#26 Le 18/09/2015, à 05:28
- malbo
Re : Asus UX303LA-R40025G
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7/2008: FAT32
Boot sector info: According to the info in the boot sector, sda1 has
204800 sectors.. But according to the info from the
partition table, it has 1048575 sectors.
Operating System:
Boot files: /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 256.1 GB, 256060514304 bytes
255 heads, 63 sectors/track, 31130 cylinders, total 500118192 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 500,118,191 500,118,191 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 40,113,123 39,062,500 Data partition (Linux)
/dev/sda3 491,935,744 500,117,503 8,181,760 Swap partition (Linux)
/dev/sda4 40,114,176 491,935,743 451,821,568 Data partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 7018-C583 vfat SYSTEM
/dev/sda2 838191d2-faaa-44d3-b867-a521d12d5c80 ext4
/dev/sda3 adabd3c1-eea6-4fbd-9307-576a6f0c2fd1 swap
/dev/sda4 f8c34106-1777-476e-8869-879e648de8cf ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Sep 17 20:41 ata-SanDisk_SD7SB3Q256G1002_150792405847 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 17 20:37 ata-SanDisk_SD7SB3Q256G1002_150792405847-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 17 20:37 ata-SanDisk_SD7SB3Q256G1002_150792405847-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 17 20:37 ata-SanDisk_SD7SB3Q256G1002_150792405847-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Sep 17 20:37 ata-SanDisk_SD7SB3Q256G1002_150792405847-part4 -> ../../sda4
lrwxrwxrwx 1 root root 9 Sep 17 20:41 wwn-0x5001b44e27827f57 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 17 20:37 wwn-0x5001b44e27827f57-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 17 20:37 wwn-0x5001b44e27827f57-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 17 20:37 wwn-0x5001b44e27827f57-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Sep 17 20:37 wwn-0x5001b44e27827f57-part4 -> ../../sda4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw)
/dev/sda2 / ext4 (rw,errors=remount-ro)
/dev/sda4 /home ext4 (rw)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 838191d2-faaa-44d3-b867-a521d12d5c80
else
search --no-floppy --fs-uuid --set=root 838191d2-faaa-44d3-b867-a521d12d5c80
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-838191d2-faaa-44d3-b867-a521d12d5c80' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 838191d2-faaa-44d3-b867-a521d12d5c80
else
search --no-floppy --fs-uuid --set=root 838191d2-faaa-44d3-b867-a521d12d5c80
fi
linux /boot/vmlinuz-3.19.0-28-generic.efi.signed root=UUID=838191d2-faaa-44d3-b867-a521d12d5c80 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.19.0-28-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-838191d2-faaa-44d3-b867-a521d12d5c80' {
menuentry 'Ubuntu, avec Linux 3.19.0-28-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-28-generic-advanced-838191d2-faaa-44d3-b867-a521d12d5c80' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 838191d2-faaa-44d3-b867-a521d12d5c80
else
search --no-floppy --fs-uuid --set=root 838191d2-faaa-44d3-b867-a521d12d5c80
fi
echo 'Chargement de Linux 3.19.0-28-generic…'
linux /boot/vmlinuz-3.19.0-28-generic.efi.signed root=UUID=838191d2-faaa-44d3-b867-a521d12d5c80 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-28-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-28-generic-recovery-838191d2-faaa-44d3-b867-a521d12d5c80' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 838191d2-faaa-44d3-b867-a521d12d5c80
else
search --no-floppy --fs-uuid --set=root 838191d2-faaa-44d3-b867-a521d12d5c80
fi
echo 'Chargement de Linux 3.19.0-28-generic…'
linux /boot/vmlinuz-3.19.0-28-generic.efi.signed root=UUID=838191d2-faaa-44d3-b867-a521d12d5c80 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-28-generic
}
menuentry 'Ubuntu, avec Linux 3.19.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-advanced-838191d2-faaa-44d3-b867-a521d12d5c80' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 838191d2-faaa-44d3-b867-a521d12d5c80
else
search --no-floppy --fs-uuid --set=root 838191d2-faaa-44d3-b867-a521d12d5c80
fi
echo 'Chargement de Linux 3.19.0-25-generic…'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=838191d2-faaa-44d3-b867-a521d12d5c80 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.19.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-recovery-838191d2-faaa-44d3-b867-a521d12d5c80' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 838191d2-faaa-44d3-b867-a521d12d5c80
else
search --no-floppy --fs-uuid --set=root 838191d2-faaa-44d3-b867-a521d12d5c80
fi
echo 'Chargement de Linux 3.19.0-25-generic…'
