Customisation/Création de Live CD/USB

Di@bl@l · Le 29/05/2008, à 22:27

Une question pour smo et frafa a priori.

Vu que l'équipe ubuntu-eee n'as pas réussi à fixer le problème du wifi avec le kernel, je me sui srésigné à mettre Mandriva sur mon eeepc.

j'ai donc suivi une méthode similaire à celle de slym, mais j'ai eu un problème avec syslinux. Quand j'ai fait :

sudo syslinux -f /dev/sdb

Il m'a répondu : invalid fat format ou qqch comme ça !
J'ai du allé sur windows pour rendre ma clé bootable.

Une idée les gars ?

Slym · Le 29/05/2008, à 22:58

Bon c'est officiel, mon tuto marche nikel

Je viens de le tester et de le modifier, même ma grand mère pourrais le faire !

Sinon pour ton soucis Di@bl@l c'est bizarre, perso j'ai aucune idée d'où ça pourrait venir mais bon ce qui compte c'est que t'y sois arrivé :-)

frafa · Le 30/05/2008, à 01:07

==> Slym
Salut,
stp ouvre un post ce n'est vraiment le lieu pour
parler de ton tuto ici...

j'ai ouvert ce post pour trouver des testeurs pour mon script
dans le but de le deboger et de la faire evoluer.
je trouve ton arrivée dans ce post déplacée...

par avance merci! .

Dernière modification par frafa (Le 30/05/2008, à 01:13)

frafa · Le 30/05/2008, à 09:20

==> Di@bl@l
lo,

c'est quoi ce bleme de wifi? , moi marche tres bien mon eee-pc sous hardy

sudo syslinux -f /dev/sdb ==> sudo syslinux -f /dev/sdb1
tas oublié le numero de ta partition sdb1 si ta partition casper-rw est la premiere de la clé

Dernière modification par frafa (Le 30/05/2008, à 09:20)

Slym · Le 30/05/2008, à 09:29

Vous faites votre syslinux dans le casper-rw vous ?

Sur ce, je vais aller squatter un autre post ... désolé pour le dérangement

gnovel · Le 30/05/2008, à 11:30

===> frafra
Bonjour,
Après un mois de galère j'ai réussi à avoir une clé USB avec Kubuntu . Mais elle n'a fonctionné qu'une fois en mode persistant et depuis je n'ai que le mode live (j'écris actuellement depuis cette clé). Est-ce qu'on peut retrouver le mode persistant ?
J'ai une clé usb 4Go : est ce qu'il est possible d'installer le live DVD kubuntu et comment faire les modifs de la partition ?
Merci !

Di@bl@l · Le 30/05/2008, à 17:53

frafa a écrit :

==> Di@bl@l
lo,
c'est quoi ce bleme de wifi? , moi marche tres bien mon eee-pc sous hardy
sudo syslinux -f /dev/sdb ==> sudo syslinux -f /dev/sdb1
tas oublié le numero de ta partition sdb1 si ta partition casper-rw est la premiere de la clé

en fait tu n'as aucun problème mais le wifi actuellement compilé doit l'être avec chaque nouveau kernel !

Les membres de ubuntu-eee en parviennent pas pour l'instant à faire un paquet qui supporte la mise à jour de kernel !

Donc vu que j'ai pas envi que l'on m'appelle toutes les 3 semaines pour dire ça marche pas, je switche le eeepc sur mandriva.

Merci pour la commande, mais quand j'ai fait syslinux avec sdb1 il ne bootait pas dessus...

smo · Le 31/05/2008, à 01:14

ola

frafa, rescue rescue

dis moi est ce que sur tes derniers essais tu as mis a jour un kernel en 2.6.24-17 ???

j essaye depuis hier plus rien marche, j ai beau refaire mon initrd.gz le verifier les dmepod virer tout ce qui parle de 2.6.24-16 et bien au boot il me dit qu il en trouve pas /lib/modules/2.6.24-16-generic !!!!!!!!!???? il le sors d ou ce -16

et du coup un bel (initramfs)... et boot pas evidement...

voila si t as une info ...

(ps si je prend le initrd de mon pc local idem ... reinstall de tout ce qui est kernel idem!!)

++

frafa · Le 31/05/2008, à 06:30

==> Di@bl@l
lo,

ben tu te fait un p'tit script d'init
qui verifie si
/lib/modules/$(uname -r)/net/ath_hal.ko
est bien present, si pas present tu recompile madwifi
via le script d'init...

Dernière modification par frafa (Le 31/05/2008, à 06:32)

soupaloignon · Le 31/05/2008, à 13:57

Salut frafra

Et bien, que de messages dans ce post depuis ces débuts, bravo

Juste une petite question, ton script marche sur Hardy (et si oui est ce bien toujours le script qui est sur le 1er message de ce fil qui est d'actualité) ?

A+

Edit : J'ai voulu retester le script (sous gutsy) et à moment j'ai ce message d'erreur : Erreur de format sur répertoire de travail /mnt: ext3 !=
Veuillez utiliser un des Menu: Délocaliser /mnt

et ça en console : Erreur de format sur répertoire de travail /mnt: ext3 !=

(dans le cas d'une custom de cd)

Dernière modification par soupaloignon (Le 31/05/2008, à 14:19)

gnovel · Le 31/05/2008, à 15:37

===> Frafra
Salut,
Je poste à nouveau pour ré expliquer le problème : j'ai chercher un mois durant sur le net le moyen de faire une usb permanent kubuntu : rien qui ne marchait! mais avec ton script tout est aller en deux coups de cuillère à pot et çà marche impec!
Sauf que un moment j'ai eu un message qui me disait qu'il n'y avait pas assez de place sur la clé (4Go) et l'install a continué!... et le 2ème problème est que en mode persistent je n'ai pas de mode graphique et tout l'écran est un terminal avec un prompt qui me donne la possibilité de lancer des ligne de commande: la seule que j'ai pu faire sans trop de "danger" pour la clé c'est sudo su reboot. Après le reboot je rentre en mode live et çà marche bien.
Je recommence l'install du script depuis le début ou il y a une solution?
Merci pour l'aide
A+

benoit2600 · Le 31/05/2008, à 17:14

@frafa: j'ai réessayer ton, script, et cette fois, tous a fonctionner sans aucun problème !!! les drivers graphiques fonctionnent et tout et tout, franchement bravo !!!

j'ai une petites question : si j'installe des logiciel manuellement (RTU) a partir du mode persistent, est-ce qu'il y a un moyen pou les retrouver dans le live ?

delan · Le 31/05/2008, à 17:32

Je suis en train de tester et pour l'instant je bloque sur ton tuto Slym:"error 17" systématique au lancement de Grub.
Frafra je test aussi ta méthode et je fais un retour

frafa · Le 31/05/2008, à 18:14

Bonjour,

==> soupaloignon

ton erreur est normale lit bien le message et tu comprendras
il faut delocaliser /mnt dans le cas d'un boot en livecd

oui la premiere page du post contiens bien les bonnes adresses de DL.
le script fonctionne sans problemes sous hardy.

==> gnovel
tu est le premier a avoir ce probleme avec mon script...
mais j'ai deja lu sur le web des problemes simmilaires
le mode persistent semble poser probleme a ceratains PC
pour pouvoir deboger il faut que tu regarde les fichiers de log
pour cela demarre depuis un linux en dur ou un livecd
monte le mode persistent ta clé (partition casper-rw) et explore les log d'erreur dans /var/log/...

concernant ton erreur de manque de place, en mode creation, si tu as suffisament de ram
le script ne bloque pas , par contre pour mode custom il faudra que tu delocalise /mnt

==> benoit2600

regarde ce post:
http://forum.ubuntu-fr.org/viewtopic.ph … 0#p1803890
on a developpé avec smo un Add-on qui permet de monter home de persistent en mode live
par contre les soft de persistent pas dispo en live

==> delan
merci, tout retour est le bienvenu

==> All-user
je vous prepare pour lundi un mode reprise du mode custom
un peu comme cemui de smo, le mien ne sauvegardera que le contenu du chroot...

