#26 Le 29/01/2015, à 18:14
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
c'est bon, je suis de retour.
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#27 Le 29/01/2015, à 18:22
- nany
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bon, regardons ce fichier une bonne fois :
nl -ba /etc/default/grubDonne aussi le retour des commandes suivantes :
sudo apt-get install linux-firmware-nonfree
sudo apt-get install intel-microcodeHors ligne
#28 Le 29/01/2015, à 18:32
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
nl -ba /etc/default/grub
nl -ba /etc/default/grub
1 # If you change this file, run 'update-grub' afterwards to update
2 # /boot/grub/grub.cfg.
3 # For full documentation of the options in this file, see:
4 # info -f grub -n 'Simple configuration'
5
6 GRUB_DEFAULT=0
7 GRUB_HIDDEN_TIMEOUT=0
8 GRUB_HIDDEN_TIMEOUT_QUIET=true
9 GRUB_TIMEOUT=10
10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
11 GRUB_CMDLINE_LINUX_DEFAULT="splash quiet tpm_tis.force=1"
12 GRUB_CMDLINE_LINUX=""
13
14 # Uncomment to enable BadRAM filtering, modify to suit your needs
15 # This works with Linux (no patch required) and with any kernel that obtains
16 # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
17 #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
18
19 # Uncomment to disable graphical terminal (grub-pc only)
20 #GRUB_TERMINAL=console
21
22 # The resolution used on graphical terminal
23 # note that you can use only modes which your graphic card supports via VBE
24 # you can see them in real GRUB with the command `vbeinfo'
25 #GRUB_GFXMODE=640x480
26
27 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
28 #GRUB_DISABLE_LINUX_UUID=true
29
30 # Uncomment to disable generation of recovery mode menu entries
31 #GRUB_DISABLE_RECOVERY="true"
32
33 # Uncomment to get a beep at grub start
34 #GRUB_INIT_TUNE="480 440 1"
35 GRUB_GFXPAYLOAD_LINUX=Nonesudo apt-get install linux-firmware-nonfree
sudo apt-get install linux-firmware-nonfree
[sudo] password for jean8v32:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
linux-firmware-nonfree est déjà la plus récente version disponible.
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
linux-image-3.13.0-41-generic linux-image-extra-3.13.0-41-generic
Veuillez utiliser « apt-get autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 18 non mis à jour.sudo apt-get install intel-microcode
sudo apt-get install intel-microcode
[sudo] password for jean8v32:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
linux-image-3.13.0-41-generic linux-image-extra-3.13.0-41-generic
Veuillez utiliser « apt-get autoremove » pour les supprimer.
Les paquets supplémentaires suivants seront installés :
iucode-tool
Les NOUVEAUX paquets suivants seront installés :
intel-microcode iucode-tool
0 mis à jour, 2 nouvellement installés, 0 à enlever et 18 non mis à jour.
Il est nécessaire de prendre 417 ko dans les archives.
Après cette opération, 654 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de : 1 http://fr.archive.ubuntu.com/ubuntu/ trusty/multiverse iucode-tool amd64 1.0.1-1 [28,1 kB]
Réception de : 2 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/multiverse intel-microcode amd64 2.20140624-t-1ubuntu2 [389 kB]
417 ko réceptionnés en 2s (198 ko/s)
Sélection du paquet iucode-tool précédemment désélectionné.
(Lecture de la base de données... 596352 fichiers et répertoires déjà installés.)
Préparation du décompactage de .../iucode-tool_1.0.1-1_amd64.deb ...
Décompactage de iucode-tool (1.0.1-1) ...
Sélection du paquet intel-microcode précédemment désélectionné.
Préparation du décompactage de .../intel-microcode_2.20140624-t-1ubuntu2_amd64.deb ...
Décompactage de intel-microcode (2.20140624-t-1ubuntu2) ...
Traitement déclenché pour man-db (2.6.7.1-1ubuntu1) ...
Paramétrage de iucode-tool (1.0.1-1) ...
Paramétrage de intel-microcode (2.20140624-t-1ubuntu2) ...
Updating microcode on all online processors...
update-initramfs: deferring update (trigger activated)
Traitement déclenché pour initramfs-tools (0.103ubuntu4.2) ...
update-initramfs: Generating /boot/initrd.img-3.13.0-43-genericSaphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#29 Le 29/01/2015, à 18:49
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
J'ai redemarré, mais toujours pareil.
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#30 Le 29/01/2015, à 19:15
- nany
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bon, ça a bien l’air d’être cet usb 8-2 qui pose problème.
[ 49.155680] usb 8-2: device descriptor read/64, error -110
[ 64.363050] usb 8-2: device descriptor read/64, error -110
[ 64.578934] usb 8-2: new full-speed USB device number 4 using uhci_hcd
[ 74.981109] usb 8-2: device not accepting address 4, error -110
[ 75.093174] usb 8-2: new full-speed USB device number 5 using uhci_hcd
[ 85.495302] usb 8-2: device not accepting address 5, error -110Essaye ça :
sudo sed -i 's/tpm_tis.force=1/uhci-hcd.ignore_oc=yes/' /etc/default/grub
sudo update-grubEt redémarre pour voir s’il y a du changement.
Hors ligne
#31 Le 29/01/2015, à 19:33
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
apres les 2 dernieres commandes et le redemarrage, il y'a 5 secondes de moins que le précedent redemarrage.
En passant, je cherchant "ubuntu analyse temps demarrage" sur google,
j'ai trouvé ceci : https://doc.ubuntu-fr.org/bootchart
Je l'ai installé et au redemarrége, il m'a généré un rapport en fichier image (.png) montrant le temps de démarrage de chaque application se lançant au démarrage (avant ou après grub ? surement après).
J'ai donc cete image mais je ne sais pas comment vous l'envoyer. par dl.free.fr ?
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#32 Le 29/01/2015, à 19:46
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
J'ai posté les rapports sur le site de free.
IL y'a 2 images (png) dans un fichier .7z
- le 2eme est le rapport genéré apres l'exécution des commandes :
sudo sed -i 's/tpm_tis.force=1/uhci-hcd.ignore_oc=yes/' /etc/default/grub
sudo update-grubLien de téléchargement : http://dl.free.fr/h66pZDoAy
C'est domage que les rapports soient image, ce qui oblige de zoomer a maximum pour mieux voir et donc emppeche d'avoir une vu globale (comparative) des application et leur temps.
ça serait largement mmieux le le rapport etait généré en csv (tableur) par exemple, avec juste 3 colonnes :
- nom de l'application
- heure debut
- durée (ou heure de fin
Cela aurait permis une meilleur exploitation du rapport en faisant des trie ou classement par durré d'exécution, par exemple.
Or là, l'image est figé, et donc impossible manipuler les données du rapport.
SInon, c'est une bonne application.
PS : depuis son installation, j'ai constaté une augmentation de 10 secondes au temps de démarrage. Ce qui est normal puisque bootchart s'exécute également au demarrage.
MAis une fois le probleme resolu, je desinstallerai pour récupere ses 10 précieuses secondes 
Dernière modification par ngmsky (Le 29/01/2015, à 19:58)
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#33 Le 29/01/2015, à 20:23
- nany
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Oui, j’avoue que bootchart a une utilité limitée car un peu l’interprétation des graphiques me semble plutôt complexe.
Il vaudrait mieux continuer en repostant un dmesg juste après un redémarrage.
Hors ligne
#34 Le 29/01/2015, à 20:29
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
ok merci,
voici le dernier dmesg après redemarrage :
[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-43-generic (buildd@tipua) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #72-Ubuntu SMP Mon Dec 8 19:35:06 UTC 2014 (Ubuntu 3.13.0-43.72-generic 3.13.11.11)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic root=UUID=5ccb7f75-6b15-4dd9-bee2-c9334c1f650d ro splash quiet uhci-hcd.ignore_oc=yes
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf78dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf78e000-0x00000000bf7cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ec000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: /PURE BLACK X58, BIOS 080016 09/28/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-E7FFF write-through
[ 0.000000] E8000-EBFFF write-protect
[ 0.000000] EC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 8184M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 1GB, type WB
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34c08000-0x365fbfff]
[ 0.000000] ACPI: RSDP 00000000000fa140 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 000054 (v01 092811 XSDT1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v04 092811 FACP1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf780480 005D0F (v02 1AEGH 1AEGHA52 00000A52 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf78e000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000AC (v02 092811 APIC1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780440 00003C (v01 092811 OEMMCFG 20110928 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf78e040 000082 (v01 092811 OEMB1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf78e0d0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf790ce0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
[ 0.000000] NODE_DATA [mem 0x23fff6000-0x23fffafff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x23fffffff]
[ 0.000000] On node 0 totalpages: 2094876
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12190 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 20480 pages used for memmap
[ 0.000000] Normal zone: 1310720 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 12 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf78dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf78e000-0xbf7cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7d0000-0xbf7dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7e0000-0xbf7ebfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7ec000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s82304 r8192 d24192 u131072
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062121
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic root=UUID=5ccb7f75-6b15-4dd9-bee2-c9334c1f650d ro splash quiet uhci-hcd.ignore_oc=yes
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8137804K/8379504K available (7383K kernel code, 1144K rwdata, 3408K rodata, 1336K init, 1444K bss, 241700K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-11.
[ 0.000000] NR_IRQS:16640 nr_irqs:776 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3220.049 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6440.09 BogoMIPS (lpj=12880196)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000032] Security Framework initialized
[ 0.000051] AppArmor: AppArmor initialized
[ 0.000052] Yama: becoming mindful.
[ 0.000587] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002033] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002656] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002666] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002860] Initializing cgroup subsys memory
[ 0.002865] Initializing cgroup subsys devices
[ 0.002867] Initializing cgroup subsys freezer
[ 0.002868] Initializing cgroup subsys blkio
[ 0.002869] Initializing cgroup subsys perf_event
[ 0.002872] Initializing cgroup subsys hugetlb
[ 0.002889] CPU: Physical Processor ID: 0
[ 0.002890] CPU: Processor Core ID: 0
[ 0.002894] mce: CPU supports 9 MCE banks
[ 0.002905] CPU0: Thermal monitoring enabled (TM1)
[ 0.002914] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.002914] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002914] tlb_flushall_shift: 6
[ 0.003001] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.004059] ACPI: Core revision 20131115
[ 0.006526] ACPI: All ACPI Tables successfully acquired
[ 0.028806] ftrace: allocating 28552 entries in 112 pages
[ 0.040432] dmar: Host address width 39
[ 0.040434] dmar: DRHD base: 0x000000fbfff000 flags: 0x0
[ 0.040441] dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f020fa
[ 0.040442] dmar: DRHD base: 0x000000fbffe000 flags: 0x1
[ 0.040448] dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c9078010ef0462 ecap f020fe
[ 0.040449] dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
[ 0.040451] dmar: RMRR base: 0x000000bf7ec000 end: 0x000000bf7fffff
[ 0.040452] dmar: ATSR flags: 0x0
[ 0.040519] This system BIOS has enabled interrupt remapping
[ 0.040519] on a chipset that contains an erratum making that
[ 0.040519] feature unstable. To maintain system stability
[ 0.040519] interrupt remapping is being disabled. Please
[ 0.040519] contact your BIOS vendor for an update
[ 0.040555] Switched APIC routing to physical flat.
[ 0.040966] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080649] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz (fam: 06, model: 1a, stepping: 05)
[ 0.202288] APIC calibration not consistent with PM-Timer: 116ms instead of 100ms
[ 0.202290] APIC delta adjusted to PM-Timer: 838521 (972740)
[ 0.202308] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.202312] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.202313] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.202315] ... version: 3
[ 0.202316] ... bit width: 48
[ 0.202317] ... generic registers: 4
[ 0.202318] ... value mask: 0000ffffffffffff
[ 0.202319] ... max period: 000000007fffffff
[ 0.202320] ... fixed-purpose events: 3
[ 0.202321] ... event mask: 000000070000000f
[ 0.203857] x86: Booting SMP configuration:
[ 0.214406] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.217098] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.227677] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.240889] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.203859] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.296778] x86: Booted up 1 node, 8 CPUs
[ 0.296781] smpboot: Total of 8 processors activated (51520.78 BogoMIPS)
[ 0.301218] devtmpfs: initialized
[ 0.303536] EVM: security.selinux
[ 0.303537] EVM: security.SMACK64
[ 0.303538] EVM: security.ima
[ 0.303538] EVM: security.capability
[ 0.303572] PM: Registering ACPI NVS region [mem 0xbf78e000-0xbf7cffff] (270336 bytes)
[ 0.304274] pinctrl core: initialized pinctrl subsystem
[ 0.304319] regulator-dummy: no parameters
[ 0.304348] RTC time: 19:25:57, date: 01/29/15
[ 0.304374] NET: Registered protocol family 16
[ 0.304451] cpuidle: using governor ladder
[ 0.304453] cpuidle: using governor menu
[ 0.304482] ACPI: bus type PCI registered
[ 0.304483] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.304533] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.304535] PCI: not using MMCONFIG
[ 0.304536] PCI: Using configuration type 1 for base access
[ 0.305260] bio: create slab <bio-0> at 0
[ 0.305376] ACPI: Added _OSI(Module Device)
[ 0.305377] ACPI: Added _OSI(Processor Device)
[ 0.305378] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.305379] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.306661] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.310379] ACPI: SSDT 00000000bf78e210 00244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.310587] ACPI: Dynamic OEM Table Load:
[ 0.310589] ACPI: SSDT (null) 00244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.310652] ACPI: SSDT 00000000bf790660 000678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.310809] ACPI: Dynamic OEM Table Load:
[ 0.310811] ACPI: SSDT (null) 000678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.311053] ACPI: Interpreter enabled
[ 0.311059] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.311068] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.311069] ACPI: Using IOAPIC for interrupt routing
[ 0.311086] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.311913] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.322863] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.322934] ACPI: No dock devices found.
[ 0.327863] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.327867] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.328040] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.328376] PCI host bridge to bus 0000:00
[ 0.328378] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.328380] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.328381] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.328382] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.328384] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.328385] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.328386] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.328396] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.328442] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.328502] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.328551] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.328589] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.328613] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.328661] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.328698] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.328721] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.328770] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.328808] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.328838] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.328883] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.328920] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.328948] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[ 0.328993] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.329031] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.329066] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.329151] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.329235] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.329315] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.329408] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.329450] pci 0000:00:1a.0: reg 0x20: [io 0x8080-0x809f]
[ 0.329537] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.329570] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.329611] pci 0000:00:1a.1: reg 0x20: [io 0x8400-0x841f]
[ 0.329697] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.329726] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.329767] pci 0000:00:1a.2: reg 0x20: [io 0x8480-0x849f]
[ 0.329852] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.329891] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.329914] pci 0000:00:1a.7: reg 0x10: [mem 0xfbaf6000-0xfbaf63ff]
[ 0.330002] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.330046] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.330080] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.330097] pci 0000:00:1b.0: reg 0x10: [mem 0xfbaf8000-0xfbafbfff 64bit]
[ 0.330160] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.330230] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.330301] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.330346] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.330379] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.330448] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.330492] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.330525] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.330566] pci 0000:00:1d.0: reg 0x20: [io 0x8800-0x881f]
[ 0.330651] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.330682] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.330723] pci 0000:00:1d.1: reg 0x20: [io 0x8880-0x889f]
[ 0.330809] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.330839] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.330880] pci 0000:00:1d.2: reg 0x20: [io 0x8c00-0x8c1f]
[ 0.330961] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.330997] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.331020] pci 0000:00:1d.7: reg 0x10: [mem 0xfbafc000-0xfbafc3ff]
[ 0.331108] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.331152] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.331180] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.331257] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.331289] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.331369] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.331378] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.331386] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.331393] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.331485] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a
[ 0.331503] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.331514] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.331524] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.331535] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.331541] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f]
[ 0.331548] pci 0000:00:1f.2: reg 0x24: [io 0xffa0-0xffaf]
[ 0.331647] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.331664] pci 0000:00:1f.3: reg 0x10: [mem 0xfbafe000-0xfbafe0ff 64bit]
[ 0.331686] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.331767] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
[ 0.331785] pci 0000:00:1f.5: reg 0x10: [io 0x9c00-0x9c07]
[ 0.331795] pci 0000:00:1f.5: reg 0x14: [io 0x9880-0x9883]
[ 0.331806] pci 0000:00:1f.5: reg 0x18: [io 0x9800-0x9807]
[ 0.331816] pci 0000:00:1f.5: reg 0x1c: [io 0x9480-0x9483]
[ 0.331827] pci 0000:00:1f.5: reg 0x20: [io 0x9400-0x940f]
[ 0.331837] pci 0000:00:1f.5: reg 0x24: [io 0x9080-0x908f]
[ 0.331966] pci 0000:08:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.331975] pci 0000:08:00.0: reg 0x10: [io 0xd880-0xd887]
[ 0.331982] pci 0000:08:00.0: reg 0x14: [io 0xd800-0xd803]
[ 0.331988] pci 0000:08:00.0: reg 0x18: [io 0xe080-0xe087]
[ 0.331994] pci 0000:08:00.0: reg 0x1c: [io 0xe000-0xe003]
[ 0.332001] pci 0000:08:00.0: reg 0x20: [io 0xdc00-0xdc0f]
[ 0.332007] pci 0000:08:00.0: reg 0x24: [mem 0xfbeef000-0xfbeef7ff]
[ 0.332013] pci 0000:08:00.0: reg 0x30: [mem 0xfbed0000-0xfbedffff pref]
[ 0.332042] pci 0000:08:00.0: PME# supported from D3hot
[ 0.332079] pci 0000:08:00.1: [1b4b:91a4] type 00 class 0x01018f
[ 0.332087] pci 0000:08:00.1: reg 0x10: [io 0xe480-0xe487]
[ 0.332094] pci 0000:08:00.1: reg 0x14: [io 0xe400-0xe403]
[ 0.332100] pci 0000:08:00.1: reg 0x18: [io 0xec00-0xec07]
[ 0.332106] pci 0000:08:00.1: reg 0x1c: [io 0xe880-0xe883]
[ 0.332112] pci 0000:08:00.1: reg 0x20: [io 0xe800-0xe80f]
[ 0.332119] pci 0000:08:00.1: reg 0x24: [mem 0xfbeefc00-0xfbeefc0f]
[ 0.332125] pci 0000:08:00.1: reg 0x30: [mem 0xfbef0000-0xfbefffff pref]
[ 0.332154] pci 0000:08:00.1: PME# supported from D3hot
[ 0.338308] pci 0000:00:01.0: PCI bridge to [bus 08]
[ 0.338313] pci 0000:00:01.0: bridge window [io 0xd000-0xefff]
[ 0.338317] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.338391] pci 0000:07:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.338406] pci 0000:07:00.0: reg 0x10: [mem 0xfbdfe000-0xfbdfffff 64bit]
[ 0.338477] pci 0000:07:00.0: PME# supported from D0 D3hot
[ 0.346311] pci 0000:00:02.0: PCI bridge to [bus 07]
[ 0.346317] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.346384] pci 0000:06:00.0: [1002:5b62] type 00 class 0x030000
[ 0.346393] pci 0000:06:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.346399] pci 0000:06:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.346405] pci 0000:06:00.0: reg 0x18: [mem 0xd8000000-0xd800ffff]
[ 0.346426] pci 0000:06:00.0: reg 0x30: [mem 0xd7fe0000-0xd7ffffff pref]
[ 0.346453] pci 0000:06:00.0: supports D1 D2
[ 0.346484] pci 0000:06:00.1: [1002:5b72] type 00 class 0x038000
[ 0.346492] pci 0000:06:00.1: reg 0x10: [mem 0xdc000000-0xdc00ffff]
[ 0.346543] pci 0000:06:00.1: supports D1 D2
[ 0.346566] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.346572] pci 0000:00:03.0: PCI bridge to [bus 06]
[ 0.346575] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.346578] pci 0000:00:03.0: bridge window [mem 0xd7f00000-0xdfffffff]
[ 0.346581] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.346614] pci 0000:00:07.0: PCI bridge to [bus 05]
[ 0.346652] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.346707] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.347027] pci 0000:02:00.0: [11ab:4380] type 00 class 0x020000
[ 0.347350] pci 0000:02:00.0: reg 0x10: [mem 0xfbcdc000-0xfbcdffff 64bit]
[ 0.347478] pci 0000:02:00.0: reg 0x18: [io 0xb800-0xb8ff]
[ 0.347960] pci 0000:02:00.0: reg 0x30: [mem 0xfbce0000-0xfbcfffff pref]
[ 0.348772] pci 0000:02:00.0: supports D1 D2
[ 0.348774] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.349255] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.349262] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.349269] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.349321] pci 0000:01:00.0: [13f6:0111] type 00 class 0x040100
[ 0.349341] pci 0000:01:00.0: reg 0x10: [io 0xa800-0xa8ff]
[ 0.349418] pci 0000:01:00.0: supports D1 D2
[ 0.349457] pci 0000:01:03.0: [104c:8023] type 00 class 0x0c0010
[ 0.349476] pci 0000:01:03.0: reg 0x10: [mem 0xfbbfb800-0xfbbfbfff]
[ 0.349489] pci 0000:01:03.0: reg 0x14: [mem 0xfbbfc000-0xfbbfffff]
[ 0.349555] pci 0000:01:03.0: supports D1 D2
[ 0.349556] pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.349617] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.349624] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.349631] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.349640] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.349641] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.349642] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.349644] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.349645] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.349646] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.350215] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.350267] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.350321] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.350373] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.350426] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.350477] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.350529] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.350578] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.350653] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.350658] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.350681] Found 1 acpi root devices
[ 0.350739] vgaarb: setting as boot device: PCI:0000:06:00.0
[ 0.350740] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.350742] vgaarb: loaded
[ 0.350742] vgaarb: bridge control possible 0000:06:00.0
[ 0.350851] SCSI subsystem initialized
[ 0.350878] libata version 3.00 loaded.
