Ubuntu-fr

naguam

Re : [Abandonné] Double carte graphique

Cela a marché pour moi

---

Tous  les mordus (euhh non mes ordis) sont sous linux.                               
Vive GNU/Linux et Vive les pinguins

Velkynn

Re : [Abandonné] Double carte graphique

Mon pilote actuel est déjà le suivant : "Utilisation de Video Driver for the AMD graphics accelerators depuis fglrx (propriétaire)"
J'ai essayé avec le pilote "libre", même problème.

F50

Re : [Abandonné] Double carte graphique

@ Velkynn : On s'en balancent que ce soit écrit R5 ou R7 (c'est la même merde dans un autre emballage), néanmoins il t'indique clairement qu'il a opéré le switch :

PowerXpress: Discrete GPU is selected (High-Performance mode), please restart Xserver(s) for changes to take effect!

Pour tester, après avoir envoyé la commande au #21 et une fois relogé dans ta session tu tapes ceci dans un terminal et tu laisses tourner quelques secondes pour avoir les FPS :

fgl_glxgears

Puis tu tapes cette commande et tu refaits la même chose :

sudo aticonfig --px-igpu

Si l'une est plus puissante que l'autre (en théorie --px-dgpu) il y aura une "nette" différence dans le résultat des FPS.

@ naguam : Qu'est-ce donc que "le pilote intégré" ? Il y a pilote libre et proprio, c'est tout.

C'est pas des pingouins mais un manchot.

Dernière modification par F50 (Le 12/04/2016, à 07:00)

Velkynn

Re : [Abandonné] Double carte graphique

Les résultats obtenus sont exactement les mêmes. Cependant ça m’étonnerait que la R5 soit aussi puissante que la R7, la supériorité de la R7 est flagrante sur Windows, en switchant je passait de 20 fps à 80 fps en moyenne.

F50

Re : [Abandonné] Double carte graphique

Et quels sont les résultats ? Poste les.

Velkynn

Re : [Abandonné] Double carte graphique

Discrète :

Using GLX_SGIX_pbuffer
3501 frames in 5.0 seconds = 700.200 FPS
4197 frames in 5.0 seconds = 839.400 FPS
4260 frames in 5.0 seconds = 852.000 FPS
4128 frames in 5.0 seconds = 825.600 FPS
4080 frames in 5.0 seconds = 816.000 FPS
3816 frames in 5.0 seconds = 763.200 FPS
3874 frames in 5.0 seconds = 774.800 FPS
3886 frames in 5.0 seconds = 777.200 FPS
3847 frames in 5.0 seconds = 769.400 FPS
4012 frames in 5.0 seconds = 802.400 FPS

Intégrée :

Using GLX_SGIX_pbuffer
3394 frames in 5.0 seconds = 678.800 FPS
3913 frames in 5.0 seconds = 782.600 FPS
3898 frames in 5.0 seconds = 779.600 FPS
2925 frames in 5.0 seconds = 585.000 FPS
3457 frames in 5.0 seconds = 691.400 FPS
2886 frames in 5.0 seconds = 577.200 FPS
2754 frames in 5.0 seconds = 550.800 FPS
3566 frames in 5.0 seconds = 713.200 FPS
3533 frames in 5.0 seconds = 706.600 FPS
3700 frames in 5.0 seconds = 740.000 FPS

Dernière modification par Velkynn (Le 12/04/2016, à 10:36)

F50

Re : [Abandonné] Double carte graphique

Mouais... Pas de différence.

Refait les switch entre cartes et test FPS puis, une fois terminé, poste le contenu de /var/log/Xorg.0.log.

Poste aussi le retour de :

aticonfig --pxl

Edit : D'après le lien ci-dessous, il semble que les config basées sur le gpu Mullins ne supportent pas le switch #17 :

https://bugs.launchpad.net/ubuntu/+sour … ug/1315285

Dernière modification par F50 (Le 13/04/2016, à 06:53)

Velkynn

Re : [Abandonné] Double carte graphique

Je rencontre un autre problème, quand j'installe les drivers propriétaires mon PC devient très lent, certains programmes prennent des années à se lancer ou ne se lancent carrément pas (Logithèque Ubuntu, Paramètres Sys., Chrome, etc...) je ne peux pas regarder de vidéos sur Youtube sans avoir une image saccadée.
Je suis repassé sous le pilote Libre, tout est redevenu rapide, mais du coup je ne peux plus exécuter la commande "sudo aticonfig --px-dgpu". Et en vue de ce que tu me dis à propos des GPU Mullins, j'imagine que trouve une solution à mon problème est impossible.
Alors j'abandonne, je vais rester sous les pilotes Libres et utiliser mon PC pour la bureautique uniquement. J'attendrai d'avoir mon nouveau PC dans quelques mois pour faire autre chose.
En tout cas je te remercie énormément d'avoir pris le temps de faire des recherches pour m'aider. Même si mon PC ne me permet pas de trouver une solution j'espère que cette discussion en aidera d'autres.

F50

Re : [Abandonné] Double carte graphique

Je comprend, c'est des plaies ces HP et en plus avec AMD qui font des pilotes en carton...

De rien, si je trouve un moyen je posterai.

Ajoute[Anbandonné] dans le titre de ton sujet.

F50

Re : [Abandonné] Double carte graphique

Si jamais tu es intéressé à retenter, regarde ceci, il faut installer fglrx-updates :

http://askubuntu.com/questions/730110/p … on-r7-m260

Velkynn

Re : [Abandonné] Double carte graphique

J'ai suivi le topic et après avoir essayé les solutions proposées je fais le teste "aticonfig --pxl" j'obtiens :

PowerXpress: Discrete GPU is active (High-Performance mode).

Ce pendant, les résultat de la commande "fglrxinfo" restent :

display: :0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon(TM) R5 Graphics         
OpenGL version string: 4.5.13399 Compatibility Profile Context 15.201.1151

Le driver "fglrx-updates" est à jour, tous mes paquets sont à jour, j'ai bien Ubuntu 14.04 LTS, mon PC à l'air de reconnaître ma carte discrète (qui change selon l'humeur de mon PC d'ailleurs, des fois c'est une R7 M260, des fois une R7 M360), mais impossible de l'utiliser. Ou du moins de noter une réelle différence entre elle et la R5. Après peut-être qu'elle est juste nulle et que ses capacités sont similaires à celles de la R5, dans quel cas mon problème est résolu, c'est simplement mon PC qui est nul à chier.

naguam

Re : [Abandonné] Double carte graphique

Une m360 est une m260 overclockée un chouïa plus haut et plus optimisée, c'est pour cela qu'ubuntu peut les confondres
ma m260 est censée être ancienne mais elle a pourtant bien l'OpenGL 4.5

Dernière modification par naguam (Le 15/04/2016, à 14:44)

---

Tous  les mordus (euhh non mes ordis) sont sous linux.                               
Vive GNU/Linux et Vive les pinguins

F50

Re : [Abandonné] Double carte graphique

Ok, fait les manip du switch entre les deux cartes et juste après, poste le contenu de /var/log/Xorg.0.log

Edit : En regardant de plus aux résultats du #31 et les dires de naguam concernant la différence des deux cartes, on voient que la discrète est un peu plus performante. Si elles sont similaires l'un expliquerait l'autre.

