#2276 Le 15/08/2008, à 01:04
- pitpitou
Re : [Clos] Centralisation Probleme Webcam+EasyCam
bonjour
j'arrive à faire fonctionner la webcam... sous certains logiciels : amsn : bien. sous gaim et kopete apparamment pas; sous pidgin images superposées, illisible.
Par contre sous amsn où celà marche, je n'arrive plus à me connecter !!??
La connexion mouline, mouline mais ne se fait pas. Dans "préférences" lorsque je teste la connexion, on me répond "vous êtes derrière un pare-feu ou un routeur".
Je suis allé dans "firestarter" pour arrêter le pare-feu mais sans succès.
Quelqu'un peut-il m'aider ?? en me répondant par mail car j'ai beaucoup de mal à retrouver les réponses à mes questions dans les forums : pitpitou@wanadoo.fr.
Merci d'avance
Nous ne trouvons guère de gens de bon sens que ceux qui sont de notre avis. François de La Rochefoucauld, 1613-1680
Hors ligne
#2277 Le 15/08/2008, à 01:38
- yurek
Re : [Clos] Centralisation Probleme Webcam+EasyCam
amsn ne peut plus se connecter sur les serveur de bill car le protocole a changer, il faut patienter une mise a jour.
http://doc.ubuntu-fr.org/installation/debutants
http://doc.ubuntu-fr.org/diagnostic
http://doc.ubuntu-fr.org/diagnostic_outils
http://doc.ubuntu-fr.org/reflexe_ubunteros
Hors ligne
#2278 Le 15/08/2008, à 01:42
- yurek
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Ah ben en parlant du loup ! Une mise a jour est proposé a l'heure ou je poste ce message.
http://doc.ubuntu-fr.org/installation/debutants
http://doc.ubuntu-fr.org/diagnostic
http://doc.ubuntu-fr.org/diagnostic_outils
http://doc.ubuntu-fr.org/reflexe_ubunteros
Hors ligne
#2279 Le 15/08/2008, à 15:03
- ubuntu_sk
Re : [Clos] Centralisation Probleme Webcam+EasyCam
up
please... :'(
Hors ligne
#2280 Le 16/08/2008, à 00:10
- pitpitou
Re : [Clos] Centralisation Probleme Webcam+EasyCam
j'ai suivi le conseil de ambreizh avec la commande : gksudo 'python /usr/share/EasyCam2/core.py -i quickcam'.
[doc][/doc][doc][/doc]
elle m'en a mis des pages :
pierre@margot:~$ gksudo 'python /usr/share/EasyCam2/core.py -i quickcam'
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
linux-headers-2.6.24-19-386 est déjà la plus récente version disponible.
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libpurple0 libotr2 libsilc-1.1-2 libdns32 pidgin-data libhesiod0
libmeanwhile1 libzephyr3
Veuillez utiliser « apt-get autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
rm -f *.o qcset input_read show *~ .\#* .*.cmd *.mod.c *.ko
rm -rf .tmp_versions
cd testquickcam ; make clean
make[1]: entrant dans le répertoire « /usr/share/EasyCam2/drivers/quickcam/testquickcam »
rm testquickcam -f
make[1]: quittant le répertoire « /usr/share/EasyCam2/drivers/quickcam/testquickcam »
make -C "/lib/modules/2.6.24-19-386/build" SUBDIRS="/usr/share/EasyCam2/drivers/quickcam" modules V=1 USER_OPT="-DHAVE_UTSRELEASE_H=1"
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.24-19-386 »
test -e include/linux/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/linux/autoconf.h or include/config/auto.conf are missing."; \
echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo; \
/bin/false)
mkdir -p /usr/share/EasyCam2/drivers/quickcam/.tmp_versions ; rm -f /usr/share/EasyCam2/drivers/quickcam/.tmp_versions/*
make -f scripts/Makefile.build obj=/usr/share/EasyCam2/drivers/quickcam
gcc -m32 -Wp,-MD,/usr/share/EasyCam2/drivers/quickcam/.qc-driver.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.2.3/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march=i486 -mtune=generic -ffreestanding -maccumulate-outgoing-args -Iinclude/asm-x86/mach-default -fomit-frame-pointer -g -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1 -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_driver)" -D"KBUILD_MODNAME=KBUILD_STR(qcmessenger)" -c -o /usr/share/EasyCam2/drivers/quickcam/.tmp_qc-driver.o /usr/share/EasyCam2/drivers/quickcam/qc-driver.c
gcc -m32 -Wp,-MD,/usr/share/EasyCam2/drivers/quickcam/.qc-vv6450.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.2.3/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march=i486 -mtune=generic -ffreestanding -maccumulate-outgoing-args -Iinclude/asm-x86/mach-default -fomit-frame-pointer -g -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1 -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_vv6450)" -D"KBUILD_MODNAME=KBUILD_STR(qcmessenger)" -c -o /usr/share/EasyCam2/drivers/quickcam/.tmp_qc-vv6450.o /usr/share/EasyCam2/drivers/quickcam/qc-vv6450.c
gcc -m32 -Wp,-MD,/usr/share/EasyCam2/drivers/quickcam/.qc-formats.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.2.3/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march=i486 -mtune=generic -ffreestanding -maccumulate-outgoing-args -Iinclude/asm-x86/mach-default -fomit-frame-pointer -g -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1 -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_formats)" -D"KBUILD_MODNAME=KBUILD_STR(qcmessenger)" -c -o /usr/share/EasyCam2/drivers/quickcam/.tmp_qc-formats.o /usr/share/EasyCam2/drivers/quickcam/qc-formats.c
gcc -m32 -Wp,-MD,/usr/share/EasyCam2/drivers/quickcam/.qc-memory.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.2.3/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march=i486 -mtune=generic -ffreestanding -maccumulate-outgoing-args -Iinclude/asm-x86/mach-default -fomit-frame-pointer -g -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DNOKERNEL -DHAVE_UTSRELEASE_H=1 -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qc_memory)" -D"KBUILD_MODNAME=KBUILD_STR(qcmessenger)" -c -o /usr/share/EasyCam2/drivers/quickcam/.tmp_qc-memory.o /usr/share/EasyCam2/drivers/quickcam/qc-memory.c
ld -m elf_i386 -m elf_i386 -r -o /usr/share/EasyCam2/drivers/quickcam/qcmessenger.o /usr/share/EasyCam2/drivers/quickcam/qc-driver.o /usr/share/EasyCam2/drivers/quickcam/qc-vv6450.o /usr/share/EasyCam2/drivers/quickcam/qc-formats.o /usr/share/EasyCam2/drivers/quickcam/qc-memory.o
Building modules, stage 2.
make -f /usr/src/linux-headers-2.6.24-19-386/scripts/Makefile.modpost
scripts/mod/modpost -m -a -i /usr/src/linux-headers-2.6.24-19-386/Module.symvers -I /usr/share/EasyCam2/drivers/quickcam/Module.symvers -o /usr/share/EasyCam2/drivers/quickcam/Module.symvers -w -s
gcc -m32 -Wp,-MD,/usr/share/EasyCam2/drivers/quickcam/.qcmessenger.mod.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.2.3/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march=i486 -mtune=generic -ffreestanding -maccumulate-outgoing-args -Iinclude/asm-x86/mach-default -fomit-frame-pointer -g -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(qcmessenger.mod)" -D"KBUILD_MODNAME=KBUILD_STR(qcmessenger)" -DMODULE -c -o /usr/share/EasyCam2/drivers/quickcam/qcmessenger.mod.o /usr/share/EasyCam2/drivers/quickcam/qcmessenger.mod.c
ld -m elf_i386 -r -m elf_i386 --build-id -o /usr/share/EasyCam2/drivers/quickcam/qcmessenger.ko /usr/share/EasyCam2/drivers/quickcam/qcmessenger.o /usr/share/EasyCam2/drivers/quickcam/qcmessenger.mod.o
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.24-19-386 »
gcc -Wall -O2 -s qcset.c -o qcset -lm
gcc -Wall -O2 -s input_read.c -o input_read
/usr/bin/install -c -D -m 644 qcmessenger.ko /lib/modules/2.6.24-19-386/misc/qcmessenger.ko
/usr/bin/install -c -D -m 755 qcset /usr/local/bin/qcset
/sbin/depmod -a
qcset: �ation d'un lien symbolique `/lib/modules/2.6.24-19-386/build/include/linux/config.h': Le fichier existe
ioctl VIDIOCGCHAN (Invalid argument).
... mais je ne sais pas si ça veut dire que ça va marcher ??? Je vais essayer.
Merci
Pitpitou.
Nous ne trouvons guère de gens de bon sens que ceux qui sont de notre avis. François de La Rochefoucauld, 1613-1680
Hors ligne
#2281 Le 16/08/2008, à 00:23
- pitpitou
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Suite à mon message du 15 à 01h04... j'ai vraiment un bug avec amsn.
J'ai dû le désinstaller avec beaucoup de mal. pendant la désinstallation, le bug m'a été confirmé par écrit. Mais je n'ai pas pu envoyer le message d'erreur : réponse : "vérifier votre connexion internet". Or ma connexion marche très bien.
Après réinstallation complète, tjs le même problème.
amsn mouline, mouline mais ne se connecte pas.
Quand je fais le test dans "préférences", réponse : "vous êtes derrière un pare-feu ou un routeur.
Dans "autres", la configuration cam, j'obtiens maintenant un écran noir, alors que la diode témoin de la cam est allumée.
Que faire ??
Pitpitou
Nous ne trouvons guère de gens de bon sens que ceux qui sont de notre avis. François de La Rochefoucauld, 1613-1680
Hors ligne
#2282 Le 16/08/2008, à 01:09
- yurek
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Le bug de amsn est corrigé, il faut juste penser a mettre a jour.
http://doc.ubuntu-fr.org/installation/debutants
http://doc.ubuntu-fr.org/diagnostic
http://doc.ubuntu-fr.org/diagnostic_outils
http://doc.ubuntu-fr.org/reflexe_ubunteros
Hors ligne
#2283 Le 17/08/2008, à 11:29
- ysuire
Re : [Clos] Centralisation Probleme Webcam+EasyCam
J'ai une Philips SPC620NC, bien repérée par le logiciel, mais au test, aucune image ...
- PC Packard Bell ENTG71BM, Ubuntu 23.10 64 bits, Carte graphique Mesa Intel® HD Graphics (BYT), Processeur Intel® Celeron(R) CPU N2940 @ 1.83GHz×4, 4 Go RAM
Hors ligne
#2284 Le 17/08/2008, à 15:21
- freechelmi
Re : [Clos] Centralisation Probleme Webcam+EasyCam
pitpitou a écrit :
Quand je fais le test dans "préférences", réponse : "vous êtes derrière un pare-feu ou un routeur.
Dans "autres", la configuration cam, j'obtiens maintenant un écran noir, alors que la diode témoin de la cam est allumée.
Que faire ??
Pitpitou
Salut , désolé mais ton message concerne plutot un problème avec le réseau MSN et donc n'est pas vraiment bien placé dans ce fil de discussion centré sur les problèmes de Webcam.
Confirme qu'en testant un appel vers 500 avec Ekiga, ça fontionne.
Hors ligne
#2285 Le 18/08/2008, à 13:18
- ubuntu_sk
Re : [Clos] Centralisation Probleme Webcam+EasyCam
J'ai tjs mon petit problème, qqn pour m'aider ?
nb : mise à jour effectuée, tentative de réinstallation : rien de neuf :'(
Hors ligne
#2286 Le 18/08/2008, à 13:33
- Anbreizh
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Excuse, j'ai pas mal de message en parralèle, j'en oublie de temps en temps 
Pour le moment, dans ton dmesg :
microdia: Camera 0C45:627F not supported.
