[Clos] Centralisation Probleme Webcam+EasyCam

Anbreizh · Le 11/08/2008, à 11:52

bruno33bx : C'est exactement ce qu'aurai fait Easycam dans sa nouvelle version Content de voir que ta webcam fonctionne !

Pour ta webcam guilmarker, je vais regarder ça

Arpete56 · Le 11/08/2008, à 12:32

up

Anbreizh · Le 11/08/2008, à 12:32

Pour enrengister ta webcam :

sudo apt-get install mencoder

mencoder tv:// -tv driver=v4l:width=320:height=240:device=/dev/video0 -ovc lavc -o webcam.avi

Et si tu veux tester le son :

Donne moi le résultat de la commande : ls /dev/dsp

Anbreizh · Le 11/08/2008, à 12:37

Euh Arpete56, je ne trouve plus ton soucis dans le fil ... Désole ! J'ai beaucoup de cas à gerer en parralèle, j'en oublie de temps en temps, excuse moi ...

Tu peux me rappeler ton soucis?

Arpete56 · Le 11/08/2008, à 12:57

Salut Anbreizh,

webcam Creative Live! Cam Video IM Pro) installé avec Easycam2:
Image OK avec cheese et amsn (avatar), mais message d'erreur avec camorama (et d'autres..., en fait tous les autres)
"Could not connect to video device (/dev/video0). Please check connection"

Mon message est le #2267 p91. (avec les infos de dmesg et lsusb -v
Merci si tu entrevois la raison du pb

Kénavo

Anbreizh · Le 11/08/2008, à 13:26

C'est un bug dans camorama (Réponse des dev de chesse). Si ta webcam fonctionne avec cheese et gstreamer-properties, alors c'est un bug de camorama ...

Arpete56 · Le 11/08/2008, à 13:33

OK, merci Anbreizh.
Ce que je trouve curieux, c'est que j'ai le même pb avec "wengophone" avec lequel je ne peux pas avoir non plus d'image. Et bien sûr, c'est avec ce programme que ça m'interesse .......
Je vais continuer à chercher ....

Anbreizh · Le 11/08/2008, à 13:47

Tu a testé Ekiga ?

Arpete56 · Le 11/08/2008, à 13:52

Non, ni linphone, mais effectivement c'est une bonne idée, je vais essayer.
A+

guilmarker · Le 11/08/2008, à 16:03

merci de t'occuper de moi anbreizh

j'ai fait:

mencoder tv:// -tv driver=v4l:width=320:height=240:device=/dev/video0 -ovc lavc -o webcam.avi

et ca m'a repondu:

thierry@thierry:~$ mencoder tv:// -tv driver=v4l:width=320:height=240:device=/dev/video0 -ovc lavc -o webcam.avi
MEncoder 2:1.0~rc2-0ubuntu13 (C) 2000-2007 MPlayer Team
CPU: AMD Sempron(tm) 3000+ (Family: 6, Model: 10, Stepping: 0)
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with runtime CPU detection.
success: format: 9 data: 0x0 - 0x0
TV file format detected.
Selected driver: v4l
name: Video 4 Linux input
author: Alex Beregszaszi
comment: under development
Selected device: Logitech QuickCam USB
Capabilites: capture subcapture
Device type: 513
Supported sizes: 32x32 => 356x292
Inputs: 1
0: Camera: (tuner:0, norm:pal)
Using input 'Camera'
Selected input hasn't got a tuner!
ioctl set picture failed: Invalid argument
The 'outfmt' of 'Planar YV12' is likely not supported by your card
Erreur de segmentation

la reponse a:

ls /dev/dsp

est :

thierry@thierry:~$ ls /dev/dsp
/dev/dsp
thierry@thierry:~$

voila j'espere que ca peut t'aidé

Anbreizh · Le 11/08/2008, à 16:58

Excuse moi ... Je me suis trompé ! Test ça :

mencoder tv:// -tv driver=v4l2:width=320:height=240:device=/dev/video0 -ovc lavc -o webcam.avi

Dernière modification par Anbreizh (Le 11/08/2008, à 17:00)

guilmarker · Le 11/08/2008, à 19:15

inutile de t'excuser.:)
au contraire je suis pret a tout essayer

alors voila le resultat de ta commande:

mencoder tv:// -tv driver=v4l2:width=320:height=240:device=/dev/video0 -ovc lavc -o webcam.avi

thierry@thierry:~$ mencoder tv:// -tv driver=v4l2:width=320:height=240:device=/dev/video0 -ovc lavc -o webcam.avi
MEncoder 2:1.0~rc2-0ubuntu13 (C) 2000-2007 MPlayer Team
CPU: AMD Sempron(tm) 3000+ (Family: 6, Model: 10, Stepping: 0)
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with runtime CPU detection.
success: format: 9 data: 0x0 - 0x0
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
comment: first try, more to come ;-)
v4l2: ioctl query capabilities failed: Unknown error 515
v4l2: ioctl set mute failed: Unknown error 515
v4l2: 0 frames successfully processed, 0 frames dropped.
============ Sorry, this file format is not recognized/supported =============
=== If this file is an AVI, ASF or MPEG stream, please contact the author! ===
Cannot open demuxer.
Exiting...
thierry@thierry:~$

si ca peut aidé , dans gstreamer-properties , c'est avec v4l que je fais marcher ma webcam.

Dernière modification par guilmarker (Le 11/08/2008, à 19:16)

géo · Le 11/08/2008, à 22:45

bonsoir,
depuis quelques jours j'essaye d'installer une webcam creative, mais sans succès.......niveau ubuntu limité.
je vous poste lsusb et dmesg.
pour info avec easycam j'obtiens une mire vidéo.
merci

lsusb:
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 05a9:0518 OmniVision Technologies, Inc. OV518 WebCam
Bus 001 Device 001: ID 0000:0000

dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
[ 0.000000] BIOS-e820: 000000001dff0000 - 000000001dffffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000001dffffc0 - 000000001e000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 479MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 122864) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 122864
[ 0.000000] HighMem 122864 -> 122864
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 122864
[ 0.000000] On node 0 totalpages: 122864
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 927 pages used for memmap
[ 0.000000] Normal zone: 117841 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00E6010 checksum 0
[ 0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00)
[ 0.000000] ACPI: RSDT 1DFFCC66, 0034 (r1 INSYDE RSDT_000 1 _CSI 10103)
[ 0.000000] ACPI: FACP 1DFFFB00, 0074 (r1 INSYDE FACP_000 100 _CSI 10103)
[ 0.000000] ACPI: DSDT 1DFFCF00, 2BF7 (r1 INSYDE INTELIC4 1004 INTL 2002025)
[ 0.000000] ACPI: FACS 1DFFFFC0, 0040
[ 0.000000] ACPI: BOOT 1DFFFB90, 0028 (r1 INSYDE SYS_BOOT 100 _CSI 10103)
[ 0.000000] ACPI: DBGP 1DFFFBC0, 0034 (r1 INSYDE DBGP_000 100 _CSI 10103)
[ 0.000000] ACPI: SSDT 1DFFCC9A, 016F (r1 INSYDE GV3Ref 1001 INTL 2012044)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e1b80000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121905
[ 0.000000] Kernel command line: root=UUID=57d46238-dd10-43a2-bd45-3824fd652a81 ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (013cd000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1396.555 MHz processor.
[ 11.022861] Console: colour VGA+ 80x25
[ 11.022866] console [tty0] enabled
[ 11.023036] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 11.023279] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 11.038360] Memory: 475140k/491456k available (2177k kernel code, 15708k reserved, 1006k data, 368k init, 0k highmem)
[ 11.038370] virtual kernel memory layout:
[ 11.038371] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 11.038373] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 11.038374] vmalloc : 0xde800000 - 0xff7fe000 ( 527 MB)
[ 11.038376] lowmem : 0xc0000000 - 0xddff0000 ( 479 MB)
[ 11.038377] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 11.038379] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)
[ 11.038380] .text : 0xc0100000 - 0xc0320474 (2177 kB)
[ 11.038384] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 11.038428] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 11.118426] Calibrating delay using timer specific routine.. 2795.07 BogoMIPS (lpj=5590154)
[ 11.118456] Security Framework initialized
[ 11.118464] SELinux: Disabled at boot.
[ 11.118484] AppArmor: AppArmor initialized
[ 11.118489] Failure registering capabilities with primary security module.
[ 11.118498] Mount-cache hash table entries: 512
[ 11.118642] Initializing cgroup subsys ns
[ 11.118649] Initializing cgroup subsys cpuacct
[ 11.118660] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000
[ 11.118674] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.118677] CPU: L2 cache: 1024K
[ 11.118680] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 00000000
[ 11.118691] Compat vDSO mapped to ffffe000.
[ 11.118704] Checking 'hlt' instruction... OK.
[ 11.134871] SMP alternatives: switching to UP code
[ 11.137045] Freeing SMP alternatives: 11k freed
[ 11.137174] Early unpacking initramfs... done
[ 11.579371] ACPI: Core revision 20070126
[ 11.579439] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 11.580943] ACPI: setting ELCR to 0200 (from 0ca8)
[ 11.596208] CPU0: Intel(R) Pentium(R) M processor 1400MHz stepping 05
[ 11.596215] SMP motherboard not detected.
[ 11.596217] Local APIC not detected. Using dummy APIC emulation.
[ 11.596269] Brought up 1 CPUs
[ 11.596289] CPU0 attaching sched-domain:
[ 11.596292] domain 0: span 01
[ 11.596294] groups: 01
[ 11.596499] net_namespace: 64 bytes
[ 11.596508] Booting paravirtualized kernel on bare hardware
[ 11.597226] Time: 20:02:20 Date: 08/11/08
[ 11.597256] NET: Registered protocol family 16
[ 11.597486] EISA bus registered
[ 11.597505] ACPI: bus type pci registered
[ 11.597677] PCI: PCI BIOS revision 2.10 entry at 0xe9854, last bus=1
[ 11.597680] PCI: Using configuration type 1
[ 11.597690] Setting up standard PCI resources
[ 11.601360] ACPI: EC: Look up EC in DSDT
[ 11.602920] ACPI: Interpreter enabled
[ 11.602924] ACPI: (supports S0 S3 S4 S5)
[ 11.602940] ACPI: Using PIC for interrupt routing
[ 11.604660] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 11.611830] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 11.611833] ACPI: EC: driver started in interrupt mode
[ 11.611876] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 11.612304] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 11.612308] PCI quirk: region 1300-133f claimed by ICH4 GPIO
[ 11.612766] PCI: Transparent bridge - 0000:00:1e.0
[ 11.612829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.612894] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 11.616014] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *10 11)
[ 11.616116] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 11)
[ 11.616212] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 10 *11)
[ 11.616308] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 10 *11)
[ 11.616400] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 10 *11)
[ 11.616481] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 10 11) *0, disabled.
[ 11.616571] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 10 11)
[ 11.616662] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 10 11) *7
[ 11.616786] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 11.616823] pnp: PnP ACPI init
[ 11.616832] ACPI: bus type pnp registered
[ 11.620733] pnp: PnP ACPI: found 10 devices
[ 11.620736] ACPI: ACPI bus type pnp unregistered
[ 11.620741] PnPBIOS: Disabled by ACPI PNP
[ 11.621000] PCI: Using ACPI for IRQ routing
[ 11.621004] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 11.625587] NET: Registered protocol family 8
[ 11.625590] NET: Registered protocol family 20
[ 11.625666] AppArmor: AppArmor Filesystem Enabled
[ 11.629498] Time: tsc clocksource has been installed.
[ 11.637540] system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
[ 11.637548] system 00:07: ioport range 0x680-0x6ff has been reserved
[ 11.637551] system 00:07: ioport range 0x200-0x20f has been reserved
[ 11.637555] system 00:07: ioport range 0x290-0x297 has been reserved
[ 11.637558] system 00:07: ioport range 0x1000-0x107f has been reserved
[ 11.637562] system 00:07: ioport range 0x1300-0x133f has been reserved
[ 11.637565] system 00:07: ioport range 0x77c-0x77f has been reserved
[ 11.668034] PCI: Bus 2, cardbus bridge: 0000:01:04.0
[ 11.668037] IO window: 0000c400-0000c4ff
[ 11.668041] IO window: 0000c800-0000c8ff
[ 11.668046] PREFETCH window: a0000000-a3ffffff
[ 11.668050] MEM window: e4000000-e7ffffff
[ 11.668054] PCI: Bridge: 0000:00:1e.0
[ 11.668057] IO window: c000-dfff
[ 11.668062] MEM window: e0000000-efffffff
[ 11.668066] PREFETCH window: a0000000-afffffff
[ 11.668079] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 11.668258] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 11.668261] PCI: setting IRQ 5 as level-triggered
[ 11.668265] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 11.668283] NET: Registered protocol family 2
[ 11.705563] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 11.705847] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 11.705967] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 11.706086] TCP: Hash tables configured (established 16384 bind 16384)
[ 11.706089] TCP reno registered
[ 11.717623] checking if image is initramfs... it is
[ 12.169354] Switched to high resolution mode on CPU 0
[ 12.583710] Freeing initrd memory: 7321k freed
[ 12.583956] Simple Boot Flag at 0x37 set to 0x1
[ 12.584351] audit: initializing netlink socket (disabled)
[ 12.584369] audit(1218484941.532:1): initialized
[ 12.587009] VFS: Disk quotas dquot_6.5.1
[ 12.587113] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 12.587299] io scheduler noop registered
[ 12.587302] io scheduler anticipatory registered
[ 12.587304] io scheduler deadline registered
[ 12.587322] io scheduler cfq registered (default)
[ 12.587340] Boot video device is 0000:00:02.0
[ 12.587715] isapnp: Scanning for PnP cards...
[ 12.941532] isapnp: No Plug & Play device found
[ 12.979245] Real Time Clock Driver v1.12ac
[ 12.979371] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.980121] ACPI: PCI Interrupt 0000:00:1f.6[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 12.980133] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 12.980873] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 12.980961] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 12.981108] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 12.989856] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 12.994318] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.994324] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 12.994327] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 12.994330] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 12.994333] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 13.005066] mice: PS/2 mouse device common for all mice
[ 13.005206] EISA: Probing bus 0 at eisa.0
[ 13.005214] Cannot allocate resource for EISA slot 1
[ 13.005243] EISA: Detected 0 cards.
[ 13.005247] cpuidle: using governor ladder
[ 13.005249] cpuidle: using governor menu
[ 13.005372] NET: Registered protocol family 1
[ 13.005408] Using IPI No-Shortcut mode
[ 13.005448] registered taskstats version 1
[ 13.005580] Magic number: 4:920:42
[ 13.005586] hash matches device ttyeb
[ 13.005763] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 13.005765] EDD information not available.
[ 13.005975] Freeing unused kernel memory: 368k freed
[ 13.012205] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 14.251778] fuse init (API version 7.9)
[ 14.275708] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 14.275716] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 15.040328] usbcore: registered new interface driver usbfs
[ 15.040359] usbcore: registered new interface driver hub
[ 15.052279] usbcore: registered new device driver usb
[ 15.111220] SCSI subsystem initialized
[ 15.128240] USB Universal Host Controller Interface driver v3.0
[ 15.128532] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 15.128536] PCI: setting IRQ 10 as level-triggered
[ 15.128540] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 15.128553] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 15.128558] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 15.128946] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 15.128971] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
[ 15.129151] usb usb1: configuration #1 chosen from 1 choice
[ 15.129180] hub 1-0:1.0: USB hub found
[ 15.129187] hub 1-0:1.0: 2 ports detected
[ 15.240195] libata version 3.00 loaded.
[ 15.254747] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 15.472089] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 15.659869] usb 1-2: configuration #1 chosen from 1 choice
[ 16.032051] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 16.032057] PCI: setting IRQ 11 as level-triggered
[ 16.032061] ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 16.032077] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 16.032083] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 16.032135] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 16.032162] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001600
[ 16.032316] usb usb2: configuration #1 chosen from 1 choice
[ 16.032346] hub 2-0:1.0: USB hub found
[ 16.032358] hub 2-0:1.0: 2 ports detected
[ 18.135248] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 18.135255] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 18.135276] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 18.135281] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 18.135332] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 18.139245] ehci_hcd 0000:00:1d.7: debug port 1
[ 18.139252] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 18.139260] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfebff000
[ 18.155064] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 18.155207] usb usb3: configuration #1 chosen from 1 choice
[ 18.155237] hub 3-0:1.0: USB hub found
[ 18.155244] hub 3-0:1.0: 4 ports detected
[ 18.259367] 8139cp 0000:01:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 18.259373] 8139cp 0000:01:02.0: Try the "8139too" driver instead.
[ 18.263564] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 18.263769] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 18.263773] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 18.263814] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 18.263827] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 18.264189] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
[ 18.264192] PCI: setting IRQ 3 as level-triggered
[ 18.264196] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKG] -> GSI 3 (level, low) -> IRQ 3
[ 18.264203] PCI: Setting latency timer of device 0000:01:05.0 to 64
[ 18.316947] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[3] MMIO=[e0000000-e00007ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 18.323480] 8139too Fast Ethernet driver 0.9.28
[ 18.347832] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 18.347838] ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 18.347853] PCI: Setting latency timer of device 0000:01:02.0 to 64
[ 18.348467] eth0: RealTek RTL8139 at 0xc200, 00:40:d0:57:1d:b5, IRQ 11
[ 18.348470] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 18.348579] ata_piix 0000:00:1f.1: version 2.12
[ 18.348593] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 18.348635] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 18.349353] scsi0 : ata_piix
[ 18.349933] scsi1 : ata_piix
[ 18.350830] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[ 18.350834] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[ 18.511447] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100
[ 18.511452] ata1.00: 117210240 sectors, multi 16: LBA48
[ 18.526955] usb 1-2: USB disconnect, address 2
[ 18.528315] ata1.00: configured for UDMA/100
[ 18.766843] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 18.847071] ata2.00: ATAPI: SONY CD-RW/DVD-ROM CRX850E, 5YK3, max UDMA/33
[ 18.954136] usb 1-2: configuration #1 chosen from 1 choice
[ 19.010970] ata2.00: configured for UDMA/33
[ 19.011111] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5
[ 19.011693] scsi 1:0:0:0: CD-ROM SONY CD-RW CRX850E 5YK3 PQ: 0 ANSI: 5
[ 19.030817] Driver 'sd' needs updating - please use bus_type methods
[ 19.030924] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 19.030940] sd 0:0:0:0: [sda] Write Protect is off
[ 19.030943] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.030962] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.031017] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 19.031029] sd 0:0:0:0: [sda] Write Protect is off
[ 19.031032] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.031050] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.031054] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 19.056129] sda1 sda2 < sda5 sda6 > sda4
[ 19.096347] sd 0:0:0:0: [sda] Attached SCSI disk
[ 19.106957] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.106981] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 19.108408] sr0: scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray
[ 19.108414] Uniform CD-ROM driver Revision: 3.20
[ 19.108475] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 19.571573] Attempting manual resume
[ 19.571578] swsusp: Resume From Partition 8:6
[ 19.571580] PM: Checking swsusp image.
[ 19.571744] PM: Resume from disk failed.
[ 19.618653] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0040d001001dc460]
[ 19.625256] kjournald starting. Commit interval 5 seconds
[ 19.625273] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.354187] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.406350] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.492185] iTCO_vendor_support: vendor-support=0
[ 31.566076] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 31.566558] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 31.566608] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 31.623200] Linux agpgart interface v0.102
[ 31.766052] agpgart: Detected an Intel 855GM Chipset.
[ 31.766333] agpgart: Detected 32636K stolen memory.
[ 31.773847] agpgart: AGP aperture is 128M @ 0xb0000000
[ 32.021910] intel_rng: Firmware space is locked read-only. If you can't or
[ 32.021913] intel_rng: don't want to disable this in firmware setup, and if
[ 32.021915] intel_rng: you are certain that your system has a functional
[ 32.021917] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 32.413930] input: Power Button (FF) as /devices/virtual/input/input2
[ 32.425737] ACPI: Power Button (FF) [PWRF]
[ 32.425860] input: Sleep Button (CM) as /devices/virtual/input/input3
[ 32.441715] ACPI: Sleep Button (CM) [SBTN]
[ 32.441822] input: Lid Switch as /devices/virtual/input/input4
[ 32.444451] ACPI: Lid Switch [LID]
[ 32.649813] ACPI: AC Adapter [AC] (on-line)
[ 32.745774] ACPI: Battery Slot [BAT0] (battery present)
[ 32.782148] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 33.429450] ieee80211_crypt: registered algorithm 'NULL'
[ 33.529354] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 33.529360] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 33.733261] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 33.733267] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 33.733412] ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 33.773230] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 34.646032] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf6eb1, caps: 0xa04713/0x0
[ 34.691719] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input6
[ 34.927001] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input7
[ 34.936799] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 36.266013] Linux video capture interface: v2.00
[ 36.291387] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/ov511/ov511.c: USB OV518 video device found
[ 36.292936] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/ov511/ov511.c: Device revision 17
[ 36.304976] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/ov511/ov511.c: Compression required with OV518...enabling
[ 37.672952] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 37.672990] Yenta: CardBus bridge found at 0000:01:04.0 [1071:8051]
[ 37.673007] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 37.673010] Yenta: Routing CardBus interrupts to PCI
[ 37.673015] Yenta TI: socket 0000:01:04.0, mfunc 0x010c1202, devctl 0x44
[ 37.692194] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/ov511/ov511.c: Sensor is an OV6620
[ 37.904020] Yenta: ISA IRQ mask 0x0080, PCI irq 5
[ 37.904025] Socket status: 30000006
[ 37.904028] Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
[ 37.904036] pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
[ 37.904039] cs: IO port probe 0xc000-0xdfff: clean.
[ 37.904585] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff
[ 37.904588] pcmcia: parent PCI bridge Memory window: 0xa0000000 - 0xafffffff
[ 37.911705] ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 37.911732] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 37.913862] udev: renamed network interface eth1 to eth0
[ 37.923477] udev: renamed network interface eth0_rename to eth1
[ 37.927122] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/ov511/ov511.c: Device at usb-0000:00:1d.0-2 registered to minor 0
[ 37.927161] usbcore: registered new interface driver ov511
[ 37.927166] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/ov511/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver
[ 38.079869] usbcore: registered new interface driver ov51x
[ 38.079876] /home/xavier/ov51x-jpeg-1.5.8/ov51x-jpeg-core.c: 1.5.7 : ov51x USB Camera Driver
[ 38.097483] ieee80211_crypt: registered algorithm 'WEP'
[ 38.447468] cs: IO port probe 0x100-0x3af: clean.
[ 38.449065] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 38.449769] cs: IO port probe 0x820-0x8ff: clean.
[ 38.450353] cs: IO port probe 0xc00-0xcf7: clean.
[ 38.451114] cs: IO port probe 0xa00-0xaff: clean.
[ 38.739354] intel8x0_measure_ac97_clock: measured 55462 usecs
[ 38.739359] intel8x0: clocking to 48000
[ 38.975532] loop: module loaded
[ 39.076421] lp: driver loaded but no devices found
[ 39.352469] Adding 1020088k swap on /dev/sda6. Priority:-1 extents:1 across:1020088k
[ 39.471961] NET: Registered protocol family 17
[ 40.145679] EXT3 FS on sda1, internal journal
[ 41.098437] kjournald starting. Commit interval 5 seconds
[ 41.121804] EXT3 FS on sda5, internal journal
[ 41.121811] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.693296] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 42.409291] NET: Registered protocol family 10
[ 42.409595] lo: Disabled Privacy Extensions
[ 42.441257] No dock devices found.
[ 43.921952] apm: BIOS not found.
[ 44.146019] ppdev: user-space parallel port driver
[ 44.324016] audit(1218484973.452:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4999 profile="/usr/sbin/cupsd" namespace="default"
[ 62.279305] Marking TSC unstable due to: cpufreq changes.
[ 62.284870] Time: acpi_pm clocksource has been installed.
[ 104.014705] Clocksource tsc unstable (delta = -69247474 ns)
[ 105.091848] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/ov511/ov511.c: No decompressor available
[ 45.366474] eth1: link down
[ 45.366749] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 79.718684] Bluetooth: Core ver 2.11
[ 79.720761] NET: Registered protocol family 31
[ 79.720770] Bluetooth: HCI device and connection manager initialized
[ 79.720777] Bluetooth: HCI socket layer initialized
[ 45.584664] Bluetooth: L2CAP ver 2.9
[ 45.584671] Bluetooth: L2CAP socket layer initialized
[ 45.656962] Bluetooth: RFCOMM socket layer initialized
[ 45.656978] Bluetooth: RFCOMM TTY layer initialized
[ 45.656980] Bluetooth: RFCOMM ver 1.8
[ 47.906912] [drm] Initialized drm 1.1.0 20060810
[ 47.912405] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 47.912416] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 47.912900] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 47.913050] PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
[ 47.913056] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 47.913373] [drm] Initialized i915 1.6.0 20060119 on minor 1
[ 115.551176] eth0: no IPv6 routers present
[ 141.341817] psmouse.c: TouchPad at isa0060/serio3/input0 lost synchronization, throwing 1 bytes away.
[ 2369.445730] psmouse.c: TouchPad at isa0060/serio3/input0 lost sync at byte 4
[ 2369.447666] psmouse.c: TouchPad at isa0060/serio3/input0 lost sync at byte 1
[ 2369.449780] psmouse.c: TouchPad at isa0060/serio3/input0 lost sync at byte 1
[ 2369.451719] psmouse.c: TouchPad at isa0060/serio3/input0 lost sync at byte 1
[ 2369.465458] psmouse.c: TouchPad at isa0060/serio3/input0 - driver resynched.
[ 2390.803334] psmouse.c: TouchPad at isa0060/serio3/input0 lost sync at byte 4
[ 2390.805268] psmouse.c: TouchPad at isa0060/serio3/input0 lost sync at byte 1
[ 2390.807211] psmouse.c: TouchPad at isa0060/serio3/input0 lost sync at byte 1
[ 2390.809155] psmouse.c: TouchPad at isa0060/serio3/input0 lost sync at byte 1
[ 2390.822148] psmouse.c: TouchPad at isa0060/serio3/input0 - driver resynched.

