[Clos] Centralisation Probleme Webcam+EasyCam

Anbreizh · Le 22/02/2006, à 23:15

Ah .......... Tu peux me passer le resultat de ton lsusb ?
Je pense que tu utilise le drivers spca5xx, je vais voir pourquoi ca peut freeze (habituellement, probleme de gcc)

penkoad · Le 23/02/2006, à 01:16

Salut,
J'ai installé ce soir ma toute nouvelle QuickCam communicate STX (Logitech) et comme belgarath1973 j'ai eu toutes les peines du monde à cause du blocage (freeze) de l'écran.
Il faut dire, car je pense que cela venait de là, que j'avais anciennement une vieille webcam de chez Logitech aussi.

Après moults essais de nettoyage de ma config http://doc.ubuntu-fr.org/materiel/webca … potentiels , j'ai fait un tour là :

/lib/modules/2.6.12-10-686/kernel/drivers/usb/media$ ls
dsbr100.ko  konicawc.ko  pwc       se401.ko    spca5xx     stv680.ko    usbvideo.ko  w9968cf.ko
ibmcam.ko   ov511.ko     quickcam  sn9c102.ko  spca5xx.ko  ultracam.ko  vicam.ko

Après un rm bien senti de tout le contenu du repertoire (ouais je sais mode brut-force ), j'ai refait l'installation avec EasyCam2 (merci Anbreizh !! Breizh Atao ! ) et là ça marche comme dans un rêve !

Mon repertoire ne contient plus que

/lib/modules/2.6.12-10-686/kernel/drivers/usb$ ls media/
spca5xx.ko

Pour info, la webcam marche comme un charme dans gnomeMeeting et dans aMsn...:cool:

Dernière modification par penkoad (Le 23/02/2006, à 01:18)

belgarath1973 · Le 23/02/2006, à 09:58

OK Anbreizh !
Je te donne ça ce soir (je suis au boulot....)
Merci pour ta réactivité;)

Anbreizh · Le 23/02/2006, à 11:44

@ penkoad : Je pense aussi que c'est un peu brutose !

Ca ma permis au moyen de comprend d'ou vient le probleme je pense
Je vais modifier EasyCam 2 en consequance.

Je vous tient au courant

Anbreizh · Le 23/02/2006, à 12:03

Je viens de faire la mise a jour !

Alors les nouveauté sont les suivantes :

- Copier du dossier /lib/modules/`uname -r`/kernel/drivers/usb/media vers /lib/modules/`uname -r`/kernel/drivers/usb/media-back avant l'installation, pour recuperer en cas de probleme
- Suppresion de tout les modules et dossier suivant (si existant ) :

spca5xx spca5xx.ko pwc quickcam ov51x.ko ov511.ko ov519.ko pwc.ko

Pour permettre une installation propre

Ces modifications devrait normalement aidé pour les problemes de Freeze car il etais souvent du a un melange des versions des drivers !

J'attend vos retours !

Anbreizh · Le 23/02/2006, à 12:16

La version 1.99-2c avait un petit bug du a mon inattention ..........
Je viens d'envoyer la nouvelle miss a jour !

Isaric · Le 23/02/2006, à 15:32

Je profite aussi pour te remercier Anbreizh pour Easycam2.

Anbreizh a écrit :

@ Isaric : Tout a l'air OK pourtant au niveau du drivers ....

Non plus maintenant.
J'ai installé aMSN 0.95 cvs de synaptic (et non l'autre amsncvs).