Donc c'est cuit pour le moment ..... à suivre avec l'évolution du driver
"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu" Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr
Hors ligne
#2287 Le 18/08/2008, à 13:45
- Anbreizh
Re : [Clos] Centralisation Probleme Webcam+EasyCam
J'ai mis à jour EasyCam2 pour ta webcam (Il existe un patch sur la mailling list du driver). Retest l'installation et donne moi le résultat de la commande dmesg apres l'installation
"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu" Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr
Hors ligne
#2288 Le 18/08/2008, à 15:01
- ubuntu_sk
Re : [Clos] Centralisation Probleme Webcam+EasyCam
pardon d'avoir insisté...
ce que je comprends pas c'est que j'ai vu ma camera dans la liste des supportées... ><
enfin bref, j'ai mis à jour et retenté, rien de neuf, je met le dmesg :
[ 24.273520] SMP alternatives: switching to SMP code
[ 24.274180] Booting processor 1/1 eip 3000
[ 24.284415] Initializing CPU#1
[ 24.362398] Calibrating delay using timer specific routine.. 3724.07 BogoMIPS (lpj=7448148)
[ 24.362405] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
[ 24.362410] monitor/mwait feature present.
[ 24.362413] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 24.362415] CPU: L2 cache: 2048K
[ 24.362417] CPU: Physical Processor ID: 0
[ 24.362419] CPU: Processor Core ID: 1
[ 24.362420] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
[ 24.362996] CPU1: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz stepping 0c
[ 24.363017] Total of 2 processors activated (7451.73 BogoMIPS).
[ 24.363186] ENABLING IO-APIC IRQs
[ 24.363368] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 24.510259] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 24.530245] Brought up 2 CPUs
[ 24.530270] CPU0 attaching sched-domain:
[ 24.530272] domain 0: span 03
[ 24.530274] groups: 01 02
[ 24.530277] CPU1 attaching sched-domain:
[ 24.530279] domain 0: span 03
[ 24.530280] groups: 02 01
[ 24.530526] net_namespace: 64 bytes
[ 24.530536] Booting paravirtualized kernel on bare hardware
[ 24.530965] Time: 10:45:04 Date: 08/18/08
[ 24.530994] NET: Registered protocol family 16
[ 24.531202] EISA bus registered
[ 24.531207] ACPI: bus type pci registered
[ 24.531454] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[ 24.531456] PCI: Using configuration type 1
[ 24.531474] Setting up standard PCI resources
[ 24.536596] ACPI: EC: Look up EC in DSDT
[ 24.823549] ACPI: Interpreter enabled
[ 24.823552] ACPI: (supports S0 S1 S3 S4 S5)
[ 24.823571] ACPI: Using IOAPIC for interrupt routing
[ 24.834922] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 24.834925] ACPI: EC: driver started in poll mode
[ 24.835063] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.835764] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 24.835768] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 24.837002] PCI: Transparent bridge - 0000:00:1e.0
[ 24.837046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 24.837226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 24.837348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 24.837515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 24.837650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 24.837782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 24.851559] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 24.851738] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 12)
[ 24.851915] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 12)
[ 24.852091] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 12)
[ 24.852268] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.852445] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.852622] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.852800] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 12)
[ 24.852972] ACPI: Power Resource [GFAN] (off)
[ 24.853015] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 90, should be 8E [20070126]
[ 24.853022] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 24.853054] pnp: PnP ACPI init
[ 24.853060] ACPI: bus type pnp registered
[ 24.857874] pnp: PnP ACPI: found 16 devices
[ 24.857876] ACPI: ACPI bus type pnp unregistered
[ 24.857880] PnPBIOS: Disabled by ACPI PNP
[ 24.858118] PCI: Using ACPI for IRQ routing
[ 24.858121] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 24.897600] NET: Registered protocol family 8
[ 24.897602] NET: Registered protocol family 20
[ 24.897637] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 24.897642] hpet0: 3 64-bit timers, 14318180 Hz
[ 24.898673] AppArmor: AppArmor Filesystem Enabled
[ 24.901464] Time: tsc clocksource has been installed.
[ 24.901479] Switched to high resolution mode on CPU 0
[ 24.901589] Switched to high resolution mode on CPU 1
[ 24.914439] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 24.914450] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 24.914452] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 24.914455] system 00:0a: ioport range 0xa20-0xa2f has been reserved
[ 24.914458] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[ 24.914460] system 00:0a: ioport range 0xa40-0xa4f has been reserved
[ 24.914466] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 24.914468] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 24.914471] system 00:0b: ioport range 0x400-0x41f has been reserved
[ 24.914474] system 00:0b: ioport range 0x480-0x4bf has been reserved
[ 24.914477] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 24.914480] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 24.914482] system 00:0b: iomem range 0xfed45000-0xfed89fff has been reserved
[ 24.914485] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved
[ 24.914488] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
[ 24.914496] system 00:0d: ioport range 0x250-0x253 has been reserved
[ 24.914498] system 00:0d: ioport range 0x256-0x25f has been reserved
[ 24.914501] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 24.914504] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 24.914507] system 00:0d: iomem range 0xfec10000-0xfec17fff has been reserved
[ 24.914510] system 00:0d: iomem range 0xfec18000-0xfec1ffff has been reserved
[ 24.914513] system 00:0d: iomem range 0xfec20000-0xfec27fff has been reserved
[ 24.914518] system 00:0e: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 24.914524] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 24.914527] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[ 24.914529] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 24.914532] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
[ 24.914535] system 00:0f: iomem range 0x0-0x0 could not be reserved
[ 24.944931] PCI: Bridge: 0000:00:01.0
[ 24.944934] IO window: b000-dfff
[ 24.944938] MEM window: fe000000-fe0fffff
[ 24.944941] PREFETCH window: bff00000-dfefffff
[ 24.944945] PCI: Bridge: 0000:00:1c.0
[ 24.944948] IO window: a000-afff
[ 24.944953] MEM window: fdf00000-fdffffff
[ 24.944957] PREFETCH window: disabled.
[ 24.944962] PCI: Bridge: 0000:00:1c.1
[ 24.944963] IO window: disabled.
[ 24.944969] MEM window: fde00000-fdefffff
[ 24.944972] PREFETCH window: disabled.
[ 24.944978] PCI: Bridge: 0000:00:1c.2
[ 24.944980] IO window: 8000-9fff
[ 24.944986] MEM window: f9e00000-fddfffff
[ 24.944990] PREFETCH window: 9ff00000-bfefffff
[ 24.944995] PCI: Bridge: 0000:00:1e.0
[ 24.944997] IO window: disabled.
[ 24.945002] MEM window: f9d00000-f9dfffff
[ 24.945006] PREFETCH window: disabled.
[ 24.945023] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.945029] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 24.945049] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.945055] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 24.945076] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 24.945081] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 24.945102] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 24.945108] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 24.945120] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 24.945131] NET: Registered protocol family 2
[ 24.989332] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.989544] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 24.990213] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 24.990542] TCP: Hash tables configured (established 131072 bind 65536)
[ 24.990545] TCP reno registered
[ 25.001407] checking if image is initramfs... it is
[ 25.649153] Freeing initrd memory: 7303k freed
[ 25.649318] Simple Boot Flag at 0x52 set to 0x1
[ 25.649991] audit: initializing netlink socket (disabled)
[ 25.650004] audit(1219056304.424:1): initialized
[ 25.650234] highmem bounce pool size: 64 pages
[ 25.652219] VFS: Disk quotas dquot_6.5.1
[ 25.652295] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 25.652421] io scheduler noop registered
[ 25.652423] io scheduler anticipatory registered
[ 25.652425] io scheduler deadline registered
[ 25.652436] io scheduler cfq registered (default)
[ 25.652530] Boot video device is 0000:07:00.0
[ 25.652639] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.652674] assign_interrupt_mode Found MSI capability
[ 25.652705] Allocate Port Service[0000:00:01.0:pcie00]
[ 25.652784] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 25.652834] assign_interrupt_mode Found MSI capability
[ 25.652874] Allocate Port Service[0000:00:1c.0:pcie00]
[ 25.652910] Allocate Port Service[0000:00:1c.0:pcie02]
[ 25.653005] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 25.653053] assign_interrupt_mode Found MSI capability
[ 25.653093] Allocate Port Service[0000:00:1c.1:pcie00]
[ 25.653188] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 25.653238] assign_interrupt_mode Found MSI capability
[ 25.653278] Allocate Port Service[0000:00:1c.2:pcie00]
[ 25.653314] Allocate Port Service[0000:00:1c.2:pcie02]
[ 25.653573] isapnp: Scanning for PnP cards...
[ 26.006811] isapnp: No Plug & Play device found
[ 26.034034] Real Time Clock Driver v1.12ac
[ 26.034268] hpet_resources: 0xfed00000 is busy
[ 26.034300] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.034391] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 8250
[ 26.034533] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.035672] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.035740] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.035844] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 26.040254] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 26.043945] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.043949] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 26.043952] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 26.043955] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 26.043957] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 26.059516] mice: PS/2 mouse device common for all mice
[ 26.059629] EISA: Probing bus 0 at eisa.0
[ 26.059660] Cannot allocate resource for EISA slot 8
[ 26.059662] EISA: Detected 0 cards.
[ 26.059665] cpuidle: using governor ladder
[ 26.059667] cpuidle: using governor menu
[ 26.059751] NET: Registered protocol family 1
[ 26.059778] Using IPI No-Shortcut mode
[ 26.059808] registered taskstats version 1
[ 26.059916] Magic number: 4:659:780
[ 26.059976] hash matches device ptyq2
[ 26.060004] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.060005] EDD information not available.
[ 26.060203] Freeing unused kernel memory: 368k freed
[ 26.093429] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 27.265759] fuse init (API version 7.9)
[ 27.279406] ACPI: Transitioning device [FN00] to D3
[ 27.279409] ACPI: Transitioning device [FN00] to D3
[ 27.279413] ACPI: Fan [FN00] (off)
[ 27.284665] ACPI: SSDT 7FFCE290, 0D19 (r1 AMI CPU1PM 1 INTL 2002026)
[ 27.285546] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 27.285550] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 27.285603] ACPI: SSDT 7FFCEFB0, 0D19 (r1 AMI CPU2PM 1 INTL 2002026)
[ 27.286447] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 27.286452] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 27.288021] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 27.293295] ACPI: Thermal Zone [THRM] (65 C)
[ 27.649644] usbcore: registered new interface driver usbfs
[ 27.649668] usbcore: registered new interface driver hub
[ 27.649694] usbcore: registered new device driver usb
[ 27.651136] USB Universal Host Controller Interface driver v3.0
[ 27.651192] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 27.651204] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 27.651208] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 27.651463] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 27.651495] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480
[ 27.651629] usb usb1: configuration #1 chosen from 1 choice
[ 27.651651] hub 1-0:1.0: USB hub found
[ 27.651656] hub 1-0:1.0: 2 ports detected
[ 27.756610] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 20
[ 27.756623] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 27.756628] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 27.756653] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 27.756684] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e800
[ 27.756792] usb usb2: configuration #1 chosen from 1 choice
[ 27.756814] hub 2-0:1.0: USB hub found
[ 27.756820] hub 2-0:1.0: 2 ports detected
[ 27.767585] SCSI subsystem initialized
[ 27.806269] libata version 3.00 loaded.
[ 27.860429] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 27.860443] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 27.860448] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 27.860471] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 27.860504] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 27.860616] usb usb3: configuration #1 chosen from 1 choice
[ 27.860639] hub 3-0:1.0: USB hub found
[ 27.860645] hub 3-0:1.0: 2 ports detected
[ 27.964242] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 27.964255] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 27.964259] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 27.964281] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 27.964311] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 27.964417] usb usb4: configuration #1 chosen from 1 choice
[ 27.964441] hub 4-0:1.0: USB hub found
[ 27.964447] hub 4-0:1.0: 2 ports detected
[ 28.068106] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 28.068124] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 28.068128] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 28.068154] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 28.072059] ehci_hcd 0000:00:1d.7: debug port 1
[ 28.072066] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 28.072073] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe1ffc00
[ 28.099914] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 28.108903] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 28.109015] usb usb5: configuration #1 chosen from 1 choice
[ 28.109041] hub 5-0:1.0: USB hub found
[ 28.109050] hub 5-0:1.0: 8 ports detected
[ 28.213084] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 28.213112] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.213132] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 28.213449] eth0: RTL8168b/8111b at 0xf885a000, 00:1d:60:09:53:ec, XID 38000000 IRQ 219
[ 28.217352] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.269970] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[f9dfe800-f9dfefff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 28.275064] ata_piix 0000:00:1f.2: version 2.12
[ 28.275071] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 28.275101] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 20
[ 28.275136] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 28.275403] scsi0 : ata_piix
[ 28.275450] scsi1 : ata_piix
[ 28.276516] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 28.276519] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 28.439866] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[ 28.439875] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
[ 28.456845] ata1.00: configured for UDMA/100
[ 28.659963] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 28.775641] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33
[ 28.793448] usb 5-4: configuration #1 chosen from 1 choice
[ 28.946832] ata2.00: configured for UDMA/33
[ 28.946975] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 28.950736] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PR03 PQ: 0 ANSI: 5
[ 28.958752] Driver 'sd' needs updating - please use bus_type methods
[ 28.958822] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 28.958835] sd 0:0:0:0: [sda] Write Protect is off
[ 28.958837] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.958853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.958902] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 28.958912] sd 0:0:0:0: [sda] Write Protect is off
[ 28.958914] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.958930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.958934] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 28.982976] sda1 sda2 sda3
[ 28.983151] sd 0:0:0:0: [sda] Attached SCSI disk
[ 28.987918] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 28.987936] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 29.001339] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 29.001344] Uniform CD-ROM driver Revision: 3.20
[ 29.001389] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 29.159623] Attempting manual resume
[ 29.159626] swsusp: Resume From Partition 8:1
[ 29.159628] PM: Checking swsusp image.