benoitpar · Le 12/08/2008, à 04:07

Bonjour

Je suis sous Hardy heron version 64 bits, j'ai ajouté les dépots suivants dans les sources de logicielles :deb http://blognux.free.fr/ubuntu hardy main
deb-src http://blognux.free.fr/ubuntu hardy main

Comme indiqué sur la page http://doc.ubuntu-fr.org/easycam

Et ensuite si j'essaie de recharger dans Synaptic j'obtiens l'erreur suivante :
Impossible de récupérer http://blognux.free.fr/ubuntu/dists/hardy/main/binary-amd64/Packages.gz 404 Not Found Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.

Donc je ne peux pas installer le paquet easycam...

Merci,
Benoît

Anbreizh · Le 12/08/2008, à 04:52

Mon dépot n'est pas compatible 64Bits pour le moment. Regarde sur http://blognux.free.fr Rubrique Installation sur un systeme 64 bits

Anbreizh · Le 12/08/2008, à 06:58

Géo : Sans débrancher ta webcam !! Execute les commandes suivantes :

sudo modprobe -r ov511
sudo modprobe -r ov51x-jpeg
sudo modprobe ov51x-jpeg

géo · Le 12/08/2008, à 10:27

bonjour anbreizh,

après avoir exécuté tes commandes, je n'ai plus de mire vidéo dans easycam (plus rien).
ekiga ne se lance plus.....

