058415] WARNING! power/level is deprecated; use power/control instead
[    4.058782] ppdev: user-space parallel port driver
[    4.074082] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    4.074087] AMD IOMMUv2 functionality not available on this system
[    4.084721] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    4.084727] Disabling lock debugging due to kernel taint
[    4.101565] <6>[fglrx] Maximum main memory to use for locked dma buffers: 5771 MBytes.
[    4.101929] <6>[fglrx]   vendor: 1002 device: 6819 count: 1
[    4.102527] <6>[fglrx] ioport: bar 4, base 0x5c00, size: 0x100
[    4.102957] <6>[fglrx] Kernel PAT support is enabled
[    4.102981] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
[    4.104555] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[    4.107467] type=1400 audit(1399037720.660:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=428 comm="apparmor_parser"
[    4.107477] type=1400 audit(1399037720.660:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
[    4.107481] type=1400 audit(1399037720.660:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
[    4.107960] type=1400 audit(1399037720.660:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
[    4.107965] type=1400 audit(1399037720.660:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
[    4.108250] type=1400 audit(1399037720.660:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
[    4.112630] systemd-udevd[393]: renamed network interface eth0 to rename2
[    4.128321] usb 2-10: device descriptor read/64, error -62
[    4.130433] MCE: In-kernel MCE decoding enabled.
[    4.133022] EDAC MC: Ver: 3.0.0
[    4.133713] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[    4.133727] hda_intel: msi for device 1043:81f6 set to 0
[    4.133757] hda-intel 0000:00:06.1: Disabling 64bit DMA
[    4.139494] AMD64 EDAC driver v3.4.0
[    4.141369] lp0: using parport0 (interrupt-driven).
[    4.144416] hda-intel 0000:00:06.1: Enable delay in RIRB handling
[    4.196382] kvm: Nested Virtualization enabled
[    4.196388] kvm: Nested Paging enabled
[    4.254869] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
[    4.416283] usb 2-10: device descriptor read/64, error -62
[    4.509957] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory
[    4.625627] type=1400 audit(1399037721.180:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=701 comm="apparmor_parser"
[    4.625638] type=1400 audit(1399037721.180:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=701 comm="apparmor_parser"
[    4.626110] type=1400 audit(1399037721.180:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=701 comm="apparmor_parser"
[    4.665933] init: cups main process (707) killed by HUP signal
[    4.665959] init: cups main process ended, respawning
[    4.696366] usb 2-10: new full-speed USB device number 5 using ohci-pci
[    4.710921] init: failsafe main process (662) killed by TERM signal
[    5.001820] init: samba-ad-dc main process (797) terminated with status 1
[    5.028219] autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
[    5.028226]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.028228]    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[    5.028229]    mono: mono_out=0x0
[    5.028230]    dig-out=0x1b/0x0
[    5.028231]    inputs:
[    5.028233]      Front Mic=0x14
[    5.028235]      Rear Mic=0x17
[    5.028236]      Line=0x15
[    5.028237]      CD=0x18
[    5.104199] usb 2-10: device not accepting address 5, error -62
[    5.135042] forcedeth 0000:00:08.0: irq 54 for MSI/MSI-X
[    5.135085] forcedeth 0000:00:08.0 rename2: MSI enabled
[    5.135301] forcedeth 0000:00:08.0 rename2: no link during initialization
[    5.135721] IPv6: ADDRCONF(NETDEV_UP): rename2: link is not ready
[    5.136299] IPv6: ADDRCONF(NETDEV_UP): rename2: link is not ready
[    5.143061] forcedeth 0000:00:09.0: irq 55 for MSI/MSI-X
[    5.143099] forcedeth 0000:00:09.0 eth1: MSI enabled
[    5.280224] usb 2-10: new full-speed USB device number 6 using ohci-pci
[    5.323723] init: alsa-restore main process (979) terminated with status 19
[    5.525736] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    5.542137] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.646321] fglrx_pci 0000:09:00.0: irq 56 for MSI/MSI-X
[    5.647170] <6>[fglrx] Firegl kernel thread PID: 1284
[    5.647259] <6>[fglrx] Firegl kernel thread PID: 1285
[    5.647345] <6>[fglrx] Firegl kernel thread PID: 1286
[    5.647451] <6>[fglrx] IRQ 56 Enabled
[    5.659123] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[    5.659127] <6>[fglrx] Reserved FB block: Unshared offset:f878000, size:4000 
[    5.659128] <6>[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000 
[    5.659130] <6>[fglrx] Reserved FB block: Unshared offset:7ffef000, size:11000 
[    5.688177] usb 2-10: device not accepting address 6, error -62
[    5.688212] hub 2-0:1.0: unable to enumerate USB device on port 10
[    6.133234] Netfilter messages via NETLINK v0.30.
[    6.411915] init: plymouth-upstart-bridge main process ended, respawning
[    6.426791] init: plymouth-upstart-bridge main process (1601) terminated with status 1
[    6.426808] init: plymouth-upstart-bridge main process ended, respawning
[    6.588218] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:06.1/sound/card0/input8
[    6.588467] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:06.1/sound/card0/input7
[    6.588546] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:06.1/sound/card0/input6
[    6.588610] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:06.1/sound/card0/input5
[    6.588674] input: HDA NVidia Line as /devices/pci0000:00/0000:00:06.1/sound/card0/input4
[    6.588736] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input3
[    6.589078] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    6.589245] hda-intel 0000:09:00.1: Handle VGA-switcheroo audio client
[    6.589250] hda-intel 0000:09:00.1: Using LPIB position fix
[    6.589251] hda-intel 0000:09:00.1: Force to non-snoop mode
[    6.589305] snd_hda_intel 0000:09:00.1: irq 57 for MSI/MSI-X
[    6.589356] EDAC amd64: DRAM ECC disabled.
[    6.589364] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    6.589364]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    6.589364]  (Note that use of the override may cause unknown side effects.)
[    6.591748] hda-intel 0000:09:00.1: Enable sync_write for stable communication
[    6.598276] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:0f.0/0000:09:00.1/sound/card1/input14
[    6.598558] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0f.0/0000:09:00.1/sound/card1/input13
[    6.598712] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0f.0/0000:09:00.1/sound/card1/input12
[    6.598803] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0f.0/0000:09:00.1/sound/card1/input11
[    6.598963] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0f.0/0000:09:00.1/sound/card1/input10
[    6.599063] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0f.0/0000:09:00.1/sound/card1/input9
[    6.687105] init: udev-fallback-graphics main process (1717) terminated with status 1
[    6.728429] init: plymouth-stop pre-start process (1739) terminated with status 1
[    6.754768] init: kdm main process (1753) killed by TERM signal
[   10.098149] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   14.855435] usb 2-10: new full-speed USB device number 7 using ohci-pci
[   15.039418] usb 2-10: device descriptor read/64, error -62
[   15.323409] usb 2-10: device descriptor read/64, error -62
[   15.603379] usb 2-10: new full-speed USB device number 8 using ohci-pci
[   15.787379] usb 2-10: device descriptor read/64, error -62
[   16.075345] usb 2-10: device descriptor read/64, error -62
[   16.355330] usb 2-10: new full-speed USB device number 9 using ohci-pci
[   16.763287] usb 2-10: device not accepting address 9, error -62
[   16.939292] usb 2-10: new full-speed USB device number 10 using ohci-pci
[   17.347247] usb 2-10: device not accepting address 10, error -62
[   17.347283] hub 2-0:1.0: unable to enumerate USB device on port 10
[   22.786829] usb 2-10: new full-speed USB device number 11 using ohci-pci
[   22.970801] usb 2-10: device descriptor read/64, error -62
[   23.258781] usb 2-10: device descriptor read/64, error -62
[   23.538758] usb 2-10: new full-speed USB device number 12 using ohci-pci
[   23.726742] usb 2-10: device descriptor read/64, error -62
[   24.014717] usb 2-10: device descriptor read/64, error -62
[   24.294700] usb 2-10: new full-speed USB device number 13 using ohci-pci
[   24.702656] usb 2-10: device not accepting address 13, error -62
[   24.878653] usb 2-10: new full-speed USB device number 14 using ohci-pci
[   25.286612] usb 2-10: device not accepting address 14, error -62
[   25.286643] hub 2-0:1.0: unable to enumerate USB device on port 10
[   34.761418] audit_printk_skb: 102 callbacks suppressed
[   34.761424] type=1400 audit(1399037751.313:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2990 comm="apparmor_parser"
[   34.761433] type=1400 audit(1399037751.313:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2990 comm="apparmor_parser"
[   34.761906] type=1400 audit(1399037751.313:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2990 comm="apparmor_parser"
[   36.037681] scsi 15:0:0:0: CD-ROM            CDEmu    Virt. CD/DVD-ROM 1.10 PQ: 0 ANSI: 0
[   36.039768] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[   36.039774] cdrom: Uniform CD-ROM driver Revision: 3.20
[   36.039927] sr 15:0:0:0: Attached scsi CD-ROM sr0
[   36.040009] sr 15:0:0:0: Attached scsi generic sg3 type 5
[   36.854058] systemd-hostnamed[3159]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[   39.734657] usb 2-10: new full-speed USB device number 15 using ohci-pci
[   40.318864] usb 2-10: device not accepting address 15, error -62
[   40.494970] usb 2-10: new full-speed USB device number 16 using ohci-pci
[   40.675059] usb 2-10: device descriptor read/64, error -62
[   40.963182] usb 2-10: device descriptor read/64, error -62
[   41.243265] usb 2-10: new full-speed USB device number 17 using ohci-pci
[   41.655437] usb 2-10: device not accepting address 17, error -62
[   41.831530] usb 2-10: new full-speed USB device number 18 using ohci-pci
[   42.239653] usb 2-10: device not accepting address 18, error -62
[   42.239690] hub 2-0:1.0: unable to enumerate USB device on port 10
[   43.088032] usb 2-10: new full-speed USB device number 19 using ohci-pci
[   43.684268] usb 2-10: device not accepting address 19, error -62
[   44.456600] usb 2-10: new full-speed USB device number 21 using ohci-pci
[   44.644691] usb 2-10: device descriptor read/64, error -62
[   46.173317] usb 2-10: new full-speed USB device number 23 using ohci-pci
[   46.353404] usb 2-10: device descriptor read/64, error -62
[   46.649524] usb 2-10: device descriptor read/64, error -62
[   47.509885] usb 2-10: new full-speed USB device number 25 using ohci-pci
[   47.689955] usb 2-10: device descriptor read/64, error -62
[   48.562333] usb 2-10: new full-speed USB device number 26 using ohci-pci
[   49.146572] usb 2-10: device not accepting address 26, error -62
[   49.894908] usb 2-10: new full-speed USB device number 28 using ohci-pci
[   50.074978] usb 2-10: device descriptor read/64, error -62
[   50.363083] usb 2-10: device descriptor read/64, error -62
[   51.207465] usb 2-10: new full-speed USB device number 30 using ohci-pci
[   51.391515] usb 2-10: device descriptor read/64, error -62
[   52.291893] usb 2-10: new full-speed USB device number 31 using ohci-pci
[   52.471967] usb 2-10: device descriptor read/64, error -62
[   52.756090] usb 2-10: device descriptor read/64, error -62
[   53.048216] usb 2-10: new full-speed USB device number 32 using ohci-pci
[   53.860559] usb 2-10: new full-speed USB device number 33 using ohci-pci
[   54.044632] usb 2-10: device descriptor read/64, error -62
[   54.328755] usb 2-10: device descriptor read/64, error -62
[   54.608871] usb 2-10: new full-speed USB device number 34 using ohci-pci
[   55.457237] usb 2-10: new full-speed USB device number 35 using ohci-pci
[   55.679019] usb 2-10: New USB device found, idVendor=046d, idProduct=c52b
[   55.679025] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   55.679028] usb 2-10: Product: USB Receiver
[   55.679030] usb 2-10: Manufacturer: Logitech
[   55.696361] hidraw: raw HID events driver (C) Jiri Kosina
[   55.717113] usbcore: registered new interface driver usbhid
[   55.717118] usbhid: USB HID core driver
[   55.726164] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-10/input2
[   55.732292] input: Logitech Unifying Device. Wireless PID:101d as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.2/0003:046D:C52B.0003/input/input15
[   55.732451] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101d] on usb-0000:00:02.0-10:1
[   56.705328] usb 2-10: USB disconnect, device number 35
[   57.554121] usb 2-10: new full-speed USB device number 36 using ohci-pci
[   57.775870] usb 2-10: New USB device found, idVendor=046d, idProduct=c52b
[   57.775875] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   57.775878] usb 2-10: Product: USB Receiver
[   57.775880] usb 2-10: Manufacturer: Logitech
[   57.807000] logitech-djreceiver 0003:046D:C52B.0007: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-10/input2
[   57.812213] input: Logitech Unifying Device. Wireless PID:101d as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.2/0003:046D:C52B.0007/input/input16
[   57.812981] logitech-djdevice 0003:046D:C52B.0008: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101d] on usb-0000:00:02.0-10:1

Vers 6.72 j'ai aussi le "init: plymouth-stop pre-start process (1739) terminated with status 1"

Dernière modification par Gaara (Le 02/05/2014, à 16:03)

nam1962 · Le 02/05/2014, à 16:26

Je remarque qu'on utilise tous les deux un microcode.
Vais essayer de le supprimer, vous dirais si il y a un effet (à propos, j'ai remis tlp : ca n'avait rien changé)
Tout le problème est de trouver ou ca merde pour pouvoir agir ou faire un rapport de bug !!

moko138 · Le 02/05/2014, à 16:49

@ Nam, regarde mon edit du #32.

@ tous les deux : avez-vous testé le remède bodhi ?

Gaara · Le 02/05/2014, à 16:56

Oui, j'ai essayé, mais il possède un driver proprio, et moi le driver libre.
Donc la commande /usr/share/ati/fglrx-uninstall --force ne donne rien, aucun fichier de ce type.

sudo apt-get update && sudo apt-get dist-upgrade && sudo apt-get install -f

Tout est ok, 0 mises à jours, aucune nouvelle install.
Je n'ai pas essayé de réinstaller fglrx qui de toutes façons sera le même que celui que j'utilise actuellement

nam1962 · Le 02/05/2014, à 16:57

Idem (en plus fglrx plante tout chez moi, donc je ne l'ai pas du tout du tout)

moko138 · Le 02/05/2014, à 17:00

Et forcer l'installation d'un noyau antérieur ?

nam1962 · Le 02/05/2014, à 17:09

De mon côté, à chaque fois que j'ai forcé un kernel, j'ai fini à plus ou moins brève échéance par une full install (en plus suis sur la 14.10) pour le moment préfère attendre le prochain (j'arrête pas de faire des update/full-upgrade mais suis comme soeur Anne pour le moment )
Pour Gaara, ptet ?