Dernière modification par F50 (Le 15/04/2016, à 11:42)

Velkynn

Re : [Abandonné] Double carte graphique

Here we go, /var/log/Xorg.0.log :

[  1887.115] 
X.Org X Server 1.17.2
Release Date: 2015-06-16
[  1887.115] X Protocol Version 11, Revision 0
[  1887.115] Build Operating System: Linux 3.19.0-43-generic x86_64 Ubuntu
[  1887.115] Current Operating System: Linux tepc-laptop 4.2.0-35-generic #40~14.04.1-Ubuntu SMP Fri Mar 18 16:37:35 UTC 2016 x86_64
[  1887.116] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-35-generic.efi.signed root=UUID=9a7d0e41-8902-4609-81b0-7a82dcdeba0d ro quiet splash vt.handoff=7
[  1887.116] Build Date: 15 January 2016  10:17:33PM
[  1887.116] xorg-server 2:1.17.2-1ubuntu9.1~trusty1 (For technical support please see http://www.ubuntu.com/support) 
[  1887.116] Current version of pixman: 0.30.2
[  1887.116] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1887.116] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1887.116] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 15 13:08:00 2016
[  1887.116] (==) Using config file: "/etc/X11/xorg.conf"
[  1887.116] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1887.117] (==) ServerLayout "aticonfig Layout"
[  1887.117] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[  1887.117] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[  1887.117] (**) |   |-->Device "aticonfig-Device[0]-0"
[  1887.117] (==) Automatically adding devices
[  1887.117] (==) Automatically enabling devices
[  1887.117] (==) Automatically adding GPU devices
[  1887.117] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  1887.117] 	Entry deleted from font path.
[  1887.117] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[  1887.117] 	Entry deleted from font path.
[  1887.117] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[  1887.118] 	Entry deleted from font path.
[  1887.118] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[  1887.118] 	Entry deleted from font path.
[  1887.118] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[  1887.118] 	Entry deleted from font path.
[  1887.118] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[  1887.118] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[  1887.118] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1887.118] (II) Loader magic: 0x558414c1ac80
[  1887.118] (II) Module ABI versions:
[  1887.118] 	X.Org ANSI C Emulation: 0.4
[  1887.118] 	X.Org Video Driver: 19.0
[  1887.118] 	X.Org XInput driver : 21.0
[  1887.118] 	X.Org Server Extension : 9.0
[  1887.120] (--) PCI:*(0:0:1:0) 1002:9851:103c:80b9 rev 69, Mem @ 0xb0000000/268435456, 0xd0800000/8388608, 0xfeb00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[  1887.120] (II) "glx" will be loaded by default.
[  1887.120] (II) LoadModule: "glx"
[  1887.121] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so
[  1887.121] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[  1887.121] 	compiled for 6.9.0, module version = 1.0.0
[  1887.121] (II) LoadModule: "fglrx"
[  1887.121] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[  1887.159] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[  1887.159] 	compiled for 1.4.99.906, module version = 15.20.3
[  1887.159] 	Module class: X.Org Video Driver
[  1887.160] (II) Loading sub module "fglrxdrm"
[  1887.160] (II) LoadModule: "fglrxdrm"
[  1887.160] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[  1887.160] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[  1887.160] 	compiled for 1.4.99.906, module version = 15.20.3
[  1887.160] (II) AMD Proprietary Linux Driver Version Identifier:15.20.3
[  1887.160] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-15.201.1151              
[  1887.160] (II) AMD Proprietary Linux Driver Build Date: Sep  8 2015 15:06:35
[  1887.160] (++) using VT number 7