Anbreizh · Le 12/08/2008, à 11:08

Et cette suite de commande :

sudo modprobe -r ov511
sudo modprobe -r ov51x-jpeg
sudo modprobe ov511

?

géo · Le 12/08/2008, à 11:48

sudo modprobe -r ov51x-jpeg
FATAL: Module ov51x_jpeg is in use.
????

géo · Le 12/08/2008, à 13:20

après avoir redémarrer l'ordi j'ai pu effectuer la suite de commande:
sudo modprobe -r ov511
sudo modprobe -r ov51x-jpeg
sudo modprobe ov511

j'ai de nouveau la mire vidéo sous easycam. ekiga se lance mais j'ai pas d'image.........

ubuntu_sk · Le 13/08/2008, à 14:45

Bon, voilà mon problème :

- ma caméra est une caméra intégrée dans mon ordinateur portable
- ma caméra est dans la liste des caméras supportés (0c45:627f Microdia)
- l'installation du driver via easycam se passe bien

mais :

- lorsque je lance un logiciel pour tester la caméra (cheese, camorama), je n'ai aucune image
- camorama me dit qu'il ne peut se connecter à /dev/video0
- je ne suis pas bête alors j'ai regardé dans mon /dev : je n'ai pas de /dev/video0 ou un quelconque video[qqch]

conclusion : help ! :'(

Dernière modification par ubuntu_sk (Le 13/08/2008, à 14:46)

Anbreizh · Le 13/08/2008, à 14:52

Peut tu me donner le résultat de la commande 'dmesg', avec ta webcam activé !

ubuntu_sk · Le 13/08/2008, à 15:01

euh étant donné que c'est une webcam intégrée, l'activer ou la désactiver me semble impossible, cependant elle est présente lors d'un lsusb, je pense donc qu'elle est activée dans le sens ou tu l'entends ?

sinon un dmesg me retourne un truc gigantesque :

