Contenu | Rechercher | Menus

Annonce

DVD, clés USB et t-shirts Ubuntu-fr disponibles sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#2326 Le 25/08/2008, à 15:56

alphacentauris

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Bonjour,

J'ai une microsoft VX-3000, qui est bien reconnue.
Cependant, si je vais à la fin dans l'option executer, on nous affiche dans cheese la fenêtre de la prise de la webcam : le problème est que l'image est si sombre qu'elle en est inexploitable (alors que sous windows je n'ai pas ce problème).

Dernière modification par alphacentauris (Le 26/08/2008, à 00:27)

Hors ligne

#2327 Le 25/08/2008, à 22:08

b52

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Bonsoir @Anbreizh,

Je viens de faire l'acquisition d'une Logitech QuickCam E 3500.

J'ai suivis la doc de:
http://blognux.free.fr/?p=27
pour l'installation : ok  wink

Apparemment, aucun drivers pour ma webcam pour le moment  sad

Bus 002 Device 003: ID 046d:09a4 Logitech, Inc.
Bus 002 Device 001: ID 0000:0000 
Bus 001 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 001 Device 001: ID 0000:0000 

Est il possible de résoudre mon problème ?

Merci  wink

Dernière modification par b52 (Le 25/08/2008, à 23:39)


Les grands bonheurs viennent du ciel, ...
Xcfa, Linux on the root, Normalisation, Ogg Vorbis

Hors ligne

#2328 Le 26/08/2008, à 00:47

madinina72

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Il m'est impossible d'installer easycam, voici le message d'erreur que j'ai :
capturejb7.png

Le résultat des commandes
sudo modprobe -r ov511
christine@christine-desktop:~$ sudo modprobe -r ov51x-jpeg
FATAL: Module ov51x_jpeg not found.
christine@christine-desktop:~$ sudo modprobe ov51x-jpeg
FATAL: Module ov51x_jpeg not found.