[  1887.161] (WW) Falling back to old probe method for fglrx
[  1887.181] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[  1887.229] ukiDynamicMajor: found major device number 246
[  1887.229] ukiDynamicMajor: found major device number 246
[  1887.229] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1887.229] ukiOpenDevice: node name is /dev/ati/card0
[  1887.229] ukiOpenDevice: open result is 9, (OK)
[  1887.229] ukiOpenByBusid: ukiOpenMinor returns 9
[  1887.229] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1887.229] ukiOpenDevice: node name is /dev/ati/card1
[  1887.229] ukiOpenDevice: open result is 9, (OK)
[  1887.229] ukiOpenByBusid: ukiOpenMinor returns 9
[  1887.229] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1887.277] ukiDynamicMajor: found major device number 246
[  1887.277] ukiDynamicMajor: found major device number 246
[  1887.277] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[  1887.277] ukiOpenDevice: node name is /dev/ati/card0
[  1887.278] ukiOpenDevice: open result is 9, (OK)
[  1887.278] ukiOpenByBusid: ukiOpenMinor returns 9
[  1887.278] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1887.286] (--) Chipset Supported AMD Graphics Processor (0x9851) found
[  1887.286] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[  1887.287] (II) fglrx(0): pEnt->device->identifier=0x5584159636a0
[  1887.287] (II) fglrx(0): === [xdl_xs117_atiddxPreInit] === begin
[  1887.287] (II) fglrx(0): FB driver is enabled
[  1887.288] (II) Loading sub module "vgahw"
[  1887.288] (II) LoadModule: "vgahw"
[  1887.288] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[  1887.288] (II) Module vgahw: vendor="X.Org Foundation"
[  1887.288] 	compiled for 1.17.2, module version = 0.1.0
[  1887.289] 	ABI class: X.Org Video Driver, version 19.0
[  1887.289] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[  1887.289] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  1887.289] (==) fglrx(0): Default visual is TrueColor
[  1887.289] (**) fglrx(0): Option "DPMS" "true"
[  1887.289] (==) fglrx(0): RGB weight 888
[  1887.289] (II) fglrx(0): Using 8 bits per RGB 
[  1887.290] (==) fglrx(0): Buffer Tiling is ON
[  1887.290] (II) Loading sub module "fglrxdrm"
[  1887.290] (II) LoadModule: "fglrxdrm"
[  1887.290] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[  1887.290] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[  1887.290] 	compiled for 1.4.99.906, module version = 15.20.3
[  1887.340] ukiDynamicMajor: found major device number 246
[  1887.340] ukiDynamicMajor: found major device number 246
[  1887.340] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[  1887.340] ukiOpenDevice: node name is /dev/ati/card0
[  1887.340] ukiOpenDevice: open result is 11, (OK)
[  1887.341] ukiOpenByBusid: ukiOpenMinor returns 11
[  1887.341] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1887.341] (**) fglrx(0): NoAccel = NO
[  1887.341] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[  1887.341] (--) fglrx(0): Chipset: "AMD Radeon(TM) R5 Graphics         " (Chipset = 0x9851)
[  1887.342] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x80b9)
[  1887.342] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[  1887.342] (--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
[  1887.342] (--) fglrx(0): MMIO registers at 0xfeb00000
[  1887.342] (--) fglrx(0): I/O port at 0x0000f000
[  1887.342] (==) fglrx(0): ROM-BIOS at 0x000c0000
[  1887.343] (II) fglrx(0): ATIF platform detected
[  1887.396] (II) fglrx(0): Battery is used
[  1887.397] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[  1887.397] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[  1887.397] (II) fglrx(0): PCIE card detected
[  1887.397] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[  1887.397] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[  1887.400] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000)
[  1887.401] (II) fglrx(0): RandR 1.2 support is enabled!
[  1887.401] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[  1887.401] (II) Loading sub module "fb"
[  1887.401] (II) LoadModule: "fb"
[  1887.401] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1887.401] (II) Module fb: vendor="X.Org Foundation"
[  1887.401] 	compiled for 1.17.2, module version = 1.0.0
[  1887.401] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1887.401] (II) fglrx(0): EDID Management option: EDID Management is enabled
[  1887.401] (II) Loading sub module "ddc"
[  1887.402] (II) LoadModule: "ddc"
[  1887.402] (II) Module "ddc" already built-in
[  1887.469] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[  1887.469] (II) fglrx(0): Output DFP1 has no monitor section
[  1887.469] (II) Loading sub module "ddc"
[  1887.469] (II) LoadModule: "ddc"
[  1887.469] (II) Module "ddc" already built-in
[  1887.469] (WW) fglrx(0): Failed to get EDID by ACPI
[  1887.469] (II) fglrx(0): Connected Display0: LVDS
[  1887.470] (II) fglrx(0): Display0 EDID data ---------------------------
[  1887.470] (II) fglrx(0): Manufacturer: AUO  Model: 159e  Serial#: 0
[  1887.470] (II) fglrx(0): Year: 2012  Week: 0
[  1887.470] (II) fglrx(0): EDID Version: 1.4
[  1887.470] (II) fglrx(0): Digital Display Input
[  1887.470] (II) fglrx(0): 6 bits per channel
[  1887.470] (II) fglrx(0): Digital interface is undefined
[  1887.470] (II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[  1887.470] (II) fglrx(0): Gamma: 2.20
[  1887.470] (II) fglrx(0): No DPMS capabilities specified
[  1887.470] (II) fglrx(0): Supported color encodings: RGB 4:4:4 
[  1887.470] (II) fglrx(0): First detailed timing is preferred mode
[  1887.470] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[  1887.470] (II) fglrx(0): redX: 0.620 redY: 0.340   greenX: 0.325 greenY: 0.570
[  1887.470] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[  1887.470] (II) fglrx(0): Manufacturer's mask: 0
[  1887.470] (II) fglrx(0): Supported detailed timing:
[  1887.470] (II) fglrx(0): clock: 107.8 MHz   Image Size:  382 x 214 mm
[  1887.470] (II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1930 h_border: 0
[  1887.470] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 928 v_border: 0
[  1887.470] (II) fglrx(0): Supported detailed timing:
[  1887.470] (II) fglrx(0): clock: 71.9 MHz   Image Size:  382 x 214 mm
[  1887.470] (II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1930 h_border: 0
[  1887.470] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 928 v_border: 0
[  1887.470] (II) fglrx(0): Unknown vendor-specific block 2
[  1887.470] (II) fglrx(0): EDID (in hex):
[  1887.470] (II) fglrx(0): 	00ffffffffffff0006af9e1500000000
[  1887.471] (II) fglrx(0): 	001601049026157802c4959e57539226
[  1887.471] (II) fglrx(0): 	0f505400000001010101010101010101
[  1887.471] (II) fglrx(0): 	0101010101011c2a404a61841c303020
[  1887.471] (II) fglrx(0): 	36007ed610000018131c404a61841c30
[  1887.471] (II) fglrx(0): 	302036007ed610000018000000000000
[  1887.471] (II) fglrx(0): 	00000000000000000000000000000002
[  1887.471] (II) fglrx(0): 	000c49ff0c3c6e1e1e376e20202000e6
[  1887.471] (II) fglrx(0): End of Display0 EDID data --------------------
[  1887.471] (II) fglrx(0): Dynamic Surface Resizing Enabled
[  1887.472] (WW) fglrx(0): Failed to get EDID by ACPI
[  1887.472] (II) fglrx(0): EDID for output LVDS
[  1887.472] (II) fglrx(0): Manufacturer: AUO  Model: 159e  Serial#: 0
[  1887.472] (II) fglrx(0): Year: 2012  Week: 0
[  1887.472] (II) fglrx(0): EDID Version: 1.4
[  1887.472] (II) fglrx(0): Digital Display Input
[  1887.472] (II) fglrx(0): 6 bits per channel
[  1887.472] (II) fglrx(0): Digital interface is undefined
[  1887.472] (II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[  1887.472] (II) fglrx(0): Gamma: 2.20
[  1887.472] (II) fglrx(0): No DPMS capabilities specified
[  1887.472] (II) fglrx(0): Supported color encodings: RGB 4:4:4 
[  1887.472] (II) fglrx(0): First detailed timing is preferred mode