[    0.000000] Detected 1862.021 MHz processor.
[   24.463815] Console: colour VGA+ 80x25
[   24.463818] console [tty0] enabled
[   24.464107] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   24.464460] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   24.579144] Memory: 2066816k/2096864k available (2177k kernel code, 28684k reserved, 1006k data, 368k init, 1179360k highmem)
[   24.579152] virtual kernel memory layout:
[   24.579153]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   24.579154]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   24.579156]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   24.579157]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   24.579158]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   24.579159]       .data : 0xc0320474 - 0xc041bdc4   (1006 kB)
[   24.579160]       .text : 0xc0100000 - 0xc0320474   (2177 kB)
[   24.579164] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   24.579205] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   24.579343] hpet clockevent registered
[   24.659210] Calibrating delay using timer specific routine.. 3727.60 BogoMIPS (lpj=7455217)
[   24.659234] Security Framework initialized
[   24.659242] SELinux:  Disabled at boot.
[   24.659256] AppArmor: AppArmor initialized
[   24.659260] Failure registering capabilities with primary security module.
[   24.659268] Mount-cache hash table entries: 512
[   24.659392] Initializing cgroup subsys ns
[   24.659399] Initializing cgroup subsys cpuacct
[   24.659409] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
[   24.659416] monitor/mwait feature present.
[   24.659418] using mwait in idle threads.
[   24.659422] CPU: L1 I cache: 32K, L1 D cache: 32K
[   24.659424] CPU: L2 cache: 2048K
[   24.659427] CPU: Physical Processor ID: 0
[   24.659429] CPU: Processor Core ID: 0
[   24.659431] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
[   24.659440] Compat vDSO mapped to ffffe000.
[   24.659453] Checking 'hlt' instruction... OK.
[   24.675562] SMP alternatives: switching to UP code
[   24.677254] Early unpacking initramfs... done
[   25.003626] ACPI: Core revision 20070126
[   25.003706] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   25.025411] CPU0: Intel(R) Core(TM) Duo CPU      T2350  @ 1.86GHz stepping 0c
[   25.025428] SMP alternatives: switching to SMP code
[   25.026087] Booting processor 1/1 eip 3000
[   25.036323] Initializing CPU#1
[   25.114417] Calibrating delay using timer specific routine.. 3724.06 BogoMIPS (lpj=7448120)
[   25.114425] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
[   25.114430] monitor/mwait feature present.
[   25.114433] CPU: L1 I cache: 32K, L1 D cache: 32K
[   25.114435] CPU: L2 cache: 2048K
[   25.114437] CPU: Physical Processor ID: 0
[   25.114438] CPU: Processor Core ID: 1
[   25.114440] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
[   25.115005] CPU1: Intel(R) Core(TM) Duo CPU      T2350  @ 1.86GHz stepping 0c
[   25.115026] Total of 2 processors activated (7451.66 BogoMIPS).
[   25.115197] ENABLING IO-APIC IRQs
[   25.115380] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   25.262279] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   25.282264] Brought up 2 CPUs
[   25.282289] CPU0 attaching sched-domain:
[   25.282292]  domain 0: span 03
[   25.282294]   groups: 01 02
[   25.282297] CPU1 attaching sched-domain:
[   25.282298]  domain 0: span 03
[   25.282300]   groups: 02 01
[   25.282544] net_namespace: 64 bytes
[   25.282554] Booting paravirtualized kernel on bare hardware
[   25.282984] Time: 12:19:18  Date: 08/13/08
[   25.283011] NET: Registered protocol family 16
[   25.283217] EISA bus registered
[   25.283222] ACPI: bus type pci registered
[   25.283468] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[   25.283470] PCI: Using configuration type 1
[   25.283488] Setting up standard PCI resources
[   25.288608] ACPI: EC: Look up EC in DSDT
[   25.575523] ACPI: Interpreter enabled
[   25.575526] ACPI: (supports S0 S1 S3 S4 S5)
[   25.575545] ACPI: Using IOAPIC for interrupt routing
[   25.586793] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[   25.586796] ACPI: EC: driver started in poll mode
[   25.586933] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   25.587632] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   25.587636] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   25.588804] PCI: Transparent bridge - 0000:00:1e.0
[   25.588848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   25.589028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[   25.589149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   25.589316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   25.589445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[   25.589576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[   25.603312] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[   25.603491] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 12)
[   25.603667] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 12)
[   25.603844] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 12)
[   25.604020] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[   25.604197] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[   25.604374] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[   25.604551] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 12)
[   25.604722] ACPI: Power Resource [GFAN] (off)
[   25.604764] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  90, should be 8E [20070126]
[   25.604771] Linux Plug and Play Support v0.97 (c) Adam Belay
[   25.604803] pnp: PnP ACPI init
[   25.604810] ACPI: bus type pnp registered
[   25.609631] pnp: PnP ACPI: found 16 devices
[   25.609634] ACPI: ACPI bus type pnp unregistered
[   25.609637] PnPBIOS: Disabled by ACPI PNP
[   25.609882] PCI: Using ACPI for IRQ routing
[   25.609885] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   25.649618] NET: Registered protocol family 8
[   25.649620] NET: Registered protocol family 20
[   25.649656] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   25.649660] hpet0: 3 64-bit timers, 14318180 Hz
[   25.650692] AppArmor: AppArmor Filesystem Enabled
[   25.653484] Time: tsc clocksource has been installed.
[   25.653499] Switched to high resolution mode on CPU 0
[   25.653607] Switched to high resolution mode on CPU 1
[   25.666459] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[   25.666469] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[   25.666472] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[   25.666475] system 00:0a: ioport range 0xa20-0xa2f has been reserved
[   25.666477] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[   25.666480] system 00:0a: ioport range 0xa40-0xa4f has been reserved
[   25.666485] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[   25.666488] system 00:0b: ioport range 0x800-0x87f has been reserved
[   25.666491] system 00:0b: ioport range 0x400-0x41f has been reserved
[   25.666493] system 00:0b: ioport range 0x480-0x4bf has been reserved
[   25.666496] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   25.666499] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
[   25.666502] system 00:0b: iomem range 0xfed45000-0xfed89fff has been reserved
[   25.666505] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved
[   25.666508] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
[   25.666514] system 00:0d: ioport range 0x250-0x253 has been reserved
[   25.666516] system 00:0d: ioport range 0x256-0x25f has been reserved
[   25.666519] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[   25.666522] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[   25.666525] system 00:0d: iomem range 0xfec10000-0xfec17fff has been reserved
[   25.666528] system 00:0d: iomem range 0xfec18000-0xfec1ffff has been reserved
[   25.666531] system 00:0d: iomem range 0xfec20000-0xfec27fff has been reserved
[   25.666536] system 00:0e: iomem range 0xe0000000-0xe3ffffff has been reserved
[   25.666542] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[   25.666545] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[   25.666548] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[   25.666551] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
[   25.666553] system 00:0f: iomem range 0x0-0x0 could not be reserved
[   25.696938] PCI: Bridge: 0000:00:01.0
[   25.696941]   IO window: b000-dfff
[   25.696945]   MEM window: fe000000-fe0fffff
[   25.696948]   PREFETCH window: bff00000-dfefffff
[   25.696951] PCI: Bridge: 0000:00:1c.0
[   25.696954]   IO window: a000-afff
[   25.696959]   MEM window: fdf00000-fdffffff
[   25.696963]   PREFETCH window: disabled.
[   25.696968] PCI: Bridge: 0000:00:1c.1
[   25.696970]   IO window: disabled.
[   25.696975]   MEM window: fde00000-fdefffff
[   25.696979]   PREFETCH window: disabled.
[   25.696984] PCI: Bridge: 0000:00:1c.2
[   25.696987]   IO window: 8000-9fff
[   25.696992]   MEM window: f9e00000-fddfffff
[   25.696996]   PREFETCH window: 9ff00000-bfefffff
[   25.697002] PCI: Bridge: 0000:00:1e.0
[   25.697003]   IO window: disabled.
[   25.697008]   MEM window: f9d00000-f9dfffff
[   25.697012]   PREFETCH window: disabled.
[   25.697030] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   25.697035] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   25.697056] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   25.697061] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   25.697083] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
[   25.697088] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   25.697109] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   25.697115] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   25.697127] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   25.697137] NET: Registered protocol family 2
[   25.734361] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   25.734570] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   25.735238] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   25.735567] TCP: Hash tables configured (established 131072 bind 65536)
[   25.735570] TCP reno registered
[   25.746435] checking if image is initramfs... it is
[   26.393604] Freeing initrd memory: 7303k freed
[   26.393770] Simple Boot Flag at 0x52 set to 0x1
[   26.394448] audit: initializing netlink socket (disabled)
[   26.394461] audit(1218629958.416:1): initialized
[   26.394690] highmem bounce pool size: 64 pages
[   26.396676] VFS: Disk quotas dquot_6.5.1
[   26.396748] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   26.396880] io scheduler noop registered
[   26.396882] io scheduler anticipatory registered
[   26.396884] io scheduler deadline registered
[   26.396895] io scheduler cfq registered (default)
[   26.396988] Boot video device is 0000:07:00.0
[   26.397103] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   26.397139] assign_interrupt_mode Found MSI capability
[   26.397170] Allocate Port Service[0000:00:01.0:pcie00]
[   26.397249] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   26.397299] assign_interrupt_mode Found MSI capability
[   26.397339] Allocate Port Service[0000:00:1c.0:pcie00]
[   26.397373] Allocate Port Service[0000:00:1c.0:pcie02]
[   26.397468] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   26.397517] assign_interrupt_mode Found MSI capability
[   26.397557] Allocate Port Service[0000:00:1c.1:pcie00]
[   26.397650] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   26.397700] assign_interrupt_mode Found MSI capability
[   26.397740] Allocate Port Service[0000:00:1c.2:pcie00]
[   26.397781] Allocate Port Service[0000:00:1c.2:pcie02]
[   26.398042] isapnp: Scanning for PnP cards...
[   26.751284] isapnp: No Plug & Play device found
[   26.778349] Real Time Clock Driver v1.12ac
[   26.778582] hpet_resources: 0xfed00000 is busy
[   26.778612] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   26.778706] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 8250
[   26.778850] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   26.779998] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   26.780067] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   26.780171] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   26.784536] i8042.c: Detected active multiplexing controller, rev 1.1.
[   26.787619] serio: i8042 KBD port at 0x60,0x64 irq 1
[   26.787623] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   26.787626] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   26.787628] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   26.787630] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   26.815488] mice: PS/2 mouse device common for all mice
[   26.815610] EISA: Probing bus 0 at eisa.0
[   26.815641] Cannot allocate resource for EISA slot 8
[   26.815643] EISA: Detected 0 cards.
[   26.815646] cpuidle: using governor ladder
[   26.815648] cpuidle: using governor menu
[   26.815730] NET: Registered protocol family 1
[   26.815758] Using IPI No-Shortcut mode
[   26.815787] registered taskstats version 1
[   26.815893]   Magic number: 4:531:329
[   26.815959]   hash matches device tty50
[   26.815985] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   26.815987] EDD information not available.