[ 0.350890] ACPI: bus type USB registered
[ 0.350899] usbcore: registered new interface driver usbfs
[ 0.350905] usbcore: registered new interface driver hub
[ 0.350917] usbcore: registered new device driver usb
[ 0.350989] PCI: Using ACPI for IRQ routing
[ 0.356412] PCI: Discovered peer bus ff
[ 0.356413] PCI: root bus ff: using default resources
[ 0.356413] PCI: Probing PCI hardware (bus ff)
[ 0.356430] PCI host bridge to bus 0000:ff
[ 0.356432] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.356433] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.356435] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.356439] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.356465] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.356491] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.356515] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.356540] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.356563] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.356587] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.356611] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.356634] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.356658] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.356682] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.356705] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.356729] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.356752] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.356779] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.356804] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.356828] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.356851] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.356876] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.356908] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.356911] PCI: pci_cache_line_size set to 64 bytes
[ 0.357035] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.357037] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.357090] NetLabel: Initializing
[ 0.357091] NetLabel: domain hash size = 128
[ 0.357092] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.357102] NetLabel: unlabeled traffic allowed by default
[ 0.357220] hpet clockevent registered
[ 0.357227] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.357235] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.357238] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.360441] Switched to clocksource hpet
[ 0.363771] AppArmor: AppArmor Filesystem Enabled
[ 0.363789] pnp: PnP ACPI init
[ 0.363798] ACPI: bus type PNP registered
[ 0.363843] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
[ 0.363845] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.363847] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.363848] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.363850] system 00:00: [mem 0xfec8a000-0xfec8afff] has been reserved
[ 0.363851] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.363853] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.363882] pnp 00:01: [dma 4]
[ 0.363895] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.363919] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.363959] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.363982] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.364340] system 00:05: [io 0x0a00-0x0adf] has been reserved
[ 0.364342] system 00:05: [io 0x0ae0-0x0aef] has been reserved
[ 0.364344] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.364470] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.364473] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.364474] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.364476] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.364478] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.364479] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.364481] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.364547] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.364595] system 00:08: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.364598] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.364669] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.364671] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.364672] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.364717] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.364719] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.364841] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.364844] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.364845] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.364847] system 00:0b: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.364848] system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.364850] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.364962] pnp: PnP ACPI: found 12 devices
[ 0.364963] ACPI: bus type PNP unregistered
[ 0.371388] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.371390] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.371393] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.371404] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.371419] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.371421] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.371423] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.371424] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.371426] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.371428] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
[ 0.371430] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.371432] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.371434] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.371436] pci 0000:00:01.0: PCI bridge to [bus 08]
[ 0.371438] pci 0000:00:01.0: bridge window [io 0xd000-0xefff]
[ 0.371441] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.371446] pci 0000:00:02.0: PCI bridge to [bus 07]
[ 0.371449] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.371454] pci 0000:00:03.0: PCI bridge to [bus 06]
[ 0.371456] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.371459] pci 0000:00:03.0: bridge window [mem 0xd7f00000-0xdfffffff]
[ 0.371462] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.371465] pci 0000:00:07.0: PCI bridge to [bus 05]
[ 0.371472] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.371479] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.371485] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.371493] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.371500] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.371508] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.371514] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.371522] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.371529] pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.371537] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.371543] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.371547] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.371557] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.371559] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.371560] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.371561] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.371562] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.371564] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.371565] pci_bus 0000:08: resource 0 [io 0xd000-0xefff]
[ 0.371566] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.371568] pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.371569] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.371570] pci_bus 0000:06: resource 1 [mem 0xd7f00000-0xdfffffff]
[ 0.371571] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.371573] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.371574] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd01fffff]
[ 0.371575] pci_bus 0000:03: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.371577] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.371578] pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.371579] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.371580] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.371582] pci_bus 0000:01: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.371583] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.371584] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.371586] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.371587] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.371588] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.371589] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.371592] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.371593] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.371614] NET: Registered protocol family 2
[ 0.371768] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.371903] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.372032] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.372048] TCP: reno registered
[ 0.372056] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.372082] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.372140] NET: Registered protocol family 1
[ 0.373605] pci 0000:06:00.0: Video device with shadowed ROM
[ 0.373660] PCI: CLS 256 bytes, default 64
[ 0.373692] Trying to unpack rootfs image as initramfs...
[ 0.711482] Freeing initrd memory: 26576K (ffff880034c08000 - ffff8800365fc000)
[ 0.711494] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.711496] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.711765] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
[ 0.711774] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
[ 0.711782] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
[ 0.711790] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
[ 0.711798] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
[ 0.711805] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
[ 0.711812] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
[ 0.711819] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
[ 0.711864] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.711866] Scanning for low memory corruption every 60 seconds
[ 0.712126] Initialise system trusted keyring
[ 0.712164] audit: initializing netlink socket (disabled)
[ 0.712173] type=2000 audit(1422559556.572:1): initialized
[ 0.731447] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.732267] zbud: loaded
[ 0.732387] VFS: Disk quotas dquot_6.5.2
[ 0.732436] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.732768] fuse init (API version 7.22)
[ 0.732827] msgmni has been set to 15946
[ 0.732865] Key type big_key registered
[ 0.733417] Key type asymmetric registered
[ 0.733418] Asymmetric key parser 'x509' registered
[ 0.733439] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.733481] io scheduler noop registered
[ 0.733482] io scheduler deadline registered (default)
[ 0.733499] io scheduler cfq registered
[ 0.733595] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.733655] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
[ 0.733712] pcieport 0000:00:03.0: irq 42 for MSI/MSI-X
[ 0.733769] pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
[ 0.733825] pcieport 0000:00:09.0: irq 44 for MSI/MSI-X
[ 0.733872] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.734011] pcieport 0000:00:1c.0: irq 45 for MSI/MSI-X
[ 0.734175] pcieport 0000:00:1c.4: irq 46 for MSI/MSI-X
[ 0.734259] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 0.734278] aer 0000:00:02.0:pcie02: service driver aer loaded
[ 0.734296] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 0.734314] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 0.734333] aer 0000:00:09.0:pcie02: service driver aer loaded
[ 0.734342] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.734343] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 0.734344] pci 0000:08:00.1: Signaling PME through PCIe PME interrupt
[ 0.734347] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.734352] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 0.734354] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 0.734356] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 0.734362] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 0.734363] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.734364] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 0.734367] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 0.734372] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.734375] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.734380] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 0.734383] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 0.734403] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.734410] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.734426] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.734428] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.734435] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.734443] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.734478] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 3a40 ss_vid 174b ss_did 1000
[ 0.734507] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.734519] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3a48 ss_vid 174b ss_did 1000
[ 0.734542] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[ 0.734545] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.734576] intel_idle: MWAIT substates: 0x1120
[ 0.734589] intel_idle: v0.4 model 0x1A
[ 0.734590] intel_idle: lapic_timer_reliable_states 0x2
[ 0.734763] ipmi message handler version 39.2
[ 0.734808] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.734811] ACPI: Power Button [PWRB]
[ 0.734832] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.734834] ACPI: Power Button [PWRF]
[ 0.735209] ACPI: Invalid active0 threshold
[ 0.735414] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.735415] ACPI: Thermal Zone [THRM] (22 C)
[ 0.735430] GHES: HEST is not enabled!
[ 0.735483] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.736635] Linux agpgart interface v0.103
[ 0.737653] brd: module loaded
[ 0.738178] loop: module loaded
[ 0.738258] ata_piix 0000:00:1f.2: version 2.13
[ 0.738344] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.739086] scsi0 : ata_piix
[ 0.739154] scsi1 : ata_piix
[ 0.739179] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 0.739187] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 0.739278] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.739909] scsi2 : ata_piix
[ 0.740009] scsi3 : ata_piix
[ 0.740033] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19
[ 0.740039] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19
[ 0.740211] libphy: Fixed MDIO Bus: probed
[ 0.740264] tun: Universal TUN/TAP device driver, 1.6
[ 0.740265] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.740303] PPP generic driver version 2.4.2
[ 0.740335] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.740338] ehci-pci: EHCI PCI platform driver
[ 0.740476] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.740481] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.740494] ehci-pci 0000:00:1a.7: debug port 1
[ 0.744419] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
[ 0.744433] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbaf6000
[ 0.756436] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.756478] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.756480] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.756481] usb usb1: Product: EHCI Host Controller
[ 0.756483] usb usb1: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[ 0.756484] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.756564] hub 1-0:1.0: USB hub found
[ 0.756569] hub 1-0:1.0: 6 ports detected
[ 0.756774] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.756778] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.756793] ehci-pci 0000:00:1d.7: debug port 1
[ 0.760708] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
[ 0.760724] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbafc000
[ 0.772424] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.772466] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.772468] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.772469] usb usb2: Product: EHCI Host Controller
[ 0.772470] usb usb2: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[ 0.772471] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.772664] hub 2-0:1.0: USB hub found
[ 0.772670] hub 2-0:1.0: 6 ports detected
[ 0.772781] ehci-platform: EHCI generic platform driver
[ 0.772786] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.772787] ohci-pci: OHCI PCI platform driver
[ 0.772793] ohci-platform: OHCI generic platform driver
[ 0.772797] uhci_hcd: USB Universal Host Controller Interface driver, overcurrent ignored
[ 0.772897] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.772901] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.772939] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008080
[ 0.772971] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.772973] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.772974] usb usb3: Product: UHCI Host Controller
[ 0.772975] usb usb3: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.772977] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.773155] hub 3-0:1.0: USB hub found
[ 0.773161] hub 3-0:1.0: 2 ports detected
[ 0.773310] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.773314] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.773354] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008400
[ 0.773386] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.773387] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.773388] usb usb4: Product: UHCI Host Controller
[ 0.773390] usb usb4: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.773391] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.773570] hub 4-0:1.0: USB hub found
[ 0.773576] hub 4-0:1.0: 2 ports detected
[ 0.773726] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.773730] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.773757] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008480
[ 0.773790] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.773792] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.773793] usb usb5: Product: UHCI Host Controller
[ 0.773794] usb usb5: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.773795] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.773977] hub 5-0:1.0: USB hub found
[ 0.773983] hub 5-0:1.0: 2 ports detected
[ 0.774129] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.774133] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.774161] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008800
[ 0.774194] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.774195] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.774197] usb usb6: Product: UHCI Host Controller
[ 0.774198] usb usb6: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.774199] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.774377] hub 6-0:1.0: USB hub found
[ 0.774383] hub 6-0:1.0: 2 ports detected
[ 0.774534] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.774537] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.774565] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008880
[ 0.774596] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.774598] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.774599] usb usb7: Product: UHCI Host Controller
[ 0.774601] usb usb7: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.774602] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.774782] hub 7-0:1.0: USB hub found
[ 0.774789] hub 7-0:1.0: 2 ports detected
[ 0.774934] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.774937] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.774965] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008c00
[ 0.774997] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.774998] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.774999] usb usb8: Product: UHCI Host Controller
[ 0.775001] usb usb8: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.775002] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.775156] hub 8-0:1.0: USB hub found
[ 0.775161] hub 8-0:1.0: 2 ports detected
[ 0.775262] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.775266] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 9
[ 0.775384] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X
[ 0.775389] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X
[ 0.775393] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X
[ 0.775399] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X
[ 0.775404] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X
[ 0.775408] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X
[ 0.775412] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X
[ 0.775416] xhci_hcd 0000:07:00.0: irq 54 for MSI/MSI-X
[ 0.775508] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.775509] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.775511] usb usb9: Product: xHCI Host Controller
[ 0.775512] usb usb9: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[ 0.775513] usb usb9: SerialNumber: 0000:07:00.0
[ 0.775648] hub 9-0:1.0: USB hub found
[ 0.775656] hub 9-0:1.0: 2 ports detected
[ 0.775707] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.775710] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
[ 0.778756] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.778757] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.778759] usb usb10: Product: xHCI Host Controller
[ 0.778760] usb usb10: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[ 0.778761] usb usb10: SerialNumber: 0000:07:00.0
[ 0.778835] hub 10-0:1.0: USB hub found
[ 0.778844] hub 10-0:1.0: 2 ports detected
[ 0.784556] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.784977] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.784981] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.785228] mousedev: PS/2 mouse device common for all mice
[ 0.785568] rtc_cmos 00:02: RTC can wake from S4
[ 0.785736] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.785772] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.785813] device-mapper: uevent: version 1.0.3
[ 0.785897] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.785902] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.785973] TCP: cubic registered
[ 0.786032] NET: Registered protocol family 10
[ 0.786156] NET: Registered protocol family 17
[ 0.786161] Key type dns_resolver registered
[ 0.786461] Loading compiled-in X.509 certificates
[ 0.787212] Loaded X.509 cert 'Magrathea: Glacier signing key: 55ab2fe28ed5c60df9587150d1734c920ea7b818'
[ 0.787219] registered taskstats version 1
[ 0.789651] Key type trusted registered
[ 0.791689] Key type encrypted registered
[ 0.794157] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.794161] IMA: No TPM chip found, activating TPM-bypass!
[ 0.794788] regulator-dummy: disabling
[ 0.795105] Magic number: 15:538:446
[ 0.795130] pci 0000:ff:05.0: hash matches
[ 0.795290] rtc_cmos 00:02: setting system clock to 2015-01-29 19:25:57 UTC (1422559557)
[ 0.797564] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.797566] EDD information not available.
[ 0.797583] PM: Hibernation image not present or could not be loaded.
[ 1.071104] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.085707] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.391105] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 1.391122] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.544557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.544573] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.544587] ata2.01: link offline, clearing class 3 to NONE
[ 1.552695] ata2.00: ATAPI: ASUS DRW-24F1ST a, 1.00, max UDMA/100
[ 1.568646] ata2.00: configured for UDMA/100
[ 1.570233] scsi 1:0:0:0: CD-ROM ASUS DRW-24F1ST a 1.00 PQ: 0 ANSI: 5
[ 1.572857] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.572859] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.572997] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.573109] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.574839] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.574841] Write protecting the kernel read-only data: 12288k
[ 1.577131] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[ 1.578562] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 1.588518] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 1.601504] systemd-udevd[181]: starting version 204
[ 1.613921] scsi4 : pata_marvell
[ 1.613989] scsi5 : pata_marvell
[ 1.614021] ata5: PATA max UDMA/100 cmd 0xe480 ctl 0xe400 bmdma 0xe800 irq 17
[ 1.614023] ata6: PATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe808 irq 17
[ 1.615331] ahci 0000:08:00.0: version 3.0
[ 1.615395] ahci 0000:08:00.0: irq 55 for MSI/MSI-X
[ 1.615406] ahci 0000:08:00.0: controller can do FBS, turning on CAP_FBS
[ 1.616428] sky2: driver version 1.30
[ 1.616704] sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
[ 1.617246] sky2 0000:02:00.0: irq 56 for MSI/MSI-X
[ 1.618373] sky2 0000:02:00.0 eth0: addr dc:9c:52:00:04:9d
[ 1.622055] [drm] Initialized drm 1.1.0 20060810
[ 1.628423] ahci 0000:08:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.628426] ahci 0000:08:00.0: flags: 64bit ncq fbs pio
[ 1.629195] scsi6 : ahci
[ 1.629809] scsi7 : ahci
[ 1.629920] scsi8 : ahci
[ 1.630001] scsi9 : ahci
[ 1.630192] scsi10 : ahci
[ 1.630277] scsi11 : ahci
[ 1.630514] scsi12 : ahci
[ 1.630583] scsi13 : ahci
[ 1.630627] ata7: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef100 irq 55
[ 1.630634] ata8: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef180 irq 55
[ 1.630636] ata9: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef200 irq 55
[ 1.630638] ata10: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef280 irq 55
[ 1.630640] ata11: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef300 irq 55
[ 1.630646] ata12: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef380 irq 55
[ 1.630648] ata13: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef400 irq 55
[ 1.630650] ata14: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef480 irq 55
[ 1.650221] [drm] radeon kernel modesetting enabled.
[ 1.650683] [drm] initializing kernel modesetting (RV380 0x1002:0x5B62 0x174B:0x0490).
[ 1.650704] [drm] register mmio base: 0xD8000000
[ 1.650706] [drm] register mmio size: 65536
[ 1.650779] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.650785] radeon 0000:06:00.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 1.650788] radeon 0000:06:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 1.650795] [drm] Detected VRAM RAM=256M, BAR=256M
[ 1.650799] [drm] RAM width 128bits DDR
[ 1.650921] [TTM] Zone kernel: Available graphics memory: 4083616 kiB
[ 1.650926] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.650927] [TTM] Initializing pool allocator
[ 1.650930] [TTM] Initializing DMA pool allocator
[ 1.650940] [drm] radeon: 256M of VRAM memory ready
[ 1.650941] [drm] radeon: 512M of GTT memory ready.
[ 1.650951] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.651325] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 1.651827] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 1.651841] radeon 0000:06:00.0: WB enabled
[ 1.651842] radeon 0000:06:00.0: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0xffff880035ba8000
[ 1.651844] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.651844] [drm] Driver supports precise vblank timestamp query.
[ 1.651858] radeon 0000:06:00.0: irq 57 for MSI/MSI-X
[ 1.651865] radeon 0000:06:00.0: radeon: using MSI.
[ 1.651880] [drm] radeon: irq initialized.
[ 1.651884] [drm] Loading R300 Microcode
[ 1.652128] [drm] radeon: ring at 0x00000000A0001000
[ 1.652147] [drm] ring test succeeded in 1 usecs
[ 1.652349] [drm] ib test succeeded in 0 usecs
[ 1.652506] [drm] Radeon Display Connectors
[ 1.652507] [drm] Connector 0:
[ 1.652508] [drm] VGA-1
[ 1.652509] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 1.652510] [drm] Encoders:
[ 1.652511] [drm] CRT1: INTERNAL_DAC1
[ 1.652512] [drm] Connector 1:
[ 1.652512] [drm] DVI-I-1
[ 1.652513] [drm] HPD1
[ 1.652514] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 1.652515] [drm] Encoders:
[ 1.652515] [drm] CRT2: INTERNAL_DAC2
[ 1.652516] [drm] DFP1: INTERNAL_TMDS1
[ 1.652517] [drm] Connector 2:
[ 1.652517] [drm] SVIDEO-1
[ 1.652518] [drm] Encoders:
[ 1.652519] [drm] TV1: INTERNAL_DAC2
[ 1.680477] firewire_ohci 0000:01:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.709421] [drm] fb mappable at 0xC00C0000
[ 1.709422] [drm] vram apper at 0xC0000000
[ 1.709423] [drm] size 5242880
[ 1.709424] [drm] fb depth is 24
[ 1.709424] [drm] pitch is 5120
[ 1.709596] fbcon: radeondrmfb (fb0) is primary device
[ 1.742558] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[ 1.742559] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.742560] usb 2-3: Product: 802.11 n WLAN
[ 1.742561] usb 2-3: Manufacturer: Ralink
[ 1.742561] usb 2-3: SerialNumber: 1.0
[ 1.759839] tsc: Refined TSC clocksource calibration: 3219.929 MHz
[ 1.764338] Console: switching to colour frame buffer device 160x64
[ 1.768748] radeon 0000:06:00.0: fb0: radeondrmfb frame buffer device
[ 1.768749] radeon 0000:06:00.0: registered panic notifier
[ 1.768752] [drm] Initialized radeon 2.36.0 20080528 for 0000:06:00.0 on minor 0
[ 1.956498] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.956544] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.956584] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.956605] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.956630] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.956655] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.956670] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.956684] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.956707] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.956930] ata14.00: configured for UDMA/66
[ 1.957770] ata7.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[ 1.957774] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.958749] ata7.00: configured for UDMA/133
[ 1.959150] scsi 6:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[ 1.959351] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 1.959454] sd 6:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.959456] sd 6:0:0:0: [sda] 4096-byte physical blocks
[ 1.959884] sd 6:0:0:0: [sda] Write Protect is off
[ 1.959889] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.960145] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.964808] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.965073] scsi 13:0:0:0: Attached scsi generic sg2 type 3
[ 2.035404] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.037790] sd 6:0:0:0: [sda] Attached SCSI disk
[ 2.180600] firewire_core 0000:01:03.0: created device fw0: GUID f698f698fbbf5e21, S400
[ 2.240438] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.408998] usb 3-2: New USB device found, idVendor=1631, idProduct=a510
[ 2.409002] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.409005] usb 3-2: Product: USB HUB Keyboard
[ 2.409008] usb 3-2: Manufacturer: Chicony
[ 2.411003] hub 3-2:1.0: USB hub found
[ 2.412948] hub 3-2:1.0: 5 ports detected
[ 2.413951] hub 3-2:1.0: insufficient power available to use all downstream ports
[ 2.656536] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 2.756620] Switched to clocksource tsc
[ 2.809149] usb 6-2: New USB device found, idVendor=0cf3, idProduct=3005
[ 2.809153] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.056486] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 3.237220] random: nonblocking pool is initialized
[ 3.521818] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.721102] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.875762] systemd-udevd[404]: starting version 204
[ 8.087833] lp: driver loaded but no devices found
[ 8.326512] snd_hda_intel 0000:00:1b.0: irq 58 for MSI/MSI-X
[ 8.337185] SKU: Nid=0x1d sku_cfg=0x4005e601
[ 8.337187] SKU: port_connectivity=0x1
[ 8.337187] SKU: enable_pcbeep=0x0
[ 8.337188] SKU: check_sum=0x00000005
[ 8.337189] SKU: customization=0x000000e6
[ 8.337189] SKU: external_amp=0x0
[ 8.337190] SKU: platform_type=0x0
[ 8.337191] SKU: swap=0x0
[ 8.337191] SKU: override=0x1
[ 8.337682] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 8.337683] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.337684] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.337685] mono: mono_out=0x0
[ 8.337686] dig-out=0x1e/0x0
[ 8.337686] inputs:
[ 8.337687] Front Mic=0x19
[ 8.337688] Rear Mic=0x18
[ 8.337689] Line=0x1a
[ 8.337689] dig-in=0x1f
[ 8.337690] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 8.337691] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
[ 8.348810] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.348854] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.348890] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.348926] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.348959] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.348993] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 8.349025] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 8.368190] ppdev: user-space parallel port driver
[ 8.607401] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 8.895418] kvm: disabled by bios
[ 8.947870] EDAC MC: Ver: 3.0.0
[ 8.999937] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 8.999977] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 9.000080] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 9.003950] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 9.003955] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.003985] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.005296] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 9.142752] Bluetooth: Core ver 2.17
[ 9.142769] NET: Registered protocol family 31
[ 9.142770] Bluetooth: HCI device and connection manager initialized
[ 9.142775] Bluetooth: HCI socket layer initialized
[ 9.142777] Bluetooth: L2CAP socket layer initialized
[ 9.142779] Bluetooth: SCO socket layer initialized
[ 9.198688] usbcore: registered new interface driver btusb
[ 9.254641] type=1400 audit(1422559565.955:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=610 comm="apparmor_parser"
[ 9.254646] type=1400 audit(1422559565.955:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=610 comm="apparmor_parser"
[ 9.254649] type=1400 audit(1422559565.955:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=610 comm="apparmor_parser"
[ 9.254655] type=1400 audit(1422559565.955:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=611 comm="apparmor_parser"
[ 9.254660] type=1400 audit(1422559565.955:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=611 comm="apparmor_parser"
[ 9.254663] type=1400 audit(1422559565.955:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=611 comm="apparmor_parser"
[ 9.254973] type=1400 audit(1422559565.955:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=610 comm="apparmor_parser"
[ 9.254977] type=1400 audit(1422559565.955:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=610 comm="apparmor_parser"
[ 9.254986] type=1400 audit(1422559565.955:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=611 comm="apparmor_parser"
[ 9.254990] type=1400 audit(1422559565.955:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=611 comm="apparmor_parser"
[ 9.666724] cfg80211: Calling CRDA to update world regulatory domain
[ 9.777206] cfg80211: World regulatory domain updated:
[ 9.777209] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.777210] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.777211] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.777212] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.777213] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.777214] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.485317] init: failsafe main process (791) killed by TERM signal
[ 14.263784] audit_printk_skb: 132 callbacks suppressed
[ 14.263788] type=1400 audit(1422559570.967:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=931 comm="apparmor_parser"
[ 14.263796] type=1400 audit(1422559570.967:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=931 comm="apparmor_parser"
[ 14.279844] type=1400 audit(1422559570.983:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=931 comm="apparmor_parser"
[ 14.281157] type=1400 audit(1422559570.983:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=931 comm="apparmor_parser"
[ 14.281161] type=1400 audit(1422559570.983:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=931 comm="apparmor_parser"
[ 14.287844] type=1400 audit(1422559570.991:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=931 comm="apparmor_parser"
[ 14.288355] type=1400 audit(1422559570.991:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=931 comm="apparmor_parser"
[ 14.295775] type=1400 audit(1422559570.999:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=931 comm="apparmor_parser"
[ 14.296447] type=1400 audit(1422559570.999:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=931 comm="apparmor_parser"
[ 14.862047] type=1400 audit(1422559571.563:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1098 comm="apparmor_parser"
[ 18.171474] usb 8-2: device descriptor read/64, error -110
[ 18.215861] init: gdm main process (1258) killed by TERM signal
[ 18.535021] Bluetooth: RFCOMM TTY layer initialized
[ 18.535030] Bluetooth: RFCOMM socket layer initialized
[ 18.535033] Bluetooth: RFCOMM ver 1.11
[ 18.826087] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.826090] Bluetooth: BNEP filters: protocol multicast
[ 18.826095] Bluetooth: BNEP socket layer initialized
[ 18.918046] init: cups main process (1143) killed by HUP signal
[ 18.918054] init: cups main process ended, respawning
[ 21.245058] init: samba-ad-dc main process (1199) terminated with status 1
[ 22.750224] sky2 0000:02:00.0 eth0: enabling interface
[ 22.750956] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.754375] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.779240] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 24.781724] vboxdrv: Found 8 processor cores.