J'ai installé Easycam2 1.99-6d et pas de webcam

isaric@acer:~$ dmesg
ey pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295679.162000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295680.250000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295680.250000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295680.395000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295680.395000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295680.501000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295680.501000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295680.585000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295680.585000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295680.661000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295680.661000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295680.686000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295680.686000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295680.762000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295680.762000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295680.791000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295680.791000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295680.897000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295680.897000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295681.923000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295681.923000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295681.938000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295681.938000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295681.944000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295681.944000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295682.305000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295682.305000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295682.690000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295682.690000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295682.855000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295682.855000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295684.021000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295684.021000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295684.764000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295684.764000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295684.999000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295684.999000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295685.105000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295685.105000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295685.189000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295685.189000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295685.265000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295685.265000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295685.290000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295685.290000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295685.425000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295685.425000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295685.899000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295685.899000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295686.034000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295686.034000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295699.151000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295699.151000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295699.313000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295699.313000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295700.113000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295700.113000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295700.278000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295700.278000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295700.332000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295700.332000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295700.438000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295700.438000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295746.229000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295746.229000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295746.394000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295746.394000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295746.567000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295746.567000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295746.732000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295746.732000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295755.583000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295755.583000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295756.325000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295756.325000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295759.754000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295759.754000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295759.830000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295759.830000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295760.479000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295760.479000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295760.644000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295760.644000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295761.296000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295761.296000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295761.431000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295761.431000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295762.112000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295762.112000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295762.218000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295762.218000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295764.289000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295764.289000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295764.365000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295764.365000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295764.449000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295764.449000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295764.643000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295764.643000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295764.727000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295764.727000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295764.981000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295764.981000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295765.273000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295765.273000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295765.408000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295765.408000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295765.492000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295765.492000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295765.598000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295765.598000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295766.007000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295766.007000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295766.172000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295766.172000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295766.974000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295766.974000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295767.109000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295767.109000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295767.193000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295767.193000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295767.329000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295767.329000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295769.813000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295769.813000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295769.919000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295769.919000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295771.198000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295771.198000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295771.304000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295771.304000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295771.388000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295771.388000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295771.464000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295771.464000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295771.518000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295771.518000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295771.624000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295771.624000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295771.678000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295771.678000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295771.843000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295771.843000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295772.495000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295772.495000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295772.630000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295772.630000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295772.684000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295772.684000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295772.820000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295772.820000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295773.230000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295773.230000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295773.395000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295773.395000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295774.344000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295774.344000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295774.453000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295774.453000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295774.863000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295774.863000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295775.028000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295775.028000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295811.704000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295811.704000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295811.839000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295811.839000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295811.894000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295811.894000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295812.000000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295812.000000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295812.054000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295812.054000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295812.130000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295812.130000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295812.303000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295812.303000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295812.409000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295812.409000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295828.169000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295828.169000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295828.304000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295828.304000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
isaric@acer:~$

Anbreizh · Le 23/02/2006, à 15:39

Tu peux me donner les messages dans la console avec un "lauchcam2" et apres le dmesg quand tu branche ta webcam ?

Isaric · Le 23/02/2006, à 16:41

isaric@acer:~$ lauchcam2
mkdir: Ne peut créer le répertoire `/lib/modules/2.6.12-10-386/kernel/drivers/usb/media-back': Le fichier existe.
cp: omission du répertoire `/lib/modules/2.6.12-10-386/kernel/drivers/usb/media/pwc'
cp: omission du répertoire `/lib/modules/2.6.12-10-386/kernel/drivers/usb/media/quickcam'
cp: omission du répertoire `/lib/modules/2.6.12-10-386/kernel/drivers/usb/media/spca5xx'
mknod: `/dev/video0': Le fichier existe.
ln: `/lib/modules/2.6.12-10-386/build': fichier existant.
make: *** Pas de règle pour fabriquer la cible « clean ». Arrêt.
   Building SPCA5XX driver for 2.5/2.6 kernel.
   Remember: you must have read/write access to your kernel source tree.
make -C /lib/modules/`uname -r`/build SUBDIRS=/usr/share/EasyCam2/drivers/spca CC=cc modules
make: *** /lib/modules/2.6.12-10-386/build: Aucun fichier ou répertoire de ce type. Arrêt.
make: *** [default] Erreur 2
mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb/media/
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/spca50x.ko
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/et61x.ko
install -c -m 0644 spca5xx.ko /lib/modules/`uname -r`/kernel/drivers/usb/media/
install: ne peut évaluer `spca5xx.ko': Aucun fichier ou répertoire de ce type
make: *** [install] Erreur 1
isaric@acer:~$