Dernière modification par frafa (Le 31/05/2008, à 22:16)

smo · Le 31/05/2008, à 21:30

ola

frafa je suis encore en train d essayer ton script

je dois etre maudit je sais pas...

umount /dev/sda6
Erreur: impossible de démonter /dev/sda6
sdb
Erreur: extlinux?
fin de Pause café1, Monter/copier squashfs, Veuillez patienter 3/10 Minutes...
Temps d'execution: 0 Minutes et 11 Secondes

pouruqoi y veux me demonter sda6 , normal?

et la ca a bloque apres ca ...

je relance

a toute pt etre

edit : bah pareil y refuse de copier le squashfs erreur extlinux... et sortie... je capte pas

re edit :bon je demonte sda6 voir

pareil

Format ok
Test des partitions de la clé ok /dev/sdc
clé: /dev/sdc
sdc
Erreur: extlinux?
fin de Pause café1, Monter/copier squashfs, Veuillez patienter 3/10 Minutes...
Temps d'execution: 0 Minutes et 11 Secondes

je vais voir dans le code ce qui est checké

++

Dernière modification par smo (Le 31/05/2008, à 21:40)

frafa · Le 31/05/2008, à 21:38

==> smo
lo,
le script demonte tout ce qui n'est pas dans fstab
pour eviter des erreurs a la creation du liveusb et faciliter detection
pas utile je le reconnait dans mode custom....

pour ton erreur : Erreur: extlinux?
bizzarre il ne trouve pas /mnt/liveusb/extlinux.sys
tu n'aurait pas mis ta clé usb dans /etc/fstab des fois ?

if [[ ! -e "/mnt/liveusb/extlinux.conf" || ! -e "/mnt/liveusb/extlinux.sys" ]]; then
echo -e "\033[1;47;31m Erreur: extlinux? \033[0m" ;
rm "/tmp/Log_liveusb.txt"
sleep 2
exit 0
fi

t'as dl derniere version du script?
car j'ai refait fonction UMOUNT_SD plus propre avant-hier

Dernière modification par frafa (Le 31/05/2008, à 21:42)

smo · Le 31/05/2008, à 21:44

ola

passes sur msn ... m ennuie de te dire tout ca dans le topic..

bah c est version d hier soir..;

ah je pense avoir trouvé

moi dans mon script je range tout ce qui est extlinux dans un dossier boot ala racine de la cle du coup le teins trouve pas le extlinux.conf

j essaye en copiant tout a la racine

++

Dernière modification par smo (Le 31/05/2008, à 21:46)

frafa · Le 01/06/2008, à 00:00

==> All-user
lo

smo a debogé la partie driver proprio ati
car je n'ai rien en ati , et ne pouvait donc pas le faire
je vous integre ses modif pour demain soir.
smo encore merci a toi, tu m'enleve une épine du pied

Oliv7 · Le 01/06/2008, à 09:58

Salut,

Cooperation-iws 0.3.1 est sortie !

Au menu correction de bugs et portage sur Debian Lenny du projet http://debian-live.alioth.debian.org/ tout en gardant la compatibilité avec Hardy.

Les modifications apportées au script pour le portage sur Debian ont été les suivantes:

- Prise en compte du passage à live-initramfs (et plus casper-initramfs).

- Obligation de créer sa propre iso Debian Lenny avec le paquet Live-helper car les iso téléchargeables du projet Debian Live contiennent deux vmlinuz et deux initrd.gz (un pour 486 et un pour 686) et comme il y a un bug dans le syslinux du live CD, on ne peut booter qu'en mode 486.

Edit (jai oublié):

Le changes log de la 0.3.1 est le suivant:

-------------------
0.3.1 release

-added Berlios 1 and Berlios 2 mirror functionnality
-fixed some bugs in Boot CD functions
-fixed Proftpd login change bug
-portage to Debian Lenny while keeping Ubuntu Hardy compatibility
-added Registered key support for Snort rules (to use with oinkmaster)
-created cooperation-wui tar.gz package
-added math support + wikipedia extension to mediawiki module
-move from Xnest to Xephyr
-added custom plugin wp-print for wordpress
-evoluate wpmathpublisher for wordpress
-evoluate local mirror functionnality
-merge demo and demo master functionnality for Live CD (only one kind of Live CD/DVD)

==> Frafa

Je serais toi je commencerai à m'intéresser au package live-helper de Debian et à leur mailing list.

Pour l'instant le paquet ne marche pas sur Ubuntu (ou mal j'ai pas testé), mais transformer ton script pour en faire une surcouche à live-helper ça pourrait être sympa.

Bon allez, bon courage,

@+Oliv

Dernière modification par Oliv7 (Le 01/06/2008, à 10:17)

trajan · Le 01/06/2008, à 13:01

Alors bravo pour le boulot tout d'abord, j'ai un petit peu testé avec ubuntu et xubuntu, en live-cd perso ou réalisation de clé usb bootable...si tu as besoin de faire des tests particuliers, dans la mesure de mes capacités et du temps que j'ai je suis ok.
Petite question, est-il possible d'integrer des bootsplash theme en .so ?