[ 24.781907] vboxdrv: fAsync=0 offMin=0x1e3 offMax=0x2e35
[ 24.781972] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 24.781974] vboxdrv: Successfully loaded version 4.3.20 (interface 0x001a0008).
[ 24.999995] vboxpci: IOMMU not found (not registered)
[ 25.790178] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 25.790203] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.640107] init: plymouth-upstart-bridge main process ended, respawning
[ 31.644061] init: plymouth-upstart-bridge main process (1887) terminated with status 1
[ 31.644069] init: plymouth-upstart-bridge main process ended, respawning
[ 33.386572] usb 8-2: device descriptor read/64, error -110
[ 33.602549] usb 8-2: new full-speed USB device number 3 using uhci_hcd
[ 45.136131] audit_printk_skb: 12 callbacks suppressed
[ 45.136133] type=1400 audit(1422559601.843:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2285 comm="apparmor_parser"
[ 45.136138] type=1400 audit(1422559601.843:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2285 comm="apparmor_parser"
[ 45.136454] type=1400 audit(1422559601.843:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2285 comm="apparmor_parser"
[ 48.708419] usb 8-2: device descriptor read/64, error -110
[ 63.915961] usb 8-2: device descriptor read/64, error -110
[ 64.131788] usb 8-2: new full-speed USB device number 4 using uhci_hcd
[ 74.533877] usb 8-2: device not accepting address 4, error -110
[ 74.645967] usb 8-2: new full-speed USB device number 5 using uhci_hcd
[ 85.047996] usb 8-2: device not accepting address 5, error -110
[ 85.048076] hub 8-0:1.0: unable to enumerate USB device on port 2
[ 85.160004] usb 2-3: reset high-speed USB device number 3 using ehci-pci
[ 85.302781] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 85.331642] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 85.332004] ieee80211 phy0: Failed to initialize wep: -2
[ 85.332012] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 85.332273] usbcore: registered new interface driver rt2800usb
[ 85.375903] systemd-udevd[2498]: renamed network interface wlan0 to wlan1
[ 85.379396] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 85.417030] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 85.529573] usb 3-2.1: new low-speed USB device number 3 using uhci_hcd
[ 85.657418] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 85.658579] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 85.704610] usb 3-2.1: New USB device found, idVendor=1631, idProduct=0006
[ 85.704614] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 85.704615] usb 3-2.1: Product: IR Receiver
[ 85.704617] usb 3-2.1: Manufacturer: Chicony
[ 85.801611] usb 3-2.2: new low-speed USB device number 4 using uhci_hcd
[ 85.955590] usb 3-2.2: New USB device found, idVendor=045e, idProduct=0084
[ 85.955593] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 85.955595] usb 3-2.2: Product: Basic Optical Mouse
[ 85.955596] usb 3-2.2: Manufacturer: Microsoft
[ 86.048593] usb 3-2.3: new full-speed USB device number 5 using uhci_hcd
[ 86.188592] usb 3-2.3: New USB device found, idVendor=08ff, idProduct=2580
[ 86.188595] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 86.188597] usb 3-2.3: Product: Fingerprint Sensor
[ 86.280534] usb 3-2.5: new full-speed USB device number 6 using uhci_hcd
[ 86.432562] usb 3-2.5: New USB device found, idVendor=1631, idProduct=0510
[ 86.432565] usb 3-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 86.432567] usb 3-2.5: Product: USB HUB Keyboard
[ 86.432568] usb 3-2.5: Manufacturer: Chicony
[ 86.491426] hidraw: raw HID events driver (C) Jiri Kosina
[ 86.575682] usbcore: registered new interface driver usbhid
[ 86.575685] usbhid: USB HID core driver
[ 86.615611] input: Chicony IR Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input12
[ 86.615803] hid-generic 0003:1631:0006.0001: input,hiddev0,hidraw0: USB HID v1.10 Keyboard [Chicony IR Receiver] on usb-0000:00:1a.0-2.1/input0
[ 86.615904] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input13
[ 86.617715] hid-generic 0003:045E:0084.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-2.2/input0
[ 86.617857] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.5/3-2.5:1.0/input/input14
[ 86.618014] hid-generic 0003:1631:0510.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony USB HUB Keyboard ] on usb-0000:00:1a.0-2.5/input0
[ 86.622586] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.5/3-2.5:1.1/input/input15
[ 86.622686] hid-generic 0003:1631:0510.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Chicony USB HUB Keyboard ] on usb-0000:00:1a.0-2.5/input1
[ 105.802244] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 105.843277] ISOFS: changing to secondary rootSaphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#35 Le 29/01/2015, à 20:59
- nany
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bon alors, essayons ça :
sudo sed -i 's/uhci-hcd.ignore_oc=yes/usbcore.old_scheme_first=1/' /etc/default/grub
sudo update-grubPuis redémarre et redonne un dmesg.
Hors ligne
#36 Le 29/01/2015, à 21:39
- nam1962
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Je passe un bref instant sur le fil.
Pas vu les résultats de :
cat /etc/apt/sources.list(Genre y'a t'il du proposed qui traîne ?)
de :
cat /etc/apt/sources.list.d/* [édité]
(genre y'a t'il de l'exotique ?)
Ne sais pas si les firmware-nonfree sont installés (genre y a t'il un machin qui ne trouve pas le bonne définition d'un bidule)
Ni si la swappiness est bien réglée (sur le dernier point je ne suis pas sûr de moi : euhh, ça fait du bien, mais avant ou après le démarrage)
Toutes mes confuses si j'ai lu trop vite et que mes questions s'avèrent résolues ou bébêtes: !
Dernière modification par nam1962 (Le 30/01/2015, à 10:04)
[ Modéré ]
Hors ligne
#37 Le 29/01/2015, à 21:48
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
voici le nouveau dmesg :
[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-43-generic (buildd@tipua) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #72-Ubuntu SMP Mon Dec 8 19:35:06 UTC 2014 (Ubuntu 3.13.0-43.72-generic 3.13.11.11)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic root=UUID=5ccb7f75-6b15-4dd9-bee2-c9334c1f650d ro splash quiet usbcore.old_scheme_first=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf78dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf78e000-0x00000000bf7cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ec000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: /PURE BLACK X58, BIOS 080016 09/28/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-E7FFF write-through
[ 0.000000] E8000-EBFFF write-protect
[ 0.000000] EC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 8184M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 1GB, type WB
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34c08000-0x365fbfff]
[ 0.000000] ACPI: RSDP 00000000000fa140 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 000054 (v01 092811 XSDT1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v04 092811 FACP1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf780480 005D0F (v02 1AEGH 1AEGHA52 00000A52 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf78e000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000AC (v02 092811 APIC1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780440 00003C (v01 092811 OEMMCFG 20110928 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf78e040 000082 (v01 092811 OEMB1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf78e0d0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf790ce0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
[ 0.000000] NODE_DATA [mem 0x23fff6000-0x23fffafff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x23fffffff]
[ 0.000000] On node 0 totalpages: 2094876
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12190 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 20480 pages used for memmap
[ 0.000000] Normal zone: 1310720 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 12 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf78dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf78e000-0xbf7cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7d0000-0xbf7dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7e0000-0xbf7ebfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7ec000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s82304 r8192 d24192 u131072
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062121
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic root=UUID=5ccb7f75-6b15-4dd9-bee2-c9334c1f650d ro splash quiet usbcore.old_scheme_first=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8137804K/8379504K available (7383K kernel code, 1144K rwdata, 3408K rodata, 1336K init, 1444K bss, 241700K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-11.
[ 0.000000] NR_IRQS:16640 nr_irqs:776 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.004000] tsc: Fast TSC calibration using PIT
[ 0.008000] tsc: Detected 3219.780 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6439.56 BogoMIPS (lpj=12879120)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000031] Security Framework initialized
[ 0.000049] AppArmor: AppArmor initialized
[ 0.000050] Yama: becoming mindful.
[ 0.000585] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002045] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002665] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002675] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002869] Initializing cgroup subsys memory
[ 0.002874] Initializing cgroup subsys devices
[ 0.002876] Initializing cgroup subsys freezer
[ 0.002877] Initializing cgroup subsys blkio
[ 0.002879] Initializing cgroup subsys perf_event
[ 0.002881] Initializing cgroup subsys hugetlb
[ 0.002898] CPU: Physical Processor ID: 0
[ 0.002899] CPU: Processor Core ID: 0
[ 0.002903] mce: CPU supports 9 MCE banks
[ 0.002914] CPU0: Thermal monitoring enabled (TM1)
[ 0.002924] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.002924] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002924] tlb_flushall_shift: 6
[ 0.003011] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.004071] ACPI: Core revision 20131115
[ 0.006542] ACPI: All ACPI Tables successfully acquired
[ 0.028822] ftrace: allocating 28552 entries in 112 pages
[ 0.040463] dmar: Host address width 39
[ 0.040465] dmar: DRHD base: 0x000000fbfff000 flags: 0x0
[ 0.040472] dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f020fa
[ 0.040473] dmar: DRHD base: 0x000000fbffe000 flags: 0x1
[ 0.040479] dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c9078010ef0462 ecap f020fe
[ 0.040480] dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
[ 0.040482] dmar: RMRR base: 0x000000bf7ec000 end: 0x000000bf7fffff
[ 0.040483] dmar: ATSR flags: 0x0
[ 0.040550] This system BIOS has enabled interrupt remapping
[ 0.040550] on a chipset that contains an erratum making that
[ 0.040550] feature unstable. To maintain system stability
[ 0.040550] interrupt remapping is being disabled. Please
[ 0.040550] contact your BIOS vendor for an update
[ 0.040585] Switched APIC routing to physical flat.
[ 0.040999] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080678] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz (fam: 06, model: 1a, stepping: 05)
[ 0.186297] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.186302] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.186303] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.186305] ... version: 3
[ 0.186306] ... bit width: 48
[ 0.186307] ... generic registers: 4
[ 0.186308] ... value mask: 0000ffffffffffff
[ 0.186309] ... max period: 000000007fffffff
[ 0.186310] ... fixed-purpose events: 3
[ 0.186311] ... event mask: 000000070000000f
[ 0.187847] x86: Booting SMP configuration:
[ 0.198387] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.201090] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.233804] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.246517] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.187849] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.302035] x86: Booted up 1 node, 8 CPUs
[ 0.302038] smpboot: Total of 8 processors activated (51516.48 BogoMIPS)
[ 0.306297] devtmpfs: initialized
[ 0.308255] EVM: security.selinux
[ 0.308256] EVM: security.SMACK64
[ 0.308257] EVM: security.ima
[ 0.308258] EVM: security.capability
[ 0.308291] PM: Registering ACPI NVS region [mem 0xbf78e000-0xbf7cffff] (270336 bytes)
[ 0.308998] pinctrl core: initialized pinctrl subsystem
[ 0.309043] regulator-dummy: no parameters
[ 0.309071] RTC time: 20:38:02, date: 01/29/15
[ 0.309097] NET: Registered protocol family 16
[ 0.309176] cpuidle: using governor ladder
[ 0.309177] cpuidle: using governor menu
[ 0.309206] ACPI: bus type PCI registered
[ 0.309207] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.309257] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.309259] PCI: not using MMCONFIG
[ 0.309260] PCI: Using configuration type 1 for base access
[ 0.309984] bio: create slab <bio-0> at 0
[ 0.310101] ACPI: Added _OSI(Module Device)
[ 0.310102] ACPI: Added _OSI(Processor Device)
[ 0.310103] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.310104] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.311393] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.314374] ACPI: SSDT 00000000bf78e210 00244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.314583] ACPI: Dynamic OEM Table Load:
[ 0.314585] ACPI: SSDT (null) 00244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.314649] ACPI: SSDT 00000000bf790660 000678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.314805] ACPI: Dynamic OEM Table Load:
[ 0.314807] ACPI: SSDT (null) 000678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.315049] ACPI: Interpreter enabled
[ 0.315054] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.315064] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.315065] ACPI: Using IOAPIC for interrupt routing
[ 0.315082] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.315913] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.326863] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.326934] ACPI: No dock devices found.
[ 0.331871] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.331875] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.332048] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.332385] PCI host bridge to bus 0000:00
[ 0.332387] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.332388] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.332390] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.332391] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.332392] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.332394] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.332395] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.332405] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.332450] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.332511] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.332559] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.332598] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.332622] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.332670] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.332707] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.332730] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.332778] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.332816] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.332844] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.332888] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.332926] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.332954] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[ 0.332998] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.333037] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.333066] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.333151] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.333235] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.333315] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.333408] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.333449] pci 0000:00:1a.0: reg 0x20: [io 0x8080-0x809f]
[ 0.333536] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.333566] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.333607] pci 0000:00:1a.1: reg 0x20: [io 0x8400-0x841f]
[ 0.333693] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.333725] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.333766] pci 0000:00:1a.2: reg 0x20: [io 0x8480-0x849f]
[ 0.333851] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.333890] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.333912] pci 0000:00:1a.7: reg 0x10: [mem 0xfbaf6000-0xfbaf63ff]
[ 0.334000] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.334044] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.334079] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.334096] pci 0000:00:1b.0: reg 0x10: [mem 0xfbaf8000-0xfbafbfff 64bit]
[ 0.334159] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.334228] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.334299] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.334345] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.334378] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.334447] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.334492] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.334525] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.334566] pci 0000:00:1d.0: reg 0x20: [io 0x8800-0x881f]
[ 0.334652] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.334680] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.334722] pci 0000:00:1d.1: reg 0x20: [io 0x8880-0x889f]
[ 0.334808] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.334835] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.334876] pci 0000:00:1d.2: reg 0x20: [io 0x8c00-0x8c1f]
[ 0.334958] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.334998] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.335021] pci 0000:00:1d.7: reg 0x10: [mem 0xfbafc000-0xfbafc3ff]
[ 0.335109] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.335149] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.335177] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.335254] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.335282] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.335366] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.335375] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.335382] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.335389] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.335479] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a
[ 0.335497] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.335507] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.335518] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.335528] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.335539] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f]
[ 0.335549] pci 0000:00:1f.2: reg 0x24: [io 0xffa0-0xffaf]
[ 0.335639] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.335656] pci 0000:00:1f.3: reg 0x10: [mem 0xfbafe000-0xfbafe0ff 64bit]
[ 0.335677] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.335758] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
[ 0.335776] pci 0000:00:1f.5: reg 0x10: [io 0x9c00-0x9c07]
[ 0.335786] pci 0000:00:1f.5: reg 0x14: [io 0x9880-0x9883]
[ 0.335797] pci 0000:00:1f.5: reg 0x18: [io 0x9800-0x9807]
[ 0.335807] pci 0000:00:1f.5: reg 0x1c: [io 0x9480-0x9483]
[ 0.335818] pci 0000:00:1f.5: reg 0x20: [io 0x9400-0x940f]
[ 0.335828] pci 0000:00:1f.5: reg 0x24: [io 0x9080-0x908f]
[ 0.335956] pci 0000:08:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.335966] pci 0000:08:00.0: reg 0x10: [io 0xd880-0xd887]
[ 0.335972] pci 0000:08:00.0: reg 0x14: [io 0xd800-0xd803]
[ 0.335978] pci 0000:08:00.0: reg 0x18: [io 0xe080-0xe087]
[ 0.335984] pci 0000:08:00.0: reg 0x1c: [io 0xe000-0xe003]
[ 0.335991] pci 0000:08:00.0: reg 0x20: [io 0xdc00-0xdc0f]
[ 0.335997] pci 0000:08:00.0: reg 0x24: [mem 0xfbeef000-0xfbeef7ff]
[ 0.336004] pci 0000:08:00.0: reg 0x30: [mem 0xfbed0000-0xfbedffff pref]
[ 0.336032] pci 0000:08:00.0: PME# supported from D3hot
[ 0.336069] pci 0000:08:00.1: [1b4b:91a4] type 00 class 0x01018f
[ 0.336077] pci 0000:08:00.1: reg 0x10: [io 0xe480-0xe487]
[ 0.336084] pci 0000:08:00.1: reg 0x14: [io 0xe400-0xe403]
[ 0.336090] pci 0000:08:00.1: reg 0x18: [io 0xec00-0xec07]
[ 0.336096] pci 0000:08:00.1: reg 0x1c: [io 0xe880-0xe883]
[ 0.336103] pci 0000:08:00.1: reg 0x20: [io 0xe800-0xe80f]
[ 0.336109] pci 0000:08:00.1: reg 0x24: [mem 0xfbeefc00-0xfbeefc0f]
[ 0.336115] pci 0000:08:00.1: reg 0x30: [mem 0xfbef0000-0xfbefffff pref]
[ 0.336144] pci 0000:08:00.1: PME# supported from D3hot
[ 0.342305] pci 0000:00:01.0: PCI bridge to [bus 08]
[ 0.342309] pci 0000:00:01.0: bridge window [io 0xd000-0xefff]
[ 0.342313] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.342388] pci 0000:07:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.342403] pci 0000:07:00.0: reg 0x10: [mem 0xfbdfe000-0xfbdfffff 64bit]
[ 0.342474] pci 0000:07:00.0: PME# supported from D0 D3hot
[ 0.350308] pci 0000:00:02.0: PCI bridge to [bus 07]
[ 0.350314] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.350382] pci 0000:06:00.0: [1002:5b62] type 00 class 0x030000
[ 0.350391] pci 0000:06:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.350397] pci 0000:06:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.350404] pci 0000:06:00.0: reg 0x18: [mem 0xd8000000-0xd800ffff]
[ 0.350424] pci 0000:06:00.0: reg 0x30: [mem 0xd7fe0000-0xd7ffffff pref]
[ 0.350452] pci 0000:06:00.0: supports D1 D2
[ 0.350483] pci 0000:06:00.1: [1002:5b72] type 00 class 0x038000
[ 0.350491] pci 0000:06:00.1: reg 0x10: [mem 0xdc000000-0xdc00ffff]
[ 0.350542] pci 0000:06:00.1: supports D1 D2
[ 0.350566] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.350572] pci 0000:00:03.0: PCI bridge to [bus 06]
[ 0.350575] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.350577] pci 0000:00:03.0: bridge window [mem 0xd7f00000-0xdfffffff]
[ 0.350581] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.350614] pci 0000:00:07.0: PCI bridge to [bus 05]
[ 0.350652] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.350703] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.351020] pci 0000:02:00.0: [11ab:4380] type 00 class 0x020000
[ 0.351322] pci 0000:02:00.0: reg 0x10: [mem 0xfbcdc000-0xfbcdffff 64bit]
[ 0.351497] pci 0000:02:00.0: reg 0x18: [io 0xb800-0xb8ff]
[ 0.352077] pci 0000:02:00.0: reg 0x30: [mem 0xfbce0000-0xfbcfffff pref]
[ 0.352841] pci 0000:02:00.0: supports D1 D2
[ 0.352843] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.353278] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.353285] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.353288] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.353336] pci 0000:01:00.0: [13f6:0111] type 00 class 0x040100
[ 0.353355] pci 0000:01:00.0: reg 0x10: [io 0xa800-0xa8ff]
[ 0.353432] pci 0000:01:00.0: supports D1 D2
[ 0.353471] pci 0000:01:03.0: [104c:8023] type 00 class 0x0c0010
[ 0.353491] pci 0000:01:03.0: reg 0x10: [mem 0xfbbfb800-0xfbbfbfff]
[ 0.353503] pci 0000:01:03.0: reg 0x14: [mem 0xfbbfc000-0xfbbfffff]
[ 0.353569] pci 0000:01:03.0: supports D1 D2
[ 0.353570] pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.353631] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.353638] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.353645] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.353654] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.353655] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.353656] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.353657] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.353659] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.353660] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.354229] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.354283] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.354331] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.354384] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.354438] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.354489] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.354542] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.354594] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.354673] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.354677] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.354700] Found 1 acpi root devices
[ 0.354758] vgaarb: setting as boot device: PCI:0000:06:00.0
[ 0.354760] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.354761] vgaarb: loaded
[ 0.354762] vgaarb: bridge control possible 0000:06:00.0
[ 0.354869] SCSI subsystem initialized
[ 0.354992] libata version 3.00 loaded.