Ensuite le résultat de dmesg :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-19-generic (buildd@king) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 21:01:46 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[    0.000000] Command line: root=UUID=0E406134406123A5 loop=/ubuntu/disks/root.disk ro quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003bfd0000 (usable)
[    0.000000]  BIOS-e820: 000000003bfd0000 - 000000003bfde000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003bfde000 - 000000003c000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 245712) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000F93E0 checksum 0
[    0.000000] ACPI: RSDP 000F93E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 3BFD0000, 0038 (r1 A M I  OEMRSDT   8000731 MSFT       97)
[    0.000000] ACPI: FACP 3BFD0200, 0084 (r2 A M I  OEMFACP   8000731 MSFT       97)
[    0.000000] ACPI: DSDT 3BFD0440, 4395 (r1  1ADMB 1ADMB006        6 INTL 20051117)
[    0.000000] ACPI: FACS 3BFDE000, 0040
[    0.000000] ACPI: APIC 3BFD0390, 0070 (r1 A M I  OEMAPIC   8000731 MSFT       97)
[    0.000000] ACPI: MCFG 3BFD0400, 003C (r1 A M I  OEMMCFG   8000731 MSFT       97)
[    0.000000] ACPI: OEMB 3BFDE040, 0060 (r1 A M I  AMI_OEM   8000731 MSFT       97)
[    0.000000] ACPI: HPET 3BFD47E0, 0038 (r1 A M I  OEMHPET0  8000731 MSFT       97)
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] CPU has 2 num_cores
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003bfd0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 245712) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000003bfd0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   245712
[    0.000000] On node 0 totalpages: 245615
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1219 pages reserved
[    0.000000]   DMA zone: 2724 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3303 pages used for memmap
[    0.000000]   DMA32 zone: 238313 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 241037
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=0E406134406123A5 loop=/ubuntu/disks/root.disk ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   28.437938] Marking TSC unstable due to TSCs unsynchronized
[   28.437940] time.c: Detected 2210.184 MHz processor.
[   28.441100] Console: colour VGA+ 80x25
[   28.441103] console [tty0] enabled
[   28.441118] Checking aperture...
[   28.441120] CPU 0: aperture @ 272000000 size 32 MB
[   28.441122] Aperture too small (32 MB)
[   28.447040] No AGP bridge found
[   28.458531] Memory: 956180k/982848k available (2489k kernel code, 26280k reserved, 1318k data, 320k init)
[   28.458570] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   28.535856] Calibrating delay using timer specific routine.. 4424.66 BogoMIPS (lpj=8849335)
[   28.535890] Security Framework initialized
[   28.535897] SELinux:  Disabled at boot.
[   28.535911] AppArmor: AppArmor initialized
[   28.535914] Failure registering capabilities with primary security module.
[   28.536004] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   28.536807] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   28.537182] Mount-cache hash table entries: 256
[   28.537319] Initializing cgroup subsys ns
[   28.537322] Initializing cgroup subsys cpuacct
[   28.537334] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   28.537335] CPU: L2 Cache: 512K (64 bytes/line)
[   28.537338] CPU 0/0 -> Node 0
[   28.537340] CPU: Physical Processor ID: 0
[   28.537341] CPU: Processor Core ID: 0
[   28.537366] SMP alternatives: switching to UP code
[   28.537979] Early unpacking initramfs... done
[   28.836424] ACPI: Core revision 20070126
[   28.836474] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   28.879077] Using local APIC timer interrupts.
[   28.924295] APIC timer calibration result 12557863
[   28.924297] Detected 12.557 MHz APIC timer.
[   28.924392] SMP alternatives: switching to SMP code
[   28.924917] Booting processor 1/2 APIC 0x1
[   28.935197] Initializing CPU#1
[   29.012442] Calibrating delay using timer specific routine.. 4420.38 BogoMIPS (lpj=8840768)
[   29.012448] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   29.012450] CPU: L2 Cache: 512K (64 bytes/line)
[   29.012452] CPU 1/1 -> Node 0
[   29.012454] CPU: Physical Processor ID: 0
[   29.012455] CPU: Processor Core ID: 1
[   29.012553] AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[   29.012379] Brought up 2 CPUs
[   29.012485] CPU0 attaching sched-domain:
[   29.012488]  domain 0: span 03
[   29.012489]   groups: 01 02
[   29.012491]   domain 1: span 03
[   29.012493]    groups: 03
[   29.012495] CPU1 attaching sched-domain:
[   29.012496]  domain 0: span 03
[   29.012497]   groups: 02 01
[   29.012499]   domain 1: span 03
[   29.012500]    groups: 03
[   29.012726] net_namespace: 120 bytes
[   29.013110] Time: 18:21:51  Date: 08/25/08
[   29.013147] NET: Registered protocol family 16
[   29.013321] ACPI: bus type pci registered
[   29.013387] PCI: Using configuration type 1
[   29.016601] ACPI: EC: Look up EC in DSDT
[   29.020563] ACPI: Interpreter enabled
[   29.020565] ACPI: (supports S0 S1 S3 S4 S5)
[   29.020580] ACPI: Using IOAPIC for interrupt routing
[   29.020797] Error attaching device data
[   29.020802] Error attaching device data
[   29.028142] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   29.028835] PCI: Transparent bridge - 0000:00:04.0
[   29.029008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   29.029193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   29.029298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   29.029379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   29.029456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   29.035855] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[   29.036028] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
[   29.036199] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[   29.036410] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[   29.036580] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[   29.036750] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[   29.036919] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[   29.037088] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[   29.037258] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   29.037428] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[   29.037597] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[   29.037767] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[   29.037937] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[   29.038107] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
[   29.038276] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   29.038451] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[   29.038621] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[   29.038790] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[   29.038992] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[   29.039147] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  B5, should be B0 [20070126]
[   29.039153] Linux Plug and Play Support v0.97 (c) Adam Belay
[   29.039180] pnp: PnP ACPI init
[   29.039188] ACPI: bus type pnp registered
[   29.043468] pnp: PnP ACPI: found 15 devices
[   29.043471] ACPI: ACPI bus type pnp unregistered
[   29.043685] PCI: Using ACPI for IRQ routing
[   29.043688] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   29.052257] NET: Registered protocol family 8
[   29.052258] NET: Registered protocol family 20
[   29.052338] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[   29.052342] hpet0: 3 32-bit timers, 25000000 Hz
[   29.053396] AppArmor: AppArmor Filesystem Enabled
[   29.056216] Time: hpet clocksource has been installed.
[   29.056228] Switched to high resolution mode on CPU 0
[   29.056549] Switched to high resolution mode on CPU 1
[   29.064217] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[   29.064220] system 00:07: ioport range 0x800-0x80f has been reserved
[   29.064223] system 00:07: ioport range 0x4000-0x407f has been reserved
[   29.064226] system 00:07: ioport range 0x4080-0x40ff has been reserved
[   29.064228] system 00:07: ioport range 0x4400-0x447f has been reserved
[   29.064231] system 00:07: ioport range 0x4480-0x44ff has been reserved
[   29.064234] system 00:07: ioport range 0x4800-0x487f has been reserved
[   29.064236] system 00:07: ioport range 0x4880-0x48ff has been reserved
[   29.064239] system 00:07: ioport range 0x2000-0x207f has been reserved
[   29.064242] system 00:07: ioport range 0x2080-0x20ff has been reserved
[   29.064245] system 00:07: iomem range 0x0-0x0 could not be reserved
[   29.064248] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[   29.064251] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[   29.064253] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
[   29.064256] system 00:07: iomem range 0xffb80000-0xffffffff could not be reserved
[   29.064263] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[   29.064266] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[   29.064273] system 00:0c: ioport range 0xa00-0xadf has been reserved
[   29.064276] system 00:0c: ioport range 0xae0-0xaef has been reserved
[   29.064283] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[   29.064290] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[   29.064292] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[   29.064295] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[   29.064298] system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
[   29.064301] system 00:0e: iomem range 0x0-0x0 could not be reserved
[   29.064656] PCI: Bridge: 0000:00:04.0
[   29.064658]   IO window: e000-efff
[   29.064661]   MEM window: dff00000-dfffffff
[   29.064663]   PREFETCH window: disabled.
[   29.064666] PCI: Bridge: 0000:00:09.0
[   29.064667]   IO window: disabled.
[   29.064668]   MEM window: disabled.
[   29.064670]   PREFETCH window: disabled.
[   29.064672] PCI: Bridge: 0000:00:0b.0
[   29.064673]   IO window: disabled.
[   29.064674]   MEM window: disabled.
[   29.064676]   PREFETCH window: disabled.
[   29.064678] PCI: Bridge: 0000:00:0c.0
[   29.064679]   IO window: disabled.
[   29.064680]   MEM window: disabled.
[   29.064682]   PREFETCH window: disabled.
[   29.064691] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   29.064701] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   29.064707] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   29.064712] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   29.064757] NET: Registered protocol family 2
[   29.100248] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   29.100706] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[   29.102342] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   29.103120] TCP: Hash tables configured (established 131072 bind 65536)
[   29.103124] TCP reno registered
[   29.112299] checking if image is initramfs... it is
[   29.686946] Freeing initrd memory: 7791k freed
[   29.693526] audit: initializing netlink socket (disabled)
[   29.693539] audit(1219688511.216:1): initialized
[   29.695283] VFS: Disk quotas dquot_6.5.1