[ 29.159807] PM: Resume from disk failed.
[ 29.172443] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 29.172446] EXT3-fs: write access will be enabled during recovery.
[ 29.397686] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 29.542756] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003a13b54]
[ 29.575792] usb 3-2: configuration #1 chosen from 1 choice
[ 29.816954] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 29.986985] usb 4-2: configuration #1 chosen from 1 choice
[ 29.990011] usbcore: registered new interface driver hiddev
[ 30.018966] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input2
[ 30.019019] input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:1d.2-2
[ 30.032032] input: USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input3
[ 30.040624] input,hidraw1: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:1d.3-2
[ 30.040650] usbcore: registered new interface driver usbhid
[ 30.040658] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 30.580359] kjournald starting. Commit interval 5 seconds
[ 30.580396] EXT3-fs: sda2: orphan cleanup on readonly fs
[ 30.580403] ext3_orphan_cleanup: deleting unreferenced inode 48590
[ 30.580424] EXT3-fs: sda2: 1 orphan inode deleted
[ 30.580426] EXT3-fs: recovery complete.
[ 30.582302] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.697570] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.733542] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.773419] Linux agpgart interface v0.102
[ 38.933235] input: Power Button (FF) as /devices/virtual/input/input4
[ 38.953083] ACPI: Power Button (FF) [PWRF]
[ 38.953197] input: Lid Switch as /devices/virtual/input/input5
[ 38.955895] ACPI: Lid Switch [LID]
[ 38.955953] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 38.985037] ACPI: Sleep Button (CM) [SLPB]
[ 38.985114] input: Power Button (CM) as /devices/virtual/input/input7
[ 39.016961] ACPI: Power Button (CM) [PWRB]
[ 39.184735] asus-laptop: Asus Laptop Support version 0.42
[ 39.185019] asus-laptop: A7C model detected
[ 39.191730] Registered led device: asus:phone
[ 39.425107] ACPI: AC Adapter [AC0] (on-line)
[ 39.559301] ACPI: Battery Slot [BAT0] (battery present)
[ 39.562421] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 39.579981] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 39.582820] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 39.611923] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 39.829471] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 39.863537] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[ 39.863576] [fglrx] ASYNCIO init succeed!
[ 39.864575] [fglrx] PAT is enabled successfully!
[ 39.864974] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 40.163048] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[ 40.163053] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 40.163166] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 40.163181] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 40.163208] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 40.238659] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.238687] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 40.268627] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[ 40.274612] iTCO_vendor_support: vendor-support=0
[ 40.310791] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 40.310885] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[ 40.310924] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 40.510393] intel_rng: FWH not detected
[ 40.523319] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 40.523322] ricoh-mmc: Copyright(c) Philip Langdale
[ 40.562435] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 40.722474] sdhci: Secure Digital Host Controller Interface driver
[ 40.722478] sdhci: Copyright(c) Pierre Ossman
[ 40.901761] irda_init()
[ 40.901781] NET: Registered protocol family 23
[ 40.976691] Linux video capture interface: v2.00
[ 41.050753] microdia: Microdia USB2.0 webcam driver startup
[ 41.050795] microdia: Camera 0C45:627F not supported.
[ 41.050812] usbcore: registered new interface driver usb_microdia_driver
[ 41.050816] microdia: v0.0.0 : Microdia USB Video Camera
[ 41.433837] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 41.477503] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 41.921301] sdhci: SDHCI controller found at 0000:01:01.1 [1180:0822] (rev 19)
[ 41.921346] ACPI: PCI Interrupt 0000:01:01.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 41.921362] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 41.921433] mmc0: SDHCI at 0xf9dff000 irq 17 DMA
[ 41.953251] ricoh-mmc: Ricoh MMC controller found at 0000:01:01.2 [1180:0843] (rev 1)
[ 41.953265] ricoh-mmc: Controller is now disabled.
[ 41.995529] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 41.996486] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[ 42.283696] lp: driver loaded but no devices found
[ 42.394674] Adding 4000020k swap on /dev/sda1. Priority:-1 extents:1 across:4000020k
[ 42.938065] EXT3 FS on sda2, internal journal
[ 63.470877] kjournald starting. Commit interval 5 seconds
[ 63.471279] EXT3 FS on sda3, internal journal
[ 63.471289] EXT3-fs: mounted filesystem with ordered data mode.
[ 63.908859] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 64.311819] No dock devices found.
[ 65.598509] apm: BIOS not found.
[ 65.792597] ppdev: user-space parallel port driver
[ 65.935105] audit(1219056344.836:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5645 profile="/usr/sbin/cupsd" namespace="default"
[ 67.302626] r8169: eth0: link down
[ 67.738797] Bluetooth: Core ver 2.11
[ 67.738959] NET: Registered protocol family 31
[ 67.738965] Bluetooth: HCI device and connection manager initialized
[ 67.738974] Bluetooth: HCI socket layer initialized
[ 67.807283] Bluetooth: L2CAP ver 2.9
[ 67.807293] Bluetooth: L2CAP socket layer initialized
[ 67.942965] Bluetooth: RFCOMM socket layer initialized
[ 67.942990] Bluetooth: RFCOMM TTY layer initialized
[ 67.942995] Bluetooth: RFCOMM ver 1.8
[ 68.780140] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 70.785811] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 70.785819] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 70.785822] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 70.868619] [fglrx] interrupt source 10000000 successfully enabled
[ 70.868628] [fglrx] enable ID = 0x00000008
[ 70.868639] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 90.952838] NET: Registered protocol family 10
[ 90.953381] lo: Disabled Privacy Extensions
[ 90.954258] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 90.955380] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 100.084197] CPU0 attaching NULL sched-domain.
[ 100.084206] CPU1 attaching NULL sched-domain.
[ 100.098920] CPU0 attaching sched-domain:
[ 100.098928] domain 0: span 03
[ 100.098933] groups: 01 02
[ 100.098942] CPU1 attaching sched-domain:
[ 100.098946] domain 0: span 03
[ 100.098951] groups: 02 01
[ 1651.633447] r8169: eth0: link up
[ 1651.637556] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1651.954521] r8169: eth0: link down
[ 1652.839428] NET: Registered protocol family 17
[ 1657.004676] r8169: eth0: link up
[ 1657.008649] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1673.770572] eth0: no IPv6 routers present
[ 3739.645407] r8169: eth0: link down
[ 3787.779914] r8169: eth0: link up
[ 3787.783914] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3802.702989] eth0: no IPv6 routers presentmerci encore, j'espère que ça marchera un jour (quand même plus d'un an maintenant que j'attends XD)
Dernière modification par ubuntu_sk (Le 18/08/2008, à 15:03)
Hors ligne
#2289 Le 18/08/2008, à 15:05
- Anbreizh
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Ne t'excuse pas ! Aucun soucis.
Je vais continuer de voir si je peux modifier le driver
"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu" Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr
Hors ligne
#2290 Le 18/08/2008, à 15:09
- Anbreizh
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Une toute petite erreur empeche de detecter ta webcam. Je corrige. Mise à jour dans 3 min
Pour la liste des webcams supporté de microdia, elle n'est pas à jour, c'est long à maintenir sur un driver qui evolue aussi vite. Je préfère me focaliser sur le driver lui meme ...
"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu" Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr
Hors ligne
#2291 Le 18/08/2008, à 15:29
- Anbreizh
Re : [Clos] Centralisation Probleme Webcam+EasyCam
La mise à jour est dispo
"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu" Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr
Hors ligne
#2292 Le 18/08/2008, à 15:47
- ubuntu_sk
Re : [Clos] Centralisation Probleme Webcam+EasyCam
merci de ta rapidité...
malheureusement, ça marche tjs pas :'(
je te remet le dmesg apres coup :
[ 24.530272] domain 0: span 03
[ 24.530274] groups: 01 02
[ 24.530277] CPU1 attaching sched-domain:
[ 24.530279] domain 0: span 03
[ 24.530280] groups: 02 01
[ 24.530526] net_namespace: 64 bytes
[ 24.530536] Booting paravirtualized kernel on bare hardware
[ 24.530965] Time: 10:45:04 Date: 08/18/08
[ 24.530994] NET: Registered protocol family 16
[ 24.531202] EISA bus registered
[ 24.531207] ACPI: bus type pci registered
[ 24.531454] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[ 24.531456] PCI: Using configuration type 1
[ 24.531474] Setting up standard PCI resources
[ 24.536596] ACPI: EC: Look up EC in DSDT
[ 24.823549] ACPI: Interpreter enabled
[ 24.823552] ACPI: (supports S0 S1 S3 S4 S5)
[ 24.823571] ACPI: Using IOAPIC for interrupt routing
[ 24.834922] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 24.834925] ACPI: EC: driver started in poll mode
[ 24.835063] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.835764] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 24.835768] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 24.837002] PCI: Transparent bridge - 0000:00:1e.0
[ 24.837046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 24.837226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 24.837348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 24.837515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 24.837650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 24.837782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 24.851559] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 24.851738] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 12)
[ 24.851915] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 12)
[ 24.852091] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 12)
[ 24.852268] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.852445] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.852622] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.852800] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 12)
[ 24.852972] ACPI: Power Resource [GFAN] (off)
[ 24.853015] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 90, should be 8E [20070126]
[ 24.853022] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 24.853054] pnp: PnP ACPI init
[ 24.853060] ACPI: bus type pnp registered
[ 24.857874] pnp: PnP ACPI: found 16 devices
[ 24.857876] ACPI: ACPI bus type pnp unregistered
[ 24.857880] PnPBIOS: Disabled by ACPI PNP
[ 24.858118] PCI: Using ACPI for IRQ routing
[ 24.858121] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 24.897600] NET: Registered protocol family 8
[ 24.897602] NET: Registered protocol family 20
[ 24.897637] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 24.897642] hpet0: 3 64-bit timers, 14318180 Hz
[ 24.898673] AppArmor: AppArmor Filesystem Enabled
[ 24.901464] Time: tsc clocksource has been installed.