[ 0.355005] ACPI: bus type USB registered
[ 0.355014] usbcore: registered new interface driver usbfs
[ 0.355020] usbcore: registered new interface driver hub
[ 0.355032] usbcore: registered new device driver usb
[ 0.355103] PCI: Using ACPI for IRQ routing
[ 0.360507] PCI: Discovered peer bus ff
[ 0.360508] PCI: root bus ff: using default resources
[ 0.360508] PCI: Probing PCI hardware (bus ff)
[ 0.360525] PCI host bridge to bus 0000:ff
[ 0.360527] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.360528] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.360530] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.360534] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.360560] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.360586] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.360610] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.360635] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.360658] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.360682] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.360706] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.360729] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.360753] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.360777] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.360800] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.360824] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.360847] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.360871] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.360896] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.360919] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.360942] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.360966] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.360998] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.361001] PCI: pci_cache_line_size set to 64 bytes
[ 0.361126] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.361127] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.361180] NetLabel: Initializing
[ 0.361181] NetLabel: domain hash size = 128
[ 0.361182] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.361192] NetLabel: unlabeled traffic allowed by default
[ 0.361317] hpet clockevent registered
[ 0.361325] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.361332] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.361335] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.363537] Switched to clocksource hpet
[ 0.366877] AppArmor: AppArmor Filesystem Enabled
[ 0.366896] pnp: PnP ACPI init
[ 0.366905] ACPI: bus type PNP registered
[ 0.366955] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
[ 0.366957] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.366959] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.366960] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.366962] system 00:00: [mem 0xfec8a000-0xfec8afff] has been reserved
[ 0.366963] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.366966] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.366996] pnp 00:01: [dma 4]
[ 0.367009] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.367036] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.367076] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.367098] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.367456] system 00:05: [io 0x0a00-0x0adf] has been reserved
[ 0.367458] system 00:05: [io 0x0ae0-0x0aef] has been reserved
[ 0.367460] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.367587] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.367589] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.367590] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.367592] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.367594] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.367595] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.367597] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.367663] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.367711] system 00:08: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.367714] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.367785] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.367787] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.367789] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.367833] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.367835] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.367959] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.367961] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.367962] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.367964] system 00:0b: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.367965] system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.367967] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.368077] pnp: PnP ACPI: found 12 devices
[ 0.368078] ACPI: bus type PNP unregistered
[ 0.374502] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.374504] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.374507] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.374518] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.374533] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.374536] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.374537] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.374539] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.374540] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.374543] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
[ 0.374545] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.374547] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.374548] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.374551] pci 0000:00:01.0: PCI bridge to [bus 08]
[ 0.374553] pci 0000:00:01.0: bridge window [io 0xd000-0xefff]
[ 0.374556] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.374561] pci 0000:00:02.0: PCI bridge to [bus 07]
[ 0.374564] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.374569] pci 0000:00:03.0: PCI bridge to [bus 06]
[ 0.374571] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.374574] pci 0000:00:03.0: bridge window [mem 0xd7f00000-0xdfffffff]
[ 0.374576] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.374580] pci 0000:00:07.0: PCI bridge to [bus 05]
[ 0.374587] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.374594] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.374600] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.374607] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.374614] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.374623] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.374629] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.374636] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.374643] pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.374652] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.374658] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.374666] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.374676] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.374677] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.374679] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.374680] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.374681] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.374682] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.374684] pci_bus 0000:08: resource 0 [io 0xd000-0xefff]
[ 0.374685] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.374686] pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.374688] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.374689] pci_bus 0000:06: resource 1 [mem 0xd7f00000-0xdfffffff]
[ 0.374690] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.374692] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.374693] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd01fffff]
[ 0.374694] pci_bus 0000:03: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.374696] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.374697] pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.374698] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.374700] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.374701] pci_bus 0000:01: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.374702] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.374703] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.374705] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.374706] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.374707] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.374708] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.374711] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.374712] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.374733] NET: Registered protocol family 2
[ 0.374889] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.375023] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.375155] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.375171] TCP: reno registered
[ 0.375179] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.375203] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.375261] NET: Registered protocol family 1
[ 0.376728] pci 0000:06:00.0: Video device with shadowed ROM
[ 0.376780] PCI: CLS 256 bytes, default 64
[ 0.376811] Trying to unpack rootfs image as initramfs...
[ 0.714460] Freeing initrd memory: 26576K (ffff880034c08000 - ffff8800365fc000)
[ 0.714472] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.714473] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.714739] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
[ 0.714747] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
[ 0.714755] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
[ 0.714763] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
[ 0.714772] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
[ 0.714779] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
[ 0.714786] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
[ 0.714793] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
[ 0.714838] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.714839] Scanning for low memory corruption every 60 seconds
[ 0.715105] Initialise system trusted keyring
[ 0.715144] audit: initializing netlink socket (disabled)
[ 0.715153] type=2000 audit(1422563881.580:1): initialized
[ 0.734418] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.735240] zbud: loaded
[ 0.735362] VFS: Disk quotas dquot_6.5.2
[ 0.735394] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.735741] fuse init (API version 7.22)
[ 0.735800] msgmni has been set to 15946
[ 0.735838] Key type big_key registered
[ 0.736417] Key type asymmetric registered
[ 0.736419] Asymmetric key parser 'x509' registered
[ 0.736439] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.736487] io scheduler noop registered
[ 0.736488] io scheduler deadline registered (default)
[ 0.736505] io scheduler cfq registered
[ 0.736602] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.736662] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
[ 0.736719] pcieport 0000:00:03.0: irq 42 for MSI/MSI-X
[ 0.736776] pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
[ 0.736833] pcieport 0000:00:09.0: irq 44 for MSI/MSI-X
[ 0.736879] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.737016] pcieport 0000:00:1c.0: irq 45 for MSI/MSI-X
[ 0.737179] pcieport 0000:00:1c.4: irq 46 for MSI/MSI-X
[ 0.737264] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 0.737283] aer 0000:00:02.0:pcie02: service driver aer loaded
[ 0.737301] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 0.737319] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 0.737337] aer 0000:00:09.0:pcie02: service driver aer loaded
[ 0.737346] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.737348] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 0.737349] pci 0000:08:00.1: Signaling PME through PCIe PME interrupt
[ 0.737351] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.737357] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 0.737358] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 0.737361] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 0.737366] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 0.737368] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.737369] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 0.737371] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 0.737377] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.737379] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.737385] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 0.737387] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 0.737403] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.737410] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.737427] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.737428] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.737435] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.737444] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.737479] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 3a40 ss_vid 174b ss_did 1000
[ 0.737507] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.737519] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3a48 ss_vid 174b ss_did 1000
[ 0.737543] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[ 0.737546] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.737576] intel_idle: MWAIT substates: 0x1120
[ 0.737590] intel_idle: v0.4 model 0x1A
[ 0.737590] intel_idle: lapic_timer_reliable_states 0x2
[ 0.737760] ipmi message handler version 39.2
[ 0.737806] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.737809] ACPI: Power Button [PWRB]
[ 0.737830] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.737831] ACPI: Power Button [PWRF]
[ 0.738206] ACPI: Invalid active0 threshold
[ 0.738411] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.738412] ACPI: Thermal Zone [THRM] (22 C)
[ 0.738427] GHES: HEST is not enabled!
[ 0.738479] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.739632] Linux agpgart interface v0.103
[ 0.740645] brd: module loaded
[ 0.741177] loop: module loaded
[ 0.741257] ata_piix 0000:00:1f.2: version 2.13
[ 0.741342] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.742086] scsi0 : ata_piix
[ 0.742156] scsi1 : ata_piix
[ 0.742181] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 0.742188] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 0.742281] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.742916] scsi2 : ata_piix
[ 0.743035] scsi3 : ata_piix
[ 0.743059] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19
[ 0.743065] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19
[ 0.743236] libphy: Fixed MDIO Bus: probed
[ 0.743290] tun: Universal TUN/TAP device driver, 1.6
[ 0.743291] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.743329] PPP generic driver version 2.4.2
[ 0.743366] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.743368] ehci-pci: EHCI PCI platform driver
[ 0.743484] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.743489] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.743503] ehci-pci 0000:00:1a.7: debug port 1
[ 0.747443] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
[ 0.747457] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbaf6000
[ 0.755533] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.755580] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.755582] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.755583] usb usb1: Product: EHCI Host Controller
[ 0.755584] usb usb1: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[ 0.755585] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.755660] hub 1-0:1.0: USB hub found
[ 0.755665] hub 1-0:1.0: 6 ports detected
[ 0.755874] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.755877] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.755892] ehci-pci 0000:00:1d.7: debug port 1
[ 0.759803] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
[ 0.759817] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbafc000
[ 0.771535] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.771574] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.771576] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.771577] usb usb2: Product: EHCI Host Controller
[ 0.771578] usb usb2: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[ 0.771579] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.771773] hub 2-0:1.0: USB hub found
[ 0.771778] hub 2-0:1.0: 6 ports detected
[ 0.771886] ehci-platform: EHCI generic platform driver
[ 0.771890] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.771891] ohci-pci: OHCI PCI platform driver
[ 0.771898] ohci-platform: OHCI generic platform driver
[ 0.771901] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.772002] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.772005] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.772044] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008080
[ 0.772075] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.772077] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.772078] usb usb3: Product: UHCI Host Controller
[ 0.772079] usb usb3: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.772080] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.772263] hub 3-0:1.0: USB hub found
[ 0.772269] hub 3-0:1.0: 2 ports detected
[ 0.772421] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.772425] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.772465] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008400
[ 0.772496] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.772498] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.772499] usb usb4: Product: UHCI Host Controller
[ 0.772500] usb usb4: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.772501] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.772682] hub 4-0:1.0: USB hub found
[ 0.772688] hub 4-0:1.0: 2 ports detected
[ 0.772838] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.772841] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.772869] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008480
[ 0.772902] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.772904] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.772905] usb usb5: Product: UHCI Host Controller
[ 0.772906] usb usb5: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.772908] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.773090] hub 5-0:1.0: USB hub found
[ 0.773096] hub 5-0:1.0: 2 ports detected
[ 0.773246] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.773250] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.773279] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008800
[ 0.773311] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.773312] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.773314] usb usb6: Product: UHCI Host Controller
[ 0.773315] usb usb6: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.773316] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.773494] hub 6-0:1.0: USB hub found
[ 0.773500] hub 6-0:1.0: 2 ports detected
[ 0.773650] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.773654] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.773682] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008880
[ 0.773713] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.773715] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.773716] usb usb7: Product: UHCI Host Controller
[ 0.773717] usb usb7: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.773719] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.773900] hub 7-0:1.0: USB hub found
[ 0.773906] hub 7-0:1.0: 2 ports detected
[ 0.774053] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.774056] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.774084] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008c00
[ 0.774115] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.774117] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.774118] usb usb8: Product: UHCI Host Controller
[ 0.774119] usb usb8: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.774121] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.774299] hub 8-0:1.0: USB hub found
[ 0.774306] hub 8-0:1.0: 2 ports detected
[ 0.774408] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.774412] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 9
[ 0.774529] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X
[ 0.774534] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X
[ 0.774538] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X
[ 0.774544] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X
[ 0.774549] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X
[ 0.774553] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X
[ 0.774557] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X
[ 0.774561] xhci_hcd 0000:07:00.0: irq 54 for MSI/MSI-X
[ 0.774653] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.774655] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.774656] usb usb9: Product: xHCI Host Controller
[ 0.774657] usb usb9: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[ 0.774658] usb usb9: SerialNumber: 0000:07:00.0
[ 0.774766] hub 9-0:1.0: USB hub found
[ 0.774773] hub 9-0:1.0: 2 ports detected
[ 0.774825] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.774828] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
[ 0.777900] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.777902] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.777903] usb usb10: Product: xHCI Host Controller
[ 0.777904] usb usb10: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[ 0.777906] usb usb10: SerialNumber: 0000:07:00.0
[ 0.778011] hub 10-0:1.0: USB hub found
[ 0.778021] hub 10-0:1.0: 2 ports detected
[ 0.783642] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.784053] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.784057] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.784267] mousedev: PS/2 mouse device common for all mice
[ 0.784607] rtc_cmos 00:02: RTC can wake from S4
[ 0.784748] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.784784] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.784825] device-mapper: uevent: version 1.0.3
[ 0.784905] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.784911] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.784984] TCP: cubic registered
[ 0.785043] NET: Registered protocol family 10
[ 0.785169] NET: Registered protocol family 17
[ 0.785176] Key type dns_resolver registered
[ 0.785473] Loading compiled-in X.509 certificates
[ 0.786222] Loaded X.509 cert 'Magrathea: Glacier signing key: 55ab2fe28ed5c60df9587150d1734c920ea7b818'
[ 0.786228] registered taskstats version 1
[ 0.788859] Key type trusted registered
[ 0.791347] Key type encrypted registered
[ 0.793737] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.793741] IMA: No TPM chip found, activating TPM-bypass!
[ 0.794388] regulator-dummy: disabling
[ 0.794565] Magic number: 15:850:650
[ 0.794580] tty ttyprintk: hash matches
[ 0.794615] acpi LNXCPU:03: hash matches
[ 0.794792] rtc_cmos 00:02: setting system clock to 2015-01-29 20:38:02 UTC (1422563882)
[ 0.797234] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.797235] EDD information not available.
[ 0.797251] PM: Hibernation image not present or could not be loaded.
[ 1.074217] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.088824] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.394258] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 1.394275] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.535547] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.535564] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.535578] ata2.01: link offline, clearing class 3 to NONE
[ 1.543698] ata2.00: ATAPI: ASUS DRW-24F1ST a, 1.00, max UDMA/100
[ 1.559799] ata2.00: configured for UDMA/100
[ 1.561372] scsi 1:0:0:0: CD-ROM ASUS DRW-24F1ST a 1.00 PQ: 0 ANSI: 5
[ 1.563946] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.563948] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.564114] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.564200] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.565560] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.565562] Write protecting the kernel read-only data: 12288k
[ 1.567340] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[ 1.568775] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 1.587608] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 1.591510] systemd-udevd[181]: starting version 204
[ 1.603338] scsi4 : pata_marvell
[ 1.603407] scsi5 : pata_marvell
[ 1.603442] ata5: PATA max UDMA/100 cmd 0xe480 ctl 0xe400 bmdma 0xe800 irq 17
[ 1.603444] ata6: PATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe808 irq 17
[ 1.604994] ahci 0000:08:00.0: version 3.0
[ 1.605057] ahci 0000:08:00.0: irq 55 for MSI/MSI-X
[ 1.605069] ahci 0000:08:00.0: controller can do FBS, turning on CAP_FBS
[ 1.606285] sky2: driver version 1.30
[ 1.606593] sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
[ 1.607082] sky2 0000:02:00.0: irq 56 for MSI/MSI-X
[ 1.607868] sky2 0000:02:00.0 eth0: addr dc:9c:52:00:04:9d
[ 1.608665] [drm] Initialized drm 1.1.0 20060810
[ 1.619550] ahci 0000:08:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.619555] ahci 0000:08:00.0: flags: 64bit ncq fbs pio
[ 1.620354] scsi6 : ahci
[ 1.620438] scsi7 : ahci
[ 1.620543] scsi8 : ahci
[ 1.620613] scsi9 : ahci
[ 1.620772] scsi10 : ahci
[ 1.620909] scsi11 : ahci
[ 1.620981] scsi12 : ahci
[ 1.621071] scsi13 : ahci
[ 1.621114] ata7: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef100 irq 55
[ 1.621117] ata8: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef180 irq 55
[ 1.621119] ata9: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef200 irq 55
[ 1.621121] ata10: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef280 irq 55
[ 1.621124] ata11: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef300 irq 55
[ 1.621126] ata12: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef380 irq 55
[ 1.621128] ata13: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef400 irq 55
[ 1.621130] ata14: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef480 irq 55
[ 1.625971] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[ 1.625973] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.625974] usb 2-3: Product: 802.11 n WLAN
[ 1.625976] usb 2-3: Manufacturer: Ralink
[ 1.625977] usb 2-3: SerialNumber: 1.0
[ 1.632484] [drm] radeon kernel modesetting enabled.
[ 1.632835] [drm] initializing kernel modesetting (RV380 0x1002:0x5B62 0x174B:0x0490).
[ 1.632856] [drm] register mmio base: 0xD8000000
[ 1.632858] [drm] register mmio size: 65536
[ 1.632930] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.632934] radeon 0000:06:00.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 1.632935] radeon 0000:06:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 1.632939] [drm] Detected VRAM RAM=256M, BAR=256M
[ 1.632940] [drm] RAM width 128bits DDR
[ 1.633094] [TTM] Zone kernel: Available graphics memory: 4083616 kiB
[ 1.633098] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.633099] [TTM] Initializing pool allocator
[ 1.633104] [TTM] Initializing DMA pool allocator
[ 1.633128] [drm] radeon: 256M of VRAM memory ready
[ 1.633130] [drm] radeon: 512M of GTT memory ready.
[ 1.633145] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.633531] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 1.634036] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 1.634050] radeon 0000:06:00.0: WB enabled
[ 1.634052] radeon 0000:06:00.0: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0xffff880035bd7000
[ 1.634053] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.634054] [drm] Driver supports precise vblank timestamp query.
[ 1.634069] radeon 0000:06:00.0: irq 57 for MSI/MSI-X
[ 1.634075] radeon 0000:06:00.0: radeon: using MSI.
[ 1.634090] [drm] radeon: irq initialized.
[ 1.634097] [drm] Loading R300 Microcode
[ 1.634336] [drm] radeon: ring at 0x00000000A0001000
[ 1.634355] [drm] ring test succeeded in 1 usecs
[ 1.634565] [drm] ib test succeeded in 0 usecs
[ 1.634746] [drm] Radeon Display Connectors
[ 1.634747] [drm] Connector 0:
[ 1.634748] [drm] VGA-1
[ 1.634749] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 1.634750] [drm] Encoders:
[ 1.634750] [drm] CRT1: INTERNAL_DAC1
[ 1.634751] [drm] Connector 1:
[ 1.634752] [drm] DVI-I-1
[ 1.634753] [drm] HPD1
[ 1.634754] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 1.634754] [drm] Encoders:
[ 1.634755] [drm] CRT2: INTERNAL_DAC2
[ 1.634756] [drm] DFP1: INTERNAL_TMDS1
[ 1.634756] [drm] Connector 2:
[ 1.634757] [drm] SVIDEO-1
[ 1.634758] [drm] Encoders:
[ 1.634758] [drm] TV1: INTERNAL_DAC2
[ 1.667658] firewire_ohci 0000:01:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.691916] [drm] fb mappable at 0xC00C0000
[ 1.691917] [drm] vram apper at 0xC0000000
[ 1.691918] [drm] size 5242880
[ 1.691918] [drm] fb depth is 24
[ 1.691919] [drm] pitch is 5120
[ 1.692004] fbcon: radeondrmfb (fb0) is primary device
[ 1.742223] tsc: Refined TSC clocksource calibration: 3219.929 MHz
[ 1.746801] Console: switching to colour frame buffer device 160x64
[ 1.751251] radeon 0000:06:00.0: fb0: radeondrmfb frame buffer device
[ 1.751252] radeon 0000:06:00.0: registered panic notifier
[ 1.751255] [drm] Initialized radeon 2.36.0 20080528 for 0000:06:00.0 on minor 0
[ 1.939577] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.939598] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.943607] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.943643] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.943790] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.944027] ata14.00: configured for UDMA/66
[ 1.947659] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.947685] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.947710] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.947733] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.948884] ata7.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[ 1.948889] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.949791] ata7.00: configured for UDMA/133
[ 1.950179] scsi 6:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[ 1.950374] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 1.950417] sd 6:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.950422] sd 6:0:0:0: [sda] 4096-byte physical blocks
[ 1.950718] sd 6:0:0:0: [sda] Write Protect is off
[ 1.950723] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.950930] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.955889] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.956055] scsi 13:0:0:0: Attached scsi generic sg2 type 3
[ 2.027267] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.029723] sd 6:0:0:0: [sda] Attached SCSI disk
[ 2.127642] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.175617] firewire_core 0000:01:03.0: created device fw0: GUID f698f698fbbf5e21, S400
[ 2.190074] usb 3-2: New USB device found, idVendor=1631, idProduct=a510
[ 2.190079] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.190082] usb 3-2: Product: USB HUB Keyboard
[ 2.190084] usb 3-2: Manufacturer: Chicony
[ 2.193081] hub 3-2:1.0: USB hub found
[ 2.195041] hub 3-2:1.0: 5 ports detected
[ 2.196039] hub 3-2:1.0: insufficient power available to use all downstream ports
[ 2.439640] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 2.481279] usb 6-2: New USB device found, idVendor=0cf3, idProduct=3005
[ 2.481284] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.723622] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 2.739688] Switched to clocksource tsc
[ 3.263824] random: nonblocking pool is initialized
[ 3.596914] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.652325] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.775858] systemd-udevd[405]: starting version 204
[ 8.189090] lp: driver loaded but no devices found
[ 8.327023] snd_hda_intel 0000:00:1b.0: irq 58 for MSI/MSI-X
[ 8.337867] SKU: Nid=0x1d sku_cfg=0x4005e601
[ 8.337868] SKU: port_connectivity=0x1
[ 8.337869] SKU: enable_pcbeep=0x0
[ 8.337869] SKU: check_sum=0x00000005
[ 8.337870] SKU: customization=0x000000e6
[ 8.337871] SKU: external_amp=0x0
[ 8.337871] SKU: platform_type=0x0
[ 8.337872] SKU: swap=0x0
[ 8.337873] SKU: override=0x1
[ 8.338325] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 8.338326] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.338327] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.338328] mono: mono_out=0x0
[ 8.338328] dig-out=0x1e/0x0
[ 8.338329] inputs:
[ 8.338330] Front Mic=0x19
[ 8.338331] Rear Mic=0x18
[ 8.338332] Line=0x1a
[ 8.338332] dig-in=0x1f
[ 8.338333] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 8.338334] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
[ 8.349540] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.349643] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.349728] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.349797] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.349835] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.349884] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 8.349955] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 8.462901] ppdev: user-space parallel port driver
[ 8.658502] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 8.796651] kvm: disabled by bios
[ 8.813403] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 8.813409] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.813440] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.838252] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 8.839602] EDAC MC: Ver: 3.0.0
[ 8.891626] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 8.891682] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 8.891770] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 9.321708] type=1400 audit(1422563891.020:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=610 comm="apparmor_parser"
[ 9.321713] type=1400 audit(1422563891.020:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=610 comm="apparmor_parser"
[ 9.321716] type=1400 audit(1422563891.020:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=610 comm="apparmor_parser"
[ 9.321724] type=1400 audit(1422563891.020:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=608 comm="apparmor_parser"
[ 9.321728] type=1400 audit(1422563891.020:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=608 comm="apparmor_parser"
[ 9.321731] type=1400 audit(1422563891.020:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=608 comm="apparmor_parser"
[ 9.322039] type=1400 audit(1422563891.020:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=610 comm="apparmor_parser"
[ 9.322042] type=1400 audit(1422563891.020:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=610 comm="apparmor_parser"
[ 9.322055] type=1400 audit(1422563891.020:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=608 comm="apparmor_parser"
[ 9.322059] type=1400 audit(1422563891.020:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=608 comm="apparmor_parser"
[ 9.352171] Bluetooth: Core ver 2.17
[ 9.352188] NET: Registered protocol family 31
[ 9.352189] Bluetooth: HCI device and connection manager initialized
[ 9.352196] Bluetooth: HCI socket layer initialized
[ 9.352198] Bluetooth: L2CAP socket layer initialized
[ 9.352201] Bluetooth: SCO socket layer initialized
[ 9.382194] usbcore: registered new interface driver btusb
[ 9.717108] cfg80211: Calling CRDA to update world regulatory domain
[ 9.819013] cfg80211: World regulatory domain updated:
[ 9.819016] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.819017] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.819018] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.819019] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.819020] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.819021] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.134775] usb 8-2: device not accepting address 2, error -110
[ 13.246949] usb 8-2: new full-speed USB device number 3 using uhci_hcd
[ 13.812290] init: failsafe main process (796) killed by TERM signal
[ 14.419579] audit_printk_skb: 6 callbacks suppressed
[ 14.419582] type=1400 audit(1422563896.120:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=935 comm="apparmor_parser"
[ 14.419589] type=1400 audit(1422563896.120:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=935 comm="apparmor_parser"
[ 14.419594] type=1400 audit(1422563896.120:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=935 comm="apparmor_parser"
[ 14.420076] type=1400 audit(1422563896.120:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=935 comm="apparmor_parser"
[ 14.420081] type=1400 audit(1422563896.120:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=935 comm="apparmor_parser"
[ 14.420328] type=1400 audit(1422563896.120:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=935 comm="apparmor_parser"
[ 14.420795] type=1400 audit(1422563896.120:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=940 comm="apparmor_parser"
[ 14.420799] type=1400 audit(1422563896.120:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=940 comm="apparmor_parser"
[ 14.421128] type=1400 audit(1422563896.120:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=940 comm="apparmor_parser"
[ 14.509953] type=1400 audit(1422563896.208:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=939 comm="apparmor_parser"
[ 17.141376] init: gdm main process (1219) killed by TERM signal
[ 17.326717] Bluetooth: RFCOMM TTY layer initialized
[ 17.326725] Bluetooth: RFCOMM socket layer initialized
[ 17.326728] Bluetooth: RFCOMM ver 1.11
[ 17.868790] init: cups main process (1139) killed by HUP signal
[ 17.868798] init: cups main process ended, respawning
[ 18.092933] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.092935] Bluetooth: BNEP filters: protocol multicast
[ 18.092942] Bluetooth: BNEP socket layer initialized
[ 19.318294] init: samba-ad-dc main process (1188) terminated with status 1
[ 21.192861] sky2 0000:02:00.0 eth0: enabling interface
[ 21.193573] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.196937] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.654164] usb 8-2: device not accepting address 3, error -110
[ 23.766319] usb 8-2: new full-speed USB device number 4 using uhci_hcd
[ 24.251006] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 24.251027] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.370849] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 24.373248] vboxdrv: Found 8 processor cores.