[  1887.472] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[  1887.472] (II) fglrx(0): redX: 0.620 redY: 0.340   greenX: 0.325 greenY: 0.570
[  1887.472] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[  1887.472] (II) fglrx(0): Manufacturer's mask: 0
[  1887.472] (II) fglrx(0): Supported detailed timing:
[  1887.472] (II) fglrx(0): clock: 107.8 MHz   Image Size:  382 x 214 mm
[  1887.472] (II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1930 h_border: 0
[  1887.472] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 928 v_border: 0
[  1887.472] (II) fglrx(0): Supported detailed timing:
[  1887.472] (II) fglrx(0): clock: 71.9 MHz   Image Size:  382 x 214 mm
[  1887.472] (II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1930 h_border: 0
[  1887.473] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 928 v_border: 0
[  1887.473] (II) fglrx(0): Unknown vendor-specific block 2
[  1887.473] (II) fglrx(0): EDID (in hex):
[  1887.473] (II) fglrx(0): 	00ffffffffffff0006af9e1500000000
[  1887.473] (II) fglrx(0): 	001601049026157802c4959e57539226
[  1887.473] (II) fglrx(0): 	0f505400000001010101010101010101
[  1887.473] (II) fglrx(0): 	0101010101011c2a404a61841c303020
[  1887.473] (II) fglrx(0): 	36007ed610000018131c404a61841c30
[  1887.473] (II) fglrx(0): 	302036007ed610000018000000000000
[  1887.473] (II) fglrx(0): 	00000000000000000000000000000002
[  1887.473] (II) fglrx(0): 	000c49ff0c3c6e1e1e376e20202000e6
[  1887.473] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[  1887.473] (II) fglrx(0): Printing DDC gathered Modelines:
[  1887.473] (II) fglrx(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (55.9 kHz eP)
[  1887.473] (II) fglrx(0): Modeline "1600x900"x0.0   71.87  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (37.2 kHz e)
[  1887.473] (II) fglrx(0): Printing probed modes for output LVDS
[  1887.473] (II) fglrx(0): Modeline "1600x900"x60.0  107.80  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (55.9 kHz eP)
[  1887.473] (II) fglrx(0): Modeline "1600x900"x40.0   71.87  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (37.2 kHz e)
[  1887.473] (II) fglrx(0): Modeline "1440x900"x60.0  107.80  1440 1648 1680 1930  900 903 909 928 -hsync -vsync (55.9 kHz e)
[  1887.473] (II) fglrx(0): Modeline "1440x900"x40.0   71.87  1440 1648 1680 1930  900 903 909 928 -hsync -vsync (37.2 kHz e)
[  1887.473] (II) fglrx(0): Modeline "1280x768"x60.0  107.80  1280 1648 1680 1930  768 903 909 928 -hsync -vsync (55.9 kHz e)
[  1887.473] (II) fglrx(0): Modeline "1280x768"x40.0   71.87  1280 1648 1680 1930  768 903 909 928 -hsync -vsync (37.2 kHz e)
[  1887.473] (II) fglrx(0): Modeline "1280x720"x60.0  107.80  1280 1648 1680 1930  720 903 909 928 -hsync -vsync (55.9 kHz e)
[  1887.473] (II) fglrx(0): Modeline "1280x720"x40.0   71.87  1280 1648 1680 1930  720 903 909 928 -hsync -vsync (37.2 kHz e)
[  1887.473] (II) fglrx(0): Modeline "1024x768"x60.0  107.80  1024 1648 1680 1930  768 903 909 928 -hsync -vsync (55.9 kHz e)
[  1887.473] (II) fglrx(0): Modeline "1024x768"x40.0   71.87  1024 1648 1680 1930  768 903 909 928 -hsync -vsync (37.2 kHz e)
[  1887.473] (II) fglrx(0): Modeline "800x600"x60.0  107.80  800 1648 1680 1930  600 903 909 928 -hsync -vsync (55.9 kHz e)
[  1887.473] (II) fglrx(0): Modeline "800x600"x40.0   71.87  800 1648 1680 1930  600 903 909 928 -hsync -vsync (37.2 kHz e)
[  1887.473] (II) fglrx(0): Modeline "640x480"x60.0  107.80  640 1648 1680 1930  480 903 909 928 -hsync -vsync (55.9 kHz e)
[  1887.473] (II) fglrx(0): Modeline "640x480"x40.0   71.87  640 1648 1680 1930  480 903 909 928 -hsync -vsync (37.2 kHz e)
[  1887.473] (II) fglrx(0): EDID for output DFP1
[  1887.473] (II) fglrx(0): Output LVDS connected
[  1887.473] (II) fglrx(0): Output DFP1 disconnected
[  1887.473] (II) fglrx(0): Using exact sizes for initial modes
[  1887.473] (II) fglrx(0): Output LVDS using initial mode 1600x900
[  1887.473] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  1887.473] (II) fglrx(0): Display dimensions: (380, 210) mm
[  1887.473] (II) fglrx(0): DPI set to (106, 108)
[  1887.473] (II) fglrx(0): Adapter AMD Radeon(TM) R5 Graphics          has 2 configurable heads and 1 displays connected.
[  1887.474] (==) fglrx(0):  PseudoColor visuals disabled
[  1887.474] (II) Loading sub module "ramdac"
[  1887.474] (II) LoadModule: "ramdac"
[  1887.474] (II) Module "ramdac" already built-in
[  1887.474] (==) fglrx(0): NoDRI = NO
[  1887.474] (==) fglrx(0): Capabilities: 0x00000000
[  1887.474] (==) fglrx(0): CapabilitiesEx: 0x00000000
[  1887.474] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[  1887.474] (==) fglrx(0): UseFastTLS=0
[  1887.474] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[  1887.474] (--) Depth 24 pixmap format is 32 bpp
[  1887.474] (II) fglrx(0): doing swlDriScreenInit
[  1887.474] (II) fglrx(0): swlDriScreenInit for fglrx driver
[  1887.474] ukiDynamicMajor: found major device number 246
[  1887.475] ukiDynamicMajor: found major device number 246
[  1887.475] ukiDynamicMajor: found major device number 246
[  1887.475] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[  1887.475] ukiOpenDevice: node name is /dev/ati/card0
[  1887.475] ukiOpenDevice: open result is 12, (OK)
[  1887.475] ukiOpenByBusid: ukiOpenMinor returns 12
[  1887.475] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1887.475] (II) fglrx(0): [uki] DRM interface version 1.0
[  1887.475] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:0:1:0"
[  1887.475] (II) fglrx(0): [uki] added 8192 byte SAREA at 0xbb4000
[  1887.475] (II) fglrx(0): [uki] mapped SAREA 0xbb4000 to 0x7f4fed5f6000
[  1887.475] (II) fglrx(0): [uki] framebuffer handle = 0xbb5000
[  1887.475] (II) fglrx(0): [uki] added 1 reserved context for kernel
[  1887.475] (II) fglrx(0): swlDriScreenInit done
[  1887.475] (II) fglrx(0): Kernel Module Version Information:
[  1887.475] (II) fglrx(0):     Name: fglrx
[  1887.475] (II) fglrx(0):     Version: 15.20.3
[  1887.475] (II) fglrx(0):     Date: Sep  8 2015
[  1887.475] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[  1887.475] (II) fglrx(0): Kernel Module version matches driver.
[  1887.475] (II) fglrx(0): Kernel Module Build Time Information:
[  1887.475] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        4.2.0-35-generic
[  1887.475] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[  1887.475] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[  1887.475] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[  1887.475] (II) fglrx(0): [uki] register handle = 0x00bb6000
[  1887.476] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
[  1887.476] (II) fglrx(0): DRI initialization successfull
[  1887.476] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01110000
[  1887.477] (==) fglrx(0): Backing store enabled
[  1887.477] (**) fglrx(0): DPMS enabled
[  1887.477] (II) fglrx(0): Initialized in-driver Xinerama extension
[  1887.477] (**) fglrx(0): Textured Video is enabled.
[  1887.477] (II) LoadModule: "glesx"
[  1887.477] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/glesx.so
[  1887.482] (II) Module glesx: vendor="X.Org Foundation"
[  1887.482] 	compiled for 1.4.99.906, module version = 1.0.0
[  1887.482] (II) fglrx(0): GLESX enableFlags = 8784
[  1887.482] (II) fglrx(0): GLESX is enabled
[  1887.482] (II) LoadModule: "amdxmm"
[  1887.482] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/amdxmm.so
[  1887.483] (II) Module amdxmm: vendor="X.Org Foundation"
[  1887.483] 	compiled for 1.4.99.906, module version = 2.0.0
[  1887.485] (II) fglrx(0): Enable composite support successfully
[  1887.485] (WW) fglrx(0): Option "VendorName" is not used
[  1887.485] (WW) fglrx(0): Option "ModelName" is not used
[  1887.485] (II) fglrx(0): X context handle = 0x15
[  1887.485] (II) fglrx(0): [DRI] installation complete
[  1887.485] (==) fglrx(0): Silken mouse enabled
[  1887.485] (==) fglrx(0): Using HW cursor of display infrastructure!
[  1887.485] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1887.486] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[  1888.874] (--) RandR disabled