[   26.816185] Freeing unused kernel memory: 368k freed
[   26.849168] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   28.021615] fuse init (API version 7.9)
[   28.035315] ACPI: Transitioning device [FN00] to D3
[   28.035318] ACPI: Transitioning device [FN00] to D3
[   28.035321] ACPI: Fan [FN00] (off)
[   28.040547] ACPI: SSDT 7FFCE290, 0D19 (r1    AMI   CPU1PM        1 INTL  2002026)
[   28.041434] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   28.041438] ACPI: Processor [CPU1] (supports 8 throttling states)
[   28.041489] ACPI: SSDT 7FFCEFB0, 0D19 (r1    AMI   CPU2PM        1 INTL  2002026)
[   28.042331] ACPI: CPU1 (power states: C1[C1] C2[C2])
[   28.042336] ACPI: Processor [CPU2] (supports 8 throttling states)
[   28.043511] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   28.048506] ACPI: Thermal Zone [THRM] (61 C)
[   28.409823] r8169 Gigabit Ethernet driver 2.2LK loaded
[   28.409852] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   28.409873] PCI: Setting latency timer of device 0000:06:00.0 to 64
[   28.410201] eth0: RTL8168b/8111b at 0xf8854000, 00:1d:60:09:53:ec, XID 38000000 IRQ 219
[   28.459666] usbcore: registered new interface driver usbfs
[   28.459691] usbcore: registered new interface driver hub
[   28.459719] usbcore: registered new device driver usb
[   28.463396] USB Universal Host Controller Interface driver v3.0
[   28.463447] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[   28.463459] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   28.463463] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   28.463694] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   28.463726] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480
[   28.463852] usb usb1: configuration #1 chosen from 1 choice
[   28.463877] hub 1-0:1.0: USB hub found
[   28.463882] hub 1-0:1.0: 2 ports detected
[   28.540770] SCSI subsystem initialized
[   28.568459] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 20
[   28.568473] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   28.568478] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   28.568500] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   28.568533] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e800
[   28.568646] usb usb2: configuration #1 chosen from 1 choice
[   28.568669] hub 2-0:1.0: USB hub found
[   28.568674] hub 2-0:1.0: 2 ports detected
[   28.584240] libata version 3.00 loaded.
[   28.672245] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   28.672259] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   28.672263] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   28.672288] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   28.672320] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[   28.672427] usb usb3: configuration #1 chosen from 1 choice
[   28.672450] hub 3-0:1.0: USB hub found
[   28.672454] hub 3-0:1.0: 2 ports detected
[   28.776059] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   28.776072] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   28.776076] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   28.776102] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   28.776134] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[   28.776256] usb usb4: configuration #1 chosen from 1 choice
[   28.776278] hub 4-0:1.0: USB hub found
[   28.776283] hub 4-0:1.0: 2 ports detected
[   28.879931] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   28.880382] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[   28.880392] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   28.880396] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   28.880421] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   28.884313] ehci_hcd 0000:00:1d.7: debug port 1
[   28.884320] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   28.884326] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe1ffc00
[   28.932568] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[f9dfe800-f9dfefff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   28.936573] usb 2-2: new full speed USB device using uhci_hcd and address 2
[   28.947664] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   28.947793] usb usb5: configuration #1 chosen from 1 choice
[   28.947818] hub 5-0:1.0: USB hub found
[   28.947824] hub 5-0:1.0: 8 ports detected
[   29.050048] ata_piix 0000:00:1f.2: version 2.12
[   29.050056] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[   29.050089] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 20
[   29.050127] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   29.050203] scsi0 : ata_piix
[   29.050248] scsi1 : ata_piix
[   29.051301] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   29.051304] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   29.211729] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[   29.211739] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
[   29.228711] ata1.00: configured for UDMA/100
[   29.495711] usb 5-4: new high speed USB device using ehci_hcd and address 2
[   29.547054] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33
[   29.629163] usb 5-4: configuration #1 chosen from 1 choice
[   29.718691] ata2.00: configured for UDMA/33
[   29.718835] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[   29.722591] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PR03 PQ: 0 ANSI: 5
[   29.730573] Driver 'sd' needs updating - please use bus_type methods
[   29.730642] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   29.730655] sd 0:0:0:0: [sda] Write Protect is off
[   29.730657] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   29.730673] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   29.730723] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   29.730733] sd 0:0:0:0: [sda] Write Protect is off
[   29.730735] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   29.730751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   29.730755]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   30.137675]  sda1 sda2 sda3
[   30.137858] sd 0:0:0:0: [sda] Attached SCSI disk
[   30.142590] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   30.142608] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   30.156762] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   30.156767] Uniform CD-ROM driver Revision: 3.20
[   30.156815] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   30.213544] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180003a13b54]
[   30.237398] usb 3-2: new low speed USB device using uhci_hcd and address 2
[   30.336088] Attempting manual resume
[   30.336091] swsusp: Resume From Partition 8:1
[   30.336093] PM: Checking swsusp image.
[   30.336286] PM: Resume from disk failed.
[   30.382064] kjournald starting.  Commit interval 5 seconds
[   30.382089] EXT3-fs: mounted filesystem with ordered data mode.
[   30.415547] usb 3-2: configuration #1 chosen from 1 choice
[   30.656652] usb 4-2: new low speed USB device using uhci_hcd and address 2
[   30.825749] usb 4-2: configuration #1 chosen from 1 choice
[   39.034927] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   39.090793] iTCO_vendor_support: vendor-support=0
[   39.142704] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   39.142799] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[   39.142832] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   39.222513] Linux agpgart interface v0.102
[   39.390251] irda_init()
[   39.390268] NET: Registered protocol family 23
[   39.450130] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   39.504258] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   39.589983] input: Power Button (FF) as /devices/virtual/input/input3
[   39.641761] ACPI: Power Button (FF) [PWRF]
[   39.641861] input: Lid Switch as /devices/virtual/input/input4
[   39.676417] ACPI: Lid Switch [LID]
[   39.676482] input: Sleep Button (CM) as /devices/virtual/input/input5
[   39.704574] intel_rng: FWH not detected
[   39.733608] ACPI: Sleep Button (CM) [SLPB]
[   39.733668] input: Power Button (CM) as /devices/virtual/input/input6
[   39.797496] ACPI: Power Button (CM) [PWRB]
[   39.797532] asus-laptop: Asus Laptop Support version 0.42
[   39.797818] asus-laptop:   A7C model detected
[   39.801143] Registered led device: asus:phone
[   40.008703] ACPI: AC Adapter [AC0] (on-line)
[   40.232731] sdhci: Secure Digital Host Controller Interface driver
[   40.232736] sdhci: Copyright(c) Pierre Ossman
[   40.232786] sdhci: SDHCI controller found at 0000:01:01.1 [1180:0822] (rev 19)
[   40.232813] ACPI: PCI Interrupt 0000:01:01.1[b] -> GSI 17 (level, low) -> IRQ 17
[   40.232834] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   40.232886] mmc0: SDHCI at 0xf9dff400 irq 17 DMA
[   40.312443] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
[   40.375500] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   40.408398] ACPI: Battery Slot [BAT0] (battery present)
[   40.423082] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[   40.471309] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   40.778113] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   40.842632] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   40.843682] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[   40.843718] [fglrx] ASYNCIO init succeed!
[   40.844687] [fglrx] PAT is enabled successfully!
[   40.844707] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[   40.888573] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   40.998789] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[   40.998793] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[   40.998899] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   40.998914] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   40.998935] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   41.012829] usbcore: registered new interface driver hiddev
[   41.027265] Linux video capture interface: v2.00
[   41.041120] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input10
[   41.059280] input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:1d.2-2
[   41.072236] input: USB Mouse               as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input11
[   41.091875] microdia: Microdia USB2.0 webcam driver startup
[   41.091921] microdia: Camera 0C45:627F not supported.
[   41.126157] input,hidraw1: USB HID v1.10 Mouse [USB Mouse              ] on usb-0000:00:1d.3-2
[   41.126178] usbcore: registered new interface driver usbhid
[   41.126182] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   41.126214] usbcore: registered new interface driver usb_microdia_driver
[   41.126218] microdia: v0.0.0 : Microdia USB Video Camera
[   41.144703] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   41.144730] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   41.175863] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[   41.884414] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[   41.885238] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[   42.207100] lp: driver loaded but no devices found
[   42.329105] Adding 4000020k swap on /dev/sda1.  Priority:-1 extents:1 across:4000020k
[   42.872497] EXT3 FS on sda2, internal journal
[   43.631665] kjournald starting.  Commit interval 5 seconds
[   43.631942] EXT3 FS on sda3, internal journal
[   43.631953] EXT3-fs: mounted filesystem with ordered data mode.
[   44.141857] ip_tables: (C) 2000-2006 Netfilter Core Team
[   44.555747] No dock devices found.
[   45.831507] apm: BIOS not found.
[   46.047581] ppdev: user-space parallel port driver
[   46.194362] audit(1218629979.132:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5239 profile="/usr/sbin/cupsd" namespace="default"
[   47.616388] r8169: eth0: link up
[   47.616404] r8169: eth0: link up
[   49.956086] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   50.078074] Bluetooth: Core ver 2.11
[   50.078227] NET: Registered protocol family 31
[   50.078231] Bluetooth: HCI device and connection manager initialized
[   50.078239] Bluetooth: HCI socket layer initialized
[   50.170344] Bluetooth: L2CAP ver 2.9
[   50.170349] Bluetooth: L2CAP socket layer initialized
[   50.233027] Bluetooth: RFCOMM socket layer initialized
[   50.233041] Bluetooth: RFCOMM TTY layer initialized
[   50.233043] Bluetooth: RFCOMM ver 1.8
[   50.802422] NET: Registered protocol family 17
[   52.105912] [fglrx] Reserve Block - 0 offset =  0X7ffb000 length = 0X5000
[   52.105919] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[   52.105922] [fglrx] Reserve Block - 2 offset =  0X7fbb000 length = 0X40000
[   52.166561] [fglrx] interrupt source 10000000 successfully enabled
[   52.166573] [fglrx] enable ID = 0x00000008
[   52.166585] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[   52.616103] NET: Registered protocol family 10
[   52.616622] lo: Disabled Privacy Extensions
[   52.618632] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   62.999861] eth0: no IPv6 routers present
[   83.740882] CPU0 attaching NULL sched-domain.
[   83.740889] CPU1 attaching NULL sched-domain.
[   83.753540] CPU0 attaching sched-domain:
[   83.753549]  domain 0: span 03
[   83.753553]   groups: 01 02
[   83.753563] CPU1 attaching sched-domain:
[   83.753567]  domain 0: span 03
[   83.753572]   groups: 02 01