[   29.695354] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   29.695476] io scheduler noop registered
[   29.695478] io scheduler anticipatory registered
[   29.695480] io scheduler deadline registered
[   29.695574] io scheduler cfq registered (default)
[   29.695604] pci 0000:00:00.0: Enabling HT MSI Mapping
[   29.720190] pci 0000:00:04.0: Enabling HT MSI Mapping
[   29.720208] pci 0000:00:05.0: Enabling HT MSI Mapping
[   29.720232] pci 0000:00:07.0: Enabling HT MSI Mapping
[   29.720244] pci 0000:00:08.0: Enabling HT MSI Mapping
[   29.720256] pci 0000:00:09.0: Enabling HT MSI Mapping
[   29.720269] pci 0000:00:0b.0: Enabling HT MSI Mapping
[   29.720281] pci 0000:00:0c.0: Enabling HT MSI Mapping
[   29.720293] Boot video device is 0000:00:0d.0
[   29.720451] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   29.720470] assign_interrupt_mode Found MSI capability
[   29.720488] Allocate Port Service[0000:00:09.0:pcie00]
[   29.720544] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   29.720563] assign_interrupt_mode Found MSI capability
[   29.720576] Allocate Port Service[0000:00:0b.0:pcie00]
[   29.720625] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   29.720644] assign_interrupt_mode Found MSI capability
[   29.720657] Allocate Port Service[0000:00:0c.0:pcie00]
[   29.745852] Real Time Clock Driver v1.12ac
[   29.746029] hpet_resources: 0xfeff0000 is busy
[   29.746067] Linux agpgart interface v0.102
[   29.746069] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   29.746258] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   29.746714] 00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   29.747369] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   29.747427] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   29.747512] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   29.749799] serio: i8042 KBD port at 0x60,0x64 irq 1
[   29.749808] serio: i8042 AUX port at 0x60,0x64 irq 12
[   29.764981] mice: PS/2 mouse device common for all mice
[   29.765023] cpuidle: using governor ladder
[   29.765025] cpuidle: using governor menu
[   29.765152] NET: Registered protocol family 1
[   29.765253] registered taskstats version 1
[   29.765356]   Magic number: 4:623:393
[   29.765475] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   29.765478] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   29.765479] EDD information not available.
[   29.765491] Freeing unused kernel memory: 320k freed
[   29.799901] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   30.956751] fuse init (API version 7.9)
[   31.283580] usbcore: registered new interface driver usbfs
[   31.283602] usbcore: registered new interface driver hub
[   31.286154] usbcore: registered new device driver usb
[   31.291124] SCSI subsystem initialized
[   31.301537] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[   31.301550] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23
[   31.301745] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   31.301754] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   31.302008] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   31.302040] ehci_hcd 0000:00:02.1: debug port 1
[   31.302044] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   31.302054] ehci_hcd 0000:00:02.1: irq 23, io mem 0xdfefac00
[   31.302137] libata version 3.00 loaded.
[   31.310446] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   31.311837] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   31.311972] usb usb1: configuration #1 chosen from 1 choice
[   31.311992] hub 1-0:1.0: USB hub found
[   31.312001] hub 1-0:1.0: 8 ports detected
[   31.415961] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[   31.415976] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22
[   31.416199] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   31.416206] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   31.416269] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[   31.416290] ohci_hcd 0000:00:02.0: irq 22, io mem 0xdfefb000
[   31.472583] usb usb2: configuration #1 chosen from 1 choice
[   31.472608] hub 2-0:1.0: USB hub found
[   31.472615] hub 2-0:1.0: 8 ports detected
[   31.574632] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[   31.574938] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[   31.574949] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21
[   31.574954] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   32.094451] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:1d:92:62:39:58
[   32.094456] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
[   32.094859] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   32.095160] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[   32.095170] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20
[   32.095186] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   32.095192] ACPI: PCI interrupt for device 0000:00:08.0 disabled
[   32.098383] pata_amd 0000:00:06.0: version 0.3.10
[   32.098444] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   32.101046] scsi0 : pata_amd
[   32.101181] scsi1 : pata_amd
[   32.102162] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   32.102165] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   32.197951] usb 2-1: new full speed USB device using ohci_hcd and address 2
[   32.410175] usb 2-1: configuration #1 chosen from 1 choice
[   32.591149] ata1.00: ATAPI: ATAPI CD-RW 52XMax, V1.0, max UDMA/33
[   32.591165] ata1.01: ATAPI: IDE/ATAPI CD-ROM 50XS, T5A6, max UDMA/33
[   32.713790] usb 2-2: new full speed USB device using ohci_hcd and address 3
[   32.761967] ata1.00: configured for UDMA/33
[   32.934876] ata1.01: configured for UDMA/33
[   32.934915] ata2: port disabled. ignoring.
[   32.935221] scsi 0:0:0:0: CD-ROM            ATAPI    CD-RW52XMAX      1.0  PQ: 0 ANSI: 5
[   32.935516] scsi 0:0:1:0: CD-ROM            ATAPI    CD-ROM 50X       T5A6 PQ: 0 ANSI: 5
[   32.937370] sata_nv 0000:00:08.0: version 3.5
[   32.937383] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20
[   32.937620] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   32.937839] scsi2 : sata_nv
[   32.937888] scsi3 : sata_nv
[   32.938030] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20
[   32.938032] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20
[   32.943787] usb 2-2: configuration #1 chosen from 1 choice
[   33.405300] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   33.413547] ata3.00: ATA-8: Hitachi HDP725025GLA380, GM2OA52A, max UDMA/133
[   33.413549] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   33.430546] ata3.00: configured for UDMA/133
[   33.742048] ata4: SATA link down (SStatus 0 SControl 300)
[   33.752944] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
[   33.759985] Driver 'sr' needs updating - please use bus_type methods
[   33.762546] sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[   33.762553] Uniform CD-ROM driver Revision: 3.20
[   33.762608] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   33.766589] sr1: scsi3-mmc drive: 0x/11x cd/rw xa/form2 cdda tray
[   33.766683] sr 0:0:1:0: Attached scsi CD-ROM sr1
[   33.766579] Driver 'sd' needs updating - please use bus_type methods
[   33.766882] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   33.766893] sd 2:0:0:0: [sda] Write Protect is off
[   33.766895] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   33.766908] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   33.766951] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   33.766959] sd 2:0:0:0: [sda] Write Protect is off
[   33.766961] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   33.766972] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   33.766975]  sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[   33.770473] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   33.770491] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   33.778821]  sda1
[   33.778904] sd 2:0:0:0: [sda] Attached SCSI disk
[   34.363445] loop: module loaded
[   34.388451] kjournald starting.  Commit interval 5 seconds
[   34.388464] EXT3-fs: mounted filesystem with ordered data mode.
[   40.073717] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   40.204542] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   40.236536] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   40.305365] parport_pc 00:06: reported by Plug and Play ACPI
[   40.305415] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   40.372345] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[   40.372364] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
[   40.396474] input: Power Button (FF) as /devices/virtual/input/input3
[   40.445271] ACPI: Power Button (FF) [PWRF]
[   40.445352] input: Power Button (CM) as /devices/virtual/input/input4
[   40.509240] ACPI: Power Button (CM) [PWRB]
[   40.919389] eth0: no link during initialization.
[   40.997295] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[   40.997302] ACPI: PCI Interrupt 0000:00:05.0[b] -> Link [LAZA] -> GSI 23 (level, low) -> IRQ 23
[   40.997534] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   41.038388] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   41.161705] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[   41.161718] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 19
[   41.240550] usbcore: registered new interface driver snd-usb-audio
[   41.321179] ATM dev 0: ADSL state: running
[   41.321184] ATM dev 0: ADSL line: up (608 kb/s down | 160 kb/s up)
[   41.321220] usbcore: registered new interface driver cxacru
[   41.410650] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   42.159982] NET: Registered protocol family 17
[   43.082834] lp0: using parport0 (interrupt-driven).
[   43.750150] EXT3 FS on loop0, internal journal
[   51.281547] Adding 976552k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:976552k
[   51.660218] ip_tables: (C) 2000-2006 Netfilter Core Team
[   51.997150] No dock devices found.
[   52.283046] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
[   52.283373] powernow-k8: MP systems not supported by PSB BIOS structure
[   52.283094] powernow-k8: MP systems not supported by PSB BIOS structure
[   53.144483] ppdev: user-space parallel port driver
[   53.281033] audit(1219702935.306:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5124 profile="/usr/sbin/cupsd" namespace="default"
[   54.034200] Bluetooth: Core ver 2.11
[   54.034823] NET: Registered protocol family 31
[   54.034828] Bluetooth: HCI device and connection manager initialized
[   54.034833] Bluetooth: HCI socket layer initialized
[   54.052334] Bluetooth: L2CAP ver 2.9
[   54.052338] Bluetooth: L2CAP socket layer initialized
[   54.092514] Bluetooth: RFCOMM socket layer initialized
[   54.092535] Bluetooth: RFCOMM TTY layer initialized
[   54.092537] Bluetooth: RFCOMM ver 1.8
[   84.011765] NET: Registered protocol family 10
[   84.011986] lo: Disabled Privacy Extensions
[   84.012413] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  103.551515] PPP generic driver version 2.4.2
[  107.552346] PPP BSD Compression module registered
[  107.606249] PPP Deflate Compression module registered
[  118.729628] npviewer.bin[6052]: segfault at f5b4d030 rip f7941540 rsp ffede13c error 4