[  1888.883] ukiDynamicMajor: found major device number 246
[  1888.883] ukiDynamicMajor: found major device number 246
[  1888.883] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[  1888.883] ukiOpenDevice: node name is /dev/ati/card0
[  1888.883] ukiOpenDevice: open result is 13, (OK)
[  1888.883] ukiOpenByBusid: ukiOpenMinor returns 13
[  1888.883] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1888.883] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[  1888.883] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[  1888.883] (EE) AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[  1888.888] ukiDynamicMajor: found major device number 246
[  1888.888] ukiDynamicMajor: found major device number 246
[  1888.889] ukiDynamicMajor: found major device number 246
[  1888.889] ukiOpenDevice: node name is /dev/ati/card0
[  1888.889] ukiOpenDevice: open result is 14, (OK)
[  1888.889] ukiGetBusid returned 'PCI:0:1:0'
[  1888.889] ukiOpenDevice: node name is /dev/ati/card1
[  1888.889] ukiOpenDevice: open result is 14, (OK)
[  1888.889] ukiGetBusid returned 'PCI:1:0:0'
[  1888.889] ukiOpenDevice: node name is /dev/ati/card2
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: Open failed
[  1888.889] ukiOpenDevice: node name is /dev/ati/card3
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: Open failed
[  1888.889] ukiOpenDevice: node name is /dev/ati/card4
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: Open failed
[  1888.889] ukiOpenDevice: node name is /dev/ati/card5
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: Open failed
[  1888.889] ukiOpenDevice: node name is /dev/ati/card6
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: Open failed
[  1888.889] ukiOpenDevice: node name is /dev/ati/card7
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: Open failed
[  1888.889] ukiOpenDevice: node name is /dev/ati/card8
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.889] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: Open failed
[  1888.890] ukiOpenDevice: node name is /dev/ati/card9
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: Open failed
[  1888.890] ukiOpenDevice: node name is /dev/ati/card10
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: Open failed
[  1888.890] ukiOpenDevice: node name is /dev/ati/card11
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: Open failed
[  1888.890] ukiOpenDevice: node name is /dev/ati/card12
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: Open failed
[  1888.890] ukiOpenDevice: node name is /dev/ati/card13
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: Open failed
[  1888.890] ukiOpenDevice: node name is /dev/ati/card14
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: Open failed
[  1888.890] ukiOpenDevice: node name is /dev/ati/card15
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: open result is -1, (No such device)
[  1888.890] ukiOpenDevice: Open failed
[  1888.890] ukiDynamicMajor: found major device number 246
[  1888.890] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[  1888.890] ukiOpenDevice: node name is /dev/ati/card0
[  1888.890] ukiOpenDevice: open result is 14, (OK)
[  1888.890] ukiOpenByBusid: ukiOpenMinor returns 14
[  1888.890] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1888.953] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[  1888.954] ukiDynamicMajor: found major device number 246
[  1888.954] ukiDynamicMajor: found major device number 246
[  1888.954] ukiDynamicMajor: found major device number 246
[  1888.954] ukiOpenDevice: node name is /dev/ati/card0
[  1888.955] ukiOpenDevice: open result is 15, (OK)
[  1888.955] ukiGetBusid returned 'PCI:0:1:0'
[  1888.955] ukiOpenDevice: node name is /dev/ati/card1
[  1888.955] ukiOpenDevice: open result is 15, (OK)
[  1888.955] ukiGetBusid returned 'PCI:1:0:0'
[  1888.955] ukiOpenDevice: node name is /dev/ati/card2
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: Open failed
[  1888.955] ukiOpenDevice: node name is /dev/ati/card3
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: Open failed
[  1888.955] ukiOpenDevice: node name is /dev/ati/card4
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: Open failed
[  1888.955] ukiOpenDevice: node name is /dev/ati/card5
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: Open failed
[  1888.955] ukiOpenDevice: node name is /dev/ati/card6
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: Open failed
[  1888.955] ukiOpenDevice: node name is /dev/ati/card7
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: Open failed
[  1888.955] ukiOpenDevice: node name is /dev/ati/card8
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: Open failed
[  1888.955] ukiOpenDevice: node name is /dev/ati/card9
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: open result is -1, (No such device)
[  1888.955] ukiOpenDevice: Open failed
[  1888.956] ukiOpenDevice: node name is /dev/ati/card10
[  1888.956] ukiOpenDevice: open result is -1, (No such device)
[  1888.956] ukiOpenDevice: open result is -1, (No such device)
[  1888.956] ukiOpenDevice: Open failed
[  1888.956] ukiOpenDevice: node name is /dev/ati/card11
[  1888.956] ukiOpenDevice: open result is -1, (No such device)
[  1888.956] ukiOpenDevice: open result is -1, (No such device)
[  1888.956] ukiOpenDevice: Open failed
[  1888.956] ukiOpenDevice: node name is /dev/ati/card12
[  1888.956] ukiOpenDevice: open result is -1, (No such device)
[  1888.956] ukiOpenDevice: open result is -1, (No such device)
[  1888.956] ukiOpenDevice: Open failed
[  1888.956] ukiOpenDevice: node name is /dev/ati/card13
[  1888.956] ukiOpenDevice: open result is -1, (No such device)
[  1888.956] ukiOpenDevice: open result is -1, (No such device)
[  1888.956] ukiOpenDevice: Open failed
[  1888.956] ukiOpenDevice: node name is /dev/ati/card14
[  1888.956] ukiOpenDevice: open result is -1, (No such device)
[  1888.956] ukiOpenDevice: open result is -1, (No such device)
[  1888.956] ukiOpenDevice: Open failed
[  1888.956] ukiOpenDevice: node name is /dev/ati/card15
[  1888.956] ukiOpenDevice: open result is -1, (No such device)
[  1888.956] ukiOpenDevice: open result is -1, (No such device)
[  1888.956] ukiOpenDevice: Open failed
[  1888.956] ukiDynamicMajor: found major device number 246
[  1888.956] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[  1888.956] ukiOpenDevice: node name is /dev/ati/card0
[  1888.956] ukiOpenDevice: open result is 15, (OK)
[  1888.956] ukiOpenByBusid: ukiOpenMinor returns 15
[  1888.956] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1888.979] (II) fglrx(0): Setting screen physical size to 423 x 238
[  1888.993] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[  1888.998] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  1888.998] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1888.998] (II) LoadModule: "evdev"
[  1888.998] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1888.999] (II) Module evdev: vendor="X.Org Foundation"
[  1888.999] 	compiled for 1.17.2, module version = 2.9.2
[  1888.999] 	Module class: X.Org XInput Driver
[  1888.999] 	ABI class: X.Org XInput driver, version 21.0
[  1888.999] (II) Using input driver 'evdev' for 'Power Button'
[  1888.999] (**) Power Button: always reports core events
[  1888.999] (**) evdev: Power Button: Device: "/dev/input/event2"
[  1888.999] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1888.999] (--) evdev: Power Button: Found keys
[  1888.999] (II) evdev: Power Button: Configuring as keyboard
[  1888.999] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[  1888.999] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1888.999] (**) Option "xkb_rules" "evdev"
[  1888.999] (**) Option "xkb_model" "pc105"
[  1888.999] (**) Option "xkb_layout" "fr"
[  1888.999] (**) Option "xkb_variant" "latin9"