Gaara · Le 02/05/2014, à 17:16

Ben... pareil !
En fait, le noyau antérieur est déjà installé, je peux le choisir dans le grub.
Ce que je pourrais faire, c'est poster le dmesg du kernel 3.11, pour comparer les deux. Ça donnerait des pistes?
(Mais je dois bouger dans 1/4 d'h, je ferais ça se soir !)

Gaara · Le 02/05/2014, à 17:52

ça été plus rapide que prévu.
Voilà le dmesg du kernel 3.11

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-19-generic (buildd@comet) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #33-Ubuntu SMP Tue Mar 11 18:48:34 UTC 2014 (Ubuntu 3.11.0-19.33-generic 3.11.10.5)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-19-generic root=UUID=8aaa3972-e403-4475-866b-7c404383631d ro quiet splash vt.handoff=7                                                                                                                           
[    0.000000] KERNEL supported cpus:                                                                                                  
[    0.000000]   Intel GenuineIntel                                                                                                    
[    0.000000]   AMD AuthenticAMD                                                                                                      
[    0.000000]   Centaur CentaurHauls                                                                                                  
[    0.000000] e820: BIOS-provided physical RAM map:                                                                                   
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable                                                           
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved                                                         
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved                                                         
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfedffff] usable                                                           
[    0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS                                                         
[    0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] ACPI data                                                        
[    0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] reserved                                                         
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved                                                         
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved                                                         
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable                                                           
[    0.000000] NX (Execute Disable) protection: active                                                                                 
[    0.000000] SMBIOS 2.4 present.                                                                                                     
[    0.000000] DMI: System manufacturer System Product Name/M2N-SLI DELUXE, BIOS ASUS M2N-SLI DELUXE ACPI BIOS Revision 1701 10/02/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved                                                            
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable                                                                         
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000BFF00000 mask FFFFFFF00000 uncachable
[    0.000000]   3 base 000100000000 mask FFFF80000000 write-back
[    0.000000]   4 base 000180000000 mask FFFFC0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 00000001c0000000 aka 7168M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[    0.000000] reg 3, base: 4GB, range: 2GB, type WB
[    0.000000] reg 4, base: 6GB, range: 1GB, type WB
[    0.000000] total RAM covered: 3071M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 2M  num_reg: 3      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[    0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f5d00-0x000f5d0f] mapped at [ffff8800000f5d00]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1bfe00000-0x1bfffffff]
[    0.000000]  [mem 0x1bfe00000-0x1bfffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x1bc000000-0x1bfdfffff]
[    0.000000]  [mem 0x1bc000000-0x1bfdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x180000000-0x1bbffffff]
[    0.000000]  [mem 0x180000000-0x1bbffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbfedffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbfedffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[    0.000000]  [mem 0x100000000-0x17fffffff] page 1G
[    0.000000] RAMDISK: [mem 0x35278000-0x36933fff]
[    0.000000] ACPI: RSDP 00000000000f7db0 00024 (v02 Nvidia)
[    0.000000] ACPI: XSDT 00000000bfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 00000000bfeeadc0 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 00000000bfee3280 07ACE (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000bfee0000 00040
[    0.000000] ACPI: SSDT 00000000bfeeb000 00544 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 00000000bfeeb5c0 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[    0.000000] ACPI: MCFG 00000000bfeeb640 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 00000000bfeeaf00 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bfffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1bfffffff]
[    0.000000]   NODE_DATA [mem 0x1bfff9000-0x1bfffdfff]
[    0.000000]  [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b9600000-ffff8801bf5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1bfffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xbfedffff]
[    0.000000]   node   0: [mem 0x100000000-0x1bfffffff]
[    0.000000] On node 0 totalpages: 1572476
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12220 pages used for memmap
[    0.000000]   DMA32 zone: 782048 pages, LIFO batch:31
[    0.000000]   Normal zone: 12288 pages used for memmap
[    0.000000]   Normal zone: 786432 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfee0000-0xbfee2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfee3000-0xbfeeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfef0000-0xbfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xbff00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801bfc00000 s86720 r8192 d23872 u524288
[    0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1547883
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-19-generic root=UUID=8aaa3972-e403-4475-866b-7c404383631d ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ d7c6000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 6019684K/6289904K available (7154K kernel code, 1083K rwdata, 3312K rodata, 1368K init, 1420K bss, 270220K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 25165824 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2611.913 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.82 BogoMIPS (lpj=10447652)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000033] Security Framework initialized
[    0.000053] AppArmor: AppArmor initialized
[    0.000054] Yama: becoming mindful.
[    0.000746] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.003846] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005274] Mount-cache hash table entries: 256
[    0.005491] Initializing cgroup subsys memory
[    0.005505] Initializing cgroup subsys devices
[    0.005506] Initializing cgroup subsys freezer
[    0.005508] Initializing cgroup subsys blkio
[    0.005510] Initializing cgroup subsys perf_event
[    0.005513] Initializing cgroup subsys hugetlb
[    0.005535] tseg: 00bff00000
[    0.005539] CPU: Physical Processor ID: 0
[    0.005540] CPU: Processor Core ID: 0
[    0.005542] mce: CPU supports 6 MCE banks
[    0.005548] LVT offset 0 assigned for vector 0xf9
[    0.005552] process: using AMD E400 aware idle routine
[    0.005555] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.005555] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[    0.005555] tlb_flushall_shift: 4
[    0.005650] Freeing SMP alternatives memory: 28K (ffffffff81e66000 - ffffffff81e6d000)
[    0.007190] ACPI: Core revision 20130517
[    0.010670] ACPI: All ACPI Tables successfully acquired
[    0.012464] ftrace: allocating 27857 entries in 109 pages
[    0.024678] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064364] smpboot: CPU0: AMD Phenom(tm) 9950 Quad-Core Processor (fam: 10, model: 02, stepping: 03)
[    0.168793] Performance Events: AMD PMU driver.
[    0.168797] ... version:                0
[    0.168799] ... bit width:              48
[    0.168800] ... generic registers:      4
[    0.168801] ... value mask:             0000ffffffffffff
[    0.168802] ... max period:             00007fffffffffff
[    0.168803] ... fixed-purpose events:   0
[    0.168804] ... event mask:             000000000000000f
[    0.170459] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.170542] smpboot: Booting Node   0, Processors  #1 #2 #3 OK
[    0.209837] Brought up 4 CPUs
[    0.209840] smpboot: Total of 4 processors activated (20895.30 BogoMIPS)
[    0.212205] devtmpfs: initialized
[    0.214233] EVM: security.selinux
[    0.214235] EVM: security.SMACK64
[    0.214236] EVM: security.capability
[    0.214299] PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes)
[    0.215384] regulator-dummy: no parameters
[    0.215421] RTC time: 17:40:39, date: 05/02/14
[    0.215470] NET: Registered protocol family 16
[    0.215595] node 0 link 0: io port [5000, ffff]
[    0.215597] TOM: 00000000c0000000 aka 3072M
[    0.215600] Fam 10h mmconf [mem 0xf0000000-0xf00fffff]
[    0.215602] node 0 link 0: mmio [a0000, bffff]
[    0.215605] node 0 link 0: mmio [c0000000, efffffff]
[    0.215607] node 0 link 0: mmio [f4000000, fe02ffff]
[    0.215608] node 0 link 0: mmio [f0000000, f09fffff] ==> [f0100000, f09fffff]
[    0.215611] TOM2: 00000001c0000000 aka 7168M
[    0.215613] bus: [bus 00-09] on node 0 link 0
[    0.215614] bus: 00 [io  0x0000-0xffff]
[    0.215616] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.215617] bus: 00 [mem 0xc0000000-0xefffffff]
[    0.215618] bus: 00 [mem 0xf0a00000-0xffffffff]
[    0.215619] bus: 00 [mem 0xf0100000-0xf09fffff]
[    0.215620] bus: 00 [mem 0x1c0000000-0xfcffffffff]
[    0.215673] ACPI: bus type PCI registered
[    0.215676] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.215738] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.215741] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.218028] PCI: Using configuration type 1 for base access
[    0.219134] bio: create slab <bio-0> at 0
[    0.219313] ACPI: Added _OSI(Module Device)
[    0.219314] ACPI: Added _OSI(Processor Device)
[    0.219316] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.219317] ACPI: Added _OSI(Processor Aggregator Device)
[    0.220377] ACPI: EC: Look up EC in DSDT
[    0.225576] ACPI: Interpreter enabled
[    0.225592] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.225605] ACPI: (supports S0 S1 S3 S4 S5)
[    0.225607] ACPI: Using IOAPIC for interrupt routing
[    0.225634] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.225740] ACPI: No dock devices found.
[    0.233405] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.233413] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.233415] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.233488] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.233643] PCI host bridge to bus 0000:00
[    0.233646] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.233648] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.233650] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.233652] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.233654] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.233656] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff]
[    0.233679] pci 0000:00:00.0: [10de:0369] type 00 class 0x050000
[    0.233929] pci 0000:00:01.0: [10de:0360] type 00 class 0x060100
[    0.234030] pci 0000:00:01.1: [10de:0368] type 00 class 0x0c0500
[    0.234041] pci 0000:00:01.1: reg 0x10: [io  0xfc00-0xfc3f]
[    0.234057] pci 0000:00:01.1: reg 0x20: [io  0x1c00-0x1c3f]
[    0.234062] pci 0000:00:01.1: reg 0x24: [io  0x1c40-0x1c7f]
[    0.234092] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.234180] pci 0000:00:02.0: [10de:036c] type 00 class 0x0c0310
[    0.234187] pci 0000:00:02.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
[    0.234216] pci 0000:00:02.0: supports D1 D2
[    0.234217] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.234274] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.234301] pci 0000:00:02.1: [10de:036d] type 00 class 0x0c0320
[    0.234308] pci 0000:00:02.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
[    0.234337] pci 0000:00:02.1: supports D1 D2
[    0.234339] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.234409] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.234442] pci 0000:00:04.0: [10de:036e] type 00 class 0x01018a
[    0.234457] pci 0000:00:04.0: reg 0x20: [io  0xf000-0xf00f]
[    0.234544] pci 0000:00:05.0: [10de:037f] type 00 class 0x010185
[    0.234552] pci 0000:00:05.0: reg 0x10: [io  0x09f0-0x09f7]
[    0.234556] pci 0000:00:05.0: reg 0x14: [io  0x0bf0-0x0bf3]
[    0.234560] pci 0000:00:05.0: reg 0x18: [io  0x0970-0x0977]
[    0.234563] pci 0000:00:05.0: reg 0x1c: [io  0x0b70-0x0b73]
[    0.234567] pci 0000:00:05.0: reg 0x20: [io  0xdc00-0xdc0f]
[    0.234572] pci 0000:00:05.0: reg 0x24: [mem 0xfe02d000-0xfe02dfff]
[    0.234662] pci 0000:00:05.1: [10de:037f] type 00 class 0x010185
[    0.234670] pci 0000:00:05.1: reg 0x10: [io  0x09e0-0x09e7]
[    0.234674] pci 0000:00:05.1: reg 0x14: [io  0x0be0-0x0be3]
[    0.234678] pci 0000:00:05.1: reg 0x18: [io  0x0960-0x0967]
[    0.234681] pci 0000:00:05.1: reg 0x1c: [io  0x0b60-0x0b63]
[    0.234685] pci 0000:00:05.1: reg 0x20: [io  0xc800-0xc80f]
[    0.234690] pci 0000:00:05.1: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
[    0.234779] pci 0000:00:05.2: [10de:037f] type 00 class 0x010185
[    0.234787] pci 0000:00:05.2: reg 0x10: [io  0xc400-0xc407]
[    0.234791] pci 0000:00:05.2: reg 0x14: [io  0xc000-0xc003]
[    0.234795] pci 0000:00:05.2: reg 0x18: [io  0xbc00-0xbc07]
[    0.234799] pci 0000:00:05.2: reg 0x1c: [io  0xb800-0xb803]
[    0.234803] pci 0000:00:05.2: reg 0x20: [io  0xb400-0xb40f]
[    0.234807] pci 0000:00:05.2: reg 0x24: [mem 0xfe02b000-0xfe02bfff]
[    0.234901] pci 0000:00:06.0: [10de:0370] type 01 class 0x060401
[    0.234973] pci 0000:00:06.0: System wakeup disabled by ACPI
[    0.235001] pci 0000:00:06.1: [10de:0371] type 00 class 0x040300
[    0.235010] pci 0000:00:06.1: reg 0x10: [mem 0xfe020000-0xfe023fff]
[    0.235044] pci 0000:00:06.1: PME# supported from D3hot D3cold
[    0.235100] pci 0000:00:06.1: System wakeup disabled by ACPI
[    0.235133] pci 0000:00:08.0: [10de:0373] type 00 class 0x068000
[    0.235144] pci 0000:00:08.0: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[    0.235148] pci 0000:00:08.0: reg 0x14: [io  0xb000-0xb007]
[    0.235152] pci 0000:00:08.0: reg 0x18: [mem 0xfe029000-0xfe0290ff]
[    0.235156] pci 0000:00:08.0: reg 0x1c: [mem 0xfe028000-0xfe02800f]
[    0.235186] pci 0000:00:08.0: supports D1 D2
[    0.235187] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.235247] pci 0000:00:08.0: System wakeup disabled by ACPI
[    0.235276] pci 0000:00:09.0: [10de:0373] type 00 class 0x068000
[    0.235286] pci 0000:00:09.0: reg 0x10: [mem 0xfe027000-0xfe027fff]
[    0.235290] pci 0000:00:09.0: reg 0x14: [io  0xac00-0xac07]
[    0.235294] pci 0000:00:09.0: reg 0x18: [mem 0xfe026000-0xfe0260ff]
[    0.235298] pci 0000:00:09.0: reg 0x1c: [mem 0xfe025000-0xfe02500f]
[    0.235328] pci 0000:00:09.0: supports D1 D2
[    0.235329] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.235388] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.235415] pci 0000:00:0a.0: [10de:0376] type 01 class 0x060400
[    0.235441] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.235499] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.235528] pci 0000:00:0e.0: [10de:0375] type 01 class 0x060400
[    0.235552] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.235610] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.235637] pci 0000:00:0f.0: [10de:0377] type 01 class 0x060400
[    0.235662] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.235717] pci 0000:00:0f.0: System wakeup disabled by ACPI
[    0.235749] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.235830] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.235906] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.235981] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.236059] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.236172] pci 0000:01:0b.0: [104c:8023] type 00 class 0x0c0010
[    0.236183] pci 0000:01:0b.0: reg 0x10: [mem 0xfdeff000-0xfdeff7ff]
[    0.236189] pci 0000:01:0b.0: reg 0x14: [mem 0xfdef8000-0xfdefbfff]
[    0.236229] pci 0000:01:0b.0: supports D1 D2
[    0.236230] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot
[    0.236271] pci 0000:00:06.0: PCI bridge to [bus 01] (subtractive decode)
[    0.236275] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.236277] pci 0000:00:06.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.236279] pci 0000:00:06.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.236281] pci 0000:00:06.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.236283] pci 0000:00:06.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.236285] pci 0000:00:06.0:   bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
[    0.236325] pci 0000:02:00.0: [10b5:8608] type 01 class 0x060400
[    0.236334] pci 0000:02:00.0: reg 0x10: [mem 0xfdde0000-0xfddfffff]
[    0.236380] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.240799] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
[    0.240802] pci 0000:00:0a.0:   bridge window [io  0x8000-0x9fff]
[    0.240805] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfddfffff]
[    0.240857] pci 0000:03:01.0: [10b5:8608] type 01 class 0x060400
[    0.240910] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
[    0.240959] pci 0000:03:05.0: [10b5:8608] type 01 class 0x060400
[    0.241012] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
[    0.241055] pci 0000:03:07.0: [10b5:8608] type 01 class 0x060400
[    0.241107] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold
[    0.241151] pci 0000:03:09.0: [10b5:8608] type 01 class 0x060400
[    0.241204] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
[    0.241253] pci 0000:02:00.0: PCI bridge to [bus 03-07]
[    0.241258] pci 0000:02:00.0:   bridge window [io  0x8000-0x9fff]
[    0.241261] pci 0000:02:00.0:   bridge window [mem 0xfdb00000-0xfdcfffff]
[    0.241322] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[    0.241341] pci 0000:04:00.0: reg 0x10: [mem 0xfdcfe000-0xfdcfffff 64bit]
[    0.241431] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.248797] pci 0000:03:01.0: PCI bridge to [bus 04]
[    0.248803] pci 0000:03:01.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.248860] pci 0000:05:00.0: [1b4b:9120] type 00 class 0x010601
[    0.248872] pci 0000:05:00.0: reg 0x10: [io  0x9c00-0x9c07]
[    0.248881] pci 0000:05:00.0: reg 0x14: [io  0x9800-0x9803]
[    0.248889] pci 0000:05:00.0: reg 0x18: [io  0x9400-0x9407]
[    0.248897] pci 0000:05:00.0: reg 0x1c: [io  0x9000-0x9003]
[    0.248906] pci 0000:05:00.0: reg 0x20: [io  0x8c00-0x8c0f]
[    0.248914] pci 0000:05:00.0: reg 0x24: [mem 0xfdbff000-0xfdbff7ff]
[    0.248923] pci 0000:05:00.0: reg 0x30: [mem 0xfdbe0000-0xfdbeffff pref]
[    0.248961] pci 0000:05:00.0: PME# supported from D3hot
[    0.256794] pci 0000:03:05.0: PCI bridge to [bus 05]
[    0.256798] pci 0000:03:05.0:   bridge window [io  0x8000-0x9fff]
[    0.256802] pci 0000:03:05.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.256848] pci 0000:03:07.0: PCI bridge to [bus 06]
[    0.256898] pci 0000:03:09.0: PCI bridge to [bus 07]
[    0.256960] pci 0000:08:00.0: [197b:2363] type 00 class 0x010400