isaric@acer:~$ dmesg
ernel memory: 224k freed
[4294673.164000] vga16fb: initializing
[4294673.164000] vga16fb: mapped to 0xc00a0000
[4294673.286000] Console: switching to colour frame buffer device 80x30
[4294673.286000] fb0: VGA16 VGA frame buffer device
[4294673.299000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294674.388000] Capability LSM initialized
[4294674.397000] NET: Registered protocol family 1
[4294674.406000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294674.406000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294674.406000] ACPI: bus type ide registered
[4294674.415000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[4294674.415000] SIS5513: chipset revision 1
[4294674.415000] SIS5513: not 100% native mode: will probe irqs later
[4294674.415000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[4294674.415000]     ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
[4294674.415000]     ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
[4294674.415000] Probing IDE interface ide0...
[4294674.679000] hda: ST3160021A, ATA DISK drive
[4294675.291000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294675.291000] Probing IDE interface ide1...
[4294675.963000] hdc: DVD-ROM BDV316E, ATAPI CD/DVD-ROM drive
[4294676.677000] hdd: HL-DT-ST DVDRAM GSA-4040B, ATAPI CD/DVD-ROM drive
[4294676.728000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.728000] Probing IDE interface ide2...
[4294677.241000] Probing IDE interface ide3...
[4294677.753000] Probing IDE interface ide4...
[4294678.265000] Probing IDE interface ide5...
[4294678.779000] hda: max request size: 1024KiB
[4294678.780000] hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
[4294678.780000] hda: cache flushes supported
[4294678.780000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 > p4
[4294678.821000] hdc: ATAPI 40X DVD-ROM drive, 512kB Cache
[4294678.821000] Uniform CD-ROM driver Revision: 3.20
[4294678.825000] hdd: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[4294679.160000] Attempting manual resume
[4294679.160000] swsusp: Suspend partition has wrong signature?
[4294679.197000] usbcore: registered new driver usbfs
[4294679.197000] usbcore: registered new driver hub
[4294679.197000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294679.197000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
[4294679.197000] ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
[4294679.221000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[4294679.221000] ohci_hcd 0000:00:03.0: irq 20, io mem 0xeb013000
[4294679.274000] hub 1-0:1.0: USB hub found
[4294679.274000] hub 1-0:1.0: 3 ports detected
[4294679.277000] ACPI: PCI Interrupt 0000:00:03.1[b] -> GSI 21 (level, low) -> IRQ 21
[4294679.277000] ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
[4294679.289000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[4294679.289000] ohci_hcd 0000:00:03.1: irq 21, io mem 0xeb016000
[4294679.342000] hub 2-0:1.0: USB hub found
[4294679.342000] hub 2-0:1.0: 3 ports detected
[4294679.345000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
[4294679.345000] ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
[4294679.357000] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[4294679.357000] ohci_hcd 0000:00:03.2: irq 22, io mem 0xeb010000
[4294679.410000] hub 3-0:1.0: USB hub found
[4294679.410000] hub 3-0:1.0: 2 ports detected
[4294679.431000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
[4294679.431000] ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
[4294679.431000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[4294679.431000] ehci_hcd 0000:00:03.3: irq 23, io mem 0xeb011000
[4294679.431000] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[4294679.431000] ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294679.431000] hub 4-0:1.0: USB hub found
[4294679.431000] hub 4-0:1.0: 8 ports detected
[4294679.459000] sis900.c: v1.08.08 Jan. 22 2005
[4294679.459000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
[4294679.460000] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[4294679.468000] 0000:00:04.0: Using transceiver found at address 1 as default
[4294679.469000] eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:0d:87:bf:88:f7.
[4294680.824000] usb 1-1: new low speed USB device using ohci_hcd and address 3
[4294681.119000] usb 2-1: new low speed USB device using ohci_hcd and address 2
[4294681.410000] usb 2-2: new full speed USB device using ohci_hcd and address 3[4294681.694000] usb 2-3: new full speed USB device using ohci_hcd and address 4[4294681.804000] usbcore: registered new driver hiddev
[4294681.816000] input: USB HID v1.10 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:03.0-1
[4294681.840000] input,hiddev96: USB HID v1.10 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:03.0-1