Merci smile

Hors ligne

#2329 Le 26/08/2008, à 00:50

madinina72

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Il m'est impossible d'installer easycam, voici le message d'erreur que j'ai :
capturejb7.png

Le résultat des commandes
sudo modprobe -r ov511
christine@christine-desktop:~$ sudo modprobe -r ov51x-jpeg
FATAL: Module ov51x_jpeg not found.
christine@christine-desktop:~$ sudo modprobe ov51x-jpeg
FATAL: Module ov51x_jpeg not found.

Ensuite le résultat de dmesg :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-19-generic (buildd@king) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 21:01:46 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[    0.000000] Command line: root=UUID=0E406134406123A5 loop=/ubuntu/disks/root.disk ro quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003bfd0000 (usable)
[    0.000000]  BIOS-e820: 000000003bfd0000 - 000000003bfde000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003bfde000 - 000000003c000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 245712) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000F93E0 checksum 0
[    0.000000] ACPI: RSDP 000F93E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 3BFD0000, 0038 (r1 A M I  OEMRSDT   8000731 MSFT       97)
[    0.000000] ACPI: FACP 3BFD0200, 0084 (r2 A M I  OEMFACP   8000731 MSFT       97)
[    0.000000] ACPI: DSDT 3BFD0440, 4395 (r1  1ADMB 1ADMB006        6 INTL 20051117)
[    0.000000] ACPI: FACS 3BFDE000, 0040
[    0.000000] ACPI: APIC 3BFD0390, 0070 (r1 A M I  OEMAPIC   8000731 MSFT       97)
[    0.000000] ACPI: MCFG 3BFD0400, 003C (r1 A M I  OEMMCFG   8000731 MSFT       97)
[    0.000000] ACPI: OEMB 3BFDE040, 0060 (r1 A M I  AMI_OEM   8000731 MSFT       97)
[    0.000000] ACPI: HPET 3BFD47E0, 0038 (r1 A M I  OEMHPET0  8000731 MSFT       97)
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] CPU has 2 num_cores
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003bfd0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 245712) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000003bfd0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   245712
[    0.000000] On node 0 totalpages: 245615
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1219 pages reserved
[    0.000000]   DMA zone: 2724 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3303 pages used for memmap
[    0.000000]   DMA32 zone: 238313 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 241037
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=0E406134406123A5 loop=/ubuntu/disks/root.disk ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   28.437938] Marking TSC unstable due to TSCs unsynchronized
[   28.437940] time.c: Detected 2210.184 MHz processor.
[   28.441100] Console: colour VGA+ 80x25
[   28.441103] console [tty0] enabled
[   28.441118] Checking aperture...
[   28.441120] CPU 0: aperture @ 272000000 size 32 MB
[   28.441122] Aperture too small (32 MB)
[   28.447040] No AGP bridge found
[   28.458531] Memory: 956180k/982848k available (2489k kernel code, 26280k reserved, 1318k data, 320k init)
[   28.458570] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   28.535856] Calibrating delay using timer specific routine.. 4424.66 BogoMIPS (lpj=8849335)
[   28.535890] Security Framework initialized
[   28.535897] SELinux:  Disabled at boot.
[   28.535911] AppArmor: AppArmor initialized
[   28.535914] Failure registering capabilities with primary security module.
[   28.536004] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   28.536807] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   28.537182] Mount-cache hash table entries: 256
[   28.537319] Initializing cgroup subsys ns
[   28.537322] Initializing cgroup subsys cpuacct
[   28.537334] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   28.537335] CPU: L2 Cache: 512K (64 bytes/line)
[   28.537338] CPU 0/0 -> Node 0
[   28.537340] CPU: Physical Processor ID: 0
[   28.537341] CPU: Processor Core ID: 0
[   28.537366] SMP alternatives: switching to UP code
[   28.537979] Early unpacking initramfs... done
[   28.836424] ACPI: Core revision 20070126
[   28.836474] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   28.879077] Using local APIC timer interrupts.
[   28.924295] APIC timer calibration result 12557863
[   28.924297] Detected 12.557 MHz APIC timer.
[   28.924392] SMP alternatives: switching to SMP code
[   28.924917] Booting processor 1/2 APIC 0x1
[   28.935197] Initializing CPU#1
[   29.012442] Calibrating delay using timer specific routine.. 4420.38 BogoMIPS (lpj=8840768)
[   29.012448] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   29.012450] CPU: L2 Cache: 512K (64 bytes/line)
[   29.012452] CPU 1/1 -> Node 0
[   29.012454] CPU: Physical Processor ID: 0
[   29.012455] CPU: Processor Core ID: 1
[   29.012553] AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[   29.012379] Brought up 2 CPUs
[   29.012485] CPU0 attaching sched-domain:
[   29.012488]  domain 0: span 03
[   29.012489]   groups: 01 02
[   29.012491]   domain 1: span 03
[   29.012493]    groups: 03
[   29.012495] CPU1 attaching sched-domain:
[   29.012496]  domain 0: span 03
[   29.012497]   groups: 02 01
[   29.012499]   domain 1: span 03
[   29.012500]    groups: 03
[   29.012726] net_namespace: 120 bytes
[   29.013110] Time: 18:21:51  Date: 08/25/08
[   29.013147] NET: Registered protocol family 16
[   29.013321] ACPI: bus type pci registered
[   29.013387] PCI: Using configuration type 1
[   29.016601] ACPI: EC: Look up EC in DSDT
[   29.020563] ACPI: Interpreter enabled
[   29.020565] ACPI: (supports S0 S1 S3 S4 S5)
[   29.020580] ACPI: Using IOAPIC for interrupt routing
[   29.020797] Error attaching device data
[   29.020802] Error attaching device data
[   29.028142] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   29.028835] PCI: Transparent bridge - 0000:00:04.0
[   29.029008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   29.029193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   29.029298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   29.029379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   29.029456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   29.035855] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[   29.036028] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
[   29.036199] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[   29.036410] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[   29.036580] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[   29.036750] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[   29.036919] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[   29.037088] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[   29.037258] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   29.037428] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[   29.037597] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[   29.037767] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[   29.037937] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[   29.038107] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
[   29.038276] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   29.038451] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[   29.038621] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[   29.038790] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[   29.038992] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[   29.039147] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  B5, should be B0 [20070126]
[   29.039153] Linux Plug and Play Support v0.97 (c) Adam Belay
[   29.039180] pnp: PnP ACPI init
[   29.039188] ACPI: bus type pnp registered
[   29.043468] pnp: PnP ACPI: found 15 devices
[   29.043471] ACPI: ACPI bus type pnp unregistered
[   29.043685] PCI: Using ACPI for IRQ routing
[   29.043688] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   29.052257] NET: Registered protocol family 8
[   29.052258] NET: Registered protocol family 20
[   29.052338] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[   29.052342] hpet0: 3 32-bit timers, 25000000 Hz
[   29.053396] AppArmor: AppArmor Filesystem Enabled
[   29.056216] Time: hpet clocksource has been installed.
[   29.056228] Switched to high resolution mode on CPU 0
[   29.056549] Switched to high resolution mode on CPU 1
[   29.064217] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[   29.064220] system 00:07: ioport range 0x800-0x80f has been reserved
[   29.064223] system 00:07: ioport range 0x4000-0x407f has been reserved
[   29.064226] system 00:07: ioport range 0x4080-0x40ff has been reserved
[   29.064228] system 00:07: ioport range 0x4400-0x447f has been reserved
[   29.064231] system 00:07: ioport range 0x4480-0x44ff has been reserved
[   29.064234] system 00:07: ioport range 0x4800-0x487f has been reserved
[   29.064236] system 00:07: ioport range 0x4880-0x48ff has been reserved
[   29.064239] system 00:07: ioport range 0x2000-0x207f has been reserved
[   29.064242] system 00:07: ioport range 0x2080-0x20ff has been reserved
[   29.064245] system 00:07: iomem range 0x0-0x0 could not be reserved
[   29.064248] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[   29.064251] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[   29.064253] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
[   29.064256] system 00:07: iomem range 0xffb80000-0xffffffff could not be reserved
[   29.064263] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[   29.064266] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[   29.064273] system 00:0c: ioport range 0xa00-0xadf has been reserved
[   29.064276] system 00:0c: ioport range 0xae0-0xaef has been reserved
[   29.064283] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[   29.064290] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[   29.064292] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[   29.064295] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[   29.064298] system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
[   29.064301] system 00:0e: iomem range 0x0-0x0 could not be reserved
[   29.064656] PCI: Bridge: 0000:00:04.0
[   29.064658]   IO window: e000-efff
[   29.064661]   MEM window: dff00000-dfffffff
[   29.064663]   PREFETCH window: disabled.
[   29.064666] PCI: Bridge: 0000:00:09.0
[   29.064667]   IO window: disabled.
[   29.064668]   MEM window: disabled.
[   29.064670]   PREFETCH window: disabled.
[   29.064672] PCI: Bridge: 0000:00:0b.0
[   29.064673]   IO window: disabled.
[   29.064674]   MEM window: disabled.
[   29.064676]   PREFETCH window: disabled.
[   29.064678] PCI: Bridge: 0000:00:0c.0
[   29.064679]   IO window: disabled.
[   29.064680]   MEM window: disabled.
[   29.064682]   PREFETCH window: disabled.
[   29.064691] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   29.064701] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   29.064707] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   29.064712] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   29.064757] NET: Registered protocol family 2
[   29.100248] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   29.100706] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[   29.102342] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   29.103120] TCP: Hash tables configured (established 131072 bind 65536)
[   29.103124] TCP reno registered
[   29.112299] checking if image is initramfs... it is
[   29.686946] Freeing initrd memory: 7791k freed