voila la chose, merci de ta rapidité

Anbreizh · Le 13/08/2008, à 16:55

Je ne trouve pas l'entrée qui m'interresse ....
Execute les commandes suivantes :

sudo modprobe -r microdia
sudo modprobe microdia

et retourne moi ton dmesg

Dernière modification par Anbreizh (Le 13/08/2008, à 16:57)

ubuntu_sk · Le 13/08/2008, à 20:17

euh les deux modprobe ne me retourne rien... c'est ptet normal je sais pas ce que tu en attendais...
j'ai ensuite refait dmesg, voici :

[   24.659429] CPU: Processor Core ID: 0
[   24.659431] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
[   24.659440] Compat vDSO mapped to ffffe000.
[   24.659453] Checking 'hlt' instruction... OK.
[   24.675562] SMP alternatives: switching to UP code
[   24.677254] Early unpacking initramfs... done
[   25.003626] ACPI: Core revision 20070126
[   25.003706] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   25.025411] CPU0: Intel(R) Core(TM) Duo CPU      T2350  @ 1.86GHz stepping 0c
[   25.025428] SMP alternatives: switching to SMP code
[   25.026087] Booting processor 1/1 eip 3000
[   25.036323] Initializing CPU#1
[   25.114417] Calibrating delay using timer specific routine.. 3724.06 BogoMIPS (lpj=7448120)
[   25.114425] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
[   25.114430] monitor/mwait feature present.
[   25.114433] CPU: L1 I cache: 32K, L1 D cache: 32K
[   25.114435] CPU: L2 cache: 2048K
[   25.114437] CPU: Physical Processor ID: 0
[   25.114438] CPU: Processor Core ID: 1
[   25.114440] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
[   25.115005] CPU1: Intel(R) Core(TM) Duo CPU      T2350  @ 1.86GHz stepping 0c
[   25.115026] Total of 2 processors activated (7451.66 BogoMIPS).
[   25.115197] ENABLING IO-APIC IRQs
[   25.115380] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   25.262279] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   25.282264] Brought up 2 CPUs
[   25.282289] CPU0 attaching sched-domain:
[   25.282292]  domain 0: span 03
[   25.282294]   groups: 01 02
[   25.282297] CPU1 attaching sched-domain:
[   25.282298]  domain 0: span 03
[   25.282300]   groups: 02 01
[   25.282544] net_namespace: 64 bytes
[   25.282554] Booting paravirtualized kernel on bare hardware
[   25.282984] Time: 12:19:18  Date: 08/13/08
[   25.283011] NET: Registered protocol family 16
[   25.283217] EISA bus registered
[   25.283222] ACPI: bus type pci registered
[   25.283468] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[   25.283470] PCI: Using configuration type 1
[   25.283488] Setting up standard PCI resources
[   25.288608] ACPI: EC: Look up EC in DSDT
[   25.575523] ACPI: Interpreter enabled
[   25.575526] ACPI: (supports S0 S1 S3 S4 S5)
[   25.575545] ACPI: Using IOAPIC for interrupt routing
[   25.586793] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[   25.586796] ACPI: EC: driver started in poll mode
[   25.586933] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   25.587632] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   25.587636] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   25.588804] PCI: Transparent bridge - 0000:00:1e.0
[   25.588848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   25.589028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[   25.589149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   25.589316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   25.589445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[   25.589576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[   25.603312] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[   25.603491] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 12)
[   25.603667] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 12)
[   25.603844] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 12)
[   25.604020] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[   25.604197] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[   25.604374] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[   25.604551] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 12)
[   25.604722] ACPI: Power Resource [GFAN] (off)
[   25.604764] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  90, should be 8E [20070126]
[   25.604771] Linux Plug and Play Support v0.97 (c) Adam Belay
[   25.604803] pnp: PnP ACPI init
[   25.604810] ACPI: bus type pnp registered
[   25.609631] pnp: PnP ACPI: found 16 devices
[   25.609634] ACPI: ACPI bus type pnp unregistered
[   25.609637] PnPBIOS: Disabled by ACPI PNP
[   25.609882] PCI: Using ACPI for IRQ routing
[   25.609885] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   25.649618] NET: Registered protocol family 8
[   25.649620] NET: Registered protocol family 20
[   25.649656] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   25.649660] hpet0: 3 64-bit timers, 14318180 Hz
[   25.650692] AppArmor: AppArmor Filesystem Enabled
[   25.653484] Time: tsc clocksource has been installed.
[   25.653499] Switched to high resolution mode on CPU 0
[   25.653607] Switched to high resolution mode on CPU 1
[   25.666459] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[   25.666469] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[   25.666472] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[   25.666475] system 00:0a: ioport range 0xa20-0xa2f has been reserved
[   25.666477] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[   25.666480] system 00:0a: ioport range 0xa40-0xa4f has been reserved
[   25.666485] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[   25.666488] system 00:0b: ioport range 0x800-0x87f has been reserved
[   25.666491] system 00:0b: ioport range 0x400-0x41f has been reserved
[   25.666493] system 00:0b: ioport range 0x480-0x4bf has been reserved
[   25.666496] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   25.666499] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
[   25.666502] system 00:0b: iomem range 0xfed45000-0xfed89fff has been reserved
[   25.666505] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved
[   25.666508] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
[   25.666514] system 00:0d: ioport range 0x250-0x253 has been reserved
[   25.666516] system 00:0d: ioport range 0x256-0x25f has been reserved
[   25.666519] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[   25.666522] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[   25.666525] system 00:0d: iomem range 0xfec10000-0xfec17fff has been reserved
[   25.666528] system 00:0d: iomem range 0xfec18000-0xfec1ffff has been reserved
[   25.666531] system 00:0d: iomem range 0xfec20000-0xfec27fff has been reserved
[   25.666536] system 00:0e: iomem range 0xe0000000-0xe3ffffff has been reserved
[   25.666542] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[   25.666545] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[   25.666548] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[   25.666551] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
[   25.666553] system 00:0f: iomem range 0x0-0x0 could not be reserved
[   25.696938] PCI: Bridge: 0000:00:01.0
[   25.696941]   IO window: b000-dfff
[   25.696945]   MEM window: fe000000-fe0fffff
[   25.696948]   PREFETCH window: bff00000-dfefffff
[   25.696951] PCI: Bridge: 0000:00:1c.0
[   25.696954]   IO window: a000-afff
[   25.696959]   MEM window: fdf00000-fdffffff
[   25.696963]   PREFETCH window: disabled.
[   25.696968] PCI: Bridge: 0000:00:1c.1
[   25.696970]   IO window: disabled.
[   25.696975]   MEM window: fde00000-fdefffff
[   25.696979]   PREFETCH window: disabled.
[   25.696984] PCI: Bridge: 0000:00:1c.2
[   25.696987]   IO window: 8000-9fff
[   25.696992]   MEM window: f9e00000-fddfffff
[   25.696996]   PREFETCH window: 9ff00000-bfefffff
[   25.697002] PCI: Bridge: 0000:00:1e.0
[   25.697003]   IO window: disabled.
[   25.697008]   MEM window: f9d00000-f9dfffff
[   25.697012]   PREFETCH window: disabled.
[   25.697030] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   25.697035] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   25.697056] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   25.697061] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   25.697083] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
[   25.697088] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   25.697109] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   25.697115] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   25.697127] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   25.697137] NET: Registered protocol family 2
[   25.734361] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   25.734570] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   25.735238] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   25.735567] TCP: Hash tables configured (established 131072 bind 65536)
[   25.735570] TCP reno registered
[   25.746435] checking if image is initramfs... it is
[   26.393604] Freeing initrd memory: 7303k freed
[   26.393770] Simple Boot Flag at 0x52 set to 0x1
[   26.394448] audit: initializing netlink socket (disabled)
[   26.394461] audit(1218629958.416:1): initialized
[   26.394690] highmem bounce pool size: 64 pages
[   26.396676] VFS: Disk quotas dquot_6.5.1
[   26.396748] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   26.396880] io scheduler noop registered
[   26.396882] io scheduler anticipatory registered
[   26.396884] io scheduler deadline registered
[   26.396895] io scheduler cfq registered (default)
[   26.396988] Boot video device is 0000:07:00.0
[   26.397103] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   26.397139] assign_interrupt_mode Found MSI capability
[   26.397170] Allocate Port Service[0000:00:01.0:pcie00]
[   26.397249] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   26.397299] assign_interrupt_mode Found MSI capability
[   26.397339] Allocate Port Service[0000:00:1c.0:pcie00]
[   26.397373] Allocate Port Service[0000:00:1c.0:pcie02]
[   26.397468] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   26.397517] assign_interrupt_mode Found MSI capability
[   26.397557] Allocate Port Service[0000:00:1c.1:pcie00]
[   26.397650] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   26.397700] assign_interrupt_mode Found MSI capability
[   26.397740] Allocate Port Service[0000:00:1c.2:pcie00]
[   26.397781] Allocate Port Service[0000:00:1c.2:pcie02]
[   26.398042] isapnp: Scanning for PnP cards...
[   26.751284] isapnp: No Plug & Play device found
[   26.778349] Real Time Clock Driver v1.12ac
[   26.778582] hpet_resources: 0xfed00000 is busy
[   26.778612] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   26.778706] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 8250
[   26.778850] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   26.779998] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   26.780067] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   26.780171] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   26.784536] i8042.c: Detected active multiplexing controller, rev 1.1.
[   26.787619] serio: i8042 KBD port at 0x60,0x64 irq 1
[   26.787623] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   26.787626] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   26.787628] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   26.787630] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   26.815488] mice: PS/2 mouse device common for all mice
[   26.815610] EISA: Probing bus 0 at eisa.0
[   26.815641] Cannot allocate resource for EISA slot 8
[   26.815643] EISA: Detected 0 cards.
[   26.815646] cpuidle: using governor ladder
[   26.815648] cpuidle: using governor menu
[   26.815730] NET: Registered protocol family 1
[   26.815758] Using IPI No-Shortcut mode
[   26.815787] registered taskstats version 1
[   26.815893]   Magic number: 4:531:329
[   26.815959]   hash matches device tty50
[   26.815985] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   26.815987] EDD information not available.
[   26.816185] Freeing unused kernel memory: 368k freed
[   26.849168] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   28.021615] fuse init (API version 7.9)
[   28.035315] ACPI: Transitioning device [FN00] to D3
[   28.035318] ACPI: Transitioning device [FN00] to D3
[   28.035321] ACPI: Fan [FN00] (off)
[   28.040547] ACPI: SSDT 7FFCE290, 0D19 (r1    AMI   CPU1PM        1 INTL  2002026)
[   28.041434] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   28.041438] ACPI: Processor [CPU1] (supports 8 throttling states)
[   28.041489] ACPI: SSDT 7FFCEFB0, 0D19 (r1    AMI   CPU2PM        1 INTL  2002026)
[   28.042331] ACPI: CPU1 (power states: C1[C1] C2[C2])
[   28.042336] ACPI: Processor [CPU2] (supports 8 throttling states)
[   28.043511] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   28.048506] ACPI: Thermal Zone [THRM] (61 C)
[   28.409823] r8169 Gigabit Ethernet driver 2.2LK loaded
[   28.409852] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   28.409873] PCI: Setting latency timer of device 0000:06:00.0 to 64
[   28.410201] eth0: RTL8168b/8111b at 0xf8854000, 00:1d:60:09:53:ec, XID 38000000 IRQ 219
[   28.459666] usbcore: registered new interface driver usbfs
[   28.459691] usbcore: registered new interface driver hub
[   28.459719] usbcore: registered new device driver usb
[   28.463396] USB Universal Host Controller Interface driver v3.0
[   28.463447] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[   28.463459] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   28.463463] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   28.463694] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   28.463726] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480
[   28.463852] usb usb1: configuration #1 chosen from 1 choice
[   28.463877] hub 1-0:1.0: USB hub found
[   28.463882] hub 1-0:1.0: 2 ports detected
[   28.540770] SCSI subsystem initialized
[   28.568459] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 20
[   28.568473] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   28.568478] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   28.568500] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   28.568533] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e800
[   28.568646] usb usb2: configuration #1 chosen from 1 choice
[   28.568669] hub 2-0:1.0: USB hub found
[   28.568674] hub 2-0:1.0: 2 ports detected
[   28.584240] libata version 3.00 loaded.
[   28.672245] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   28.672259] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   28.672263] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   28.672288] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   28.672320] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[   28.672427] usb usb3: configuration #1 chosen from 1 choice
[   28.672450] hub 3-0:1.0: USB hub found
[   28.672454] hub 3-0:1.0: 2 ports detected
[   28.776059] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   28.776072] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   28.776076] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   28.776102] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   28.776134] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[   28.776256] usb usb4: configuration #1 chosen from 1 choice
[   28.776278] hub 4-0:1.0: USB hub found
[   28.776283] hub 4-0:1.0: 2 ports detected
[   28.879931] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   28.880382] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[   28.880392] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   28.880396] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   28.880421] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   28.884313] ehci_hcd 0000:00:1d.7: debug port 1
[   28.884320] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   28.884326] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe1ffc00
[   28.932568] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[f9dfe800-f9dfefff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   28.936573] usb 2-2: new full speed USB device using uhci_hcd and address 2
[   28.947664] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   28.947793] usb usb5: configuration #1 chosen from 1 choice
[   28.947818] hub 5-0:1.0: USB hub found
[   28.947824] hub 5-0:1.0: 8 ports detected
[   29.050048] ata_piix 0000:00:1f.2: version 2.12
[   29.050056] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[   29.050089] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 20
[   29.050127] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   29.050203] scsi0 : ata_piix
[   29.050248] scsi1 : ata_piix
[   29.051301] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   29.051304] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   29.211729] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[   29.211739] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
[   29.228711] ata1.00: configured for UDMA/100
[   29.495711] usb 5-4: new high speed USB device using ehci_hcd and address 2
[   29.547054] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33
[   29.629163] usb 5-4: configuration #1 chosen from 1 choice
[   29.718691] ata2.00: configured for UDMA/33
[   29.718835] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[   29.722591] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PR03 PQ: 0 ANSI: 5
[   29.730573] Driver 'sd' needs updating - please use bus_type methods
[   29.730642] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   29.730655] sd 0:0:0:0: [sda] Write Protect is off
[   29.730657] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   29.730673] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   29.730723] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   29.730733] sd 0:0:0:0: [sda] Write Protect is off
[   29.730735] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   29.730751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   29.730755]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   30.137675]  sda1 sda2 sda3
[   30.137858] sd 0:0:0:0: [sda] Attached SCSI disk
[   30.142590] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   30.142608] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   30.156762] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   30.156767] Uniform CD-ROM driver Revision: 3.20
[   30.156815] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   30.213544] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180003a13b54]
[   30.237398] usb 3-2: new low speed USB device using uhci_hcd and address 2
[   30.336088] Attempting manual resume
[   30.336091] swsusp: Resume From Partition 8:1
[   30.336093] PM: Checking swsusp image.
[   30.336286] PM: Resume from disk failed.
[   30.382064] kjournald starting.  Commit interval 5 seconds
[   30.382089] EXT3-fs: mounted filesystem with ordered data mode.
[   30.415547] usb 3-2: configuration #1 chosen from 1 choice
[   30.656652] usb 4-2: new low speed USB device using uhci_hcd and address 2
[   30.825749] usb 4-2: configuration #1 chosen from 1 choice
[   39.034927] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   39.090793] iTCO_vendor_support: vendor-support=0
[   39.142704] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   39.142799] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[   39.142832] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   39.222513] Linux agpgart interface v0.102
[   39.390251] irda_init()
[   39.390268] NET: Registered protocol family 23
[   39.450130] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   39.504258] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   39.589983] input: Power Button (FF) as /devices/virtual/input/input3
[   39.641761] ACPI: Power Button (FF) [PWRF]
[   39.641861] input: Lid Switch as /devices/virtual/input/input4
[   39.676417] ACPI: Lid Switch [LID]
[   39.676482] input: Sleep Button (CM) as /devices/virtual/input/input5
[   39.704574] intel_rng: FWH not detected
[   39.733608] ACPI: Sleep Button (CM) [SLPB]
[   39.733668] input: Power Button (CM) as /devices/virtual/input/input6
[   39.797496] ACPI: Power Button (CM) [PWRB]
[   39.797532] asus-laptop: Asus Laptop Support version 0.42
[   39.797818] asus-laptop:   A7C model detected
[   39.801143] Registered led device: asus:phone
[   40.008703] ACPI: AC Adapter [AC0] (on-line)
[   40.232731] sdhci: Secure Digital Host Controller Interface driver
[   40.232736] sdhci: Copyright(c) Pierre Ossman
[   40.232786] sdhci: SDHCI controller found at 0000:01:01.1 [1180:0822] (rev 19)
[   40.232813] ACPI: PCI Interrupt 0000:01:01.1[b] -> GSI 17 (level, low) -> IRQ 17
[   40.232834] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   40.232886] mmc0: SDHCI at 0xf9dff400 irq 17 DMA
[   40.312443] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
[   40.375500] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   40.408398] ACPI: Battery Slot [BAT0] (battery present)
[   40.423082] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[   40.471309] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   40.778113] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   40.842632] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   40.843682] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[   40.843718] [fglrx] ASYNCIO init succeed!
[   40.844687] [fglrx] PAT is enabled successfully!
[   40.844707] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[   40.888573] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   40.998789] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[   40.998793] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[   40.998899] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   40.998914] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   40.998935] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   41.012829] usbcore: registered new interface driver hiddev
[   41.027265] Linux video capture interface: v2.00
[   41.041120] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input10
[   41.059280] input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:1d.2-2
[   41.072236] input: USB Mouse               as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input11
[   41.091875] microdia: Microdia USB2.0 webcam driver startup
[   41.091921] microdia: Camera 0C45:627F not supported.
[   41.126157] input,hidraw1: USB HID v1.10 Mouse [USB Mouse              ] on usb-0000:00:1d.3-2
[   41.126178] usbcore: registered new interface driver usbhid
[   41.126182] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   41.126214] usbcore: registered new interface driver usb_microdia_driver
[   41.126218] microdia: v0.0.0 : Microdia USB Video Camera
[   41.144703] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   41.144730] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   41.175863] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[   41.884414] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[   41.885238] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[   42.207100] lp: driver loaded but no devices found
[   42.329105] Adding 4000020k swap on /dev/sda1.  Priority:-1 extents:1 across:4000020k
[   42.872497] EXT3 FS on sda2, internal journal
[   43.631665] kjournald starting.  Commit interval 5 seconds
[   43.631942] EXT3 FS on sda3, internal journal
[   43.631953] EXT3-fs: mounted filesystem with ordered data mode.
[   44.141857] ip_tables: (C) 2000-2006 Netfilter Core Team
[   44.555747] No dock devices found.
[   45.831507] apm: BIOS not found.
[   46.047581] ppdev: user-space parallel port driver
[   46.194362] audit(1218629979.132:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5239 profile="/usr/sbin/cupsd" namespace="default"
[   47.616388] r8169: eth0: link up
[   47.616404] r8169: eth0: link up
[   49.956086] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   50.078074] Bluetooth: Core ver 2.11
[   50.078227] NET: Registered protocol family 31
[   50.078231] Bluetooth: HCI device and connection manager initialized
[   50.078239] Bluetooth: HCI socket layer initialized
[   50.170344] Bluetooth: L2CAP ver 2.9
[   50.170349] Bluetooth: L2CAP socket layer initialized
[   50.233027] Bluetooth: RFCOMM socket layer initialized
[   50.233041] Bluetooth: RFCOMM TTY layer initialized
[   50.233043] Bluetooth: RFCOMM ver 1.8
[   50.802422] NET: Registered protocol family 17
[   52.105912] [fglrx] Reserve Block - 0 offset =  0X7ffb000 length = 0X5000
[   52.105919] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[   52.105922] [fglrx] Reserve Block - 2 offset =  0X7fbb000 length = 0X40000
[   52.166561] [fglrx] interrupt source 10000000 successfully enabled
[   52.166573] [fglrx] enable ID = 0x00000008
[   52.166585] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[   52.616103] NET: Registered protocol family 10
[   52.616622] lo: Disabled Privacy Extensions
[   52.618632] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   62.999861] eth0: no IPv6 routers present
[   83.740882] CPU0 attaching NULL sched-domain.
[   83.740889] CPU1 attaching NULL sched-domain.
[   83.753540] CPU0 attaching sched-domain:
[   83.753549]  domain 0: span 03
[   83.753553]   groups: 01 02
[   83.753563] CPU1 attaching sched-domain:
[   83.753567]  domain 0: span 03
[   83.753572]   groups: 02 01
[21221.094296] r8169: eth0: link up
[21331.176045] microdia: usb_microdia_exit: Microdia USB2.0 webcam driver shutdown
[21331.176070] usbcore: deregistering interface driver usb_microdia_driver
[21338.726514] Linux video capture interface: v2.00
[21338.730478] microdia: Microdia USB2.0 webcam driver startup
[21338.730522] microdia: Camera 0C45:627F not supported.
[21338.730541] usbcore: registered new interface driver usb_microdia_driver
[21338.730545] microdia: v0.0.0 : Microdia USB Video Camera