[ 24.901479] Switched to high resolution mode on CPU 0
[ 24.901589] Switched to high resolution mode on CPU 1
[ 24.914439] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 24.914450] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 24.914452] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 24.914455] system 00:0a: ioport range 0xa20-0xa2f has been reserved
[ 24.914458] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[ 24.914460] system 00:0a: ioport range 0xa40-0xa4f has been reserved
[ 24.914466] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 24.914468] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 24.914471] system 00:0b: ioport range 0x400-0x41f has been reserved
[ 24.914474] system 00:0b: ioport range 0x480-0x4bf has been reserved
[ 24.914477] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 24.914480] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 24.914482] system 00:0b: iomem range 0xfed45000-0xfed89fff has been reserved
[ 24.914485] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved
[ 24.914488] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
[ 24.914496] system 00:0d: ioport range 0x250-0x253 has been reserved
[ 24.914498] system 00:0d: ioport range 0x256-0x25f has been reserved
[ 24.914501] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 24.914504] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 24.914507] system 00:0d: iomem range 0xfec10000-0xfec17fff has been reserved
[ 24.914510] system 00:0d: iomem range 0xfec18000-0xfec1ffff has been reserved
[ 24.914513] system 00:0d: iomem range 0xfec20000-0xfec27fff has been reserved
[ 24.914518] system 00:0e: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 24.914524] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 24.914527] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[ 24.914529] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 24.914532] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
[ 24.914535] system 00:0f: iomem range 0x0-0x0 could not be reserved
[ 24.944931] PCI: Bridge: 0000:00:01.0
[ 24.944934] IO window: b000-dfff
[ 24.944938] MEM window: fe000000-fe0fffff
[ 24.944941] PREFETCH window: bff00000-dfefffff
[ 24.944945] PCI: Bridge: 0000:00:1c.0
[ 24.944948] IO window: a000-afff
[ 24.944953] MEM window: fdf00000-fdffffff
[ 24.944957] PREFETCH window: disabled.
[ 24.944962] PCI: Bridge: 0000:00:1c.1
[ 24.944963] IO window: disabled.
[ 24.944969] MEM window: fde00000-fdefffff
[ 24.944972] PREFETCH window: disabled.
[ 24.944978] PCI: Bridge: 0000:00:1c.2
[ 24.944980] IO window: 8000-9fff
[ 24.944986] MEM window: f9e00000-fddfffff
[ 24.944990] PREFETCH window: 9ff00000-bfefffff
[ 24.944995] PCI: Bridge: 0000:00:1e.0
[ 24.944997] IO window: disabled.
[ 24.945002] MEM window: f9d00000-f9dfffff
[ 24.945006] PREFETCH window: disabled.
[ 24.945023] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.945029] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 24.945049] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.945055] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 24.945076] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 24.945081] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 24.945102] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 24.945108] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 24.945120] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 24.945131] NET: Registered protocol family 2
[ 24.989332] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.989544] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 24.990213] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 24.990542] TCP: Hash tables configured (established 131072 bind 65536)
[ 24.990545] TCP reno registered
[ 25.001407] checking if image is initramfs... it is
[ 25.649153] Freeing initrd memory: 7303k freed
[ 25.649318] Simple Boot Flag at 0x52 set to 0x1
[ 25.649991] audit: initializing netlink socket (disabled)
[ 25.650004] audit(1219056304.424:1): initialized
[ 25.650234] highmem bounce pool size: 64 pages
[ 25.652219] VFS: Disk quotas dquot_6.5.1
[ 25.652295] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 25.652421] io scheduler noop registered
[ 25.652423] io scheduler anticipatory registered
[ 25.652425] io scheduler deadline registered
[ 25.652436] io scheduler cfq registered (default)
[ 25.652530] Boot video device is 0000:07:00.0
[ 25.652639] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.652674] assign_interrupt_mode Found MSI capability
[ 25.652705] Allocate Port Service[0000:00:01.0:pcie00]
[ 25.652784] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 25.652834] assign_interrupt_mode Found MSI capability
[ 25.652874] Allocate Port Service[0000:00:1c.0:pcie00]
[ 25.652910] Allocate Port Service[0000:00:1c.0:pcie02]
[ 25.653005] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 25.653053] assign_interrupt_mode Found MSI capability
[ 25.653093] Allocate Port Service[0000:00:1c.1:pcie00]
[ 25.653188] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 25.653238] assign_interrupt_mode Found MSI capability
[ 25.653278] Allocate Port Service[0000:00:1c.2:pcie00]
[ 25.653314] Allocate Port Service[0000:00:1c.2:pcie02]
[ 25.653573] isapnp: Scanning for PnP cards...
[ 26.006811] isapnp: No Plug & Play device found
[ 26.034034] Real Time Clock Driver v1.12ac
[ 26.034268] hpet_resources: 0xfed00000 is busy
[ 26.034300] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.034391] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 8250
[ 26.034533] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.035672] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.035740] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.035844] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 26.040254] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 26.043945] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.043949] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 26.043952] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 26.043955] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 26.043957] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 26.059516] mice: PS/2 mouse device common for all mice
[ 26.059629] EISA: Probing bus 0 at eisa.0
[ 26.059660] Cannot allocate resource for EISA slot 8
[ 26.059662] EISA: Detected 0 cards.
[ 26.059665] cpuidle: using governor ladder
[ 26.059667] cpuidle: using governor menu
[ 26.059751] NET: Registered protocol family 1
[ 26.059778] Using IPI No-Shortcut mode
[ 26.059808] registered taskstats version 1
[ 26.059916] Magic number: 4:659:780
[ 26.059976] hash matches device ptyq2
[ 26.060004] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.060005] EDD information not available.
[ 26.060203] Freeing unused kernel memory: 368k freed
[ 26.093429] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 27.265759] fuse init (API version 7.9)
[ 27.279406] ACPI: Transitioning device [FN00] to D3
[ 27.279409] ACPI: Transitioning device [FN00] to D3
[ 27.279413] ACPI: Fan [FN00] (off)
[ 27.284665] ACPI: SSDT 7FFCE290, 0D19 (r1 AMI CPU1PM 1 INTL 2002026)
[ 27.285546] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 27.285550] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 27.285603] ACPI: SSDT 7FFCEFB0, 0D19 (r1 AMI CPU2PM 1 INTL 2002026)
[ 27.286447] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 27.286452] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 27.288021] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 27.293295] ACPI: Thermal Zone [THRM] (65 C)
[ 27.649644] usbcore: registered new interface driver usbfs
[ 27.649668] usbcore: registered new interface driver hub
[ 27.649694] usbcore: registered new device driver usb
[ 27.651136] USB Universal Host Controller Interface driver v3.0
[ 27.651192] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 27.651204] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 27.651208] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 27.651463] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 27.651495] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480
[ 27.651629] usb usb1: configuration #1 chosen from 1 choice
[ 27.651651] hub 1-0:1.0: USB hub found
[ 27.651656] hub 1-0:1.0: 2 ports detected
[ 27.756610] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 20
[ 27.756623] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 27.756628] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 27.756653] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 27.756684] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e800
[ 27.756792] usb usb2: configuration #1 chosen from 1 choice
[ 27.756814] hub 2-0:1.0: USB hub found
[ 27.756820] hub 2-0:1.0: 2 ports detected
[ 27.767585] SCSI subsystem initialized
[ 27.806269] libata version 3.00 loaded.
[ 27.860429] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 27.860443] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 27.860448] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 27.860471] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 27.860504] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 27.860616] usb usb3: configuration #1 chosen from 1 choice
[ 27.860639] hub 3-0:1.0: USB hub found
[ 27.860645] hub 3-0:1.0: 2 ports detected
[ 27.964242] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 27.964255] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 27.964259] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 27.964281] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 27.964311] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 27.964417] usb usb4: configuration #1 chosen from 1 choice
[ 27.964441] hub 4-0:1.0: USB hub found
[ 27.964447] hub 4-0:1.0: 2 ports detected
[ 28.068106] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 28.068124] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 28.068128] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 28.068154] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 28.072059] ehci_hcd 0000:00:1d.7: debug port 1
[ 28.072066] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 28.072073] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe1ffc00
[ 28.099914] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 28.108903] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 28.109015] usb usb5: configuration #1 chosen from 1 choice
[ 28.109041] hub 5-0:1.0: USB hub found
[ 28.109050] hub 5-0:1.0: 8 ports detected
[ 28.213084] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 28.213112] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.213132] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 28.213449] eth0: RTL8168b/8111b at 0xf885a000, 00:1d:60:09:53:ec, XID 38000000 IRQ 219
[ 28.217352] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.269970] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[f9dfe800-f9dfefff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 28.275064] ata_piix 0000:00:1f.2: version 2.12
[ 28.275071] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 28.275101] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 20
[ 28.275136] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 28.275403] scsi0 : ata_piix
[ 28.275450] scsi1 : ata_piix
[ 28.276516] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 28.276519] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 28.439866] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[ 28.439875] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
[ 28.456845] ata1.00: configured for UDMA/100
[ 28.659963] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 28.775641] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33
[ 28.793448] usb 5-4: configuration #1 chosen from 1 choice
[ 28.946832] ata2.00: configured for UDMA/33
[ 28.946975] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 28.950736] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PR03 PQ: 0 ANSI: 5
[ 28.958752] Driver 'sd' needs updating - please use bus_type methods
[ 28.958822] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 28.958835] sd 0:0:0:0: [sda] Write Protect is off
[ 28.958837] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.958853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.958902] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 28.958912] sd 0:0:0:0: [sda] Write Protect is off
[ 28.958914] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.958930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.958934] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 28.982976] sda1 sda2 sda3
[ 28.983151] sd 0:0:0:0: [sda] Attached SCSI disk
[ 28.987918] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 28.987936] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 29.001339] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 29.001344] Uniform CD-ROM driver Revision: 3.20
[ 29.001389] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 29.159623] Attempting manual resume
[ 29.159626] swsusp: Resume From Partition 8:1
[ 29.159628] PM: Checking swsusp image.
[ 29.159807] PM: Resume from disk failed.
[ 29.172443] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 29.172446] EXT3-fs: write access will be enabled during recovery.
[ 29.397686] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 29.542756] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003a13b54]
[ 29.575792] usb 3-2: configuration #1 chosen from 1 choice
[ 29.816954] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 29.986985] usb 4-2: configuration #1 chosen from 1 choice
[ 29.990011] usbcore: registered new interface driver hiddev
[ 30.018966] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input2
[ 30.019019] input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:1d.2-2
[ 30.032032] input: USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input3
[ 30.040624] input,hidraw1: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:1d.3-2
[ 30.040650] usbcore: registered new interface driver usbhid
[ 30.040658] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 30.580359] kjournald starting. Commit interval 5 seconds
[ 30.580396] EXT3-fs: sda2: orphan cleanup on readonly fs
[ 30.580403] ext3_orphan_cleanup: deleting unreferenced inode 48590
[ 30.580424] EXT3-fs: sda2: 1 orphan inode deleted
[ 30.580426] EXT3-fs: recovery complete.
[ 30.582302] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.697570] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.733542] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.773419] Linux agpgart interface v0.102
[ 38.933235] input: Power Button (FF) as /devices/virtual/input/input4
[ 38.953083] ACPI: Power Button (FF) [PWRF]
[ 38.953197] input: Lid Switch as /devices/virtual/input/input5
[ 38.955895] ACPI: Lid Switch [LID]
[ 38.955953] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 38.985037] ACPI: Sleep Button (CM) [SLPB]
[ 38.985114] input: Power Button (CM) as /devices/virtual/input/input7
[ 39.016961] ACPI: Power Button (CM) [PWRB]
[ 39.184735] asus-laptop: Asus Laptop Support version 0.42
[ 39.185019] asus-laptop: A7C model detected
[ 39.191730] Registered led device: asus:phone
[ 39.425107] ACPI: AC Adapter [AC0] (on-line)
[ 39.559301] ACPI: Battery Slot [BAT0] (battery present)
[ 39.562421] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 39.579981] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 39.582820] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 39.611923] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 39.829471] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 39.863537] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[ 39.863576] [fglrx] ASYNCIO init succeed!
[ 39.864575] [fglrx] PAT is enabled successfully!
[ 39.864974] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 40.163048] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[ 40.163053] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 40.163166] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 40.163181] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 40.163208] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 40.238659] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.238687] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 40.268627] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[ 40.274612] iTCO_vendor_support: vendor-support=0
[ 40.310791] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 40.310885] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[ 40.310924] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 40.510393] intel_rng: FWH not detected
[ 40.523319] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 40.523322] ricoh-mmc: Copyright(c) Philip Langdale
[ 40.562435] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 40.722474] sdhci: Secure Digital Host Controller Interface driver
[ 40.722478] sdhci: Copyright(c) Pierre Ossman
[ 40.901761] irda_init()
[ 40.901781] NET: Registered protocol family 23
[ 40.976691] Linux video capture interface: v2.00
[ 41.050753] microdia: Microdia USB2.0 webcam driver startup
[ 41.050795] microdia: Camera 0C45:627F not supported.