[    0.257018] pci 0000:08:00.0: reg 0x24: [mem 0xfdafe000-0xfdafffff]
[    0.257028] pci 0000:08:00.0: reg 0x30: [mem 0xfdae0000-0xfdaeffff pref]
[    0.257062] pci 0000:08:00.0: PME# supported from D3hot
[    0.257103] pci 0000:08:00.1: [197b:2363] type 00 class 0x010185
[    0.257120] pci 0000:08:00.1: reg 0x10: [io  0x7c00-0x7c07]
[    0.257129] pci 0000:08:00.1: reg 0x14: [io  0x7800-0x7803]
[    0.257139] pci 0000:08:00.1: reg 0x18: [io  0x7400-0x7407]
[    0.257148] pci 0000:08:00.1: reg 0x1c: [io  0x7000-0x7003]
[    0.257157] pci 0000:08:00.1: reg 0x20: [io  0x6c00-0x6c0f]
[    0.257230] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.257236] pci 0000:00:0e.0: PCI bridge to [bus 08]
[    0.257239] pci 0000:00:0e.0:   bridge window [io  0x6000-0x7fff]
[    0.257242] pci 0000:00:0e.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.257285] pci 0000:09:00.0: [1002:6819] type 00 class 0x030000
[    0.257298] pci 0000:09:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.257307] pci 0000:09:00.0: reg 0x18: [mem 0xfd980000-0xfd9bffff 64bit]
[    0.257314] pci 0000:09:00.0: reg 0x20: [io  0x5c00-0x5cff]
[    0.257325] pci 0000:09:00.0: reg 0x30: [mem 0xfd9c0000-0xfd9dffff pref]
[    0.257361] pci 0000:09:00.0: supports D1 D2
[    0.257362] pci 0000:09:00.0: PME# supported from D1 D2 D3hot
[    0.257407] pci 0000:09:00.1: [1002:aab0] type 00 class 0x040300
[    0.257419] pci 0000:09:00.1: reg 0x10: [mem 0xfd9fc000-0xfd9fffff 64bit]
[    0.257478] pci 0000:09:00.1: supports D1 D2
[    0.264792] pci 0000:00:0f.0: PCI bridge to [bus 09]
[    0.264795] pci 0000:00:0f.0:   bridge window [io  0x5000-0x5fff]
[    0.264797] pci 0000:00:0f.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.264800] pci 0000:00:0f.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.265509] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.265571] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.265623] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.265675] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.265733] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.265792] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[    0.265842] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[    0.265888] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 *10 11 14 15)
[    0.265946] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.266002] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[    0.266055] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[    0.266114] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)
[    0.266169] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[    0.266224] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.266281] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[    0.266331] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[    0.266388] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.266444] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.266494] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[    0.266549] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
[    0.266647] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.266728] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.266813] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.266904] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.266988] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.267074] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[    0.267159] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[    0.267240] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
[    0.267323] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.267414] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.267501] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[    0.267588] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.267669] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.267749] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.267835] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.267926] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.268015] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.268105] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.268188] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.268278] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[    0.268438] ACPI: Enabled 1 GPEs in block 20 to 5F
[    0.268446] ACPI: \_SB_.PCI0: notify handler is installed
[    0.268492] Found 1 acpi root devices
[    0.268611] vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.268613] vgaarb: loaded
[    0.268613] vgaarb: bridge control possible 0000:09:00.0
[    0.268795] SCSI subsystem initialized
[    0.268797] ACPI: bus type ATA registered
[    0.268847] libata version 3.00 loaded.
[    0.268862] ACPI: bus type USB registered
[    0.268881] usbcore: registered new interface driver usbfs
[    0.268889] usbcore: registered new interface driver hub
[    0.268912] usbcore: registered new device driver usb
[    0.269030] PCI: Using ACPI for IRQ routing
[    0.270074] PCI: pci_cache_line_size set to 64 bytes
[    0.270128] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.270131] e820: reserve RAM buffer [mem 0xbfee0000-0xbfffffff]
[    0.270220] NetLabel: Initializing
[    0.270221] NetLabel:  domain hash size = 128
[    0.270222] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.270235] NetLabel:  unlabeled traffic allowed by default
[    0.270297] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.270302] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[    0.270306] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.272542] Switched to clocksource hpet
[    0.277927] AppArmor: AppArmor Filesystem Enabled
[    0.277961] pnp: PnP ACPI init
[    0.277980] ACPI: bus type PNP registered
[    0.278119] system 00:00: [io  0x1000-0x107f] has been reserved
[    0.278122] system 00:00: [io  0x1080-0x10ff] has been reserved
[    0.278124] system 00:00: [io  0x1400-0x147f] has been reserved
[    0.278126] system 00:00: [io  0x1480-0x14ff] has been reserved
[    0.278128] system 00:00: [io  0x1800-0x187f] has been reserved
[    0.278130] system 00:00: [io  0x1880-0x18ff] has been reserved
[    0.278134] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278236] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.278238] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.278240] system 00:01: [io  0x0290-0x0297] has been reserved
[    0.278242] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278252] pnp 00:02: [dma 4]
[    0.278268] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.278355] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.278398] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.278421] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.278447] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.278786] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.279137] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.279264] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.279921] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.279924] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.280086] system 00:0b: [mem 0x000d6400-0x000d7fff] has been reserved
[    0.280089] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.280091] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.280093] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.280095] system 00:0b: [mem 0xfefff000-0xfefff0ff] has been reserved
[    0.280097] system 00:0b: [mem 0xbfee0000-0xbfefffff] could not be reserved
[    0.280099] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[    0.280101] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.280103] system 00:0b: [mem 0x00100000-0xbfedffff] could not be reserved
[    0.280105] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.280107] system 00:0b: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.280109] system 00:0b: [mem 0xfefff000-0xfeffffff] could not be reserved
[    0.280111] system 00:0b: [mem 0xfff80000-0xfff80fff] has been reserved
[    0.280113] system 00:0b: [mem 0xfff90000-0xfffbffff] has been reserved
[    0.280115] system 00:0b: [mem 0xfffed000-0xfffeffff] has been reserved
[    0.280117] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.280125] pnp: PnP ACPI: found 12 devices
[    0.280126] ACPI: bus type PNP unregistered
[    0.286570] pci 0000:00:06.0: PCI bridge to [bus 01]
[    0.286575] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.286580] pci 0000:03:01.0: PCI bridge to [bus 04]
[    0.286584] pci 0000:03:01.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.286591] pci 0000:03:05.0: PCI bridge to [bus 05]
[    0.286593] pci 0000:03:05.0:   bridge window [io  0x8000-0x9fff]
[    0.286597] pci 0000:03:05.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.286603] pci 0000:03:07.0: PCI bridge to [bus 06]
[    0.286611] pci 0000:03:09.0: PCI bridge to [bus 07]
[    0.286619] pci 0000:02:00.0: PCI bridge to [bus 03-07]
[    0.286621] pci 0000:02:00.0:   bridge window [io  0x8000-0x9fff]
[    0.286625] pci 0000:02:00.0:   bridge window [mem 0xfdb00000-0xfdcfffff]
[    0.286631] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
[    0.286633] pci 0000:00:0a.0:   bridge window [io  0x8000-0x9fff]
[    0.286636] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfddfffff]
[    0.286639] pci 0000:00:0e.0: PCI bridge to [bus 08]
[    0.286641] pci 0000:00:0e.0:   bridge window [io  0x6000-0x7fff]
[    0.286644] pci 0000:00:0e.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.286648] pci 0000:00:0f.0: PCI bridge to [bus 09]
[    0.286650] pci 0000:00:0f.0:   bridge window [io  0x5000-0x5fff]
[    0.286652] pci 0000:00:0f.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.286655] pci 0000:00:0f.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.286664] pci 0000:00:06.0: setting latency timer to 64
[    0.286930] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[    0.287140] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[    0.287407] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[    0.287492] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.287494] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.287496] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.287498] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.287499] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
[    0.287502] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.287503] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.287505] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.287507] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.287508] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
[    0.287510] pci_bus 0000:01: resource 8 [mem 0xbff00000-0xfebfffff]
[    0.287512] pci_bus 0000:02: resource 0 [io  0x8000-0x9fff]
[    0.287514] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfddfffff]
[    0.287516] pci_bus 0000:03: resource 0 [io  0x8000-0x9fff]
[    0.287518] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdcfffff]
[    0.287520] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.287521] pci_bus 0000:05: resource 0 [io  0x8000-0x9fff]
[    0.287523] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    0.287525] pci_bus 0000:08: resource 0 [io  0x6000-0x7fff]
[    0.287527] pci_bus 0000:08: resource 1 [mem 0xfda00000-0xfdafffff]
[    0.287529] pci_bus 0000:09: resource 0 [io  0x5000-0x5fff]
[    0.287530] pci_bus 0000:09: resource 1 [mem 0xfd900000-0xfd9fffff]
[    0.287532] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.287573] NET: Registered protocol family 2
[    0.287796] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.288201] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.288612] TCP: Hash tables configured (established 65536 bind 65536)
[    0.288671] TCP: reno registered
[    0.288683] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.288747] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.288888] NET: Registered protocol family 1
[    0.289191] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.360915] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.361086] pci 0000:00:05.0: Enabling HT MSI Mapping
[    0.361132] pci 0000:00:05.1: Enabling HT MSI Mapping
[    0.361176] pci 0000:00:05.2: Enabling HT MSI Mapping
[    0.361220] pci 0000:00:06.0: Enabling HT MSI Mapping
[    0.361268] pci 0000:00:06.1: Enabling HT MSI Mapping
[    0.361324] pci 0000:00:08.0: Enabling HT MSI Mapping
[    0.361384] pci 0000:00:09.0: Enabling HT MSI Mapping
[    0.361444] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    0.361509] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    0.361577] pci 0000:00:0f.0: Enabling HT MSI Mapping
[    0.361791] pci 0000:09:00.0: Boot video device
[    0.361796] PCI: CLS 32 bytes, default 64
[    0.361848] Trying to unpack rootfs image as initramfs...
[    0.765504] Freeing initrd memory: 23280K (ffff880035278000 - ffff880036934000)
[    0.765858] PCI-DMA: Disabling AGP.
[    0.766959] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    0.766960] PCI-DMA: using GART IOMMU.
[    0.766963] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.771021] LVT offset 1 assigned for vector 0x400
[    0.771034] IBS: LVT offset 1 assigned
[    0.771066] perf: AMD IBS detected (0x00000007)
[    0.771098] Scanning for low memory corruption every 60 seconds
[    0.771295] Initialise module verification
[    0.771339] audit: initializing netlink socket (disabled)
[    0.771353] type=2000 audit(1399052439.664:1): initialized
[    0.796174] bounce pool size: 64 pages
[    0.796184] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.797545] zbud: loaded
[    0.797683] VFS: Disk quotas dquot_6.5.2
[    0.797734] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.798249] fuse init (API version 7.22)
[    0.798318] msgmni has been set to 11931
[    0.798846] Key type asymmetric registered
[    0.798852] Asymmetric key parser 'x509' registered
[    0.798919] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.798984] io scheduler noop registered
[    0.798989] io scheduler deadline registered (default)
[    0.799043] io scheduler cfq registered
[    0.799189] pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X
[    0.799246] pcieport 0000:00:0e.0: irq 41 for MSI/MSI-X
[    0.799295] pcieport 0000:00:0f.0: irq 42 for MSI/MSI-X
[    0.799351] pcieport 0000:02:00.0: irq 43 for MSI/MSI-X
[    0.799419] pcieport 0000:03:01.0: irq 44 for MSI/MSI-X
[    0.799486] pcieport 0000:03:05.0: irq 45 for MSI/MSI-X
[    0.799555] pcieport 0000:03:07.0: irq 46 for MSI/MSI-X
[    0.799621] pcieport 0000:03:09.0: irq 47 for MSI/MSI-X
[    0.799686] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.799702] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.799832] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.799837] ACPI: Power Button [PWRB]
[    0.799883] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.799885] ACPI: Power Button [PWRF]
[    0.799925] ACPI: Fan [FAN] (on)
[    0.800203] ACPI: [Package] has zero elements (ffff8801b4a8f000)
[    0.800204] ACPI: Invalid passive threshold
[    0.800405] thermal LNXTHERM:00: registered as thermal_zone0
[    0.800407] ACPI: Thermal Zone [THRM] (40 C)
[    0.800429] GHES: HEST is not enabled!
[    0.800533] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.820877] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.822183] Linux agpgart interface v0.103
[    0.823513] brd: module loaded
[    0.824212] loop: module loaded
[    0.824656] libphy: Fixed MDIO Bus: probed
[    0.824736] tun: Universal TUN/TAP device driver, 1.6
[    0.824737] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.824791] PPP generic driver version 2.4.2
[    0.824850] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.824852] ehci-pci: EHCI PCI platform driver
[    0.825022] ehci-pci 0000:00:02.1: setting latency timer to 64
[    0.825042] ehci-pci 0000:00:02.1: EHCI Host Controller
[    0.825050] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.825058] ehci-pci 0000:00:02.1: debug port 1
[    0.825078] ehci-pci 0000:00:02.1: cache line size of 32 is not supported
[    0.825100] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
[    0.836518] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.836540] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.836542] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.836544] usb usb1: Product: EHCI Host Controller
[    0.836545] usb usb1: Manufacturer: Linux 3.11.0-19-generic ehci_hcd
[    0.836547] usb usb1: SerialNumber: 0000:00:02.1
[    0.836668] hub 1-0:1.0: USB hub found
[    0.836673] hub 1-0:1.0: 10 ports detected
[    0.836830] ehci-platform: EHCI generic platform driver
[    0.836840] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.836842] ohci-pci: OHCI PCI platform driver
[    0.836963] ohci-pci 0000:00:02.0: setting latency timer to 64
[    0.836966] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    0.836972] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.836996] ohci-pci 0000:00:02.0: irq 23, io mem 0xfe02f000
[    0.894526] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.894528] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.894530] usb usb2: Product: OHCI PCI host controller
[    0.894532] usb usb2: Manufacturer: Linux 3.11.0-19-generic ohci_hcd
[    0.894533] usb usb2: SerialNumber: 0000:00:02.0
[    0.894612] hub 2-0:1.0: USB hub found
[    0.894618] hub 2-0:1.0: 10 ports detected
[    0.894772] ohci-platform: OHCI generic platform driver
[    0.894778] uhci_hcd: USB Universal Host Controller Interface driver
[    0.894917] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.894923] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.895085] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[    0.895092] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[    0.895098] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
[    0.895104] xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
[    0.895110] xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X
[    0.895199] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.895201] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.895203] usb usb3: Product: xHCI Host Controller
[    0.895204] usb usb3: Manufacturer: Linux 3.11.0-19-generic xhci_hcd
[    0.895206] usb usb3: SerialNumber: 0000:04:00.0
[    0.895267] xHCI xhci_add_endpoint called for root hub
[    0.895268] xHCI xhci_check_bandwidth called for root hub
[    0.895287] hub 3-0:1.0: USB hub found
[    0.895293] hub 3-0:1.0: 2 ports detected
[    0.895355] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.895358] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.898416] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.898418] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.898420] usb usb4: Product: xHCI Host Controller
[    0.898421] usb usb4: Manufacturer: Linux 3.11.0-19-generic xhci_hcd
[    0.898423] usb usb4: SerialNumber: 0000:04:00.0
[    0.898477] xHCI xhci_add_endpoint called for root hub
[    0.898478] xHCI xhci_check_bandwidth called for root hub
[    0.898496] hub 4-0:1.0: USB hub found
[    0.898507] hub 4-0:1.0: 2 ports detected
[    0.904570] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.904572] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.904733] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.904820] mousedev: PS/2 mouse device common for all mice
[    0.904940] rtc_cmos 00:04: RTC can wake from S4
[    0.905074] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.905109] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.905172] device-mapper: uevent: version 1.0.3
[    0.905223] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    0.905229] cpuidle: using governor ladder
[    0.905231] cpuidle: using governor menu
[    0.905240] ledtrig-cpu: registered to indicate activity on CPUs
[    0.905335] TCP: cubic registered
[    0.905427] NET: Registered protocol family 10
[    0.905626] NET: Registered protocol family 17
[    0.905635] Key type dns_resolver registered
[    0.905909] PM: Hibernation image not present or could not be loaded.