j'espère que tu pourra m'aider, merci en tout cas ^^

Dernière modification par ubuntu_sk (Le 13/08/2008, à 20:19)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#2251 Le 11/08/2008, à 11:52

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2252 Le 11/08/2008, à 12:32

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2253 Le 11/08/2008, à 12:32

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2254 Le 11/08/2008, à 12:37

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2255 Le 11/08/2008, à 12:57

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2256 Le 11/08/2008, à 13:26

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2257 Le 11/08/2008, à 13:33

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2258 Le 11/08/2008, à 13:47

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2259 Le 11/08/2008, à 13:52

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2260 Le 11/08/2008, à 16:03

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2261 Le 11/08/2008, à 16:58

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2262 Le 11/08/2008, à 19:15

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2263 Le 11/08/2008, à 22:45

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2264 Le 12/08/2008, à 04:07

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2265 Le 12/08/2008, à 04:52

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2266 Le 12/08/2008, à 06:58

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2267 Le 12/08/2008, à 10:27

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2268 Le 12/08/2008, à 11:08

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2269 Le 12/08/2008, à 11:48

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2270 Le 12/08/2008, à 13:20

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2271 Le 13/08/2008, à 14:45

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2272 Le 13/08/2008, à 14:52

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2273 Le 13/08/2008, à 15:01

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2274 Le 13/08/2008, à 16:55

Re : [Clos] Centralisation Probleme Webcam+EasyCam

#2275 Le 13/08/2008, à 20:17

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Pied de page des forums