[  1889.002] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[  1889.004] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[  1889.004] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1889.004] (II) Using input driver 'evdev' for 'Video Bus'
[  1889.004] (**) Video Bus: always reports core events
[  1889.004] (**) evdev: Video Bus: Device: "/dev/input/event8"
[  1889.004] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  1889.004] (--) evdev: Video Bus: Found keys
[  1889.004] (II) evdev: Video Bus: Configuring as keyboard
[  1889.004] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event8"
[  1889.004] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1889.004] (**) Option "xkb_rules" "evdev"
[  1889.004] (**) Option "xkb_model" "pc105"
[  1889.004] (**) Option "xkb_layout" "fr"
[  1889.004] (**) Option "xkb_variant" "latin9"
[  1889.005] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[  1889.005] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1889.005] (II) Using input driver 'evdev' for 'Video Bus'
[  1889.005] (**) Video Bus: always reports core events
[  1889.005] (**) evdev: Video Bus: Device: "/dev/input/event9"
[  1889.005] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  1889.005] (--) evdev: Video Bus: Found keys
[  1889.005] (II) evdev: Video Bus: Configuring as keyboard
[  1889.005] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:01/input/input10/event9"
[  1889.005] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  1889.005] (**) Option "xkb_rules" "evdev"
[  1889.005] (**) Option "xkb_model" "pc105"
[  1889.005] (**) Option "xkb_layout" "fr"
[  1889.005] (**) Option "xkb_variant" "latin9"
[  1889.006] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[  1889.006] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1889.006] (II) Using input driver 'evdev' for 'Power Button'
[  1889.006] (**) Power Button: always reports core events
[  1889.006] (**) evdev: Power Button: Device: "/dev/input/event0"
[  1889.006] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1889.006] (--) evdev: Power Button: Found keys
[  1889.006] (II) evdev: Power Button: Configuring as keyboard
[  1889.006] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[  1889.006] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[  1889.006] (**) Option "xkb_rules" "evdev"
[  1889.006] (**) Option "xkb_model" "pc105"
[  1889.006] (**) Option "xkb_layout" "fr"
[  1889.006] (**) Option "xkb_variant" "latin9"
[  1889.007] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  1889.007] (II) No input driver specified, ignoring this device.
[  1889.007] (II) This device may have been added with another device file.
[  1889.007] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[  1889.007] (II) No input driver specified, ignoring this device.
[  1889.007] (II) This device may have been added with another device file.
[  1889.007] (II) config/udev: Adding input device Logitech Logitech USB Headset (/dev/input/event4)
[  1889.007] (**) Logitech Logitech USB Headset: Applying InputClass "evdev keyboard catchall"
[  1889.008] (II) Using input driver 'evdev' for 'Logitech Logitech USB Headset'
[  1889.008] (**) Logitech Logitech USB Headset: always reports core events
[  1889.008] (**) evdev: Logitech Logitech USB Headset: Device: "/dev/input/event4"
[  1889.008] (--) evdev: Logitech Logitech USB Headset: Vendor 0x46d Product 0xa44
[  1889.008] (--) evdev: Logitech Logitech USB Headset: Found keys
[  1889.008] (II) evdev: Logitech Logitech USB Headset: Configuring as keyboard
[  1889.008] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.3/0003:046D:0A44.0001/input/input6/event4"
[  1889.008] (II) XINPUT: Adding extended input device "Logitech Logitech USB Headset" (type: KEYBOARD, id 10)
[  1889.008] (**) Option "xkb_rules" "evdev"
[  1889.008] (**) Option "xkb_model" "pc105"
[  1889.008] (**) Option "xkb_layout" "fr"
[  1889.008] (**) Option "xkb_variant" "latin9"
[  1889.009] (II) config/udev: Adding input device PixArt HP X500 USB Optical Mouse (/dev/input/event5)
[  1889.009] (**) PixArt HP X500 USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[  1889.009] (II) Using input driver 'evdev' for 'PixArt HP X500 USB Optical Mouse'
[  1889.009] (**) PixArt HP X500 USB Optical Mouse: always reports core events
[  1889.009] (**) evdev: PixArt HP X500 USB Optical Mouse: Device: "/dev/input/event5"
[  1889.064] (--) evdev: PixArt HP X500 USB Optical Mouse: Vendor 0x3f0 Product 0x941
[  1889.064] (--) evdev: PixArt HP X500 USB Optical Mouse: Found 3 mouse buttons
[  1889.064] (--) evdev: PixArt HP X500 USB Optical Mouse: Found scroll wheel(s)
[  1889.064] (--) evdev: PixArt HP X500 USB Optical Mouse: Found relative axes
[  1889.064] (--) evdev: PixArt HP X500 USB Optical Mouse: Found x and y relative axes
[  1889.064] (II) evdev: PixArt HP X500 USB Optical Mouse: Configuring as mouse
[  1889.064] (II) evdev: PixArt HP X500 USB Optical Mouse: Adding scrollwheel support
[  1889.064] (**) evdev: PixArt HP X500 USB Optical Mouse: YAxisMapping: buttons 4 and 5
[  1889.064] (**) evdev: PixArt HP X500 USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1889.064] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:03F0:0941.0002/input/input7/event5"
[  1889.065] (II) XINPUT: Adding extended input device "PixArt HP X500 USB Optical Mouse" (type: MOUSE, id 11)
[  1889.065] (II) evdev: PixArt HP X500 USB Optical Mouse: initialized for relative axes.
[  1889.065] (**) PixArt HP X500 USB Optical Mouse: (accel) keeping acceleration scheme 1
[  1889.065] (**) PixArt HP X500 USB Optical Mouse: (accel) acceleration profile 0
[  1889.065] (**) PixArt HP X500 USB Optical Mouse: (accel) acceleration factor: 2.000
[  1889.065] (**) PixArt HP X500 USB Optical Mouse: (accel) acceleration threshold: 4
[  1889.066] (II) config/udev: Adding input device PixArt HP X500 USB Optical Mouse (/dev/input/mouse0)
[  1889.066] (II) No input driver specified, ignoring this device.
[  1889.066] (II) This device may have been added with another device file.
[  1889.067] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event15)
[  1889.067] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
[  1889.067] (II) Using input driver 'evdev' for 'HP Truevision HD'
[  1889.068] (**) HP Truevision HD: always reports core events
[  1889.068] (**) evdev: HP Truevision HD: Device: "/dev/input/event15"
[  1889.068] (--) evdev: HP Truevision HD: Vendor 0x64e Product 0x930a
[  1889.068] (--) evdev: HP Truevision HD: Found keys
[  1889.068] (II) evdev: HP Truevision HD: Configuring as keyboard
[  1889.068] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input16/event15"
[  1889.068] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 12)
[  1889.068] (**) Option "xkb_rules" "evdev"
[  1889.068] (**) Option "xkb_model" "pc105"
[  1889.068] (**) Option "xkb_layout" "fr"
[  1889.068] (**) Option "xkb_variant" "latin9"
[  1889.070] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event12)
[  1889.070] (II) No input driver specified, ignoring this device.
[  1889.070] (II) This device may have been added with another device file.
[  1889.070] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event13)
[  1889.070] (II) No input driver specified, ignoring this device.
[  1889.070] (II) This device may have been added with another device file.
[  1889.071] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[  1889.071] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1889.071] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  1889.071] (**) AT Translated Set 2 keyboard: always reports core events
[  1889.072] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[  1889.072] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  1889.072] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  1889.072] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  1889.072] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[  1889.072] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[  1889.072] (**) Option "xkb_rules" "evdev"
[  1889.072] (**) Option "xkb_model" "pc105"