[    0.905912] Loading module verification certificates
[    0.906963] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5553b4b7b74ebe0a90f93fbc0d8e2b9c98211b47'
[    0.906975] registered taskstats version 1
[    0.909736] Key type trusted registered
[    0.911668] Key type encrypted registered
[    0.913607] AppArmor: AppArmor sha1 policy hashing enabled
[    0.913981]   Magic number: 14:79:693
[    0.914097] rtc_cmos 00:04: setting system clock to 2014-05-02 17:40:40 UTC (1399052440)
[    0.914203] acpi-cpufreq: overriding BIOS provided _PSD data
[    0.914312] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.914313] EDD information not available.
[    0.915637] Freeing unused kernel memory: 1368K (ffffffff81d10000 - ffffffff81e66000)
[    0.915642] Write protecting the kernel read-only data: 12288k
[    0.918369] Freeing unused kernel memory: 1028K (ffff8800016ff000 - ffff880001800000)
[    0.920264] Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
[    0.932025] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.935283] systemd-udevd[116]: starting version 204
[    0.954889] pata_amd 0000:00:04.0: version 0.4.1
[    0.954926] pata_amd 0000:00:04.0: setting latency timer to 64
[    0.955263] scsi0 : pata_amd
[    0.955495] scsi1 : pata_amd
[    0.955643] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.955645] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.955686] ata1: port disabled--ignoring
[    0.955711] ata2: port disabled--ignoring
[    0.955738] sata_nv 0000:00:05.0: version 3.5
[    0.955964] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    0.955984] sata_nv 0000:00:05.0: Using SWNCQ mode
[    0.956580] sata_nv 0000:00:05.0: setting latency timer to 64
[    0.956840] scsi2 : sata_nv
[    0.956935] scsi3 : sata_nv
[    0.956984] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
[    0.956986] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
[    0.957254] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[    0.957273] sata_nv 0000:00:05.1: Using SWNCQ mode
[    0.957830] sata_nv 0000:00:05.1: setting latency timer to 64
[    0.958095] scsi4 : sata_nv
[    0.958316] scsi5 : sata_nv
[    0.958374] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
[    0.958376] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
[    0.960916] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
[    0.960925] sata_nv 0000:00:05.2: Using SWNCQ mode
[    0.961481] sata_nv 0000:00:05.2: setting latency timer to 64
[    0.961872] scsi6 : sata_nv
[    0.961997] scsi7 : sata_nv
[    0.962049] ata7: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 23
[    0.962051] ata8: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 23
[    0.964592] pata_acpi 0000:08:00.1: enabling device (0000 -> 0001)
[    0.964732] pata_acpi 0000:08:00.1: setting latency timer to 64
[    0.964825] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    0.965034] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[    0.965037] forcedeth 0000:00:08.0: setting latency timer to 64
[    0.965811] ahci 0000:05:00.0: version 3.0
[    0.965955] ahci 0000:05:00.0: irq 53 for MSI/MSI-X
[    0.966010] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.966013] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    0.966307] scsi8 : ahci
[    0.966374] scsi9 : ahci
[    0.966409] ata9: SATA max UDMA/133 abar m2048@0xfdbff000 port 0xfdbff100 irq 53
[    0.966412] ata10: SATA max UDMA/133 abar m2048@0xfdbff000 port 0xfdbff180 irq 53
[    0.967985] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    0.980541] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.980548] ahci 0000:08:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.980998] scsi10 : ahci
[    0.981085] scsi11 : ahci
[    0.981127] ata11: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 16
[    0.981130] ata12: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 16
[    0.981368] pata_jmicron 0000:08:00.1: setting latency timer to 64
[    0.981918] scsi12 : pata_jmicron
[    0.981994] scsi13 : pata_jmicron
[    0.982032] ata13: PATA max UDMA/100 cmd 0x7c00 ctl 0x7800 bmdma 0x6c00 irq 16
[    0.982034] ata14: PATA max UDMA/100 cmd 0x7400 ctl 0x7000 bmdma 0x6c08 irq 16
[    1.028529] firewire_ohci 0000:01:0b.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.148498] usb 1-2: new high-speed USB device number 2 using ehci-pci
[    1.268495] ata3: SATA link down (SStatus 0 SControl 300)
[    1.272486] ata5: SATA link down (SStatus 0 SControl 300)
[    1.276491] ata7: SATA link down (SStatus 0 SControl 300)
[    1.280834] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[    1.280837] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.281018] hub 1-2:1.0: USB hub found
[    1.281083] hub 1-2:1.0: 4 ports detected
[    1.300512] ata11: SATA link down (SStatus 0 SControl 300)
[    1.304499] ata12: SATA link down (SStatus 0 SControl 300)
[    1.392467] usb 1-3: new high-speed USB device number 3 using ehci-pci
[    1.456477] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[    1.457534] ata10.00: ATA-8: ST750LX003-1AC154, SM12, max UDMA/133
[    1.457537] ata10.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.459733] ata10.00: configured for UDMA/133
[    1.460474] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[    1.460727] ata9.00: supports DRM functions and may not be fully accessible
[    1.460758] ata9.00: ATA-9: Crucial_CT240M500SSD1, MU03, max UDMA/133
[    1.460760] ata9.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.464281] ata9.00: supports DRM functions and may not be fully accessible
[    1.467577] ata9.00: configured for UDMA/133
[    1.488981] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 04:4b:80:80:80:03
[    1.488984] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[    1.489297] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[    1.489304] forcedeth 0000:00:09.0: setting latency timer to 64
[    1.525934] usb 1-3: New USB device found, idVendor=04a9, idProduct=1909
[    1.525937] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.525939] usb 1-3: Product: CanoScan
[    1.525940] usb 1-3: Manufacturer: Canon
[    1.528519] firewire_core 0000:01:0b.0: created device fw0: GUID 0011d80000f17f95, S400
[    1.580465] ata4: SATA link down (SStatus 0 SControl 300)
[    1.636458] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    1.697397] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[    1.697399] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.697401] usb 3-1: Product: USB Receiver
[    1.697403] usb 3-1: Manufacturer: Logitech
[    1.708628] hidraw: raw HID events driver (C) Jiri Kosina
[    1.762432] usbcore: registered new interface driver usbhid
[    1.762436] usbhid: USB HID core driver
[    1.768453] tsc: Refined TSC clocksource calibration: 2612.037 MHz
[    1.776528] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:04:00.0-1/input2
[    1.786611] input: Logitech Unifying Device. Wireless PID:101d as /devices/pci0000:00/0000:00:0a.0/0000:02:00.0/0000:03:01.0/0000:04:00.0/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/input/input3
[    1.786738] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101d] on usb-0000:04:00.0-1:1
[    1.792544] usb 1-2.2: new high-speed USB device number 4 using ehci-pci
[    1.902156] usb 1-2.2: New USB device found, idVendor=058f, idProduct=6366
[    1.902158] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.902160] usb 1-2.2: Product: Mass Storage Device
[    1.902162] usb 1-2.2: Manufacturer: Generic
[    1.902163] usb 1-2.2: SerialNumber: 058F63666433
[    1.905357] usb-storage 1-2.2:1.0: USB Mass Storage device detected
[    1.905461] scsi14 : usb-storage 1-2.2:1.0
[    1.905537] usbcore: registered new interface driver usb-storage
[    2.012954] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 04:4b:80:80:80:03
[    2.012960] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[    2.048444] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.056559] ata6.00: ATAPI: Slimtype DVD A  DL8ATSH, 6P51, max UDMA/100
[    2.072558] ata6.00: configured for UDMA/100
[    2.077345] scsi 5:0:0:0: CD-ROM            Slimtype DVD A  DL8ATSH   6P51 PQ: 0 ANSI: 5
[    2.082436] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[    2.082438] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.082557] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    2.082630] sr 5:0:0:0: Attached scsi generic sg0 type 5
[    2.392398] ata8: SATA link down (SStatus 0 SControl 300)
[    2.392559] scsi 8:0:0:0: Direct-Access     ATA      Crucial_CT240M50 MU03 PQ: 0 ANSI: 5
[    2.392725] sd 8:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[    2.392731] sd 8:0:0:0: [sda] 4096-byte physical blocks
[    2.392745] sd 8:0:0:0: Attached scsi generic sg1 type 0
[    2.392858] sd 8:0:0:0: [sda] Write Protect is off
[    2.392861] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.392914] scsi 9:0:0:0: Direct-Access     ATA      ST750LX003-1AC15 SM12 PQ: 0 ANSI: 5
[    2.392925] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.393126] sd 9:0:0:0: Attached scsi generic sg2 type 0
[    2.393135] sd 9:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.393141] sd 9:0:0:0: [sdb] 4096-byte physical blocks
[    2.393201] sd 9:0:0:0: [sdb] Write Protect is off
[    2.393203] sd 9:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.393225] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.393436]  sda: sda1 sda2
[    2.393797]  sdb: sdb1
[    2.393805] sd 8:0:0:0: [sda] Attached SCSI disk
[    2.393999] sd 9:0:0:0: [sdb] Attached SCSI disk
[    2.768445] Switched to clocksource tsc
[    2.906223] scsi 14:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    2.906439] sd 14:0:0:0: Attached scsi generic sg3 type 0
[    2.907961] sd 14:0:0:0: [sdc] Attached SCSI removable disk
[    3.158247] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.479536] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.479546] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    3.540303] systemd-udevd[371]: starting version 204
[    3.607535] WARNING! power/level is deprecated; use power/control instead
[    3.660672] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[    3.660679] ACPI Warning: 0x0000000000001c40-0x0000000000001c7f SystemIO conflicts with Region \_SB_.PCI0.SM01 1 (20130517/utaddress-251)
[    3.660685] ACPI Warning: 0x0000000000001c40-0x0000000000001c7f SystemIO conflicts with Region \_SB_.PCI0.SM00 2 (20130517/utaddress-251)
[    3.660689] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.661503] parport_pc 00:08: reported by Plug and Play ACPI
[    3.661532] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[    3.665067] lp: driver loaded but no devices found
[    3.669376] vhba: module verification failed: signature and/or required key missing - tainting kernel
[    3.676561] systemd-udevd[403]: renamed network interface eth0 to rename2
[    3.681612] MCE: In-kernel MCE decoding enabled.
[    3.683602] nv_tco: NV TCO WatchDog Timer Driver v0.01
[    3.683791] nv_tco: Watchdog reboot not detected
[    3.683878] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[    3.685045] scsi15 : vhba
[    3.695288] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    3.701089] EDAC MC: Ver: 3.0.0
[    3.702054] ppdev: user-space parallel port driver
[    3.712096] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[    3.718181] AMD64 EDAC driver v3.4.0
[    3.720681] EDAC amd64: DRAM ECC disabled.
[    3.720694] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    3.720694]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    3.720694]  (Note that use of the override may cause unknown side effects.)
[    3.736172] microcode: CPU0: patch_level=0x01000065
[    3.761219] lp0: using parport0 (interrupt-driven).
[    3.780135] microcode: CPU0: new patch_level=0x01000083
[    3.780156] microcode: CPU1: patch_level=0x01000065
[    3.780165] microcode: CPU1: new patch_level=0x01000083
[    3.780175] microcode: CPU2: patch_level=0x01000065
[    3.780183] microcode: CPU2: new patch_level=0x01000083
[    3.780194] microcode: CPU3: patch_level=0x01000065
[    3.780203] microcode: CPU3: new patch_level=0x01000083
[    3.780333] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    3.819362] kvm: Nested Virtualization enabled
[    3.819367] kvm: Nested Paging enabled
[    3.839781] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
[    4.035673] type=1400 audit(1399045243.614:2): apparmor="STATUS" operation="profile_load" parent=416 profile="unconfined" name="/sbin/dhclient" pid=420 comm="apparmor_parser"
[    4.035792] type=1400 audit(1399045243.614:3): apparmor="STATUS" operation="profile_load" parent=416 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
[    4.035889] type=1400 audit(1399045243.614:4): apparmor="STATUS" operation="profile_load" parent=416 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=420 comm="apparmor_parser"
[    4.059105] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[    4.059114] hda_intel: msi for device 1043:81f6 set to 0
[    4.059147] snd_hda_intel 0000:00:06.1: setting latency timer to 64
[    4.059151] hda-intel 0000:00:06.1: Disabling 64bit DMA
[    4.063532] hda-intel 0000:00:06.1: Enable delay in RIRB handling
[    4.071362] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory
[    4.412740] init: failsafe main process (686) killed by TERM signal
[    4.653120] init: avahi-cups-reload main process (753) terminated with status 1
[    4.728699] init: samba-ad-dc main process (807) terminated with status 1
[    4.773826] forcedeth 0000:00:08.0: irq 54 for MSI/MSI-X
[    4.773862] forcedeth 0000:00:08.0 rename2: MSI enabled
[    4.774078] forcedeth 0000:00:08.0 rename2: no link during initialization
[    4.774528] IPv6: ADDRCONF(NETDEV_UP): rename2: link is not ready
[    4.775202] IPv6: ADDRCONF(NETDEV_UP): rename2: link is not ready
[    4.780500] forcedeth 0000:00:09.0: irq 55 for MSI/MSI-X
[    4.780534] forcedeth 0000:00:09.0 eth1: MSI enabled
[    4.855195] type=1400 audit(1399045244.434:5): apparmor="STATUS" operation="profile_load" parent=651 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=715 comm="apparmor_parser"
[    4.855623] type=1400 audit(1399045244.434:6): apparmor="STATUS" operation="profile_load" parent=651 profile="unconfined" name="/usr/sbin/cupsd" pid=715 comm="apparmor_parser"
[    5.079240] type=1400 audit(1399045244.658:7): apparmor="STATUS" operation="profile_load" parent=863 profile="unconfined" name="/usr/sbin/cups-browsed" pid=875 comm="apparmor_parser"
[    5.083328] type=1400 audit(1399045244.662:8): apparmor="STATUS" operation="profile_replace" parent=863 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=902 comm="apparmor_parser"
[    5.083340] type=1400 audit(1399045244.662:9): apparmor="STATUS" operation="profile_replace" parent=863 profile="unconfined" name="/usr/sbin/cupsd" pid=902 comm="apparmor_parser"
[    5.083798] type=1400 audit(1399045244.662:10): apparmor="STATUS" operation="profile_replace" parent=863 profile="unconfined" name="/usr/sbin/cupsd" pid=902 comm="apparmor_parser"
[    5.288875] hda-intel 0000:09:00.1: Handle VGA-switcheroo audio client
[    5.288880] hda-intel 0000:09:00.1: Using LPIB position fix
[    5.288882] hda-intel 0000:09:00.1: Force to non-snoop mode
[    5.288932] snd_hda_intel 0000:09:00.1: irq 56 for MSI/MSI-X
[    5.296198] hda-intel 0000:09:00.1: Enable sync_write for stable communication
[    5.312948] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:0f.0/0000:09:00.1/sound/card1/input4
[    5.313111] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0f.0/0000:09:00.1/sound/card1/input5
[    5.313189] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0f.0/0000:09:00.1/sound/card1/input6
[    5.313257] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0f.0/0000:09:00.1/sound/card1/input7
[    5.313351] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0f.0/0000:09:00.1/sound/card1/input8
[    5.313417] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0f.0/0000:09:00.1/sound/card1/input9
[    6.062702] audit_printk_skb: 30 callbacks suppressed
[    6.062707] type=1400 audit(1399045245.642:21): apparmor="STATUS" operation="profile_load" parent=863 profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=873 comm="apparmor_parser"
[    6.063257] type=1400 audit(1399045245.642:22): apparmor="STATUS" operation="profile_load" parent=863 profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=873 comm="apparmor_parser"
[    6.063601] type=1400 audit(1399045245.642:23): apparmor="STATUS" operation="profile_load" parent=863 profile="unconfined" name="pxgsettings" pid=873 comm="apparmor_parser"
[    6.063892] type=1400 audit(1399045245.642:24): apparmor="STATUS" operation="profile_load" parent=863 profile="unconfined" name="sanitized_helper" pid=873 comm="apparmor_parser"
[    6.064056] type=1400 audit(1399045245.642:25): apparmor="STATUS" operation="profile_load" parent=863 profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=873 comm="apparmor_parser"
[    6.212239] init: alsa-restore main process (1023) terminated with status 99
[    6.457784] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    6.477541] init: udev-fallback-graphics main process (1220) terminated with status 1
[    6.481005] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.716947] init: kdm main process (1346) killed by TERM signal
[    7.083344] HDMI: ELD buf size is 0, force 128
[    7.083363] HDMI: invalid ELD data byte 0
[    7.083398] HDMI: ELD buf size is 0, force 128
[    7.083411] HDMI: invalid ELD data byte 0
[    7.206515] Netfilter messages via NETLINK v0.30.
[    7.266732] init: plymouth-upstart-bridge main process ended, respawning
[    7.276265] init: plymouth-upstart-bridge main process (1687) terminated with status 1
[    7.276281] init: plymouth-upstart-bridge main process ended, respawning
[    7.380010] HDMI: ELD buf size is 0, force 128
[    7.380028] HDMI: invalid ELD data byte 0
[    7.679981] HDMI: ELD buf size is 0, force 128
[    7.680020] HDMI: invalid ELD data byte 0
[    7.979971] HDMI: ELD buf size is 0, force 128
[    7.979988] HDMI: invalid ELD data byte 0
[    8.279948] HDMI: ELD buf size is 0, force 128
[    8.279965] HDMI: invalid ELD data byte 0
[    8.579921] HDMI: ELD buf size is 0, force 128
[    8.579940] HDMI: invalid ELD data byte 0
[    8.879895] HDMI: ELD buf size is 0, force 128
[    8.879914] HDMI: invalid ELD data byte 0
[    9.179868] HDMI: ELD buf size is 0, force 128
[    9.179887] HDMI: invalid ELD data byte 0
[    9.484110] HDMI: ELD buf size is 0, force 128
[    9.484127] HDMI: invalid ELD data byte 0
[   10.795792] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   11.046326] HDMI: ELD buf size is 0, force 128
[   11.046344] HDMI: invalid ELD data byte 0
[   11.046377] HDMI: ELD buf size is 0, force 128
[   11.046390] HDMI: invalid ELD data byte 0
[   11.343692] HDMI: ELD buf size is 0, force 128
[   11.343711] HDMI: invalid ELD data byte 0
[   11.643670] HDMI: ELD buf size is 0, force 128
[   11.643688] HDMI: invalid ELD data byte 0
[   11.943651] HDMI: ELD buf size is 0, force 128
[   11.943667] HDMI: invalid ELD data byte 0
[   12.243625] HDMI: ELD buf size is 0, force 128
[   12.243644] HDMI: invalid ELD data byte 0
[   12.543603] HDMI: ELD buf size is 0, force 128
[   12.543621] HDMI: invalid ELD data byte 0
[   12.843586] HDMI: ELD buf size is 0, force 128
[   12.843604] HDMI: invalid ELD data byte 0
[   13.143556] HDMI: ELD buf size is 0, force 128
[   13.143572] HDMI: invalid ELD data byte 0
[   13.443534] HDMI: ELD buf size is 0, force 128
[   13.443551] HDMI: invalid ELD data byte 0
[   30.484190] [sched_delayed] sched: RT throttling activated
[   34.992201] scsi 15:0:0:0: CD-ROM            CDEmu    Virt. CD/DVD-ROM 1.10 PQ: 0 ANSI: 0
[   34.992347] sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[   34.992460] sr 15:0:0:0: Attached scsi CD-ROM sr1
[   34.992511] sr 15:0:0:0: Attached scsi generic sg4 type 5
[   35.713797] systemd-hostnamed[3071]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!