[ 24.373430] vboxdrv: fAsync=0 offMin=0x1e6 offMax=0x224a
[ 24.373494] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 24.373496] vboxdrv: Successfully loaded version 4.3.20 (interface 0x001a0008).
[ 24.600109] vboxpci: IOMMU not found (not registered)
[ 26.406522] init: plymouth-upstart-bridge main process ended, respawning
[ 26.410200] init: plymouth-upstart-bridge main process (1600) terminated with status 1
[ 26.410208] init: plymouth-upstart-bridge main process ended, respawning
[ 28.974605] init: plymouth-stop pre-start process (1817) terminated with status 1
[ 38.876058] usb 8-2: device descriptor read/64, error -110
[ 45.660740] audit_printk_skb: 138 callbacks suppressed
[ 45.660742] type=1400 audit(1422563927.369:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2277 comm="apparmor_parser"
[ 45.660746] type=1400 audit(1422563927.369:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2277 comm="apparmor_parser"
[ 45.661063] type=1400 audit(1422563927.369:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2277 comm="apparmor_parser"
[ 54.083488] usb 8-2: device descriptor read/64, error -110
[ 54.299404] usb 8-2: new full-speed USB device number 5 using uhci_hcd
[ 69.402890] usb 8-2: device descriptor read/64, error -110
[ 84.614441] usb 8-2: device descriptor read/64, error -110
[ 84.718268] hub 8-0:1.0: unable to enumerate USB device on port 2
[ 84.830209] usb 2-3: reset high-speed USB device number 3 using ehci-pci
[ 84.861711] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 84.889839] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 84.890253] ieee80211 phy0: Failed to initialize wep: -2
[ 84.890263] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 84.890472] usbcore: registered new interface driver rt2800usb
[ 84.930226] systemd-udevd[2503]: renamed network interface wlan0 to wlan1
[ 84.933832] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 84.967157] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 85.203899] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 85.205010] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 85.207692] usb 3-2.1: new low-speed USB device number 3 using uhci_hcd
[ 85.274715] usb 3-2.1: New USB device found, idVendor=1631, idProduct=0006
[ 85.274718] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 85.274719] usb 3-2.1: Product: IR Receiver
[ 85.274721] usb 3-2.1: Manufacturer: Chicony
[ 85.367676] usb 3-2.2: new low-speed USB device number 4 using uhci_hcd
[ 85.430715] usb 3-2.2: New USB device found, idVendor=045e, idProduct=0084
[ 85.430718] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 85.430720] usb 3-2.2: Product: Basic Optical Mouse
[ 85.430721] usb 3-2.2: Manufacturer: Microsoft
[ 85.523724] usb 3-2.3: new full-speed USB device number 5 using uhci_hcd
[ 85.579739] usb 3-2.3: New USB device found, idVendor=08ff, idProduct=2580
[ 85.579743] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 85.579745] usb 3-2.3: Product: Fingerprint Sensor
[ 85.675717] usb 3-2.5: new full-speed USB device number 6 using uhci_hcd
[ 85.741716] usb 3-2.5: New USB device found, idVendor=1631, idProduct=0510
[ 85.741720] usb 3-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 85.741722] usb 3-2.5: Product: USB HUB Keyboard
[ 85.741723] usb 3-2.5: Manufacturer: Chicony
[ 85.776107] hidraw: raw HID events driver (C) Jiri Kosina
[ 85.837902] usbcore: registered new interface driver usbhid
[ 85.837907] usbhid: USB HID core driver
[ 85.874690] input: Chicony IR Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input12
[ 85.874784] hid-generic 0003:1631:0006.0001: input,hiddev0,hidraw0: USB HID v1.10 Keyboard [Chicony IR Receiver] on usb-0000:00:1a.0-2.1/input0
[ 85.874854] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input13
[ 85.874930] hid-generic 0003:045E:0084.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-2.2/input0
[ 85.875041] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.5/3-2.5:1.0/input/input14
[ 85.875104] hid-generic 0003:1631:0510.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony USB HUB Keyboard ] on usb-0000:00:1a.0-2.5/input0
[ 85.879678] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.5/3-2.5:1.1/input/input15
[ 85.879749] hid-generic 0003:1631:0510.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Chicony USB HUB Keyboard ] on usb-0000:00:1a.0-2.5/input1
[ 106.018946] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 106.110253] ISOFS: changing to secondary rootBonsoir nam1962, merci pour ta participation.
cat /etc/apt/sources.list
cat /etc/apt/sources.list
# deb cdrom:[Ubuntu 14.04 LTS _Trusty Tahr_ - Release amd64 (20140417)]/ trusty main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty universe
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu trusty-security main restricted
deb http://security.ubuntu.com/ubuntu trusty-security universe
deb http://security.ubuntu.com/ubuntu trusty-security multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu trusty partner
deb-src http://archive.canonical.com/ubuntu trusty partner
## This software is not part of Ubuntu, but is offered by third-party
## developers who want to ship their latest software.
deb http://extras.ubuntu.com/ubuntu trusty main
deb-src http://extras.ubuntu.com/ubuntu trusty main
# deb http://debian.scribus.net/debian/ raring main
# deb-src http://debian.scribus.net/debian/ raring main
# deb http://debian.tagancha.org/debian/ raring main
# deb-src http://debian.tagancha.org/debian/ raring main
deb http://ppa.launchpad.net/scribus/ppa/ubuntu trusty main
# deb-src http://ppa.launchpad.net/scribus/ppa/ubuntu trusty mainPar contre pour cette commande : cat /etc/apt/sources.list/*
cat /etc/apt/sources.list/*
cat: /etc/apt/sources.list/*: N'est pas un dossierSaphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#38 Le 29/01/2015, à 21:54
- nany
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
nam1962 a écrit :
[…]
Pas vu les résultats de :cat /etc/apt/sources.list(Genre y'a t'il du proposed qui traîne ?)
de :cat /etc/apt/sources.list/*(genre y'a t'il de l'exotique ?)
Je ne sais pas s’il peut y avoir des trucs gênants au démarrage mais pourquoi pas ?
Sinon, tes deux lignes peuvent se regrouper en une seule :
find /etc/apt -name '*.list' -exec bash -c 'echo -e "\n$1\n"; nl -ba "$1"' _ '{}' \;C’est plus lisible et ça a plus de style. 
Source : la doc ppa, chapitre 1.
Ne sais pas si les firmware-nonfree sont installés (genre y a t'il un machin qui ne trouve pas le bonne définition d'un bidule)
Oui, c’est installé.
Ni si la swappiness est bien réglée (sur le dernier point je ne suis pas sûr de moi : euhh, ça fait du bien, mais avant ou après le démarrage)
[…]
Ça fait du bien après.
Hors ligne
#39 Le 29/01/2015, à 22:05
- nany
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Pinaise ! Je viens de tomber sur un truc tout simpliste. Inbox était dans le vrai avec sa proposition.
Ce qui est proposé est de débrancher tous les périphériques usb, de couper le courant (donc, avoir fermer toutes les applications ouvertes avant) et de patienter deux minutes (tu dois commencer à en avoir l’habitude) puis de rebrancher les périphériques et redémarrer.
Ça ne coûte rien d’essayer. 
Dernière modification par nany (Le 29/01/2015, à 22:17)
Hors ligne
#40 Le 29/01/2015, à 22:17
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
find /etc/apt -name '*.list' -exec bash -c 'echo -e "\n$1\n"; nl -ba "$1"' _ '{}' \;
/etc/apt/sources.list
1 # deb cdrom:[Ubuntu 14.04 LTS _Trusty Tahr_ - Release amd64 (20140417)]/ trusty main restricted
2
3 # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
4 # newer versions of the distribution.
5 deb http://fr.archive.ubuntu.com/ubuntu/ trusty main restricted
6
7 ## Major bug fix updates produced after the final release of the
8 ## distribution.
9 deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
10
11 ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
12 ## team. Also, please note that software in universe WILL NOT receive any
13 ## review or updates from the Ubuntu security team.
14 deb http://fr.archive.ubuntu.com/ubuntu/ trusty universe
15 deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates universe
16
17 ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
18 ## team, and may not be under a free licence. Please satisfy yourself as to
19 ## your rights to use the software. Also, please note that software in
20 ## multiverse WILL NOT receive any review or updates from the Ubuntu
21 ## security team.
22 deb http://fr.archive.ubuntu.com/ubuntu/ trusty multiverse
23 deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
24
25 ## N.B. software from this repository may not have been tested as
26 ## extensively as that contained in the main release, although it includes
27 ## newer versions of some applications which may provide useful features.
28 ## Also, please note that software in backports WILL NOT receive any review
29 ## or updates from the Ubuntu security team.
30 deb http://fr.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
31
32 deb http://security.ubuntu.com/ubuntu trusty-security main restricted
33 deb http://security.ubuntu.com/ubuntu trusty-security universe
34 deb http://security.ubuntu.com/ubuntu trusty-security multiverse
35
36 ## Uncomment the following two lines to add software from Canonical's
37 ## 'partner' repository.
38 ## This software is not part of Ubuntu, but is offered by Canonical and the
39 ## respective vendors as a service to Ubuntu users.
40 deb http://archive.canonical.com/ubuntu trusty partner
41 deb-src http://archive.canonical.com/ubuntu trusty partner
42
43 ## This software is not part of Ubuntu, but is offered by third-party
44 ## developers who want to ship their latest software.
45 deb http://extras.ubuntu.com/ubuntu trusty main
46 deb-src http://extras.ubuntu.com/ubuntu trusty main
47 # deb http://debian.scribus.net/debian/ raring main
48 # deb-src http://debian.scribus.net/debian/ raring main
49 # deb http://debian.tagancha.org/debian/ raring main
50 # deb-src http://debian.tagancha.org/debian/ raring main
51 deb http://ppa.launchpad.net/scribus/ppa/ubuntu trusty main
52 # deb-src http://ppa.launchpad.net/scribus/ppa/ubuntu trusty main
/etc/apt/sources.list.d/tualatrix-ppa-trusty.list
1 deb http://ppa.launchpad.net/tualatrix/ppa/ubuntu trusty main
2 # deb-src http://ppa.launchpad.net/tualatrix/ppa/ubuntu trusty main
/etc/apt/sources.list.d/andykimpe-hostapd-trusty.list
1 deb http://ppa.launchpad.net/andykimpe/hostapd/ubuntu trusty main
2 # deb-src http://ppa.launchpad.net/andykimpe/hostapd/ubuntu trusty main
3 # deb-src http://ppa.launchpad.net/andykimpe/hostapd/ubuntu trusty main
/etc/apt/sources.list.d/manatlan-ppa-trusty.list
1 deb http://ppa.launchpad.net/manatlan/ppa/ubuntu trusty main
2 # deb-src http://ppa.launchpad.net/manatlan/ppa/ubuntu trusty main
/etc/apt/sources.list.d/webupd8team-java-trusty.list
1 deb http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main
2 # deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main
/etc/apt/sources.list.d/gnome3-team-gnome3-trusty.list
1 deb http://ppa.launchpad.net/gnome3-team/gnome3/ubuntu trusty main
2 # deb-src http://ppa.launchpad.net/gnome3-team/gnome3/ubuntu trusty main
/etc/apt/sources.list.d/x2go-stable-trusty.list
1 deb http://ppa.launchpad.net/x2go/stable/ubuntu trusty main
2 # deb-src http://ppa.launchpad.net/x2go/stable/ubuntu trusty main
/etc/apt/sources.list.d/yannubuntu-boot-repair-trusty.list
1 deb http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu trusty main
2 # deb-src http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu trusty mainPour la swappiness, si c'est pour l'optimisation de l'utilisation de la RAM, je l'avais deja fais en suivant ce tuto : http://geekeries.de-labrusse.fr/?p=1806
Mais comme l'a dit Nany, ses avantages se constatent après le boot, et encore, il faut déja atteindre la limite par defaut fixée par ubuntu (40% de la RAM) pour commencer à utiliser le disque dure.
Pendant que j'y pense, je n'ai pas de swapp (enfin 5Mo, c'est presque 0). C'etait une erreur, lors de l'installation du systeme. Je voulais mettre 5Go.
En même temps, mon systeme n'a jamais eu besoin de la swap puisqu'il depasse très rarement les 4Go de RAM. (et je n'ai plus trouvé l'intéret de modifier la taille de la swap).
Et au demarrage il est à environ 1,2Go de RAM) de RAM utilisé, donc ça m'etonnerai la lenteur vienne de là.
je vais m'absenter 2-3h.
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#41 Le 29/01/2015, à 23:39
- MrKebi
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Salut
ngmsky a écrit :
Et au demarrage il est à environ 1,2Go de RAM
Même en ayant Unity comme environnement, ça me parait élevé comme consommation de ram au démarrage non ?
PC : i7-4770k 24Go RX 580 120Go SSD + 1Tox2 HDD: Archlinux/Plasma
Laptop 1 : ThinkPad p50 i7-6820HQ 32Go 256Gox2 SSD + 500Go HDD : Archlinux/Plasma, optimus-manager
Laptop 2 : Xiaomi Mi Notebook Pro i5-8250u 8Go 240Go msata : Archlinux/XFCE, optimus-manager
Laptop 3 : HP Pavillion g6 1354ef i5-2450m 4Go 120Go SSD : Archlinux/Plasma
Hors ligne
#42 Le 30/01/2015, à 00:37
- Bougron
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bonsoir
Je pense qu'il y a un certain nombre de problèmes dans ce micro.
Vous en avez relevé quelques uns, L'un des deux que je vais évoqué a été signalé mais je ne sais pas voir s'il est en cours de traitement.
Si on admet qu'il est possible de booter en 20 secondes, toute action qui dépasse 20 secondes est anormale
J'en a relevé 2 dans le dernier DMESG fourni. Je ne sais pas expliquer les causes.
[48.708419] usb 8-2: device descriptor read/64, error -110
[ 63.915961] usb 8-2: device descriptor read/64, error -110
[ 64.131788] usb 8-2: new full-speed USB device number 4 using uhci_hcd
[ 74.533877] usb 8-2: device not accepting address 4, error -110
[ 74.645967] usb 8-2: new full-speed USB device number 5 using uhci_hcd
[ 85.047996] usb 8-2: device not accepting address 5, error -110
[ 85.048076] hub 8-0:1.0: unable to enumerate USB device on port 2
[ 85.160004] usb 2-3: reset high-speed USB device number 3 using ehci-pci======> Il se passe 37 secondes dans cette action <===========
Ce problème a déjà été signalé mais je n'ai pas trop vu où il est traité
et rien sur internet international avec l'erreur 110
[ 86.618014] hid-generic 0003:1631:0510.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony USB HUB Keyboard ] on usb-0000:00:1a.0-2.5/input0
[ 86.622586] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.5/3-2.5:1.1/input/input15
[ 86.622686] hid-generic 0003:1631:0510.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Chicony USB HUB Keyboard ] on usb-0000:00:1a.0-2.5/input1
[ 105.802244] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 105.843277] ISOFS: changing to secondary root=====> et encore 19 secondes dans cette action <=========== => Cela me semble être lié au clavier ou au joliet => Le graveur
Je penche plutôt pour le problème 'joliet" car cette expression n'est pas présente dans mon DMESG
Je ne sais pas s'il est pris en compte
Dernière modification par Bougron (Le 30/01/2015, à 01:09)
Hors ligne
#43 Le 30/01/2015, à 01:08
- Bougron
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
nam1962 a écrit :
Je passe un bref instant sur le fil.
........
Ni si la swappiness est bien réglée (sur le dernier point je ne suis pas sûr de moi : euhh, ça fait du bien, mais avant ou après le démarrage)Toutes mes confuses si j'ai lu trop vite et que mes questions s'avèrent résolues ou bébêtes: !
Bonsoir.
Tu as lu trop vite le début de la description
Ce PC dispose de 8 Go de ram. Au mieux on peut se demander pourquoi il y a du swap de défini!
Hors ligne
#44 Le 30/01/2015, à 03:21
- moko138
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
"3.13.0-43" : déjà, mets à jour ton système.
Ensuite, donne la taille de .xsession-errors
Et surtout
sudo lshw|grep -iC 10 usb@8:2On va probablement tomber sur le lecteur de cartes-mémoire, (et son driver).
Dernière modification par moko138 (Le 30/01/2015, à 03:26)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#45 Le 30/01/2015, à 09:14
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bonjour,
je m'excuse parce que, hier, je me endormis en faisant le dernier test proposé par Nany (conséquence normale de la fatigule cumulée) .
Bon j'ai débranché tout les périphériques usb, éteint le pc, et je viens de le rallumer, puis j'ai rebranché tout les péripherique usb (clavier, souris imprimante et le haut parleur, qui s'alimente en usb).
J'ai ensuite éteint puis redémarré pour évaluer le temps.
Constat fait :
- arrivé au moment de la saisie du mot de passe (etp3), le temps d'attente que le clavier et souris se débloquent 'deviennent actifs) est passé de 60 à 11 secondes.
Mais le temps d'attente des autres étapes (etp1, 3 et 4) n'a pas changé.
Ce qui fait un temps d'attente total de 1min46s contre 2min30 au commencement.
Etat actuel :
Les 4 étapes de démarrage et leurs temps d'attentes (approximatifs) :
- Problème 1 :
etp1/ de l’appuie sur le bouton jusqu'au menu (grub) du choix du systeme : 33 secondes
etp2/ du choix du système (Ubuntu), jusqu'à l'interface d'ouverture session graphique (lightdm) : 32 secondes
- Problème 3 :
etp3/ temps d'attente que les périphériques usb (clavier et souris) se débloquent : 11 secondes (contre 60 avant)
- Problème 4 :
etp4/ (après la saisie du mot de passe), temps d'attente pour que la session graphique demarre complètement (affichage du Bureau gnome, les icones, et le tableau de bord) : 25 secondes
D'ou un total d'environ : 106 contre 150 secondes avant.
C'est déja mieux mas normalement, il n'y a aucune raison d'attendre 11 seconde pour que le clavier/souris fonctionnent alors que l'interface de connexion (authentification) est déja affiché.
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#46 Le 30/01/2015, à 09:25
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
moko138 a écrit :
"3.13.0-43" : déjà, mets à jour ton système.
Ensuite, donne la taille de .xsession-errors
Et surtoutsudo lshw|grep -iC 10 usb@8:2On va probablement tomber sur le lecteur de cartes-mémoire, (et son driver).
Merci moko138 pour ta proposiition.
Par contre, pour mettre ajour le système, je ne sais pas quel commande taper entre :
1/ sudo aptitude updade + sudo aptitude upgrade
2/ sudo aptitude updade + sudo aptitude safe-upgrade
3/ sudo aptitude updade + sudo aptitude upgrade
4/ sudo aptitude updade + sudo aptitude safe-upgrade Pour rappel, depuis que j'ai installé ce pc (environ 8mois) , j'ai toujours fait 1/
car sur la doc ubuntu, il paraitrait que aptitude serait mieux que apt car il gererait mieux les dépendances (de façon automatique) et garantie ou plutôt rassure une bonne installation.
C'est ceque j'ai cru comprendre.
Voila pourquoi, je me demande, s'il faut apt ou aptitude.
Deplus, pour l'upgrade, faut-t-il le safe ou non ?
BOn en attendant vos réponse, je vais quand même faire comme d'habitude (1/)et je vous posterai les resultats des commandes demandées.