gnovel · Le 01/06/2008, à 14:26

===> frafra
bonjour, je poste le résultat du kernel.log juste avant de recommencer l'installation du script - j'aurai peut-etre plus de chance- mais cette fois je ferais l'install à partir du poste où linux est installé sur le DD et non pas à partir du liveCD
A+ et merci pour le script.
Voilà le log (je vois qu'il y a des choses qui tourne pas mais je n'ai que 3 mois de linux dans les doigts) :
Jun 1 12:50:58 ubuntu kernel: Inspecting /boot/System.map-2.6.24-16-generic
Jun 1 12:50:58 ubuntu kernel: Loaded 27704 symbols from /boot/System.map-2.6.24-16-generic.
Jun 1 12:50:58 ubuntu kernel: Symbols match kernel version 2.6.24.
Jun 1 12:50:58 ubuntu kernel: Loaded 20389 symbols from 99 modules.
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-provided physical RAM map:
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe70000 (usable)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-e820: 000000007fe70000 - 000000007ff00000 (ACPI NVS)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] 1150MB HIGHMEM available.
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] 896MB LOWMEM available.
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] found SMP MP-table at 000f6a10
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Entering add_active_range(0, 0, 523888) 0 entries of 256 used
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Zone PFN ranges:
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] DMA 0 -> 4096
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Normal 4096 -> 229376
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] HighMem 229376 -> 523888
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Movable zone start PFN for each node
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] early_node_map[1] active PFN ranges
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] 0: 0 -> 523888
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] On node 0 totalpages: 523888
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] DMA zone: 0 pages reserved
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Normal zone: 1760 pages used for memmap
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] HighMem zone: 2300 pages used for memmap
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] HighMem zone: 292212 pages, LIFO batch:31
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] DMI present.
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F6960 checksum 0
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: RSDP 000F6960, 0024 (r2 TOSINV)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: XSDT 7FE78718, 008C (r1 TOSINV TOSINV00 6040000 INV 0)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: FACP 7FE81BF8, 00F4 (r3 TOSINV TOSINV00 6040000 ALAN 1)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: DSDT 7FE7A4B1, 76D3 (r2 TOSINV CALISTGA 6040000 INTL 20050624)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: FACS 7FE82FC0, 0040
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: APIC 7FE81CEC, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: HPET 7FE81D54, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: MCFG 7FE81D8C, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: TCPA 7FE81DC8, 0032 (r1 PTLTD CALISTGA 6040000 PTL 1)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: APIC 7FE81DFA, 0068 (r1 TOSINV APIC 6040000 INV 0)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: SLIC 7FE81E62, 0176 (r1 TOSINV TOSINV00 6040000 INV 0)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: BOOT 7FE81FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: SSDT 7FE79E62, 064F (r1 SataRe SataPri 1000 INTL 20050624)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: SSDT 7FE797D0, 0692 (r1 SataRe SataSec 1000 INTL 20050624)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: SSDT 7FE78D30, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: SSDT 7FE78C8A, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: SSDT 7FE787A4, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: DMI detected: Toshiba
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Processor #0 6:15 APIC version 20
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Processor #1 6:15 APIC version 20
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: IRQ0 used by override.
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: IRQ2 used by override.
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519796
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Kernel command line: locale=fr_FR.UTF-8 kbd-chooser/method=fr console-setup/layoutcode=fr console-setup/variantcode=nodeadkeys console-setup/modelcode=pc105 boot=casper persistent initrd=/initrd.gz file=/preseed/kubuntu.seed verbose splash -- BOOT_IMAGE=/vmlinuz
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Initializing CPU#0
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Jun 1 12:50:58 ubuntu kernel: [ 0.000000] Detected 1995.029 MHz processor.
Jun 1 12:50:58 ubuntu kernel: [ 33.268241] Console: colour VGA+ 80x25
Jun 1 12:50:58 ubuntu kernel: [ 33.268244] console [tty0] enabled
Jun 1 12:50:58 ubuntu kernel: [ 33.274401] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jun 1 12:50:58 ubuntu kernel: [ 33.274742] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun 1 12:50:58 ubuntu kernel: [ 33.355499] Memory: 2065096k/2095552k available (2157k kernel code, 29252k reserved, 998k data, 364k init, 1178048k highmem)
Jun 1 12:50:58 ubuntu kernel: [ 33.355601] virtual kernel memory layout:
Jun 1 12:50:58 ubuntu kernel: [ 33.355602] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
Jun 1 12:50:58 ubuntu kernel: [ 33.355603] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Jun 1 12:50:58 ubuntu kernel: [ 33.355604] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Jun 1 12:50:58 ubuntu kernel: [ 33.355605] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Jun 1 12:50:58 ubuntu kernel: [ 33.355606] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
Jun 1 12:50:58 ubuntu kernel: [ 33.355607] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
Jun 1 12:50:58 ubuntu kernel: [ 33.355608] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
Jun 1 12:50:58 ubuntu kernel: [ 33.356254] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jun 1 12:50:58 ubuntu kernel: [ 33.356450] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Jun 1 12:50:58 ubuntu kernel: [ 33.356672] hpet clockevent registered
Jun 1 12:50:58 ubuntu kernel: [ 33.436635] Calibrating delay using timer specific routine.. 3994.67 BogoMIPS (lpj=7989358)
Jun 1 12:50:58 ubuntu kernel: [ 33.436814] Security Framework initialized
Jun 1 12:50:58 ubuntu kernel: [ 33.436900] SELinux: Disabled at boot.
Jun 1 12:50:58 ubuntu kernel: [ 33.436990] AppArmor: AppArmor initialized
Jun 1 12:50:58 ubuntu kernel: [ 33.437070] Failure registering capabilities with primary security module.
Jun 1 12:50:58 ubuntu kernel: [ 33.437156] Mount-cache hash table entries: 512
Jun 1 12:50:58 ubuntu kernel: [ 33.437354] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000000
Jun 1 12:50:58 ubuntu kernel: [ 33.437363] monitor/mwait feature present.
Jun 1 12:50:58 ubuntu kernel: [ 33.437445] using mwait in idle threads.
Jun 1 12:50:58 ubuntu kernel: [ 33.437523] CPU: L1 I cache: 32K, L1 D cache: 32K
Jun 1 12:50:58 ubuntu kernel: [ 33.437671] CPU: L2 cache: 4096K
Jun 1 12:50:58 ubuntu kernel: [ 33.437751] CPU: Physical Processor ID: 0
Jun 1 12:50:58 ubuntu kernel: [ 33.437829] CPU: Processor Core ID: 0
Jun 1 12:50:58 ubuntu kernel: [ 33.437911] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Jun 1 12:50:58 ubuntu kernel: [ 33.437920] Compat vDSO mapped to ffffe000.
Jun 1 12:50:58 ubuntu kernel: [ 33.438011] Checking 'hlt' instruction... OK.
Jun 1 12:50:58 ubuntu kernel: [ 33.453050] SMP alternatives: switching to UP code
Jun 1 12:50:58 ubuntu kernel: [ 33.454582] Early unpacking initramfs... done
Jun 1 12:50:58 ubuntu kernel: [ 33.762894] ACPI: Core revision 20070126
Jun 1 12:50:58 ubuntu kernel: [ 33.763014] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Jun 1 12:50:58 ubuntu kernel: [ 33.804042] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
Jun 1 12:50:58 ubuntu kernel: [ 33.804260] SMP alternatives: switching to SMP code
Jun 1 12:50:58 ubuntu kernel: [ 33.804967] Booting processor 1/1 eip 3000
Jun 1 12:50:58 ubuntu kernel: [ 33.815479] Initializing CPU#1
Jun 1 12:50:58 ubuntu kernel: [ 33.892375] Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=7980075)
Jun 1 12:50:58 ubuntu kernel: [ 33.892381] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000000
Jun 1 12:50:58 ubuntu kernel: [ 33.892385] monitor/mwait feature present.
Jun 1 12:50:58 ubuntu kernel: [ 33.892388] CPU: L1 I cache: 32K, L1 D cache: 32K
Jun 1 12:50:58 ubuntu kernel: [ 33.892390] CPU: L2 cache: 4096K
Jun 1 12:50:58 ubuntu kernel: [ 33.892392] CPU: Physical Processor ID: 0
Jun 1 12:50:58 ubuntu kernel: [ 33.892393] CPU: Processor Core ID: 1
Jun 1 12:50:58 ubuntu kernel: [ 33.892394] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Jun 1 12:50:58 ubuntu kernel: [ 33.893074] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
Jun 1 12:50:58 ubuntu kernel: [ 33.893824] Total of 2 processors activated (7984.71 BogoMIPS).
Jun 1 12:50:58 ubuntu kernel: [ 33.894102] ENABLING IO-APIC IRQs
Jun 1 12:50:58 ubuntu kernel: [ 33.894365] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jun 1 12:50:58 ubuntu kernel: [ 34.040394] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jun 1 12:50:58 ubuntu kernel: [ 34.060545] Brought up 2 CPUs
Jun 1 12:50:58 ubuntu kernel: [ 34.060641] CPU0 attaching sched-domain:
Jun 1 12:50:58 ubuntu kernel: [ 34.060643] domain 0: span 03
Jun 1 12:50:58 ubuntu kernel: [ 34.060644] groups: 01 02
Jun 1 12:50:58 ubuntu kernel: [ 34.060647] CPU1 attaching sched-domain:
Jun 1 12:50:58 ubuntu kernel: [ 34.060648] domain 0: span 03
Jun 1 12:50:58 ubuntu kernel: [ 34.060650] groups: 02 01
Jun 1 12:50:58 ubuntu kernel: [ 34.060864] net_namespace: 64 bytes
Jun 1 12:50:58 ubuntu kernel: [ 34.060952] Booting paravirtualized kernel on bare hardware
Jun 1 12:50:58 ubuntu kernel: [ 34.061457] Time: 12:49:44 Date: 06/01/08
Jun 1 12:50:58 ubuntu kernel: [ 34.061563] NET: Registered protocol family 16