En 7.26, on peut voir: init: plymouth-upstart-bridge main process ended, respawning
Par contre, je ne peux pas activer le driver fglrx, je suis en basse résolution.

moko138 · Le 02/05/2014, à 18:27

Il y a quand même

[    7.276265] init: plymouth-upstart-bridge main process (1687) terminated with status 1

Tu nous diras si ça tourne nickel ou pas dans ces conditions.

Gaara · Le 03/05/2014, à 12:12

J'essaie de voir si le bug se retrouve avec le kernel 3.15
J'ai suivi ce tuto et ça à l'air de fonctionner, sauf CdEmu (lecteur cd/dvd virtuel) qui plante.
A voir avec plusieurs reboot...

Dernière modification par Gaara (Le 03/05/2014, à 12:14)

nam1962 · Le 07/05/2014, à 09:58

Tiens, en me gourant j'ai fait un fdisk -l il finit bizarrement :

:~$ sudo fdisk -l

Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.


Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 têtes, 63 secteurs/piste, 91201 cylindres, total 1465149168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Identifiant de disque : 0xbea31e36

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1               1  1465149167   732574583+  ee  GPT
La partition 1 ne commence pas sur une frontière de cylindre physique.

La dernière ligne est elle une piste, ou simplement le fait que fdisk soit obsolète ?

Pour parted :

:~$ sudo parted -l
Modèle: ATA Hitachi HTS54757 (scsi)
Disque /dev/sda : 750GB
Taille des secteurs (logiques/physiques): 512B/4096B
Table de partitions : gpt

Numéro  Début   Fin    Taille  Système de fichiers  Nom  Fanions
 1      1049kB  256MB  255MB   fat32                     démarrage
 2      256MB   150GB  150GB   ext4                      msftdata
 3      150GB   168GB  18,0GB  linux-swap(v1)
 4      168GB   750GB  582GB   ext4                      msftdata

[edit]Autre truc remarqué : quand je passe en mode recovery, j'ai à tous coups ces deux lignes :

* Starting load fallback graphics devices        [fail]
* Starting load fallback graphics devices        [OK]

Serait ce un problème lightdm ?
(J'ai une hybride mais n'ayant jamais pu activer la radeon, je tourne sur la intel avec le driver libre)

Dernière modification par nam1962 (Le 07/05/2014, à 11:35)

moko138 · Le 07/05/2014, à 14:55

Gaara a écrit :

J'essaie de voir si le bug se retrouve avec le kernel 3.15
J'ai suivi ce tuto et ça à l'air de fonctionner, sauf CdEmu (lecteur cd/dvd virtuel) qui plante.
A voir avec plusieurs reboot...