[4294691.846000] drivers/usb/input/hid-core.c: timeout initializing reports
[4294691.846000]
[4294691.848000] input: USB HID v1.10 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:03.0-1
[4294691.856000] input: USB HID v1.10 Device [Cypress Semiconductor Cypress CY7C637xx USB Mouse v?.?] on usb-0000:00:03.1-1
[4294691.856000] usbcore: registered new driver usbhid
[4294691.856000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294692.033000] usb 3-1: new low speed USB device using ohci_hcd and address 2
[4294692.140000] input: USB HID v1.10 Mouse [062a:0001] on usb-0000:00:03.2-1
[4294692.230000] ACPI: Fan [FAN] (on)
[4294692.233000] ACPI: CPU0 (power states: C1[C1])
[4294692.233000] ACPI: Thermal Zone [THRM] (40 C)
[4294692.375000] Attempting manual resume
[4294692.399000] swsusp: Suspend partition has wrong signature?
[4294692.430000] kjournald starting.  Commit interval 5 seconds
[4294692.430000] EXT3-fs: mounted filesystem with ordered data mode.
[4294693.560000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294696.013000] Adding 2048248k swap on /dev/hda6.  Priority:-1 extents:1
[4294696.154000] EXT3 FS on hda2, internal journal
[4294700.673000] parport: PnPBIOS parport detected.
[4294700.673000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[4294700.760000] lp0: using parport0 (interrupt-driven).
[4294700.794000] mice: PS/2 mouse device common for all mice
[4294700.838000] ieee1394: Initialized config rom entry `ip1394'
[4294700.844000] SCSI subsystem initialized
[4294700.878000] sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
[4294700.893000] Linux agpgart interface v0.101 (c) Dave Jones
[4294700.910000] nvidia: module license 'NVIDIA' taints kernel.
[4294700.916000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294700.916000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7667 Fri Jun 17 07:01:04 PDT 2005
[4294703.142000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294703.719000] cdrom: open failed.
[4294703.731000] cdrom: open failed.
[4294704.487000] kjournald starting.  Commit interval 5 seconds
[4294704.487000] EXT3 FS on hda4, internal journal
[4294704.487000] EXT3-fs: mounted filesystem with ordered data mode.
[4294704.499000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[4294705.349000] agpgart: Unsupported SiS chipset (device id: 0755)
[4294705.398000] agpgart: Detected AGP bridge 0
[4294705.415000] agpgart: AGP aperture is 128M @ 0xe0000000
[4294705.481000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294705.485000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294705.485000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294705.711000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
[4294706.020000] intel8x0_measure_ac97_clock: measured 49716 usecs
[4294706.020000] intel8x0: clocking to 48000
[4294706.480000] Linux video capture interface: v1.00
[4294706.518000] bttv: driver version 0.9.15 loaded
[4294706.518000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[4294706.522000] bttv: Bt8xx card found (0).
[4294706.522000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
[4294706.522000] bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 18, latency: 32, mmio: 0xeb014000
[4294706.522000] bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
[4294706.522000] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
[4294706.522000] bttv0: gpio: en=00000000, out=00000000 in=003ffdf9 [init]
[4294706.539000] bttv0: using tuner=3
[4294706.539000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[4294706.541000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[4294706.543000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[4294706.545000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[4294706.567000] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
[4294706.567000] tuner 0-0061: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
[4294706.607000] bttv0: registered device video0
[4294706.608000] bttv0: registered device vbi0
[4294706.608000] bttv0: registered device radio0
[4294706.608000] bttv0: PLL: 28636363 => 35468950 .. ok
[4294706.634000] bttv0: add subdevice "remote0"
[4294706.753000] bt878: AUDIO driver version 0.0.0 loaded
[4294706.757000] bt878: Bt878 AUDIO function found (0).
[4294706.757000] ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 18 (level, low) -> IRQ 18
[4294706.757000] bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 18, latency: 32, memory: 0xeb015000
[4294706.866000] ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
[4294706.866000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17
[4294706.866000] PCI: Via IRQ fixup for 0000:00:0c.0, from 9 to 1
[4294706.923000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17]  MMIO=[eb017000-eb0177ff]  Max Packet=[2048]
[4294708.190000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00000ae6ff18383d][4294708.885000] Initializing USB Mass Storage driver...