Jun 1 12:50:58 ubuntu kernel: [ 34.061830] EISA bus registered
Jun 1 12:50:58 ubuntu kernel: [ 34.061908] ACPI: bus type pci registered
Jun 1 12:50:58 ubuntu kernel: [ 34.062160] PCI: PCI BIOS revision 2.10 entry at 0xfd604, last bus=7
Jun 1 12:50:58 ubuntu kernel: [ 34.062242] PCI: Using configuration type 1
Jun 1 12:50:58 ubuntu kernel: [ 34.062315] Setting up standard PCI resources
Jun 1 12:50:58 ubuntu kernel: [ 34.065252] ACPI: EC: Look up EC in DSDT
Jun 1 12:50:58 ubuntu kernel: [ 34.090451] ACPI: BIOS _OSI(Linux) query ignored via DMI
Jun 1 12:50:58 ubuntu kernel: [ 34.091104] ACPI: Interpreter enabled
Jun 1 12:50:58 ubuntu kernel: [ 34.091183] ACPI: (supports S0 S3 S4 S5)
Jun 1 12:50:58 ubuntu kernel: [ 34.091518] ACPI: Using IOAPIC for interrupt routing
Jun 1 12:50:58 ubuntu kernel: [ 34.091882] ACPI: EC: non-query interrupt received, switching to interrupt mode
Jun 1 12:50:58 ubuntu kernel: [ 34.176667] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
Jun 1 12:50:58 ubuntu kernel: [ 34.176749] ACPI: EC: driver started in interrupt mode
Jun 1 12:50:58 ubuntu kernel: [ 34.176868] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun 1 12:50:58 ubuntu kernel: [ 34.177722] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Jun 1 12:50:58 ubuntu kernel: [ 34.177808] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
Jun 1 12:50:58 ubuntu kernel: [ 34.179279] PCI: Transparent bridge - 0000:00:1e.0
Jun 1 12:50:58 ubuntu kernel: [ 34.179447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jun 1 12:50:58 ubuntu kernel: [ 34.179707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
Jun 1 12:50:58 ubuntu kernel: [ 34.179827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Jun 1 12:50:58 ubuntu kernel: [ 34.179941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Jun 1 12:50:58 ubuntu kernel: [ 34.180055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Jun 1 12:50:58 ubuntu kernel: [ 34.180179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Jun 1 12:50:58 ubuntu kernel: [ 34.300446] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Jun 1 12:50:58 ubuntu kernel: [ 34.301374] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Jun 1 12:50:58 ubuntu kernel: [ 34.302290] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Jun 1 12:50:58 ubuntu kernel: [ 34.303269] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Jun 1 12:50:58 ubuntu kernel: [ 34.304259] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Jun 1 12:50:58 ubuntu kernel: [ 34.305175] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Jun 1 12:50:58 ubuntu kernel: [ 34.306233] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Jun 1 12:50:58 ubuntu kernel: [ 34.307154] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Jun 1 12:50:58 ubuntu kernel: [ 34.308124] ACPI: Power Resource [FN00] (off)
Jun 1 12:50:58 ubuntu kernel: [ 34.308255] Linux Plug and Play Support v0.97 (c) Adam Belay
Jun 1 12:50:58 ubuntu kernel: [ 34.308360] pnp: PnP ACPI init
Jun 1 12:50:58 ubuntu kernel: [ 34.308442] ACPI: bus type pnp registered
Jun 1 12:50:58 ubuntu kernel: [ 34.380283] pnp: PnP ACPI: found 10 devices
Jun 1 12:50:58 ubuntu kernel: [ 34.380366] ACPI: ACPI bus type pnp unregistered
Jun 1 12:50:58 ubuntu kernel: [ 34.380443] PnPBIOS: Disabled by ACPI PNP
Jun 1 12:50:58 ubuntu kernel: [ 34.380728] PCI: Using ACPI for IRQ routing
Jun 1 12:50:58 ubuntu kernel: [ 34.380807] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jun 1 12:50:58 ubuntu kernel: [ 34.440330] NET: Registered protocol family 8
Jun 1 12:50:58 ubuntu kernel: [ 34.440408] NET: Registered protocol family 20
Jun 1 12:50:58 ubuntu kernel: [ 34.440512] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Jun 1 12:50:58 ubuntu kernel: [ 34.440840] hpet0: 3 64-bit timers, 14318180 Hz
Jun 1 12:50:58 ubuntu kernel: [ 34.441944] AppArmor: AppArmor Filesystem Enabled
Jun 1 12:50:58 ubuntu kernel: [ 34.444072] Time: tsc clocksource has been installed.
Jun 1 12:50:58 ubuntu kernel: [ 34.444164] Switched to high resolution mode on CPU 0
Jun 1 12:50:58 ubuntu kernel: [ 34.444325] Switched to high resolution mode on CPU 1
Jun 1 12:50:58 ubuntu kernel: [ 34.457047] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.459773] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.459861] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.459948] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.460040] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.460127] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.460215] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.460302] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.460390] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.460480] system 00:06: ioport range 0x3e8-0x3ef has been reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.460559] system 00:06: ioport range 0x400-0x401 has been reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.460637] system 00:06: ioport range 0x680-0x69f has been reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.460717] system 00:06: ioport range 0x800-0x80f has been reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.460796] system 00:06: ioport range 0x1000-0x107f has been reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.460877] system 00:06: ioport range 0x1180-0x11bf has been reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.460955] system 00:06: ioport range 0x1640-0x164f has been reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.461034] system 00:06: ioport range 0xfe00-0xfe01 has been reserved
Jun 1 12:50:58 ubuntu kernel: [ 34.491504] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
Jun 1 12:50:58 ubuntu kernel: [ 34.491594] PCI: Bridge: 0000:00:01.0
Jun 1 12:50:58 ubuntu kernel: [ 34.491670] IO window: 2000-2fff
Jun 1 12:50:58 ubuntu kernel: [ 34.491748] MEM window: cd000000-ceffffff
Jun 1 12:50:58 ubuntu kernel: [ 34.491825] PREFETCH window: d0000000-dfffffff
Jun 1 12:50:58 ubuntu kernel: [ 34.491903] PCI: Bridge: 0000:00:1c.0
Jun 1 12:50:58 ubuntu kernel: [ 34.491977] IO window: disabled.
Jun 1 12:50:58 ubuntu kernel: [ 34.492058] MEM window: disabled.
Jun 1 12:50:58 ubuntu kernel: [ 34.492137] PREFETCH window: disabled.
Jun 1 12:50:58 ubuntu kernel: [ 34.492216] PCI: Bridge: 0000:00:1c.1
Jun 1 12:50:58 ubuntu kernel: [ 34.492293] IO window: 3000-3fff
Jun 1 12:50:58 ubuntu kernel: [ 34.492372] MEM window: f0700000-f07fffff
Jun 1 12:50:58 ubuntu kernel: [ 34.492450] PREFETCH window: f0200000-f03fffff
Jun 1 12:50:58 ubuntu kernel: [ 34.492531] PCI: Bridge: 0000:00:1c.2
Jun 1 12:50:58 ubuntu kernel: [ 34.492607] IO window: 4000-4fff
Jun 1 12:50:58 ubuntu kernel: [ 34.492685] MEM window: f0800000-f08fffff
Jun 1 12:50:58 ubuntu kernel: [ 34.492765] PREFETCH window: f0400000-f05fffff
Jun 1 12:50:58 ubuntu kernel: [ 34.492852] PCI: Bus 8, cardbus bridge: 0000:07:06.0
Jun 1 12:50:58 ubuntu kernel: [ 34.492928] IO window: 00005400-000054ff
Jun 1 12:50:58 ubuntu kernel: [ 34.493008] IO window: 00005800-000058ff
Jun 1 12:50:58 ubuntu kernel: [ 34.493088] PREFETCH window: 88000000-8bffffff
Jun 1 12:50:58 ubuntu kernel: [ 34.493166] MEM window: 8c000000-8fffffff
Jun 1 12:50:58 ubuntu kernel: [ 34.493244] PCI: Bridge: 0000:00:1e.0
Jun 1 12:50:58 ubuntu kernel: [ 34.493318] IO window: 5000-5fff
Jun 1 12:50:58 ubuntu kernel: [ 34.493396] MEM window: f0900000-f09fffff
Jun 1 12:50:58 ubuntu kernel: [ 34.493473] PREFETCH window: disabled.
Jun 1 12:50:58 ubuntu kernel: [ 34.493561] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 1 12:50:58 ubuntu kernel: [ 34.493713] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jun 1 12:50:58 ubuntu kernel: [ 34.493736] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Jun 1 12:50:58 ubuntu kernel: [ 34.493894] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jun 1 12:50:58 ubuntu kernel: [ 34.493917] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 16
Jun 1 12:50:58 ubuntu kernel: [ 34.494070] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jun 1 12:50:58 ubuntu kernel: [ 34.494094] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 1 12:50:58 ubuntu kernel: [ 34.494243] PCI: Setting latency timer of device 0000:00:1c.2 to 64
Jun 1 12:50:58 ubuntu kernel: [ 34.494257] PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jun 1 12:50:58 ubuntu kernel: [ 34.494273] PCI: Enabling device 0000:07:06.0 (0000 -> 0003)
Jun 1 12:50:58 ubuntu kernel: [ 34.494355] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 18
Jun 1 12:50:58 ubuntu kernel: [ 34.494514] NET: Registered protocol family 2
Jun 1 12:50:58 ubuntu kernel: [ 34.532018] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 1 12:50:58 ubuntu kernel: [ 34.532289] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 1 12:50:58 ubuntu kernel: [ 34.532755] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jun 1 12:50:58 ubuntu kernel: [ 34.533015] TCP: Hash tables configured (established 131072 bind 65536)
Jun 1 12:50:58 ubuntu kernel: [ 34.533094] TCP reno registered
Jun 1 12:50:58 ubuntu kernel: [ 34.544070] checking if image is initramfs... it is
Jun 1 12:50:58 ubuntu kernel: [ 35.147287] Freeing initrd memory: 7901k freed
Jun 1 12:50:58 ubuntu kernel: [ 35.147531] Simple Boot Flag at 0x36 set to 0x1
Jun 1 12:50:58 ubuntu kernel: [ 35.148256] audit: initializing netlink socket (disabled)
Jun 1 12:50:58 ubuntu kernel: [ 35.148349] audit(1212324584.632:1): initialized
Jun 1 12:50:58 ubuntu kernel: [ 35.148633] highmem bounce pool size: 64 pages
Jun 1 12:50:58 ubuntu kernel: [ 35.150547] VFS: Disk quotas dquot_6.5.1
Jun 1 12:50:58 ubuntu kernel: [ 35.150694] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 1 12:50:58 ubuntu kernel: [ 35.150895] io scheduler noop registered
Jun 1 12:50:58 ubuntu kernel: [ 35.150973] io scheduler anticipatory registered
Jun 1 12:50:58 ubuntu kernel: [ 35.151050] io scheduler deadline registered
Jun 1 12:50:58 ubuntu kernel: [ 35.151133] io scheduler cfq registered (default)
Jun 1 12:50:58 ubuntu kernel: [ 35.151310] Boot video device is 0000:01:00.0
Jun 1 12:50:58 ubuntu kernel: [ 35.151423] PCI: Setting latency timer of device 0000:00:01.0 to 64
Jun 1 12:50:58 ubuntu kernel: [ 35.151458] assign_interrupt_mode Found MSI capability
Jun 1 12:50:58 ubuntu kernel: [ 35.151569] Allocate Port Service[0000:00:01.0:pcie00]