Ah ah ! Et donc, 4 jours après ?

moko138 · Le 07/05/2014, à 15:06

Nam tu as deux pbs. A mon avis distincts.

nam1962 a écrit :

Tiens, en me gourant j'ai fait un fdisk -l il finit bizarrement :
:~$ sudo fdisk -l
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted.
(...)
La partition 1 ne commence pas sur une frontière de cylindre physique.
La dernière ligne est elle une piste, ou simplement le fait que fdisk soit obsolète ?

C'est la première ligne le pb. Ignores-tu qu'il existe un utilitaire, justement, pour effacer les traces de gpt dans les disques non gpt et remédier aux pbs que ces traces occasionnent parfois ? malbo en avait parlé. EDIT : [la table est bien de type gpt].

[edit]Autre truc remarqué : quand je passe en mode recovery, j'ai à tous coups ces deux lignes :
* Starting load fallback graphics devices        [fail]
* Starting load fallback graphics devices        [OK]
Serait ce un problème lightdm ?
(J'ai une hybride mais n'ayant jamais pu activer la radeon, je tourne sur la intel avec le driver libre)

Pour moi, ton 2nd pb est un pb graphique.

Dernière modification par moko138 (Le 23/05/2014, à 08:50)

nam1962 · Le 07/05/2014, à 15:39

moko138 a écrit :

Gaara a écrit :
J'essaie de voir si le bug se retrouve avec le kernel 3.15
J'ai suivi ce tuto et ça à l'air de fonctionner, sauf CdEmu (lecteur cd/dvd virtuel) qui plante.
A voir avec plusieurs reboot...
Ah ah ! Et donc, 4 jours après ?

Complètement foiré chez moi. (pourtant j'avais pris la RC4 utopic)
Suis sagement revenu au 3.14.0-24

nam1962 · Le 23/05/2014, à 08:34

Bon, ca plante moins souvent au démarrage, mais c'est lent dis donc, pas loin d'une minute :