[   29.693526] audit: initializing netlink socket (disabled)
[   29.693539] audit(1219688511.216:1): initialized
[   29.695283] VFS: Disk quotas dquot_6.5.1
[   29.695354] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   29.695476] io scheduler noop registered
[   29.695478] io scheduler anticipatory registered
[   29.695480] io scheduler deadline registered
[   29.695574] io scheduler cfq registered (default)
[   29.695604] pci 0000:00:00.0: Enabling HT MSI Mapping
[   29.720190] pci 0000:00:04.0: Enabling HT MSI Mapping
[   29.720208] pci 0000:00:05.0: Enabling HT MSI Mapping
[   29.720232] pci 0000:00:07.0: Enabling HT MSI Mapping
[   29.720244] pci 0000:00:08.0: Enabling HT MSI Mapping
[   29.720256] pci 0000:00:09.0: Enabling HT MSI Mapping
[   29.720269] pci 0000:00:0b.0: Enabling HT MSI Mapping
[   29.720281] pci 0000:00:0c.0: Enabling HT MSI Mapping
[   29.720293] Boot video device is 0000:00:0d.0
[   29.720451] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   29.720470] assign_interrupt_mode Found MSI capability
[   29.720488] Allocate Port Service[0000:00:09.0:pcie00]
[   29.720544] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   29.720563] assign_interrupt_mode Found MSI capability
[   29.720576] Allocate Port Service[0000:00:0b.0:pcie00]
[   29.720625] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   29.720644] assign_interrupt_mode Found MSI capability
[   29.720657] Allocate Port Service[0000:00:0c.0:pcie00]
[   29.745852] Real Time Clock Driver v1.12ac
[   29.746029] hpet_resources: 0xfeff0000 is busy
[   29.746067] Linux agpgart interface v0.102
[   29.746069] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   29.746258] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   29.746714] 00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   29.747369] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   29.747427] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   29.747512] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   29.749799] serio: i8042 KBD port at 0x60,0x64 irq 1
[   29.749808] serio: i8042 AUX port at 0x60,0x64 irq 12
[   29.764981] mice: PS/2 mouse device common for all mice
[   29.765023] cpuidle: using governor ladder
[   29.765025] cpuidle: using governor menu
[   29.765152] NET: Registered protocol family 1
[   29.765253] registered taskstats version 1
[   29.765356]   Magic number: 4:623:393
[   29.765475] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   29.765478] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   29.765479] EDD information not available.
[   29.765491] Freeing unused kernel memory: 320k freed
[   29.799901] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   30.956751] fuse init (API version 7.9)
[   31.283580] usbcore: registered new interface driver usbfs
[   31.283602] usbcore: registered new interface driver hub
[   31.286154] usbcore: registered new device driver usb
[   31.291124] SCSI subsystem initialized
[   31.301537] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[   31.301550] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23
[   31.301745] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   31.301754] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   31.302008] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   31.302040] ehci_hcd 0000:00:02.1: debug port 1
[   31.302044] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   31.302054] ehci_hcd 0000:00:02.1: irq 23, io mem 0xdfefac00
[   31.302137] libata version 3.00 loaded.
[   31.310446] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   31.311837] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   31.311972] usb usb1: configuration #1 chosen from 1 choice
[   31.311992] hub 1-0:1.0: USB hub found
[   31.312001] hub 1-0:1.0: 8 ports detected
[   31.415961] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[   31.415976] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22
[   31.416199] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   31.416206] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   31.416269] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[   31.416290] ohci_hcd 0000:00:02.0: irq 22, io mem 0xdfefb000
[   31.472583] usb usb2: configuration #1 chosen from 1 choice
[   31.472608] hub 2-0:1.0: USB hub found
[   31.472615] hub 2-0:1.0: 8 ports detected
[   31.574632] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[   31.574938] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[   31.574949] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21
[   31.574954] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   32.094451] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:1d:92:62:39:58
[   32.094456] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
[   32.094859] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   32.095160] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[   32.095170] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20
[   32.095186] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   32.095192] ACPI: PCI interrupt for device 0000:00:08.0 disabled
[   32.098383] pata_amd 0000:00:06.0: version 0.3.10
[   32.098444] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   32.101046] scsi0 : pata_amd
[   32.101181] scsi1 : pata_amd
[   32.102162] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   32.102165] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   32.197951] usb 2-1: new full speed USB device using ohci_hcd and address 2
[   32.410175] usb 2-1: configuration #1 chosen from 1 choice
[   32.591149] ata1.00: ATAPI: ATAPI CD-RW 52XMax, V1.0, max UDMA/33
[   32.591165] ata1.01: ATAPI: IDE/ATAPI CD-ROM 50XS, T5A6, max UDMA/33
[   32.713790] usb 2-2: new full speed USB device using ohci_hcd and address 3
[   32.761967] ata1.00: configured for UDMA/33
[   32.934876] ata1.01: configured for UDMA/33
[   32.934915] ata2: port disabled. ignoring.
[   32.935221] scsi 0:0:0:0: CD-ROM            ATAPI    CD-RW52XMAX      1.0  PQ: 0 ANSI: 5
[   32.935516] scsi 0:0:1:0: CD-ROM            ATAPI    CD-ROM 50X       T5A6 PQ: 0 ANSI: 5
[   32.937370] sata_nv 0000:00:08.0: version 3.5
[   32.937383] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20
[   32.937620] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   32.937839] scsi2 : sata_nv
[   32.937888] scsi3 : sata_nv
[   32.938030] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20
[   32.938032] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20
[   32.943787] usb 2-2: configuration #1 chosen from 1 choice
[   33.405300] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   33.413547] ata3.00: ATA-8: Hitachi HDP725025GLA380, GM2OA52A, max UDMA/133
[   33.413549] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   33.430546] ata3.00: configured for UDMA/133
[   33.742048] ata4: SATA link down (SStatus 0 SControl 300)
[   33.752944] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
[   33.759985] Driver 'sr' needs updating - please use bus_type methods
[   33.762546] sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[   33.762553] Uniform CD-ROM driver Revision: 3.20
[   33.762608] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   33.766589] sr1: scsi3-mmc drive: 0x/11x cd/rw xa/form2 cdda tray
[   33.766683] sr 0:0:1:0: Attached scsi CD-ROM sr1
[   33.766579] Driver 'sd' needs updating - please use bus_type methods
[   33.766882] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   33.766893] sd 2:0:0:0: [sda] Write Protect is off
[   33.766895] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   33.766908] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   33.766951] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   33.766959] sd 2:0:0:0: [sda] Write Protect is off
[   33.766961] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   33.766972] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   33.766975]  sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[   33.770473] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   33.770491] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   33.778821]  sda1
[   33.778904] sd 2:0:0:0: [sda] Attached SCSI disk
[   34.363445] loop: module loaded
[   34.388451] kjournald starting.  Commit interval 5 seconds
[   34.388464] EXT3-fs: mounted filesystem with ordered data mode.
[   40.073717] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   40.204542] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   40.236536] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   40.305365] parport_pc 00:06: reported by Plug and Play ACPI
[   40.305415] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   40.372345] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[   40.372364] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
[   40.396474] input: Power Button (FF) as /devices/virtual/input/input3
[   40.445271] ACPI: Power Button (FF) [PWRF]
[   40.445352] input: Power Button (CM) as /devices/virtual/input/input4
[   40.509240] ACPI: Power Button (CM) [PWRB]
[   40.919389] eth0: no link during initialization.
[   40.997295] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[   40.997302] ACPI: PCI Interrupt 0000:00:05.0[b] -> Link [LAZA] -> GSI 23 (level, low) -> IRQ 23
[   40.997534] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   41.038388] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   41.161705] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[   41.161718] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 19
[   41.240550] usbcore: registered new interface driver snd-usb-audio
[   41.321179] ATM dev 0: ADSL state: running
[   41.321184] ATM dev 0: ADSL line: up (608 kb/s down | 160 kb/s up)
[   41.321220] usbcore: registered new interface driver cxacru
[   41.410650] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   42.159982] NET: Registered protocol family 17
[   43.082834] lp0: using parport0 (interrupt-driven).
[   43.750150] EXT3 FS on loop0, internal journal
[   51.281547] Adding 976552k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:976552k
[   51.660218] ip_tables: (C) 2000-2006 Netfilter Core Team
[   51.997150] No dock devices found.
[   52.283046] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
[   52.283373] powernow-k8: MP systems not supported by PSB BIOS structure
[   52.283094] powernow-k8: MP systems not supported by PSB BIOS structure
[   53.144483] ppdev: user-space parallel port driver
[   53.281033] audit(1219702935.306:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5124 profile="/usr/sbin/cupsd" namespace="default"
[   54.034200] Bluetooth: Core ver 2.11
[   54.034823] NET: Registered protocol family 31
[   54.034828] Bluetooth: HCI device and connection manager initialized
[   54.034833] Bluetooth: HCI socket layer initialized
[   54.052334] Bluetooth: L2CAP ver 2.9
[   54.052338] Bluetooth: L2CAP socket layer initialized
[   54.092514] Bluetooth: RFCOMM socket layer initialized
[   54.092535] Bluetooth: RFCOMM TTY layer initialized
[   54.092537] Bluetooth: RFCOMM ver 1.8
[   84.011765] NET: Registered protocol family 10
[   84.011986] lo: Disabled Privacy Extensions
[   84.012413] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  103.551515] PPP generic driver version 2.4.2
[  107.552346] PPP BSD Compression module registered
[  107.606249] PPP Deflate Compression module registered
[  118.729628] npviewer.bin[6052]: segfault at f5b4d030 rip f7941540 rsp ffede13c error 4