Jun 1 12:50:58 ubuntu kernel: [ 35.151652] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jun 1 12:50:58 ubuntu kernel: [ 35.151711] assign_interrupt_mode Found MSI capability
Jun 1 12:50:58 ubuntu kernel: [ 35.151835] Allocate Port Service[0000:00:1c.0:pcie00]
Jun 1 12:50:58 ubuntu kernel: [ 35.151867] Allocate Port Service[0000:00:1c.0:pcie02]
Jun 1 12:50:58 ubuntu kernel: [ 35.151966] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jun 1 12:50:58 ubuntu kernel: [ 35.152025] assign_interrupt_mode Found MSI capability
Jun 1 12:50:58 ubuntu kernel: [ 35.152150] Allocate Port Service[0000:00:1c.1:pcie00]
Jun 1 12:50:58 ubuntu kernel: [ 35.152181] Allocate Port Service[0000:00:1c.1:pcie02]
Jun 1 12:50:58 ubuntu kernel: [ 35.152281] PCI: Setting latency timer of device 0000:00:1c.2 to 64
Jun 1 12:50:58 ubuntu kernel: [ 35.152340] assign_interrupt_mode Found MSI capability
Jun 1 12:50:58 ubuntu kernel: [ 35.152467] Allocate Port Service[0000:00:1c.2:pcie00]
Jun 1 12:50:58 ubuntu kernel: [ 35.152504] Allocate Port Service[0000:00:1c.2:pcie02]
Jun 1 12:50:58 ubuntu kernel: [ 35.152756] isapnp: Scanning for PnP cards...
Jun 1 12:50:58 ubuntu kernel: [ 35.507318] isapnp: No Plug & Play device found
Jun 1 12:50:58 ubuntu kernel: [ 35.530443] Real Time Clock Driver v1.12ac
Jun 1 12:50:58 ubuntu kernel: [ 35.530752] hpet_resources: 0xfed00000 is busy
Jun 1 12:50:58 ubuntu kernel: [ 35.530780] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jun 1 12:50:58 ubuntu kernel: [ 35.531966] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Jun 1 12:50:58 ubuntu kernel: [ 35.532115] input: Macintosh mouse button emulation as /devices/virtual/input/input0
Jun 1 12:50:58 ubuntu kernel: [ 35.532297] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jun 1 12:50:58 ubuntu kernel: [ 35.535243] i8042.c: Detected active multiplexing controller, rev 1.1.
Jun 1 12:50:58 ubuntu kernel: [ 35.536805] serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 1 12:50:58 ubuntu kernel: [ 35.536887] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Jun 1 12:50:58 ubuntu kernel: [ 35.536969] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Jun 1 12:50:58 ubuntu kernel: [ 35.537052] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Jun 1 12:50:58 ubuntu kernel: [ 35.537132] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Jun 1 12:50:58 ubuntu kernel: [ 35.555547] mice: PS/2 mouse device common for all mice
Jun 1 12:50:58 ubuntu kernel: [ 35.555727] EISA: Probing bus 0 at eisa.0
Jun 1 12:50:58 ubuntu kernel: [ 35.555812] Cannot allocate resource for EISA slot 1
Jun 1 12:50:58 ubuntu kernel: [ 35.555889] Cannot allocate resource for EISA slot 2
Jun 1 12:50:58 ubuntu kernel: [ 35.555966] Cannot allocate resource for EISA slot 3
Jun 1 12:50:58 ubuntu kernel: [ 35.556039] Cannot allocate resource for EISA slot 4
Jun 1 12:50:58 ubuntu kernel: [ 35.556113] Cannot allocate resource for EISA slot 5
Jun 1 12:50:58 ubuntu kernel: [ 35.556198] EISA: Detected 0 cards.
Jun 1 12:50:58 ubuntu kernel: [ 35.556275] cpuidle: using governor ladder
Jun 1 12:50:58 ubuntu kernel: [ 35.556348] cpuidle: using governor menu
Jun 1 12:50:58 ubuntu kernel: [ 35.556493] NET: Registered protocol family 1
Jun 1 12:50:58 ubuntu kernel: [ 35.556601] Using IPI No-Shortcut mode
Jun 1 12:50:58 ubuntu kernel: [ 35.556702] registered taskstats version 1
Jun 1 12:50:58 ubuntu kernel: [ 35.556869] Magic number: 12:133:834
Jun 1 12:50:58 ubuntu kernel: [ 35.556977] hash matches device ptyu0
Jun 1 12:50:58 ubuntu kernel: [ 35.557078] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Jun 1 12:50:58 ubuntu kernel: [ 35.557157] EDD information not available.
Jun 1 12:50:58 ubuntu kernel: [ 35.557412] Freeing unused kernel memory: 364k freed
Jun 1 12:50:58 ubuntu kernel: [ 35.589064] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Jun 1 12:50:58 ubuntu kernel: [ 36.740997] fuse init (API version 7.9)
Jun 1 12:50:58 ubuntu kernel: [ 36.752062] ACPI: Transitioning device [FAN0] to D3
Jun 1 12:50:58 ubuntu kernel: [ 36.752065] ACPI: Transitioning device [FAN0] to D3
Jun 1 12:50:58 ubuntu kernel: [ 36.752068] ACPI: Fan [FAN0] (off)
Jun 1 12:50:58 ubuntu kernel: [ 36.756451] ACPI: SSDT 7FE794D6, 023D (r1 PmRef Cpu0Ist 3000 INTL 20050624)
Jun 1 12:50:58 ubuntu kernel: [ 36.756645] ACPI: SSDT 7FE78F8F, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Jun 1 12:50:58 ubuntu kernel: [ 36.773882] Monitor-Mwait will be used to enter C-1 state
Jun 1 12:50:58 ubuntu kernel: [ 36.773885] Monitor-Mwait will be used to enter C-2 state
Jun 1 12:50:58 ubuntu kernel: [ 36.773887] Monitor-Mwait will be used to enter C-3 state
Jun 1 12:50:58 ubuntu kernel: [ 36.774008] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Jun 1 12:50:58 ubuntu kernel: [ 36.774013] ACPI: Processor [CPU0] (supports 8 throttling states)
Jun 1 12:50:58 ubuntu kernel: [ 36.774215] ACPI: SSDT 7FE79713, 00BD (r1 PmRef Cpu1Ist 3000 INTL 20050624)
Jun 1 12:50:58 ubuntu kernel: [ 36.774399] ACPI: SSDT 7FE79451, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
Jun 1 12:50:58 ubuntu kernel: [ 36.775338] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Jun 1 12:50:58 ubuntu kernel: [ 36.775343] ACPI: Processor [CPU1] (supports 8 throttling states)
Jun 1 12:50:58 ubuntu kernel: [ 36.776364] ACPI: Thermal Zone [TZ00] (52 C)
Jun 1 12:50:58 ubuntu kernel: [ 36.776853] ACPI: Invalid passive threshold
Jun 1 12:50:58 ubuntu kernel: [ 36.777362] ACPI: Transitioning device [FAN0] to D0
Jun 1 12:50:58 ubuntu kernel: [ 36.777364] ACPI: Transitioning device [FAN0] to D0
Jun 1 12:50:58 ubuntu kernel: [ 36.777365] ACPI: Unable to turn cooling device [f7c4bb40] 'on'
Jun 1 12:50:58 ubuntu kernel: [ 36.777368] ACPI: Thermal Zone [TZ01] (57 C)
Jun 1 12:50:58 ubuntu kernel: [ 37.168823] usbcore: registered new interface driver usbfs
Jun 1 12:50:58 ubuntu kernel: [ 37.168845] usbcore: registered new interface driver hub
Jun 1 12:50:58 ubuntu kernel: [ 37.169699] usbcore: registered new device driver usb
Jun 1 12:50:58 ubuntu kernel: [ 37.179578] USB Universal Host Controller Interface driver v3.0
Jun 1 12:50:58 ubuntu kernel: [ 37.179631] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
Jun 1 12:50:58 ubuntu kernel: [ 37.179642] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jun 1 12:50:58 ubuntu kernel: [ 37.179645] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jun 1 12:50:58 ubuntu kernel: [ 37.179883] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jun 1 12:50:58 ubuntu kernel: [ 37.179913] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
Jun 1 12:50:58 ubuntu kernel: [ 37.180024] usb usb1: configuration #1 chosen from 1 choice
Jun 1 12:50:58 ubuntu kernel: [ 37.180044] hub 1-0:1.0: USB hub found
Jun 1 12:50:58 ubuntu kernel: [ 37.180048] hub 1-0:1.0: 2 ports detected
Jun 1 12:50:58 ubuntu kernel: [ 37.189627] SCSI subsystem initialized
Jun 1 12:50:58 ubuntu kernel: [ 37.218151] libata version 3.00 loaded.
Jun 1 12:50:58 ubuntu kernel: [ 37.273254] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
Jun 1 12:50:58 ubuntu kernel: [ 37.273258] e100: Copyright(c) 1999-2006 Intel Corporation
Jun 1 12:50:58 ubuntu kernel: [ 37.283466] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 20
Jun 1 12:50:58 ubuntu kernel: [ 37.283479] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jun 1 12:50:58 ubuntu kernel: [ 37.283483] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jun 1 12:50:58 ubuntu kernel: [ 37.283505] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jun 1 12:50:58 ubuntu kernel: [ 37.283536] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
Jun 1 12:50:58 ubuntu kernel: [ 37.283639] usb usb2: configuration #1 chosen from 1 choice
Jun 1 12:50:58 ubuntu kernel: [ 37.283659] hub 2-0:1.0: USB hub found
Jun 1 12:50:58 ubuntu kernel: [ 37.283663] hub 2-0:1.0: 2 ports detected
Jun 1 12:50:58 ubuntu kernel: [ 37.387408] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 1 12:50:58 ubuntu kernel: [ 37.387420] PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jun 1 12:50:58 ubuntu kernel: [ 37.387424] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun 1 12:50:58 ubuntu kernel: [ 37.387444] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jun 1 12:50:58 ubuntu kernel: [ 37.387474] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
Jun 1 12:50:58 ubuntu kernel: [ 37.387571] usb usb3: configuration #1 chosen from 1 choice
Jun 1 12:50:58 ubuntu kernel: [ 37.387592] hub 3-0:1.0: USB hub found
Jun 1 12:50:58 ubuntu kernel: [ 37.387596] hub 3-0:1.0: 2 ports detected
Jun 1 12:50:58 ubuntu kernel: [ 37.494329] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
Jun 1 12:50:58 ubuntu kernel: [ 37.494337] PCI: Setting latency timer of device 0000:00:1d.3 to 64
Jun 1 12:50:58 ubuntu kernel: [ 37.494341] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jun 1 12:50:58 ubuntu kernel: [ 37.494360] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Jun 1 12:50:58 ubuntu kernel: [ 37.494390] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
Jun 1 12:50:58 ubuntu kernel: [ 37.494489] usb usb4: configuration #1 chosen from 1 choice
Jun 1 12:50:58 ubuntu kernel: [ 37.494510] hub 4-0:1.0: USB hub found
Jun 1 12:50:58 ubuntu kernel: [ 37.494513] hub 4-0:1.0: 2 ports detected
Jun 1 12:50:58 ubuntu kernel: [ 37.599203] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
Jun 1 12:50:58 ubuntu kernel: [ 37.599217] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jun 1 12:50:58 ubuntu kernel: [ 37.599221] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jun 1 12:50:58 ubuntu kernel: [ 37.599241] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Jun 1 12:50:58 ubuntu kernel: [ 37.603143] ehci_hcd 0000:00:1d.7: debug port 1
Jun 1 12:50:58 ubuntu kernel: [ 37.603150] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Jun 1 12:50:58 ubuntu kernel: [ 37.603155] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf0c04000
Jun 1 12:50:58 ubuntu kernel: [ 37.618166] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 1 12:50:58 ubuntu kernel: [ 37.618279] usb usb5: configuration #1 chosen from 1 choice
Jun 1 12:50:58 ubuntu kernel: [ 37.618300] hub 5-0:1.0: USB hub found
Jun 1 12:50:58 ubuntu kernel: [ 37.618305] hub 5-0:1.0: 8 ports detected