Dernière modification par ngmsky (Le 30/01/2015, à 09:25)
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#47 Le 30/01/2015, à 09:36
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
sudo aptitude updade
sudo aptitude update
[sudo] password for jean8v32:
Ignoré http://security.ubuntu.com trusty-security InRelease
Ignoré http://archive.canonical.com trusty InRelease
Ignoré http://extras.ubuntu.com trusty InRelease
Ignoré http://ppa.launchpad.net trusty InRelease
Atteint http://security.ubuntu.com trusty-security Release.gpg
Atteint http://archive.canonical.com trusty Release.gpg
Atteint http://extras.ubuntu.com trusty Release.gpg
Ignoré http://ppa.launchpad.net trusty InRelease
Atteint http://security.ubuntu.com trusty-security Release
Atteint http://archive.canonical.com trusty Release
Atteint http://extras.ubuntu.com trusty Release
Ignoré http://ppa.launchpad.net trusty InRelease
Atteint http://security.ubuntu.com trusty-security/main amd64 Packages
Ignoré http://fr.archive.ubuntu.com trusty InRelease
Ignoré http://ppa.launchpad.net trusty InRelease
Atteint http://archive.canonical.com trusty/partner Sources
Atteint http://extras.ubuntu.com trusty/main Sources
Atteint http://security.ubuntu.com trusty-security/restricted amd64 Packages
Ignoré http://ppa.launchpad.net trusty InRelease
Atteint http://archive.canonical.com trusty/partner amd64 Packages
Atteint http://extras.ubuntu.com trusty/main amd64 Packages
Atteint http://security.ubuntu.com trusty-security/universe amd64 Packages
Ignoré http://ppa.launchpad.net trusty InRelease
Atteint http://archive.canonical.com trusty/partner i386 Packages
Atteint http://extras.ubuntu.com trusty/main i386 Packages
Atteint http://security.ubuntu.com trusty-security/multiverse amd64 Packages
Ignoré http://fr.archive.ubuntu.com trusty-updates InRelease
Ignoré http://ppa.launchpad.net trusty InRelease
Atteint http://archive.canonical.com trusty/partner Translation-en
Atteint http://security.ubuntu.com trusty-security/main i386 Packages
Ignoré http://ppa.launchpad.net trusty InRelease
Atteint http://security.ubuntu.com trusty-security/restricted i386 Packages
Prendre : 1 http://ppa.launchpad.net trusty Release.gpg [316 B]
Atteint http://security.ubuntu.com trusty-security/universe i386 Packages
Ignoré http://fr.archive.ubuntu.com trusty-backports InRelease
Atteint http://ppa.launchpad.net trusty Release.gpg
Atteint http://security.ubuntu.com trusty-security/multiverse i386 Packages
Atteint http://ppa.launchpad.net trusty Release.gpg
Atteint http://security.ubuntu.com trusty-security/main Translation-en
Ignoré http://ppa.launchpad.net trusty Release.gpg
Atteint http://security.ubuntu.com trusty-security/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com trusty Release.gpg
Atteint http://ppa.launchpad.net trusty Release.gpg
Atteint http://security.ubuntu.com trusty-security/restricted Translation-en
Atteint http://ppa.launchpad.net trusty Release.gpg
Atteint http://security.ubuntu.com trusty-security/universe Translation-en
Atteint http://ppa.launchpad.net trusty Release.gpg
Atteint http://fr.archive.ubuntu.com trusty-updates Release.gpg
Atteint http://ppa.launchpad.net trusty Release.gpg
Atteint http://ppa.launchpad.net trusty Release
Ignoré http://ppa.launchpad.net trusty Release
Atteint http://ppa.launchpad.net trusty Release
Atteint http://fr.archive.ubuntu.com trusty-backports Release.gpg
Atteint http://ppa.launchpad.net trusty Release
Ignoré http://ppa.launchpad.net trusty Release
Atteint http://fr.archive.ubuntu.com trusty Release
Atteint http://ppa.launchpad.net trusty Release
Ignoré http://extras.ubuntu.com trusty/main Translation-fr_FR
Atteint http://ppa.launchpad.net trusty Release
Atteint http://ppa.launchpad.net trusty Release
Atteint http://fr.archive.ubuntu.com trusty-updates Release
Atteint http://ppa.launchpad.net trusty Release
Ignoré http://extras.ubuntu.com trusty/main Translation-fr
Ignoré http://ppa.launchpad.net trusty/main amd64 Packages/DiffIndex
Ignoré http://extras.ubuntu.com trusty/main Translation-en_GB
Ignoré http://ppa.launchpad.net trusty/main i386 Packages/DiffIndex
Atteint http://fr.archive.ubuntu.com trusty-backports Release
Ignoré http://extras.ubuntu.com trusty/main Translation-en
Atteint http://fr.archive.ubuntu.com trusty/main amd64 Packages
Atteint http://ppa.launchpad.net trusty/main Translation-en
Atteint http://ppa.launchpad.net trusty/main amd64 Packages
Atteint http://ppa.launchpad.net trusty/main i386 Packages
Atteint http://fr.archive.ubuntu.com trusty/restricted amd64 Packages
Atteint http://fr.archive.ubuntu.com trusty/universe amd64 Packages
Atteint http://fr.archive.ubuntu.com trusty/multiverse amd64 Packages
Atteint http://ppa.launchpad.net trusty/main amd64 Packages
Atteint http://ppa.launchpad.net trusty/main i386 Packages
Atteint http://fr.archive.ubuntu.com trusty/main i386 Packages
Atteint http://fr.archive.ubuntu.com trusty/restricted i386 Packages
Atteint http://fr.archive.ubuntu.com trusty/universe i386 Packages
Atteint http://fr.archive.ubuntu.com trusty/multiverse i386 Packages
Atteint http://ppa.launchpad.net trusty/main amd64 Packages
Atteint http://ppa.launchpad.net trusty/main i386 Packages
Atteint http://fr.archive.ubuntu.com trusty/main Translation-fr
Atteint http://ppa.launchpad.net trusty/main amd64 Packages
Atteint http://ppa.launchpad.net trusty/main i386 Packages
Atteint http://ppa.launchpad.net trusty/main Translation-en
Atteint http://ppa.launchpad.net trusty/main amd64 Packages
Atteint http://ppa.launchpad.net trusty/main i386 Packages
Atteint http://fr.archive.ubuntu.com trusty/main Translation-en_GB
Atteint http://ppa.launchpad.net trusty/main Translation-en
Atteint http://ppa.launchpad.net trusty/main amd64 Packages
Atteint http://fr.archive.ubuntu.com trusty/main Translation-en
Atteint http://ppa.launchpad.net trusty/main i386 Packages
Atteint http://ppa.launchpad.net trusty/main Translation-en
Atteint http://ppa.launchpad.net trusty/main amd64 Packages
Atteint http://ppa.launchpad.net trusty/main i386 Packages
Atteint http://fr.archive.ubuntu.com trusty/multiverse Translation-fr
Atteint http://fr.archive.ubuntu.com trusty/multiverse Translation-en_GB
Atteint http://fr.archive.ubuntu.com trusty/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com trusty/restricted Translation-fr
Atteint http://fr.archive.ubuntu.com trusty/restricted Translation-en_GB
Atteint http://fr.archive.ubuntu.com trusty/restricted Translation-en
Atteint http://fr.archive.ubuntu.com trusty/universe Translation-fr
Atteint http://fr.archive.ubuntu.com trusty/universe Translation-en_GB
Atteint http://fr.archive.ubuntu.com trusty/universe Translation-en
Atteint http://fr.archive.ubuntu.com trusty-updates/main amd64 Packages
Atteint http://fr.archive.ubuntu.com trusty-updates/restricted amd64 Packages
Atteint http://fr.archive.ubuntu.com trusty-updates/universe amd64 Packages
Atteint http://fr.archive.ubuntu.com trusty-updates/multiverse amd64 Packages
Atteint http://fr.archive.ubuntu.com trusty-updates/main i386 Packages
Atteint http://fr.archive.ubuntu.com trusty-updates/restricted i386 Packages
Atteint http://fr.archive.ubuntu.com trusty-updates/universe i386 Packages
Atteint http://fr.archive.ubuntu.com trusty-updates/multiverse i386 Packages
Atteint http://fr.archive.ubuntu.com trusty-updates/main Translation-en
Atteint http://fr.archive.ubuntu.com trusty-updates/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com trusty-updates/restricted Translation-en
Ignoré http://ppa.launchpad.net trusty/main Translation-fr_FR
Ignoré http://ppa.launchpad.net trusty/main Translation-fr
Atteint http://fr.archive.ubuntu.com trusty-updates/universe Translation-en
Ignoré http://ppa.launchpad.net trusty/main Translation-en_GB
Ignoré http://ppa.launchpad.net trusty/main Translation-fr_FR
Ignoré http://ppa.launchpad.net trusty/main Translation-fr
Atteint http://fr.archive.ubuntu.com trusty-backports/main amd64 Packages
Ignoré http://ppa.launchpad.net trusty/main Translation-en_GB
Ignoré http://ppa.launchpad.net trusty/main Translation-en
Ignoré http://ppa.launchpad.net trusty/main Translation-fr_FR
Atteint http://fr.archive.ubuntu.com trusty-backports/restricted amd64 Packages
Ignoré http://ppa.launchpad.net trusty/main Translation-fr
Ignoré http://ppa.launchpad.net trusty/main Translation-en_GB
Ignoré http://ppa.launchpad.net trusty/main Translation-en
Atteint http://fr.archive.ubuntu.com trusty-backports/universe amd64 Packages
Erreur http://ppa.launchpad.net trusty/main amd64 Packages
404 Not Found
Erreur http://ppa.launchpad.net trusty/main i386 Packages
404 Not Found
Ignoré http://ppa.launchpad.net trusty/main Translation-fr_FR
Atteint http://fr.archive.ubuntu.com trusty-backports/multiverse amd64 Packages
Ignoré http://ppa.launchpad.net trusty/main Translation-fr
Ignoré http://ppa.launchpad.net trusty/main Translation-en_GB
Ignoré http://ppa.launchpad.net trusty/main Translation-en
Atteint http://fr.archive.ubuntu.com trusty-backports/main i386 Packages
Ignoré http://ppa.launchpad.net trusty/main Translation-fr_FR
Atteint http://fr.archive.ubuntu.com trusty-backports/restricted i386 Packages
Ignoré http://ppa.launchpad.net trusty/main Translation-fr
Ignoré http://ppa.launchpad.net trusty/main Translation-en_GB
Ignoré http://ppa.launchpad.net trusty/main Translation-en
Atteint http://fr.archive.ubuntu.com trusty-backports/universe i386 Packages
Atteint http://fr.archive.ubuntu.com trusty-backports/multiverse i386 Packages
Atteint http://fr.archive.ubuntu.com trusty-backports/main Translation-en
Atteint http://fr.archive.ubuntu.com trusty-backports/multiverse Translation-en
Atteint http://fr.archive.ubuntu.com trusty-backports/restricted Translation-en
Atteint http://fr.archive.ubuntu.com trusty-backports/universe Translation-en
Ignoré http://fr.archive.ubuntu.com trusty/main Translation-fr_FR
Ignoré http://fr.archive.ubuntu.com trusty/multiverse Translation-fr_FR
Ignoré http://fr.archive.ubuntu.com trusty/restricted Translation-fr_FR
Ignoré http://fr.archive.ubuntu.com trusty/universe Translation-fr_FR
316 o téléchargés en 9s (34 o/s)
W: Erreur de GPG : http://ppa.launchpad.net trusty Release : Les signatures suivantes n'ont pas pu être vérifiées car la clé publique n'est pas disponible : NO_PUBKEY B70D6F7664B6EE15
W: impossible de récupérer http://ppa.launchpad.net/manatlan/ppa/ubuntu/dists/trusty/main/binary-amd64/Packages : 404 Not Found
W: impossible de récupérer http://ppa.launchpad.net/manatlan/ppa/ubuntu/dists/trusty/main/binary-i386/Packages : 404 Not Found
E: Échec du téléchargement pour certains fichiers d'index. Soit ils ont été ignorés, soit les anciens fichiers ont été utilisés à la place.
E: Impossible de reconstruire le cache des paquets
jean8v32@jean8v32-pc:~$ sudo aptitude upgrade
Il y'a eu quelques erreurs (Unknown media type in type ...). Je ne sais pas si ça peut-ête la source de cette lenteur.
jean8v32@jean8v32-pc:~$ sudo aptitude upgrade
Les paquets suivants seront mis à jour :
gdm gir1.2-gdm-1.0 libgdm1 libpoppler-glib8 libpoppler-qt4-4 libpoppler44 poppler-utils
python-cupshelpers python3-software-properties rsyslog sa-compile software-properties-common
software-properties-gtk spamassassin spamc system-config-printer-common system-config-printer-gnome
system-config-printer-udev
18 paquets mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de télécharger 3 442 ko d'archives. Après dépaquetage, 4 096 o seront utilisés.
Voulez-vous continuer ? [Y/n/?] y
Prendre : 1 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/universe libgdm1 amd64 3.10.0.1-0ubuntu3.1 [54,9 kB]
Prendre : 2 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/universe gdm amd64 3.10.0.1-0ubuntu3.1 [613 kB]
Prendre : 3 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/universe gir1.2-gdm-1.0 amd64 3.10.0.1-0ubuntu3.1 [8 526 B]
Prendre : 4 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main libpoppler44 amd64 0.24.5-2ubuntu4.2 [703 kB]
Prendre : 5 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main libpoppler-glib8 amd64 0.24.5-2ubuntu4.2 [83,3 kB]
Prendre : 6 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main libpoppler-qt4-4 amd64 0.24.5-2ubuntu4.2 [107 kB]
Prendre : 7 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main rsyslog amd64 7.4.4-1ubuntu2.5 [355 kB]
Prendre : 8 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main poppler-utils amd64 0.24.5-2ubuntu4.2 [118 kB]
Prendre : 9 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main python-cupshelpers all 1.4.3+20140219-0ubuntu2.5 [31,6 kB]
Prendre : 10 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main software-properties-common all 0.92.37.3 [9 376 B]
Prendre : 11 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main software-properties-gtk all 0.92.37.3 [46,9 kB]
Prendre : 12 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main python3-software-properties all 0.92.37.3 [19,1 kB]
Prendre : 13 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main spamassassin all 3.4.0-1ubuntu2.1 [1 034 kB]
Prendre : 14 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main sa-compile all 3.4.0-1ubuntu2.1 [13,8 kB]
Prendre : 15 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main spamc amd64 3.4.0-1ubuntu2.1 [51,8 kB]
Prendre : 16 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main system-config-printer-common all 1.4.3+20140219-0ubuntu2.5 [36,5 kB]
Prendre : 17 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main system-config-printer-gnome all 1.4.3+20140219-0ubuntu2.5 [137 kB]
Prendre : 18 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main system-config-printer-udev amd64 1.4.3+20140219-0ubuntu2.5 [18,4 kB]
3 442 ko téléchargés en 6s (529 ko/s)
Préconfiguration des paquets...
(Lecture de la base de données... 596468 fichiers et répertoires déjà installés.)
Préparation du décompactage de .../libgdm1_3.10.0.1-0ubuntu3.1_amd64.deb ...
Décompactage de libgdm1 (3.10.0.1-0ubuntu3.1) sur (3.10.0.1-0ubuntu3) ...
Préparation du décompactage de .../gdm_3.10.0.1-0ubuntu3.1_amd64.deb ...
Décompactage de gdm (3.10.0.1-0ubuntu3.1) sur (3.10.0.1-0ubuntu3) ...
Préparation du décompactage de .../gir1.2-gdm-1.0_3.10.0.1-0ubuntu3.1_amd64.deb ...
Décompactage de gir1.2-gdm-1.0 (3.10.0.1-0ubuntu3.1) sur (3.10.0.1-0ubuntu3) ...
Préparation du décompactage de .../libpoppler44_0.24.5-2ubuntu4.2_amd64.deb ...
Décompactage de libpoppler44:amd64 (0.24.5-2ubuntu4.2) sur (0.24.5-2ubuntu4.1) ...
Préparation du décompactage de .../libpoppler-glib8_0.24.5-2ubuntu4.2_amd64.deb ...
Décompactage de libpoppler-glib8:amd64 (0.24.5-2ubuntu4.2) sur (0.24.5-2ubuntu4.1) ...
Préparation du décompactage de .../libpoppler-qt4-4_0.24.5-2ubuntu4.2_amd64.deb ...
Décompactage de libpoppler-qt4-4:amd64 (0.24.5-2ubuntu4.2) sur (0.24.5-2ubuntu4.1) ...
Préparation du décompactage de .../rsyslog_7.4.4-1ubuntu2.5_amd64.deb ...
Décompactage de rsyslog (7.4.4-1ubuntu2.5) sur (7.4.4-1ubuntu2.3) ...
Préparation du décompactage de .../poppler-utils_0.24.5-2ubuntu4.2_amd64.deb ...
Décompactage de poppler-utils (0.24.5-2ubuntu4.2) sur (0.24.5-2ubuntu4.1) ...
Préparation du décompactage de .../python-cupshelpers_1.4.3+20140219-0ubuntu2.5_all.deb ...
Décompactage de python-cupshelpers (1.4.3+20140219-0ubuntu2.5) sur (1.4.3+20140219-0ubuntu2.2) ...
Préparation du décompactage de .../software-properties-common_0.92.37.3_all.deb ...
Décompactage de software-properties-common (0.92.37.3) sur (0.92.37.2) ...
Préparation du décompactage de .../software-properties-gtk_0.92.37.3_all.deb ...
Décompactage de software-properties-gtk (0.92.37.3) sur (0.92.37.2) ...
Préparation du décompactage de .../python3-software-properties_0.92.37.3_all.deb ...
Décompactage de python3-software-properties (0.92.37.3) sur (0.92.37.2) ...
Préparation du décompactage de .../spamassassin_3.4.0-1ubuntu2.1_all.deb ...
Stopping SpamAssassin Mail Filter Daemon: No /usr/bin/perl found running; none killed.
spamd.
Décompactage de spamassassin (3.4.0-1ubuntu2.1) sur (3.4.0-1ubuntu2) ...
Préparation du décompactage de .../sa-compile_3.4.0-1ubuntu2.1_all.deb ...
Décompactage de sa-compile (3.4.0-1ubuntu2.1) sur (3.4.0-1ubuntu2) ...
Préparation du décompactage de .../spamc_3.4.0-1ubuntu2.1_amd64.deb ...
Décompactage de spamc (3.4.0-1ubuntu2.1) sur (3.4.0-1ubuntu2) ...
Préparation du décompactage de .../system-config-printer-common_1.4.3+20140219-0ubuntu2.5_all.deb ...
Décompactage de system-config-printer-common (1.4.3+20140219-0ubuntu2.5) sur (1.4.3+20140219-0ubuntu2.2) ...
Préparation du décompactage de .../system-config-printer-gnome_1.4.3+20140219-0ubuntu2.5_all.deb ...
Décompactage de system-config-printer-gnome (1.4.3+20140219-0ubuntu2.5) sur (1.4.3+20140219-0ubuntu2.2) ...
Préparation du décompactage de .../system-config-printer-udev_1.4.3+20140219-0ubuntu2.5_amd64.deb ...
Décompactage de system-config-printer-udev (1.4.3+20140219-0ubuntu2.5) sur (1.4.3+20140219-0ubuntu2.2) ...
Traitement déclenché pour libglib2.0-0:amd64 (2.40.2-0ubuntu1) ...
Traitement déclenché pour libglib2.0-0:i386 (2.40.2-0ubuntu1) ...
Traitement déclenché pour man-db (2.6.7.1-1ubuntu1) ...
Traitement déclenché pour ureadahead (0.100.0-16) ...
ureadahead will be reprofiled on next reboot
Traitement déclenché pour hicolor-icon-theme (0.13-1) ...
Traitement déclenché pour mime-support (3.54ubuntu1.1) ...
Traitement déclenché pour bamfdaemon (0.5.1+14.04.20140409-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Traitement déclenché pour gnome-menus (3.10.1-0ubuntu2) ...
Traitement déclenché pour desktop-file-utils (0.22-1ubuntu1) ...
Traitement déclenché pour shared-mime-info (1.2-0ubuntu3) ...
Unknown media type in type 'all/all'
Unknown media type in type 'all/allfiles'
Unknown media type in type 'uri/mms'
Unknown media type in type 'uri/mmst'
Unknown media type in type 'uri/mmsu'
Unknown media type in type 'uri/pnm'
Unknown media type in type 'uri/rtspt'
Unknown media type in type 'uri/rtspu'
Paramétrage de libgdm1 (3.10.0.1-0ubuntu3.1) ...
Paramétrage de gir1.2-gdm-1.0 (3.10.0.1-0ubuntu3.1) ...
Paramétrage de gdm (3.10.0.1-0ubuntu3.1) ...
Installation de la nouvelle version du fichier de configuration /etc/gdm/Xsession ...
Paramétrage de libpoppler44:amd64 (0.24.5-2ubuntu4.2) ...
Paramétrage de libpoppler-glib8:amd64 (0.24.5-2ubuntu4.2) ...
Paramétrage de libpoppler-qt4-4:amd64 (0.24.5-2ubuntu4.2) ...
Paramétrage de rsyslog (7.4.4-1ubuntu2.5) ...
L'utilisateur « syslog » appartient déjà au groupe « adm ».
Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
rsyslog stop/waiting
rsyslog start/running, process 19196
Paramétrage de poppler-utils (0.24.5-2ubuntu4.2) ...
Paramétrage de python-cupshelpers (1.4.3+20140219-0ubuntu2.5) ...
Paramétrage de python3-software-properties (0.92.37.3) ...
Paramétrage de software-properties-common (0.92.37.3) ...
Paramétrage de software-properties-gtk (0.92.37.3) ...
Paramétrage de spamassassin (3.4.0-1ubuntu2.1) ...
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
Paramétrage de sa-compile (3.4.0-1ubuntu2.1) ...
Running sa-compile (may take a long time)
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
Paramétrage de spamc (3.4.0-1ubuntu2.1) ...
Paramétrage de system-config-printer-common (1.4.3+20140219-0ubuntu2.5) ...
Paramétrage de system-config-printer-gnome (1.4.3+20140219-0ubuntu2.5) ...
Paramétrage de system-config-printer-udev (1.4.3+20140219-0ubuntu2.5) ...
Traitement déclenché pour libc-bin (2.19-0ubuntu6.5) ...
État actuel : 0 mise à jour restante [-18].
jean8v32@jean8v32-pc:~$ Je redemarre pour donner la commande : sudo lshw|grep -iC 10 usb@8:2
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#48 Le 30/01/2015, à 09:45
- ngmsky
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Après redemarrage, je suis toujours à 106 secondes.
et voici le
jean8v32@jean8v32-pc:~$ sudo lshw|grep -iC 10 usb@8:2
[sudo] password for jean8v32:
jean8v32@jean8v32-pc:~$ sudo lshw|grep -iC 10 usb@8:2
jean8v32@jean8v32-pc:~$ je l'ai refait pour être vraiment sûr qu'il n'y a rien rien en sortie.
Et puis, encore un dmesg :
[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-43-generic (buildd@tipua) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #72-Ubuntu SMP Mon Dec 8 19:35:06 UTC 2014 (Ubuntu 3.13.0-43.72-generic 3.13.11.11)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic root=UUID=5ccb7f75-6b15-4dd9-bee2-c9334c1f650d ro splash quiet usbcore.old_scheme_first=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf78dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf78e000-0x00000000bf7cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ec000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: /PURE BLACK X58, BIOS 080016 09/28/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-E7FFF write-through
[ 0.000000] E8000-EBFFF write-protect
[ 0.000000] EC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 8184M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 1GB, type WB
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34c08000-0x365fbfff]
[ 0.000000] ACPI: RSDP 00000000000fa140 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 000054 (v01 092811 XSDT1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v04 092811 FACP1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf780480 005D0F (v02 1AEGH 1AEGHA52 00000A52 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf78e000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000AC (v02 092811 APIC1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780440 00003C (v01 092811 OEMMCFG 20110928 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf78e040 000082 (v01 092811 OEMB1359 20110928 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf78e0d0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf790ce0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
[ 0.000000] NODE_DATA [mem 0x23fff6000-0x23fffafff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x23fffffff]
[ 0.000000] On node 0 totalpages: 2094876
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12190 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 20480 pages used for memmap
[ 0.000000] Normal zone: 1310720 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 12 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf78dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf78e000-0xbf7cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7d0000-0xbf7dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7e0000-0xbf7ebfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7ec000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s82304 r8192 d24192 u131072
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062121
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic root=UUID=5ccb7f75-6b15-4dd9-bee2-c9334c1f650d ro splash quiet usbcore.old_scheme_first=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8137804K/8379504K available (7383K kernel code, 1144K rwdata, 3408K rodata, 1336K init, 1444K bss, 241700K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-11.
[ 0.000000] NR_IRQS:16640 nr_irqs:776 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3219.850 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6439.70 BogoMIPS (lpj=12879400)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000032] Security Framework initialized
[ 0.000051] AppArmor: AppArmor initialized
[ 0.000052] Yama: becoming mindful.