Merci smile

Hors ligne

#2330 Le 26/08/2008, à 09:54

Anbreizh

Re : [Clos] Centralisation Probleme Webcam+EasyCam

http://blognux.free.fr/?p=27


"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu"     Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr

Hors ligne

#2331 Le 26/08/2008, à 14:54

madinina72

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Merci Anbreizh, j'essaie d'installer et te tiens au courant.
Excuse si je prends du temps à répondre, j'ai 6 h de décalage horaire de plus depuis 2 jours j'ai du mal a accéder au site (503 service unavailable)

Dernière modification par madinina72 (Le 26/08/2008, à 16:13)

Hors ligne

#2332 Le 26/08/2008, à 16:04

Anbreizh

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Pour lancer EasyCam en ligne de commande :

sudo python /usr/share/EasyCam2/core.py -g (pour gnome)
sudo python /usr/share/EasyCam2/core.py -q (pour kde)


"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu"     Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr

Hors ligne

#2333 Le 26/08/2008, à 16:22

madinina72

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Merci, j'ai donc lancé easycam, installé les drivers... Ensuite Cheese s'est ouvert, la cam fonctionne, mais 10 secondes plus tard la fenêtre devient noire. En essayant de la déplace,r elle s'est mise à clignoter !:o

Edit : Par contre, ça fonctionne dans VLC et dans aMSN

Je te remercie beaucoup smile

Dernière modification par madinina72 (Le 26/08/2008, à 16:28)

Hors ligne

#2334 Le 27/08/2008, à 22:40

Kedoc

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Anbreizh a écrit :

Execute un :

sudo modprobe -r ov511
sudo modprobe -r ov51x
sudo rm -f /lib/modules/`uname -r`/kernel/drivers/media/video/ov511.ko

Débranche ta webcam, rebranche là et teste avec 'gstreamer-properties'

J'ai exactement suivi ta procédure...

kedoc@compaq-laptop:~$ sudo modprobe -r ov511
[sudo] password for kedoc: 
kedoc@compaq-laptop:~$ sudo modprobe -r ov51x
FATAL: Module ov51x not found.
kedoc@compaq-laptop:~$ sudo rm -f /lib/modules/`uname -r`/kernel/drivers/media/video/ov511.ko
kedoc@compaq-laptop:~$ gstreamer-properties 
gstreamer-properties-Message: Skipping unavailable plugin 'artsdsink'
gstreamer-properties-Message: Skipping unavailable plugin 'esdsink'
gstreamer-properties-Message: Skipping unavailable plugin 'sdlvideosink'
gstreamer-properties-Message: Skipping unavailable plugin 'v4lmjpegsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'qcamsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'esdmon'
gstreamer-properties-Message: Error running pipeline 'Video for Linux 2 (v4l2)': Erreur d'obtention des capacités pour le périphérique « /dev/video0 » : ce n'est pas un pilote v4l2. Vérifiez si c'est un pilote v4l1. [v4l2_calls.c(85): gst_v4l2_get_capabilities (): /pipeline0/v4l2src3:
system error: Argument invalide]

Là, en me plaçant sur v4l, g bien vu le nom de ma cam s'afficher dans les sources. J'ai fait test, mais une fenêtre très petite s'est affiché avec des couleurs qui changeaient très vite. J'en déduis donc que Linux récupère bien qqc de ma webcam mais n'arrive pas à l'interpréter...