Jun 1 12:50:58 ubuntu kernel: [ 37.718290] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 21
Jun 1 12:50:58 ubuntu kernel: [ 37.745971] e100: eth0: e100_probe: addr 0xf0905000, irq 21, MAC addr 00:a0:d1:6e:45:5f
Jun 1 12:50:58 ubuntu kernel: [ 37.745993] ata_piix 0000:00:1f.2: version 2.12
Jun 1 12:50:58 ubuntu kernel: [ 37.746000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Jun 1 12:50:58 ubuntu kernel: [ 37.898050] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 20
Jun 1 12:50:58 ubuntu kernel: [ 37.898078] PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jun 1 12:50:58 ubuntu kernel: [ 37.898181] scsi0 : ata_piix
Jun 1 12:50:58 ubuntu kernel: [ 37.898321] scsi1 : ata_piix
Jun 1 12:50:58 ubuntu kernel: [ 37.899110] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
Jun 1 12:50:58 ubuntu kernel: [ 37.899113] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
Jun 1 12:50:58 ubuntu kernel: [ 38.013944] Clocksource tsc unstable (delta = -6649038627 ns)
Jun 1 12:50:58 ubuntu kernel: [ 38.018125] Time: hpet clocksource has been installed.
Jun 1 12:50:58 ubuntu kernel: [ 38.027737] ata1.00: ATA-7: FUJITSU MHV2200BT PL, 00000050, max UDMA/100
Jun 1 12:50:58 ubuntu kernel: [ 38.027745] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jun 1 12:50:58 ubuntu kernel: [ 38.029114] ata1.00: configured for UDMA/100
Jun 1 12:50:58 ubuntu kernel: [ 38.030636] usb 5-3: new high speed USB device using ehci_hcd and address 2
Jun 1 12:50:58 ubuntu kernel: [ 38.314977] ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, PT06, max UDMA/33
Jun 1 12:50:58 ubuntu kernel: [ 38.487057] ata2.00: configured for UDMA/33
Jun 1 12:50:58 ubuntu kernel: [ 38.487221] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2200B 0000 PQ: 0 ANSI: 5
Jun 1 12:50:58 ubuntu kernel: [ 38.491014] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N PT06 PQ: 0 ANSI: 5
Jun 1 12:50:58 ubuntu kernel: [ 38.491426] ACPI: PCI Interrupt 0000:07:06.1[b] -> GSI 17 (level, low) -> IRQ 17
Jun 1 12:50:58 ubuntu kernel: [ 38.541118] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f0906000-f09067ff] Max Packet=[2048] IR/IT contexts=[4/8]
Jun 1 12:50:58 ubuntu kernel: [ 38.550104] Driver 'sd' needs updating - please use bus_type methods
Jun 1 12:50:58 ubuntu kernel: [ 38.550158] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
Jun 1 12:50:58 ubuntu kernel: [ 38.550169] sd 0:0:0:0: [sda] Write Protect is off
Jun 1 12:50:58 ubuntu kernel: [ 38.550171] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 1 12:50:58 ubuntu kernel: [ 38.550185] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 1 12:50:58 ubuntu kernel: [ 38.550225] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
Jun 1 12:50:58 ubuntu kernel: [ 38.550233] sd 0:0:0:0: [sda] Write Protect is off
Jun 1 12:50:58 ubuntu kernel: [ 38.550235] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 1 12:50:58 ubuntu kernel: [ 38.550248] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 1 12:50:58 ubuntu kernel: [ 38.550252] sda:<4>Driver 'sr' needs updating - please use bus_type methods
Jun 1 12:50:58 ubuntu kernel: [ 38.701110] usb 5-3: configuration #1 chosen from 1 choice
Jun 1 12:50:58 ubuntu kernel: [ 38.882271] usbcore: registered new interface driver libusual
Jun 1 12:50:58 ubuntu kernel: [ 38.883492] sda1 sda2 sda3
Jun 1 12:50:58 ubuntu kernel: [ 38.883567] sd 0:0:0:0: [sda] Attached SCSI disk
Jun 1 12:50:58 ubuntu kernel: [ 38.887929] Initializing USB Mass Storage driver...
Jun 1 12:50:58 ubuntu kernel: [ 38.889805] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jun 1 12:50:58 ubuntu kernel: [ 38.889821] sr 1:0:0:0: Attached scsi generic sg1 type 5
Jun 1 12:50:58 ubuntu kernel: [ 38.904097] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 1 12:50:58 ubuntu kernel: [ 38.904100] Uniform CD-ROM driver Revision: 3.20
Jun 1 12:50:58 ubuntu kernel: [ 38.904139] sr 1:0:0:0: Attached scsi CD-ROM sr0
Jun 1 12:50:58 ubuntu kernel: [ 39.121976] usb 3-2: new low speed USB device using uhci_hcd and address 2
Jun 1 12:50:58 ubuntu kernel: [ 39.253687] usb 3-2: configuration #1 chosen from 1 choice
Jun 1 12:50:58 ubuntu kernel: [ 39.255983] scsi2 : SCSI emulation for USB Mass Storage devices
Jun 1 12:50:58 ubuntu kernel: [ 39.256429] usbcore: registered new interface driver usb-storage
Jun 1 12:50:58 ubuntu kernel: [ 39.256432] USB Mass Storage support registered.
Jun 1 12:50:58 ubuntu kernel: [ 39.256500] usb-storage: device found at 2
Jun 1 12:50:58 ubuntu kernel: [ 39.256503] usb-storage: waiting for device to settle before scanning
Jun 1 12:50:58 ubuntu kernel: [ 39.268313] usbcore: registered new interface driver hiddev
Jun 1 12:50:58 ubuntu kernel: [ 39.273614] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input2
Jun 1 12:50:58 ubuntu kernel: [ 39.278148] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2
Jun 1 12:50:58 ubuntu kernel: [ 39.278170] usbcore: registered new interface driver usbhid
Jun 1 12:50:58 ubuntu kernel: [ 39.278175] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Jun 1 12:50:58 ubuntu kernel: [ 39.306350] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d16e455f]
Jun 1 12:50:58 ubuntu kernel: [ 39.516619] usb-storage: device scan complete
Jun 1 12:50:58 ubuntu kernel: [ 39.531233] scsi 2:0:0:0: Direct-Access JetFlash TS4GJFV35 8.01 PQ: 0 ANSI: 2
Jun 1 12:50:58 ubuntu kernel: [ 39.533910] sd 2:0:0:0: [sdb] 7987200 512-byte hardware sectors (4089 MB)
Jun 1 12:50:58 ubuntu kernel: [ 39.535067] sd 2:0:0:0: [sdb] Write Protect is off
Jun 1 12:50:58 ubuntu kernel: [ 39.535070] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
Jun 1 12:50:58 ubuntu kernel: [ 39.535072] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Jun 1 12:50:58 ubuntu kernel: [ 39.537532] sd 2:0:0:0: [sdb] 7987200 512-byte hardware sectors (4089 MB)
Jun 1 12:50:58 ubuntu kernel: [ 39.538150] sd 2:0:0:0: [sdb] Write Protect is off
Jun 1 12:50:58 ubuntu kernel: [ 39.538152] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
Jun 1 12:50:58 ubuntu kernel: [ 39.538154] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Jun 1 12:50:58 ubuntu kernel: [ 39.538156] sdb: sdb1 sdb2
Jun 1 12:50:58 ubuntu kernel: [ 39.539101] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Jun 1 12:50:58 ubuntu kernel: [ 39.539133] sd 2:0:0:0: Attached scsi generic sg2 type 0
Jun 1 12:50:58 ubuntu kernel: [ 41.472525] kjournald starting. Commit interval 5 seconds
Jun 1 12:50:58 ubuntu kernel: [ 41.472536] EXT3-fs: mounted filesystem with ordered data mode.
Jun 1 12:50:58 ubuntu kernel: [ 41.491778] Registering unionfs 1.4
Jun 1 12:50:58 ubuntu kernel: [ 41.491781] unionfs: debugging is not enabled
Jun 1 12:50:58 ubuntu kernel: [ 41.497415] loop: module loaded
Jun 1 12:50:58 ubuntu kernel: [ 41.557638] squashfs: version 3.3 (2007/10/31) Phillip Lougher
Jun 1 12:50:58 ubuntu kernel: [ 42.063301] kjournald starting. Commit interval 5 seconds
Jun 1 12:50:58 ubuntu kernel: [ 42.072951] EXT3 FS on sdb2, internal journal
Jun 1 12:50:58 ubuntu kernel: [ 42.072955] EXT3-fs: mounted filesystem with ordered data mode.
Jun 1 12:50:58 ubuntu kernel: [ 55.758243] ACPI: Battery Slot [BAT0] (battery present)
Jun 1 12:50:58 ubuntu kernel: [ 69.179714] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jun 1 12:50:58 ubuntu kernel: [ 69.459965] input: Power Button (FF) as /devices/virtual/input/input3
Jun 1 12:50:58 ubuntu kernel: [ 69.487962] ACPI: Power Button (FF) [PWRF]
Jun 1 12:50:58 ubuntu kernel: [ 69.488028] input: Lid Switch as /devices/virtual/input/input4
Jun 1 12:50:58 ubuntu kernel: [ 69.488103] ACPI: Lid Switch [LID]
Jun 1 12:50:58 ubuntu kernel: [ 69.488147] input: Power Button (CM) as /devices/virtual/input/input5
Jun 1 12:50:58 ubuntu kernel: [ 69.503903] ACPI: Power Button (CM) [PWRB]
Jun 1 12:50:58 ubuntu kernel: [ 69.560296] ACPI: AC Adapter [ADP0] (on-line)
Jun 1 12:50:58 ubuntu kernel: [ 71.100063] iTCO_vendor_support: vendor-support=0
Jun 1 12:50:58 ubuntu kernel: [ 71.834890] input: PC Speaker as /devices/platform/pcspkr/input/input6
Jun 1 12:50:58 ubuntu kernel: [ 72.341167] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10]
Jun 1 12:50:58 ubuntu kernel: [ 72.341192] Yenta: Enabling burst memory read transactions
Jun 1 12:50:58 ubuntu kernel: [ 72.341197] Yenta: Using CSCINT to route CSC interrupts to PCI
Jun 1 12:50:58 ubuntu kernel: [ 72.341199] Yenta: Routing CardBus interrupts to PCI
Jun 1 12:50:58 ubuntu kernel: [ 72.341205] Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66
Jun 1 12:50:58 ubuntu kernel: [ 72.451182] Linux agpgart interface v0.102
Jun 1 12:50:58 ubuntu kernel: [ 72.469483] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
Jun 1 12:50:58 ubuntu kernel: [ 72.574883] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
Jun 1 12:50:58 ubuntu kernel: [ 72.574889] Socket status: 30000006
Jun 1 12:50:58 ubuntu kernel: [ 72.574891] Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b
Jun 1 12:50:58 ubuntu kernel: [ 72.574896] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
Jun 1 12:50:58 ubuntu kernel: [ 72.574898] cs: IO port probe 0x5000-0x5fff: clean.
Jun 1 12:50:58 ubuntu kernel: [ 72.575125] pcmcia: parent PCI bridge Memory window: 0xf0900000 - 0xf09fffff
Jun 1 12:50:58 ubuntu kernel: [ 72.582274] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jun 1 12:50:58 ubuntu kernel: [ 72.594876] ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> IRQ 18
Jun 1 12:50:58 ubuntu kernel: [ 72.649070] sdhci: Secure Digital Host Controller Interface driver
Jun 1 12:50:58 ubuntu kernel: [ 72.649075] sdhci: Copyright(c) Pierre Ossman
Jun 1 12:50:58 ubuntu kernel: [ 72.649108] sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0)
Jun 1 12:50:58 ubuntu kernel: [ 72.649127] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 18
Jun 1 12:50:58 ubuntu kernel: [ 72.649185] mmc0: SDHCI at 0xf0906800 irq 18 DMA
Jun 1 12:50:58 ubuntu kernel: [ 72.701993] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Jun 1 12:50:58 ubuntu kernel: [ 72.723805] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
Jun 1 12:50:58 ubuntu kernel: [ 72.770553] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Jun 1 12:50:58 ubuntu kernel: [ 72.778033] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Jun 1 12:50:58 ubuntu kernel: [ 73.068529] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