linux /boot/vmlinuz-3.19.0-25-generic root=UUID=838191d2-faaa-44d3-b867-a521d12d5c80 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.19.0-25-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-7018-C583' {
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 7018-C583
else
search --no-floppy --fs-uuid --set=root 7018-C583
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=838191d2-faaa-44d3-b867-a521d12d5c80 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=7018-C583 /boot/efi vfat defaults 0 1
# /home was on /dev/sda4 during installation
UUID=f8c34106-1777-476e-8869-879e648de8cf /home ext4 defaults 0 2
# swap was on /dev/sda3 during installation
UUID=adabd3c1-eea6-4fbd-9307-576a6f0c2fd1 none swap sw 0 0
--------------------------------------------------------------------------------
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-09-17__20h41 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in installed-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.19.0-28-generic.efi.signed root=UUID=838191d2-faaa-44d3-b867-a521d12d5c80 ro quiet splash vt.handoff=7
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 14.04.3 LTS CurrentSession:linux
/dev/sda1@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
=================== blkid:
/dev/sda1: LABEL="SYSTEM" UUID="7018-C583" TYPE="vfat"
/dev/sda2: UUID="838191d2-faaa-44d3-b867-a521d12d5c80" TYPE="ext4"
/dev/sda3: UUID="adabd3c1-eea6-4fbd-9307-576a6f0c2fd1" TYPE="swap"
/dev/sda4: UUID="f8c34106-1777-476e-8869-879e648de8cf" TYPE="ext4"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 août 5 07:20 grub.d
total 76
-rwxr-xr-x 1 root root 9424 juin 26 13:16 00_header
-rwxr-xr-x 1 root root 6058 mai 13 16:51 05_debian_theme
-rwxr-xr-x 1 root root 11608 juin 26 13:16 10_linux
-rwxr-xr-x 1 root root 10412 juin 26 13:16 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin 26 13:16 30_os-prober
-rwxr-xr-x 1 root root 1416 juin 26 13:16 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 26 13:16 40_custom
-rwxr-xr-x 1 root root 216 juin 26 13:16 41_custom
-rw-r--r-- 1 root root 483 juin 26 13:16 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=7018-C583 (sda1)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000,0007,0004,0002
Boot0000* ubuntu HD(1,800,100000,7572ff41-e393-4d89-92c7-db1af9f55287)File(EFIUBUNTUSHIMX64.EFI)
Boot0002* Hard Drive BIOS(2,0,00)..GO..NO........o.S.a.n.D.i.s.k. .S.D.7.S.B.3.Q.2.5.6.G.1.0.0.2....................A...........................>..Gd-.;.A..MQ..L.5.1.7.0.2.9.0.4.8.5.7.4. . . . . . . . ........BO
Boot0004* Windows Boot Manager HD(1,800,100000,7572ff41-e393-4d89-92c7-db1af9f55287)File(EFIMICROSOFTBOOTBOOTMGFW.EFI)..BO
Boot0007* ubuntu HD(1,800,100000,7572ff41-e393-4d89-92c7-db1af9f55287)File(EFIUBUNTUGRUBX64.EFI)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /boot/efi.
sda4 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /home.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA SanDisk SD7SB3Q2 (scsi)
Disk /dev/sda: 256GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 boot
2 538MB 20.5GB 20.0GB ext4
4 20.5GB 252GB 231GB ext4
3 252GB 256GB 4189MB linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:256GB:scsi:512:512:gpt:ATA SanDisk SD7SB3Q2;
1:1049kB:538MB:537MB:fat32::boot;
2:538MB:20.5GB:20.0GB:ext4::;
4:20.5GB:252GB:231GB:ext4::;
3:252GB:256GB:4189MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 238,5G SanDisk SD7
sda1 part vfat 512M SYSTEM 7018-C583
sda2 part ext4 18,6G 838191d2-faaa-44d3-b867-a521d12d5c80
sda3 part swap 3,9G adabd3c1-eea6-4fbd-9307-576a6f0c2fd1
sda4 part ext4 215,5G f8c34106-1777-476e-8869-879e648de8cf
KNAME ROTA RO RM STATE MOUNTPOINT
sda 0 0 0 running
sda1 0 0 0 /boot/efi
sda2 0 0 0 /
sda3 0 0 0 [SWAP]
sda4 0 0 0 /home
=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
/dev/sda4 on /home type ext4 (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=xx)
gvfsd-fuse on /root/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 input kmsg kvm log mapper mcelog media0 mei0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom usb v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
ls: impossible d'accéder à : Aucun fichier ou dossier de ce type
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 02 fe 19 |.X.MSDOS5.0.....|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 20 03 00 01 03 00 00 00 00 00 00 02 00 00 00 |. ..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 83 c5 18 70 4e 4f 20 4e 41 4d 45 20 20 |..)...pNO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 4e 02 8a 56 40 b4 41 |{......|.N..V@.A|
00000070 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a f6 c1 01 |..U..r...U.u....|
00000080 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd 13 73 05 |t..F..-.V@....s.|