Pour info, après l'opération :

[ 4179.861779] usb 2-1: USB disconnect, address 2
[ 4181.680224] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 4181.867412] usb 2-1: configuration #1 chosen from 1 choice
[ 4181.876327] /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg-core.c: USB OV518 video device found
[ 4181.878267] /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg-core.c: Device revision 1
[ 4181.890245] /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg-core.c: Compression required with OV518...enabling
[ 4184.075334] /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg-core.c: Sensor is an OV66308AF
[ 4184.450892] /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg-core.c: Device at usb-0000:00:1d.1-1 registered to minor 0
[ 4184.451187] usbcore: registered new interface driver ov511
[ 4184.451192] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/ov511/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver

Kedoc

Hors ligne

#2335 Le 28/08/2008, à 19:55

abourayan

Re : [Clos] Centralisation Probleme Webcam+EasyCam

bonjour voila je viens de recevoir une webcam philipsspc230nc mais impossible de l'installer sur linux  comme il m'est impossible d'installer easycam2 quand je tape le code:deb http://blognux.free.fr/ubuntu hardy main
ca me dit commande introuvable apres quand je tape sudo apt-get update j'ai le resultat suivant:
tahar@tahar-hp:~$ sudo apt-get update
Atteint http://security.ubuntu.com hardy-security Release.gpg
Ign http://security.ubuntu.com hardy-security/main Translation-fr     
Atteint http://fr.archive.ubuntu.com hardy Release.gpg                 
Ign http://security.ubuntu.com hardy-security/restricted Translation-fr       
Ign http://security.ubuntu.com hardy-security/universe Translation-fr         
Ign http://security.ubuntu.com hardy-security/multiverse Translation-fr       
Atteint http://security.ubuntu.com hardy-security Release                     
Atteint http://fr.archive.ubuntu.com hardy/main Translation-fr                 
Atteint http://security.ubuntu.com hardy-security/main Packages               
Atteint http://security.ubuntu.com hardy-security/restricted Packages         
Atteint http://security.ubuntu.com hardy-security/main Sources         
Atteint http://security.ubuntu.com hardy-security/restricted Sources   
Atteint http://fr.archive.ubuntu.com hardy/restricted Translation-fr   
Atteint http://security.ubuntu.com hardy-security/universe Packages           
Atteint http://security.ubuntu.com hardy-security/universe Sources             
Atteint http://security.ubuntu.com hardy-security/multiverse Packages         
Atteint http://security.ubuntu.com hardy-security/multiverse Sources           
Atteint http://fr.archive.ubuntu.com hardy/universe Translation-fr             
Atteint http://fr.archive.ubuntu.com hardy/multiverse Translation-fr
Atteint http://fr.archive.ubuntu.com hardy-updates Release.gpg
Ign http://fr.archive.ubuntu.com hardy-updates/main Translation-fr
Ign http://fr.archive.ubuntu.com hardy-updates/restricted Translation-fr
Ign http://fr.archive.ubuntu.com hardy-updates/universe Translation-fr
Ign http://fr.archive.ubuntu.com hardy-updates/multiverse Translation-fr
Atteint http://fr.archive.ubuntu.com hardy Release
Atteint http://fr.archive.ubuntu.com hardy-updates Release                 
Atteint http://fr.archive.ubuntu.com hardy/main Packages                   
Atteint http://fr.archive.ubuntu.com hardy/restricted Packages
Atteint http://fr.archive.ubuntu.com hardy/main Sources
Atteint http://fr.archive.ubuntu.com hardy/restricted Sources
Atteint http://fr.archive.ubuntu.com hardy/universe Packages
Atteint http://fr.archive.ubuntu.com hardy/universe Sources
Atteint http://fr.archive.ubuntu.com hardy/multiverse Packages
Atteint http://fr.archive.ubuntu.com hardy/multiverse Sources
Atteint http://fr.archive.ubuntu.com hardy-updates/main Packages
Atteint http://fr.archive.ubuntu.com hardy-updates/restricted Packages
Atteint http://fr.archive.ubuntu.com hardy-updates/main Sources
Atteint http://fr.archive.ubuntu.com hardy-updates/restricted Sources
Atteint http://fr.archive.ubuntu.com hardy-updates/universe Packages
Atteint http://fr.archive.ubuntu.com hardy-updates/universe Sources
Atteint http://fr.archive.ubuntu.com hardy-updates/multiverse Packages
Atteint http://fr.archive.ubuntu.com hardy-updates/multiverse Sources
Lecture des listes de paquets... Fait
apres je tape :sudo apt-get install easycam2-gtk
voila ce que ca donne:
tahar@tahar-hp:~$ sudo apt-get install easycam2-gtk
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet easycam2-gtk
tahar@tahar-hp:~$
merci d'avance de votre aide.

Hors ligne

#2336 Le 28/08/2008, à 23:20

freechelmi

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Clique plutot la :

[apt]apt+http://blognux.free.fr/ubuntu?package=easycam2-gtk?dist=hardy?section=main[/apt]

Edit : bon vu que le forum n'en veux pas ( surement pour de bonnes raisons , copie

apt+http://blognux.free.fr/ubuntu?package=easycam2-gtk?dist=hardy?section=main

Dans la barre d'adresse de Firefox et le tour est joué

Dernière modification par freechelmi (Le 28/08/2008, à 23:47)

Hors ligne

#2337 Le 29/08/2008, à 02:48

MucH04

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Bonjour,

J'ai une Philips ToUcam XS
J'ai essayer de l'installer avec EasyCam2, en testant dans Cheese par exemple, juste la mire, et dans aMsn, aucune webcam detectée evidemment.
J'ai lu qu'il fallait utiliser le driver pwc, et apres quelque recherche, apparement sur hardy il faut utiliser la version incluse dans le noyau.

Le probleme c'est que maintenant la webcam est associé au driver OV518

Bus 005 Device 006: ID 05a9:0518 OmniVision Technologies, Inc. OV518 WebCam

Comment faire pour l'utiliser avec pwc ?

Je galere

Merci d'avance.

MucH

#2338 Le 29/08/2008, à 20:23

abourayan

Re : [Clos] Centralisation Probleme Webcam+EasyCam

ca ne marche pas j'ai une fenetre qui s'ouvre ou c'est ecrit: Une erreur est survenue lors du chargement ou de l'enregistrement des informations de configuration de firefox. Certains de vos paramètres de configuration ne fonctionneront peut-être pas correctement.
et voila les details :Nom de clé ou de répertoire non conforme: « /desktop/gnome/url-handlers/apt+http/enabled » : « + » est un caractère non valide dans un nom de clé/répertoire.