[ 41.050812] usbcore: registered new interface driver usb_microdia_driver
[ 41.050816] microdia: v0.0.0 : Microdia USB Video Camera
[ 41.433837] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 41.477503] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 41.921301] sdhci: SDHCI controller found at 0000:01:01.1 [1180:0822] (rev 19)
[ 41.921346] ACPI: PCI Interrupt 0000:01:01.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 41.921362] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 41.921433] mmc0: SDHCI at 0xf9dff000 irq 17 DMA
[ 41.953251] ricoh-mmc: Ricoh MMC controller found at 0000:01:01.2 [1180:0843] (rev 1)
[ 41.953265] ricoh-mmc: Controller is now disabled.
[ 41.995529] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 41.996486] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[ 42.283696] lp: driver loaded but no devices found
[ 42.394674] Adding 4000020k swap on /dev/sda1. Priority:-1 extents:1 across:4000020k
[ 42.938065] EXT3 FS on sda2, internal journal
[ 63.470877] kjournald starting. Commit interval 5 seconds
[ 63.471279] EXT3 FS on sda3, internal journal
[ 63.471289] EXT3-fs: mounted filesystem with ordered data mode.
[ 63.908859] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 64.311819] No dock devices found.
[ 65.598509] apm: BIOS not found.
[ 65.792597] ppdev: user-space parallel port driver
[ 65.935105] audit(1219056344.836:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5645 profile="/usr/sbin/cupsd" namespace="default"
[ 67.302626] r8169: eth0: link down
[ 67.738797] Bluetooth: Core ver 2.11
[ 67.738959] NET: Registered protocol family 31
[ 67.738965] Bluetooth: HCI device and connection manager initialized
[ 67.738974] Bluetooth: HCI socket layer initialized
[ 67.807283] Bluetooth: L2CAP ver 2.9
[ 67.807293] Bluetooth: L2CAP socket layer initialized
[ 67.942965] Bluetooth: RFCOMM socket layer initialized
[ 67.942990] Bluetooth: RFCOMM TTY layer initialized
[ 67.942995] Bluetooth: RFCOMM ver 1.8
[ 68.780140] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 70.785811] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 70.785819] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 70.785822] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 70.868619] [fglrx] interrupt source 10000000 successfully enabled
[ 70.868628] [fglrx] enable ID = 0x00000008
[ 70.868639] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 90.952838] NET: Registered protocol family 10
[ 90.953381] lo: Disabled Privacy Extensions
[ 90.954258] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 90.955380] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 100.084197] CPU0 attaching NULL sched-domain.
[ 100.084206] CPU1 attaching NULL sched-domain.
[ 100.098920] CPU0 attaching sched-domain:
[ 100.098928] domain 0: span 03
[ 100.098933] groups: 01 02
[ 100.098942] CPU1 attaching sched-domain:
[ 100.098946] domain 0: span 03
[ 100.098951] groups: 02 01
[ 1651.633447] r8169: eth0: link up
[ 1651.637556] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1651.954521] r8169: eth0: link down
[ 1652.839428] NET: Registered protocol family 17
[ 1657.004676] r8169: eth0: link up
[ 1657.008649] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1673.770572] eth0: no IPv6 routers present
[ 3739.645407] r8169: eth0: link down
[ 3787.779914] r8169: eth0: link up
[ 3787.783914] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3802.702989] eth0: no IPv6 routers present
[ 8879.437296] [fglrx] interrupt source 10000000 successfully disabled!
[ 8879.437307] [fglrx] enable ID = 0x00000000
[ 8879.437314] [fglrx] Receive disable interrupt message with irqEnableMask: 10000000; dwIRQEnableId: 00000008
[ 8882.945059] [fglrx] PCIe has already been initialized. Reinitializing ...
[ 8882.967569] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 8882.967576] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 8882.967578] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 8883.039318] [fglrx] interrupt source 10000000 successfully enabled
[ 8883.039325] [fglrx] enable ID = 0x00000008
[ 8883.039335] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 8896.944255] CPU0 attaching NULL sched-domain.
[ 8896.944262] CPU1 attaching NULL sched-domain.
[ 8896.961964] CPU0 attaching sched-domain:
[ 8896.961970] domain 0: span 03
[ 8896.961972] groups: 01 02
[ 8896.961975] CPU1 attaching sched-domain:
[ 8896.961977] domain 0: span 03
[ 8896.961978] groups: 02 01
[ 9184.016683] ADDRCONF(NETDEV_UP): wlan0: link is not readyest-ce que je me suis planté qqpart ?
je met à jour puis j'ai relancé easycam2 et j'ai réinstallé puis je teste avec cheese, c'est bien ça ?
Hors ligne
#2293 Le 18/08/2008, à 15:52
- Anbreizh
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Lance la commande
sudo python /usr/share/EasyCam2/core.py -g
Et donne moi la sortie. Car normalement, le message not supported ne devrai plus etre la ....
"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu" Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr
Hors ligne
#2294 Le 18/08/2008, à 15:54
- ubuntu_sk
Re : [Clos] Centralisation Probleme Webcam+EasyCam
alors ca donne :
GO !
ln: création d'un lien symbolique `/lib/modules/2.6.24-19-generic/build/include/linux/config.h': Le fichier existe
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
linux-headers-2.6.24-19-generic est déjà la plus récente version disponible.
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libarts1c2a kdelibs4c2a libartsc0 kdelibs-data liblualib50 libflac++6
libavahi-qt3-1 libsdl-mixer1.2 liblua50 python-eyed3
Veuillez utiliser « apt-get autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
linux-source-2.6.24 est déjà la plus récente version disponible.
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libarts1c2a kdelibs4c2a libartsc0 kdelibs-data liblualib50 libflac++6
libavahi-qt3-1 libsdl-mixer1.2 liblua50 python-eyed3
Veuillez utiliser « apt-get autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
make -C /lib/modules/2.6.24-19-generic/build SUBDIRS= clean
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.24-19-generic »
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.24-19-generic »
make -C /lib/modules/2.6.24-19-generic/build SUBDIRS=/usr/share/EasyCam2/drivers/microdia modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.24-19-generic »
Building modules, stage 2.
MODPOST 1 modules
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.24-19-generic »
insmod: error inserting './microdia.ko': -1 File existsHors ligne
#2295 Le 18/08/2008, à 16:03
- Anbreizh
Re : [Clos] Centralisation Probleme Webcam+EasyCam
L'erreur est corrigé ! La mise à jour est prête. Pour l'installation, une fois que tu a mis EasyCam à jour, utilise la commande ci dessus, pour voir si jamais il y a une erreur. Et l'habituel dmesg .. 
Merci
"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu" Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr
Hors ligne
#2296 Le 18/08/2008, à 16:12
- ubuntu_sk
Re : [Clos] Centralisation Probleme Webcam+EasyCam
alors :
kaiba@kaibacorp-cpu:~$ sudo python /usr/share/EasyCam2/core.py -g
GO !
ln: création d'un lien symbolique `/lib/modules/2.6.24-19-generic/build/include/linux/config.h': Le fichier existe
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
linux-headers-2.6.24-19-generic est déjà la plus récente version disponible.
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libarts1c2a kdelibs4c2a libartsc0 kdelibs-data liblualib50 libflac++6
libavahi-qt3-1 libsdl-mixer1.2 liblua50 python-eyed3
Veuillez utiliser « apt-get autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
linux-source-2.6.24 est déjà la plus récente version disponible.
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libarts1c2a kdelibs4c2a libartsc0 kdelibs-data liblualib50 libflac++6
libavahi-qt3-1 libsdl-mixer1.2 liblua50 python-eyed3
Veuillez utiliser « apt-get autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
make -C /lib/modules/2.6.24-19-generic/build SUBDIRS= clean
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.24-19-generic »
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.24-19-generic »
make -C /lib/modules/2.6.24-19-generic/build SUBDIRS=/usr/share/EasyCam2/drivers/microdia modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.24-19-generic »
Building modules, stage 2.
MODPOST 1 modules
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.24-19-generic »et :
[ 24.530277] CPU1 attaching sched-domain:
[ 24.530279] domain 0: span 03
[ 24.530280] groups: 02 01
[ 24.530526] net_namespace: 64 bytes
[ 24.530536] Booting paravirtualized kernel on bare hardware
[ 24.530965] Time: 10:45:04 Date: 08/18/08
[ 24.530994] NET: Registered protocol family 16
[ 24.531202] EISA bus registered
[ 24.531207] ACPI: bus type pci registered
[ 24.531454] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[ 24.531456] PCI: Using configuration type 1
[ 24.531474] Setting up standard PCI resources
[ 24.536596] ACPI: EC: Look up EC in DSDT
[ 24.823549] ACPI: Interpreter enabled
[ 24.823552] ACPI: (supports S0 S1 S3 S4 S5)
[ 24.823571] ACPI: Using IOAPIC for interrupt routing
[ 24.834922] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 24.834925] ACPI: EC: driver started in poll mode
[ 24.835063] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.835764] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 24.835768] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 24.837002] PCI: Transparent bridge - 0000:00:1e.0
[ 24.837046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 24.837226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 24.837348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 24.837515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 24.837650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 24.837782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 24.851559] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 24.851738] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 12)
[ 24.851915] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 12)
[ 24.852091] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 12)
[ 24.852268] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.852445] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.852622] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.852800] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 12)
[ 24.852972] ACPI: Power Resource [GFAN] (off)
[ 24.853015] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 90, should be 8E [20070126]
[ 24.853022] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 24.853054] pnp: PnP ACPI init
[ 24.853060] ACPI: bus type pnp registered
[ 24.857874] pnp: PnP ACPI: found 16 devices
[ 24.857876] ACPI: ACPI bus type pnp unregistered
[ 24.857880] PnPBIOS: Disabled by ACPI PNP
[ 24.858118] PCI: Using ACPI for IRQ routing
[ 24.858121] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 24.897600] NET: Registered protocol family 8
[ 24.897602] NET: Registered protocol family 20
[ 24.897637] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 24.897642] hpet0: 3 64-bit timers, 14318180 Hz
[ 24.898673] AppArmor: AppArmor Filesystem Enabled
[ 24.901464] Time: tsc clocksource has been installed.
[ 24.901479] Switched to high resolution mode on CPU 0
[ 24.901589] Switched to high resolution mode on CPU 1
[ 24.914439] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 24.914450] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 24.914452] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 24.914455] system 00:0a: ioport range 0xa20-0xa2f has been reserved
[ 24.914458] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[ 24.914460] system 00:0a: ioport range 0xa40-0xa4f has been reserved
[ 24.914466] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 24.914468] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 24.914471] system 00:0b: ioport range 0x400-0x41f has been reserved
[ 24.914474] system 00:0b: ioport range 0x480-0x4bf has been reserved
[ 24.914477] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 24.914480] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 24.914482] system 00:0b: iomem range 0xfed45000-0xfed89fff has been reserved
[ 24.914485] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved
[ 24.914488] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
[ 24.914496] system 00:0d: ioport range 0x250-0x253 has been reserved
[ 24.914498] system 00:0d: ioport range 0x256-0x25f has been reserved
[ 24.914501] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 24.914504] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 24.914507] system 00:0d: iomem range 0xfec10000-0xfec17fff has been reserved
[ 24.914510] system 00:0d: iomem range 0xfec18000-0xfec1ffff has been reserved
[ 24.914513] system 00:0d: iomem range 0xfec20000-0xfec27fff has been reserved
[ 24.914518] system 00:0e: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 24.914524] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 24.914527] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[ 24.914529] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 24.914532] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
[ 24.914535] system 00:0f: iomem range 0x0-0x0 could not be reserved
[ 24.944931] PCI: Bridge: 0000:00:01.0
[ 24.944934] IO window: b000-dfff
[ 24.944938] MEM window: fe000000-fe0fffff
[ 24.944941] PREFETCH window: bff00000-dfefffff
[ 24.944945] PCI: Bridge: 0000:00:1c.0
[ 24.944948] IO window: a000-afff
[ 24.944953] MEM window: fdf00000-fdffffff
[ 24.944957] PREFETCH window: disabled.
[ 24.944962] PCI: Bridge: 0000:00:1c.1
[ 24.944963] IO window: disabled.