[4294708.890000] scsi0 : SCSI emulation for USB Mass Storage devices
[4294708.893000] usb-storage: device found at 4
[4294708.893000] usb-storage: waiting for device to settle before scanning
[4294708.893000] usbcore: registered new driver usb-storage
[4294708.893000] USB Mass Storage support registered.
[4294709.104000] Real Time Clock Driver v1.12
[4294709.137000] input: PC Speaker
[4294709.272000] Floppy drive(s): fd0 is 1.44M
[4294709.287000] FDC 0 is a post-1991 82077
[4294709.679000] ts: Compaq touchscreen protocol output
[4294711.187000] NET: Registered protocol family 17
[4294713.178000] eth0: Media Link On 100mbps full-duplex
[4294713.898000]   Vendor:           Model: USB Card Reader   Rev: 1.1f
[4294713.898000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[4294713.905000]   Vendor:           Model: USB Card Reader   Rev: 1.1f
[4294713.905000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[4294713.913000]   Vendor:           Model: USB Card Reader   Rev: 1.1f
[4294713.913000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[4294713.920000]   Vendor:           Model: USB Card Reader   Rev: 1.1f
[4294713.920000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[4294713.925000] usb-storage: device scan complete
[4294714.079000] Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
[4294714.139000] Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
[4294714.171000] Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
[4294714.205000] Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
[4294716.277000] NET: Registered protocol family 10
[4294716.277000] Disabled Privacy Extensions on device c02eb280(lo)
[4294716.277000] IPv6 over IPv4 tunneling driver
[4294717.165000] ACPI: Power Button (FF) [PWRF]
[4294717.165000] ACPI: Power Button (CM) [PWRB]
[4294717.165000] ACPI: Sleep Button (CM) [FUTS]
[4294717.252000] ibm_acpi: ec object not found
[4294722.566000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294722.566000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294722.567000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[4294722.835000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294722.835000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294722.835000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[4294726.091000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294726.091000] apm: overridden by ACPI.
[4294727.173000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4)
[4294727.174000] powernow-k8: invalid freq entries 2000000 kHz vs. 1667000 kHz
[4294727.174000] powernow-k8: invalid freq entries 1800000 kHz vs. 1500000 kHz
[4294727.174000] powernow-k8: invalid freq entries 800000 kHz vs. 667000 kHz
[4294727.175000] powernow-k8: invalid powernow_table
[4294727.239000] eth0: no IPv6 routers present
[4294727.533000] Bluetooth: Core ver 2.7
[4294727.533000] NET: Registered protocol family 31
[4294727.533000] Bluetooth: HCI device and connection manager initialized
[4294727.533000] Bluetooth: HCI socket layer initialized
[4294727.674000] Bluetooth: L2CAP ver 2.7
[4294727.674000] Bluetooth: L2CAP socket layer initialized
[4294727.703000] Bluetooth: RFCOMM ver 1.5
[4294727.703000] Bluetooth: RFCOMM socket layer initialized
[4294727.703000] Bluetooth: RFCOMM TTY layer initialized
[4294807.609000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4294807.609000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294807.714000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4294807.714000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294815.850000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4294815.850000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294815.956000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4294815.956000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294849.459000] spca5xx: no version for "struct_module" found: kernel tainted.
[4294849.459000] spca5xx: no version magic, tainting kernel.
[4294849.467000] usbcore: registered new driver spca5xx
[4294849.467000] drivers/usb/media/spca5xx/spca5xx-core.c: spca5xx driver 00.57.02 registered
[4294919.845000] usb 2-2: USB disconnect, address 3
[4294923.022000] usb 2-2: new full speed USB device using ohci_hcd and address 5[4294930.606000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4294930.606000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294930.830000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4294930.830000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294931.062000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4294931.062000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294931.256000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4294931.256000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
isaric@acer:~$