[ 0.000587] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002032] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002655] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002665] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002859] Initializing cgroup subsys memory
[ 0.002864] Initializing cgroup subsys devices
[ 0.002866] Initializing cgroup subsys freezer
[ 0.002867] Initializing cgroup subsys blkio
[ 0.002869] Initializing cgroup subsys perf_event
[ 0.002871] Initializing cgroup subsys hugetlb
[ 0.002888] CPU: Physical Processor ID: 0
[ 0.002889] CPU: Processor Core ID: 0
[ 0.002893] mce: CPU supports 9 MCE banks
[ 0.002904] CPU0: Thermal monitoring enabled (TM1)
[ 0.002914] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.002914] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002914] tlb_flushall_shift: 6
[ 0.003001] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.004061] ACPI: Core revision 20131115
[ 0.006531] ACPI: All ACPI Tables successfully acquired
[ 0.028805] ftrace: allocating 28552 entries in 112 pages
[ 0.060648] dmar: Host address width 39
[ 0.060649] dmar: DRHD base: 0x000000fbfff000 flags: 0x0
[ 0.060657] dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f020fa
[ 0.060658] dmar: DRHD base: 0x000000fbffe000 flags: 0x1
[ 0.060664] dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c9078010ef0462 ecap f020fe
[ 0.060665] dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
[ 0.060666] dmar: RMRR base: 0x000000bf7ec000 end: 0x000000bf7fffff
[ 0.060667] dmar: ATSR flags: 0x0
[ 0.060735] This system BIOS has enabled interrupt remapping
[ 0.060735] on a chipset that contains an erratum making that
[ 0.060735] feature unstable. To maintain system stability
[ 0.060735] interrupt remapping is being disabled. Please
[ 0.060735] contact your BIOS vendor for an update
[ 0.060770] Switched APIC routing to physical flat.
[ 0.061184] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.100864] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz (fam: 06, model: 1a, stepping: 05)
[ 0.206299] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.206303] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.206305] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.206307] ... version: 3
[ 0.206308] ... bit width: 48
[ 0.206309] ... generic registers: 4
[ 0.206310] ... value mask: 0000ffffffffffff
[ 0.206311] ... max period: 000000007fffffff
[ 0.206311] ... fixed-purpose events: 3
[ 0.206312] ... event mask: 000000070000000f
[ 0.207853] x86: Booting SMP configuration:
[ 0.218403] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.221097] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.231678] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.244881] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.207854] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.301198] x86: Booted up 1 node, 8 CPUs
[ 0.301201] smpboot: Total of 8 processors activated (51517.60 BogoMIPS)
[ 0.305623] devtmpfs: initialized
[ 0.307584] EVM: security.selinux
[ 0.307585] EVM: security.SMACK64
[ 0.307586] EVM: security.ima
[ 0.307586] EVM: security.capability
[ 0.307620] PM: Registering ACPI NVS region [mem 0xbf78e000-0xbf7cffff] (270336 bytes)
[ 0.308326] pinctrl core: initialized pinctrl subsystem
[ 0.308371] regulator-dummy: no parameters
[ 0.308400] RTC time: 8:38:54, date: 01/30/15
[ 0.308426] NET: Registered protocol family 16
[ 0.308503] cpuidle: using governor ladder
[ 0.308505] cpuidle: using governor menu
[ 0.308533] ACPI: bus type PCI registered
[ 0.308535] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.308585] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.308587] PCI: not using MMCONFIG
[ 0.308588] PCI: Using configuration type 1 for base access
[ 0.309314] bio: create slab <bio-0> at 0
[ 0.309430] ACPI: Added _OSI(Module Device)
[ 0.309431] ACPI: Added _OSI(Processor Device)
[ 0.309432] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.309433] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.310715] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.314374] ACPI: SSDT 00000000bf78e210 00244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.314582] ACPI: Dynamic OEM Table Load:
[ 0.314584] ACPI: SSDT (null) 00244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.314647] ACPI: SSDT 00000000bf790660 000678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.314804] ACPI: Dynamic OEM Table Load:
[ 0.314805] ACPI: SSDT (null) 000678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.315046] ACPI: Interpreter enabled
[ 0.315052] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.315061] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.315062] ACPI: Using IOAPIC for interrupt routing
[ 0.315079] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.315909] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.326859] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.326930] ACPI: No dock devices found.
[ 0.331873] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.331878] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.332051] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.332389] PCI host bridge to bus 0000:00
[ 0.332391] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.332392] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.332394] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.332395] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.332396] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.332398] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.332399] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.332409] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.332454] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.332514] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.332563] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.332602] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.332625] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.332673] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.332711] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.332734] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.332782] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.332821] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.332850] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.332895] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.332933] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.332961] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[ 0.333005] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.333044] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.333079] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.333164] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.333247] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.333327] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.333415] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.333456] pci 0000:00:1a.0: reg 0x20: [io 0x8080-0x809f]
[ 0.333543] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.333576] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.333619] pci 0000:00:1a.1: reg 0x20: [io 0x8400-0x841f]
[ 0.333706] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.333737] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.333778] pci 0000:00:1a.2: reg 0x20: [io 0x8480-0x849f]
[ 0.333864] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.333903] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.333926] pci 0000:00:1a.7: reg 0x10: [mem 0xfbaf6000-0xfbaf63ff]
[ 0.334014] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.334058] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.334093] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.334110] pci 0000:00:1b.0: reg 0x10: [mem 0xfbaf8000-0xfbafbfff 64bit]
[ 0.334172] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.334238] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.334309] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.334355] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.334389] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.334457] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.334502] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.334534] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.334576] pci 0000:00:1d.0: reg 0x20: [io 0x8800-0x881f]
[ 0.334662] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.334693] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.334735] pci 0000:00:1d.1: reg 0x20: [io 0x8880-0x889f]
[ 0.334821] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.334852] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.334893] pci 0000:00:1d.2: reg 0x20: [io 0x8c00-0x8c1f]
[ 0.334979] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.335018] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.335040] pci 0000:00:1d.7: reg 0x10: [mem 0xfbafc000-0xfbafc3ff]
[ 0.335128] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.335172] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.335200] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.335277] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.335305] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.335389] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.335398] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.335406] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.335408] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.335505] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a
[ 0.335522] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.335533] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.335543] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.335554] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.335565] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f]
[ 0.335575] pci 0000:00:1f.2: reg 0x24: [io 0xffa0-0xffaf]
[ 0.335669] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.335686] pci 0000:00:1f.3: reg 0x10: [mem 0xfbafe000-0xfbafe0ff 64bit]
[ 0.335708] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.335786] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
[ 0.335803] pci 0000:00:1f.5: reg 0x10: [io 0x9c00-0x9c07]
[ 0.335814] pci 0000:00:1f.5: reg 0x14: [io 0x9880-0x9883]
[ 0.335825] pci 0000:00:1f.5: reg 0x18: [io 0x9800-0x9807]
[ 0.335835] pci 0000:00:1f.5: reg 0x1c: [io 0x9480-0x9483]
[ 0.335846] pci 0000:00:1f.5: reg 0x20: [io 0x9400-0x940f]
[ 0.335856] pci 0000:00:1f.5: reg 0x24: [io 0x9080-0x908f]
[ 0.335984] pci 0000:08:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.335994] pci 0000:08:00.0: reg 0x10: [io 0xd880-0xd887]
[ 0.336000] pci 0000:08:00.0: reg 0x14: [io 0xd800-0xd803]
[ 0.336006] pci 0000:08:00.0: reg 0x18: [io 0xe080-0xe087]
[ 0.336012] pci 0000:08:00.0: reg 0x1c: [io 0xe000-0xe003]
[ 0.336019] pci 0000:08:00.0: reg 0x20: [io 0xdc00-0xdc0f]
[ 0.336025] pci 0000:08:00.0: reg 0x24: [mem 0xfbeef000-0xfbeef7ff]
[ 0.336032] pci 0000:08:00.0: reg 0x30: [mem 0xfbed0000-0xfbedffff pref]
[ 0.336060] pci 0000:08:00.0: PME# supported from D3hot
[ 0.336096] pci 0000:08:00.1: [1b4b:91a4] type 00 class 0x01018f
[ 0.336105] pci 0000:08:00.1: reg 0x10: [io 0xe480-0xe487]
[ 0.336112] pci 0000:08:00.1: reg 0x14: [io 0xe400-0xe403]
[ 0.336118] pci 0000:08:00.1: reg 0x18: [io 0xec00-0xec07]
[ 0.336124] pci 0000:08:00.1: reg 0x1c: [io 0xe880-0xe883]
[ 0.336130] pci 0000:08:00.1: reg 0x20: [io 0xe800-0xe80f]
[ 0.336137] pci 0000:08:00.1: reg 0x24: [mem 0xfbeefc00-0xfbeefc0f]
[ 0.336143] pci 0000:08:00.1: reg 0x30: [mem 0xfbef0000-0xfbefffff pref]
[ 0.336172] pci 0000:08:00.1: PME# supported from D3hot
[ 0.342304] pci 0000:00:01.0: PCI bridge to [bus 08]
[ 0.342308] pci 0000:00:01.0: bridge window [io 0xd000-0xefff]
[ 0.342312] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.342386] pci 0000:07:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.342400] pci 0000:07:00.0: reg 0x10: [mem 0xfbdfe000-0xfbdfffff 64bit]
[ 0.342471] pci 0000:07:00.0: PME# supported from D0 D3hot
[ 0.350307] pci 0000:00:02.0: PCI bridge to [bus 07]
[ 0.350313] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.350380] pci 0000:06:00.0: [1002:5b62] type 00 class 0x030000
[ 0.350388] pci 0000:06:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.350395] pci 0000:06:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.350401] pci 0000:06:00.0: reg 0x18: [mem 0xd8000000-0xd800ffff]
[ 0.350421] pci 0000:06:00.0: reg 0x30: [mem 0xd7fe0000-0xd7ffffff pref]
[ 0.350449] pci 0000:06:00.0: supports D1 D2
[ 0.350480] pci 0000:06:00.1: [1002:5b72] type 00 class 0x038000
[ 0.350488] pci 0000:06:00.1: reg 0x10: [mem 0xdc000000-0xdc00ffff]
[ 0.350539] pci 0000:06:00.1: supports D1 D2
[ 0.350562] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.350568] pci 0000:00:03.0: PCI bridge to [bus 06]
[ 0.350571] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.350573] pci 0000:00:03.0: bridge window [mem 0xd7f00000-0xdfffffff]
[ 0.350577] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.350609] pci 0000:00:07.0: PCI bridge to [bus 05]
[ 0.350648] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.350703] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.350991] pci 0000:02:00.0: [11ab:4380] type 00 class 0x020000
[ 0.351292] pci 0000:02:00.0: reg 0x10: [mem 0xfbcdc000-0xfbcdffff 64bit]
[ 0.351441] pci 0000:02:00.0: reg 0x18: [io 0xb800-0xb8ff]
[ 0.351970] pci 0000:02:00.0: reg 0x30: [mem 0xfbce0000-0xfbcfffff pref]
[ 0.352711] pci 0000:02:00.0: supports D1 D2
[ 0.352712] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.353184] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.353191] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.353198] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.353242] pci 0000:01:00.0: [13f6:0111] type 00 class 0x040100
[ 0.353262] pci 0000:01:00.0: reg 0x10: [io 0xa800-0xa8ff]
[ 0.353335] pci 0000:01:00.0: supports D1 D2
[ 0.353374] pci 0000:01:03.0: [104c:8023] type 00 class 0x0c0010
[ 0.353393] pci 0000:01:03.0: reg 0x10: [mem 0xfbbfb800-0xfbbfbfff]
[ 0.353406] pci 0000:01:03.0: reg 0x14: [mem 0xfbbfc000-0xfbbfffff]
[ 0.353472] pci 0000:01:03.0: supports D1 D2
[ 0.353473] pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.353534] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.353541] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.353548] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.353556] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.353558] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.353559] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.353560] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.353562] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.353563] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.354134] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.354184] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.354235] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.354288] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.354340] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.354394] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.354442] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.354495] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.354574] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.354579] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.354601] Found 1 acpi root devices
[ 0.354660] vgaarb: setting as boot device: PCI:0000:06:00.0
[ 0.354661] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.354662] vgaarb: loaded
[ 0.354663] vgaarb: bridge control possible 0000:06:00.0
[ 0.354771] SCSI subsystem initialized
[ 0.354798] libata version 3.00 loaded.
[ 0.354811] ACPI: bus type USB registered
[ 0.354820] usbcore: registered new interface driver usbfs
[ 0.354826] usbcore: registered new interface driver hub
[ 0.354838] usbcore: registered new device driver usb
[ 0.354910] PCI: Using ACPI for IRQ routing
[ 0.360309] PCI: Discovered peer bus ff
[ 0.360310] PCI: root bus ff: using default resources
[ 0.360311] PCI: Probing PCI hardware (bus ff)
[ 0.360328] PCI host bridge to bus 0000:ff
[ 0.360330] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.360331] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.360332] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.360336] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.360362] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.360389] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.360412] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.360437] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.360460] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.360484] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.360508] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.360531] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.360555] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.360578] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.360602] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.360625] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.360649] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.360674] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.360698] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.360722] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.360745] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.360771] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.360803] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.360806] PCI: pci_cache_line_size set to 64 bytes
[ 0.360930] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.360932] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.360985] NetLabel: Initializing
[ 0.360986] NetLabel: domain hash size = 128
[ 0.360987] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.360997] NetLabel: unlabeled traffic allowed by default
[ 0.361113] hpet clockevent registered
[ 0.361120] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.361128] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.361131] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.364334] Switched to clocksource hpet
[ 0.367679] AppArmor: AppArmor Filesystem Enabled
[ 0.367697] pnp: PnP ACPI init
[ 0.367706] ACPI: bus type PNP registered
[ 0.367752] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
[ 0.367754] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.367755] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.367757] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.367759] system 00:00: [mem 0xfec8a000-0xfec8afff] has been reserved
[ 0.367760] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.367762] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.367791] pnp 00:01: [dma 4]
[ 0.367804] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.367830] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.367869] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.367892] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.368250] system 00:05: [io 0x0a00-0x0adf] has been reserved
[ 0.368252] system 00:05: [io 0x0ae0-0x0aef] has been reserved
[ 0.368253] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.368379] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.368382] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.368383] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.368385] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.368387] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.368388] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.368390] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.368453] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.368502] system 00:08: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.368504] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.368575] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.368577] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.368579] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.368624] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.368626] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.368748] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.368750] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.368752] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.368754] system 00:0b: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.368755] system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.368757] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.368867] pnp: PnP ACPI: found 12 devices
[ 0.368868] ACPI: bus type PNP unregistered
[ 0.375296] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.375298] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.375301] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.375312] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.375327] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.375329] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.375331] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.375332] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.375334] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.375336] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
[ 0.375338] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.375340] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.375342] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.375344] pci 0000:00:01.0: PCI bridge to [bus 08]
[ 0.375346] pci 0000:00:01.0: bridge window [io 0xd000-0xefff]
[ 0.375349] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.375354] pci 0000:00:02.0: PCI bridge to [bus 07]
[ 0.375357] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.375362] pci 0000:00:03.0: PCI bridge to [bus 06]
[ 0.375364] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.375367] pci 0000:00:03.0: bridge window [mem 0xd7f00000-0xdfffffff]
[ 0.375370] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.375373] pci 0000:00:07.0: PCI bridge to [bus 05]
[ 0.375381] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.375387] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.375394] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.375401] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.375408] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.375417] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.375423] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.375430] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.375437] pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.375446] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.375452] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.375459] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.375466] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.375467] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.375468] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.375469] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.375471] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.375472] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.375473] pci_bus 0000:08: resource 0 [io 0xd000-0xefff]
[ 0.375475] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.375476] pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.375477] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.375478] pci_bus 0000:06: resource 1 [mem 0xd7f00000-0xdfffffff]
[ 0.375480] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.375481] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.375482] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd01fffff]
[ 0.375484] pci_bus 0000:03: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
[ 0.375485] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.375486] pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.375488] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.375489] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.375490] pci_bus 0000:01: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.375491] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.375493] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.375494] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.375495] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.375496] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.375498] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.375500] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.375501] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.375522] NET: Registered protocol family 2
[ 0.375676] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.375809] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.375939] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.375955] TCP: reno registered
[ 0.375963] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.375989] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.376046] NET: Registered protocol family 1
[ 0.377505] pci 0000:06:00.0: Video device with shadowed ROM
[ 0.377556] PCI: CLS 256 bytes, default 64
[ 0.377588] Trying to unpack rootfs image as initramfs...
[ 0.715336] Freeing initrd memory: 26576K (ffff880034c08000 - ffff8800365fc000)
[ 0.715348] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.715350] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.715622] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
[ 0.715630] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
[ 0.715638] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
[ 0.715646] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
[ 0.715654] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
[ 0.715662] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
[ 0.715669] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
[ 0.715676] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
[ 0.715721] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.715722] Scanning for low memory corruption every 60 seconds
[ 0.715984] Initialise system trusted keyring
[ 0.716023] audit: initializing netlink socket (disabled)
[ 0.716031] type=2000 audit(1422607134.572:1): initialized
[ 0.735301] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.736120] zbud: loaded
[ 0.736241] VFS: Disk quotas dquot_6.5.2
[ 0.736273] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.736625] fuse init (API version 7.22)
[ 0.736684] msgmni has been set to 15946
[ 0.736723] Key type big_key registered
[ 0.737299] Key type asymmetric registered
[ 0.737300] Asymmetric key parser 'x509' registered
[ 0.737321] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.737369] io scheduler noop registered
[ 0.737370] io scheduler deadline registered (default)
[ 0.737387] io scheduler cfq registered
[ 0.737484] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.737543] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
[ 0.737600] pcieport 0000:00:03.0: irq 42 for MSI/MSI-X
[ 0.737658] pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
[ 0.737714] pcieport 0000:00:09.0: irq 44 for MSI/MSI-X
[ 0.737760] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.737899] pcieport 0000:00:1c.0: irq 45 for MSI/MSI-X
[ 0.738059] pcieport 0000:00:1c.4: irq 46 for MSI/MSI-X
[ 0.738144] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 0.738163] aer 0000:00:02.0:pcie02: service driver aer loaded
[ 0.738181] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 0.738199] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 0.738218] aer 0000:00:09.0:pcie02: service driver aer loaded
[ 0.738226] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.738228] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 0.738229] pci 0000:08:00.1: Signaling PME through PCIe PME interrupt
[ 0.738232] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.738237] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 0.738238] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 0.738241] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 0.738246] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 0.738248] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.738249] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 0.738251] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 0.738257] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.738259] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.738265] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 0.738267] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 0.738288] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.738295] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.738311] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.738313] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.738320] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.738329] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.738362] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 3a40 ss_vid 174b ss_did 1000
[ 0.738390] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.738403] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3a48 ss_vid 174b ss_did 1000
[ 0.738426] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[ 0.738429] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.738460] intel_idle: MWAIT substates: 0x1120
[ 0.738472] intel_idle: v0.4 model 0x1A
[ 0.738473] intel_idle: lapic_timer_reliable_states 0x2
[ 0.738643] ipmi message handler version 39.2
[ 0.738689] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.738692] ACPI: Power Button [PWRB]
[ 0.738713] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.738715] ACPI: Power Button [PWRF]
[ 0.739095] ACPI: Invalid active0 threshold
[ 0.739297] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.739298] ACPI: Thermal Zone [THRM] (22 C)
[ 0.739312] GHES: HEST is not enabled!
[ 0.739372] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.740514] Linux agpgart interface v0.103
[ 0.741529] brd: module loaded
[ 0.742069] loop: module loaded
[ 0.742147] ata_piix 0000:00:1f.2: version 2.13
[ 0.742237] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.742979] scsi0 : ata_piix
[ 0.743048] scsi1 : ata_piix
[ 0.743073] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 0.743081] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 0.743173] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.743810] scsi2 : ata_piix
[ 0.743907] scsi3 : ata_piix
[ 0.743928] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19
[ 0.743935] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19
[ 0.744107] libphy: Fixed MDIO Bus: probed
[ 0.744161] tun: Universal TUN/TAP device driver, 1.6
[ 0.744162] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.744196] PPP generic driver version 2.4.2
[ 0.744228] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.744231] ehci-pci: EHCI PCI platform driver
[ 0.744371] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.744376] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.744391] ehci-pci 0000:00:1a.7: debug port 1
[ 0.748299] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
[ 0.748324] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbaf6000
[ 0.760330] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.760367] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.760369] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.760370] usb usb1: Product: EHCI Host Controller
[ 0.760371] usb usb1: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[ 0.760372] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.760447] hub 1-0:1.0: USB hub found
[ 0.760452] hub 1-0:1.0: 6 ports detected
[ 0.760662] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.760666] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.760681] ehci-pci 0000:00:1d.7: debug port 1
[ 0.764597] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
[ 0.764613] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbafc000
[ 0.776317] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.776361] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.776362] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.776364] usb usb2: Product: EHCI Host Controller
[ 0.776365] usb usb2: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[ 0.776366] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.776557] hub 2-0:1.0: USB hub found
[ 0.776563] hub 2-0:1.0: 6 ports detected
[ 0.776674] ehci-platform: EHCI generic platform driver
[ 0.776679] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.776680] ohci-pci: OHCI PCI platform driver
[ 0.776687] ohci-platform: OHCI generic platform driver
[ 0.776690] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.776790] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.776794] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.776832] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008080
[ 0.776865] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.776866] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.776867] usb usb3: Product: UHCI Host Controller
[ 0.776869] usb usb3: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.776870] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.777050] hub 3-0:1.0: USB hub found
[ 0.777056] hub 3-0:1.0: 2 ports detected
[ 0.777204] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.777208] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.777249] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008400
[ 0.777280] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.777282] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.777283] usb usb4: Product: UHCI Host Controller
[ 0.777284] usb usb4: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.777286] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.777465] hub 4-0:1.0: USB hub found
[ 0.777471] hub 4-0:1.0: 2 ports detected
[ 0.777620] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.777624] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.777652] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008480
[ 0.777685] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.777686] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.777688] usb usb5: Product: UHCI Host Controller
[ 0.777689] usb usb5: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.777690] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.777874] hub 5-0:1.0: USB hub found
[ 0.777880] hub 5-0:1.0: 2 ports detected
[ 0.778030] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.778034] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.778062] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008800
[ 0.778095] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.778096] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.778097] usb usb6: Product: UHCI Host Controller
[ 0.778099] usb usb6: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.778100] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.778281] hub 6-0:1.0: USB hub found
[ 0.778287] hub 6-0:1.0: 2 ports detected
[ 0.778436] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.778440] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.778467] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008880
[ 0.778499] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.778500] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.778502] usb usb7: Product: UHCI Host Controller
[ 0.778503] usb usb7: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.778504] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.778686] hub 7-0:1.0: USB hub found
[ 0.778692] hub 7-0:1.0: 2 ports detected
[ 0.778841] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.778844] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.778872] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008c00
[ 0.778904] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.778905] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.778906] usb usb8: Product: UHCI Host Controller
[ 0.778908] usb usb8: Manufacturer: Linux 3.13.0-43-generic uhci_hcd
[ 0.778909] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.779065] hub 8-0:1.0: USB hub found
[ 0.779071] hub 8-0:1.0: 2 ports detected
[ 0.779171] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.779175] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 9
[ 0.779290] xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X
[ 0.779295] xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X
[ 0.779299] xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X
[ 0.779305] xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X
[ 0.779309] xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X
[ 0.779314] xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X
[ 0.779318] xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X
[ 0.779322] xhci_hcd 0000:07:00.0: irq 54 for MSI/MSI-X
[ 0.779413] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.779415] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.779416] usb usb9: Product: xHCI Host Controller
[ 0.779417] usb usb9: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[ 0.779419] usb usb9: SerialNumber: 0000:07:00.0
[ 0.779554] hub 9-0:1.0: USB hub found
[ 0.779562] hub 9-0:1.0: 2 ports detected
[ 0.779614] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.779617] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
[ 0.782663] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.782665] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.782666] usb usb10: Product: xHCI Host Controller
[ 0.782667] usb usb10: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[ 0.782668] usb usb10: SerialNumber: 0000:07:00.0
[ 0.782752] hub 10-0:1.0: USB hub found
[ 0.782761] hub 10-0:1.0: 2 ports detected
[ 0.788461] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.788875] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.788879] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.789125] mousedev: PS/2 mouse device common for all mice
[ 0.789469] rtc_cmos 00:02: RTC can wake from S4
[ 0.789637] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.789670] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.789712] device-mapper: uevent: version 1.0.3
[ 0.789798] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.789803] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.789874] TCP: cubic registered
[ 0.789932] NET: Registered protocol family 10
[ 0.790057] NET: Registered protocol family 17
[ 0.790062] Key type dns_resolver registered
[ 0.790359] Loading compiled-in X.509 certificates
[ 0.791113] Loaded X.509 cert 'Magrathea: Glacier signing key: 55ab2fe28ed5c60df9587150d1734c920ea7b818'
[ 0.791120] registered taskstats version 1
[ 0.793509] Key type trusted registered
[ 0.795570] Key type encrypted registered
[ 0.798152] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.798157] IMA: No TPM chip found, activating TPM-bypass!