[ 24.944969] MEM window: fde00000-fdefffff
[ 24.944972] PREFETCH window: disabled.
[ 24.944978] PCI: Bridge: 0000:00:1c.2
[ 24.944980] IO window: 8000-9fff
[ 24.944986] MEM window: f9e00000-fddfffff
[ 24.944990] PREFETCH window: 9ff00000-bfefffff
[ 24.944995] PCI: Bridge: 0000:00:1e.0
[ 24.944997] IO window: disabled.
[ 24.945002] MEM window: f9d00000-f9dfffff
[ 24.945006] PREFETCH window: disabled.
[ 24.945023] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.945029] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 24.945049] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.945055] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 24.945076] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 24.945081] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 24.945102] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 24.945108] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 24.945120] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 24.945131] NET: Registered protocol family 2
[ 24.989332] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.989544] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 24.990213] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 24.990542] TCP: Hash tables configured (established 131072 bind 65536)
[ 24.990545] TCP reno registered
[ 25.001407] checking if image is initramfs... it is
[ 25.649153] Freeing initrd memory: 7303k freed
[ 25.649318] Simple Boot Flag at 0x52 set to 0x1
[ 25.649991] audit: initializing netlink socket (disabled)
[ 25.650004] audit(1219056304.424:1): initialized
[ 25.650234] highmem bounce pool size: 64 pages
[ 25.652219] VFS: Disk quotas dquot_6.5.1
[ 25.652295] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 25.652421] io scheduler noop registered
[ 25.652423] io scheduler anticipatory registered
[ 25.652425] io scheduler deadline registered
[ 25.652436] io scheduler cfq registered (default)
[ 25.652530] Boot video device is 0000:07:00.0
[ 25.652639] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.652674] assign_interrupt_mode Found MSI capability
[ 25.652705] Allocate Port Service[0000:00:01.0:pcie00]
[ 25.652784] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 25.652834] assign_interrupt_mode Found MSI capability
[ 25.652874] Allocate Port Service[0000:00:1c.0:pcie00]
[ 25.652910] Allocate Port Service[0000:00:1c.0:pcie02]
[ 25.653005] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 25.653053] assign_interrupt_mode Found MSI capability
[ 25.653093] Allocate Port Service[0000:00:1c.1:pcie00]
[ 25.653188] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 25.653238] assign_interrupt_mode Found MSI capability
[ 25.653278] Allocate Port Service[0000:00:1c.2:pcie00]
[ 25.653314] Allocate Port Service[0000:00:1c.2:pcie02]
[ 25.653573] isapnp: Scanning for PnP cards...
[ 26.006811] isapnp: No Plug & Play device found
[ 26.034034] Real Time Clock Driver v1.12ac
[ 26.034268] hpet_resources: 0xfed00000 is busy
[ 26.034300] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.034391] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 8250
[ 26.034533] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.035672] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.035740] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.035844] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 26.040254] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 26.043945] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.043949] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 26.043952] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 26.043955] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 26.043957] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 26.059516] mice: PS/2 mouse device common for all mice
[ 26.059629] EISA: Probing bus 0 at eisa.0
[ 26.059660] Cannot allocate resource for EISA slot 8
[ 26.059662] EISA: Detected 0 cards.
[ 26.059665] cpuidle: using governor ladder
[ 26.059667] cpuidle: using governor menu
[ 26.059751] NET: Registered protocol family 1
[ 26.059778] Using IPI No-Shortcut mode
[ 26.059808] registered taskstats version 1
[ 26.059916] Magic number: 4:659:780
[ 26.059976] hash matches device ptyq2
[ 26.060004] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.060005] EDD information not available.
[ 26.060203] Freeing unused kernel memory: 368k freed
[ 26.093429] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 27.265759] fuse init (API version 7.9)
[ 27.279406] ACPI: Transitioning device [FN00] to D3
[ 27.279409] ACPI: Transitioning device [FN00] to D3
[ 27.279413] ACPI: Fan [FN00] (off)
[ 27.284665] ACPI: SSDT 7FFCE290, 0D19 (r1 AMI CPU1PM 1 INTL 2002026)
[ 27.285546] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 27.285550] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 27.285603] ACPI: SSDT 7FFCEFB0, 0D19 (r1 AMI CPU2PM 1 INTL 2002026)
[ 27.286447] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 27.286452] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 27.288021] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 27.293295] ACPI: Thermal Zone [THRM] (65 C)
[ 27.649644] usbcore: registered new interface driver usbfs
[ 27.649668] usbcore: registered new interface driver hub
[ 27.649694] usbcore: registered new device driver usb
[ 27.651136] USB Universal Host Controller Interface driver v3.0
[ 27.651192] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 27.651204] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 27.651208] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 27.651463] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 27.651495] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480
[ 27.651629] usb usb1: configuration #1 chosen from 1 choice
[ 27.651651] hub 1-0:1.0: USB hub found
[ 27.651656] hub 1-0:1.0: 2 ports detected
[ 27.756610] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 20
[ 27.756623] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 27.756628] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 27.756653] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 27.756684] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e800
[ 27.756792] usb usb2: configuration #1 chosen from 1 choice
[ 27.756814] hub 2-0:1.0: USB hub found
[ 27.756820] hub 2-0:1.0: 2 ports detected
[ 27.767585] SCSI subsystem initialized
[ 27.806269] libata version 3.00 loaded.
[ 27.860429] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 27.860443] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 27.860448] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 27.860471] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 27.860504] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 27.860616] usb usb3: configuration #1 chosen from 1 choice
[ 27.860639] hub 3-0:1.0: USB hub found
[ 27.860645] hub 3-0:1.0: 2 ports detected
[ 27.964242] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 27.964255] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 27.964259] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 27.964281] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 27.964311] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 27.964417] usb usb4: configuration #1 chosen from 1 choice
[ 27.964441] hub 4-0:1.0: USB hub found
[ 27.964447] hub 4-0:1.0: 2 ports detected
[ 28.068106] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 28.068124] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 28.068128] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 28.068154] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 28.072059] ehci_hcd 0000:00:1d.7: debug port 1
[ 28.072066] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 28.072073] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe1ffc00
[ 28.099914] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 28.108903] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 28.109015] usb usb5: configuration #1 chosen from 1 choice
[ 28.109041] hub 5-0:1.0: USB hub found
[ 28.109050] hub 5-0:1.0: 8 ports detected
[ 28.213084] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 28.213112] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.213132] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 28.213449] eth0: RTL8168b/8111b at 0xf885a000, 00:1d:60:09:53:ec, XID 38000000 IRQ 219
[ 28.217352] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.269970] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[f9dfe800-f9dfefff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 28.275064] ata_piix 0000:00:1f.2: version 2.12
[ 28.275071] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 28.275101] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 20
[ 28.275136] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 28.275403] scsi0 : ata_piix
[ 28.275450] scsi1 : ata_piix
[ 28.276516] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 28.276519] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 28.439866] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[ 28.439875] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
[ 28.456845] ata1.00: configured for UDMA/100
[ 28.659963] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 28.775641] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33
[ 28.793448] usb 5-4: configuration #1 chosen from 1 choice
[ 28.946832] ata2.00: configured for UDMA/33
[ 28.946975] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 28.950736] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PR03 PQ: 0 ANSI: 5
[ 28.958752] Driver 'sd' needs updating - please use bus_type methods
[ 28.958822] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 28.958835] sd 0:0:0:0: [sda] Write Protect is off
[ 28.958837] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.958853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.958902] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 28.958912] sd 0:0:0:0: [sda] Write Protect is off
[ 28.958914] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.958930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.958934] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 28.982976] sda1 sda2 sda3
[ 28.983151] sd 0:0:0:0: [sda] Attached SCSI disk
[ 28.987918] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 28.987936] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 29.001339] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 29.001344] Uniform CD-ROM driver Revision: 3.20
[ 29.001389] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 29.159623] Attempting manual resume
[ 29.159626] swsusp: Resume From Partition 8:1
[ 29.159628] PM: Checking swsusp image.
[ 29.159807] PM: Resume from disk failed.
[ 29.172443] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 29.172446] EXT3-fs: write access will be enabled during recovery.
[ 29.397686] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 29.542756] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003a13b54]
[ 29.575792] usb 3-2: configuration #1 chosen from 1 choice
[ 29.816954] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 29.986985] usb 4-2: configuration #1 chosen from 1 choice
[ 29.990011] usbcore: registered new interface driver hiddev
[ 30.018966] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input2
[ 30.019019] input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:1d.2-2
[ 30.032032] input: USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input3
[ 30.040624] input,hidraw1: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:1d.3-2
[ 30.040650] usbcore: registered new interface driver usbhid
[ 30.040658] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 30.580359] kjournald starting. Commit interval 5 seconds
[ 30.580396] EXT3-fs: sda2: orphan cleanup on readonly fs
[ 30.580403] ext3_orphan_cleanup: deleting unreferenced inode 48590
[ 30.580424] EXT3-fs: sda2: 1 orphan inode deleted
[ 30.580426] EXT3-fs: recovery complete.
[ 30.582302] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.697570] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.733542] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.773419] Linux agpgart interface v0.102
[ 38.933235] input: Power Button (FF) as /devices/virtual/input/input4
[ 38.953083] ACPI: Power Button (FF) [PWRF]
[ 38.953197] input: Lid Switch as /devices/virtual/input/input5
[ 38.955895] ACPI: Lid Switch [LID]
[ 38.955953] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 38.985037] ACPI: Sleep Button (CM) [SLPB]
[ 38.985114] input: Power Button (CM) as /devices/virtual/input/input7
[ 39.016961] ACPI: Power Button (CM) [PWRB]
[ 39.184735] asus-laptop: Asus Laptop Support version 0.42
[ 39.185019] asus-laptop: A7C model detected
[ 39.191730] Registered led device: asus:phone
[ 39.425107] ACPI: AC Adapter [AC0] (on-line)
[ 39.559301] ACPI: Battery Slot [BAT0] (battery present)
[ 39.562421] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 39.579981] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 39.582820] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 39.611923] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 39.829471] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 39.863537] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[ 39.863576] [fglrx] ASYNCIO init succeed!
[ 39.864575] [fglrx] PAT is enabled successfully!
[ 39.864974] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 40.163048] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[ 40.163053] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 40.163166] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 40.163181] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 40.163208] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 40.238659] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.238687] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 40.268627] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[ 40.274612] iTCO_vendor_support: vendor-support=0
[ 40.310791] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 40.310885] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[ 40.310924] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 40.510393] intel_rng: FWH not detected
[ 40.523319] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 40.523322] ricoh-mmc: Copyright(c) Philip Langdale
[ 40.562435] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 40.722474] sdhci: Secure Digital Host Controller Interface driver
[ 40.722478] sdhci: Copyright(c) Pierre Ossman
[ 40.901761] irda_init()
[ 40.901781] NET: Registered protocol family 23
[ 40.976691] Linux video capture interface: v2.00
[ 41.050753] microdia: Microdia USB2.0 webcam driver startup
[ 41.050795] microdia: Camera 0C45:627F not supported.
[ 41.050812] usbcore: registered new interface driver usb_microdia_driver
[ 41.050816] microdia: v0.0.0 : Microdia USB Video Camera
[ 41.433837] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 41.477503] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 41.921301] sdhci: SDHCI controller found at 0000:01:01.1 [1180:0822] (rev 19)
[ 41.921346] ACPI: PCI Interrupt 0000:01:01.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 41.921362] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 41.921433] mmc0: SDHCI at 0xf9dff000 irq 17 DMA
[ 41.953251] ricoh-mmc: Ricoh MMC controller found at 0000:01:01.2 [1180:0843] (rev 1)
[ 41.953265] ricoh-mmc: Controller is now disabled.
[ 41.995529] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 41.996486] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[ 42.283696] lp: driver loaded but no devices found
[ 42.394674] Adding 4000020k swap on /dev/sda1. Priority:-1 extents:1 across:4000020k
[ 42.938065] EXT3 FS on sda2, internal journal
[ 63.470877] kjournald starting. Commit interval 5 seconds
[ 63.471279] EXT3 FS on sda3, internal journal
[ 63.471289] EXT3-fs: mounted filesystem with ordered data mode.