Anbreizh · Le 23/02/2006, à 17:21

Il faut que tu installer les linux-header

ar louarn · Le 23/02/2006, à 17:38

Bonjour Anbreizh,
Je reviens timidement à la charge pour ma webcam. Je t'avais déjà parlé de ce problème : je suis un balbutiant en système linux, c'est pour cela qu'il faut m'expliquer comme à un enfant. Voilà, j'ai une webcam Maxell MaxcamPlus qui fonctionne sous Windows, mais pas sous Ubuntu. Tu m'avais conseillé de désinstaller Easycam1 et installer Easycam2 - ce que j'ai fait. Maintenant, lorsque je lance la webcam, le système me dit que j'ai un pilote nommé :"Bus 003 Device 002: ID05a9:8519 Omnivision Technologies, Inc. Il s'installe et j'ai OK, mais lorsque je veux ouvrir la webcam, j'ai toujours le message "Could not connect to video device (/dev/video0 - Please check connection). Est-ce qu'il existe une solution ou faut-il attendre ?

Skippy le Grand Gourou · Le 23/02/2006, à 17:44

J'AI L'IMAGE !!! :D:D Anbreizh, tu es un dieu ! Enfin, plutôt un demi-dieu, parce que j'ai une image mais ça clignote une dizaine de fois par seconde avec des trucs tout bizarres :

De quoi ça peut venir ?

Anbreizh · Le 23/02/2006, à 17:47

C'est vrai que c'est artistique ......

Tu as tester les reglages avec V4L et V4L2 (a l'aide de gnomemetting pas exemple ) ?

Skippy le Grand Gourou · Le 23/02/2006, à 18:06

V4L2 marche pô, V4L donne ça...

Anbreizh · Le 23/02/2006, à 18:10

Ta webcam utilise spca5xx en drivers ? Je pense que ca viens du drivers, je pense qu'il faut attendre une prochaine version
Je vais allez faire un tour voir si il n'y a pas du neuf !

Skippy le Grand Gourou · Le 23/02/2006, à 18:12

Ok, tant pis... De toute façon y'a déjà un net progrès, même si c'est pas encore utilisable (sauf éventuellement pour des clips expérimentaux ? )
Merci !

Anbreizh · Le 23/02/2006, à 18:14

C'est vrai, ca peut etre un style bien particulier ! Tente ta chance !

Tu as tester avec plusieur logiciel ? (camorama, gnomemetting, amsn, webcam ... )

Skippy le Grand Gourou · Le 23/02/2006, à 18:29

Ben ça fait exactement la même chose entre camorama, easycam et gnomemeeting... ;/

Anbreizh · Le 23/02/2006, à 19:34

Tu peux me donner ton lsusb ?

Skippy le Grand Gourou · Le 23/02/2006, à 19:50

Bus 001 Device 003: ID 0733:3281 ViewQuest Technologies, Inc.

Isaric · Le 23/02/2006, à 19:57

Avec une Philips SPC 200NC

Anbreizh a écrit :

Il faut que tu installer les linux-header ;)

Cela ne change rien !

Anbreizh · Le 23/02/2006, à 20:19

Tu peux me redonner le resultat de "lauchcam2" maintenant ?

Isaric · Le 23/02/2006, à 20:28

isaric@acer:~$ lauchcam2
mkdir: Ne peut créer le répertoire `/lib/modules/2.6.12-10-386/kernel/drivers/usb/media-back': Le fichier existe.
cp: omission du répertoire `/lib/modules/2.6.12-10-386/kernel/drivers/usb/media/pwc'
cp: omission du répertoire `/lib/modules/2.6.12-10-386/kernel/drivers/usb/media/quickcam'
cp: omission du répertoire `/lib/modules/2.6.12-10-386/kernel/drivers/usb/media/spca5xx'
mknod: `/dev/video0': Le fichier existe.
mknod: `/dev/video1': Le fichier existe.
ln: `/dev/video': fichier existant.
ln: `/lib/modules/2.6.12-10-386/build/linux-headers-2.6.12-10-386': fichier existant.
make: *** Pas de règle pour fabriquer la cible « clean ». Arrêt.
   Building SPCA5XX driver for 2.5/2.6 kernel.
   Remember: you must have read/write access to your kernel source tree.
make -C /lib/modules/`uname -r`/build SUBDIRS=/usr/share/EasyCam2/drivers/spca CC=cc modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.12-10-386 »
  Building modules, stage 2.
  MODPOST
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.12-10-386 »
mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb/media/
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/spca50x.ko
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/et61x.ko
install -c -m 0644 spca5xx.ko /lib/modules/`uname -r`/kernel/drivers/usb/media/
/sbin/depmod -ae
isaric@acer:~$

belgarath1973 · Le 23/02/2006, à 22:07

Salut Anbreizh,

J'ai lancer, comme tu me l'as demandé l'instruction lusb et voici le résultat :