00000090 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 d1 80 e2 |.....f...@f.....|
000000a0 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 66 f7 e1 |?.......Af...f..|
000000b0 66 89 46 f8 83 7e 16 00 75 38 83 7e 2a 00 77 32 |f.F..~..u8.~*.w2|
000000c0 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 00 e8 2b |f.F.f..........+|
000000d0 00 e9 2c 03 a0 fa 7d b4 7d 8b f0 ac 84 c0 74 17 |..,...}.}.....t.|
000000e0 3c ff 74 09 b4 0e bb 07 00 cd 10 eb ee a0 fb 7d |<.t............}|
000000f0 eb e5 a0 f9 7d eb e0 98 cd 16 cd 19 66 60 80 7e |....}.......f`.~|
00000100 02 00 0f 84 20 00 66 6a 00 66 50 06 53 66 68 10 |.... .fj.fP.Sfh.|
00000110 00 01 00 b4 42 8a 56 40 8b f4 cd 13 66 58 66 58 |....B.V@....fXfX|
00000120 66 58 66 58 eb 33 66 3b 46 f8 72 03 f9 eb 2a 66 |fXfX.3f;F.r...*f|
00000130 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 8a ca 66 8b |3.f..N.f......f.|
00000140 d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 40 8a e8 c0 |.f....v....V@...|
00000150 e4 06 0a cc b8 01 02 cd 13 66 61 0f 82 75 ff 81 |.........fa..u..|
00000160 c3 00 02 66 40 49 75 94 c3 42 4f 4f 54 4d 47 52 |...f@Iu..BOOTMGR|
00000170 20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 | ............|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 52 65 |..............Re|
000001b0 6d 6f 76 65 20 64 69 73 6b 73 20 6f 72 20 6f 74 |move disks or ot|
000001c0 68 65 72 20 6d 65 64 69 61 2e ff 0d 0a 44 69 73 |her media....Dis|
000001d0 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 20 |k error...Press |
000001e0 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 61 |any key to resta|
000001f0 72 74 0d 0a 00 00 00 00 00 ac cb d8 00 00 55 aa |rt............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda2 ext4 19G 4.3G 13G 25% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 386M 1.4M 384M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.9G 156K 1.9G 1% /run/shm
none tmpfs 100M 40K 100M 1% /run/user
/dev/sda1 vfat 96M 24M 73M 25% /boot/efi
/dev/sda4 ext4 212G 118M 202G 1% /home
=================== fdisk -l:
Disk /dev/sda: 256.1 GB, 256060514304 bytes
255 heads, 63 sectors/track, 31130 cylinders, total 500118192 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc16f14cc
Device Boot Start End Blocks Id System
/dev/sda1 1 500118191 250059095+ ee GPT
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
Si votre ordinateur redémarre directement sur Windows, essayez de changer l'ordre de démarrage dans votre BIOS.
Si votre BIOS ne permet pas de changer l'ordre de démarrage, changez l'entrée de démarrage par défaut de l'amorceur Windows.
Par exemple, vous pouvez démarrer Windows, puis saisir la commande suivante dans une invite de commande en mode administrateur :
bcdedit /set {bootmgr} path \EFI\...\grub*.efi
=================== User settings
The settings chosen by the user will not act on the boot.
Il s'agit d'une installation en mode EFI de Ubuntu 14.04.3 64 bits. Je constate que tu as modifié ton installation initiale (ton post #20) pour ajouter une partition /home.
Tu as toujours les fichiers de démarrage de Windows 7 dans ta partition EFI (c'est normal, l’installation automatique de Ubuntu réutilise une partition EFI existante sans écraser ce qu'il y a dedans). C'est la raison pour laquelle le menu Grub te propose une entrée "Windows Boot Manager (sur /dev/sda1)" alors que tu n'as plus de Windows installé. Tu peux laisser tout ça en l'état : c'est sans importance.
EDIT : je viens d'ajouter ton modèle Asus UX303LA-R40025G dans la Liste des portables « Asus »
Dernière modification par malbo (Le 18/09/2015, à 05:53)
Hors ligne
#27 Le 06/02/2017, à 13:04
- Lesaki
Re : Asus UX303LA-R40025G
Bonjour, je ressort le sujet car j'ai exactement le même modèle et j'aurais voulu savoir s'il été possible (si vous l'avez toujours) de me copier et m'envoyer la partition recovery w7, car je vais revendre l'ordinateur et le fait de réinstaller un w7 avec les pilotes ne fonctionnent pas comme il faut ...
(j'ai pas voulu ouvrir un topic uniquement pour ça)
Merci de votre réponse !
Hors ligne
#28 Le 09/02/2017, à 23:57
- Ayral
Re : Asus UX303LA-R40025G
Je" doute d'une part que cela concerne le support Ubuntu / Linux, et que d'autre part cela soit légal et/ou conforme à la charte du forum.
L'incitation ou la proposition à l'échange de données ou d'informations enfreignant la législation en vigueur sont prohibées. Les liens vers des sites proposant ou facilitant ce genre d'échange seront supprimés.
Pour mettre les retours de commande entre deux balises code, les explications sont là : https://forum.ubuntu-fr.org/viewtopic.php?id=1614731
Blog d'un retraité
Site de graphisme du fiston Loïc
Ubuntu 22.04 LTS sur un Thinkpad W540
Hors ligne