[ 0.798800] regulator-dummy: disabling
[ 0.799068] Magic number: 15:650:625
[ 0.799246] rtc_cmos 00:02: setting system clock to 2015-01-30 08:38:54 UTC (1422607134)
[ 0.801414] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.801415] EDD information not available.
[ 0.801432] PM: Hibernation image not present or could not be loaded.
[ 1.075054] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.089696] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.348442] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 1.386899] usb 2-3: New USB device found, idVendor=148f, idProduct=5370
[ 1.386902] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.386904] usb 2-3: Product: 802.11 n WLAN
[ 1.386905] usb 2-3: Manufacturer: Ralink
[ 1.386907] usb 2-3: SerialNumber: 1.0
[ 1.393616] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 1.393632] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.548452] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.548468] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.548482] ata2.01: link offline, clearing class 3 to NONE
[ 1.556588] ata2.00: ATAPI: ASUS DRW-24F1ST a, 1.00, max UDMA/100
[ 1.572531] ata2.00: configured for UDMA/100
[ 1.574161] scsi 1:0:0:0: CD-ROM ASUS DRW-24F1ST a 1.00 PQ: 0 ANSI: 5
[ 1.576787] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.576789] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.576967] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.577039] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.578731] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.578732] Write protecting the kernel read-only data: 12288k
[ 1.580737] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[ 1.582183] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 1.604269] systemd-udevd[182]: starting version 204
[ 1.616778] scsi4 : pata_marvell
[ 1.616861] scsi5 : pata_marvell
[ 1.616892] ata5: PATA max UDMA/100 cmd 0xe480 ctl 0xe400 bmdma 0xe800 irq 17
[ 1.616893] ata6: PATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe808 irq 17
[ 1.618020] ahci 0000:08:00.0: version 3.0
[ 1.618074] ahci 0000:08:00.0: irq 55 for MSI/MSI-X
[ 1.618084] ahci 0000:08:00.0: controller can do FBS, turning on CAP_FBS
[ 1.620289] sky2: driver version 1.30
[ 1.620614] sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
[ 1.621148] sky2 0000:02:00.0: irq 56 for MSI/MSI-X
[ 1.622302] sky2 0000:02:00.0 eth0: addr dc:9c:52:00:04:9d
[ 1.625098] [drm] Initialized drm 1.1.0 20060810
[ 1.632306] ahci 0000:08:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.632308] ahci 0000:08:00.0: flags: 64bit ncq fbs pio
[ 1.632930] scsi6 : ahci
[ 1.633005] scsi7 : ahci
[ 1.633064] scsi8 : ahci
[ 1.633122] scsi9 : ahci
[ 1.633180] scsi10 : ahci
[ 1.633246] scsi11 : ahci
[ 1.633315] scsi12 : ahci
[ 1.633403] scsi13 : ahci
[ 1.633440] ata7: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef100 irq 55
[ 1.633442] ata8: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef180 irq 55
[ 1.633443] ata9: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef200 irq 55
[ 1.633445] ata10: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef280 irq 55
[ 1.633447] ata11: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef300 irq 55
[ 1.633449] ata12: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef380 irq 55
[ 1.633450] ata13: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef400 irq 55
[ 1.633452] ata14: SATA max UDMA/133 abar m2048@0xfbeef000 port 0xfbeef480 irq 55
[ 1.654661] [drm] radeon kernel modesetting enabled.
[ 1.654941] [drm] initializing kernel modesetting (RV380 0x1002:0x5B62 0x174B:0x0490).
[ 1.654958] [drm] register mmio base: 0xD8000000
[ 1.654964] [drm] register mmio size: 65536
[ 1.655016] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.655020] radeon 0000:06:00.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 1.655022] radeon 0000:06:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 1.655025] [drm] Detected VRAM RAM=256M, BAR=256M
[ 1.655026] [drm] RAM width 128bits DDR
[ 1.655135] [TTM] Zone kernel: Available graphics memory: 4083616 kiB
[ 1.655136] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.655137] [TTM] Initializing pool allocator
[ 1.655140] [TTM] Initializing DMA pool allocator
[ 1.655151] [drm] radeon: 256M of VRAM memory ready
[ 1.655152] [drm] radeon: 512M of GTT memory ready.
[ 1.655159] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.655497] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 1.656018] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 1.656032] radeon 0000:06:00.0: WB enabled
[ 1.656034] radeon 0000:06:00.0: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0xffff880035bbc000
[ 1.656035] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.656035] [drm] Driver supports precise vblank timestamp query.
[ 1.656050] radeon 0000:06:00.0: irq 57 for MSI/MSI-X
[ 1.656056] radeon 0000:06:00.0: radeon: using MSI.
[ 1.656071] [drm] radeon: irq initialized.
[ 1.656076] [drm] Loading R300 Microcode
[ 1.656358] [drm] radeon: ring at 0x00000000A0001000
[ 1.656377] [drm] ring test succeeded in 1 usecs
[ 1.656543] [drm] ib test succeeded in 0 usecs
[ 1.656767] [drm] Radeon Display Connectors
[ 1.656768] [drm] Connector 0:
[ 1.656769] [drm] VGA-1
[ 1.656775] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 1.656776] [drm] Encoders:
[ 1.656777] [drm] CRT1: INTERNAL_DAC1
[ 1.656778] [drm] Connector 1:
[ 1.656779] [drm] DVI-I-1
[ 1.656780] [drm] HPD1
[ 1.656782] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 1.656787] [drm] Encoders:
[ 1.656788] [drm] CRT2: INTERNAL_DAC2
[ 1.656794] [drm] DFP1: INTERNAL_TMDS1
[ 1.656795] [drm] Connector 2:
[ 1.656796] [drm] SVIDEO-1
[ 1.656797] [drm] Encoders:
[ 1.656798] [drm] TV1: INTERNAL_DAC2
[ 1.676361] firewire_ohci 0000:01:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.713609] [drm] fb mappable at 0xC00C0000
[ 1.713611] [drm] vram apper at 0xC0000000
[ 1.713611] [drm] size 5242880
[ 1.713612] [drm] fb depth is 24
[ 1.713613] [drm] pitch is 5120
[ 1.713769] fbcon: radeondrmfb (fb0) is primary device
[ 1.764079] tsc: Refined TSC clocksource calibration: 3219.929 MHz
[ 1.768532] Console: switching to colour frame buffer device 160x64
[ 1.772858] radeon 0000:06:00.0: fb0: radeondrmfb frame buffer device
[ 1.772859] radeon 0000:06:00.0: registered panic notifier
[ 1.772863] [drm] Initialized radeon 2.36.0 20080528 for 0000:06:00.0 on minor 0
[ 1.888515] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 1.930137] usb 6-2: New USB device found, idVendor=0cf3, idProduct=3005
[ 1.930139] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.952469] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.952490] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.952512] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.952550] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.952566] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.952589] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.952605] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.952618] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.952799] ata14.00: configured for UDMA/66
[ 1.960487] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.961639] ata7.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[ 1.961643] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.962526] ata7.00: configured for UDMA/133
[ 1.962897] scsi 6:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[ 1.963149] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 1.963228] sd 6:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.963233] sd 6:0:0:0: [sda] 4096-byte physical blocks
[ 1.963601] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.963603] sd 6:0:0:0: [sda] Write Protect is off
[ 1.963607] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.963743] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.963858] scsi 13:0:0:0: Attached scsi generic sg2 type 3
[ 2.042686] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.044451] sd 6:0:0:0: [sda] Attached SCSI disk
[ 2.172355] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 2.188528] firewire_core 0000:01:03.0: created device fw0: GUID f698f698fbbf5e21, S400
[ 2.236867] usb 8-2: New USB device found, idVendor=1631, idProduct=a510
[ 2.236870] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.236871] usb 8-2: Product: USB HUB Keyboard
[ 2.236872] usb 8-2: Manufacturer: Chicony
[ 2.238938] hub 8-2:1.0: USB hub found
[ 2.240863] hub 8-2:1.0: 5 ports detected
[ 2.241863] hub 8-2:1.0: insufficient power available to use all downstream ports
[ 2.356346] usb 9-1: new full-speed USB device number 2 using xhci_hcd
[ 2.760710] Switched to clocksource tsc
[ 3.205546] random: nonblocking pool is initialized
[ 3.762261] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.200246] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.337146] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 6.449477] systemd-udevd[425]: starting version 204
[ 7.350660] lp: driver loaded but no devices found
[ 7.355929] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[ 7.617141] snd_hda_intel 0000:00:1b.0: irq 58 for MSI/MSI-X
[ 7.659275] SKU: Nid=0x1d sku_cfg=0x4005e601
[ 7.659280] SKU: port_connectivity=0x1
[ 7.659281] SKU: enable_pcbeep=0x0
[ 7.659282] SKU: check_sum=0x00000005
[ 7.659282] SKU: customization=0x000000e6
[ 7.659283] SKU: external_amp=0x0
[ 7.659284] SKU: platform_type=0x0
[ 7.659284] SKU: swap=0x0
[ 7.659285] SKU: override=0x1
[ 7.659746] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 7.659747] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.659748] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.659749] mono: mono_out=0x0
[ 7.659749] dig-out=0x1e/0x0
[ 7.659750] inputs:
[ 7.659751] Front Mic=0x19
[ 7.659752] Rear Mic=0x18
[ 7.659753] Line=0x1a
[ 7.659753] dig-in=0x1f
[ 7.659754] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 7.659755] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
[ 7.671025] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.671197] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.671302] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.671365] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.671441] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.671508] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.671569] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 7.692443] ppdev: user-space parallel port driver
[ 8.469595] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 8.469600] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.469620] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.554907] EDAC MC: Ver: 3.0.0
[ 8.632033] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 8.632062] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 8.632147] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 8.748305] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 8.786017] kvm: disabled by bios
[ 8.800627] kvm: disabled by bios
[ 8.816419] kvm: disabled by bios
[ 8.832499] kvm: disabled by bios
[ 8.848435] kvm: disabled by bios
[ 8.872587] kvm: disabled by bios
[ 8.892454] kvm: disabled by bios
[ 9.017731] Bluetooth: Core ver 2.17
[ 9.017744] NET: Registered protocol family 31
[ 9.017746] Bluetooth: HCI device and connection manager initialized
[ 9.017751] Bluetooth: HCI socket layer initialized
[ 9.017754] Bluetooth: L2CAP socket layer initialized
[ 9.017758] Bluetooth: SCO socket layer initialized
[ 9.039777] usbcore: registered new interface driver btusb
[ 9.345380] type=1400 audit(1422607143.043:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=602 comm="apparmor_parser"
[ 9.345385] type=1400 audit(1422607143.043:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=602 comm="apparmor_parser"
[ 9.345388] type=1400 audit(1422607143.043:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[ 9.345398] type=1400 audit(1422607143.043:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=601 comm="apparmor_parser"
[ 9.345402] type=1400 audit(1422607143.043:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=601 comm="apparmor_parser"
[ 9.345405] type=1400 audit(1422607143.043:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=601 comm="apparmor_parser"
[ 9.345711] type=1400 audit(1422607143.043:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=602 comm="apparmor_parser"
[ 9.345715] type=1400 audit(1422607143.043:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[ 9.345728] type=1400 audit(1422607143.043:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=601 comm="apparmor_parser"
[ 9.345731] type=1400 audit(1422607143.043:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=601 comm="apparmor_parser"
[ 9.508164] cfg80211: Calling CRDA to update world regulatory domain
[ 9.734474] cfg80211: World regulatory domain updated:
[ 9.734477] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.734478] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.734480] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.734481] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.734482] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.734483] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.559602] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[ 12.763590] usb 9-1: device not accepting address 2, error -62
[ 12.875594] usb 2-3: reset high-speed USB device number 3 using ehci-pci
[ 12.907225] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 12.935306] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 13.007842] usb 9-1: new full-speed USB device number 3 using xhci_hcd
[ 13.250593] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.250780] usbcore: registered new interface driver rt2800usb
[ 13.379757] systemd-udevd[497]: renamed network interface wlan0 to wlan1
[ 14.107014] init: failsafe main process (805) killed by TERM signal
[ 15.441666] audit_printk_skb: 6 callbacks suppressed
[ 15.441669] type=1400 audit(1422607149.139:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=954 comm="apparmor_parser"
[ 15.441674] type=1400 audit(1422607149.139:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=954 comm="apparmor_parser"
[ 15.441677] type=1400 audit(1422607149.139:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=954 comm="apparmor_parser"
[ 15.441999] type=1400 audit(1422607149.139:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=954 comm="apparmor_parser"
[ 15.442002] type=1400 audit(1422607149.139:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=954 comm="apparmor_parser"
[ 15.442169] type=1400 audit(1422607149.139:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=954 comm="apparmor_parser"
[ 15.486888] type=1400 audit(1422607149.183:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=953 comm="apparmor_parser"
[ 15.486893] type=1400 audit(1422607149.183:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=953 comm="apparmor_parser"
[ 15.487091] type=1400 audit(1422607149.183:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=962 comm="apparmor_parser"
[ 15.487097] type=1400 audit(1422607149.183:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=953 comm="apparmor_parser"
[ 18.007413] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[ 19.094694] init: gdm main process (1207) killed by TERM signal
[ 19.639042] init: cups main process (1167) killed by HUP signal
[ 19.639051] init: cups main process ended, respawning
[ 19.708453] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.708456] Bluetooth: BNEP filters: protocol multicast
[ 19.708462] Bluetooth: BNEP socket layer initialized
[ 19.797010] Bluetooth: RFCOMM TTY layer initialized
[ 19.797016] Bluetooth: RFCOMM socket layer initialized
[ 19.797019] Bluetooth: RFCOMM ver 1.11
[ 21.933897] init: samba-ad-dc main process (1182) terminated with status 1
[ 23.211019] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[ 23.414994] usb 9-1: device not accepting address 3, error -62
[ 23.531117] usb 9-1: new full-speed USB device number 4 using xhci_hcd
[ 24.004411] sky2 0000:02:00.0 eth0: enabling interface
[ 24.005123] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.008594] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.013963] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 24.162241] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 24.396678] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 24.397776] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 27.080932] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 27.080948] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.444704] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 27.447089] vboxdrv: Found 8 processor cores.
[ 27.447333] vboxdrv: fAsync=0 offMin=0x2e2 offMax=0x1f2c
[ 27.447404] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 27.447406] vboxdrv: Successfully loaded version 4.3.20 (interface 0x001a0008).
[ 27.765758] vboxpci: IOMMU not found (not registered)
[ 28.530739] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[ 30.630635] init: plymouth-upstart-bridge main process ended, respawning
[ 30.634123] init: plymouth-upstart-bridge main process (1622) terminated with status 1
[ 30.634132] init: plymouth-upstart-bridge main process ended, respawning
[ 32.986931] init: plymouth-stop pre-start process (1744) terminated with status 1
[ 33.734401] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[ 33.938399] usb 9-1: device not accepting address 4, error -62
[ 34.050436] usb 9-1: new full-speed USB device number 5 using xhci_hcd
[ 39.050111] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[ 44.251797] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[ 44.455690] usb 9-1: device not accepting address 5, error -62
[ 44.455732] hub 9-0:1.0: unable to enumerate USB device on port 1
[ 44.800650] usb 8-2.1: new low-speed USB device number 3 using uhci_hcd
[ 44.868706] usb 8-2.1: New USB device found, idVendor=1631, idProduct=0006
[ 44.868711] usb 8-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 44.868715] usb 8-2.1: Product: IR Receiver
[ 44.868721] usb 8-2.1: Manufacturer: Chicony
[ 44.964694] usb 8-2.2: new low-speed USB device number 4 using uhci_hcd
[ 45.027698] usb 8-2.2: New USB device found, idVendor=045e, idProduct=0084
[ 45.027704] usb 8-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 45.027707] usb 8-2.2: Product: Basic Optical Mouse
[ 45.027710] usb 8-2.2: Manufacturer: Microsoft
[ 45.120662] usb 8-2.3: new full-speed USB device number 5 using uhci_hcd
[ 45.176693] usb 8-2.3: New USB device found, idVendor=08ff, idProduct=2580
[ 45.176698] usb 8-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 45.176701] usb 8-2.3: Product: Fingerprint Sensor
[ 45.268690] usb 8-2.5: new full-speed USB device number 6 using uhci_hcd
[ 45.333690] usb 8-2.5: New USB device found, idVendor=1631, idProduct=0510
[ 45.333695] usb 8-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 45.333698] usb 8-2.5: Product: USB HUB Keyboard
[ 45.333701] usb 8-2.5: Manufacturer: Chicony
[ 45.373006] hidraw: raw HID events driver (C) Jiri Kosina
[ 45.441797] usbcore: registered new interface driver usbhid
[ 45.441799] usbhid: USB HID core driver
[ 45.479763] input: Chicony IR Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.0/input/input12
[ 45.479992] hid-generic 0003:1631:0006.0001: input,hiddev0,hidraw0: USB HID v1.10 Keyboard [Chicony IR Receiver] on usb-0000:00:1d.2-2.1/input0
[ 45.480101] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.2/8-2.2:1.0/input/input13
[ 45.480244] hid-generic 0003:045E:0084.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.2-2.2/input0
[ 45.480366] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.5/8-2.5:1.0/input/input14
[ 45.480435] hid-generic 0003:1631:0510.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony USB HUB Keyboard ] on usb-0000:00:1d.2-2.5/input0
[ 45.484666] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.5/8-2.5:1.1/input/input15
[ 45.484778] hid-generic 0003:1631:0510.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Chicony USB HUB Keyboard ] on usb-0000:00:1d.2-2.5/input1
[ 47.996265] audit_printk_skb: 138 callbacks suppressed
[ 47.996268] type=1400 audit(1422607181.699:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2597 comm="apparmor_parser"
[ 47.996272] type=1400 audit(1422607181.699:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2597 comm="apparmor_parser"
[ 47.996600] type=1400 audit(1422607181.699:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2597 comm="apparmor_parser"
[ 126.101827] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 126.252003] ISOFS: changing to secondary rootSaphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#49 Le 30/01/2015, à 10:27
- nam1962
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Oups, j'avais loupé le .d du sources.list.d
@nany : c'est intellectuellement élégant et tu as la certitude que je la retiendrais par coeur ta commande 
Pour revenir à notre sujet :
- install originelle en raring mise à niveau en trusty (ceci peut expliquer tous nos soucis car une mise à niveau ne se comportera jamais comme une fresh install)
- plusieurs ppa qui contiennent des paquets système rebidouillés (x2machin webupdtruc...) donc on est pas loin du proposed, le système ne se comportera pas normalement
- je n'ai pas tout exploré, mais je vois aussi hostapd, donc tu transformes ton ordi en hotspot wifi, avant ou après boot ?
- je vois 2 PPA scribus en raring (certe commentés) pourquoi ne pas utiliser la version dépots ?
- il y a effectivement une erreur de GPG, voir là : http://doc.ubuntu-fr.org/utilisateurs/f … ns/cle_apt
Vu la longueur du fil et la complexité de l'install, il serait sans doute plus rapide :
de faire une fresh install après avoir désactivé les PPA
de ne réinstaller d’éventuels logiciels indispensables fournis par ces PPA comme suit:
activer le PPA - update - install truc-indispensable - désactiver le ppa
Dernière modification par nam1962 (Le 30/01/2015, à 11:47)
[ Modéré ]
Hors ligne
#50 Le 30/01/2015, à 11:20
- Bougron
Re : EXTREME lenteur : 2 min et 30s d'attente pour demarrer - A l'aide svp!
Bonjour
L'extrait ci-dessous du DMESG montre que le code erreur de l'usb a bien changé mais que JOLIET est toujours un PB
[ 27.447406] vboxdrv: Successfully loaded version 4.3.20 (interface 0x001a0008).
[ 27.765758] vboxpci: IOMMU not found (not registered)
[ 28.530739] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[ 30.630635] init: plymouth-upstart-bridge main process ended, respawning
[ 30.634123] init: plymouth-upstart-bridge main process (1622) terminated with status 1
[ 30.634132] init: plymouth-upstart-bridge main process ended, respawning
[ 32.986931] init: plymouth-stop pre-start process (1744) terminated with status 1
[ 33.734401] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[ 33.938399] usb 9-1: device not accepting address 4, error -62
[ 34.050436] usb 9-1: new full-speed USB device number 5 using xhci_hcd
[ 39.050111] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[ 44.251797] xhci_hcd 0000:07:00.0: Timeout while waiting for address device command
[ 44.455690] usb 9-1: device not accepting address 5, error -62
[ 44.455732] hub 9-0:1.0: unable to enumerate USB device on port 1
[ 44.800650] usb 8-2.1: new low-speed USB device number 3 using uhci_hcd
[ 44.868706] usb 8-2.1: New USB device found, idVendor=1631, idProduct=0006
[ 44.868711] usb 8-2.1: New USB device strings: Mfr=1, Product=217 secondes. Ce message est hyper fréquent dans le net....
Cela pourrait peut-être être un BUG => https://bugs.launchpad.net/ubuntu/+sour … comments/0
Puis l'autre.
[ 47.996600] type=1400 audit(1422607181.699:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2597 comm="apparmor_parser"
[ 126.101827] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 126.252003] ISOFS: changing to secondary root79 secondes!
Dernière modification par Bougron (Le 30/01/2015, à 12:05)
Hors ligne