[  1889.072] (**) Option "xkb_layout" "fr"
[  1889.072] (**) Option "xkb_variant" "latin9"
[  1889.074] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[  1889.074] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  1889.074] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  1889.074] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[  1889.074] (II) LoadModule: "synaptics"
[  1889.075] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  1889.075] (II) Module synaptics: vendor="X.Org Foundation"
[  1889.075] 	compiled for 1.17.2, module version = 1.8.2
[  1889.075] 	Module class: X.Org XInput Driver
[  1889.075] 	ABI class: X.Org XInput driver, version 21.0
[  1889.075] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  1889.075] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1889.075] (**) Option "Device" "/dev/input/event6"
[  1889.096] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[  1889.096] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1326 - 5656 (res 41)
[  1889.097] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1200 - 4712 (res 58)
[  1889.097] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  1889.097] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  1889.097] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[  1889.097] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[  1889.097] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[  1889.097] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1889.097] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1889.108] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event6"
[  1889.108] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[  1889.108] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  1889.108] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[  1889.108] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[  1889.109] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  1889.109] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  1889.109] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  1889.109] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  1889.109] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1889.110] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[  1889.110] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[  1889.111] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event10)
[  1889.111] (II) No input driver specified, ignoring this device.
[  1889.111] (II) This device may have been added with another device file.
[  1889.112] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[  1889.112] (II) No input driver specified, ignoring this device.
[  1889.112] (II) This device may have been added with another device file.
[  1889.117] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event14)
[  1889.117] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  1889.117] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[  1889.117] (**) HP WMI hotkeys: always reports core events
[  1889.117] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event14"
[  1889.117] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[  1889.117] (--) evdev: HP WMI hotkeys: Found keys
[  1889.117] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[  1889.117] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event14"
[  1889.117] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
[  1889.117] (**) Option "xkb_rules" "evdev"
[  1889.117] (**) Option "xkb_model" "pc105"
[  1889.117] (**) Option "xkb_layout" "fr"
[  1889.117] (**) Option "xkb_variant" "latin9"
[  1889.118] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event7)
[  1889.118] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[  1889.118] (II) Using input driver 'evdev' for 'HP Wireless hotkeys'
[  1889.118] (**) HP Wireless hotkeys: always reports core events
[  1889.118] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event7"
[  1889.118] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0
[  1889.118] (--) evdev: HP Wireless hotkeys: Found keys
[  1889.118] (II) evdev: HP Wireless hotkeys: Configuring as keyboard
[  1889.118] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"
[  1889.118] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 16)
[  1889.118] (**) Option "xkb_rules" "evdev"
[  1889.118] (**) Option "xkb_model" "pc105"
[  1889.118] (**) Option "xkb_layout" "fr"
[  1889.118] (**) Option "xkb_variant" "latin9"
[  1889.125] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[  1889.928] (WW) fglrx(0): Failed to get EDID by ACPI
[  1889.928] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[  1889.928] (II) fglrx(0): Printing DDC gathered Modelines:
[  1889.928] (II) fglrx(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (55.9 kHz eP)
[  1889.928] (II) fglrx(0): Modeline "1600x900"x0.0   71.87  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (37.2 kHz e)
[  1890.185] (WW) fglrx(0): Failed to get EDID by ACPI
[  1890.185] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[  1890.185] (II) fglrx(0): Printing DDC gathered Modelines:
[  1890.185] (II) fglrx(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (55.9 kHz eP)
[  1890.185] (II) fglrx(0): Modeline "1600x900"x0.0   71.87  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (37.2 kHz e)
[  1892.996] (WW) fglrx(0): Failed to get EDID by ACPI
[  1892.996] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[  1892.996] (II) fglrx(0): Printing DDC gathered Modelines:
[  1892.996] (II) fglrx(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (55.9 kHz eP)
[  1892.996] (II) fglrx(0): Modeline "1600x900"x0.0   71.87  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (37.2 kHz e)
[  1893.865] (WW) fglrx(0): Failed to get EDID by ACPI
[  1893.866] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[  1893.866] (II) fglrx(0): Printing DDC gathered Modelines:
[  1893.866] (II) fglrx(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (55.9 kHz eP)
[  1893.866] (II) fglrx(0): Modeline "1600x900"x0.0   71.87  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (37.2 kHz e)
[  1893.988] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[  1894.057] (II) XKB: reuse xkmfile /var/lib/xkb/server-FCE784E457E827DE63A60012DC8F25390069A73C.xkm
[  1894.107] (WW) fglrx(0): Failed to get EDID by ACPI
[  1894.107] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[  1894.107] (II) fglrx(0): Printing DDC gathered Modelines:
[  1894.107] (II) fglrx(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (55.9 kHz eP)
[  1894.107] (II) fglrx(0): Modeline "1600x900"x0.0   71.87  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (37.2 kHz e)
[  1894.297] (WW) fglrx(0): Failed to get EDID by ACPI
[  1894.297] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[  1894.297] (II) fglrx(0): Printing DDC gathered Modelines:
[  1894.297] (II) fglrx(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (55.9 kHz eP)
[  1894.297] (II) fglrx(0): Modeline "1600x900"x0.0   71.87  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (37.2 kHz e)
[  1894.493] (WW) fglrx(0): Failed to get EDID by ACPI
[  1894.493] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[  1894.493] (II) fglrx(0): Printing DDC gathered Modelines:
[  1894.493] (II) fglrx(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (55.9 kHz eP)
[  1894.493] (II) fglrx(0): Modeline "1600x900"x0.0   71.87  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (37.2 kHz e)
[  1895.862] (II) XKB: reuse xkmfile /var/lib/xkb/server-1BB3DE285E70FB9185F4D20DA8259C6A5B347C21.xkm
[  1909.939] (WW) fglrx(0): Failed to get EDID by ACPI
[  1909.939] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[  1909.939] (II) fglrx(0): Printing DDC gathered Modelines:
[  1909.939] (II) fglrx(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (55.9 kHz eP)
[  1909.939] (II) fglrx(0): Modeline "1600x900"x0.0   71.87  1600 1648 1680 1930  900 903 909 928 -hsync -vsync (37.2 kHz e)