Jun 1 12:50:58 ubuntu kernel: [ 73.068534] iwl3945: Copyright(c) 2003-2007 Intel Corporation
Jun 1 12:50:58 ubuntu kernel: [ 73.068667] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
Jun 1 12:50:58 ubuntu kernel: [ 73.068682] PCI: Setting latency timer of device 0000:05:00.0 to 64
Jun 1 12:50:58 ubuntu kernel: [ 73.068700] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Jun 1 12:50:58 ubuntu kernel: [ 73.188700] cs: IO port probe 0x100-0x3af: clean.
Jun 1 12:50:58 ubuntu kernel: [ 73.190679] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
Jun 1 12:50:58 ubuntu kernel: [ 73.191479] cs: IO port probe 0x820-0x8ff: clean.
Jun 1 12:50:58 ubuntu kernel: [ 73.192152] cs: IO port probe 0xc00-0xcf7: clean.
Jun 1 12:50:58 ubuntu kernel: [ 73.192986] cs: IO port probe 0xa00-0xaff: clean.
Jun 1 12:50:58 ubuntu kernel: [ 73.212876] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
Jun 1 12:50:58 ubuntu kernel: [ 73.213206] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
Jun 1 12:50:58 ubuntu kernel: [ 73.242562] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
Jun 1 12:50:58 ubuntu kernel: [ 73.242585] PCI: Setting latency timer of device 0000:00:1b.0 to 64
Jun 1 12:50:58 ubuntu kernel: [ 73.275478] hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
Jun 1 12:50:58 ubuntu kernel: [ 73.314027] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
Jun 1 12:50:58 ubuntu kernel: [ 73.314038] synaptics: Toshiba Satellite A100 detected, limiting rate to 40pps.
Jun 1 12:50:58 ubuntu kernel: [ 73.346304] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
Jun 1 12:50:58 ubuntu kernel: [ 73.374843] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
Jun 1 12:50:58 ubuntu kernel: [ 73.374880] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jun 1 12:50:58 ubuntu kernel: [ 73.410318] intel_rng: FWH not detected
Jun 1 12:50:58 ubuntu kernel: [ 73.668517] device-mapper: uevent: version 1.0.3
Jun 1 12:50:58 ubuntu kernel: [ 73.668544] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
Jun 1 12:50:58 ubuntu kernel: [ 74.191146] ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 1 12:50:58 ubuntu kernel: [ 74.848411] ACPI: Error installing notify handler
Jun 1 12:50:58 ubuntu kernel: [ 74.848463] No dock devices found.
Jun 1 12:50:59 ubuntu kernel: [ 76.200730] apm: BIOS not found.
Jun 1 12:50:59 ubuntu kernel: [ 76.285633] lp: driver loaded but no devices found
Jun 1 12:50:59 ubuntu kernel: [ 76.339284] ppdev: user-space parallel port driver
Jun 1 12:51:00 ubuntu kernel: [ 78.051401] Bluetooth: Core ver 2.11
Jun 1 12:51:00 ubuntu kernel: [ 78.051821] NET: Registered protocol family 31
Jun 1 12:51:00 ubuntu kernel: [ 78.051823] Bluetooth: HCI device and connection manager initialized
Jun 1 12:51:00 ubuntu kernel: [ 78.051827] Bluetooth: HCI socket layer initialized
Jun 1 12:51:00 ubuntu kernel: [ 78.075443] Bluetooth: L2CAP ver 2.9
Jun 1 12:51:00 ubuntu kernel: [ 78.075447] Bluetooth: L2CAP socket layer initialized
Jun 1 12:51:00 ubuntu kernel: [ 78.130281] Bluetooth: RFCOMM socket layer initialized
Jun 1 12:51:00 ubuntu kernel: [ 78.130291] Bluetooth: RFCOMM TTY layer initialized
Jun 1 12:51:00 ubuntu kernel: [ 78.130293] Bluetooth: RFCOMM ver 1.8
Jun 1 12:53:22 ubuntu kernel: [ 88.104734] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.104828] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.104919] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.105003] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.105089] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.105174] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.105259] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.105343] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.105429] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.105526] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.105620] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.105715] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.105809] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.105905] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.106000] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.106095] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.106193] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.106287] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.106381] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.106476] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.106574] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.106668] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.106763] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.106858] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.106954] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.107049] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.107150] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.107245] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.107339] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.107434] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.107529] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.107622] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.107718] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.107814] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.107909] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.108003] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.108110] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.108206] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.108302] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.108395] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.108489] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.108584] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.108682] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.108776] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.108872] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.108967] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.109062] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.109155] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.109251] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.109348] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.109444] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.109540] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.109633] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.109729] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.109825] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.109919] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.110012] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.110108] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.110204] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.110300] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.110396] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.110490] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.110585] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.110679] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.110775] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.110869] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.110965] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.111064] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.111159] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.111253] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.111349] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.111447] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.111542] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.111637] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.111733] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.111829] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.111925] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.112019] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.112123] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.112215] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.112311] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.112405] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.112502] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.112595] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.112691] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.112786] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.112880] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.112975] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.113074] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.113169] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.113268] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.113364] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.113458] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.113554] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.113649] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.113742] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.113838] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.113933] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.114027] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.114123] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.114219] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.114313] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.114411] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.114505] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.114600] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.114696] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.114791] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.114884] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.114980] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.115079] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.115176] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.115270] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.115366] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.115462] vt: argh, driver_data is NULL !
Jun 1 12:53:22 ubuntu kernel: [ 88.115558] vt: argh, driver_data is NULL !