[    0.195120] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.195135] ACPI: (supports S0 S3 S4 S5)
[    0.195136] ACPI: Using IOAPIC for interrupt routing
[    0.195162] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.198408] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.422429] ACPI: Power Resource [FN00] (off)
[    0.422544] ACPI: Power Resource [FN01] (off)
[    0.422652] ACPI: Power Resource [FN02] (off)
[    0.422757] ACPI: Power Resource [FN03] (off)
[    0.422861] ACPI: Power Resource [FN04] (off)
[    0.423511] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.423516] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.423633] \_SB_.PCI0:_OSC invalid UUID
[    0.423634] _OSC request data:1 1f 0 
[    0.423638] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.424107] PCI host bridge to bus 0000:00
[    0.424110] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.424112] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.424114] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.424116] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.424118] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.424120] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.424121] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.424123] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.424125] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.424126] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.424128] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.424130] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.424131] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.424133] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.424135] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.424136] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.424138] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.424140] pci_bus 0000:00: root bus resource [mem 0x3fa00000-0xfeafffff]
[    0.424148] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.424235] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.424268] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.424311] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.424344] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.424355] pci 0000:00:02.0: reg 0x10: [mem 0x61000000-0x613fffff 64bit]
[    0.424362] pci 0000:00:02.0: reg 0x18: [mem 0x50000000-0x5fffffff 64bit pref]
[    0.424367] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.424467] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.424492] pci 0000:00:14.0: reg 0x10: [mem 0x61700000-0x6170ffff 64bit]
[    0.424566] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.424633] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.424667] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.424693] pci 0000:00:16.0: reg 0x10: [mem 0x61714000-0x6171400f 64bit]
[    0.424773] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.424857] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.424880] pci 0000:00:1a.0: reg 0x10: [mem 0x61719000-0x617193ff]
[    0.424974] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.425033] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.425068] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.425084] pci 0000:00:1b.0: reg 0x10: [mem 0x61710000-0x61713fff 64bit]
[    0.425155] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.425203] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.425233] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.425314] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.425365] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.425395] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.425476] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.425532] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.425571] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.425594] pci 0000:00:1d.0: reg 0x10: [mem 0x61718000-0x617183ff]
[    0.425687] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.425760] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.425795] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.425970] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[    0.425991] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.425999] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.426008] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.426016] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.426025] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.426034] pci 0000:00:1f.2: reg 0x24: [mem 0x61717000-0x617177ff]
[    0.426082] pci 0000:00:1f.2: PME# supported from D3hot
[    0.426152] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.426169] pci 0000:00:1f.3: reg 0x10: [mem 0x61715000-0x617150ff 64bit]
[    0.426191] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.426332] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[    0.426343] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x4fffffff 64bit pref]
[    0.426352] pci 0000:01:00.0: reg 0x18: [mem 0x60000000-0x6001ffff 64bit]
[    0.426358] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.426367] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.426397] pci 0000:01:00.0: supports D1 D2
[    0.426463] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.433525] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.433534] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.433542] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x60ffffff]
[    0.433552] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.433686] pci 0000:07:00.0: [10ec:5289] type 00 class 0xff0000
[    0.433708] pci 0000:07:00.0: reg 0x10: [mem 0x61600000-0x6160ffff]
[    0.433867] pci 0000:07:00.0: supports D1 D2
[    0.433869] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.433947] pci 0000:07:00.2: [10ec:8168] type 00 class 0x020000
[    0.433969] pci 0000:07:00.2: reg 0x10: [io  0x2000-0x20ff]
[    0.434005] pci 0000:07:00.2: reg 0x18: [mem 0x61404000-0x61404fff 64bit pref]
[    0.434028] pci 0000:07:00.2: reg 0x20: [mem 0x61400000-0x61403fff 64bit pref]
[    0.434122] pci 0000:07:00.2: supports D1 D2
[    0.434124] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.434175] pci 0000:07:00.2: System wakeup disabled by ACPI
[    0.441558] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.441568] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.441578] pci 0000:00:1c.0:   bridge window [mem 0x61600000-0x616fffff]
[    0.441593] pci 0000:00:1c.0:   bridge window [mem 0x61400000-0x614fffff 64bit pref]
[    0.444986] pci 0000:08:00.0: [1814:3290] type 00 class 0x028000
[    0.445008] pci 0000:08:00.0: reg 0x10: [mem 0x61510000-0x6151ffff]
[    0.445152] pci 0000:08:00.0: PME# supported from D0 D3hot
[    0.445183] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.448501] pci 0000:08:00.1: [1814:3298] type 00 class 0x0d1100
[    0.448522] pci 0000:08:00.1: reg 0x10: [mem 0x61500000-0x6150ffff]
[    0.448665] pci 0000:08:00.1: supports D1
[    0.448666] pci 0000:08:00.1: PME# supported from D0 D1 D3hot
[    0.462186] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.462192] pci 0000:00:1c.1:   bridge window [mem 0x61500000-0x615fffff]
[    0.535581] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.535634] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.535688] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.535738] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.535788] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.535838] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.535888] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.535938] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536365] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.536372] ACPI: \_SB_.PCI0: notify handler is installed
[    0.536439] Found 1 acpi root devices
[    0.536477] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.536570] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.536575] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.536577] vgaarb: loaded
[    0.536578] vgaarb: bridge control possible 0000:01:00.0
[    0.536579] vgaarb: no bridge control possible 0000:00:02.0
[    0.536724] SCSI subsystem initialized
[    0.536775] libata version 3.00 loaded.
[    0.536791] ACPI: bus type USB registered
[    0.536805] usbcore: registered new interface driver usbfs
[    0.536812] usbcore: registered new interface driver hub
[    0.536833] usbcore: registered new device driver usb
[    0.536933] PCI: Using ACPI for IRQ routing
[    0.543571] PCI: pci_cache_line_size set to 64 bytes
[    0.543632] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.543634] e820: reserve RAM buffer [mem 0x3a4bf000-0x3bffffff]
[    0.543636] e820: reserve RAM buffer [mem 0x3b000000-0x3bffffff]
[    0.543637] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[    0.543713] NetLabel: Initializing
[    0.543715] NetLabel:  domain hash size = 128
[    0.543715] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.543728] NetLabel:  unlabeled traffic allowed by default
[    0.543780] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.543786] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.545817] Switched to clocksource hpet
[    0.550349] AppArmor: AppArmor Filesystem Enabled
[    0.550373] pnp: PnP ACPI init
[    0.550386] ACPI: bus type PNP registered
[    0.550419] pnp 00:00: [dma 4]
[    0.550437] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.550457] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.550554] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.550584] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.550626] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.550628] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.550630] system 00:04: [io  0xffff] has been reserved
[    0.550633] system 00:04: [io  0xffff] has been reserved
[    0.550636] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.550638] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.550640] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.550642] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.550644] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.550667] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.550713] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.550716] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.550748] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.550775] pnp 00:08: Plug and Play ACPI device, IDs SYN1e76 SYN1e00 SYN0002 PNP0f13 (active)
[    0.622056] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[    0.622174] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.622176] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.622178] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.622180] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.622182] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.622184] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.622186] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.622188] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[    0.622190] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[    0.622192] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.622194] system 00:0a: [mem 0x3fa00000-0x3fa00fff] has been reserved
[    0.622197] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.622542] pnp 00:0b: disabling [mem 0x40000000-0x401fffff] because it overlaps 0000:00:01.0 BAR 15 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.622548] pnp 00:0b: disabling [mem 0x40000000-0x401fffff disabled] because it overlaps 0000:01:00.0 BAR 0 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.622573] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[    0.622576] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.622662] pnp: PnP ACPI: found 12 devices
[    0.622663] ACPI: bus type PNP unregistered
[    0.628818] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.628846] pci 0000:01:00.0: BAR 6: assigned [mem 0x60020000-0x6003ffff pref]
[    0.628849] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.628851] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.628854] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x60ffffff]
[    0.628857] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.628861] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.628864] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.628870] pci 0000:00:1c.0:   bridge window [mem 0x61600000-0x616fffff]
[    0.628874] pci 0000:00:1c.0:   bridge window [mem 0x61400000-0x614fffff 64bit pref]
[    0.628881] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.628886] pci 0000:00:1c.1:   bridge window [mem 0x61500000-0x615fffff]
[    0.628896] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.628897] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.628899] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.628901] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.628903] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.628904] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.628906] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.628908] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.628909] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.628911] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.628913] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.628914] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.628916] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.628918] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.628919] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.628921] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.628923] pci_bus 0000:00: resource 20 [mem 0x3fa00000-0xfeafffff]
[    0.628925] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.628926] pci_bus 0000:01: resource 1 [mem 0x60000000-0x60ffffff]
[    0.628928] pci_bus 0000:01: resource 2 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.628930] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.628932] pci_bus 0000:07: resource 1 [mem 0x61600000-0x616fffff]
[    0.628934] pci_bus 0000:07: resource 2 [mem 0x61400000-0x614fffff 64bit pref]
[    0.628935] pci_bus 0000:08: resource 1 [mem 0x61500000-0x615fffff]
[    0.628963] NET: Registered protocol family 2
[    0.629130] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.629289] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.629420] TCP: Hash tables configured (established 65536 bind 65536)
[    0.629442] TCP: reno registered
[    0.629454] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.629485] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.629560] NET: Registered protocol family 1
[    0.629573] pci 0000:00:02.0: Boot video device
[    1.014401] PCI: CLS 64 bytes, default 64
[    1.014463] Trying to unpack rootfs image as initramfs...
[    1.328362] Freeing initrd memory: 19652K (ffff88003598e000 - ffff880036cbf000)
[    1.328368] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.328370] software IO TLB [mem 0x2cb7f000-0x30b7f000] (64MB) mapped at [ffff88002cb7f000-ffff880030b7efff]
[    1.328442] Simple Boot Flag at 0x44 set to 0x1
[    1.328617] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    1.328622] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    1.328629] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    1.328637] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    1.328687] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.328689] Scanning for low memory corruption every 60 seconds
[    1.328938] Initialise system trusted keyring
[    1.328983] audit: initializing netlink socket (disabled)
[    1.328993] type=2000 audit(1400826637.300:1): initialized
[    1.354890] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.356019] VFS: Disk quotas dquot_6.5.2
[    1.356056] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.356423] fuse init (API version 7.22)
[    1.356483] msgmni has been set to 11724
[    1.356527] Key type big_key registered
[    1.356876] Key type asymmetric registered
[    1.356879] Asymmetric key parser 'x509' registered
[    1.356905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.356938] io scheduler noop registered
[    1.356940] io scheduler deadline registered (default)
[    1.356960] io scheduler cfq registered
[    1.357021] pcieport 0000:00:01.0: device [8086:0101] has invalid IRQ; check vendor BIOS
[    1.357137] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.357174] pcieport 0000:00:1c.0: device [8086:1e10] has invalid IRQ; check vendor BIOS
[    1.357290] pcieport 0000:00:1c.1: device [8086:1e12] has invalid IRQ; check vendor BIOS
[    1.357418] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.357430] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.357464] efifb: probing for efifb
[    1.357834] efifb: framebuffer at 0x50000000, mapped to 0xffffc90010e80000, using 4160k, total 4160k
[    1.357835] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.357836] efifb: scrolling: redraw
[    1.357838] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.360510] Console: switching to colour frame buffer device 170x48
[    1.363013] fb0: EFI VGA frame buffer device
[    1.363024] intel_idle: MWAIT substates: 0x21120
[    1.363025] intel_idle: v0.4 model 0x2A
[    1.363026] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.363116] ipmi message handler version 39.2
[    1.363197] ACPI: AC Adapter [ACAD] (on-line)
[    1.363275] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
[    1.363279] ACPI: Power Button [PWRB]
[    1.363319] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.363566] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    1.363574] pci 0000:00:00.0: no hotplug settings from platform
[    1.363576] pci 0000:00:00.0: using default PCI settings
[    1.363581] pcieport 0000:00:01.0: no hotplug settings from platform
[    1.363587] pci 0000:01:00.0: no hotplug settings from platform
[    1.363589] pci 0000:00:02.0: no hotplug settings from platform
[    1.363591] pci 0000:00:02.0: using default PCI settings
[    1.363595] pci 0000:00:14.0: no hotplug settings from platform
[    1.363597] pci 0000:00:14.0: using default PCI settings
[    1.363604] pci 0000:00:16.0: no hotplug settings from platform
[    1.363606] pci 0000:00:16.0: using default PCI settings
[    1.363613] pci 0000:00:1a.0: no hotplug settings from platform
[    1.363615] pci 0000:00:1a.0: using default PCI settings
[    1.363622] pci 0000:00:1b.0: no hotplug settings from platform
[    1.363625] pcieport 0000:00:1c.0: no hotplug settings from platform
[    1.363636] pci 0000:07:00.0: no hotplug settings from platform
[    1.363646] pci 0000:07:00.2: no hotplug settings from platform
[    1.363648] pcieport 0000:00:1c.1: no hotplug settings from platform
[    1.363659] pci 0000:08:00.0: no hotplug settings from platform
[    1.363669] pci 0000:08:00.1: no hotplug settings from platform
[    1.363671] pci 0000:00:1d.0: no hotplug settings from platform
[    1.363673] pci 0000:00:1d.0: using default PCI settings
[    1.363680] pci 0000:00:1f.0: no hotplug settings from platform
[    1.363682] pci 0000:00:1f.0: using default PCI settings
[    1.363690] pci 0000:00:1f.2: no hotplug settings from platform
[    1.363692] pci 0000:00:1f.2: using default PCI settings
[    1.363699] pci 0000:00:1f.3: no hotplug settings from platform
[    1.363700] pci 0000:00:1f.3: using default PCI settings
[    1.363726] ACPI: Lid Switch [LID0]
[    1.363758] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.363760] ACPI: Power Button [PWRF]
[    1.363806] ACPI: Fan [FAN0] (off)
[    1.363827] ACPI: Fan [FAN1] (off)
[    1.363850] ACPI: Fan [FAN2] (off)
[    1.363871] ACPI: Fan [FAN3] (off)
[    1.363892] ACPI: Fan [FAN4] (off)
[    1.364394] thermal LNXTHERM:00: registered as thermal_zone0
[    1.364396] ACPI: Thermal Zone [TZ00] (37 C)
[    1.364630] thermal LNXTHERM:01: registered as thermal_zone1
[    1.364632] ACPI: Thermal Zone [TZ01] (37 C)
[    1.364684] thermal LNXTHERM:02: registered as thermal_zone2
[    1.364685] ACPI: Thermal Zone [TZ02] (28 C)
[    1.364717] GHES: HEST is not enabled!
[    1.364810] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.434587] ACPI: Battery Slot [BAT1] (battery absent)
[    1.434681] Linux agpgart interface v0.103
[    1.436044] brd: module loaded
[    1.436575] loop: module loaded
[    1.436861] libphy: Fixed MDIO Bus: probed
[    1.436931] tun: Universal TUN/TAP device driver, 1.6
[    1.436932] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.436974] PPP generic driver version 2.4.2
[    1.437012] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.437015] ehci-pci: EHCI PCI platform driver
[    1.437132] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.437139] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.437153] ehci-pci 0000:00:1a.0: debug port 2
[    1.441054] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.441071] ehci-pci 0000:00:1a.0: irq 16, io mem 0x61719000
[    1.450602] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.450643] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.450645] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.450647] usb usb1: Product: EHCI Host Controller
[    1.450649] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    1.450651] usb usb1: SerialNumber: 0000:00:1a.0
[    1.450744] hub 1-0:1.0: USB hub found
[    1.450753] hub 1-0:1.0: 2 ports detected
[    1.450928] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.450932] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.450944] ehci-pci 0000:00:1d.0: debug port 2
[    1.454857] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.454870] ehci-pci 0000:00:1d.0: irq 20, io mem 0x61718000
[    1.466615] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.466651] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.466653] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.466655] usb usb2: Product: EHCI Host Controller
[    1.466656] usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    1.466658] usb usb2: SerialNumber: 0000:00:1d.0
[    1.466780] hub 2-0:1.0: USB hub found
[    1.466786] hub 2-0:1.0: 2 ports detected
[    1.466861] ehci-platform: EHCI generic platform driver
[    1.466869] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.466870] ohci-pci: OHCI PCI platform driver
[    1.466877] ohci-platform: OHCI generic platform driver
[    1.466882] uhci_hcd: USB Universal Host Controller Interface driver
[    1.466991] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.466995] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.467093] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.467117] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    1.467179] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.467181] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.467183] usb usb3: Product: xHCI Host Controller
[    1.467185] usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    1.467186] usb usb3: SerialNumber: 0000:00:14.0
[    1.467302] hub 3-0:1.0: USB hub found
[    1.467312] hub 3-0:1.0: 4 ports detected
[    1.467608] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.467611] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.467650] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.467652] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.467654] usb usb4: Product: xHCI Host Controller
[    1.467655] usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    1.467657] usb usb4: SerialNumber: 0000:00:14.0
[    1.467774] hub 4-0:1.0: USB hub found
[    1.467784] hub 4-0:1.0: 4 ports detected
[    1.474784] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.510261] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.510265] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.510535] mousedev: PS/2 mouse device common for all mice
[    1.513195] rtc_cmos 00:05: RTC can wake from S4
[    1.513443] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.513477] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.513529] device-mapper: uevent: version 1.0.3
[    1.513704] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.513712] ledtrig-cpu: registered to indicate activity on CPUs
[    1.513713] EFI Variables Facility v0.08 2004-May-17
[    1.559724] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.766918] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.006785] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.006788] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.029363] hub 1-1:1.0: USB hub found
[    2.051879] hub 1-1:1.0: 6 ports detected
[    2.163498] TCP: cubic registered
[    2.163574] NET: Registered protocol family 10
[    2.163722] NET: Registered protocol family 17
[    2.163731] Key type dns_resolver registered
[    2.163966] Loading compiled-in X.509 certificates
[    2.164892] Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
[    2.164903] registered taskstats version 1
[    2.167823] Key type trusted registered
[    2.169864] Key type encrypted registered
[    2.171830] AppArmor: AppArmor sha1 policy hashing enabled
[    2.171833] IMA: No TPM chip found, activating TPM-bypass!
[    2.172172] regulator-dummy: disabling
[    2.172252]   Magic number: 14:832:519
[    2.172284] acpi LNXPOWER:03: hash matches
[    2.172359] rtc_cmos 00:05: setting system clock to 2014-05-23 06:30:38 UTC (1400826638)
[    2.172999] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.173001] EDD information not available.
[    2.173038] PM: Hibernation image not present or could not be loaded.
[    2.174449] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[    2.174451] Write protecting the kernel read-only data: 12288k
[    2.176607] Freeing unused kernel memory: 844K (ffff88000272d000 - ffff880002800000)
[    2.178344] Freeing unused kernel memory: 708K (ffff880002b4f000 - ffff880002c00000)
[    2.190599] systemd-udevd[123]: starting version 204
[    2.218893] rtsx_pci 0000:07:00.0: irq 42 for MSI/MSI-X
[    2.218913] rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[    2.223840] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.223854] r8169 0000:07:00.2: can't disable ASPM; OS doesn't have ASPM control
[    2.224608] r8169 0000:07:00.2: irq 43 for MSI/MSI-X
[    2.226657] r8169 0000:07:00.2 eth0: RTL8411 at 0xffffc90010e7a000, 84:34:97:14:24:7b, XID 08800800 IRQ 43
[    2.226661] r8169 0000:07:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.238866] ahci 0000:00:1f.2: version 3.0
[    2.239059] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    2.252922] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode
[    2.252926] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    2.268021] scsi0 : ahci
[    2.268117] scsi1 : ahci
[    2.268225] scsi2 : ahci
[    2.268313] scsi3 : ahci
[    2.268403] scsi4 : ahci
[    2.268490] scsi5 : ahci
[    2.268539] ata1: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717100 irq 44
[    2.268544] ata2: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717180 irq 44
[    2.268548] ata3: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717200 irq 44
[    2.268550] ata4: DUMMY
[    2.268552] ata5: DUMMY
[    2.268553] ata6: DUMMY
[    2.275319] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.327435] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[    2.407856] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.407861] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.408085] hub 2-1:1.0: USB hub found
[    2.408250] hub 2-1:1.0: 8 ports detected
[    2.580045] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    2.587601] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.590332] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.590358] ata3.00: ATAPI: hp      DVD RAM UJ8C2, 1.00, max UDMA/133
[    2.591857] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[    2.591866] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.592102] ata3.00: configured for UDMA/133
[    2.593499] ata1.00: configured for UDMA/100
[    2.593804] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[    2.593963] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.593966] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.593995] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.594073] sd 0:0:0:0: [sda] Write Protect is off
[    2.594077] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.594121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.595589] ata2: SATA link down (SStatus 0 SControl 300)
[    2.599640] usb 3-2: New USB device found, idVendor=093a, idProduct=2510
[    2.599643] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.599645] usb 3-2: Product: USB Optical Mouse
[    2.599646] usb 3-2: Manufacturer: PixArt
[    2.599749] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.604620] hidraw: raw HID events driver (C) Jiri Kosina
[    2.605066] scsi 2:0:0:0: CD-ROM            hp       DVD RAM UJ8C2    1.00 PQ: 0 ANSI: 5
[    2.607121] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.607124] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.607238] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.607348] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.608169] usbcore: registered new interface driver usbhid
[    2.608172] usbhid: USB HID core driver
[    2.609669] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input6
[    2.609799] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[    2.659957]  sda: sda1 sda2 sda3 sda4
[    2.660557] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.711710] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[    2.731255] usb 3-4: New USB device found, idVendor=138a, idProduct=0018
[    2.731265] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.731271] usb 3-4: SerialNumber: 47163a54f0d0
[    2.803897] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.956477] usb 1-1.1: New USB device found, idVendor=064e, idProduct=c33c
[    2.956481] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.956483] usb 1-1.1: Product: HP Truevision HD
[    2.956485] usb 1-1.1: Manufacturer: SuYin
[    2.956487] usb 1-1.1: SerialNumber: HF1019-P62A-OV03-REV0201
[    3.328535] Switched to clocksource tsc
[    3.350391] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.711400] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00, board id: 2054, fw id: 1196324
[    3.846105] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    4.124070] random: nonblocking pool is initialized
[    7.325743] Adding 17577980k swap on /dev/sda3.  Priority:-1 extents:1 across:17577980k FS
[    8.391269] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    8.822462] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.300486] systemd-udevd[358]: starting version 204
[    9.782427] lp: driver loaded but no devices found
[    9.882214] ppdev: user-space parallel port driver
[   10.659490] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   12.069285] wmi: Mapper loaded
[   12.147037] hp_accel: laptop model unknown, using default axes configuration
[   12.147270] lis3lv02d: unknown sensor type 0x0
[   12.147304] hp_accel: probe of HPQ0004:00 failed with error -22
[   12.160145] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   12.160154] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.160159] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
[   12.160164] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[   12.160169] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251)
[   12.160173] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.160175] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
[   12.160180] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[   12.160184] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251)
[   12.160189] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.160191] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.293561] cfg80211: Calling CRDA to update world regulatory domain
[   12.338623] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[   12.431324] [drm] Initialized drm 1.1.0 20060810
[   13.130088] [drm] radeon kernel modesetting enabled.
[   13.130104] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[   13.130141] checking generic (50000000 410000) vs hw (40000000 10000000)
[   13.130157] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[   13.130355] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x103C:0x18A5).
[   13.130386] [drm] register mmio base: 0x60000000
[   13.130387] [drm] register mmio size: 131072
[   13.249098] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[   13.257378] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[   13.335386] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.643291] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.697515] input: HP WMI hotkeys as /devices/virtual/input/input7
[   13.764355] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   13.902223] type=1400 audit(1400826650.217:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=426 comm="apparmor_parser"
[   13.902230] type=1400 audit(1400826650.217:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=426 comm="apparmor_parser"
[   13.902234] type=1400 audit(1400826650.217:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=426 comm="apparmor_parser"
[   13.902412] type=1400 audit(1400826650.217:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=434 comm="apparmor_parser"
[   13.902421] type=1400 audit(1400826650.217:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=434 comm="apparmor_parser"
[   13.902427] type=1400 audit(1400826650.217:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=434 comm="apparmor_parser"
[   13.902436] type=1400 audit(1400826650.217:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=572 comm="apparmor_parser"
[   13.902443] type=1400 audit(1400826650.217:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=572 comm="apparmor_parser"
[   13.902449] type=1400 audit(1400826650.217:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=572 comm="apparmor_parser"
[   13.902675] type=1400 audit(1400826650.217:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=426 comm="apparmor_parser"
[   14.000499] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.090121] cfg80211: World regulatory domain updated:
[   14.090124] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.090126] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.090128] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.090130] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.090131] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.090133] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.185021] Linux video capture interface: v2.00
[   14.374020] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c33c)
[   14.382748] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8
[   14.382868] usbcore: registered new interface driver uvcvideo
[   14.382869] USB Video Class driver (1.1.1)
[   14.642934] ATOM BIOS: HP/Compal
[   14.642987] [drm] GPU not posted. posting now...
[   14.645808] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[   14.645823] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[   14.645826] [drm] Detected VRAM RAM=2048M, BAR=256M
[   14.645828] [drm] RAM width 128bits DDR
[   14.645974] [TTM] Zone  kernel: Available graphics memory: 3002892 kiB
[   14.645976] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   14.645978] [TTM] Initializing pool allocator
[   14.645982] [TTM] Initializing DMA pool allocator
[   14.646004] [drm] radeon: 2048M of VRAM memory ready
[   14.646006] [drm] radeon: 1024M of GTT memory ready.
[   14.646021] [drm] Loading TURKS Microcode
[   14.929261] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   14.930426] [drm] PCIE gen 2 link speeds already enabled
[   14.932926] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[   14.933037] radeon 0000:01:00.0: WB enabled
[   14.933041] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023369bc00
[   14.933043] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023369bc0c
[   14.933593] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90011ab2118
[   14.933596] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.933597] [drm] Driver supports precise vblank timestamp query.
[   14.933615] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[   14.933627] radeon 0000:01:00.0: radeon: using MSI.
[   14.933659] [drm] radeon: irq initialized.
[   14.950084] [drm] ring test on 0 succeeded in 1 usecs
[   14.950144] [drm] ring test on 3 succeeded in 1 usecs
[   15.145858] [drm] ring test on 5 succeeded in 1 usecs
[   15.145865] [drm] UVD initialized successfully.
[   15.146071] [drm] Enabling audio 0 support
[   15.146121] [drm] ib test on ring 0 succeeded in 0 usecs
[   15.146171] [drm] ib test on ring 3 succeeded in 0 usecs
[   15.306764] [drm] ib test on ring 5 succeeded
[   15.307153] [drm] Radeon Display Connectors
[   15.314633] [drm] Internal thermal controller with fan control
[   15.315475] [drm] radeon: power management initialized
[   15.315633] radeon 0000:01:00.0: No connectors reported connected with modes
[   15.315636] [drm] Cannot find any crtc or sizes - going 1024x768
[   15.316455] [drm] fb mappable at 0x40474000
[   15.316457] [drm] vram apper at 0x40000000
[   15.316458] [drm] size 3145728
[   15.316459] [drm] fb depth is 24
[   15.316460] [drm]    pitch is 4096
[   15.316462] checking generic (50000000 410000) vs hw (40000000 10000000)
[   15.316542] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[   15.316545] radeon 0000:01:00.0: registered panic notifier
[   15.316563] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[   15.317241] [drm] Memory usable by graphics device = 2048M
[   15.317244] checking generic (50000000 410000) vs hw (50000000 10000000)
[   15.317246] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[   15.317272] Console: switching to colour dummy device 80x25
[   15.374496] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[   15.374510] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.374512] [drm] Driver supports precise vblank timestamp query.
[   15.374591] vga_switcheroo: enabled
[   15.374703] ATPX version 1, functions 0x00000033
[   15.374863] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[   15.374867] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[   15.396669] [drm] Wrong MCH_SSKPD value: 0x16040307
[   15.396673] [drm] This can cause pipe underruns and display issues.
[   15.396674] [drm] Please upgrade your BIOS to fix this.
[   15.413667] fbcon: inteldrmfb (fb0) is primary device
[   16.051178] Console: switching to colour frame buffer device 170x48
[   16.053752] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   16.053955] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   16.063712] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   16.064299] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff8802322e59d8 (20131115/exresop-422)
[   16.064304] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20131115/dswexec-461)
[   16.064308] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8802360e59d8), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[   16.064313] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCM] (Node ffff88023612b050), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[   16.064319] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[   16.064383] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input9
[   16.064457] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   16.065060] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   16.065539] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880232b211f8 (20131115/exresop-422)
[   16.065543] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20131115/dswexec-461)
[   16.065547] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8802360e59d8), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[   16.065553] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[   16.066169] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880233e1e240 (20131115/exresop-422)
[   16.066173] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20131115/dswexec-461)
[   16.066177] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8802360e59d8), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[   16.066182] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD05._BCM] (Node ffff8802360e5ca8), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[   16.066187] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[   16.066689] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880232b21000 (20131115/exresop-422)
[   16.066693] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20131115/dswexec-461)
[   16.066696] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8802360e59d8), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[   16.066701] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD06._BCM] (Node ffff8802360e5de8), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[   16.066706] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[   16.067184] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880233e1e510 (20131115/exresop-422)
[   16.067187] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20131115/dswexec-461)
[   16.067191] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8802360e59d8), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[   16.067196] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD07._BCM] (Node ffff8802360e5f28), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[   16.067200] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[   16.067652] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880232b21120 (20131115/exresop-422)
[   16.067655] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20131115/dswexec-461)
[   16.067659] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD02._BCM] (Node ffff8802360e59d8), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[   16.067663] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0.DD08._BCM] (Node ffff8802360e7078), AE_AML_OPERAND_TYPE (20131115/psparse-536)
[   16.067668] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[   16.067741] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input10
[   16.067828] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[   16.068650] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   16.162719] mute LED gpio 8 polarity 1
[   16.162906] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   16.162908]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.162909]    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   16.162910]    mono: mono_out=0x0
[   16.162911]    inputs:
[   16.162913]      Internal Mic=0x11
[   16.162914]      Mic=0xa
[   16.228322] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   16.228400] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   16.228467] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   16.836056] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   19.436102] init: failsafe main process (864) killed by TERM signal
[   21.071302] [drm] Disabling audio 0 support
[   21.075381] audit_printk_skb: 24 callbacks suppressed
[   21.075384] type=1400 audit(1400826657.385:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=988 comm="apparmor_parser"
[   21.075391] type=1400 audit(1400826657.385:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=988 comm="apparmor_parser"
[   21.075396] type=1400 audit(1400826657.385:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=988 comm="apparmor_parser"
[   21.075835] type=1400 audit(1400826657.385:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=988 comm="apparmor_parser"
[   21.075839] type=1400 audit(1400826657.385:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=988 comm="apparmor_parser"
[   21.076067] type=1400 audit(1400826657.385:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=988 comm="apparmor_parser"
[   21.278688] type=1400 audit(1400826657.585:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=991 comm="apparmor_parser"
[   21.289366] type=1400 audit(1400826657.597:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=992 comm="apparmor_parser"
[   21.344492] type=1400 audit(1400826657.653:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=987 comm="apparmor_parser"
[   21.344505] type=1400 audit(1400826657.653:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=987 comm="apparmor_parser"
[   24.289109] [drm] PCIE gen 2 link speeds already enabled
[   24.292800] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[   24.292890] radeon 0000:01:00.0: WB enabled
[   24.292893] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023369bc00
[   24.292895] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023369bc0c
[   24.293446] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90011ab2118
[   24.309654] [drm] ring test on 0 succeeded in 1 usecs
[   24.309715] [drm] ring test on 3 succeeded in 1 usecs
[   24.364609] init: cups main process (1172) killed by HUP signal
[   24.364627] init: cups main process ended, respawning
[   24.397947] Bluetooth: Core ver 2.17
[   24.397966] NET: Registered protocol family 31
[   24.397968] Bluetooth: HCI device and connection manager initialized
[   24.397977] Bluetooth: HCI socket layer initialized
[   24.397980] Bluetooth: L2CAP socket layer initialized
[   24.397984] Bluetooth: SCO socket layer initialized
[   24.495484] [drm] ring test on 5 succeeded in 1 usecs
[   24.495492] [drm] UVD initialized successfully.
[   24.495496] [drm] Enabling audio 0 support
[   24.495550] [drm] ib test on ring 0 succeeded in 0 usecs
[   24.495603] [drm] ib test on ring 3 succeeded in 1 usecs
[   24.654183] Bluetooth: RFCOMM TTY layer initialized
[   24.654196] Bluetooth: RFCOMM socket layer initialized
[   24.654202] Bluetooth: RFCOMM ver 1.11
[   24.656214] [drm] ib test on ring 5 succeeded
[   24.723872] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.723876] Bluetooth: BNEP filters: protocol multicast
[   24.723885] Bluetooth: BNEP socket layer initialized
[   29.071715] systemd-logind[1386]: New seat seat0.
[   29.161747] systemd-logind[1386]: Watching system buttons on /dev/input/event2 (Power Button)
[   29.161820] systemd-logind[1386]: Watching system buttons on /dev/input/event9 (Video Bus)
[   29.161891] systemd-logind[1386]: Watching system buttons on /dev/input/event0 (Power Button)
[   29.161958] systemd-logind[1386]: Watching system buttons on /dev/input/event8 (Video Bus)
[   29.162019] systemd-logind[1386]: Watching system buttons on /dev/input/event1 (Lid Switch)
[   29.498840] init: samba-ad-dc main process (1316) terminated with status 1
[   29.874839] [drm] Disabling audio 0 support
[   31.174859] r8169 0000:07:00.2 eth0: link down
[   31.174908] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.175242] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.176892] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[   31.561857] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[   31.680626] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   31.680969] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   33.586175] wlan0: authenticate with 00:24:d4:d4:78:b4
[   33.586264] wlan0: send auth to 00:24:d4:d4:78:b4 (try 1/3)
[   33.587941] wlan0: authenticated
[   33.589982] wlan0: associate with 00:24:d4:d4:78:b4 (try 1/3)
[   33.592550] wlan0: RX AssocResp from 00:24:d4:d4:78:b4 (capab=0x411 status=0 aid=2)
[   33.592762] wlan0: associated
[   33.592783] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   34.237588] [drm] PCIE gen 2 link speeds already enabled
[   34.240911] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[   34.241000] radeon 0000:01:00.0: WB enabled
[   34.241003] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023369bc00
[   34.241005] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023369bc0c
[   34.241556] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90011ab2118
[   34.257763] [drm] ring test on 0 succeeded in 1 usecs
[   34.257823] [drm] ring test on 3 succeeded in 1 usecs
[   34.453512] [drm] ring test on 5 succeeded in 1 usecs
[   34.453519] [drm] UVD initialized successfully.
[   34.453521] [drm] Enabling audio 0 support
[   34.453572] [drm] ib test on ring 0 succeeded in 0 usecs
[   34.453624] [drm] ib test on ring 3 succeeded in 1 usecs
[   34.614238] [drm] ib test on ring 5 succeeded
[   36.204760] init: plymouth-upstart-bridge main process ended, respawning
[   36.214047] init: plymouth-upstart-bridge main process (1634) terminated with status 1
[   36.214060] init: plymouth-upstart-bridge main process ended, respawning
[   36.661424] webcamstudio: module verification failed: signature and/or  required key missing - tainting kernel
[   36.661743] webcamstudio driver version 1.0.9 loaded
[   37.158132] systemd-logind[1386]: New session c1 of user asatysco2.
[   37.158356] systemd-logind[1386]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[   37.584619] Non-volatile memory driver v1.3
[   39.168152] init: plymouth-stop pre-start process (1908) terminated with status 1
[   39.290374] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   39.867388] [drm] Disabling audio 0 support
[   53.305990] [drm] PCIE gen 2 link speeds already enabled
[   53.309304] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[   53.309393] radeon 0000:01:00.0: WB enabled
[   53.309396] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023369bc00
[   53.309398] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023369bc0c
[   53.309948] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90011ab2118
[   53.326103] [drm] ring test on 0 succeeded in 1 usecs
[   53.326162] [drm] ring test on 3 succeeded in 1 usecs
[   53.511926] [drm] ring test on 5 succeeded in 1 usecs
[   53.511934] [drm] UVD initialized successfully.
[   53.511936] [drm] Enabling audio 0 support
[   53.511986] [drm] ib test on ring 0 succeeded in 0 usecs
[   53.512038] [drm] ib test on ring 3 succeeded in 1 usecs
[   53.672658] [drm] ib test on ring 5 succeeded
[   54.327701] audit_printk_skb: 90 callbacks suppressed
[   54.327705] type=1400 audit(1400826690.613:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2231 comm="apparmor_parser"
[   54.327711] type=1400 audit(1400826690.613:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2231 comm="apparmor_parser"
[   54.328151] type=1400 audit(1400826690.613:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2231 comm="apparmor_parser"
[   58.900944] [drm] Disabling audio 0 support