[ 63.908859] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 64.311819] No dock devices found.
[ 65.598509] apm: BIOS not found.
[ 65.792597] ppdev: user-space parallel port driver
[ 65.935105] audit(1219056344.836:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5645 profile="/usr/sbin/cupsd" namespace="default"
[ 67.302626] r8169: eth0: link down
[ 67.738797] Bluetooth: Core ver 2.11
[ 67.738959] NET: Registered protocol family 31
[ 67.738965] Bluetooth: HCI device and connection manager initialized
[ 67.738974] Bluetooth: HCI socket layer initialized
[ 67.807283] Bluetooth: L2CAP ver 2.9
[ 67.807293] Bluetooth: L2CAP socket layer initialized
[ 67.942965] Bluetooth: RFCOMM socket layer initialized
[ 67.942990] Bluetooth: RFCOMM TTY layer initialized
[ 67.942995] Bluetooth: RFCOMM ver 1.8
[ 68.780140] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 70.785811] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 70.785819] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 70.785822] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 70.868619] [fglrx] interrupt source 10000000 successfully enabled
[ 70.868628] [fglrx] enable ID = 0x00000008
[ 70.868639] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 90.952838] NET: Registered protocol family 10
[ 90.953381] lo: Disabled Privacy Extensions
[ 90.954258] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 90.955380] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 100.084197] CPU0 attaching NULL sched-domain.
[ 100.084206] CPU1 attaching NULL sched-domain.
[ 100.098920] CPU0 attaching sched-domain:
[ 100.098928] domain 0: span 03
[ 100.098933] groups: 01 02
[ 100.098942] CPU1 attaching sched-domain:
[ 100.098946] domain 0: span 03
[ 100.098951] groups: 02 01
[ 1651.633447] r8169: eth0: link up
[ 1651.637556] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1651.954521] r8169: eth0: link down
[ 1652.839428] NET: Registered protocol family 17
[ 1657.004676] r8169: eth0: link up
[ 1657.008649] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1673.770572] eth0: no IPv6 routers present
[ 3739.645407] r8169: eth0: link down
[ 3787.779914] r8169: eth0: link up
[ 3787.783914] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3802.702989] eth0: no IPv6 routers present
[ 8879.437296] [fglrx] interrupt source 10000000 successfully disabled!
[ 8879.437307] [fglrx] enable ID = 0x00000000
[ 8879.437314] [fglrx] Receive disable interrupt message with irqEnableMask: 10000000; dwIRQEnableId: 00000008
[ 8882.945059] [fglrx] PCIe has already been initialized. Reinitializing ...
[ 8882.967569] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 8882.967576] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 8882.967578] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 8883.039318] [fglrx] interrupt source 10000000 successfully enabled
[ 8883.039325] [fglrx] enable ID = 0x00000008
[ 8883.039335] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 8896.944255] CPU0 attaching NULL sched-domain.
[ 8896.944262] CPU1 attaching NULL sched-domain.
[ 8896.961964] CPU0 attaching sched-domain:
[ 8896.961970] domain 0: span 03
[ 8896.961972] groups: 01 02
[ 8896.961975] CPU1 attaching sched-domain:
[ 8896.961977] domain 0: span 03
[ 8896.961978] groups: 02 01
[ 9184.016683] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12193.812741] cheese[23913]: segfault at 00000000 eip b73e0ab0 esp bffe3ed0 error 4bon sang de bois ! Je vois que tu y met du cœur à la tâche et je te remercierai jamais assez mais : ça veut pas... cette fois c'est cheese qui fait une erreur :'(
Hors ligne
#2297 Le 18/08/2008, à 16:16
- Anbreizh
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Execute les commandes suivantes :
sudo modprobe -r microdia
sudo modprobe microdia
et donne moi le résultat de la commande dmesg, car j'ai encore l'erreur .....
"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu" Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr
Hors ligne
#2298 Le 18/08/2008, à 16:19
- ubuntu_sk
Re : [Clos] Centralisation Probleme Webcam+EasyCam
ca donne :
[ 24.536596] ACPI: EC: Look up EC in DSDT
[ 24.823549] ACPI: Interpreter enabled
[ 24.823552] ACPI: (supports S0 S1 S3 S4 S5)
[ 24.823571] ACPI: Using IOAPIC for interrupt routing
[ 24.834922] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 24.834925] ACPI: EC: driver started in poll mode
[ 24.835063] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.835764] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 24.835768] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 24.837002] PCI: Transparent bridge - 0000:00:1e.0
[ 24.837046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 24.837226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 24.837348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 24.837515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 24.837650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 24.837782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 24.851559] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 24.851738] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 12)
[ 24.851915] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 12)
[ 24.852091] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 12)
[ 24.852268] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.852445] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.852622] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.852800] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 12)
[ 24.852972] ACPI: Power Resource [GFAN] (off)
[ 24.853015] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 90, should be 8E [20070126]
[ 24.853022] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 24.853054] pnp: PnP ACPI init
[ 24.853060] ACPI: bus type pnp registered
[ 24.857874] pnp: PnP ACPI: found 16 devices
[ 24.857876] ACPI: ACPI bus type pnp unregistered
[ 24.857880] PnPBIOS: Disabled by ACPI PNP
[ 24.858118] PCI: Using ACPI for IRQ routing
[ 24.858121] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 24.897600] NET: Registered protocol family 8
[ 24.897602] NET: Registered protocol family 20
[ 24.897637] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 24.897642] hpet0: 3 64-bit timers, 14318180 Hz
[ 24.898673] AppArmor: AppArmor Filesystem Enabled
[ 24.901464] Time: tsc clocksource has been installed.
[ 24.901479] Switched to high resolution mode on CPU 0
[ 24.901589] Switched to high resolution mode on CPU 1
[ 24.914439] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 24.914450] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 24.914452] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 24.914455] system 00:0a: ioport range 0xa20-0xa2f has been reserved
[ 24.914458] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[ 24.914460] system 00:0a: ioport range 0xa40-0xa4f has been reserved
[ 24.914466] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 24.914468] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 24.914471] system 00:0b: ioport range 0x400-0x41f has been reserved
[ 24.914474] system 00:0b: ioport range 0x480-0x4bf has been reserved
[ 24.914477] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 24.914480] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 24.914482] system 00:0b: iomem range 0xfed45000-0xfed89fff has been reserved
[ 24.914485] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved
[ 24.914488] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
[ 24.914496] system 00:0d: ioport range 0x250-0x253 has been reserved
[ 24.914498] system 00:0d: ioport range 0x256-0x25f has been reserved
[ 24.914501] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 24.914504] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 24.914507] system 00:0d: iomem range 0xfec10000-0xfec17fff has been reserved
[ 24.914510] system 00:0d: iomem range 0xfec18000-0xfec1ffff has been reserved
[ 24.914513] system 00:0d: iomem range 0xfec20000-0xfec27fff has been reserved
[ 24.914518] system 00:0e: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 24.914524] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 24.914527] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[ 24.914529] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 24.914532] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
[ 24.914535] system 00:0f: iomem range 0x0-0x0 could not be reserved
[ 24.944931] PCI: Bridge: 0000:00:01.0
[ 24.944934] IO window: b000-dfff
[ 24.944938] MEM window: fe000000-fe0fffff
[ 24.944941] PREFETCH window: bff00000-dfefffff
[ 24.944945] PCI: Bridge: 0000:00:1c.0
[ 24.944948] IO window: a000-afff
[ 24.944953] MEM window: fdf00000-fdffffff
[ 24.944957] PREFETCH window: disabled.
[ 24.944962] PCI: Bridge: 0000:00:1c.1
[ 24.944963] IO window: disabled.
[ 24.944969] MEM window: fde00000-fdefffff
[ 24.944972] PREFETCH window: disabled.
[ 24.944978] PCI: Bridge: 0000:00:1c.2
[ 24.944980] IO window: 8000-9fff
[ 24.944986] MEM window: f9e00000-fddfffff
[ 24.944990] PREFETCH window: 9ff00000-bfefffff
[ 24.944995] PCI: Bridge: 0000:00:1e.0
[ 24.944997] IO window: disabled.
[ 24.945002] MEM window: f9d00000-f9dfffff
[ 24.945006] PREFETCH window: disabled.
[ 24.945023] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.945029] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 24.945049] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 24.945055] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 24.945076] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 24.945081] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 24.945102] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 24.945108] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 24.945120] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 24.945131] NET: Registered protocol family 2
[ 24.989332] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.989544] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 24.990213] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 24.990542] TCP: Hash tables configured (established 131072 bind 65536)
[ 24.990545] TCP reno registered
[ 25.001407] checking if image is initramfs... it is
[ 25.649153] Freeing initrd memory: 7303k freed
[ 25.649318] Simple Boot Flag at 0x52 set to 0x1
[ 25.649991] audit: initializing netlink socket (disabled)
[ 25.650004] audit(1219056304.424:1): initialized
[ 25.650234] highmem bounce pool size: 64 pages
[ 25.652219] VFS: Disk quotas dquot_6.5.1
[ 25.652295] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 25.652421] io scheduler noop registered
[ 25.652423] io scheduler anticipatory registered
[ 25.652425] io scheduler deadline registered
[ 25.652436] io scheduler cfq registered (default)
[ 25.652530] Boot video device is 0000:07:00.0
[ 25.652639] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.652674] assign_interrupt_mode Found MSI capability
[ 25.652705] Allocate Port Service[0000:00:01.0:pcie00]
[ 25.652784] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 25.652834] assign_interrupt_mode Found MSI capability
[ 25.652874] Allocate Port Service[0000:00:1c.0:pcie00]
[ 25.652910] Allocate Port Service[0000:00:1c.0:pcie02]
[ 25.653005] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 25.653053] assign_interrupt_mode Found MSI capability
[ 25.653093] Allocate Port Service[0000:00:1c.1:pcie00]
[ 25.653188] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 25.653238] assign_interrupt_mode Found MSI capability
[ 25.653278] Allocate Port Service[0000:00:1c.2:pcie00]
[ 25.653314] Allocate Port Service[0000:00:1c.2:pcie02]
[ 25.653573] isapnp: Scanning for PnP cards...
[ 26.006811] isapnp: No Plug & Play device found
[ 26.034034] Real Time Clock Driver v1.12ac
[ 26.034268] hpet_resources: 0xfed00000 is busy
[ 26.034300] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.034391] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 8250
[ 26.034533] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.035672] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.035740] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.035844] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 26.040254] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 26.043945] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.043949] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 26.043952] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 26.043955] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 26.043957] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 26.059516] mice: PS/2 mouse device common for all mice
[ 26.059629] EISA: Probing bus 0 at eisa.0
[ 26.059660] Cannot allocate resource for EISA slot 8
[ 26.059662] EISA: Detected 0 cards.
[ 26.059665] cpuidle: using governor ladder
[ 26.059667] cpuidle: using governor menu
[ 26.059751] NET: Registered protocol family 1
[ 26.059778] Using IPI No-Shortcut mode
[ 26.059808] registered taskstats version 1
[ 26.059916] Magic number: 4:659:780
[ 26.059976] hash matches device ptyq2
[ 26.060004] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.060005] EDD information not available.
[ 26.060203] Freeing unused kernel memory: 368k freed
[ 26.093429] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 27.265759] fuse init (API version 7.9)
[ 27.279406] ACPI: Transitioning device [FN00] to D3
[ 27.279409] ACPI: Transitioning device [FN00] to D3
[ 27.279413] ACPI: Fan [FN00] (off)
[ 27.284665] ACPI: SSDT 7FFCE290, 0D19 (r1 AMI CPU1PM 1 INTL 2002026)
[ 27.285546] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 27.285550] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 27.285603] ACPI: SSDT 7FFCEFB0, 0D19 (r1 AMI CPU2PM 1 INTL 2002026)
[ 27.286447] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 27.286452] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 27.288021] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 27.293295] ACPI: Thermal Zone [THRM] (65 C)
[ 27.649644] usbcore: registered new interface driver usbfs
[ 27.649668] usbcore: registered new interface driver hub
[ 27.649694] usbcore: registered new device driver usb
[ 27.651136] USB Universal Host Controller Interface driver v3.0
[ 27.651192] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 27.651204] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 27.651208] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 27.651463] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 27.651495] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480
[ 27.651629] usb usb1: configuration #1 chosen from 1 choice
[ 27.651651] hub 1-0:1.0: USB hub found
[ 27.651656] hub 1-0:1.0: 2 ports detected
[ 27.756610] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 20
[ 27.756623] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 27.756628] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 27.756653] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 27.756684] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e800
[ 27.756792] usb usb2: configuration #1 chosen from 1 choice
[ 27.756814] hub 2-0:1.0: USB hub found
[ 27.756820] hub 2-0:1.0: 2 ports detected
[ 27.767585] SCSI subsystem initialized
[ 27.806269] libata version 3.00 loaded.