ouf! c'est tout

frafa · Le 01/06/2008, à 16:55

==> gnovel
stp utilise la balises Quote
ca la tu rend la page du post illisible!

frafa · Le 01/06/2008, à 17:22

==> trajan
lo,
merci

#tu lance le script en mode custom et quand xnest est ouvert 
#tu ouvre un terminal puis:
#tu passe en root dans un terminal
sudo -s
#tu te met en chroot
chroot /mnt/tmp_modif_liveusb
export LANG="$(cat /opt/lang.txt)"
export HOME=/home/liveusb
export LC_ALL=C
export DISPLAY=localhost:5.0
#a partir de là tu peut utiliser les commandes habituelles
#sauf `uname -r` remplacer par $(cat /opt/kernel-version.txt)
#voir doc
#http://doc.ubuntu-fr.org/tutoriel/installer_un_theme_usplash
#pas testé changement de usplash moi...

frafa · Le 01/06/2008, à 17:24

==> Oliv7
salut

yes c'est l'avenir c'est sur
live-magic
live-helper
live-initramfs

trajan · Le 01/06/2008, à 17:41

Petit retour. Je tente de créer un live-cd perso. J'ai une erreur au moment de la personnalisation des icones, je clique sur OK, et le process est annulé. Je vais retenter une 3° fois au cas ou :

zenity --info --text "Modifiez la position des icones des tableau de bord,
> Attention!
> ne pas activer de soft ni de reglages du menu systeme
> sous peine de boger le liveusb.
> Placez les applet a droite a gauche en haut en bas, mais jamais au milieu!
> verouillez les applet apres leur placement.
>
> une fois vos modifications effectuees,
> cliquez sur le bouton ok de cette fenetre
> pour poursuivre le script"
root@lemon:~# exit
./live_custom.sh: line 341: 5865 Done { echo "1"; while true; do
sleep 1; echo "zzZZzz"; if ! [ -e "/tmp/Log_liveusb.txt" ]; then
break;
fi;
done; echo "100"; }
5867 Processus arrêté | zenity --progress --pulsate --text "${MESSAGE}" --width 600 --auto-close
Process annulé par utilisateur: chargement de gnome-panel
rm: ne peut enlever `/tmp/Log_liveusb.txt': Aucun fichier ou dossier de ce type
Processus arrêté

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1026 Le 29/05/2008, à 22:27

Re : Customisation/Création de Live CD/USB

#1027 Le 29/05/2008, à 22:58

Re : Customisation/Création de Live CD/USB

#1028 Le 30/05/2008, à 01:07

Re : Customisation/Création de Live CD/USB

#1029 Le 30/05/2008, à 09:20

Re : Customisation/Création de Live CD/USB

#1030 Le 30/05/2008, à 09:29

Re : Customisation/Création de Live CD/USB

#1031 Le 30/05/2008, à 11:30

Re : Customisation/Création de Live CD/USB

#1032 Le 30/05/2008, à 17:53

Re : Customisation/Création de Live CD/USB

#1033 Le 31/05/2008, à 01:14

Re : Customisation/Création de Live CD/USB

#1034 Le 31/05/2008, à 06:30

Re : Customisation/Création de Live CD/USB

#1035 Le 31/05/2008, à 13:57

Re : Customisation/Création de Live CD/USB

#1036 Le 31/05/2008, à 15:37

Re : Customisation/Création de Live CD/USB

#1037 Le 31/05/2008, à 17:14

Re : Customisation/Création de Live CD/USB

#1038 Le 31/05/2008, à 17:32

Re : Customisation/Création de Live CD/USB

#1039 Le 31/05/2008, à 18:14

Re : Customisation/Création de Live CD/USB

#1040 Le 31/05/2008, à 21:30

Re : Customisation/Création de Live CD/USB

#1041 Le 31/05/2008, à 21:38

Re : Customisation/Création de Live CD/USB

#1042 Le 31/05/2008, à 21:44

Re : Customisation/Création de Live CD/USB

#1043 Le 01/06/2008, à 00:00

Re : Customisation/Création de Live CD/USB

#1044 Le 01/06/2008, à 09:58

Re : Customisation/Création de Live CD/USB

#1045 Le 01/06/2008, à 13:01

Re : Customisation/Création de Live CD/USB

#1046 Le 01/06/2008, à 14:26

Re : Customisation/Création de Live CD/USB

#1047 Le 01/06/2008, à 16:55

Re : Customisation/Création de Live CD/USB

#1048 Le 01/06/2008, à 17:22

Re : Customisation/Création de Live CD/USB

#1049 Le 01/06/2008, à 17:24

Re : Customisation/Création de Live CD/USB

#1050 Le 01/06/2008, à 17:41

Re : Customisation/Création de Live CD/USB

Pied de page des forums