Hors ligne

#2339 Le 29/08/2008, à 21:07

freechelmi

Re : [Clos] Centralisation Probleme Webcam+EasyCam

C'est nouveau ça . Tu es sous Hardy ? les liens apt:/  marche habituellement ?

Hors ligne

#2340 Le 29/08/2008, à 21:34

abourayan

Re : [Clos] Centralisation Probleme Webcam+EasyCam

moi je suis qu'un debutant mais oui je pense que je suis sous hardy

Hors ligne

#2341 Le 29/08/2008, à 22:48

Kedoc

Re : [Clos] Centralisation Probleme Webcam+EasyCam

abourayan a écrit :

moi je suis qu'un debutant mais oui je pense que je suis sous hardy

Pour être fixé : Système > Administration > Moniteur Système

Dernière modification par Kedoc (Le 29/08/2008, à 22:49)


Kedoc

Hors ligne

#2342 Le 29/08/2008, à 23:50

abourayan

Re : [Clos] Centralisation Probleme Webcam+EasyCam

ubuntu version 8.04( hardy)

Hors ligne

#2343 Le 31/08/2008, à 10:07

eric-sylvie

Re : [Clos] Centralisation Probleme Webcam+EasyCam

bonjour,
j'ai essayé d'installer ma webcam Microsoft VX1000 sous Ubuntu (hardy) en passant par Easycam2.
Lorsque je fais "exécuter / webcam" l'image est toute foncée et je distingue à peine.

merci pour vos conseils

#2344 Le 31/08/2008, à 11:13

Anbreizh

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Test les commandes suivantes (Sans débrancher ta webcam ! ) :

sudo modprobe -r gspca
sudo modprobe gspca gamma=5

Si tu note une modification, mais que ce n'est pas suffisant, recommence les commandes en jouant sur la valeur de gamma


"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu"     Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr

Hors ligne

#2345 Le 31/08/2008, à 11:15

Anbreizh

Re : [Clos] Centralisation Probleme Webcam+EasyCam

MucH04 : Normalement, elle fonctionne avec EasyCam. Mais tu doit avoir un conflit de driver. Je vais mettre à jour EasyCam pour supprimer ça. Je te redis quand c'est fait


"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu"     Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr

Hors ligne

#2346 Le 31/08/2008, à 11:57

Anbreizh

Re : [Clos] Centralisation Probleme Webcam+EasyCam

La mise à jour est disponible


"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu"     Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr

Hors ligne

#2347 Le 01/09/2008, à 01:54

MucH04

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Hey salut!

J'ai installer la mise a jour, relancer, toujours le meme driver proposé, je l'installe et ... pareil sad
Je dois faire quelque chose en plus ?
Desolé et merci quand meme et d'avance big_smile

#2348 Le 01/09/2008, à 07:43

MucH04

Re : [Clos] Centralisation Probleme Webcam+EasyCam

GO !
ln: création d'un lien symbolique `/lib/modules/2.6.24-19-rt/build/include/linux/config.h': Le fichier existe
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
linux-headers-2.6.24-19-rt est déjà la plus récente version disponible.
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  libnss3-0d
Veuillez utiliser « apt-get autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 2 non mis à jour.
rm -rf .*.cmd  *.mod.c *.ko *.o .tmp_versions Module.symvers *~ core *.i *.cmd .ov51x-jpeg-core.o.d
rm: ne peut enlever `/lib/modules/2.6.24-19-rt/kernel/drivers/media/video/ov511.ko': Aucun fichier ou dossier de ce type
make -C /lib/modules/2.6.24-19-rt/build M=/usr/share/EasyCam2/drivers/ov51x modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.24-19-rt »
  CC [M]  /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg-core.o
  CC [M]  /usr/share/EasyCam2/drivers/ov51x/ov511-decomp.o
  CC [M]  /usr/share/EasyCam2/drivers/ov51x/ov518-decomp.o
  CC [M]  /usr/share/EasyCam2/drivers/ov51x/ov519-decomp.o
  LD [M]  /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg.mod.o
  LD [M]  /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg.ko
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.24-19-rt »
make -C /lib/modules/2.6.24-19-rt/build M=/usr/share/EasyCam2/drivers/ov51x modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.24-19-rt »
  Building modules, stage 2.
  MODPOST 1 modules
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.24-19-rt »
make -C /lib/modules/2.6.24-19-rt/build M=/usr/share/EasyCam2/drivers/ov51x modules_install
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.24-19-rt »
  INSTALL /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg.ko
  DEPMOD  2.6.24-19-rt
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.24-19-rt »
depmod -a

Voici les details lorsque je lance l'installation du driver en ayant lancé easycam dans le terminal
Si ca peut être utile ? wink

A plume ! smile

#2349 Le 01/09/2008, à 07:44

MucH04

Re : [Clos] Centralisation Probleme Webcam+EasyCam

GO !
ln: création d'un lien symbolique `/lib/modules/2.6.24-19-rt/build/include/linux/config.h': Le fichier existe
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
linux-headers-2.6.24-19-rt est déjà la plus récente version disponible.
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  libnss3-0d
Veuillez utiliser « apt-get autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 2 non mis à jour.
rm -rf .*.cmd  *.mod.c *.ko *.o .tmp_versions Module.symvers *~ core *.i *.cmd .ov51x-jpeg-core.o.d
rm: ne peut enlever `/lib/modules/2.6.24-19-rt/kernel/drivers/media/video/ov511.ko': Aucun fichier ou dossier de ce type
make -C /lib/modules/2.6.24-19-rt/build M=/usr/share/EasyCam2/drivers/ov51x modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.24-19-rt »
  CC [M]  /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg-core.o
  CC [M]  /usr/share/EasyCam2/drivers/ov51x/ov511-decomp.o
  CC [M]  /usr/share/EasyCam2/drivers/ov51x/ov518-decomp.o
  CC [M]  /usr/share/EasyCam2/drivers/ov51x/ov519-decomp.o
  LD [M]  /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg.mod.o
  LD [M]  /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg.ko
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.24-19-rt »
make -C /lib/modules/2.6.24-19-rt/build M=/usr/share/EasyCam2/drivers/ov51x modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.24-19-rt »
  Building modules, stage 2.
  MODPOST 1 modules
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.24-19-rt »
make -C /lib/modules/2.6.24-19-rt/build M=/usr/share/EasyCam2/drivers/ov51x modules_install
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.24-19-rt »
  INSTALL /usr/share/EasyCam2/drivers/ov51x/ov51x-jpeg.ko
  DEPMOD  2.6.24-19-rt
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.24-19-rt »
depmod -a

Voici les details lorsque je lance l'installation du driver en ayant lancé easycam dans le terminal
Si ca peut être utile ? wink

A plume et encore merci! smile

#2350 Le 01/09/2008, à 08:52

Anbreizh

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Donne moi le résultat de la commande 'dmesg' quand tu connecte ta webcam


"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu"     Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr

Hors ligne