Gaara · Le 23/05/2014, à 10:49

moko138 a écrit :

gaara a écrit :
J'essaie de voir si le bug se retrouve avec le kernel 3.15
J'ai suivi ce tuto et ça à l'air de fonctionner, sauf CdEmu (lecteur cd/dvd virtuel) qui plante.
A voir avec plusieurs reboot...
Ah ah ! Et donc, 4 jours après ?

Je suis revenu au 3.13.0-24-generic, et tout fonctionne bien. Pour la durée du boot, rien de particulier, faut dire que j'ai un ssd.
un extrait de mon /etc/default/grub: (classique, sans "quiet splash")

GRUB_DEFAULT="0"
#GRUB_HIDDEN_TIMEOUT="0"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#26 Le 02/05/2014, à 13:57

Re : [Résolu] Démarrage parfois rock'n roll

#27 Le 02/05/2014, à 14:37

Re : [Résolu] Démarrage parfois rock'n roll

#28 Le 02/05/2014, à 14:42

Re : [Résolu] Démarrage parfois rock'n roll

#29 Le 02/05/2014, à 14:52

Re : [Résolu] Démarrage parfois rock'n roll

#30 Le 02/05/2014, à 15:02

Re : [Résolu] Démarrage parfois rock'n roll

#31 Le 02/05/2014, à 15:05

Re : [Résolu] Démarrage parfois rock'n roll

#32 Le 02/05/2014, à 15:06

Re : [Résolu] Démarrage parfois rock'n roll

#33 Le 02/05/2014, à 15:30

Re : [Résolu] Démarrage parfois rock'n roll

#34 Le 02/05/2014, à 16:01

Re : [Résolu] Démarrage parfois rock'n roll

#35 Le 02/05/2014, à 16:26

Re : [Résolu] Démarrage parfois rock'n roll

#36 Le 02/05/2014, à 16:49

Re : [Résolu] Démarrage parfois rock'n roll

#37 Le 02/05/2014, à 16:56

Re : [Résolu] Démarrage parfois rock'n roll

#38 Le 02/05/2014, à 16:57

Re : [Résolu] Démarrage parfois rock'n roll

#39 Le 02/05/2014, à 17:00

Re : [Résolu] Démarrage parfois rock'n roll

#40 Le 02/05/2014, à 17:09

Re : [Résolu] Démarrage parfois rock'n roll

#41 Le 02/05/2014, à 17:16

Re : [Résolu] Démarrage parfois rock'n roll

#42 Le 02/05/2014, à 17:52

Re : [Résolu] Démarrage parfois rock'n roll

#43 Le 02/05/2014, à 18:27

Re : [Résolu] Démarrage parfois rock'n roll

#44 Le 03/05/2014, à 12:12

Re : [Résolu] Démarrage parfois rock'n roll

#45 Le 07/05/2014, à 09:58

Re : [Résolu] Démarrage parfois rock'n roll

#46 Le 07/05/2014, à 14:55

Re : [Résolu] Démarrage parfois rock'n roll

#47 Le 07/05/2014, à 15:06

Re : [Résolu] Démarrage parfois rock'n roll

#48 Le 07/05/2014, à 15:39

Re : [Résolu] Démarrage parfois rock'n roll

#49 Le 23/05/2014, à 08:34

Re : [Résolu] Démarrage parfois rock'n roll

#50 Le 23/05/2014, à 10:49

Re : [Résolu] Démarrage parfois rock'n roll

Pied de page des forums