[ 27.860429] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 27.860443] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 27.860448] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 27.860471] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 27.860504] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 27.860616] usb usb3: configuration #1 chosen from 1 choice
[ 27.860639] hub 3-0:1.0: USB hub found
[ 27.860645] hub 3-0:1.0: 2 ports detected
[ 27.964242] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 27.964255] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 27.964259] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 27.964281] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 27.964311] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 27.964417] usb usb4: configuration #1 chosen from 1 choice
[ 27.964441] hub 4-0:1.0: USB hub found
[ 27.964447] hub 4-0:1.0: 2 ports detected
[ 28.068106] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 28.068124] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 28.068128] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 28.068154] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 28.072059] ehci_hcd 0000:00:1d.7: debug port 1
[ 28.072066] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 28.072073] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe1ffc00
[ 28.099914] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 28.108903] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 28.109015] usb usb5: configuration #1 chosen from 1 choice
[ 28.109041] hub 5-0:1.0: USB hub found
[ 28.109050] hub 5-0:1.0: 8 ports detected
[ 28.213084] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 28.213112] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.213132] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 28.213449] eth0: RTL8168b/8111b at 0xf885a000, 00:1d:60:09:53:ec, XID 38000000 IRQ 219
[ 28.217352] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.269970] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[f9dfe800-f9dfefff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 28.275064] ata_piix 0000:00:1f.2: version 2.12
[ 28.275071] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 28.275101] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 20
[ 28.275136] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 28.275403] scsi0 : ata_piix
[ 28.275450] scsi1 : ata_piix
[ 28.276516] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 28.276519] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 28.439866] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[ 28.439875] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
[ 28.456845] ata1.00: configured for UDMA/100
[ 28.659963] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 28.775641] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33
[ 28.793448] usb 5-4: configuration #1 chosen from 1 choice
[ 28.946832] ata2.00: configured for UDMA/33
[ 28.946975] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 28.950736] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PR03 PQ: 0 ANSI: 5
[ 28.958752] Driver 'sd' needs updating - please use bus_type methods
[ 28.958822] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 28.958835] sd 0:0:0:0: [sda] Write Protect is off
[ 28.958837] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.958853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.958902] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 28.958912] sd 0:0:0:0: [sda] Write Protect is off
[ 28.958914] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.958930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.958934] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 28.982976] sda1 sda2 sda3
[ 28.983151] sd 0:0:0:0: [sda] Attached SCSI disk
[ 28.987918] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 28.987936] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 29.001339] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 29.001344] Uniform CD-ROM driver Revision: 3.20
[ 29.001389] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 29.159623] Attempting manual resume
[ 29.159626] swsusp: Resume From Partition 8:1
[ 29.159628] PM: Checking swsusp image.
[ 29.159807] PM: Resume from disk failed.
[ 29.172443] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 29.172446] EXT3-fs: write access will be enabled during recovery.
[ 29.397686] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 29.542756] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003a13b54]
[ 29.575792] usb 3-2: configuration #1 chosen from 1 choice
[ 29.816954] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 29.986985] usb 4-2: configuration #1 chosen from 1 choice
[ 29.990011] usbcore: registered new interface driver hiddev
[ 30.018966] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input2
[ 30.019019] input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:1d.2-2
[ 30.032032] input: USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input3
[ 30.040624] input,hidraw1: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:1d.3-2
[ 30.040650] usbcore: registered new interface driver usbhid
[ 30.040658] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 30.580359] kjournald starting. Commit interval 5 seconds
[ 30.580396] EXT3-fs: sda2: orphan cleanup on readonly fs
[ 30.580403] ext3_orphan_cleanup: deleting unreferenced inode 48590
[ 30.580424] EXT3-fs: sda2: 1 orphan inode deleted
[ 30.580426] EXT3-fs: recovery complete.
[ 30.582302] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.697570] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.733542] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.773419] Linux agpgart interface v0.102
[ 38.933235] input: Power Button (FF) as /devices/virtual/input/input4
[ 38.953083] ACPI: Power Button (FF) [PWRF]
[ 38.953197] input: Lid Switch as /devices/virtual/input/input5
[ 38.955895] ACPI: Lid Switch [LID]
[ 38.955953] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 38.985037] ACPI: Sleep Button (CM) [SLPB]
[ 38.985114] input: Power Button (CM) as /devices/virtual/input/input7
[ 39.016961] ACPI: Power Button (CM) [PWRB]
[ 39.184735] asus-laptop: Asus Laptop Support version 0.42
[ 39.185019] asus-laptop: A7C model detected
[ 39.191730] Registered led device: asus:phone
[ 39.425107] ACPI: AC Adapter [AC0] (on-line)
[ 39.559301] ACPI: Battery Slot [BAT0] (battery present)
[ 39.562421] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 39.579981] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 39.582820] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 39.611923] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 39.829471] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 39.863537] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[ 39.863576] [fglrx] ASYNCIO init succeed!
[ 39.864575] [fglrx] PAT is enabled successfully!
[ 39.864974] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 40.163048] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[ 40.163053] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 40.163166] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 40.163181] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 40.163208] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 40.238659] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.238687] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 40.268627] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[ 40.274612] iTCO_vendor_support: vendor-support=0
[ 40.310791] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 40.310885] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[ 40.310924] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 40.510393] intel_rng: FWH not detected
[ 40.523319] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 40.523322] ricoh-mmc: Copyright(c) Philip Langdale
[ 40.562435] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 40.722474] sdhci: Secure Digital Host Controller Interface driver
[ 40.722478] sdhci: Copyright(c) Pierre Ossman
[ 40.901761] irda_init()
[ 40.901781] NET: Registered protocol family 23
[ 40.976691] Linux video capture interface: v2.00
[ 41.050753] microdia: Microdia USB2.0 webcam driver startup
[ 41.050795] microdia: Camera 0C45:627F not supported.
[ 41.050812] usbcore: registered new interface driver usb_microdia_driver
[ 41.050816] microdia: v0.0.0 : Microdia USB Video Camera
[ 41.433837] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 41.477503] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 41.921301] sdhci: SDHCI controller found at 0000:01:01.1 [1180:0822] (rev 19)
[ 41.921346] ACPI: PCI Interrupt 0000:01:01.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 41.921362] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 41.921433] mmc0: SDHCI at 0xf9dff000 irq 17 DMA
[ 41.953251] ricoh-mmc: Ricoh MMC controller found at 0000:01:01.2 [1180:0843] (rev 1)
[ 41.953265] ricoh-mmc: Controller is now disabled.
[ 41.995529] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 41.996486] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[ 42.283696] lp: driver loaded but no devices found
[ 42.394674] Adding 4000020k swap on /dev/sda1. Priority:-1 extents:1 across:4000020k
[ 42.938065] EXT3 FS on sda2, internal journal
[ 63.470877] kjournald starting. Commit interval 5 seconds
[ 63.471279] EXT3 FS on sda3, internal journal
[ 63.471289] EXT3-fs: mounted filesystem with ordered data mode.
[ 63.908859] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 64.311819] No dock devices found.
[ 65.598509] apm: BIOS not found.
[ 65.792597] ppdev: user-space parallel port driver
[ 65.935105] audit(1219056344.836:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5645 profile="/usr/sbin/cupsd" namespace="default"
[ 67.302626] r8169: eth0: link down
[ 67.738797] Bluetooth: Core ver 2.11
[ 67.738959] NET: Registered protocol family 31
[ 67.738965] Bluetooth: HCI device and connection manager initialized
[ 67.738974] Bluetooth: HCI socket layer initialized
[ 67.807283] Bluetooth: L2CAP ver 2.9
[ 67.807293] Bluetooth: L2CAP socket layer initialized
[ 67.942965] Bluetooth: RFCOMM socket layer initialized
[ 67.942990] Bluetooth: RFCOMM TTY layer initialized
[ 67.942995] Bluetooth: RFCOMM ver 1.8
[ 68.780140] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 70.785811] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 70.785819] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 70.785822] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 70.868619] [fglrx] interrupt source 10000000 successfully enabled
[ 70.868628] [fglrx] enable ID = 0x00000008
[ 70.868639] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 90.952838] NET: Registered protocol family 10
[ 90.953381] lo: Disabled Privacy Extensions
[ 90.954258] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 90.955380] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 100.084197] CPU0 attaching NULL sched-domain.
[ 100.084206] CPU1 attaching NULL sched-domain.
[ 100.098920] CPU0 attaching sched-domain:
[ 100.098928] domain 0: span 03
[ 100.098933] groups: 01 02
[ 100.098942] CPU1 attaching sched-domain:
[ 100.098946] domain 0: span 03
[ 100.098951] groups: 02 01
[ 1651.633447] r8169: eth0: link up
[ 1651.637556] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1651.954521] r8169: eth0: link down
[ 1652.839428] NET: Registered protocol family 17
[ 1657.004676] r8169: eth0: link up
[ 1657.008649] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1673.770572] eth0: no IPv6 routers present
[ 3739.645407] r8169: eth0: link down
[ 3787.779914] r8169: eth0: link up
[ 3787.783914] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3802.702989] eth0: no IPv6 routers present
[ 8879.437296] [fglrx] interrupt source 10000000 successfully disabled!
[ 8879.437307] [fglrx] enable ID = 0x00000000
[ 8879.437314] [fglrx] Receive disable interrupt message with irqEnableMask: 10000000; dwIRQEnableId: 00000008
[ 8882.945059] [fglrx] PCIe has already been initialized. Reinitializing ...
[ 8882.967569] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 8882.967576] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 8882.967578] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 8883.039318] [fglrx] interrupt source 10000000 successfully enabled
[ 8883.039325] [fglrx] enable ID = 0x00000008
[ 8883.039335] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 8896.944255] CPU0 attaching NULL sched-domain.
[ 8896.944262] CPU1 attaching NULL sched-domain.
[ 8896.961964] CPU0 attaching sched-domain:
[ 8896.961970] domain 0: span 03
[ 8896.961972] groups: 01 02
[ 8896.961975] CPU1 attaching sched-domain:
[ 8896.961977] domain 0: span 03
[ 8896.961978] groups: 02 01
[ 9184.016683] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12193.812741] cheese[23913]: segfault at 00000000 eip b73e0ab0 esp bffe3ed0 error 4
[12753.522265] microdia: usb_microdia_exit: Microdia USB2.0 webcam driver shutdown
[12753.522410] usbcore: deregistering interface driver usb_microdia_driver
[12761.273362] Linux video capture interface: v2.00
[12761.278173] microdia: Microdia USB2.0 webcam driver startup
[12761.278357] microdia: Microdia USB2.0 Webcam - 0C45:627F found.
[12761.278362] microdia: Release: 0100
[12761.278364] microdia: Number of interfaces : 1
[12761.281687] microdia: Microdia USB2.0 Camera is now controlling video device /dev/video0
[12761.281909] usbcore: registered new interface driver usb_microdia_driver
[12761.282037] microdia: v0.0.0 : Microdia USB Video CameraHors ligne
#2299 Le 18/08/2008, à 16:23
- Anbreizh
Re : [Clos] Centralisation Probleme Webcam+EasyCam
Ah ! C'est oki la 
Test avec la commande 'gstreamer-properties'
"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu" Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr
Hors ligne
#2300 Le 18/08/2008, à 16:29
- ubuntu_sk
Re : [Clos] Centralisation Probleme Webcam+EasyCam
fait : dans l'onglet video j'ai mis
V4L2
USB Video Camera
mais lors du test "pipeline" :
La construction du pipeline de test pour « Video for Linux 2 (v4l2) » a échouéHors ligne