Bus 006 Device 004: ID 07c4:a604 Datafab Systems, Inc.
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 003: ID 03f0:1504 Hewlett-Packard DeskJet 920c
Bus 004 Device 002: ID 04a9:220e Canon, Inc. CanoScan N1240U/LiDE 30
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 055f:c005 Mustek Systems, Inc.
Bus 001 Device 001: ID 0000:0000

Si je lance lauchcam :
barret@ubuntu:~$ lauchcam2
- using device default
- using device default
mkdir: Ne peut créer le répertoire `/lib/modules/2.6.12-10-386/kernel/drivers/us b/media-back': Le fichier existe.
cp: omission du répertoire `/lib/modules/2.6.12-10-386/kernel/drivers/usb/media/ pwc'
cp: omission du répertoire `/lib/modules/2.6.12-10-386/kernel/drivers/usb/media/ quickcam'
cp: omission du répertoire `/lib/modules/2.6.12-10-386/kernel/drivers/usb/media/ spca5xx'
ln: `/lib/modules/2.6.12-10-386/build/linux-headers-2.6.12-10-386': fichier exis tant.
make: *** Pas de règle pour fabriquer la cible « clean ». Arrêt.
Building SPCA5XX driver for 2.5/2.6 kernel.
Remember: you must have read/write access to your kernel source tree.
make -C /lib/modules/`uname -r`/build SUBDIRS=/usr/share/EasyCam2/drivers/spca C C=cc modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.12-10-386 »
Building modules, stage 2.
MODPOST
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.12-10-386 »
mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb/media/
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/spca50x.ko
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/et61x.ko
install -c -m 0644 spca5xx.ko /lib/modules/`uname -r`/kernel/drivers/usb/media/
/sbin/depmod -ae
Bon je suis optimiste, ca va marcher !

Anbreizh · Le 23/02/2006, à 22:20

@ Isaric : C'est vraiment bizarre tout semble OK, tu peux verifier que spca5xx ce trouve bien dans 'lsmod' ? Si ca n'est pas le cas, teste un 'sudo modprobe -f spca5xx'
Tu peux aussi debranche l'USB de ta webcam, le rebrancher et me fournir le "dmesg" ?

@ belgarath1973 : Tu peux faire la meme chose que Isaric ?

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#901 Le 22/02/2006, à 23:15

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#902 Le 23/02/2006, à 01:16

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#903 Le 23/02/2006, à 09:58

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#904 Le 23/02/2006, à 11:44

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#905 Le 23/02/2006, à 12:03

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#906 Le 23/02/2006, à 12:16

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#907 Le 23/02/2006, à 15:32

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#908 Le 23/02/2006, à 15:39

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#909 Le 23/02/2006, à 16:41

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#910 Le 23/02/2006, à 17:21

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#911 Le 23/02/2006, à 17:38

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#912 Le 23/02/2006, à 17:44

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#913 Le 23/02/2006, à 17:47

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#914 Le 23/02/2006, à 18:06

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#915 Le 23/02/2006, à 18:10

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#916 Le 23/02/2006, à 18:12

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#917 Le 23/02/2006, à 18:14

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#918 Le 23/02/2006, à 18:29

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#919 Le 23/02/2006, à 19:34

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#920 Le 23/02/2006, à 19:50

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#921 Le 23/02/2006, à 19:57

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#922 Le 23/02/2006, à 20:19

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#923 Le 23/02/2006, à 20:28

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#924 Le 23/02/2006, à 22:07

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#925 Le 23/02/2006, à 22:20

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Pied de page des forums