F50

Re : [Abandonné] Double carte graphique

Poste /var/log/Xorg.0.log après avoir changé de carte > logout/login.

Velkynn

Re : [Abandonné] Double carte graphique

C'est exactement ce que j'ai fais. xD La R7 n'apparaît pas. Après avoir switch entre igpu/dgpu une quinzaine de fois, avoir fait des dizaines de testes, les résultat restent exactement les mêmes, la R5 qui travaille et la R7 qui semble  inexistante.

F50

Re : [Abandonné] Double carte graphique

Ok.

Que donne le retour de :

sudo aticonfig --list-adapters

D'après ce que j'ai lu quelque part, il y a une option à activer dans le BIOS, fais-y un tour histoire de voir ce qu'il y a.

Velkynn

Re : [Abandonné] Double carte graphique

Ça donne ça :

* 0. 00:01.0 AMD Radeon(TM) R5 Graphics         
  1. 01:00.0 AMD Radeon (TM) R7 M360

* - Default adapter

Velkynn

Re : [Abandonné] Double carte graphique

J'ai regardé dans le BIOS et je n'ai toujours rien trouvé. Aucune option qui me permet de switch de l'une à l'autre et toujours aucune trace de la R7.

MrKebi

Re : [Abandonné] Double carte graphique

Tu n'as pas d'option genre, "graphique commutable fixe" et/ou "graphique commutable dynamique" ?

---

PC : i7-4770k 24Go RX 580 120Go SSD + 1Tox2 HDD: Archlinux/Plasma
Laptop 1 : ThinkPad p50 i7-6820HQ 32Go 256Gox2 SSD + 500Go HDD : Archlinux/Plasma, optimus-manager
Laptop 2 : Xiaomi Mi Notebook Pro i5-8250u 8Go 240Go msata : Archlinux/XFCE, optimus-manager
Laptop 3 : HP Pavillion g6 1354ef i5-2450m 4Go 120Go SSD : Archlinux/Plasma

Velkynn

Re : [Abandonné] Double carte graphique

Nope, rien de ce genre. J'ai cherché dans tous les menus. Et rien non plus dans le manuel du BIOS.

Velkynn

Re : [Abandonné] Double carte graphique

Bon, je vais définitivement abandonner repasser sous Windows, ce sera beaucoup plus simple. Je reviendrais certainement sur Ubuntu lorsque j'aurai autre chose qu'un HP Pavilion avec AMD.
Je vous remercie quand même de votre aide !

F50

Re : [Abandonné] Double carte graphique

Avant de repasser sous w$ essaye cette commande :

aticonfig --adapter=all --initial

Reboot puis, switch sur la discrète et donne le retour de :

sudo aticonfig --list-adapters

Dernière modification par F50 (Le 17/04/2016, à 07:57)